Search Results

Search found 59554 results on 2383 pages for 'distributed data mining'.

Page 700/2383 | < Previous Page | 696 697 698 699 700 701 702 703 704 705 706 707  | Next Page >

  • RODBC sqlSave and column names

    - by waanders
    I've a question about using sqlSave. How maps RODBC data in the data frame to the database table columns? If I've a table with columns X and Y and a data frame with columns X and Y, RODBC puts X into X and Y into Y (I found out by trail-and-error). But can I explicitly tell R how to map data.frame columns to database table columns, like put A in X and B in Y. I'm rather new to R and think the RODBC manual is a bit cryptic. Nor can I find an example on the internet.

    Read the article

  • Improve Efficiency in Array comparison in Ruby

    - by user2985025
    Hi I am working on Ruby /cucumber and have an requirement to develop a comparison module/program to compare two files. Below are the requirements The project is a migration project . Data from one application is moved to another Need to compare the data from the existing application against the new ones. Solution : I have developed a comparison engine in Ruby for the above requirement. a) Get the data, de duplicated and sorted from both the DB's b) Put the data in a text file with "||" as delimiter c) Use the key columns (number) that provides a unique record in the db to compare the two files For ex File1 has 1,2,3,4,5,6 and file2 has 1,2,3,4,5,7 and the columns 1,2,3,4,5 are key columns. I use these key columns and compare 6 and 7 which results in a fail. Issue : The major issue we are facing here is if the mismatches are more than 70% for 100,000 records or more the comparison time is large. If the mismatches are less than 40% then comparison time is ok. Diff and Diff -LCS will not work in this case because we need key columns to arrive at accurate data comparison between two applications. Is there any other method to efficiently reduce the time if the mismatches are more thatn 70% for 100,000 records or more. Thanks

    Read the article

  • ResultSet and aggregation

    - by kachanov
    Ok, I admit my situation is special There is a data system that supports SQL-92 and JDBC interface However the SQL requets are pretty expensive, and in my application I need to retreive the same data multiple times and aggregate it ("group by") on different fields to show different dimensions of the same data. For example on one screen I have three tables that show the same set or records but aggregated by City (1st grid), by Population (2nd grid), by number of babies (3rd grid) This amounts to 3 SQL queries (which is very slow), UNLESS anyone of you can suggest any idea any library from apache commons or from google code, so that I can select all records into ResultSet and get 3 arrays of data group by different fields from this single ResultSet. Am I'm missing some obvious and unexpected solution to this problem?

    Read the article

  • Autocomplete jQuery 1.8-UI JSON Format

    - by Kezzer
    I'm toying with the new autocomplete in jQuery 1.8-UI. I've provided data in the following format ["val1", "val2", "val3"] This is coming from a stored procedure but output as a string. For some reason this doesn't work at all, however, if I supply the same data using a javascript variable var data = ["val1", "val2", "val3"]; Then this works fine. <script type="text/javascript"> $(function() $("#txtClient").autocomplete({ source: "/intranet/common/scripts/IntranetLists.aspx?ListType=C" }); }); </script> I've got a page which supplies whatever data I want using query strings. It's more temporary, but it worked when I previously used bassistence's autocomplete. Any ideas?

    Read the article

  • Anova test in the loop and outputing the p-value in separate column

    - by Juanhijuan
    Once again I'm trying to get an answer. I am already stuck for like 5h with that so that's why I keep trying to get an answer. That's my data: id Sequence variable value 75 AAAAGAAAVANQGKK BiotinControl1_2 3893050.50 192 AAAAGAAAVANQGKK BiotinControl1_2 900604.61 3770 AAFTKLDQVWGSE BiotinControl1_2 90008.14 The code which I am trying to use to calculate the p-value: My Code: tbl_anv <- tbl_all_onlyK[,c("id", "BiotinControl1_2", "BiotinControl2", "BiotinControl3", "BiotinTreatment1_2", "BiotinTreatment2", "BiotinTreatment3", "Sequence")] tbl_reo <- melt(tbl_anv, measure.vars=2:7) set.seed(1) vars <- c("id", "BiotinControl1_2", "BiotinControl2", "BiotinControl3", "BiotinTreatment1_2", "BiotinTreatment2", "BiotinTreatment3", "Sequence") tbl_reo <- as.data.frame(tbl_reo) by(tbl_reo,tbl_reo$Sequence,function(x){ anova(lm(value ~ variable, data = x))$"Pr(>F)"[1] }) An error ocurs: There were 50 or more warnings (use warnings() to see the first 50) Anyway, how can I do that and export the p-value in the separate column. That's what I tried to do on my own: aov_test <- by(tbl_reo,tbl_reo$Sequence,function(x){ anova(lm(value ~ variable, data = x))$"Pr(>F)"[1] }) tbl_reo[,5] <- aov.test[[1]]$'Pr(>F)'[1]

    Read the article

  • Is it possible in Perl to require a subroutine call is made?

    - by MitchelWB
    I don't know enough about Perl to even know what I'm asking for exactly, but I'm writing a series of subroutines to be available for many individual scripts that all process different incoming flat files. The process is far from perfect, but it's what I've got to deal with and I'm trying to build myself a small library of subs that make it easier for me to manage it all. Each script handles a different incoming flat file with it's own formatting, sorting, grouping and outputting requirements. One common aspect is that we have small text files that house counters that are used to name the output files so that we have no duplicate file names. Because the processing of the data is different for each file, I need to open the file to get my counter value, because this is a common operation, I'd like to put it in a sub to retrieve the counter. But then need to write specific code to process the data. And would like a second sub that allows me to update the counter with the counter once I've processed the data. Is there a way to make the second sub call a requirement if the first one is called? Ideally if it could even be an error that would prevent the script from running at all much like a syntax error. EDIT: Here is a little [ugly and simplified] psuedo-code to give a better feel for what the current process is: require "importLibrary.plx"; #open data source file open DataIn, $filename; #call getCounterInfo from importLibrary.plx to get the counter value from counter file $counter = &getCounterInfo($counterFileName); while (<DataIn>) { #Process data based on unique formatting and requirements #output to task files based on requirements and name files using the $counter #increment $counter } #update counter file with new value of $counter &updateCounterInfo($counter);

    Read the article

  • Projects integration question

    - by qkrsppopcmpt
    Other team has one legacy system, which is data aggregators. It is implemented as web service using JAVA, SOAP,MTOM,Tomcat and Axis2. They have wsdl files defining functionalities such as search, retrieve data, upload, download. Our team has a new developed website which is developed using RoR with mySQL. It is sort of social networking. Users can register, add friends, upload images, videos. Also, they can search data. We are required to connect the two systems. One possible solution I think is - Adding components into our website. The component invoke services on the aggregators. - Synchronize website database to the aggregators. My doubts are: 1. How to add components in our websites? The components should use Java or Ruby or adapter from java to ruby. It is possible using ruby invoke web service. I think it should work since it is the point of web service. If so, can ruby call those services in wsdl directly? But how to deal with those different data structure? How to synchroinze our database to the aggregators. I think the best way is also through web service invocation such as upload. That means, we have to export the db records into xml files and then write some tools to upload. The web service project support MTOM. So, it is fine to upload huge data. Am I on the right record? Can anybody give me some hint. Thanks.

    Read the article

  • how to get inbox mails in listview using vb.net?

    - by meenakshi
    I'm trying to collect (yahoo,gmail,hotmail etc.,)inbox mails uding vb.net? i tried this using tcpclient, First i got the tcpclient connection,and get response data from server for (gmail --host-- "pop.gmail.com") got response like "+OK Gpop ready for requests from 122.174.183.249 b15pf3378725rvn.27" second,i'm trying to get response data from server for my username and password it shows message "Unable to read data from the transport connection: An established connection was aborted by the software in your host machine." how can i solve this? Please help me.

    Read the article

  • using subset but old variables still left

    - by user2520852
    I am working with a data set, which is basically daily usage data (let's just say variable X and Y) by different cities (about 150 cities). I have created a subset of data for only specific cities, choosing just 3 of the 150 cities. Then when I do tapply by cities, I get means for 3 cities but also get NA for all other 147 cities that was in the data set. I am using the below coding df<-read.csv(...) df_sub<-subset(df,df$City==1|df$City==3|df$City==19) X_Breakdown<-tapply(X,df_sub$City, mean, na.rm=TRUE) Print(X_Breakdown) City 1 City 2 15 NA City 3 City 4 12 NA City 5 City 6 NA NA Hope you get the idea. I would like to get a dataset that only contains the 3 cities that I'm interested in. It seems that the set of variables is encoded in R, is there a way to fix this? Kindly advise. Thanks

    Read the article

  • .NET 3.5 DataGridView Wont Save To Database

    - by Jimbo
    I have created a test Winforms application in Visual Studio 2008 (SP1) to see just how "RAD" C# and .NET 3.5 can be. So far I have mixed emotions. Added a service-based database to my application (MyDB.mdf) and added two tables - Contact (id [identity], name [varchar] and number [varchar] columns) and Group (id [identity] and name [varchar] columns) Added a DataSource, selected "Database" as the source, used the default connection string as the connection (which points to my database) and selected "All Tables" to be included in the data source and saved as MyDBDataSet Expanded the data source showing my two tables, selected the "Group" table and chose to display it as a DataGridView (from the dropdown option on the right of each entity) and dragged it onto Form1, thus creating a groupBindingNavigator, groupBindingSource, groupTableAdapter, tableAdapterManager, myDBDataset and groupDataGridView Press F5 to test the application, enter the name "Test" under the DataGridView's "name" column and click "Save" on the navigator which has autogenerated code to save the data that looks like this: private void groupBindingNavigatorSaveItem_Click(object sender, EventArgs e) { this.Validate(); this.groupBindingSource.EndEdit(); this.tableAdapterManager.UpdateAll(this.myDBDataSet); } Stop the application and have a look at the database data, you will see no data saved there in the "Group" table. I dont know why and cant find out how to fix it! Googled for about 30 minutes with no luck. The code is auto-generated with the controls, so you'd think that it would work too :)

    Read the article

  • Jquery cycle plugin and image tag from code behind

    - by Geetha
    Hi All, I am using cycle plugin to show images. I am binding the html code for image from code behind. Problem: Images are not getting displayed. If i hard coded the image tag it is working. Code: $(window).load(function() { $.ajax({ type: "POST", contentType: "application/json; charset=utf-8", data: "{}", url: "Default.aspx/GetImage", dataType: "json", success: function(data) { alert(data.d); $("#sample").html(data.d); $('#sample').cycle({ fx: 'fade', continuous: true, speed: 7500, timeout: 55000, pause: 1, sync: 1 }); } }); }); Data.d will give: <img src="Images/Frontbanner/s0.jpg" width="664" height="428" border="0" /> <img src="Images/Frontbanner/s111.jpg" width="664" height="428" border="0" /> <img src="Images/Frontbanner/s112.jpg" width="664" height="428" border="0" /> <img src="Images/Frontbanner/s113.jpg" width="664" height="428" border="0" /> <img src="Images/Frontbanner/s114.jpg" width="664" height="428" border="0" /> <img src="Images/Frontbanner/s115.jpg" width="664" height="428" border="0" /> <img src="Images/Frontbanner/s116.jpg" width="664" height="428" border="0" />

    Read the article

  • Best option for Google App Engine Datastore and external database?

    - by Alex
    I need to get an App Engine app talking to and sharing data with an external database, The best option i can come up with is outputting the external database data to an xml file and then processing this in my app engine app and storing it inside the datastore, although the data being shared is sensitive data such as login details so outputting this to an xml file is not exactly a great idea, is it possible for the app engine app to directly query the database? or is there a secure option for using xml files? oh and im using python/django and the external database will be hosted on another domain

    Read the article

  • R: Are there any alternatives to loops for subsetting from an optimization standpoint?

    - by Adam
    A recurring analysis paradigm I encounter in my research is the need to subset based on all different group id values, performing statistical analysis on each group in turn, and putting the results in an output matrix for further processing/summarizing. How I typically do this in R is something like the following: data.mat <- read.csv("...") groupids <- unique(data.mat$ID) #Assume there are then 100 unique groups results <- matrix(rep("NA",300),ncol=3,nrow=100) for(i in 1:100) { tempmat <- subset(data.mat,ID==groupids[i]) #Run various stats on tempmat (correlations, regressions, etc), checking to #make sure this specific group doesn't have NAs in the variables I'm using #and assign results to x, y, and z, for example. results[i,1] <- x results[i,2] <- y results[i,3] <- z } This ends up working for me, but depending on the size of the data and the number of groups I'm working with, this can take up to three days. Besides branching out into parallel processing, is there any "trick" for making something like this run faster? For instance, converting the loops into something else (something like an apply with a function containing the stats I want to run inside the loop), or eliminating the need to actually assign the subset of data to a variable?

    Read the article

  • R- delete rows in multiple columns by unique number

    - by Vincent Moriarty
    Given data like this C1<-c(3,-999.000,4,4,5) C2<-c(3,7,3,4,5) C3<-c(5,4,3,6,-999.000) DF<-data.frame(ID=c("A","B","C","D","E"),C1=C1,C2=C2,C3=C3) How do I go about removing the -999.000 data in all of the columns I know this works per column DF2<-DF[!(DF$C1==-999.000 | DF$C2==-999.000 | DF$C3==-999.000),] But I'd like to avoid referencing each column. I am thinking there is an easy way to reference all of the columns in a particular data frame aka: DF3<-DF[!(DF[,]==-999.000),] or DF3<-DF[!(DF[,(2:4)]==-999.000),] but obviously these do not work And out of curiosity, bonus points if you can me why I need that last comma before the ending square bracket as in: ==-999.000),]

    Read the article

  • Ajax request (from .NET) give me unexpected results

    - by ironnailpiercethesky
    I wanted to learn a little more about web and .NET so i decided to write a program to download binaries, webpages and does a little ajax. The first download site i tried was too easy. So i went against uploading.com. It seemed good, no captcha, some ajax use required, you cant guess all the data, it was perfect. After 2hours of messing around i got frustrated. For the life of me i could not get the ajax response to give me what i was expecting. I decided to use tamper data clear my cookies, click on the entry for the ajax request. Copy the Referer, cookies and postdata and came up with this code. It does not work! I am shocked that copying those fields did not work. I even tried setting the user agent (not in code linked) and it still did not work. Why isnt this POST on the ajax request not giving me the correct file? I notice the JsHttpRequest=12719132559480-xml changes based on time so if you want to run the code you should grab a new snapshot with tamperdata (or at least update that url). I dont see any extra headers in tamper data so does anyone know why i might not be getting the response expected? I know disabling cookies or javascript will make the link 'expired' automatically. I dont think javascript will matter because i got the data from tamperdata at the moment of request so what gives? What am i forgetting or what data am i not submitting properly?

    Read the article

  • how to implement social drm in java?

    - by pcassiano
    how to implement social drm in java? how could i insert 'personal data' inside an e-book (.pdf or epub) automatically? i think in an software interface where consumer could insert his personal data and the system generates an e-book (locked) with these data... how could i implement this? tips?

    Read the article

  • ASP.NET SqlDataSource update and create FK reference

    - by William
    The short version: I have a grid view bound to a data source which has a SelectCommand with a left join in it because the FK can be null. On Update I want to create a record in the FK table if the FK is null and then update the parent table with the new records ID. Is this possible to do with just SqlDataSources? The detailed version: I have two tables: Company and Address. The column Company.AddressId can be null. On my ascx page I am using a SqlDataSource to select a left join of company and address and a GridView to display the results. By having my UpdateCommand and DeleteCommand of the SqlDataSource execute two statements separated by a semi-colon I am able to use the GridView's Edit and Delete functionality to update both table simultaneously. The problem I have is when the Company.AddressId is null. What I need to have happen is have the data source create a record in the Address table and then update the Company table with the new Address.ID then proceed with the update as usual. I would like to do this with just data sources if possible for consistency/simplicity sake. Is it possible to have my data source do this, or perhaps add a second data source to the page to handle some of this? Once I have that working I can probably figure out how to make it work with the InsertCommand as well but if you are on a roll and have an answer for how to make that fly as well feel free to provide it. Thanks.

    Read the article

  • gMaps suddenly stopped working : Can't find variable: G_NORMAL_MAP

    - by Luca
    hello! i inject a map on my div called "concessionario-map" with GMap, a jquery plugin. Gmap everything works fine until this morning. now the debugger says: ReferenceError: Can't find variable: G_NORMAL_MAP i just search on google and i read some similar situation, but i dont find a case like mine. please, can you help me? thanks a lot in advance :) (full code) $.getJSON("http://maps.google.com/maps/geo?q="+loc+"&key=ABQIAAAAgDXoBEgIn38xaRBBqo6ygxTDjF32IQ1zA0BVcGSuGouGRvo0kRRKiyipbCniJWSso2scatdz36K-Mg&sensor=false&output=json&callback=?",function(data, textStatus) { long = data.Placemark[0].Point.coordinates[0]; lat = data.Placemark[0].Point.coordinates[1]; console.log(data); $('#concessionario-map').gMap( { scrollwheel: false, latitude: lat, longitude: long, zoom: 15, markers: [{ latitude: lat, longitude: long }], icon: { image: "files/images/gmap_pin_orange.png", shadow: "files/images/gmap_pin_orange_shadow.png", iconsize: [26, 46], shadowsize: [28, 48], iconanchor: [12,46], infowindowanchor: [12, 0] } }) });

    Read the article

  • SQL Server 2008 Insert performance issue

    - by mithiya
    is there any way to increase performance of SQL server inserts, as you can see below i have used below sql 2005, 2008 and oracle. i am moving data from ORACLe to SQL. while inserting data to SQL i am using a procedure. insert to Oracles is very fast in compare to SQL, is there any way increase performance. or a better way to move data from Oracle to SQL (data size approx 100000 records an hour) please find below stats as i gathered, RUN1 and RUN2 time is in millisecond.

    Read the article

  • Using memory mapping in C for reading binary

    - by user1320912
    I am trying to read data from a binary file and process it.It is a very large file so I thought I would use memory mapping. I am trying to use memory mapping so I can read the file byte by byte. I am getting a few compiler errors while doing this. I am doing this on a linux platform #include <unistd.h> #include <sys/types.h> #include <sys/mman.h> int fd; char *data; fd = open("data.bin", O_RDONLY); pagesize = 4000; data = mmap((caddr_t)0, pagesize, PROT_READ, MAP_SHARED, fd, pagesize); The errors i get are : caddr not initialized, R_RDONLY not initialized, mmap has too few arguments. Could someone help me out ?

    Read the article

  • JList not showing items or showing selectively.

    - by Avrahamshuk
    I have a Java Swing application using a JList to show some data from a DB. I am using DefaulListModel as the data model for the list in this way: void PopulateSoldiersList() { try { soldiersListModel = new DefaultListModel(); for (Soldier i : myBackEnd.GetAllSoldiers()) { soldiersListModel.addElement(i); } this.listSoldiers.setModel(soldiersListModel); } catch (Exception ex) {// Error Message} } And for some reason, the list just stays empty... I even did make sure at runtime that all the data is set up properly in the data model and even in the "dataModel" property of the JList! In other place at the app i have a similar problem, but there, sometimes the list show few items from the model (but not all of them) I have no idea where to go from here... please help. Thanks!

    Read the article

  • 500 internal server error at form connection

    - by klox
    hi..all..i've a problem i can't connect to database what's wrong with my code?this is my code: $("#mod").change(function() { var barcode; barCode=$("#mod").val(); var data=barCode.split(" "); $("#mod").val(data[0]); $("#seri").val(data[1]); var str=data[0]; var matches=str.match(/(EE|[EJU]).*(D)/i); $.ajax({ type:"post", url:"process1.php", data:"value="+matches+"action=tunermatches", cache:false, async:false, success: function(res){ $('#rslt').replaceWith( "<div id='value'><h6>Tuner range is" + res + " .</h6></div>" ); } }); }); and this is my process file: switch(postVar('action')) { case 'tunermatches' : tunermatches(postVar('tuner')); break; function tunermatches($tuner)){ $Tuner=mysql_real_escape_string($tuner); $sql= "SELECT remark FROM settingdata WHERE itemname="Tuner_range" AND itemdata="$Tunermatches"; $res=mysql_query($sql); $dat=mysql_fetch_array($res,MYSQL_NUM); if($dat[0]>0) { echo $dat[0]; } mysql_close($dbc); }

    Read the article

  • change img src on select box selection

    - by user1871596
    i have a form that auto populates input fields using jquery and ajax i can not get the img url to change in the img src when i select the option from dropdown my dropdown is dynamicaly populated here is is my function <script type="text/javascript"> $(document).ready(function(){ $("#id").change(function(){ $.ajax({ url : 'get_driver_data2.php', type : 'POST', dataType: 'json', data : $('#ContactTrucks').serialize(), success: function( data ) { for(var id in data) { $(id).val( data[id] ); } } }); }); }); </script> here is get_driver_data2.php <?php include ('dbc.php'); $id_selected = $_POST['id']; // Selected Id $query = "SELECT * from admin_dispatch_records where id = '$id_selected' AND driver LIKE '%$username%'"; $result = mysqli_query($dbcon, $query); while ($row = mysqli_fetch_array($result, MYSQLI_ASSOC)) { $eta = $row['eta']; $time = $row['dispatch_time']; $date = $row['dispatch_date']; $name = $row['name']; $phone = $row['phone']; $vehicleyear = $row['vehicleyear']; $color = $row['color']; $make = $row['make']; $model = $row['model']; $vin = $row['vin']; $plate = $row['plate']; $mileage = $row['mileage']; $pickup = $row['pickup']; $dropoff = $row['dropoff']; $price = $row['price']; $invoice = $row['invoice']; $cash = $row['cash']; $credit = $row['credit']; $check = $row['check']; $po = $row['po']; $billed = $row['billed']; $need_to_bill = $row['need_to_bill']; $getphoto = $row['image_path']; } $arr = array( 'input#eta' => $eta, 'input#dispatch_time' => $time, 'input#dispatch_date' => $date, 'input#name' => $name, 'input#phone' => $phone, 'input#vehicleyear' => $vehicleyear, 'input#color' => $color, 'input#make' => $make, 'input#model' => $model, 'input#vin' => $vin, 'input#plate' => $plate, 'input#mileage' => $mileage, 'textarea#pickup' => $pickup, 'textarea#dropoff' => $dropoff, 'input#price' => $price, 'input#invoice' => $invoice, 'input#cash' => $cash, 'input#credit' => $credit, 'input#check' => $check, 'input#po' => $po, 'input#billed' => $billed, 'input#need_to_bill' => $need_to_bill, 'image#image_path' => $getphoto); echo json_encode( $arr ); ?> a bit of the html <td> <img id="image_path" src="????" /> </td> </tr> </table> <p><strong> <input type="submit" value="Complete Dispatch"> </strong></p> how do i if at all possible populate the src with the database vaule ajax recieved when i change the select box all other data is populated and the string is returned correctlly i have tested that by placing an input box and calling input#image_path = $getphoto. is there syntax for an img tag like the input....textarea....etc. I have tried including the get....php inline and assigning the src to $getphoto no luck there I was looking at trying to make a hidden input field with the ajax passed data and then taking that data and making it a var but can not figure that out either. thanks

    Read the article

  • Simple image displaying php error

    - by Rani dubey
    In a query say i have a image path that have multiple images stored as path=http://localhost/images/xyz.When i run the code: <?php //Retrieves data from MySQL mysql_connect("localhost", "root", "") or die ("Could not save image name Error: " . mysql_error()); mysql_select_db("dawat") or die("Could not select database"); $data = mysql_query("SELECT 'images_path' FROM images_tbl") or die(mysql_error()); //Puts it into an array $file_path = 'http://localhost/images/xyz'; while($row = mysql_fetch_assoc( $data )) {//Outputs the image and other data $src=$file_path.$row["images_path"]; echo "<img src=".$src."> <br>"; } ?> Everything is working fine,but only images are not showing.On place of images it is showing small thumnails.Please suggest what to do.... Sql query i used is: CREATE TABLE images_tbl( images_id INT NOT NULL AUTO_INCREMENT, images_path VARCHAR(200) NOT NULL, submission_date DATE, PRIMARY KEY (images_id) );

    Read the article

< Previous Page | 696 697 698 699 700 701 702 703 704 705 706 707  | Next Page >