Search Results

Search found 59278 results on 2372 pages for 'time estimation'.

Page 700/2372 | < Previous Page | 696 697 698 699 700 701 702 703 704 705 706 707  | Next Page >

• httpd.config Easy Apache WHM CentOS

  - by jessie

  First let me explain how I got to this situation. I run a Streaming Video Site. Videos are about 100-250MB in size at any given time there are 500 people on the site. So I guess that would make then static. Recently My site started getting really slow and the only way to fix it temporarily was to restart apache. Now there was no change in traffic that could have caused this. My site is not being attacked. My hosting company recomended to implement mpm_mod and suPHP. They did that by using Easy Apache in WHMS. Then everything was working fine but a little slow. I researched around and to my understanding that mpm will do that but be more table. I was told that installing FastCGI would speed things up just enough. Well that made everything worse. The site is slow and time's out. I used WHM and took off fastCGI but its still the same, it seems like everything i do as of now nothing changes. I even did a roll back on the htconfig file but that didn't work. I'm not sure how to fix this. and my hosting network guy wont be able to touch the problem until Tuesday. I have root access.

  Read the article

• Excel file growing huge (>150 MB)

  - by Josh

  There is one particular Excel file that is used by a number of employees at my company. It is edited from both Excel 2003 and 2007, with the "Sharing" feature turned on to allow multiple writers at once. The file has a decent amount of data on several sheets with some basic formatting, and used to be about 6MB, which seems reasonable for its content. But after a few weeks of editing, the file grew to 10, then 20 MB, and eventually skyrocketed to more than 150 MB, even though it still has about the same amount of data as before. It now takes 5-10 minutes to open it, and that much time again to save it. The first time this happened, I copied the content of each sheet into a new, blank workbook, and saved the new workbook; this brought it back down to about 6MB. Now, it has blown up again. The workbook uses the "Data Validation" feature to limit the values in certain columns to the contents of a few named ranges. Copying all the data into a new workbook means re-setting up all the data validation, which is a pain and not something that we want to do every month. As a troubleshooting step, I tried saving the file in "XML Spreadsheet 2003" format, hoping to get some insight into what was being stored. Sure enough, the file was almost a gig, and almost all of the 10 million lines look like this: <NamedCell ss:Name="Z_21D5114F_E50C_46AC_AA4F_C3FF540C717F_.wvu.FilterData"/> <NamedCell ss:Name="Z_1EE2BA5E_3011_4F9A_8ACD_E58835250FC4_.wvu.FilterData"/> <NamedCell ss:Name="Z_1E3BDCEA_6A72_4ECC_BF4F_7B03CC66181E_.wvu.FilterData"/> I've seen a few VBScripts online to manage and enumerate named cells that are hidden in Excel's built-in interface, though I wonder how they'd handle my 10 million named cells. What I really need, though, is an understanding of why this keeps happening. What actions in excel could be causing this?

  Read the article

• SQL Server 2005 SP3 on Windows 7 - No Management Studio

  - by Mike Thomas

  I've been trying for a day and a half now to get SQL Server 2005, DEV edition, to work on Windows 7, 64 bit prof. I install from the disk, then run SP 3. I get a failure on the Client Components section of the Installation Progress along with this vague message - Product : Client Components Product Version (Previous): 1399 Product Version (Final) : Status : Failure Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQLTools9_Hotfix_KB955706_sqlrun_tools.msp.log Error Number : 1712 Error Description : MSP Error: 1712 One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible. I've uninstalled all Visual Studio and tried to make this as clean as possible, and have read a lot of the blog posts, but am really at my wits end about this. I am not a DBA, but I use SQL Server all the time when coding and testing apps. Does anyone have any ideas as to where I can get this sorted out? I've been ati this for a long time and have never encountered an installation as bad as this one. Thanks Mike Thomas

  Read the article

• Why can't I see installed AIR applications in /Applications on Mac OS Lion?

  - by Damir Zekic

  Yesterday I did a clean install of Mac OS Lion, and installed bunch of apps, including HipChat Desktop Application (an Adobe AIR app). I used it for some time and eventually closed it. Today I wanted to start it again, but couldn't find it in Launchpad. I looked in /Applications folder, but I couldn't find it there either (I still don't have ~/Applications). I went back to HipChat website (from where I installed) and a Flash plugin allowed me to run the app immediately. It shows up in my Dock and if I "keep it" there, I can launch it again (it still doesn't appear in my /Applications dir). However, it asks me for confirmation about launching an app that has been downloaded from the Internet (every time I start it, it's annoying). I also see the app in Adobe AIR uninstaller. I then went to my old Snow Leopard installation and found HipChat in my /Applications folder there. Copied it to the Lion disk and it works. Now I have two HipChat entries in Adobe AIR uninstaller. I guess I solved the issue at hand, but I still don't understand where the original app is located and how I can access it and move it to Applications. I couldn't find it anywhere with both Finder search nor find command in terminal (I used $find / -name "HipChat*" -print). So, how does Adobe AIR store the installed applications (on OSX Lion) and is there any way to get them to show up in Launchpad?

  Read the article

• System32 files can be deleted in Windows 2008 but not in Windows 2003 [closed]

  - by Harvey Kwok

  I have been using Windows 2003 for a long time. There is a wonderful feature. I don't know the name of it but the feature is like this. You can rename or delete some important files inside C:\windows\system32. e.g. kerberos.dll. After a while, the deleted files will be automatically recovered. I think this is because those files are criticl enough that Windows cannot survive without them. However, in Windows 2008, this feature is gone. Instead, all the files in System32 are owned by TrustedInstaller. However, as a administrator, I can still take the ownserhip of the files and then delete them. Windwos 2008 won't recover the deleted files and hence the system is screwed next time it's reboot. So, I wonder why Windows 2008 dropping that wonderful feature. Was that auto-recovery feature also suffer from some issues? Does Windows 2008 have some other features that can prevent this type of disaster from happening?

  Read the article

• W2K INACCESSIBLE_BOOT_DEVICE, with System Commander

  - by Gary Kephart

  I have a system that was originally had Win NT. I added System Commander (SC7) and then added W2K. The relevant partitions are: 0 - Primary - MultiFAT (Has Win NT, mapped to C:) 1 - Extended - with many logical partitions: 1.1 NTFS which has W2K and is mapped to D: 1.2 other logical partitions which are irrelevant to this D: was getting full. It needed room for virus definitions and Windows upgrades. In the past, I had simple used SC7 to resize D: without problems. So I did it again this time. However, upon finishing, I got the message "Unable to create partition". It also marked the partition as unformatted. I checked that the files on the disk were still there using SC7's Partition Explorer, and they were there. I continued and the system managed to boot up fine anyways. Then I rebooted the system again. This time, I got a message saying "INACCESSIBLE_BOOT_DEVICE". I went back in to SC7 and to Partition Commander, and it was still saying that the partition was unformatted but the Partition Explorer still showed the files on the system. I finally decided to resize the partition again, figuring that this would force a rewrite of the partition information. That seemed to work, until I had to reboot again. Now I can't see the files using Partition Explorer, and the Resize button is now disabled. What now?

  Read the article

• How harmful is a hard disk spin cycle?

  - by Gilles

  It is conventional wisdom¹ that each time you spin a hard disk down and back up, you shave some time off its life expectancy. The topic has been discussed before: Is turning off hard disks harmful? What's the effect of standby (spindown) mode on modern hard drives? Common explanations for why spindowns and spinups are harmful are that they induce more stress on the mechanical parts than ordinary running, and that they cause heat variations that are harmful to the device mechanics. Is there any data showing quantitatively how bad a spin cycle is? That is, how much life expectancy does a spin cycle cost? Or, more practically, if I know that I'm not going to need a disk for X seconds, how large should X be to warrant spinning down? ¹ But conventional wisdom has been wrong before; for example, it is commonly held that hard disks should be kept as cool as possible, but the one published study on the topic shows that cooler drives actually fail more. This study is no help here since all the disks surveyed were powered on 24/7.

  Read the article

• Windows Bluescreen - atikmpag.sys

  - by Mochan

  Information Name: atikmpag.sys bluescreen (BSOD or BlueScreen of Death) Error code: 0x00000116 Appears when: Playing games, watching videos Can be reproduced: Yes Cause: Graphics Card is the main assumption System Specifications Before we begin - I will inform you of my specifications. OS: Windows 7 x64 Home Edition Model: Dell Inspiron 15R Special Edition (aka Inspiron 7520) (Add 2GB of RAM to the model linked) Hard Drive: 1TB CPU: Intel Quad-Core i7 Sandy Bridge (I think) Processor at 2.10GHz (I think it can be clocked to 3GHz?) RAM: 6GB (I think 1 x 4GB and 1 x 2GB) Display: 15.6" HD (1366x768) Graphics: AMD Radeon HD 7500M 2GB Details So now that you know some basics about my computer, I'll get to the problem. Being an Ubuntu user I hardly use Windows, but occasionally I do. Like to run Skyrim and other games incompatible with Linux and WINE. The new Sims 3 Seasons patch is also now not supported. When playing these two games and other ones, theoretically. I have also heard others saying that while watching HD movies and video series it also happens. While watching the bluescreen as it happens, I see it is the 'atikmpag.sys' error. I have not installed much and nothing significant. I think I have downloaded Skyrim, Firefox and The Sims 3. I haven't done much more... since Ubuntu is definitely the best in comparison! (No hate, just a joke :P). I can reproduce it easily (just by running a game for less than a minute). It is always there each time, but it's never at a specific time or anything. So far I have found that it may be caused by lack of power to the graphics card, or it may be damaged or fried. Since I've had the computer for a mere 4 months (and have had other problems with it also). I have contacted Dell but they are useless beyond belief. Anyone with any information, solutions or details are encouraged to share your knowledge, as it would be immensely appreciated.

  Read the article

• MySQL Master-Master w/ multiple read slave cost effective setup in AWS

  - by Ross

  I've been evaluating Amazon Web Services RDS for MySQL and costing out potential scenarios involving a simple multi-AZ deployment read/write setup vs. a multi-AZ deployment mysql master (hot-standby) with additional read-only slaves. the issue I'm trying to cost-optimize includes their reserved instance vs on-demand instances. Situation 1: purchase reserved multi-az setup for Extra-large-hi-mem(17GB RAM) instance for $5200/yr and have my application query the master all the time. the problem is, if I don't need all the resources of the (17GB RAM) all the time and therefore, especially not a hot-standby, what alternatives for savings can a better topology create, like potentially situation 2 below: Situation 2: purchase reserved multi-az setup using smaller master instances than above for the master-master hot-standby to receive the writes only. Then create and load balance several read-only slaves off the master and add/remove and/or scale up/down the read slaves based on demand. This might only cost $1000 + the on-demand usage of the read slaves. My thinking is, if I have a variable read-intensive application load, with low write load, the single level topology in situation 1 means I'm paying for a lot of resources at the write level of topology when I don't need them there. My hope is that situation 2 can yield cost savings from smaller reserved instances on the master-master resource level allowing me to scale up and down and/or out on the read-level according to demand as needed. Does anyone see a downside to doing this or know of some reason this isn't possible with RDS? Any other thoughts or advice always welcome of course. Thanks in advance, R

  Read the article

• Failed to connect from slave to master with error "error connecting to master (1045)"

  - by Victor Lin

  I try to setup replication from slave to the master. CHANGE MASTER TO MASTER_HOST = 'master', MASTER_PORT = 3306, MASTER_USER = 'repl', MASTER_PASSWORD = 'xxx'; And I did grant privileges to the user on master. I can connect with mysql command from slave machine to the master mysql -h master -u repl -p mysql> show grants; GRANT RELOAD, SUPER, REPLICATION SLAVE, CREATE USER ON *.* TO 'repl'@'xxx' IDENTIFIED BY PASSWORD 'xxx' mysql> select 1; +---+ | 1 | +---+ | 1 | +---+ 1 row in set (0.04 sec) As you can see, privileges are correct, connection works fine, but however, the connection for replication to master always failed. mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Connecting to master Master_Host: master Master_User: repl Master_Port: 3306 Connect_Retry: 60 Master_Log_File: Read_Master_Log_Pos: 4 Relay_Log_File: slave-replay-bin.000002 Relay_Log_Pos: 4 Relay_Master_Log_File: Slave_IO_Running: Connecting Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 0 Relay_Log_Space: 107 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 1045 Last_IO_Error: error connecting to master 'repl@master:3306' - retry-time: 60 retries: 86400 Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 0 1 row in set (0.00 sec) Is this caused by different version of MySQL server? The version of master is 5.0.77, and the slave is 5.5.13. But all articles I could find tell me that it's okay to replicate from a newer slave to old master. How to solve this problem? -- Update -- I even try to upgrade the old MySQL, but still, the problem is not solved. mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Connecting to master Master_Host: master Master_User: repl Master_Port: 3306 Connect_Retry: 60 Master_Log_File: master-bin.000007 Read_Master_Log_Pos: 107 Relay_Log_File: slave-replay-bin.000001 Relay_Log_Pos: 4 Relay_Master_Log_File: master-bin.000007 Slave_IO_Running: Connecting Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 107 Relay_Log_Space: 107 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 1045 Last_IO_Error: error connecting to master 'repl@master' - retry-time: 60 retries: 86400 Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 0 1 row in set (0.00 sec)

  Read the article

• ping/ssh networking problem with server from 1 particular windows xp laptop

  - by user47650

  I am experiencing an odd problem with one specific server at my data centre connecting from my laptop. Basically the server is accessible from other machines in my house, but not from 1 particular laptop which is running windows XP. I have setup tcpdump on the server and wireshark on the laptop, and I can see ping echo request and reply packets that actually make it back to the wireshark on the laptop, but nothing shows in the ping console output like so; $ ping xxx.55.32.255 Pinging xxx.55.32.255 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for xxx.55.32.255: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), But I can see from the wireshark on my local laptop that the ping reply gets back... No. Time Source Destination Protocol Info 46 3.964474 192.168.1.64 xxx.55.32.255 ICMP Echo (ping) request Frame 46 (74 bytes on wire, 74 bytes captured) Ethernet II, Src: Intel_31:d3:01 (00:19:d2:42:c3:01), Dst: ThomsonT_01:b8:2c (00:14:7f:02:b9:3c) Internet Protocol, Src: 192.168.1.64 (192.168.1.64), Dst: xxx.55.32.255 (xxx.55.32.255) Internet Control Message Protocol No. Time Source Destination Protocol Info 48 4.119060 xxx.55.32.255 192.168.1.64 ICMP Echo (ping) reply Frame 48 (74 bytes on wire, 74 bytes captured) Ethernet II, Src: ThomsonT_01:b8:2c (00:14:7f:01:b8:2c), Dst: Intel_21:c3:01 (10:20:d2:31:c3:01) Internet Protocol, Src: xxx.55.32.255 (xxx.55.32.255), Dst: 192.168.1.64 (192.168.1.64) Internet Control Message Protocol obviously I have disabled the windows firewall and there is nothing in the windows event log. There is nothing else obviously strange about the server as it is the same build as other servers that I can connect to fine.

  Read the article

• Missing Data on VMWare Virtual Disk

  - by Lachlan McDonald

  Evening all, I've got a considerable problem I'm hoping to get some resolution on. I had two VMWare 6.5 virtual machines, one running Ubuntu 9.10 and the other Ubuntu 10.04. I used 9.10 as a testing server, so I could install a LAMP environment to prepare some code. Over the months I took a number of snapshots of this VM just in case something went wrong, and did a full copy of the entire VM a month ago. I created the 10.04 VM when Lucid Lynx launched so I could continue development on a fresh install. To get the files over, I simply added the 9.10 virtual disk into the 10.04 VM, grabbed some of the files I needed, and dismounted it. Unknown to me at the time, the changes to the 9.04 virtual disk meant that I could no longer boot it with the 9.10 VM. I'd always get the "The parent virtual disk has been modified since the child was created." error. I decided this was a good time to backup all the critical files, but now whenever I open the 9.04 disk to get the data it isn't in the same state as it was earlier. My question is; is it possible when I'm mounting the virtual disk that I'm not seeing the most recent snapshot, or in my blundering, have I lost the virtual disk. Cheers

  Read the article

• is it good to have or difference between ADSL Modem+WiFi Router and Separate ADSL Modem & Wi-Fi Router?

  - by vikas devde

  I have ADSL2 Modem which I got from my service provider, now I want to setup wireless(Wi-Fi) in my home. I went to shop, where I came to know that there are routers which come up with modem also but they are priced lil higher than the only wi-fi routers. Now it is obvious that I should go for only wi-fi one, as I already have modem. My question is, is there any difference between ADSL+router and only router? I think if I use ADSL+router, the speed will increase lilbit, as modem does modulate and demodulate signals, and router also generates wireless signal, that is time to take conversions is doubled, and if I use ADSL+modem, it will directly convert the signals to wireless, and time will be saved, so the overall speed will increase lilbit. This is what my concept is(Which might be wrong). What do you guys would suggest me? should I take my current modem away and buy an ADSL+router or I should keep my modem and buy only wi-fi one. Please tell me the difference and suggest me which one I should go with, and also suggest me which company router I should go for.

  Read the article

• I am looking for a tool to measure or detect "unresponsiveness" of a desktop PC

  - by Tom H

  I have a client that provides some server systems to a hospital, and a support ticket was raised that the desktop application was hanging waiting for the server. We did some extensive testing and its pretty clear that the server is responsive, and the network is fine, and that the problem is on the client end. (no requests are received during the hang etc...) We take a look at the desktop machines and they should be fine, so we raise tickets with the software vendor who says that it must be the hardware, the hardware company says that it is the software, etc etc Anyway, so talking to the nurses, they say that these machines often "hang" for 30 seconds at a time, and sometimes during important moments where they need to get data for a patient who is unwell, such as charts and status. So I want to stick a client on these machines that would be able to detect arbitrary "unresponsiveness" of the keyboard/mouse and log that for analysis later. Obviously I am wary to suggest some application that takes resources and makes the problem even worse, so I would interested to see any tools that would detect these (is it correct to say that the keyboard interrupts are being discarded?) scenarios by looking for the OS discarding the interrupts, or whatever is appropriate here. so go on then serverfault, here is your chance to save a life.... ;-) Edit: I am starting to think that some of the tools associated with real time systems might be appropriate, at least as a diagnostic.

  Read the article

• How harmful is a hard disk spin cycle?

  - by Gilles

  It is conventional wisdom¹ that each time you spin a hard disk down and back up, you shave some time off its life expectancy. The topic has been discussed before: Is turning off hard disks harmful? What's the effect of standby (spindown) mode on modern hard drives? Common explanations for why spindowns and spinups are harmful are that they induce more stress on the mechanical parts than ordinary running, and that they cause heat variations that are harmful to the device mechanics. Is there any data showing quantitatively how bad a spin cycle is? That is, how much life expectancy does a spin cycle cost? Or, more practically, if I know that I'm not going to need a disk for X seconds, how large should X be to warrant spinning down? ¹ But conventional wisdom has been wrong before; for example, it is commonly held that hard disks should be kept as cool as possible, but the one published study on the topic shows that cooler drives actually fail more. This study is no help here since all the disks surveyed were powered on 24/7.

  Read the article

• Windows 7 machine, can't connect remotely until after ping

  - by rjohnston

  I have a Windows 7 (Home Premium) machine that doubles as a media centre and subversion server. There's a couple of problems with this setup, when connecting to the server from an XP (SP3) machine: Firstly, the machine won't respond to it's machine name until after it's IP address has been pinged. Here's an example: Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. C:\Documents and Settings\Rob>ping damascus Ping request could not find host damascus. Please check the name and try again. C:\Documents and Settings\Rob>ping 192.168.1.17 Pinging 192.168.1.17 with 32 bytes of data: Reply from 192.168.1.17: bytes=32 time=2ms TTL=128 ... Ping statistics for 192.168.1.17: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 2ms, Average = 1ms C:\Documents and Settings\Rob>ping damascus Pinging damascus [192.168.1.17] with 32 bytes of data: Reply from 192.168.1.17: bytes=32 time<1ms TTL=128 .... Ping statistics for 192.168.1.17: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 1ms, Average = 0ms C:\Documents and Settings\Rob> Likewise, subversion commands with either the machine name or IP address will fail until the machine's IP address is pinged. Occasionally, the machine won't respond to pings on it's IP address, it'll just come back with "Request timed out". The svn server is VisualSVN, if that helps... Any ideas?

  Read the article

• Setup a new domain controller over a temporary VPN, but now Windows delays startup?

  - by Kris Anderson

  I'm migrating servers from colo locations to Amazon's VPC EC2 instances. If anyone hasn't worked with Amazon VPC before, VPN is a pain in the arse! Anyways, I setup a new server that acts as the domain controller for our Amazon VPC. In order to migrate all the user accounts from our existing domain controllers I manually connected to our colo VPN using my user account on the new Amazon EC2 machine. I was able to join the domain and the new Amazon server became another domain controller on our network. So far so good. The problem I'm having is that when booting the EC2 domain controller (which is no longer connected to the VPN so it can't communicate with the existing controllers), it takes a good 6-8 minuted before I can remote into the server (instead of the 1-2 minutes it should take). Also, during this time most of the services we also run (like IIS) also give 404 errors until the 6-8 minutes have passed. It's almost like the domain controller is attempting to reach the other domain controllers first and after 6-8 minutes it falls back to the one located on the local machine? I don't think that's what's happening though, because Server 2008 R2 doesn't have primary and backup domain controllers. They're all equal as far as Windows is concerned. For my network adapter I have only one DNS listed, 127.0.0.1, so it should be looking up the local domain controller and not the other domain controllers it connected to over VPN when VPN was enabled. In the server logs I'm seeing these warnings pop up during a reboot: The winlogon notification subscriber is taking long time to handle the notification event (CreateSession). The winlogon notification subscriber took 409 second(s) to handle the notification event (CreateSession). Any ideas on what's happening here? I would try removing the existing domain controllers from the new Amazon EC2 machine, but I still need to connect over VPN a few times to migrate some data between the servers, and I don't want that change being reflected back to the other domain controllers in our colo locations.

  Read the article

• Configuration for Router Behind Uverse 2Wire

  - by Nori

  I have a 2Wire Uverse router(RG). I'm not particularly fond of it and want to use it as a modem only. I have a Linksys router with Tomato firmware on it and want that to be configured as the router. Most of the "guides" I've seen in my searches has been to enable DMZ Plus mode, but I don't see a way to make that work while my router has a static IP address. I played with it for quite some time yesterday and didn't see a way to get it to work. Then I ran across a setting in broadband for configuring another network. I played with that for a little bit but ran out of time and couldn't get it to work. So my question is for anyone out there who has Uverse and successfully setup a Tomato based firmware router behind the RG. How did you get it configured? I'm sure if I continued playing with it I could get it to work, but if someone out there already has it working then that would make my life easier. Thoughts? Thanks.

  Read the article

• Is there any limit to AIX 5.3 pipe size ?

  - by snowflake

  Hello, I'm in trouble while performing cat/tail/head operation on large files on Aix 5.3. When asking for a cat of several 1Go file redirected to another one: cat file1 file2 file3 > outputfile The outputfile is limited to 2Go (cat: output error and result file is 2147483647 bytes) Filesystem is jfs2. I successfully uploaded through ftp 10Go files on the filesystem without problem. I found nothing relevant in etc/security/limits: default: fsize = -1 core = 2097151 cpu = -1 data = 262144 rss = 65536 stack = 65536 nofiles = 20000 ulimit -a core file size (blocks) unlimited data seg size (kbytes) 245759 file size (blocks) unlimited max memory size (kbytes) unlimited open files 2000 pipe size (512 bytes) 64 stack size (kbytes) 32768 cpu time (seconds) unlimited max user processes 2048 virtual memory (kbytes) 278527 The problem does not occur on another AIX 5.3 server, I'm just looking for a different configuration that might be the source of the problem. /etc/security/limits on the server without the problem: default: fsize = -1 core = 2097151 cpu = -1 data = 262144 rss = 65536 stack = 65536 nofiles = 20000 ulimit -a on the server without the problem: core file size (blocks, -c) 1048575 data seg size (kbytes, -d) 131072 file size (blocks, -f) unlimited max memory size (kbytes, -m) 32768 open files (-n) 20000 pipe size (512 bytes, -p) 64 stack size (kbytes, -s) 32768 cpu time (seconds, -t) unlimited max user processes (-u) 262144 virtual memory (kbytes, -v) unlimited

  Read the article

• Active directory Kerberos OSX problems

  - by Temotodochi

  I'll try to keep this short, but informative. I'm currently unable to bind OSX lion (10.7.4) machines to our AD. OSX kerberos (heimdal) is unable to locate the KDC service. However i can bind linux & windows machines to the AD without any problems in the same network AD controls the domain DNS and all the relevant _kerberos._tcp.x.domain.com and _kpasswd SRV DNS records are there and resolve fine when tried from OSX machines. Defined ports are open for service and manually accessible from OSX. When i try kinit in the OSX, i can get the first auth through (wrong passwords fail instantly), but when supplied with correct password, kinit fails after some waiting with "unable to reach KDC". All machines run NTP and have correct time. During testing, network is not firewalled between the machines Linux and windows machines have no problems whatsoever I have tried with and without /etc/krb5.conf - OSX by default does not need it in the krb5.conf i used a working config from one of our linux machines. dsconfigad fails with simple "connection failed to the directory server" I'm a bit baffled with this. OSX is like the KDC is nowhere to be found and at the same time my test machines with windows 7 and some linux (centos 6 & debian 6) machines have no problems whatsoever. Same network, same configurations. I'm missing some vital piece of configuration somewhere, and i can't find out what it is.

  Read the article

• Accounting setup in freeradius with mikrotik and the "always" module

  - by Matt

  I have a freeradius setup that is being used to provide authentication for users on a wireless network. The access points are all Mikrotik hardware and the users are connected 24/7. We've been using Daloradius with mysql and freeradius 2. The boss wants to use the accounting information and while this is all set up and appears to be working, I've found that not all the accounting information is present. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly. So he started poking around at this link: http://wiki.mikrotik.com/wiki/RouterOs_MySql_Freeradius#Configuring_RouterOs_for_Radius_.26_PPP.2A_AAA And was looking specifically at the following section. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly always fail { rcode = fail } always reject { rcode = reject } always ok { rcode = ok simulcount = 0 mpp = no } However, that link references freeradius 1 and I can't find this in the radius.conf file for freeradius 2. What does it do and could it be a reason I'm missing data? EDIT: I have found one issue. We have a backup freeradius server that is also receiving the accounting packets. Although they are replicating, it's only a master/slave configuration. If the slave receives accounting packets it won't replicate them back to the master. Although I suspect this might solve it, the boss is not convinced due to the always module. Is there anything special I need to configure in the mikrotik AP's or freeradius 2 for clients connected 24/7.

  Read the article

• [Ubuntu 10.04] mdadm - Can't get RAID5 Array To Start

  - by Matthew Hodgkins

  Hello, after a power failure my RAID array refuses to start. When I boot I have to sudo mdadm --assemble --force /dev/md0 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 /dev/sdf1 /dev/sdg1 to get mdadm to notice the array. Here are the details (after I force assemble). sudo mdadm --misc --detail /dev/md0: /dev/md0: Version : 00.90 Creation Time : Sun Apr 25 01:39:25 2010 Raid Level : raid5 Used Dev Size : 1465135872 (1397.26 GiB 1500.30 GB) Raid Devices : 6 Total Devices : 6 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Jun 17 23:02:38 2010 State : active, Not Started Active Devices : 6 Working Devices : 6 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 128K UUID : 44a8f730:b9bea6ea:3a28392c:12b22235 (local to host hodge-fs) Events : 0.1249691 Number Major Minor RaidDevice State 0 8 65 0 active sync /dev/sde1 1 8 81 1 active sync /dev/sdf1 2 8 97 2 active sync /dev/sdg1 3 8 49 3 active sync /dev/sdd1 4 8 33 4 active sync /dev/sdc1 5 8 17 5 active sync /dev/sdb1 mdadm.conf: # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions /dev/sdb1 /dev/sdb1 # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # definitions of existing MD arrays ARRAY /dev/md0 level=raid5 num-devices=6 UUID=44a8f730:b9bea6ea:3a28392c:12b22235 Any help would be appreciated.

  Read the article

• High latency issue for web service call from amazon aws ec2 to local server

  - by SibzTer

  We have a legacy web application that is running in our data center on premises located in Houston. We have a developed a new .net 4 based web application in order to provide new features to customers. The new web application is hosted in amazon aws ec2 environment (N. Virginia region us-east-1b zone). In order to get seamlessly integrate with the legacy application the new web application makes web service calls to retrieve data. We are seeing an unusually high latency time in the order of 5+ seconds for these web service calls. The exact same web service call returns in less than a second on our local PCs (which makes sense given physical proximity to the actual server). The weird part is that we have developers in California who also have the same milliseconds response time. We are testing the web service response using third party tools such as SoapUI, Google Chrome extensions such as Advanced REST Client, Postman REST Client, etc. As if this wasnt weird enough, we have noticed the same low latency from certain other ec2 instances while testing which are in the same region and availability zone as well. If we experienced the high latency consistently from all the ec2 instances I could understand. But there is something else going on. Comparing the various stats and results between the low latency and high latency ec2 servers do not show any significant differences: ping (constant 40ms), tracert, winmtr, etc. We have instances that are in the VPC as well. So I tried both the public and private IP address of the web service host server and that didnt make a difference either for the above results. We need to resolve this latency issue as this is causing the resulting web pages to load very slowly (almost 15+ seconds which is simply unacceptable). The ec2 instances have Windows Server Datacenter 64 bit. Let me know if there is any other infor I can provide to help diagnose this.

  Read the article

• FreeBSD slow transfers - RFC 1323 scaling issue?

  - by Trey

  I think I may be having an issue with window scaling (RFC 1323) and am hoping that someone can enlighten me on what's going on. Server: FreeBSD 9, apache22, serving a static 100MB zip file. 192.168.18.30 Client: Mac OS X 10.6, Firefox 192.168.17.47 Network: Only a switch between them - the subnet is 192.168.16/22 (In this test, I also have dummynet filtering simulating an 80ms ping time on all IP traffic. I've seen nearly identical traces with a "real" setup, with real internet traffic/latency also) Questions: Does this look normal? Is packet #2 specifying a window size of 65535 and a scale of 512? Is packet #5 then shrinking the window size so it can use the 512 scale and still keep the overall calculated window size near 64K? Why is the window scale so high? Here are the first 6 packets from wireshark. For packets 5 and 6 I've included the details showing the window size and scaling factor being used for the data transfer. Code: No. Time Source Destination Protocol Length Info 108 6.699922 192.168.17.47 192.168.18.30 TCP 78 49190 http [SYN] Seq=0 Win=65535 Len=0 MSS=1460 WS=8 TSval=945617489 TSecr=0 SACK_PERM=1 115 6.781971 192.168.18.30 192.168.17.47 TCP 74 http 49190 [SYN, ACK] Seq=0 Ack=1 Win=65535 Len=0 MSS=1460 WS=512 SACK_PERM=1 TSval=2617517338 TSecr=945617489 116 6.782218 192.168.17.47 192.168.18.30 TCP 66 49190 http [ACK] Seq=1 Ack=1 Win=524280 Len=0 TSval=945617490 TSecr=2617517338 117 6.782220 192.168.17.47 192.168.18.30 HTTP 490 GET /utils/speedtest/large.file.zip HTTP/1.1 118 6.867070 192.168.18.30 192.168.17.47 TCP 375 [TCP segment of a reassembled PDU] Details: Transmission Control Protocol, Src Port: http (80), Dst Port: 49190 (49190), Seq: 1, Ack: 425, Len: 309 Source port: http (80) Destination port: 49190 (49190) [Stream index: 4] Sequence number: 1 (relative sequence number) [Next sequence number: 310 (relative sequence number)] Acknowledgement number: 425 (relative ack number) Header length: 32 bytes Flags: 0x018 (PSH, ACK) Window size value: 130 [Calculated window size: 66560] [Window size scaling factor: 512] Checksum: 0xd182 [validation disabled] Options: (12 bytes) No-Operation (NOP) No-Operation (NOP) Timestamps: TSval 2617517423, TSecr 945617490 [SEQ/ACK analysis] TCP segment data (309 bytes) Note: originally posted http://forums.freebsd.org/showthread.php?t=32552

  Read the article

• Tomcat deployment overwrites context.xml

  - by Kristoffer

  Hi, I'm pretty new to Tomcat in general, so please point out if got anything wrong. My question is regarding updates to already deployed apps, using the Tomcat manager. But first thing first. I'm using the META-INF/Context.xml for storing connection info for the database connections, so this is unique to every server the application is deployed to. I'm not sure if this is optimal but it's the only way I know. So, when updating the application, it's important that this file doesn't get modified, because I don't want to have to go in and remake all changes every time I update my app. For updating, I'm using the Tomcat Manager, and I've tried different approaches but everything seems to build on the process of undeploy, then deploy the new version. This way, the Context.xml gets removed/replaced by an empty Context.xml file. So my question is basically, how do I update a running webapp, and at the same time having the Context.xml left untouched? Btw, I'm running Tomcat 6.0.24.

  Read the article

< Previous Page | 696 697 698 699 700 701 702 703 704 705 706 707  | Next Page >