Search Results

Search found 22065 results on 883 pages for 'performance testing'.

Page 705/883 | < Previous Page | 701 702 703 704 705 706 707 708 709 710 711 712  | Next Page >

• Using all Ten IO slots on a 7420

  - by user12620172

  So I had the opportunity recently to actually use up all ten slots in a clustered 7420 system. This actually uses 20 slots, or 22 if you count the clusteron card. I thought it was interesting enough to share here. This is at one of my clients here in southern California. You can see the picture below. We have four SAS HBAs instead of the usual two. This is becuase we wanted to split up the back-end taffic for different workloads. We have a set of disk trays coming from two SAS cards for nothing but Exadata backups. Then, we have a different set of disk trays coming off of the other two SAS cards for non-Exadata workloads, such as regular user file storage. We have 2 Infiniband cards which allow us to do a full mesh directly into the back of the nearby, production Exadata, specifically for fast backups and restores over IB. You can see a 3rd IB card here, which is going to be connected to a non-production Exadata for slower backups and restores from it.The 10Gig card is for client connectivity, allowing other, non-Exadata Oracle databases to make use of the many snapshots and clones that can now be created using the RMAN copies from the original production database coming off the Exadata. This allows for a good number of test and development Oracle databases to use these clones without effecting performance of the Exadata at all.We also have a couple FC HBAs, both for NDMP backups to an Oracle/StorageTek tape library and also for FC clients to come in and use some storage on the 7420.  Now, if you are adding more cards to your 7420, be aware of which cards you can place in which slots. See the bottom graphic just below the photo.  Note that the slots are numbered 0-4 for the first 5 cards, then the "C" slots which is the dedicated Cluster card (called the Clustron), and then another 5 slots numbered 5-9. Some rules for the slots: Slots 1 & 8 are automatically populated with the two default SAS cards. The only other slots you can add SAS cards to are 2 & 7. Slots 0 and 9 can only hold FC cards. Nothing else. So if you have four SAS cards, you are now down to only four more slots for your 10Gig and IB cards. Be sure not to waste one of these slots on a FC card, which can go into 0 or 9, instead.  If at all possible, slots should be populated in this order: 9, 0, 7, 2, 6, 3, 5, 4

  Read the article

• Advice on how to build html5 basic tile game (multi player, cross device)

  - by Eric

  I just read http://buildnewgames.com/real-time-multiplayer/ which explains the fundamentals and bets practices to build a massive real time multiplayer html5 game. My question is however given the “simplicity” of the game I need to build (simple kind of scratch game where you find or not something behind a tile), do I really need complex tools (canvas or node.js for example) ? The game The gamestakes place with a picture of our office as a background (tilemap). For HR purpose, we wish to create the following game fore employees: each day they can come to the website and click on a certain number of tiles (3 max per day) and find behind it motivation advice and interesting facts about the company. The constraints and rules the screen is divided into isometric 2D square tiles. There are basically an image (photograph of our office) number of tiles on the screen game: about 10,000 to much more (with scroll , see below) the players can scroll in 4 directions there are only 2 types of tiles: already open and closed player can open tiles that have not been yet open by other players there is no path for players : any player can click on any tile on the screen at any moment (if it’s not already done by another player) 2 players can’t be on the same tile at the same moment (or if they can, I’ll have to manage to see which one clicked on it first) only one type of player (all with similar roles), no weapon, no internal score… very simple game. no complex physics (collision only occurs if 2 players are on the same tile) The target I need to achieve: cross device, cross browsers high performance reaction (subsecond reactions) average nb of players per hour: up to 10K players per hour (quite high indeed but it’s because we aim at proving our case for the game to our business unit) So what I would like to know: 2D Tiled map: Do I need tiledmapeditor or can I enable me split the screen like here ? should I use canvas or plain html/css could be sufficient for my need? do I need a game engine/framework such as melon.js or crafty./js ? (even if the game play is extremely basic, I do need mouse and touché device support, mouse emulations on touch devices…) or ca I easily/quickly do it without? for my constraints and targets, should I use CPU acceleration ? for my constraints and targets, should I use web workers ? for the database, for a massively real time game should I avoid to put the current locations of player in MySQL as i feel it might slow me down. What kind of DB should I implement ? Thanks for your help !

  Read the article

• SharePoint 2010 HierarchicalConfig Caching Problem

  - by Damon

  We've started using the Application Foundations for SharePoint 2010 in some of our projects at work, and I came across a nasty issue with the hierarchical configuration settings.  I have some settings that I am storing at the Farm level, and as I was testing my code it seemed like the settings were not being saved - at least that is what it appeared was the case at first.  However, I happened to reset IIS and the settings suddenly appeared.  Immediately, I figured that it must be a caching issue and dug into the code base.  I found that there was a 10 second caching mechanism in the SPFarmPropertyBag and the SPWebAppPropertyBag classes.  So I ran another test where I waited 10 seconds to make sure that enough time had passed to force the caching mechanism to reset the data.  After 10 minutes the cache had still not cleared.  After digging a bit further, I found a double lock check that looked a bit off in the GetSettingsStore() method of the SPFarmPropertyBag class: if (_settingStore == null || (DateTime.Now.Subtract(lastLoad).TotalSeconds) > cacheInterval)) { //Need to exist so don't deadlock. rrLock.EnterWriteLock(); try { //make sure first another thread didn't already load... if (_settingStore == null) { _settingStore = WebAppSettingStore.Load(this.webApplication); lastLoad = DateTime.Now; } } finally { rrLock.ExitWriteLock(); } } What ends up happening here is the outer check determines if the _settingStore is null or the cache has expired, but the inner check is just checking if the _settingStore is null (which is never the case after the first time it's been loaded).  Ergo, the cached settings are never reset.  The fix is really easy, just add the cache checking back into the inner if statement. //make sure first another thread didn't already load... if (_settingStore == null || (DateTime.Now.Subtract(lastLoad).TotalSeconds) > cacheInterval) { _settingStore = WebAppSettingStore.Load(this.webApplication); lastLoad = DateTime.Now; } And then it starts working just fine. as long as you wait at least 10 seconds for the cache to clear.

  Read the article

• Nails vs Screws (C# List vs Dictionary)

  - by MarkPearl

  General This may sound like a typical noob statement, but I’m finding out in a very real way that just because you have a solution to a problem, doesn’t necessarily mean it is the best solution. This was reiterated to me when a friend of mine suggested I look at using Dictionaries instead of Lists for a particular problem – he was right, I have always just assumed that because lists solved my problem I did not need to look elsewhere. So my new manifesto to counter this ageless problem is as follows… Look for a solution that will logically work Once you have a solution look for possible alternatives Decide why your current solution is the best approach compared to the alternatives If it is.. use it till something better comes along, if it isnt…. change What’s the difference between Lists & Dictionaries Both lists and dictionaries are used to store collections of data. Assume we had the following declarations… var dic = new Dictionary<string, long>(); var lst = new List<long>(); long data;   With a list, you simply add the item to the list and it will add the item to the end of the list. lst.Add(data); With a dictionary, you need to specify some sort of key and the data you want to add so that it can be uniquely identified. dic.Add(uniquekey, data);   Because with a dictionary you now have unique identifier, in the background they provide all sort’s of optimized algorithms to find your associated data. What this means is that if you are wanting to access your data it is a lot faster than a List. So when is it appropriate to use either class? For me, if I can guarantee that each item in my collection will have a unique identifier, then I will use Dictionaries instead of Lists as there is a considerable performance benefit when accessing each data item. If I cannot make this sort of guarantee, then by default I will use a list. I know this is all really basic, and I hope I haven’t missed some fundamental principle… If anyone would like to add their 2 cents, please feel free to do so…

  Read the article

• What ever happened to the Defense Software Reuse System (DSRS)?

  - by emddudley

  I've been reading some papers from the early 90s about a US Department of Defense software reuse initiative called the Defense Software Reuse System (DSRS). The most recent mention of it I could find was in a paper from 2000 - A Survey of Software Reuse Repositories Defense Software Repository System (DSRS) The DSRS is an automated repository for storing and retrieving Reusable Software Assets (RSAs) [14]. The DSRS software now manages inventories of reusable assets at seven software reuse support centers (SRSCs). The DSRS serves as a central collection point for quality RSAs, and facilitates software reuse by offering developers the opportunity to match their requirements with existing software products. DSRS accounts are available for Government employees and contractor personnel currently supporting Government projects... ...The DoD software community is trying to change its software engineering model from its current software cycle to a process-driven, domain-specific, architecture-based, repository-assisted way of constructing software [15]. In this changing environment, the DSRS has the highest potential to become the DoD standard reuse repository because it is the only existing deployed, operational repository with multiple interoperable locations across DoD. Seven DSRS locations support nearly 1,000 users and list nearly 9,000 reusable assets. The DISA DSRS alone lists 3,880 reusable assets and has 400 user accounts... The far-term strategy of the DSRS is to support a virtual repository. These interconnected repositories will provide the ability to locate and share reusable components across domains and among the services. An effective and evolving DSRS is a central requirement to the success of the DoD software reuse initiative. Evolving DoD repository requirements demand that DISA continue to have an operational DSRS site to support testing in an actual repository operation and to support DoD users. The classification process for the DSRS is a basic technology for providing customer support [16]. This process is the first step in making reusable assets available for implementing the functional and technical migration strategies. ... [14] DSRS - Defense Technology for Adaptable, Reliable Systems URL: http://ssed1.ims.disa.mil/srp/dsrspage.html [15] STARS - Software Technology for Adaptable, Reliable Systems URL: http://www.stars.ballston.paramax.com/index.html [16] D. E. Perry and S. S. Popovitch, “Inquire: Predicate-based use and reuse,'' in Proceedings of the 8th Knowledge-Based Software Engineering Conference, pp. 144-151, September 1993. ... Is DSRS dead, and were there any post-mortem reports on it? Are there other more-recent US government initiatives or reports on software reuse?

  Read the article

• What's Happening in Business Analytics at OpenWorld 2012?

  - by jmorourke

  Oracle OpenWorld 2012 is rapidly approaching on September 30th when we take over the city of San Francisco for five days.  The Business Analytics this year is our strongest ever with over 150 EPM, BI, Analytics and Data Warehousing sessions delivered by Oracle, our customers and partners.  We’ll also have Hands-On Labs, 20 demo pods dedicated to Business Analytics products, and over 30 partners exhibiting their solutions.  So what’s hot in the Business Analytics program at OpenWorld?  Here are some of the “can’t miss” sessions at this year’s conference: The EPM and BI general sessions, led by SVP of Product Development Balaji Yelamanchili will highlight what’s new provide a view into Oracle’s EPM, BI and Analytics strategies.  Both sessions are scheduled on Monday, October 1st. Thursday Keynote:  See More, Act Faster:  Oracle Business Analytics, led by Oracle President Mark Hurd, will provide a view into Oracle’s strategy for Business Analytics, especially engineered systems designed to provide extreme performance for the most rigorous analytic tasks. Superfast Business Intelligence with Oracle Exalytics.  Hear about various business intelligence scenarios in which Oracle Exalytics provides exemplary value—from operational reporting and prepackaged applications to analytics on unstructured data. Turn Insights into Real-Time Actions with Oracle Business Intelligence Mobile.  Learn how Oracle Business Intelligence Mobile enables organizations to deliver relevant information and turn insight into real-time action, no matter where employees are located. Empowering the Business User: Introduction to Oracle Endeca Information Discovery.  Find out how you can find fast answers to the new questions that confront your business every day, while avoiding the confusion and inconsistencies brought about by spreadsheets and desktop tools. Big Data:  The Big Story.  Learn how to harness big data, your existing data, and predictive analytics to make better decisions in an environment of rapid shifts in behavior and instant feedback.  Learn about the technologies that constitute a big data architecture, how to leverage and implement advanced analytics for real-time decisions, and the tools needed to know the unknown. Planning at the Speed of Business with Oracle Exalytics.  Learn how Oracle Hyperion Planning leverages the power of Oracle Exalytics to do planning faster, with more detail and more users than ever. For more details on these and other Business Analytics sessions at OpenWorld, download the Focus On Business Analytics program guide at:  http://www.oracle.com/openworld/focus-on/index.html We look forward to seeing you in San Francisco!

  Read the article

• C# Collision Math Help

  - by user36037

  I am making my own collision detection in MonoGame. I have a PolyLine class That has a property to return the normal of that PolyLine instance. I have a ConvexPolySprite class that has a List LineSegments. I hav a CircleSprite class that has a Center Property and a Radius Property. I am using a static class for the collision detection method. I am testing it on a single line segment. Vector2(200,0) = Vector2(300, 200) The problem is it detects the collision anywhere along the path of line out into space. I cannot figure out why. Thanks in advance; public class PolyLine { //--------------------------------------------------------------------------------------------------------------------------- // Class Properties /// <summary> /// Property for the upper left-hand corner of the owner of this instance /// </summary> public Vector2 ParentPosition { get; set; } /// <summary> /// Relative start point of the line segment /// </summary> public Vector2 RelativeStartPoint { get; set; } /// <summary> /// Relative end point of the line segment /// </summary> public Vector2 RelativeEndPoint { get; set; } /// <summary> /// Property that gets the absolute position of the starting point of the line segment /// </summary> public Vector2 AbsoluteStartPoint { get { return ParentPosition + RelativeStartPoint; } }//end of AbsoluteStartPoint /// <summary> /// Gets the absolute position of the end point of the line segment /// </summary> public Vector2 AbsoluteEndPoint { get { return ParentPosition + RelativeEndPoint; } }//end of AbsoluteEndPoint public Vector2 NormalizedLeftNormal { get { Vector2 P = AbsoluteEndPoint - AbsoluteStartPoint; P.Normalize(); float x = P.X; float y = P.Y; return new Vector2(-y, x); } }//end of NormalizedLeftNormal //--------------------------------------------------------------------------------------------------------------------------- // Class Constructors /// <summary> /// Sole ctor /// </summary> /// <param name="parentPosition"></param> /// <param name="relStart"></param> /// <param name="relEnd"></param> public PolyLine(Vector2 parentPosition, Vector2 relStart, Vector2 relEnd) { ParentPosition = parentPosition; RelativeEndPoint = relEnd; RelativeStartPoint = relStart; }//end of ctor }//end of PolyLine class public static bool Collided(CircleSprite circle, ConvexPolygonSprite poly) { var distance = Vector2.Dot(circle.Position - poly.LineSegments[0].AbsoluteEndPoint, poly.LineSegments[0].NormalizedLeftNormal) + circle.Radius; if (distance <= 0) { return false; } else { return true; } }//end of collided

  Read the article

• How do I prevent ISPs from killing downloads of files in mid-transfer?

  - by Gorchestopher H

  I run a small website with a few users, low traffic, mostly to share personal mp3 files with a small community. Depending on their ISP, my users can't always download or stream larger files. By larger I mean larger than 1MB. Essentially the host either stops sending, or the client stops receiving. One of the links along the connection chain simply ends its connection before the transfer completes Trace-route shows no connection issues. There are no connection issues with short transfers that don't take more than a few seconds. It's these 10 second transfers that just end up ending. Just doing a straight download with a direct link can yield this error if you have the wrong ISP. Strangely enough, this is most common with users with ISPs who are essentially independent providers that buy service via a fiber link. Unfortunately these providers aren't very knowledgeable, are unable to do any testing, and insist it's a problem with the host. I have gotten my host to transfer my site to different servers of their, to the same effect. Nearly identical sites (affiliate sites actually) experience no such issue. What can I be doing to further troubleshoot this matter? How can I prove that someone is dropping the ball, and identify who that party is? Can I do a 5Mb traceroute? EDIT Maybe I can clear up some misconceptions with my question: The files are not very large. They are simply over 2Mb. The users do not have "slow" connections, they are at least 5mbps. This "time out" happens very quickly, in the realm of 5 seconds, so I don't know if it's a timeout or not. The user often gets 1 or 2Mb in this chunk of time. I have tried streaming with a flash player. I have tried saving the target. Forcing the download. I have tried allowing the browser to stream the file. I have tried different browsers (FF, IE, Chrome). Users are able to download identical files when on different hosts.

  Read the article

• WebLogic Partner Community Newsletter September 2012

  - by JuergenKress

  Dear WebLogic partner community member Happy Birthday to our WebLogic partner Community! We launched the community a year ago, it is growing fast with almost 1,000 members and with a significant impact in our business. The WebLogic partner revenue grew significant last fiscal year. I would like to thank you for your contribution. It is indeed a great opportunity for your WebLogic service revenue, like consulting, implementation or training. There will be thousands of opportunities at our joint customer base, like iAs to WebLogic migration, J2EE platform consolidation or private clouds. We will continue to highlight these opportunities in our newsletter and offer you campaign kits. Please feel free to let us know if you are interested. I would also recommend you to give us your feedback in our WebLogic Partner Community Survey 2012! Your feedback is very important for us. We continue to offer free WebLogic 12c Bootcamps across Europe. Please make sure you register asap for your local training! In addition to this we plan to offer Exalogic 2.01 Bootcamp. If you are interested to attend it then please add your details to our wiki. Our ExaLogic kit is updated with ExaLogic 2.01 ppt & training & Installation check-list & tips & Web tier roadmap. In case you want to learn more about ExaLogic, please visit Qualogy virtual demo center. We have not only released the latest version of Tuxedo 12c but Andrejus also made a Performance Audit Tool - Runtime Diagnosis for ADF Applications which is available now. We uploaded the latest WebLogic 12c and Glassfish ppt presentation for your customer meetings to the WebLogic Community Workspace (WebLogic Community membership required). Are you ready and prepared for Oracle Open World 2012? Make sure you read our tips and enjoy the conference! WebLogic Server 11gR1 Interactive Quick Reference is a wonderful online overview. Make sure you do not miss it! If you want to try WebLogic why not in the Oracle Cloud - Java Cloud Service. Our Java Guru Adam Bien published a new book Real World Java EE Patterns. If you use Java on your machine, Please make sure that you update your Java SE. Jürgen Kress Oracle WebLogic Partner Adoption EMEA To read the newsletter please visit http://tinyurl.com/WebLogicnewsSeptember2012 (OPN Account required) To become a member of the WebLogic Partner Community please register at http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic Community newsletter,newsletter,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• WebLogic Partner Community Newsletter October 2012

  - by JuergenKress

  Dear WebLogic partner community member Oracle OpenWorld and the JavaOne is just over with lots of product updates and highlights. In this newsletter you will find the key information on many new product and launches. Make sure you download the presentation from our WebLogic Community Workspace (WebLogic Community membership required), to train yourself and for your next customer meeting. Thanks for all the tweets tweets #WebLogicCommunity, the pictures at our facebook page and the nice blog posts from Guido & Lucas & Jan. Java One was a super sucess - JavaOne 2012: Strategy and Technical Keynote - Java 2,5 years after the acquisition - IDC report - make the future Java! If you want to become a Java Expert, make sure you attend one of our WebLogic 12c Bootcamps or our fist ExaLogic Hackers Night - November 19th Nürnberg Germany. All developers can use WebLogic free of charge! For developers, there are lots of ADF news on Oracle ADF Essentials & ADF training material now on the iPad By Grant Ronald & GlassFish Extension for Oracle JDeveloper & Installing, Configuring, and Testing WebLogic Server 12c Developer Zip Distribution in NetBeans. If you want to become a certified WebLogic company, WebLogic Server 12c Specialization is now available for you. You just need to go to the Knowledge Zone section, select the “Specialization” tab and click on “Apply Now” Now available: WebLogic Server 12c Implementation Specialist Boot Camp LVT. Now in Production: Oracle WebLogic Server 12c Implementation Specialist certification (1Z0-599) In our specialization benefit series we highlight this month the opportunity to promote your WebLogic services by google ads. Torsten Winterberg, OFM ACE Director published Mobile Web Applications – A guide for professional development. Please feel free to let us know if you publish a book or article! Hope to see you at the Middleware Day at UK Oracle User Group Conference 2012 in Birmingham. Jürgen Kress Oracle WebLogic Partner Adoption EMEA To read the newsletter please visit http://tinyurl.com/WebLogicnewsOctober2012 (OPN Account required) To become a member of the WebLogic Partner Community please register at http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic Community newsletter,newsletter,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• A Simple Entity Tagger

  - by Elton Stoneman

  In the REST world, ETags are your gateway to performance boosts by letting clients cache responses. In the non-REST world, you may also want to add an ETag to an entity definition inside a traditional service contract – think of a scenario where a consumer persists its own representation of your entity, and wants to keep it in sync. Rather than load every entity by ID and check for changes, the consumer can send in a set of linked IDs and ETags, and you can return only the entities where the current ETag is different from the consumer’s version.  If your entity is a projection from various sources, you may not have a persistent ETag, so you need an efficient way to generate an ETag which is deterministic, so an entity with the same state always generates the same ETag. I have an implementation for a generic ETag generator on GitHub here: EntityTagger code sample. The essence is simple - we get the entity, serialize it and build a hash from the serialized value. Any changes to either the state or the structure of the entity will result in a different hash. To use it, just call SetETag, passing your populated object and a Func<> which acts as an accessor to the ETag property: EntityTagger.SetETag(user, x => x.ETag); The implementation is all in at 80 lines of code, which is all pretty straightforward: var eTagProperty = AsPropertyInfo(eTagPropertyAccessor); var originalETag = eTagProperty.GetValue(entity, null); try { ResetETag(entity, eTagPropertyAccessor); string json; var serializer = new DataContractJsonSerializer(entity.GetType()); using (var stream = new MemoryStream()) { serializer.WriteObject(stream, entity); json = Encoding.UTF8.GetString(stream.GetBuffer(), 0, (int)stream.Length); } var guid = GetDeterministicGuid(json); eTagProperty.SetValue(entity, guid.ToString(), null); //... There are a couple of helper methods to check if the object has changed since the ETag value was last set, and to reset the ETag. This implementation uses JSON to do the serializing rather than XML. Benefit - should be marginally more efficient as your hashing a much smaller serialized string; downside, JSON doesn't include namespaces or class names at the root level, so if you have two classes with the exact same structure but different names, then instances which have the same content will have the same ETag. You may want that behaviour, but change to use the XML DataContractSerializer if you think that will be an issue. If you can persist the ETag somewhere, it will save you server processing to load up the entity, but that will only apply to scenarios where you can reliably invalidate your ETag (e.g. if you control all the entry points where entity contents can be updated, then you can calculate and persist the new ETag with each update).

  Read the article

• Ad-hoc reporting similar to Microstrategy/Pentaho - is OLAP really the only choice (is OLAP even sufficient)?

  - by TheBeefMightBeTough

  So I'm getting ready to develop an API in Java that will provide all dimensions, metrics, hierarchies, etc to a user such that they can pick and choose what they want (say, e.g., dimensions of Location (a store) and Weekly, and the metric Product Sales $), provide their choices to the api, and have it spit out an object that contains the answer to their question (the object would probably be a set of cells). I don't even believe there will be much drill up/down. The data warehouse the APIwill interface with is in a standard form (FACT tables, dimensions, star schema format). My question is, is an OLAP framework such as Mondrian the only way to achieve something akin to ad-hoc reporting? I can envisage a really large Cube (or VirtualCube) that contains most of the dimensions and metrics the user could ever want, which would give the illusion of ad-hoc reporting. The problem is that there is a ton of setup to do (so much XML) to get the framework to work with the data. Further it requires specific knowledge, such as MDX, and even moreso learning the framework peculiars (Mondrian API). Finally, I am not positive it will scale much better than simply making queries against a SQL database. OLAP to me feels like very old technology. Is performance really an issue anymore? The alternative I can think of would be dynamic SQL. If the existing tables in the data warehouse conform to a naming scheme (FACT_, DIM_, etc), or if a very simple config file/ database table containing config information existed that stored which tables are fact tables, which are dimensions, and what metrics are available, then couldn't the api read from that and assembly the appropriate sql query? Would this necessarily be harder than learning MDX, Mondrian (or another OLAP framework), and creating all the cubes? In general, I feel that OLAP is at the same time too powerful (supports drill up/down, complex functions) and outdated and am reluctant to base my architecture on it. However, I am unsure if the alternative(s), such as rolling my own ad-hoc reporting framework using dynamic SQL would remove any complexity while still fulfilling requirements, both functional and non-functional (e.g., scalability; some FACT tables have many millions of rows). I also wonder about other techniques (e.g., hive). Has anyone here tried to do ad-hoc reporting? Any advice? I expect this project to take a pretty long time (3 months min, but probably longer), so I just do not want to commit to an architecture without being absolutely sure of its pros and cons. Thanks so much.

  Read the article

• IXRepository and test problems

  - by Ridermansb

  Recently had a doubt about how and where to test repository methods. Let the following situation: I have an interface IRepository like this: public interface IRepository<T> where T: class, IEntity { IQueryable<T> Query(Expression<Func<T, bool>> expression); // ... Omitted } And a generic implementation of IRepository public class Repository<T> : IRepository<T> where T : class, IEntity { public IQueryable<T> Query(Expression<Func<T, bool>> expression) { return All().Where(expression).AsQueryable(); } } This is an implementation base that can be used by any repository. It contains the basic implementation of my ORM. Some repositories have specific filters, in which case we will IEmployeeRepository with a specific filter: public interface IEmployeeRepository : IRepository<Employee> { IQueryable<Employee> GetInactiveEmployees(); } And the implementation of IEmployeeRepository: public class EmployeeRepository : Repository<Employee>, IEmployeeRepository // TODO: I have a dependency with ORM at this point in Repository<Employee>. How to solve? How to test the GetInactiveEmployees method { public IQueryable<Employee> GetInactiveEmployees() { return Query(p => p.Status != StatusEmployeeEnum.Active || p.StartDate < DateTime.Now); } } Questions Is right to inherit Repository<Employee>? The goal is to reuse code once all implementing IRepository already been made. If EmployeeRepository inherit only IEmployeeRepository, I have to literally copy and paste the code of Repository<T>. In our example, in EmployeeRepository : Repository<Employee> our Repository lies in our ORM layer. We have a dependency here with our ORM impossible to perform some unit test. How to create a unit test to ensure that the filter GetInactiveEmployees return all Employees in which the Status != Active and StartDate < DateTime.Now. I can not create a Fake/Mock of IEmployeeRepository because I would be testing? Need to test the actual implementation of GetInactiveEmployees. The complete code can be found on Github

  Read the article

• Programming tourism

  - by Andrew_B

  I'm going on vacation to Paris, France for 10 days. Actually, it's my girlfriend's wish to go there but I'm not very interested in visiting, sightseeing, etc. Recently, I came up with an idea of trying to do something like programming tourism. :) I'd like to do something related to programming in a startup-like company. I do not want a salary or any kind of compensation. I want to overview process, social aspects, environment and "what it feels like" to development software in another country. I'm from Russia. I've been a software developer since 2003. I prefer C#4 but I'm ready to use anything Turing-complete. I have some MS certifications and am familiar with all .NETs since 1.1. Currently I'm finishing PhD in CS. I'm interested in multidimensional indexing and I can turn any piece of data and code to OLAP system. :) But it'd take too much time. What can I do? I have no more than one week. I want a totally complete project in a short amount of time. Implement some features in well-tested project Do a code review Debug memory, performance and concurrency issues Do unit testing So, about the questions: Is it legal? I'm ready to sign NDA if it's necessary. I'll have tourist visa. Is it possible? I'm really sure that bureaucratic companies with lots of HRs and PMs will not allow such experiments. But small companies can afford it. I'm ready to guarantee support on my code after leaving home :) P.S. I still havn't started learning French :) I hope it will not take too much time :) P.P.S. Yes, it's girlfriend-approved. What's in it for me? It's fun. It's fun to see new systems and people who created them. It's fun to complete meaningful things. Quickly. What's in it for them? Feature, debug, review or test. If my short-term colleagues will like this style of working I can invite them to make same trip into my company :) I think in Russia it's even more exciting :)

  Read the article

• How can I improve the battery life under 12.04 on my Inspiron 14z? [duplicate]

  - by cfogelberg

  This question already has an answer here: Tips to extend battery life for laptops and notebooks 24 answers How do I improve the battery life of my Inspiron 14z under Ubuntu 12.04? This laptop gets 4-5 hours of battery life using Windows (e.g. here). I've removed Windows, installed Ubuntu 12.04 and the initial battery life was only 2 hours. With some tweaks (described below) it's still only ~2.5 hours. For reference, the laptop is the latest model of the 14z: i5-3337U processor 32GB MSATA, 500GB HDD (5400rpm) AMD Radeon HD7570M graphics card I have put ext4 partitions on both the SSD and the HDD, and have mounted / to the SSD and /home to the HDD. I also put a 24gb linux swap partition at the start of the HDD, though I figure this won't be used all that much (the laptop has 8gb of RAM). After googling around and reading Ask Ubuntu and other sites extensively, I have done the following steps, and they have improved the battery life ~30 minutes (exact improvement not clear, but battery life is still nowhere near 4-5 hours). Installed Jupiter (and set Performance to "Power Saving") Installed laptop-mode-tools cat /proc/sys/vm/laptop_mode now outputs 5 (previously it output 0) But it's not clear that this will help: AskUbuntu question Turned down the brightness of my screen from full to 1/3 Other things I have heard about but have not tried for fear of frying the laptop or my linux install: Add "pcie_aspm=force" at the end of the line with "quiet splash" in /boot/grub/grub.cfg Enable ALPM, but it may already be enabled in 12.04? Enable i915 framebuffer compression Use a propietary driver for the graphics card? Turn off the graphics card? (what would happen if I relied on the internal Intel bridge?) Use TLP? Spin down the HDD more aggressively (howto, but I think laptop-mode-tools does this already) The only other thing I've noticed is that plastic just above the F5, F6 and F7 keys gets really hot. According to Jupiter my CPU temperature is only 69 celsius and the System Monitor shows CPU load at 7% so I don't think it's the CPU. Maybe it's the graphics card? Also, I've set up MongoDB and LAMP on the machine as well. When I run powertop MongoDB is high in the list, but I'm not sure if that's relevant to battery life because I'm not actually doing anything with MongoDB most of the time. Edit - Additional info as requested $ lspci -nnk | grep -iEA3 "(graphics|vga)" 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) Subsystem: Dell Device [1028:057f] Kernel driver in use: i915 Kernel modules: i915 -- 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] [1002:6841] Subsystem: Dell Device [1028:057f] Kernel driver in use: radeon Kernel modules: radeon

  Read the article

• How to configure a longer version Number in artifactory

  - by claudine

  The version-numbers for our jars have to be longer them x.x.x. We would rather need x.x.x.x to integrate some old-fashioned self-made mechanism. This is, because we tag our software with x.x.x and as soon as we have a delivery to a customer one specific jar has to be build exactly at this point of time to fit to another backend, which communicates with our program. For that reason this one jar has the version 2.3.4.1, when generated and in next delivery of the same Version it is build and named 2.3.4.2. Now artifactory cannot handle this an doesn't save more than x.x.x.2 in some cases. So we thought of maybe edit the regular expression in the maven repository layout (see attached Screenshot) Because testing the path in the field below shows, that it cannot handle the version number. Of course for the rest of our jars still x.x.x has to work.. For Example here is the maven-metadata.xml <?xml version="1.0" encoding="UTF-8"?> <metadata> <groupId>com.firm</groupId> <artifactId>someid</artifactId> <version>1.5.1</version> <versioning> <latest>1.5.1</latest> <release>1.5.1</release> <versions> <version>1.4.62</version> </versions> <lastUpdated>20120926073942</lastUpdated> </versioning> </metadata> The folder structure looks like: someid 1.4.62 1.4.62.1 1.4.62.2 1.4.62.3 If we deploy an new artifact version (1.4.62.1), the maven-metadata.xml contains the 1.4.62.1 version. But the artifactory overrides the version number (1.4.62.x) to (1.4.62) after an unspecified time. It seems that the artifactory only support major, minor and revision numbers, and deletes the buildnumber. Now we looking for a solution do disable this behavior. We use the JFrog Artifactory version 2.5.0 (rev. 13086). Any ideas, maybe? Thanks in andvance

  Read the article

• Finding "Stuff" In OUM

  - by Dave Burke

  One of the first questions people asked when they start using the Oracle Unified Method (OUM) is “how do I find X ?” Well of course no one is really looking for “X”!! but typically an OUM user might know the Task ID, or part of the Task Name, or maybe they just want to find out if there is any content within OUM that is related to a couple of keys words they have in their mind. Here are three quick tips I give people: 1. Open up one of the OUM Views, then click “Expand All”, and then use your Browser’s search function to locate a key Word. For example, Google Chrome or Internet Explorer: <CTRL> F, then type in a key Word, i.e. Architecture This is fast and easy option to use, but it only searches the current OUM page 2. Use the PDF view of OUM Open up one of the OUM Views, and then click the PDF View button located at the top of the View. Depending on your Browser’s settings, the PDF file will either open up in a new Window, or be saved to your local machine. In either case, once the PDF file is open, you can use the built in PDF search commands to search for key words across a large portion of the OUM Method Pack. This is great option for searching the entire Full Method View of OUM, including linked HTML pages, however the search will not included linked Documents, i.e. Word, Excel. 3. Use your operating systems file index to search for key words This is my favorite option, and one I use virtually every day. I happen to use Windows Search, but you could also use Google Desktop Search, of Finder on a MAC. All you need to do (on a Windows machine) is to make sure your local OUM folder structure is included in the Windows Index. Go to Control Panel, select Indexing Options, and ensure your OUM folder is included in the Index, i.e. C:/METHOD/OM40/OUM_5.6 Once your OUM folders are indexed, just open up Windows Search (or Google Desktop Search) and type in your key worlds, i.e. Unit Testing The reason I use this option the most is because the Search will take place across the entire content of the Indexed folders, included linked files. Happy searching!

  Read the article

• (Android) How are OpenGL ES 1 framebuffers and textures sized?

  - by jens

  I am trying to draw to a texture using a framebuffer using OpenGL ES 1.1 on Android, Java. Afterwords I want to overlay this texture full-screen over my game. In theory, this works like a charm, but somehow the coordinates are off. For testing I drew something at (0,0) with width and height 200, and it partly is off-screen. This is how I create the framebuffer: fb = new int[1]; depthRb = new int[1]; renderTex = new int[1]; gl11ep.glGenFramebuffersOES(1, fb, 0); gl11ep.glGenRenderbuffersOES(1, depthRb, 0); // the depth buffer gl.glGenTextures(1, renderTex, 0);// generate texture gl.glBindTexture(GL10.GL_TEXTURE_2D, renderTex[0]); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_LINEAR); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_S, GL10.GL_REPEAT); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_T, GL10.GL_REPEAT); texBuffer = ByteBuffer.allocateDirect(buf.length*4).order(ByteOrder.nativeOrder()).asIntBuffer(); gl.glTexImage2D(GL10.GL_TEXTURE_2D, 0, GL10.GL_LUMINANCE, texW, texH, 0, GL10.GL_LUMINANCE, GL10.GL_UNSIGNED_BYTE, texBuffer); gl11ep.glBindRenderbufferOES(GL11ExtensionPack.GL_RENDERBUFFER_OES, depthRb[0]); gl11ep.glRenderbufferStorageOES(GL11ExtensionPack.GL_RENDERBUFFER_OES, GL11ExtensionPack.GL_DEPTH_COMPONENT16, texW, texH); Before I draw, I do this: gl11ep.glBindFramebufferOES(GL11ExtensionPack.GL_FRAMEBUFFER_OES, fb[0]); gl.glClearColor(0f, 0f, 0f, 0f); // specify texture as color attachment gl11ep.glFramebufferTexture2DOES(GL11ExtensionPack.GL_FRAMEBUFFER_OES, GL11ExtensionPack.GL_COLOR_ATTACHMENT0_OES, GL10.GL_TEXTURE_2D, renderTex[0], 0); // attach render buffer as depth buffer gl11ep.glFramebufferRenderbufferOES(GL11ExtensionPack.GL_FRAMEBUFFER_OES, GL11ExtensionPack.GL_DEPTH_ATTACHMENT_OES, GL11ExtensionPack.GL_RENDERBUFFER_OES, depthRb[0]); I set texW = 1024 and texH = 512. When rendering this texture fullscreen, with a lightmask (size 200x200) placed at (0, 0) and (texW/2, texH/2). You can see that it seems like the coordinate system doesnt start at (0,0) as that light overlaps the screen and the images are not drawn as squares (my lightcone-texture is a circle, not an ellipse). So, how is the coordinate system of this offscreen-drawn texture defined? Thanks

  Read the article

• Should we persist with an employee still writing bad code after many years?

  - by user94986

  I've been assigned the task of managing developers for a well-established company. They have a single developer who specialises in all their C++ coding (since forever), but the quality of the work is abysmal. Code reviews and testing have revealed many problems, one of the worst being memory leaks. The developer has never tested his code for leaks, and I discovered that the applications could leak many MBs with only a minute of use. User's were reporting huge slowdowns, and his take was, "it's nothing to do with me - if they quit and restart, it's all good again." I've given him tools to detect and trace the leaks, and sat down with him for many hours to demonstrate how the tools are used, where the problems occur, and what to do to fix them. We're 6 months down the track, and I assigned him to write a new module. I reviewed it before it was integrated into our larger code base, and was dismayed to discover the same bad coding as before. The part that I find incomprehensible is that some of the coding is worse than amateurish. For example, he wanted a class (Foo) that could populate an object of another class (Bar). He decided that Foo would hold a reference to Bar, e.g.: class Foo { public: Foo(Bar& bar) : m_bar(bar) {} private: Bar& m_bar; }; But (for other reasons) he also needed a default constructor for Foo and, rather than question his initial design, he wrote this gem: Foo::Foo() : m_bar(*(new Bar)) {} So every time the default constructor is called, a Bar is leaked. To make matters worse, Foo allocates memory from the heap for 2 other objects, but he didn't write a destructor or copy constructor. So every allocation of Foo actually leaks 3 different objects, and you can imagine what happened when a Foo was copied. And - it only gets better - he repeated the same pattern on three other classes, so it isn't a one-off slip. The whole concept is wrong on so many levels. I would feel more understanding if this came from a total novice. But this guy has been doing this for many years and has had very focussed training and advice over the past few months. I realise he has been working without mentoring or peer reviews most of that time, but I'm beginning to feel he can't change. So my question is, would you persist with someone who is writing such obviously bad code?

  Read the article

• Are there software options (preferabbly .NET) for doing distance and speed analysis of footballers moving on video?

  - by Anonymous Type

  Editing Question for Clarity Thanks for feedback so far, very insightful. I'm not sure how far along this part of the software community is, and what if any libraries exist for me to leverage from. Heres what I'm trying to do. Problem: Take an existing video of a game of rugby league. The Rugby League field is 100 metres long, 70 metres wide, and has white line markings every 10 metres running along the width of the field, as well as along the sidelines. Each side has 13 players on the field. Players on each team have identical jerseys that normally constrast strongly against background colours (green/brown field colour) and the referee's colour (usually yellow) and the designated water runner (orange). All players have a unique number in thick white lettering on their backs for identification. Video is taken with a high definition camera. Currently only one camera is used (2D) and existing video does not contain a foreground object of fixed spatial dimensions (as suggested in one answer for comparision measurements, however I could add this to future filming sessions if it is worthwhile). The player's do not run in a straight line 50% of the time but will go sideways on on a diagonal to the play the ball. The distance measured always starts from the spot of the previous "tackle", which ends where the player stops forward movement. It is not always possible to determine the players number from the video (facing other direction, sunlight, others standing in the way of the camera). But this isn't important as the software could allow for manual inputting of unknown "runs" at a later point after analysis. Determine the distance between two points (i.e. where the player started his "run" and where he finished it). I'm guessing that this would be quite doable if I manually marked the start and end point in the video. But how would I use landmarks in the background to determine the distance (assuming the person taking the video has kept it from jerking around). Question: Do software packages or libraries exist that are specialised enough to assist with writing analysis software to determine a sports persons distance travelled based on video taken of the performance?

  Read the article

• Redesigning an Information System - Part 1

  - by dbradley

  Through the next few weeks or months I'd like to run a small series of articles sharing my experiences from the largest of the project I've worked on and explore some of the real-world problems I've come across and how we went about solving them. I'm afraid I can't give too many specifics on the project right now as it's not yet complete so you'll have to forgive me for being a little abstract in places! To start with I'm going to run through a little of the background of the problem and the motivations to re-design from scratch. Then I'll work through the approaches taken to understanding the requirements, designing, implementing, testing and migrating to the new system. Motivations for Re-designing a Large Information System The system is one that's been in place for a number of years and was originally designed to do a significantly different one to what it's now being used for. This is mainly due to the product maturing as well as client requirements changing. As with most information systems this one can be defined in four main areas of functionality: Input – adding information to the system Storage – persisting information in an efficient, searchable structure Output – delivering the information to the client Control – management of the process There can be a variety of reasons to re-design an existing system; a few of our own turned out to be factors such as: Overall system reliability System response time Failure isolation and recovery Maintainability of code and information General extensibility to solve future problem Separation of business and product concerns New or improved features The factor that started the thought process was the desire to improve the way in which information was entered into the system. However, this alone was not the entire reason for deciding to redesign. Business Drivers Typically all software engineers would always prefer to do a project from scratch themselves. It generally means you don't have to deal with problems created by predecessors and you can create your own absolutely perfect solution. However, the reality of working within a business is that the bottom line comes down to return on investment. For a medium sized business such as mine there must be actual value able to be delivered within a reasonable timeframe for any work to be started. As a result, any long term project will generally take a lot of effort and consideration to be approved by those in charge and therefore it might be better to break down the project into more manageable chunks which allow more frequent deliverables and also value within a shorter timeframe. As the only thing of concern was the methods for inputting information, this is where we started with requirements gathering and design. However knowing that there might be more to the problem and not limiting your design decisions before the requirements is key to finding the best solutions.

  Read the article

• PMDB Block Size Choice

  - by Brian Diehl

  Choosing a block size for the P6 PMDB database is not a difficult task. In fact, taking the default of 8k is going to be just fine. Block size is one of those things that is always hotly debated. Everyone has their personal preference and can sight plenty of good reasons for their choice. To add to the confusion, Oracle supports multiple block sizes withing the same instance. So how to decide and what is the justification? Like most OLTP systems, Oracle Primavera P6 has a wide variety of data. A typical table's average row size may be less than 50 bytes or upwards of 500 bytes. There are also several tables with BLOB types but the LOB data tends not to be very large. It is likely that no single block size would be perfect for every table. So how to choose? My preference is for the 8k (8192 bytes) block size. It is a good compromise that is not too small for the wider rows, yet not to big for the thin rows. It is also important to remember that database blocks are the smallest unit of change and caching. I prefer to have more, individual "working units" in my database. For an instance with 4gb of buffer cache, an 8k block will provide 524,288 blocks of cache. The following SQL*Plus script returns the average, median, min, and max rows per block. column "AVG(CNT)" format 999.99 set verify off select avg(cnt), median(cnt), min(cnt), max(cnt), count(*) from ( select dbms_rowid.ROWID_RELATIVE_FNO(rowid) , dbms_rowid.ROWID_BLOCK_NUMBER(rowid) , count(*) cnt from &tab group by dbms_rowid.ROWID_RELATIVE_FNO(rowid) , dbms_rowid.ROWID_BLOCK_NUMBER(rowid) ) Running this for the TASK table, I get this result on a database with an 8k block size. Each activity, on average, has about 19 rows per block. Enter value for tab: task AVG(CNT) MEDIAN(CNT) MIN(CNT) MAX(CNT) COUNT(*) -------- ----------- ---------- ---------- ---------- 18.72 19 3 28 415917 I recommend an 8k block size for the P6 transactional database. All of our internal performance and scalability test are done with this block size. This does not mean that other block sizes will not work. Instead, like many other parameters, this is the safest choice.

  Read the article

• What is the standard term for my role?

  - by sigil

  I'm doing work that involves writing code and managing developers in a "special projects" division of a large company. I'd like to define my role better and figure out if there's an industry standard term for what I do, so that it will be easier for me to research best practices and work on a career path What I do all day: A macro that connects an Excel sheet to an Access database is acting funny; I get called in to figure out what's happening and debug it. Someone needs data extracted from a bunch of files on Sharepoint. I figure out a client-side solution because I'm not authorized to do anything server-side and getting IT to do anything would take several months and need a business case. A manager wants a new data entry tool for their team. I interview the manager and team members to work out the functional requirements, then design/develop/test the application. Someone needs a VBA script to crunch some data for their presentation that's due in two hours. I drop everything I'm doing to hack out a quick script and run the analysis, without much in the way of testing. A developer has been hired to build a database for one of the teams, since I'm working on too many different things and don't have time to take this project on in the timeframe required. I direct his work and push him to meet certain deadlines, interview stakeholders to get more info that will help him figure out how to build the necessary forms, and modify the functional requirements of the database to fit in the timeframe. Someone wants to load a set of data into a GIS system and set up an ongoing refresh and reporting of this data set. I facilitate the conversation between the GIS developers and the owners of this data set, and design a demo application as proof of concept. It's kind of an "all-purpose programming and IT management" position, but it's not officially IT because the company has an actual IT department with a rigorously defined system of submitting requests, developing code, and managing projects. What I do, I guess, is more of a handyman job, where stuff falls to me because I'm the geekiest one in the room. Is there a standard term in the software world for what I do?

  Read the article

• Down to the Wire - Yet More Solaris Things to See at OpenWorld (and JavaOne!)

  - by Larry Wake

  San Francisco is bracing for the annual invasion. The airport's jammed, the tweets are flying, and the numbers are crazy: more than 50,000 attendees and 2,500+ sessions, taking over Moscone Convention Center, two streets, Union Square, and seemingly every hotel in town (98,000 hotel room nights). So yeah, it's busy. And it's not just OpenWorld--we've also got JavaOne, MySQL Connect, and four other sub-events going on as well. Speaking of JavaOne, you can find Solaris-related activity there, too -- I've highlighted one hands-on lab below. Here's a last pre-event roundup of activities for consideration; enjoy the show(s)! (Remember, Schedule Builder is your friend; use it with the session numbers below to register.) Monday, October 1st: 3:15 PM - General Session: Accelerate Your Business with the Oracle Hardware Advantage(GEN9691, Moscone North Hall D) John Fowler, head of Oracle's Systems organization, will talk about Oracle hardware technology and how it's co-engineered with other key technologies, including Oracle Solaris. Tuesday, October 2nd: 10:15 AM - Building an IaaS Platform with SPARC, Oracle Solaris 11, and Oracle VM Server for SPARC(CON4431, Moscone South 270)Get the birds-eye lowdown (whatever that means) on how U.S. Cellular  built its Infrastructure as a Service (IaaS) cloud delivery platform with Oracle’s SPARC T4 servers, Oracle Solaris 11, Oracle Solaris Cluster 4, and Oracle VM Server for SPARC. The session covers the high-level design, business case made, implementation details, and lessons learned. 11:45 AM - Oracle Solaris 11 Panel: Insights and Directions from Oracle Solaris Core Engineering(CON8790, Moscone South 252) This has been one of the livelier Solaris-related sessions in years past (and I'm not saying that just because I get to moderate it this year). A panel of core engineers responsible for a wide range of key Solaris technologies will talk about some of the interesting work they've been doing -- but mostly we keep time open for the panel to take questions from attendees, because that's the fun part. Wednesday, October 3rd: 10:00 AM - Tracing Your Java Application Tuning on Oracle Solaris with DTrace(HOL10214, Hilton San Francisco, Franciscan A/B/C/D) This JavaOne hands-on lab will show how to use the DTrace framework to dynamically trace your Java applications on Oracle Solaris and uncover new tuning opportunities. Thursday, October 4th: 12:45 PM - Oracle Solaris 11: Optimized for Oracle Database, Oracle WebLogic Server, and Java(CON8800, Moscone South 252) Explore how Oracle Solaris 11 has been built to be the best platform for the cloud and enterprise applications, with built-in optimizations to improve performance and deliver unique functionality with Oracle Database, Oracle WebLogic Server, and Java.

  Read the article

• Core i7-620M vs Core i5-540M

  - by Shalan

  Hi, I'm recommending a laptop to a colleague, and the specific laptop he has chosen has the above CPU chips as options. Both chips have 2-cores/4-threads. The i7-620M is a 2.66 GHz (4MB Cache) while the i5-540M is a 2.53 GHz (3MB Cache)....both Arrandale architecture. He is a .NET programmer working with SQL Server and Oracle, and occasionally uses Adobe Fireworks for web-related design elements. He also loves playing around in Adobe Premiere Pro, and does a lot of media/video work. Would you notice any significant performance difference between the 2? The laptop manufacturer claims that the battery life on both is the same irrespective of the chip used (although I find that hard to believe), but there is a major cost difference between them, with the Core i7-620M being the more expensive. According to http://ark.intel.com, the one thing that seems different (besides the obvious speeds/frequencies/etc) is a feature called "Embedded" - what is this exactly? You can see the quick comparison here - http://ark.intel.com/Compare.aspx?ids=43544,43560 I would sincerely appreciate any advice me on this. THANKS!

  Read the article

< Previous Page | 701 702 703 704 705 706 707 708 709 710 711 712  | Next Page >