Search Results

Search found 20671 results on 827 pages for 'android device'.

Page 706/827 | < Previous Page | 702 703 704 705 706 707 708 709 710 711 712 713  | Next Page >

• LiveCD Boot/Install

  - by Jon

  I have recently built a new computer and have been looking to dual-boot alongside Windows. Trying to boot/install off Ubuntu/Dedora/Arch live CDs has failed across all distros and I keep getting the error: [34.5173939] ata9.00: exception Emask 0x52 SAct 0x1 SErr 0xffffffff action 0xe frozen [34.517403] ata9: SError: {RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIR DevExch } [34.517413] ata9.00: failed command: READ FPDMA QUEUED [34.517420] ata9.00: cmd 60/08:00:00:6d:70/00:00:74:00:00/40 tag 0 ncq 4096 in [34.517420] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [34.517433] ata9.00: status: { DRDY } [34.667134] ata10.00 exception Emask 0x52 SAct 0x1 SErr 0xffffffff action 0xe frozen [34.667134] ata10: SError: {RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIR DevExch } [34.667153] ata10.00: failed command: IDENTIFY PACKET DEVICE [34.667159] ata10.00: cmd a1/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [34.667160] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [34.667170] ata10.00: status: { DRDY } I am using a new ASUS Z77 Sabertooth motherboard with a Seagate Barracuda ST1000DM003 1TB 7200RPM hard drive. I am not entirely sure why I can't even boot off the live CD? Any ideas? Hi thanks for the quick response. All Distros were direct download from their respective websites, I have tried both CD boot with all distros and USB boot with Arch only. I have just updated my BIOS as well an am still receiving the same error. The fact that it happens on CD and USB tell's me it's not an optical drive issue. All information I can find on this seems to relate to hard drives failing on already installed linux boxes or faulty SATA cables. I am a bit confused why this issue would be preventing a CD/USB boot though. Is there any more info I can provide that might help uncover the source of the problem? Cheers, Jon

  Read the article

• Impossible to boot Ubuntu on a USB stick (OS X Montain Lion)

  - by user109513

  I know this has been discussed over and over but I still cannot run Ubuntu on a USB stick. Here's the step I followed: 1. I downloaded Ubuntu 12.10 (ubuntu-12.10-desktop-i386.iso) from http://www.ubuntu.com/download/desktop which I renamed 'ubuntu.iso'. I bought my Mac mid-2010, it has an Intel processor. 2. I formated my 16GB USB stick with HFS+ File System following this tutorial: http://www.switchingtomac.com/tutorials/how-to-format-a-drive-or-partition-with-the-hfs-file-system 3. I opened a terminal and typed: hdiutil convert -format UDRW -o ~/Downloads/ubuntu.img ~/Downloads/ubuntu.iso It created ubuntu.iso.dmg 4. I ran 'diskutil list' and identified the device node assigned to the USB. 5. I unmounted it: diskutil unmountDisk /dev/disk2 6. Then, I entered the command: sudo dd if=~/Downloads/ubuntu.img.dmg of=/dev/rdisk2 bs=1m. It seemed to work. A Mac message poped up saying that the system doesn't recognized the disk, I pressed 'ignore'. 7. I ejected the USB using diskutil eject /dev/disk2, then removed the USB. 8. I rebooted the computer, plugged the USB key, pressed ALT.I could see my Macintosh partition and my Windows partition, but couldn't see my USB stick. Any help will be very appreciated :) Victor

  Read the article

• Install VirtualBox Guest Additions "Feisty Fawn"

  - by codebone

  I am trying to install the virtualbox guest additions into a feisty fawn (7.04) VM. The problem I am running into is that when I Click install guest additions, or place the iso in the drive manually, the disk never shows up in the machine. I even manually mounted and went to the mounted directory and it was empty. When using the file browser, doubling clicking on the cdrom yields Unable to mount the selected volume. mount: special device /dev/hdc does not exist. Secondly, I tried installing via repository... but according to the system, I have no internet connection. But, I can browse the web using firefox just fine (in the guest). Here is my /etc/network/interfaces file... code auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp I also tryed setting a static ip... auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.253 netmask 255.255.255.0 gateway 192.168.1.1 The reason I am trying to get this particular installation running is because it is part of a book, "Hacking: The Art of Exploitation" (Jon Erickson), and is fully loaded wilh tools and such to go along exactly with the book. I appreciate any effort into finding a solution for this! Thanks

  Read the article

• How do I install BCM4312 wireless drivers?

  - by t3ch

  completely new to Ubuntu. How do I add Wireless driver for my laptop? I am running a Dell XPS M1330. Right now its acts as if I dont have a Wi-Fi card. :~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GS] (rev a1) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) 09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

  Read the article

• How To Access Your eBook Collection Anywhere in the World

  - by Jason Fitzpatrick

  If you have an eBook reader it’s likely you already have a collection of eBooks you sync to your reader from your home computer. What if you’re away from home or not sitting at your computer? Learn how to download books from your personal collection anywhere in the world (or just from your backyard). You have an eBook reader, you have an eBook collection, and when you remember to sync your books to the collection on your computer everything is rosy. What about when you forget or when the syncing process for your device is a bit of a hassle? (We’re looking at you, iPad.) Today we’re going to show you how to download eBooks to your eBook reader from anywhere in the world using a cross-platform solution Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? Sunrise on the Alien Desert Planet Wallpaper Add Falling Snow to Webpages with the Snowfall Extension for Opera [Browser Fun] Automatically Keep Up With the Latest Releases from Mozilla Labs in Firefox 4.0 A Look Back at 2010 Through Infographics Monitor the Weather with the Weather Forecast Extension for Opera Orbiting at the Edge of the Atmosphere Wallpaper

  Read the article

• DIA2012

  - by Chris Kawalek

  If you've read this blog before, you probably know that Oracle desktop virtualization is used to demonstrate Oracle Applications at many different trade shows. This week, the Oracle desktop team is at DIA2012 in Philadelphia, PA. The DIA conference is a large event, hosting about 7,000 professionals in the pharmaceutical, bio technology, and medical device fields. Healthcare and associated fields are leveraging desktop virtualization because the model is a natural fit due to their high security requirements. Keeping all the data on the server and not distributing it on laptops or PCs that could be stolen makes a lot of sense when you're talking about patient records and other sensitive information. We're proud to be supporting the Oracle Health Sciences team at DIA2012 by hosting all of the Oracle healthcare related demos on a central server, and providing simple, smart card based access using our Sun Ray Clients. And remember that you're not limited to using just Sun Ray Clients--you can also use the Oracle Virtual Desktop Client and freely move your session from your iPad, your Windows or Linux PC, your Mac, or Sun Ray Clients. It's a truly mobile solution for an industry that requires mobile, secure access in order to remain compliant. Here are some pics from the show: We also have an informative PDF on Oracle desktop virtualization and Oracle healthcare that you can have a look at.  (Many thanks to Adam Workman for the pics!) -Chris  For more information, please go to the Oracle Virtualization web page, or  follow us at :  Twitter   Facebook YouTube Newsletter

  Read the article

• Strange Ubuntu Random Display [Video]

  - by d4v1dv00

  I had this random display issue ever since Ubuntu 11.04 and now running Ubuntu 11.10 and this problem still persist. It is very hard for me to explain, so I uploaded a video to elaborate itself. Before I convert from Windows 7, this issue never happened. The symptom is so random that I cannot reproduce or tell precisely when will this happen again. My wild guess is, should this be related to driver? Below are my detail system information: $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation H67 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57788 Gigabit Ethernet PCIe (rev 01) is there any other information i need to post and how do i do that?

  Read the article

• What's the best algorithm for... [closed]

  - by Paska

  Hi programmers! Today come out a little problem. I have an array of coordinates (latitude and longitude) maded in this way: [0] = "45.01234,9.12345" [1] = "46.11111,9.12345" [2] = "47.22222,9.98765" [...] etc In a loop, convert these coordinates in meters (UTM northing / UTM easting) and after that i convert these coords in pixel (X / Y) on screen (the output device is an iphone) to draw a route line on a custom map. [0] = "512335.00000,502333.666666" [...] etc The returning pixel are passed to a method that draw a line on screen (simulating a route calculation). [0] = "20,30" [1] = "21,31" [2] = "25,40" [...] etc As coordinate (lat/lon) are too many, i need to truncate lat/lon array eliminating the values that doesn't fill in the map bound (the visible part of map on screen). Map bounds are 2 couple of coords lat/lon, upper left and lower right. Now, what is the best way to loop on this array (NOT SORTED) and check if a value is or not in bound and after remove the value that is outside? To return a clean array that contains only the coords visible on screen? Note: the coords array is a very big array. 4000/5000 couple of items. This is a method that should be looped every drag or zoom. Anyone have an idea to optimize search and controls in this array? many thanks, A

  Read the article

• Kubuntu 12.04 - DNS Issues

  - by AndrewJesaitis

  Starting yesterday (6/11/12), I've been having many network problems. When requesting a page in chrome, the page hangs on "Sending request" and then will eventually timeout. I'm within a VPN that has it's own DNS server. I've tried to manually set my DNS through the Network-Manager applet and by editing /etc/network/interfaces. Having no luck I unlinked the resolv.conf file and dumped the contents of my old resolv.conf into it. Again having no luck, I deactivated the dnsmasq server in /etc/NetworkManager/NetworkManager.conf by commenting out the dns=dnsmasq. $ cat NetworkManager.conf [main] plugins=ifupdown,keyfile #dns=dnsmasq no-auto-default=D0:67:E5:EA:B6:6B, [ifupdown] managed=false $ nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: tg3 State: connected Default: yes HW Address: D0:67:E5:EA:B6:6B Capabilities: Carrier Detect: yes Speed: 1000 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.254.122 Prefix: 24 (255.255.255.0) Gateway: 192.168.254.2 DNS: 192.168.254.1 What is strange is that the network will work fine for a few minutes then start to timeout. A few minutes later it will work again. I'm unable to hit internal or external sites when it is timing out. When I $dig local sites, I receive no answer. I do receive an answer from google.com. At this point, I would usually blame the DNS Server, especially since when I change to Google's DNS server things work. But, I need to use our internal DNS to hit our internal sites. Nobody else is having issues and they are all using DHCP. This group includes one user who is using 11.04. At this point, I'm at a loss for what to do, so any help would be appreciated.

  Read the article

• Gemalto Mobile Payment Platform on Oracle T4

  - by user938730

  Gemalto is the world leader in digital security, at the heart of our rapidly evolving digital society. Billions of people worldwide increasingly want the freedom to communicate, travel, shop, bank, entertain and work – anytime, everywhere – in ways that are convenient, enjoyable and secure. Gemalto delivers on their expanding needs for personal mobile services, payment security, identity protection, authenticated online services, cloud computing access, eHealthcare and eGovernment services, modern transportation solutions, and M2M communication. Gemalto’s solutions for Mobile Financial Services are deployed at over 70 customers worldwide, transforming the way people shop, pay and manage personal finance. In developing markets, Gemalto Mobile Money solutions are helping to remove the barriers to financial access for the unbanked and under-served, by turning any mobile device into a payment and banking instrument. In recent benchmarks by our Oracle ISVe Labs, the Gemalto Mobile Payment Platform demonstrated outstanding performance and scalability using the new T4-based Oracle Sun machines running Solaris 11. Using a clustered environment on a mid-range 2x2.85GHz T4-2 Server (16 cores total, 128GB memory) for the application tier, and an additional dedicated Intel-based (2x3.2GHz Intel-Xeon X4200) Oracle database server, the platform processed more than 1,000 transactions per second, limited only by database capacity --higher performance was easily achievable with a stronger database server. Near linear scalability was observed by increasing the number of application software components in the cluster. These results show an increase of nearly 300% in processing power and capacity on the new T4-based servers relative to the previous generation of Oracle Sun CMT servers, and for a comparable price. In the fast-evolving Mobile Payment market, it is crucial that the underlying technology seamlessly supports Service Providers as the customer-base ramps up, use cases evolve and new services are launched. These benchmark results demonstrate that the Gemalto Mobile Payment Platform is designed to meet the needs of any deployment scale, whether targeting 5 or 100 million subscribers. Oracle Solaris 11 DTrace technology helped to pinpoint performance issues and tune the system accordingly to achieve optimal computation resources utilization.

  Read the article

• cannot mount root filesystem on 10.04

  - by howaryoo

  I tried to apply the recommendation of question: Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) After running that command: sudo mount --bind /dev /mnt/dev I get this error message: mount: mount point /mnt/dev does not exist fdisk -l returns /dev/sda1 /dev/sda2 /dev/sda5 do I need to mount sda2 and sda5? Edited after @psusi's comment: /dev/sda1 is the boot file system It seems that I need to mount sda2 or sda5. Here is what I tried: (I tried this on a virtual machine so the sda(s) are now vda(s) ) ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/vda: 19.3 GB, 19327352832 bytes 16 heads, 63 sectors/track, 37449 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0008eece Device Boot Start End Blocks Id System /dev/vda1 * 3 496 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/vda2 498 37448 18622465 5 Extended Partition 2 does not end on cylinder boundary. /dev/vda5 498 37448 18622464 8e Linux LVM ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo mount -t ext4 /dev/vda5 /mnt mount: wrong fs type, bad option, bad superblock on /dev/vda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ sudo mount -t ext2 /dev/vda5 /mnt mount: wrong fs type, bad option, bad superblock on /dev/vda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ Any info that can help me rescue that server would be greatly appreciated!

  Read the article

• Can't Mount Phone, "according to mtab, /dev/sdb1 is already mounted on /"

  - by RPG Master

  My myTouch Slide wasn't mounting, so I decided to open Disk Utility. My phone shows up but when I click "Mount" it gives me this error: Error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on / mount failed Here's my mtab: /dev/sdb1 / ext4 rw,errors=remount-ro,commit=0 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 none /sys sysfs rw,noexec,nosuid,nodev 0 0 fusectl /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 none /dev devtmpfs rw,mode=0755 0 0 none /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 none /dev/shm tmpfs rw,nosuid,nodev 0 0 none /var/run tmpfs rw,nosuid,mode=0755 0 0 none /var/lock tmpfs rw,noexec,nosuid,nodev 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/matthew/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=matthew 0 0 /dev/sdg1 /media/Seagate\040GoFlex ext4 rw,nosuid,nodev,uhelper=udisks 0 0 EDIT: Here's my fstab: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=3b0db205-2bdb-4c98-a506-6bdd3520d540 none swap sw 0 0

  Read the article

• Can't install Ubuntu on Asus Eee 1015pem

  - by Peter

  I'm having trouble to install Ubuntu. I use a ASUS Eee 1015pem netbook. Recently, I my netbook got wet. I had it inside my backback and all my things got wet. The netbook boots up fine but it will not load the OS. I downloaded ubuntu onto my external hard drive and changed the settings in my Bios to boot from a removable device. Nothing happens. When I plug in my external hard drive I'm not able to get to the boot icon. I have to unplug it the external hard drive. Set my boot settings I tried both Removable and CD-Rom. Than I plug my external drive back in and nothing happens on either settings. My Asus never came with a recovery disk and suppose to have a build in recovery by pressing F9 in the Bios. Also I need to disable Boot Booster in Bios and Boot Booster is not even an opition in Bios. My friend told me try installing Ubuntu but now I'm having no luck with Ubuntu. Any suggestions?

  Read the article

• Blogging from Office RT

  - by Dennis Vroegop

  During the last Build conference all attendees were given a brand new sparkling exciting Surface RT device (I love that machine despite its name but that's beside the point). On it came a version of Office 2013 RT, or better: the preview version. Now, I translated that term "Preview" to "Beta". Which is OK, since I've been using a lot of beta products from Microsoft and they all were great. And then I wanted to post a blogposting from Word. I knew I could, I have been doing this for a long time (I prefer Live Writer but that isn't available on Windows 8 RT). So I wrote the entry and hit "Publish". Instead of my blogsite I got a nice non-descriptive error telling me I couldn't post. So I fired up my other (Intel based) Win8 tablet, opened Word RT Preview, it loaded my blogpost (you've got to love the automatic synchronization through Skydrive) and tried from that machine. Same error. So, I installed Live Writer (remember, the other machine is Intel based) and posted from there. That worked like a charm. Apparently, there was something wrong with Word. I gave up and didn't think about it anymore. Yet… what you're reading now is written in Word 2013 RT on my Surface RT. So what did do? Simple: I updated from the Preview version to the final version. That's all there was to it. So…. If you're still on the preview I urge you to upgrade. You need to go to the "classic desktop update" window instead of going through the Windows Store App style update since Office is a desktop system, but once you do that you'll have the full version as well. Happy blogging!

  Read the article

• Dlink DWA-643 ExpressCard / Atheros AR5008 can't connect to wifi networks

  - by Justin Kelly

  I've just purchased a D-Link DWA-643 Xtreme N ExpressCard Notebook Adapter - but it can't connect to my wireless network The card is listed on the FSF website and - refer links below: http://www.fsf.org/resources/hw/index_html/net/wireless/index_html/cards.html http://www.dlink.com.au/products/?pid=550 Ubuntu see the card as using the Atheros AR5008 chipset - refer image below The card lights up and I can see that available wifi networks using this card - so it seems to 'just work' on ubuntu 12.04 but when i try and connect to my networks - it fails I've tried setting the network to all the different options (WEP, WPA2, no encryption, etc.. b/g/n ) but ubuntu sill cant connect to it I've also installed wicd but still couldn't connect Has anyone got a DWA-643 to work in Ubuntu? Or does anyone have any suggestion on how to get it to connect?? Any help would be greatly appreciated Note: the laptop has built in wifi but its broadcom, works but with dialup speed connection - and i've had nothign but trouble using the boardcom drivers so purchased the FSF recommended PCI expresscard as i hoped it would 'just work' on the latest Ubuntu i've have tried to disable the built in wifi - broadcom - but even with the broadcom uninstall and unavailable it didnt help the dlink to connect previously I had MAC address filtering on the router - i've added the dlinks MAC - and also disabled MAC address filtering - still no luck lspci output below: 18:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: D-Link System Inc Device 3a6f Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at e4000000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• How do I use depth testing and texture transparency together in my 2.5D world?

  - by nbolton

  Note: I've already found an answer (which I will post after this question) - I was just wondering if I was doing it right, or if there is a better way. I'm making a "2.5D" isometric game using OpenGL ES (JOGL). By "2.5D", I mean that the world is 3D, but it is rendered using 2D isometric tiles. The original problem I had to solve was that my textures had to be rendered in order (from back to front), so that the tiles overlapped properly to create the proper effect. After some reading, I quickly realised that this is the "old hat" 2D approach. This became difficult to do efficiently, since the 3D world can be modified by the player (so stuff can appear anywhere in 3D space) - so it seemed logical that I take advantage of the depth buffer. This meant that I didn't have to worry about rendering stuff in the correct order. However, I faced a problem. If you use GL_DEPTH_TEST and GL_BLEND together, it creates an effect where objects are blended with the background before they are "sorted" by z order (meaning that you get a weird kind of overlap where the transparency should be). Here's some pseudo code that should illustrate the problem (incidentally, I'm using libgdx for Android). create() { // ... // some other code here // ... Gdx.gl.glEnable(GL10.GL_DEPTH_TEST); Gdx.gl.glEnable(GL10.GL_BLEND); } render() { Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); Gdx.gl.glBlendFunc(GL10.GL_SRC_ALPHA, GL10.GL_ONE_MINUS_SRC_ALPHA); // ... // bind texture and create vertices // ... } So the question is: How do I solve the transparency overlap problem?

  Read the article

• Design pattern for an automated mechanical test bench

  - by JJS

  Background I have a test fixture with a number of communication/data acquisition devices on it that is used as an end of line test for a product. Because of all the various sensors used in the bench and the need to run the test procedure in near real-time, I'm having a hard time structuring the program to be more friendly to modify later on. For example, a National Instruments USB data acquisition device is used to control an analog output (load) and monitor an analog input (current), a digital scale with a serial data interface measures position, an air pressure gauge with a different serial data interface, and the product is interfaced through a proprietary DLL that handles its own serial communication. The hard part The "real-time" aspect of the program is my biggest tripping point. For example, I need to time how long the product needs to go from position 0 to position 10,000 to the tenth of a second. While it's traveling, I need to ramp up an output of the NI DAQ when it reaches position 6,000 and ramp it down when it reaches position 8,000. This sort of control looks easy from browsing NI's LabVIEW docs but I'm stuck with C# for now. All external communication is done by polling which makes for lots of annoying loops. I've slapped together a loose Producer Consumer model where the Producer thread loops through reading the sensors and sets the outputs. The Consumer thread executes functions containing timed loops that poll the Producer for current data and execute movement commands as required. The UI thread polls both threads for updating some gauges indicating current test progress. Unsure where to start Is there a more appropriate pattern for this type of application? Are there any good resources for writing control loops in software (non-LabVIEW) that interface with external sensors and whatnot?

  Read the article

• How to go from mainstream to indie development?

  - by Salano Software

  I'm currently working as a game programmer for a AAA-level developer and publisher - which falls into the 'nice problem to have' category, I know, except that I'm growing more and more disenchanted with the direction of both the company and the AAA portion of the industry as a whole. I don't see any games on the studio's calendar for the next several years that I'm actually interested in working on; it looks like a continuing parade of sequels, license extensions and largely-derivative work. Which isn't to say that there won't be interesting things to do on those projects; but more and more I find myself wanting to do something fundamentally different. It seems like the market's never been better for smaller-scale projects, and I'd love to jump into that (and I've done small demos for Android and have started digging into iOS), but I obviously can't put anything out while I'm working for the company, and I'm concerned that I shouldn't even do substantial development in my spare time on anything I'd eventually like to release on my own. At the same time, I'm leery of leaving the job I've got for hopefully-obvious reasons, especially without a specific plan in place. Has anyone out there got experience with 'going indie' out of a mainstream job, and does anyone have specific suggestions as to what the best approach is and what I should specifically be thinking about or be careful of?

  Read the article

• How do I get a Laserjet M1212nf MFP working?

  - by Leandro

  I am trying to install a multifunctional printer Laserjet M1212nf MFP on Ubuntu 12.04. I downloaded and install the hplip indicated by the official web site. At the end of the installation I chose reboot the whole system and next I call hp-setup in the terminal (as normal user and then as root). After select in the dialog box my printer I got the following error: Searching... (bus=usb, search=(None), desc=0)<br> /Traceback (most recent call last):<br> File "/usr/share/hplip/ui4/setupdialog.py", line 1255, in NextButton_clicked<br> self.showAddPrinterPage()<br> File "/usr/share/hplip/ui4/setupdialog.py", line 690, in showAddPrinterPage<br> self.readwriteFaxInformation()<br> File "/usr/share/hplip/ui4/setupdialog.py", line 1079, in readwriteFaxInformation<br> self.fax_name_company = unicode(d.getStationName())<br> UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 20: ordinal not in range(128) I think at this stage the plugin should be downloaded, but it is not working. Any suggestion on how to solve this problem ? Edition: After running hp-toolbox I got the following error message : Unable to communicate with device (code=12): hp:/usb /HP_LaserJet_Professional_M1212nf_MFP?serial=000000000ST10HPQSI1c

  Read the article

• Updating games for iOS 6 and new iPhone/iPod Touch

  - by SundayMonday

  Say I have a game that runs full-screen on iPhone 4S and older devices. The balance of the game is just right for the 480 x 320 screen and associated aspect ratio. Now I want to update my game to run full-screen on the new iPhone/iPod Touch where the aspect ratio of the screen is different. It seems like this can be challenging for some games in terms of maintaining the "balance". For example if the extra screen space was just tacked onto the right side of Jet Pack Joyride the balance would be thrown off since the user now has more time to see and react to obstacles. Also it could be challenging in terms of code maintenance. Perhaps Jet Pack Joyride would slightly increase the speed of approaching obstacles when the game is played on newer devices. However this quickly becomes messy when extra conditional statements are added all over the code. One solution is to have some parameters that are set in once place at start-up depending on the device type. What are some strategies for updating iOS games to run on the new iPhone and iPod Touch?

  Read the article

• Antenna Aligner part 2: Finding the right direction

  - by Chris George

  Last time I managed to get "my first app(tm)" built, published and running on my iPhone. This was really cool, a piece of my code running on my very own device. Ok, so I'm easily pleased! The next challenge was actually trying to determine what it was I wanted this app to do, and how to do it. Reverting back to good old paper and pen, I started sketching out designs for the app. I knew I wanted it to get a list of transmitters, then clicking on a transmitter would display a compass type view, with an arrow pointing the right way. I figured there would not be much point in continuing until I know I could do the graphical part of the project, i.e. the rotating compass, so armed with that reasoning (plus the fact I just wanted to get on and code!), I once again dived into visual studio. Using my friend (google) I found some example code for getting the compass data from the phone using the PhoneGap framework. // onSuccess: Get the current heading // function onSuccess(heading) {    alert('Heading: ' + heading); } navigator.compass.getCurrentHeading(onSuccess, onError); Using the ripple mobile emulator this showed that it was successfully getting the compass heading. But it didn't work when uploaded to my phone. It turns out that the examples I had been looking at were for PhoneGap 1.0, and Nomad uses PhoneGap 1.4.1. In 1.4.1, getCurrentHeading provides a compass object to onSuccess, not just a numeric value, so the code now looks like // onSuccess: Get the current magnetic heading // function onSuccess(heading) {    alert('Heading: ' + heading.magneticHeading); }; navigator.compass.getCurrentHeading(onSuccess, onError); So the lesson learnt from this... read the documentation for the version you are actually using! This does, however, lead to compatibility problems with ripple as it only supports 1.0 which is a real pain. I hope that the ripple system is updated sometime soon.

  Read the article

• What I saw at TechEd North America 2014

  - by Brian Schroer

  Originally posted on: http://geekswithblogs.net/brians/archive/2014/05/19/teched-north-america-2014.aspxI was thrilled to be able to attend TechEd North America 2014 in Houston last week. I got to go to Orlando in 2008, and since then I’ve had to settle for watching the sessions online (which ain’t bad – They’re all available on Channel 9 for streaming or downloading. Here are links to the Developer Track sessions and to the sessions from all tracks.) The sessions I attended (with my favorites bolded) were: Shiny new stuff The Microsoft Application Platform for Developers: Create Applications That Span Devices and Services INTRODUCING: The Future of .NET on the Server DEEP DIVE: The Future of .NET on the Server ASP.NET: Building Web Application Using ASP.NET and Visual Studio The Next Generation of .NET for Building Applications The Future of Visual Basic and C# Stuff you can use now Building Rich Apps with AngularJS on ASP.NET Get the Most Out of Your Code Maps SignalR: Building Real-Time Applications with ASP.NET SignalR Performance Optimize Your ASP.NET Web App Modern Web and Visual Studio Visual Studio Power User: Tips and Tricks Debugging Tips and Tricks in Visual Studio 2013 In a world where the whole company uses TFS… Using Functional, Exploratory and Acceptance Testing to Release with Confidence A Practical View of Release Management for Visual Studio 2013 From Vanity to Value, Metrics That Matter: Improving Lean and Agile, Kanban, and Scrum Ain’t Nobody Got Time for That As usual, there were some time slots with nothing of interest and others with 5 things I wanted to see at the same time. Here are the sessions I’m still planning to watch… Getting Started with TypeScript Building a Large Scale JavaScript Application in TypeScript Modern Application Lifecycle Management Why a Hacker Can Own Your Web Servers in a Day! Async Best Practices for C# and Visual Basic Building Multi-Device Apps with the New Visual Studio Tooling for Apache Cordova Applying S.O.L.I.D. Principles in .NET/C# Native Mobile Application Development for iOS, Android, and Windows in C# and Visual Studio Using Xamarin Latest Innovations in Developing ASP.NET MVC Web Applications Zero to Hero: Untested to Tested with Microsoft Fakes Using Visual Studio Cool and Elegant ASP.NET Web Forms with HTML 5 for the Modern Web The Present and Future of .NET in a World of Devices and Services

  Read the article

• Lost files after installing Ubuntu

  - by Joshua Rosato

  I installed Ubuntu on my laptop over windows, I had 2 partitions on one hard disk. It seems like my second partition is gone with all my files. How can I recover the old files? They weren't on the same partition as Windows. I read that the partition has probably just not been mounted so ran sudo fdisk -l to find all the partitions and then ran sudo mount, however I can't tell from the results of sudo mount what is not mounted and I am also unsure how to mount it once I find the unmounted partition. sudo fdisk -l - Results Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002c6dc Device Boot Start End Blocks Id System /dev/sda1 * 2048 486322175 243160064 83 Linux /dev/sda2 486324222 488396799 1036289 5 Extended /dev/sda5 486324224 488396799 1036288 82 Linux swap / Solaris sudo mount - Results /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/cgroup type tmpfs (rw) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) none on /sys/fs/pstore type pstore (rw) systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd) gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=joshy1)

  Read the article

• Mouse wheel speed, a permanent solution?

  - by Logan

  I would like to address an issue that has been around for a while now. The wireless mouse's wheel speed is abnormally fast on Ubuntu (as well as Mac Osx, as I have read) and the way to fix this temporarily is to unplug and plug the wireless adapter. A solution for this have been asked for in various forum topics on Ubuntu forums and also askubuntu. However the best solution for this is to re-plug the wireless adapter for the mouse. This fixes the mouse wheel speed until the next reboot. My question is, what can be done to make this permanent? Can a shell script be written, or firstly what can be causing this? If you could give me some ideas on why this problem is occurring I would happily write a shell script for it... (I am thinking if this is fixed by a simple re-plug of the adapter, maybe a shell script to disable device and re-enable it or something like that... could do the trick) I appreciate any discussions and ideas on the subjects. Here are some already discussed topics on the same subject that I've researched: Mouse wheel jumpy on scrolling Mouse wheel scrolling too fast There's a lot more than that on the net, all of them ends with re-plug solution.

  Read the article

• Why not have a High Level Language based OS? Are Low Level Languages more efficient?

  - by rtindru

  Without being presumptuous, I would like you to consider the possibility of this. Most OS today are based on pretty low level languages (mainly C/C++) Even the new ones such as Android uses JNI & underlying implementation is in C In fact, (this is a personal observation) many programs written in C run a lot faster than their high level counterparts (eg: Transmission (a bittorrent client on Ubuntu) is a whole lot faster than Vuze(Java) or Deluge(Python)). Even python compilers are written in C, although PyPy is an exception. So is there a particular reason for this? Why is it that all our so called "High Level Languages" with the great "OOP" concepts can't be used in making a solid OS? So I have 2 questions basically. Why are applications written in low level languages more efficient than their HLL counterparts? Do low level languages perform better for the simple reason that they are low level and are translated to machine code easier? Why do we not have a full fledged OS based entirely on a High Level Language?

  Read the article

< Previous Page | 702 703 704 705 706 707 708 709 710 711 712 713  | Next Page >