Search Results

Search found 32538 results on 1302 pages for 'restore database'.

Page 708/1302 | < Previous Page | 704 705 706 707 708 709 710 711 712 713 714 715  | Next Page >

• External Storage for 2TB of backups and 4TB of data RAID level? HW vs Software?

  - by Jerry Mayers

  I have a Mac Mini set up as a media center/file server. Currently I just have a hodgepodge mess of external drives for storage. I'm maxed out, and I have some new laptops on the way with much larger drives and I need to work out a good storage solution for backing them up, as well as storing media on the server. I need around 2 TB of storage for the time machine backups from my various systems and around 2 TB more for media. I would like to build this to handle around 6 TB total so I have some growing room. Since I'm using a Mac Mini as the server I need to use external enclosure(s) that support USB 2 or Firewire 800 (preferred) or gigabit Ethernet. Performance of the system isn't a huge concern since the majority of the access from other computers is done over 802.11N. I plan on using 2TB drives, for the final version, but initially I'll try and use my existing 2 (1TB) drives + some new 2TB drives, and swap the 1TB ones out as I fill up. As to the actual questions: Should I use hardware RAID in some enclosure? Because if the enclosure dies I have to find an identical one to get to my data right? Wouldn't a software RAID be better as I can use any method of connecting the drives to the system? Remember OS X server is my OS. What if I had to reinstall OS X, can I restore the software RAID easily? What RAID version should I use? For the 2TB used for the time machine disk I don't see why I need RAID here, just a single 2TB drive since its already the backup, but for the remaining 4TB it would be the only copy of the data so I should build some redundancy. I had a RAID 5 setup using a cheep RAID PCI card years ago running RAID 5 in a 2 TB array and when a drive died it wanted 48 hours to rebuild. Is this crazy slow for a setup of this size or is this to be expected? Any suggestions as to drive enclosures?

  Read the article

• VirtualBox how to merge arbitrary snapshot into base vdi

  - by jmathew

  I botched a transfer of a VM from one harddisk to the other. Now I'm left with the base vdi and a whole bunch of snapshots. My steps Copied old VM directory over to new HDD Deleted old VM and added new VM using using Machine-add and providing the old XML file Couldn't add base vdi file due to conflict so changed the UUID of base vdi with VBOXMANGE.EXE internalcommands sethduuid Attempt to rollback to a snapshot, but it seems the VM is looking for the snapshots on the old HDD (which is formatted and gone) This is the error (networked is the name): Failed to restore the snapshot networked of the virtual machine lfs. Could not open the medium 'H:\vm\ft.vdi'. VD: error VERR_PATH_NOT_FOUND opening image file 'H:\vm\ft.vdi' (VERR_PATH_NOT_FOUND). Result Code: E_FAIL (0x80004005) Component: Medium Interface: IMedium {53f9cc0c-e0fd-40a5-a404-a7a5272082cd} The old HDD was drive H: the new one is drive N: How can I modify the snapshots/VM to look in N:\vm\ft.vdi for the base vdi? I've already set the default settings in VirtualBox in general (default vm/vm snapshot location). Or if not that how can I merge the old snap shot with the base vdi given that the only things that have changed is the base vdi's UUID? Thanks

  Read the article

• How to connect to DB2 when the password ends with '!' in Windows

  - by AngocA

  I am facing a problem to use the DB2 tools when using generic account with a generated password which ends with the Bang sign '!' to connect to DB2 database. I am not allowed to change the password because it is already used by other processes. I know the user is valid and I can connect to the database with its credentials, but not from all db2 tools. When using the Control Center it is okay. When using the Command Editor (GUI) or the Command Windows, I got this error message: connect to WAREHOUS user administrator using ! SQL0104N An unexpected token "!" was found following "<identifier>". Expected tokens may include: "NEW". SQLSTATE=42601 Let's say that my password is: pass@! I am trying to use c:\>db2 connect to sample user administrator using "pass@!" or c:\>db2 connect to sample user administrator using pass@! And it both cases I got the same error message. I could change the way I connect but it is not useful for me, for example: c:\>db2 connect to sample user administrator Enter current password for administrator: But I cannot use it from a batch file easily. I would like to know how can I connect from the Command Editor, in order to use this user from the Graphical Tools. BTW, I know that the Control Center is deprecated.

  Read the article

• “NT AUTHORITY\ANONYMOUS LOGON” error in Windows 7 (ASP.NET & Web Service)

  - by Tony_Henrich

  I have an asp.net web app which works fine in Windows XP machine in a domain. I am porting it to a Windows 7 stand alone machine. The app uses a web service which makes a call to sql server. The web server (IIS 7.5) and SQL Server are on the same stand alone machine. I enabled Windows authentication for the website and web service. The web service uses a trusted connection connection string. The web service credentials uses System.Net.CredentialCache.DefaultCredentials. I noticed username, password and domainname are blank after the call! The webservice and web site use the 'Classic .NET AppPool' with NetworkServices identity. I am getting an exception "NT AUTHORITY\ANONYMOUS LOGON" in the database call in the web service. I am assuming it's related to the blank credentials. I am expecting ASPNET user to be the security token to the database. Why is this not happening? Did I miss a setting? (Usually this happens when sql server and web server are on two different machines in a domain, delegation & double hopping, but in my case everything is on a dev box)

  Read the article

• dell latitude XT touch screen issue

  - by Jake

  yesterday I installed windows 7 ultimate after I had the enterprise version on this machine for a few months. the installation went smoothly and everything worked fine except for the finger detection of the screen(only the pen worked) and the bottom screen buttons for rotating and so. so I started to install all the missing drivers dell recommends for this model on their site, but once I tried to install N-Trig degitizer driver the installation said it was unsuccessful and since then the touch stopped working completely! I tried system restore but it didn't help so I went on and formatted the harddisk completely once again and installed windows but that didn't work either. I tried to install the N-Trig's driver but it was alarting for a fatal error and said that no device was detected. same story with N-Trig rollback. so I checked the device manager and saw an "unknown device" with VID and PID values set as 0000. I figured the N-Trig driver might have messed with the device firmware or something and now it doesnt know it's ID and munufactor... Is there anything that can be done? like forcing the N-Trig driver to install on this device or something? please help!

  Read the article

• Discover the public ip of a network without being connected

  - by Martin Trigaux

  Let say, I'm next to a network and can see the traffic (with airodump or similar tool) but can not decipher it (because I am not connected on the network). Is it possible to discover the public ip address of the network ? I know the MAC address of the users connected on the network but do I know the one of the router ? If yes, maybe there is a way to do the matching. I know IP addresses are not forever but some addresses are static and never change. Maybe there is a database of MAC address having recorded that. Google has a database that match MAC address and geographical coordinates so why not with IP addresses ? Other idea, if I know where am I, I can maybe guess the IP range used in the city by the ISP (is it findable ?) and then try to "ping" each IP on the range (if it is a /24, it's possible, even /16 maybe). Will I get some information like the MAC of the box or see some traffic on the network ? These are two ideas I had. I don't know if they are doable, certainly not perfect. Do you think of some others ? By trying several methods, maybe I can get a guess with a bit of luck. Thank you

  Read the article

• Azure Virtual Machines - what fault tolerance do they provide?

  - by Borek

  We are thinking about moving our virtual machines (Hyper-V VHDs) to Windows Azure but I haven't found much about what kind of fault tolerance that infrastructure provides. When I run VHD in Azure, I've got two questions: Is my VHD and all the data in it safe? I think that uploaded VHDs use the "Storage" infrastructure so they should be automatically replicated to multiple disks and geographically distributed but should I still make a full-image backup just to be safe? (Note that of course I will be backing up the actual data inside VMs that I care about; I just want to know if there is a chance greater than 0.0000001% that one day I will receive an email from Microsoft telling me that my VM is gone and that I should create or restore it from scratch). Do I need to worry about other things regarding the availability of my VMs? I mean, when I have an on-premise server I need to worry about the hardware itself, about the host operating system, what would happen if my router failed, if my Hyper-V's C: drive failed etc. Am I right in thinking that with Azure, their infrastructure takes care of all of this? Thanks.

  Read the article

• Amazon EC2: Instances, IPs and a wordpress blog (LAMP)

  - by JustinXXVII

  I had a link to my blog posted on Reddit yesterday and MySQL crashed on my EC2 Micro instance. I know I didn't have that many visitors because I used a marketing link that tracks hits. The link got 167 hits over the course of the last 18 hours, and MySQL crashed twice. So anyway, 167 visits is not a lot, so I've done some short term optimizations like restricting the number of Apache threads to limit the MySQL calls. I also set up WP Super Cache to serve static content. Soon I'm going to offload all of my images to S3 or CloudFront. So this leads me to my question. If this doesn't seem to help, and if i have another traffic "spike", how do AMIs work when you have a MySQL database? I think I understand that if you have more than one instance and assign the same Elastic IP to both of them, the incoming traffic gets distributed among both. But what happens when the MySQL database gets updated on one of the instances? I just need to wrap my mind around what happens when I create an AMI and then launch a new instance to help with traffic. Thanks for your suggestions.

  Read the article

• Create image (EBS AMI) takes forever - possibly caused MySQL Server to break?

  - by fuzzybee

  I'm trying to create an EBS AMI from my running EC2 instance to reuse my LAMP fully configured (for my needs). I got my website up and running yesterday on this EC2 instance my MySQL was working fine until this morning (it's not that difficult to install LAMP thanks to yum so I can't see how I could go wrong with this; having said that, it's always difficult for one to realise his own errors) I have seen "Loading, please wait ..." for a few hours now. How do I know whether this is completed or its progress? Shortly after I tried to create the AMI image from my EC2 instance, I encountered database connection error can't connect to local mysql server through socket '/var/lib/mysql/mysql.sock' I was able to restart mysqld at first. But database connection was down again. This time, I could not restart mysqld anymore. It shows MySQL Daemon failed to start. Could my attempt to create the AMI by any chance cause the MySQL server to reboot or corrupt? I did a lot of searched and have done the following although I think I shouldn't have to do any workaround for MySQL server to work here chown -R mysql.mysql /var/lib/mysql/ I also found this workaround but I'm very reluctant to follow due to my belief and the fact I would need to understand this problem first. Any help would be greatly appreciated. Getting back to searching for a solution for the MySQL server problem ... Thanks, Eric

  Read the article

• Power Outage Interrupted Upgrade from Windows Vista Ultimate to 7 Ultimate, Reverted to Vista, Now Vista is failing... What Next?

  - by tednewk

  I was in the midst of what seemed to be a successful upgrade from Vista Ultimate to 7 Ultimate when there was a brief blackout. The upgrade failed and Windows reverted back to Vista. Now Vista is very slow to boot, has problems waking back-up from inactivity and quickly loses it's wireless connection. The wake-up problem manifests itself as the mouse is clearly shown on a black screen but I have no access to the Desktop or Taskbar or Explorer. Even Alt-Ctrl-Delete doesn't seem to work. No task menu, no reboot. Hitting the reset button reboots the machine with the usual Black Screen warnings offering Safe Mode. I tried to do a system restore to a point before the upgrade. That didn't seem to work. My guess is that my system is a mutant with parts of Vista and parts of 7 crashing each other. I would like avoid a clean install if at all possible to avoid reinstalling other software. What should I try now? My thoughts are: My a system back-up to lock the computer in place Trying a second 7 upgrade If that appears to be working make another back-up If not reload back-up and try a repairing Vista from DVD. If that appears to work make another back-up, let system stablize about a week then try 7 install again If that doesn't work are there any other options to try before settling for a clean install? Another complication, I am doing this by "remote control". I'm traveling with my job and I'll be talking my son through it over the phone. (Kind of like the landing the 747 cliche from all the 70's adventure shows!) So is there a way of simplifying the steps? Thanks Ted

  Read the article

• Windows 7 System File Checker (sfc) not working

  - by Andrew

  I have a strange problem with Windows 7 RTM. I'm running Ultimate 64-bit edition. Whenever I run sfc /scannow I get this error: Windows Resource Protection could not start the repair service. My research so far has told me that I need to set the Windows Module Installer and Windows Installer services' startup types to Manual. They already were, so I manually started those services and tried again. No luck. I've even booted into my Windows 7 repair disc and tried running sfc /scannow from that. All I get is this: A repair operation is already pending. Restart and try again. History: I'm trying to run sfc because I am unable to open any images in Windows Photo Viewer. Whenever I try, I get the error "Class not registered." I believe the problem started after I installed Gladinet, but I can't be sure. I've uninstalled Gladinet, but the problem remains. System Restore was disabled (yes, I know I'm stupid - you don't have to remind me). Please help. Thanks.

  Read the article

• User permissions linux. (proftpd / nginx)

  - by user55745

  I've been having a complete nightmare trying to configure proftpd. I've got proftp server working with an sql database. However I want to have any files uploaded able to viewed by the webserver running on the same box. The folders get created in /var/tmp/ as rwx------ 2 ftpuser ftpgroup 4096 Oct 8 20:35 50730c4346512 drwx------ 2 ftpuser ftpgroup 4096 Oct 8 20:38 50730f3a811ca I've tried adding www-data to group with the following usermod -g www-data ftpuser But this doesn't allow the web server access. In proftpd.conf I have the following umask set Umask 0022 It doesn't seem to make a difference what I set that value to. /etc/group (sure I've messed up one of these two but I'm getting desperate) ftpgroup:x:2001:www-data www-data:x:33:ftpgroup /etc/passwd www-data:x:33:33:www-data:/var/www:/bin/sh proftpd:x:108:65534::/var/run/proftpd:/bin/false ftp:x:109:65534::/srv/ftp:/bin/false ftpuser:x:2001:33:proftpd user www-data:/bin/null:/bin/false The ftpuser table in the database has uid / gid set to 2oo1 for both. I'm going absolutely crazy trying to solve this any help would be greatly appreciated. p.s Also, although if I manually connect to the ftp server I can upload files via FileZilla. Although this isn't working for the web-camera, although there is talky talky going on between the server and the camera.

  Read the article

• W7-pro indexing mydoc on disk partition does not work

  - by Yvan Thery

  I am working on a HP-7100 mini tower running W7 Pro 64bits. My Local HD includes C:/ + 2 disk partitions : all my documents are located on disk partition L:/ and all my media files are on disk partition M:/ The indexing process works well on C:/ and M:/ but does not index the L:/ any more also all of them are allowed to be indexed, also the system is present on all drive security tabs. I have tested to rebuilt the indexing file with a new setting including few directories present on drive C/M/L but still with L: does not work ! One more thing I can tell you is that even after rebuilding the indexing file, I can find some residual directories or files which are out of the test selection. It is like unerased components remaining in the indexing database. As I do not know precisely how the indexing process works it is hard to know what to do ... Recently I had a bad time after using a past restoration procedure ... maybe it did corrupt the indexing file ???? If I start indexing the all L:/ disk partition the system stop at 39 found index also many more are existing .... Does any one from you guys could advise the process to create a new indexing database ... ? Any idea to get out of this mess ? Many thanks for assistance Yvan

  Read the article

• Does migrating 2 domain controllers between 2 datacentre requires both virtual machines to be shut down at the same time?

  - by Imagineer

  I was attempting to migrate 2 virtual machines that are domain controllers between 2 datacentres running ESX 3.5 and ESX 4.1. I was advised to shut down both domain controller at the same time during the migration process. This is to avoid USN Rollback and other replication issues. The following are the steps that I was planning to perform: 1. Shutdown both DC. 2. Copy both VMs files across to new datacentre using Veeam FastSCP (connection to both vCentre through IP address instead of hostname) 3. Power them up at new datacentre. 4. Configure Network interface/DNS/DHCP for both DCs in new datacentre I have tried to use Veeam FastSCP rather than VMware Standalone Converter is because its copying rather than converting. Someone also suggested that I use backup and restore app like Veeam backup and replication software. Sounds like a simple job, but after shutting down both DCs, the transfer rate using FastSCP is so slow registering only 1KB/s as oppose to the normal 1MB/s (or more). When that attempt to transfer failed, I tried to cold clone both DCs resulted in the both ESX hosts get disconnected. I have tried troubleshooting by referring to this - VMware KB - Diagnosing an ESX Server that is Disconnected or Not Responding in VirtualCenter It seems that the DNS being down is the caused of all unusual occurrence. The moment I powered up the DCs via VMware console command, the ESX host were able to connect to the vCentre again. How can I avoid such a pitfall again? Am I doing it correctly? Any help would be greatly appreciated! Thank you.

  Read the article

• High-performance Academic Server [closed]

  - by PHPsmith

  Suppose I want to build a server for the university's academic interests. The server is dedicated only to a site, where users (students and lecturers) just view and fill the academic data. But at a time (e.g. once a semester), about 12,000 students will access the site simultaneously. Due to limitation of resources, I have to build the server using free software (except for the operating system Windows 7, the university has been prepared). The hardware is also limited to the usual 4-core computers (eg, Ivy Bridge Intel Core i7-3770) with approximately 16GB of memory (DDR3 1600 MHz), equipped with an RJ-45 port (Intel 82 579 Gigabit Ethernet). With all these limitations, I have to choose the software (web server, database, etc) are appropriate for this purpose is achieved. I decided to create a site in PHP. Please help me by answering the following questions based on your expertise. (my prime candidate software to consider after googling) Web server which is faster & stable & secure, when implemented and optimized for PHP? And why? (nginx) PHP accelerator which is faster & stable & compatible with the selected web server? And why? (APC with Zend Optimizer+) Database which is faster & stable & secure, when implemented and optimized for selected web server and selected PHP accelerator? (MySQL) Are there any errors that have been or will be happening from my condition is? If there is, please enlighten me? Is there anything else I need to know in order to achieve this goal? If there is, please enlighten me? I understand that the performance also depends on the implementation of source-code program, so I assume it will create a site with the best efficiency (e.g. using AJAX).

  Read the article

• sharepoint crawl not indexing main site

  - by user22215

  Guys I'm having some strange search issues' going on with my main portal application. First off let me give you a little back ground on the problem web app. Our Sharepoint environment was originally set up by a consultant that did not follow best practices. She used one web app to house our companies' intranet site, ssp, and mysites. Since than I have provisioned a new ssp that I have segmented correctly I moved all of our other sites over to the new ssp with out any problems . However, I could not assign the main portal app to the new ssp since the portal app housed the ssp site collection. So I deleted the ssp site collection after that I deleted the ssp and assigned the portal app to my new ssp. Now this is where the problem starts when I attempt to crawl this application the crawl starts than stops 5 seconds later with a status of success also it reports that 1 item was successfully crawled. The funny thing is the main portal app has nearly 30000 items. I have tracked the problem down to the web app if I create a test web app than restore the content I have no problem crawling all 30000 items. Also all of my other web apps that use the same ssp have no problem completing crawls. I don't see anything in the ULS logs or server 2003's event viewer. Also I'm using a separate dedicated index server that's configured to crawl itself via host file configuration. I would like to fix this problem with out having to recreate our main portal site due to the fact that we have several custom code modifications where DLL's were registered to the IIS bin folder also I don't even want to get into the Silverlight mods that were done. Any help with this problem is much appreciated Same problem as minehttp://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/MS-SharePoint/Q_23885820.html

  Read the article

• SQL Server Subscriber Migration

  - by SuperCoolMoss

  We're currently have one way transaction replication from a SQL Server 2005 OLTP publisher/distrbituor to two subscribers (one SQL 2005 and the other SQL2008 R2). Replication security is via the SQL Agents' domain service account (the same account is used on all boxes). The SQL2008R2 subscriber is used for BI purposes and hosts a database that has a subset of the Production publisher database tables, with different security and indexes. We need to migrate this BI subscriber to a newer box with more performant hardware. The plan is as follows: Stop replicating to the BI box (continue replicating to the other subscriber). Backup all databases on the BI box (including system databases). Restore all databases (including master in single user mode) to the new BI box (this has SQL Server 2008R2 already installed). Take the old BI box off the network and shut it down. Rename and Re-IP the new BI box to be the same as the old box. Switch replication back on. Are there any flaws in this approach?

  Read the article

• Where did my backup files go? Can they be recovered?

  - by Ken

  I just purchased a Western Digital Essential SE 1TB external hard drive from Best Buy at their recommendation. I then exchanged it for a Toshiba Canvio (I think that was the name). I have a Toshiba Qosmio X505-Q898. The Canvio locked up my computer and rewrote some kind of OS file, and erased all the restore points as well as the system image backup (according to Best Buy) just by plugging it in for the first time. Never even got to the install part or anything -- plugged it in and fried my computer. They spent about an hour and a half on my computer and got it back to a somewhat working condition and gave me access to my files. So now they say I have to back it up using my recovery disk and rewriting my OS. Enter the Essential. Brought it home last night, plugged it in and installed everything. Works perfect, no problems. Backed up everything on it. I unplugged and plugged it twice to make sure that everything was on it. Essential told me it had both the HDD and SSD backed up. So I reinstalled my OS. Plugged the Essential in and everything loads right up. Went to retrieve my files and the Western Digital has nothing on it. It shows all my music, pics, ETC. as still being on my computer and needing to be backed up, but since there are no files on my computer now. Where is this information coming from and where did my files go? It's about 810GB worth of files I've amassed over several years. Is there any way to recover data from this? I plan to contact Western Digital and Best Buy, just thought I would check here too. Any advice will be appreciated as a lot of these files are invaluable to me.

  Read the article

• Can't Connect SQL server - process being used by another process. Conflict with IIS?

  - by shinya

  I'm having problem connecting to MS SQL Server (2012 Express) after accessing a database through IIS (web site). I can access the data through web site no problem, but I can't access the data from any other programs (i.e SSMS) until I reboot the SQL server. It seems that the connection stays open even if I close a browser. Here is error message I'm getting Unable to open the physical file "C:---------". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". Unable to open the physical file "C:-------". Operating system error 32: "32(The process cannot access the file because it is being used by another process.)". Cannot open user default database. Login failed. Login failed for user 'Myserver\myname'. (.Net SqlClient Data Provider) Server Name: MYPC\SQLEXPRESS Error Number: 5120 Severity: 16 State: 101 Line Number: 65536 I follow the help link and it told me to move TCP before named pipes in the protocol order list. I tried it but it didn't help at all. What is the proper settings on SQL server or IIS in order to release process after closing a browser. How do I avoid getting this error? Thank you for your help

  Read the article

• Master File Table Corrupt, any way to save data?

  - by domen

  hi. I've used search, but none of the results match my problem so I didn't have to ask separate question. I've Installed Windows 7 RTM recently and since then partitions located on one of my HDDs have gone "crazy". They used to "freeze" and didn't open in explorer for some time (minute or two, usually), sometimes all partitions of the drive wouldn't show until reboot and finally, one of those partitions started showing "disk structure is corrupted and unreadable" warning, it appeared in Disk Management window as RAW and chkdsk showed "mft corrupt". There were no important data on the partition and I didn't have enough time to analyze the problem at the moment, so I just reformatted it and ran antivirus scan on system. After that problem settled for some time, but yesterday the problematic HDD vanished again from the system. After reboot chkdsk identified mft of four partitions corrupt and now they are all in same conditions as the above mentioned one. But the difference is that the files stored in them are extremely important. and just for info: I upgraded from Win7 build 7077, but had some performance issues, so I reformatted system drive and installed fresh Win7 RTM on it. I've downloaded TestDisk and it shows all the partitions marked as NTFS (not RAW) and my knowledge of the program wasn't sufficient to obtain any other info from it :-) and the images that could help describe the problem (sorry, I'm not allowed to post images and more than one hyperlink): http:// img22.imageshack.us/img22/5909/chkdskz.jpg http:// img198.imageshack.us/img198/5576/computeray.jpg I'm interested, is there a way to let me restore the MFT or just access files so I can backup them before reformatting the drive. Thanks for your time. :) P.S. my reformatted drive is showing no problems, could there be a problem with windows 7 itself? I googled, but with no results.

  Read the article

• Fixing damaged partition table

  - by dr4cul4

  This is continuation of Recover Extended Partition , but this time I have different problem related partition table it self. I managed to restore partition that I needed and backed up files that were crucial to me (at least those that I had space to store somewhere) OK now get to the problem. My partition table is corrupted, booting RIP Linux I can mount it in truecrypt (and other ones that recovered), but that's basically it. When I launch GParted I have unallocated drive. GParted Dev info: Device Information Model: ATA ST2000DL003-9VT1 Size: 1.82TiB Path: /dev/sda Partition table: unrecognized Heads: 255 Sectors/track: 63 Cylinders: 243201 Total Sectors: 3907029168 Sector size: 512 When I check information on unallocated space I get: File system: unallocated Size: 1.82TiB First sector: 0 Last sector: 3907029167 Total sectors: 3907029168 Warning: Can't have a partition outside the disk! Now the output of testdisc (Analyze): TestDisk 6.13, Data Recovery Utility, November 2011 Christophe GRENIER <[email protected]> http://www.cgsecurity.org Disk /dev/sda - 2000 GB / 1863 GiB - CHS 243201 255 63 Current partition structure: Partition Start End Size in sectors > 1 P Linux 13132 242 39 16353 233 8 51744768 2 E extended LBA 16807 223 1 243201 254 63 3637021626 No partition is bootable 5 L Linux 16807 223 57 20430 39 25 58191872 X extended 20430 70 1 243201 78 13 3578816632 Invalid NTFS or EXFAT boot 6 L HPFS - NTFS 20430 71 58 243201 78 13 3578816512 6 LNext Now fdisk: # fdisk -l /dev/sda Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00039cd0 Device Boot Start End Blocks Id System /dev/sda1 210980864 262725631 25872384 83 Linux /dev/sda2 270018504 3907040129 1818510813 f W95 Ext'd (LBA) /dev/sda5 270018560 328210431 29095936 83 Linux /dev/sda6 328212480 3907028991 1789408256 7 HPFS/NTFS/exFAT Now I would like to fix that to arrange partitions correctly, but I have no idea which tool is capable of fixing that (tried, a few, some of them offered fixing, but it was to risky at the moment - still backing up data).

  Read the article

• My yum repository able to search packages, but not able to install it in RHEL?

  - by mandy

  I set up yum from dvd. Following is the containts of my .repo file: [dvd] name=Red Hat Enterprise Linux Installation DVD baseurl=file:///media/dvd enabled=0. I'm able to search packages. However while installation I'm getting below error: [root@localhost dvd]# yum install libstdc++.x86_64 Loaded plugins: rhnplugin, security This system is not registered with RHN. RHN support will be disabled. Setting up Install Process Nothing to do My Yum Search output: [root@localhost dvd]# yum search gcc Loaded plugins: rhnplugin, security This system is not registered with RHN. RHN support will be disabled. ============================================================================= Matched: gcc ============================================================================= compat-libgcc-296.i386 : Compatibility 2.96-RH libgcc library compat-libstdc++-296.i386 : Compatibility 2.96-RH standard C++ libraries compat-libstdc++-33.i386 : Compatibility standard C++ libraries compat-libstdc++-33.x86_64 : Compatibility standard C++ libraries cpp.x86_64 : The C Preprocessor. libgcc.i386 : GCC version 4.1 shared support library libgcc.x86_64 : GCC version 4.1 shared support library libgcj.i386 : Java runtime library for gcc libgcj.x86_64 : Java runtime library for gcc libstdc++.i386 : GNU Standard C++ Library libstdc++.x86_64 : GNU Standard C++ Library libtermcap.i386 : A basic system library for accessing the termcap database. libtermcap.x86_64 : A basic system library for accessing the termcap database. Please guide me on this, I want to install gcc on my RHEL.

  Read the article

• How can I stop Excel from eating my delicious CSV files and excreting useless data?

  - by atroon

  I have a database which tracks sales of widgets by serial number. Users enter purchaser data and quantity, and scan each widget into a custom client program. They then finalize the order. This all works flawlessly. Some customers want an Excel-compatible spreadsheet of the widgets they have purchased. We generate this with a PHP script which queries the database and outputs the result as a CSV with the store name and associated data. This works perfectly well too. When opened in a text editor such as Notepad or vi, the file looks like this: "Account Number","Store Name","S1","S2","S3","Widget Type","Date" "4173","SpeedyCorp","268435459705526269","","268435459705526269","848 Model Widget","2011-01-17" As you can see, the serial numbers are present (in this case twice, not all secondary serials are the same) and are long strings of numbers. When this file is opened in Excel, the result becomes: Account Number Store Name S1 S2 S3 Widget Type Date 4173 SpeedyCorp 2.68435E+17 2.68435E+17 848 Model Widget 2011-01-17 As you may have observed, the serial numbers are enclosed by double quotes. Excel does not seem to respect text qualifiers in .csv files. When importing these files into Access, we have zero difficulty. When opening them as text, no trouble at all. But Excel, without fail, converts these files into useless garbage. Trying to instruct end users in the art of opening a CSV file with a non-default application is becoming, shall we say, tiresome. Is there hope? Is there a setting I've been unable to find? This seems to be the case with Excel 2003, 2007, and 2010.

  Read the article

• Backup Picasa 'people' tags data

  - by pelms

  OK, so I've spent a fair amount of time putting names to faces in Picasa 3.5 but in a few days (hopefully) my copy of Windows 7 should arrive and I'll need to reinstall Windows. So, does anyone know what I need to backup so that I don't have to re-enter all those name tags? N.B. I'm on Windows 7 RC and know that I don't have to do a clean reinstall but I would prefer to. Outcome: I clean installed Windows 7 and downloaded and installed Picasa. Unfortunately, the download link on the UK Picasa homepage still pointed to Picasa 3.0 (rather than 3.5) which doesn't have face recognition. This scanned my photos folders and overwrote the picasa.ini files along with the people information   :¬( Fortunately I'd backed up the photos before installing Win 7, so after uninstalling Picasa 3.0 (along with it's database), restoring the photos from backup and installing Picasa 3.5, I finally got my face names back. Extra... Google has now posted advice on how to migrate to Windows 7 and keep your Picasa database, meaning that it will not need to rescan you photos and will retain all information about then including name tags. They have a method for upgrading and for a clean install of Win 7. Basically you need to back up: "C:\Users\%username%\AppData\Local\Google\Picasa2" and "C:\Users\%username%\AppData\Local\Google\Picasa2Albums"

  Read the article

• Backing up a Windos 7 partition from Macbook with no OS X

  - by mattcodes

  I have a 3 year macbook with Windows 7 installed as 40gb and OS X as 40gb (80gb HD). I want to remove OS X as Im at the limit of 40gb on Windows and I have not logged on to Mac OS X since installed Win7 (dont flame me). So I want to delete OS X partition and expand my win partition to 80gb BUT I still would like to be able to regularly (once a week/month) backup my Windows 7 partition - its took a while to setup everything up right - not just docs and programs - so when the hard drive dies I want to be able to restore the partition and boot away, (the daily volatile bits I can pull down from dropbox and project from soure control). With Mac OS X I could use Winclone - and this worked flawless last time the HD failed with XP but with the absence of OS X I will need something else. Im thinking can I use a Linux Live boot CD along with an external USB hard drive. Boot from CD and then dd? the partition to the USB? What linux distro live CD should I use? I say dd as if I know what am taking about (I dont) is this the best way to backup a partition (when it will be restored to same hardware as bootable) ? What command?

  Read the article

< Previous Page | 704 705 706 707 708 709 710 711 712 713 714 715  | Next Page >