Search Results

Search found 10931 results on 438 pages for 'dynamic dns'.

Page 71/438 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

• Did my registrar screw up or is this how name server propagation works?

  - by Brad

  So my company has a number of domains with a large registrar that shall go unnamed. We are making some changes to our DNS infrastructure and the first of those is we are moving our secondary DNS from one server on site to four servers offsite. So we updated the name servers for each domain at the registrar by removing the entry for the old secondary name server and adding the four new ones. I monitored the old secondary server for requests and when I saw no new requests had been made for 24 hours I shut it down. That was this morning. I assumed at this point everything was good. Unfortunately this was my mistake. I should have gone and made sure name servers at large were returning the correct NS records. So this afternoon we were performing maintenance on our primary DNS server and we shut it down. This is when I started getting alerts from our external monitoring. I checked and sure enough, the DNS server used there reported the only NS record for our primary domain was the primary name server. The new secondary servers were not listed and neither was the old secondary. Is it unreasonable of me to have assumed that because the update was from ns1.mydomain.com ns2.mydomain.com to ns1.mydomain.com ns1.backupdns.com ns2.backupdns.com ns3.backupdns.com ns4.backupdns.com in one step at the registrar that there should be no intermediate state where the only NS record was for ns1.mydomain.com? Going forward to be safe obviously I will always leave the old name servers alone until after I'm 100% sure the new ones have propagated and only then remove the old name servers from the registrar. However, I'd still like to know if my registrar screwed up or if my expectation was unreasonable.

  Read the article

• Cannot make bind9 forward DNS query to subdomain unless recursive enabled

  - by PP.

  I am trying to develop my own dynamic DNS. I'm running my own custom DNS for the subdomain on port 5353. ASCII diagram: INET --->:53 Bind 9 --->:5353 node.js | V zone_files I have example.com. The node.js DNS is for dyn.example.com. In my /etc/bind/named.conf.local I have: zone "example.com" { type master; file "/etc/bind/db.com.example"; allow-transfer { zonetxfrsafe; }; }; zone "dyn.example.com" IN { # DYNAMIC type forward; forwarders { 127.0.0.1 port 5353; }; forward only; }; I've even gone so far as to add a NS in my example.com zone file: $TTL 86400 @ IN SOA ns.example.com. hostmaster.example.com. ( 2013070104 ; Serial 7200 ; Refresh 1200 ; Retry 2419200 ; Expire 86400 ) ; Negative Cache TTL ; NS ns ; inet of our nameserver ns A 1.2.3.4 ; NS record for subdomain dyn NS ns When I attempt to get a record from the subdomain server it doesn't get forwarded: dig @127.0.0.1 test.dyn.example.com However if I turn recursive on in /etc/bind/named.conf.options: options { recursion yes; } .. then I CAN see the request going to the subdomain server. But I don't want recursion yes; in my Bind configuration as it is poor security practice (and allows all-and-sundry requests that are not related to my managed zones). How does one forward (proxy) zone queries for just one zone? Or do I give up on Bind altogether and find a DNS server that can actually forward specific queries?

  Read the article

• Power Dynamic Database-Driven Websites with MySQL & PHP

  - by Antoinette O'Sullivan

  Join major names among MySQL customers by learning to power dynamic database-driven websites with MySQL & PHP. With the MySQL and PHP: Developing Dynamic Web Applications course, in 4 days, you learn how to develop applications in PHP and how to use MySQL efficiently for those applications! Through a hands-on approach, this instructor-led course helps you improve your PHP skills and combine them with time-proven database management techniques to create best-of-breed web applications that are efficient, solid and secure. You can currently take this course as a: Live Virtual Class (LVC): There are a number events on the schedule to suit different timezones in January 2013 and March 2013. With an LVC, you get to follow this live instructor-led class from your own desk - so no travel expense or inconvenience. In-Class Event: Travel to an education center to attend this class. Here are some events already on the scheduled:  Where  When  Delivery Language  Lisbon, Portugal  15 April 2013  European Portugese  Porto, Portugal 15 April 2013   European Portugese  Barcelona, Spain 28 February 2013  Spanish  Madrid, Spain 4 March 2013   Spanish If you do not see an event that suits you, register your interest in an additional date/location/delivery language. If you want more indepth knowledge on developing with MySQL and PHP, consider the MySQL for Developers course. For full details on these and all courses on the authentic MySQL curriculum, go to http://oracle.com/education/mysql.

  Read the article

• Coarse Collision Detection in highly dynamic environment

  - by Millianz

  I'm currently working a 3D space game with A LOT of dynamic objects that are all moving (there is pretty much no static environment). I have the collision detection and resolution working just fine, but I am now trying to optimize the collision detection (which is currently O(N^2) -- linear search). I thought about multiple options, a bounding volume hierarchy, a Binary Spatial Partitioning tree, an Octree or a Grid. I however need some help with deciding what's best for my situation. A grid seems unfeasible simply due to the space requirements and cache coherence problems. Since everything is so dynamic however, it seems to be that trees aren't ideal either, since they would have to be completely rebuilt every frame. I must admit I never implemented a physics engine that required spatial partitioning, do I indeed need to rebuild the tree every frame (assuming that everything is constantly moving) or can I update the trees after integrating? Advice is much appreciated - to give some more background: You're flying a space ship in an asteroid field, and there are lots and lots of asteroids and some enemy ships, all of which shoot bullets. EDIT: I came across the "Sweep an Prune" algorithm, which seems like the right thing for my purposes. It appears like the right mixture of fast building of the data structures involved and detailed enough partitioning. This is the best resource I can find: http://www.codercorner.com/SAP.pdf If anyone has any suggestions whether or not I'm going in the right direction, please let me know.

  Read the article

• How-to get the binding for a tab in the Dynamic Tab Shell Template

  - by Frank Nimphius

  The Dynamic Tab Shell template does expose a method on the Tab.java class that allows you to get access to the ADF binding container for a tab. At least in theory this works, because in practice this call always returns a null value (a bug is filed for this). To work around the problem, you can use code similar to the following to get the ADF binding for a specific tab DCBindingContainer currentBinding = (DCBindingContainer) BindingContext.getCurrent().getCurrentBindingsEntry(); DCBindingContainer templateBinding = (DCBindingContainer)currentBinding.get("ptb1"); DCBindingContainer tabBinding= (DCBindingContainer)templateBinding.get("r"+0);  In the code line above, the tabBinding variable will hold the binding reference to the first tab in the dynamic tab shell template. Note that the tab doesn't need to be visible for this (which has to do with how the template works).  "ptb1" is the template reference name in the PageDef file (Executable section) of the template consumer view. Check this string in your page before using this code. If it differs, change it also in the code above. "r0" is the binding reference of the first tab in the template. Te last tab is referenced by "r14".  

  Read the article

• Dynamic Monitoring Service (DMS) Configuration Dumping and CPU Utilization

  - by ShawnBailey

  There was recently a report of CPU spikes on a system that were occuring at precise 3 hour intervals. Research revealed that the spikes were the result of the Dynamic Monitoring Service generating a metrics dump and writing it under the server 'logs' folder for every WLS server in the domain. This blog provides some information on what this is for and how to control it. The Dynamic Monitoring Service is a facility in FMw (JRF to be more precise) that collects runtime data on the components deployed to WebLogic. Each component is responsible for how much or how little they use the service and SOA collects a fair amount of information. To view what is collected on any running server you can use the following URL, http://host:port/dms/Spy and login with admin credentials. DMS is essentially always running and collecting this information in the runtime and to protect against loss of this data it also runs automatic backups, by default at the 3 hour interval mentioned above. Most of the management options for DMS are exposed through WLST but these settings are not so we must open the dms_config.xml file which can be found in DOMAIN_HOME/config/fmwconfig/servers/<server_name>/dms_config.xml. The contents are fairly short and at the bottom you will find the following entry: <dumpConfiguration>     <dump intervalSeconds="10800" maxSizeMBytes="75" enabled="true"/> </dumpConfiguration> The interval of 10800 seconds corresponds to the 3 hours and the maximum size is 75MB. The file is written as an archive to DOMAIN_HOME/servers/<server_name>/logs/metrics. This archive contains the dump in XML format. You can disable the dumps all together by simply setting the 'enabled' value to 'false' or of course you could modify the other parameters to suit your needs. Disabling the dumps will NOT impact DMS collections or display at runtime. It will only eliminate these periodic backups.

  Read the article

• ViewBag dynamic in ASP.NET MVC 3 - RC 2

  - by hajan

  Earlier today Scott Guthrie announced the ASP.NET MVC 3 - Release Candidate 2. I installed the new version right after the announcement since I was eager to see the new features. Among other cool features included in this release candidate, there is a new ViewBag dynamic which can be used to pass data from Controllers to Views same as you use ViewData[] dictionary. What is great and nice about ViewBag (despite the name) is that its a dynamic type which means you can dynamically get/set values and add any number of additional fields without need of strongly-typed classes. In order to see the difference, please take a look at the following examples. Example - Using ViewData Controller public ActionResult Index() {     List<string> colors = new List<string>();     colors.Add("red");     colors.Add("green");     colors.Add("blue");                 ViewData["listColors"] = colors;     ViewData["dateNow"] = DateTime.Now;     ViewData["name"] = "Hajan";     ViewData["age"] = 25;     return View(); } View (ASPX View Engine) <p>     My name is     <b><%: ViewData["name"] %></b>,     <b><%: ViewData["age"] %></b> years old.     <br />         I like the following colors: </p> <ul id="colors"> <% foreach (var color in ViewData["listColors"] as List<string>){ %>     <li>        <font color="<%: color %>"><%: color %></font>    </li> <% } %> </ul> <p>     <%: ViewData["dateNow"] %> </p> (I know the code might look cleaner with Razor View engine, but it doesn’t matter right? ;) ) Example - Using ViewBag Controller public ActionResult Index() {     List<string> colors = new List<string>();     colors.Add("red");     colors.Add("green");     colors.Add("blue");     ViewBag.ListColors = colors; //colors is List     ViewBag.DateNow = DateTime.Now;     ViewBag.Name = "Hajan";     ViewBag.Age = 25;     return View(); } You see the difference? View (ASPX View Engine) <p>     My name is     <b><%: ViewBag.Name %></b>,     <b><%: ViewBag.Age %></b> years old.     <br />         I like the following colors: </p> <ul id="colors"> <% foreach (var color in ViewBag.ListColors) { %>     <li>         <font color="<%: color %>"><%: color %></font>     </li> <% } %> </ul> <p>     <%: ViewBag.DateNow %> </p> In my example now I don’t need to cast ViewBag.ListColors as List<string> since ViewBag is dynamic type! On the other hand the ViewData[“key”] is object.I would like to note that if you use ViewData["ListColors"] = colors; in your Controller, you can retrieve it in the View by using ViewBag.ListColors. And the result in both cases is Hope you like it! Regards, Hajan

  Read the article

• SOA Suite 11g Dynamic Payload Testing with soapUI Free Edition

  - by Greg Mally

  Overview Many web service developers use soapUI for various tests like: smoke test, unit test, and load testing because you can get a free edition that is fairly robust. However, if you need to venture into more complex testing that requires a dynamic payload, then the free edition doesn't necessarily make it easy. This feature does exist in soapUI, but for obvious reasons it is in the Pro version. In this blog I will show you how to use soapUI free edition for dynamic payloads in a simplified example. Hopefully this will open the doors for you to expand into more complex scenarios. The following assumes that you have a working knowledge of soapUI and will not go into concepts like setting up a project etc. For the basics, please review the documentation for soapUI: http://www.soapui.org/Getting-Started/. Additionally, we will be using asynchronous web services and you can review the setup for this in my blog: SOA Suite 11g Asynchronous Testing with soapUI. Features in soapUI Free Edition Relating to this Topic The soapUI test tool provides a very feature rich environment that can do many things provided you are willing to go beyond point and click. For this example, we will be leveraging just a couple features for our dynamic payload example: Test Case Properties Scripting with Groovy Basically, we will be using a property as a global variable and we will manipulate that property using a Groovy script. Setting Up Our Property Properties are available throughout soapUI and here is a snippet from the soapUI website defining the locations: Projects : for handling Project scope values, for example a subscription ID TestSuite : for handling TestSuite scoped values, can be seen as "arguments" to a TestSuite TestCases : for handling TestCase scoped values, can be seen as "arguments" to a TestCase Properties TestStep : for providing local values/state within a TestCase Local TestStep properties : several TestStep types maintain their own list of properties specific to their functionality : DataSource, DataSink, Run TestCase MockServices : for handling MockService scoped values/arguments MockResponses : for handling MockResponse scoped values Global Properties : for handling Global properties, optionally from an external source For our example, we will be defining a custom property in a TestCase called SimpleAsyncPayload. The property can be created in either the Custom Properties tab located at the bottom of the Navigator panel when the TestCase is selected in the Navigator or the Properties label in the TestCase editor: Navigator Panel TestCase Editor You will notice that I set a value of “0” for the custom property. For this simplified example, we will need to retrieve that value and manipulate it prior to making the web service request invocation. In order to accomplish this, we will need to get Groovy ;) Let's Get Groovy We will now add a new Groovy Script step to the TestCase called Manipulate Payload: TestCase Editor > Append Step > Groovy Script Once we have added the Groovy Script step to our TestCase, we can open the Groovy Script editor to add the code to: Get the current value of the property we created called SimpleAsyncPayload. Convert the value of the property to an integer. Increment the value. Store the incremented value back into the TestCase property called SimpleAsyncPayload. The script should look something like the following: Groovy Script Editor – Manipulate Payload At this point we can test the script to see if it is working by simply running the TestCase (left-click on the green triangle in the upper left-hand corner of the TestCase editor). To verify if it ran correctly, we can look at the value of the SimpleAsyncPayload property which should now be 1: TestCase Editor – Run Results All that is left to complete the TestCase is to append another step of type Test Request. The information required to append the request is a name and an operation to invoke. In this example we will use the default name and select the SimpleAsyncBPELProcessBingd -> process as the operation (any other information being requested, simply use the defaults unless you are calling an asynchronous operation then do not add any assertions). We are now in familiar ground with the Test Request editor. Depending upon the type of operation you are invoking (synchronous or asynchronous), please update the request with the necessary information (e.g., callback information for asynchronous operations). We will now tweak the Test Request payload to retrieve the value of the SimpleAsyncPayload property. The soapUI editor makes this very simple: right-click in the payload and navigate to the property (e.g., right-click > Get Data.. > TestCase: [Groovy TestCase] > Property [SimpleAsyncPayload]): Test Request Editor – Insert Property Value Your payload should now look something like the following: Test Request Editor – Inserted Property Value Just like before, we are now ready to run the TestCase. If everything goes as expected we should see a response like the following: Message Viewer – Results of TestCase Run We are now setup to be able to run a stress test where the payload will change for each request. This simple example can be expanded to include multiple payload values, complex calculations in the scripts, or whatever can be done via the soapUI scripting. Hopefully you have found this useful and happy testing to you :)

  Read the article

• james - mail server DNS configuration

  - by Chaitanya

  hi, I am setting up james mail server. I installed James and added in the config.xml added the servername as mydomain.com. In the DNS for mydomain.com, I have created a A-record, say mx.mydomain.com, which corresponds to the ipaddress of the above mail server machine. Then added mx.mydomain.com as MX record for mydomain.com. In James, I have created a new user test. From the user I have sent a mail to my gmail account. I see that the mail is accepted and the mail is in outgoing folder of James. But it's not relay to the gmail server. In the config.xml of James, I have added 8.8.8.8 and 8.8.4.4 as the dns server addresses, which are public DNS servers hosted by Google. IPTables on the machine is stopped. Thanks for your help!

  Read the article

• how to reference a ppp adapter in windows command?

  - by ollydbg23

  When using the windows command ipconfig /all, the result will show a PPP adapter followed by a long name closed with braces. It looks like the below image: When I try to set the DNS of my PPP adapter, I encounter this problem: netsh interface ip set dns "PPP adapter {1C43A7B0-1173-40E2-96D6-1DA6457786B0}" static 208.67.222.222 Invalid interface PPP adapter {1C43A7B0-1173-40E2-96D6-1DA6457786B0} specified. I have also used the pure string "{1C43A7B0-1173-40E2-96D6-1DA6457786B0}", but with the same result. How can I reference this PPP adapter, so that I can change its configured DNS and other settings? What does this long string mean? I do not have this PPP adapter connection on my "show all connections" panel, because I have a VPN app - when running it, this PPP adapter will be automatically created for me.

  Read the article

• setup Mac Book Wifi interface as Wifi hotspot using specific DHCP option

  - by srjohnhuang

  I want to using my Mac Book as an access point. Besides that I also need to configure its DHCP server to not provide DNS info. For example, Mac Books AP's ssid is "MacBookHotspot". While my iPhone connected to "MacBookHotspot", I want the Wifi info displayed my iPhone would be looked like: IP ADDRESS DHCP(tab) IP Address 192.168.0.1 Subnet Mask 255.255.255.0 Router 192.168.0.254 DNS Search Domains Client ID (key point: DNS filed is blank) Does anyone have any good suggestion? Thanks!

  Read the article

• Cannot create a new domain in an existing active directory forest

  - by Mackenzie Carr

  I have a domain controller setup on Windows Server 2008 R2 (Forest) and I have another Windows Server 2008 R2 (New Domain) and I want to create a new domain in an existing forest. I get the following error: An Active Directory domain controller for the domain mackdev.mackenziecarr.com could not be contacted The error was "no records found for the given DNS query" The query was for the SRV record for: _ldap._tcp.dc._msdcs.mackdev.mackenziecarr.com I've seem to have tried everything even tried adding this record to the DNS server of the primary forest. I even successfully joined this server to the domain without any issues but trying to create a new domain under the existing forest is no luck. The primary forest I.P. address is 192.168.2.20 the server that I am using to try to make a child domain is 192.168.2.21 My ipconfig are as follows: I.P. Address: 192.168.2.21 Subnetmask: 255.255.255.0 Gateway: 192.168.2.1 Primary DNS: 192.168.2.20

  Read the article

• Website running on Tomcat port 8443 will only resolve with IP address, not dns

  - by littleK

  I recently set up a web server running tomcat 7 on Ubuntu 12.04. It is currently running on port 8080, however I just enabled SSL on port 8443. Here's my problem: For port 8080, the website is resolved with DNS: (http://www.mywebpage.com:8080) For port 8443, I can only access the website with the IP Address (http://0.0.0.0:8443). It will not work if I use the DNS name. I ultimately want to disable port 80 and use port 8443 only. Does anyone know why I cannot resolve the website on port 8443 using DNS, and how I might fix it? Thanks!

  Read the article

• Change my MX record on my server to google MX?

  - by Dejan.S

  Hi. I got a windows server 2008 where I host a site, now I decided to have the email on google apps. I did add the MX records I get from them to my DNS settings on the server but with no luck. I recently started doing server stuff so I did like this. Server Manager / Roles / DNS Server / DNS / SERVERNAME / MYDOMAIN / Forward Lookup / New MX Host or child domain: What goes here? FQDN: here is my domain name, i think because I named the ns my domain? FQDN MX: here is the google MX record I got from them MSP: 10 I have no Idea where I go wrong but I thought I would ask you guys if any of you can maybe give me some tips on what to look for or any newbee mistake I do that you see from this little info. I really appreciate all help I could get on this.

  Read the article

• Azure cloud app subdomain pointing to actual domain

  - by Amit Aggarwal

  Say we have a domain xyz.com registered with some registrar ... we pointed that domain to the name server of our dedicated server where the DNS will be hosted for that domain. Now, we just want that dedicated server to host the emails coming and the domain will point to abc.cloudapp.net (azure cloud app, they don't provide any static IP ... and only public url is given) Now, someone please helping me in editing/creating the DNS file on our dedicated server to make sure things work properly... if possible past here minimum settings we need in DNS file to make sure mails are on dedicated server and app is on cloud... Thanks, Amit

  Read the article

• OpenDNS servers initial response is very slow

  - by Ben Collins

  I've got a Time Warner cable ISP package (RoadRunner), and the modem they gave me doesn't allow me to specify which DNS servers to use; it always uses whatever the upstream dhcp server gives it. I prefer to use OpenDNS on my home network, so i've configured a couple of my PCs manually in the Windows adapter settings for IPv4 such that their IP addresses are obtained via DHCP, but the DNS server settings are fixed to the OpenDNS server IPs. Now, when I startup Windows on these PCs, it always takes 2-3 minutes to start receiving responses from the DNS servers; any request before that times out. While not debilitating, this is quite annoying. Any ideas why this might be happening?

  Read the article

• Using Linode as a proxy server wrapped in DNS to bypass paid internet services

  - by snihalani

  I have a linode server that I use for development. I was thinking of using that as a proxy server. I have noticed that most paid connections allow DNS queries but don't allow http until I pay them. I verified this by flushing my dns cache and nslookup some random websites. How do I create a proxy server that allows me to may be wrap my packets from my computer in DNS packets, relay to my linode server with ssh key authentication and act as a broker? Thanks.

  Read the article

• Slow IE8 Start-up due to LDAP DNS queries

  - by MikeJ-UK

  Recently (in the last few days), my installation of IE8 has been taking 15 to 20 seconds to load my home page. Specifically, the sequence of events (as reported by WireShark) is:- Browser issues a DNS A query to resolve the home page server's IP address. Browser then spends the next 15-20 seconds broadcasting DNS SRV _LDAP._TCP queries, (roughly on a 2 second tick) to which it receives no answer (we have no LDAP servers). Browser re-issues the DNS A query and resolves the server's IP address again. Finally, the browser issues an HTTP GET for the home page. Does anyone know why this is happening? Possibly related to this question EDIT: @Massimo, LDAP query is :- Domain Name System (query) Transaction ID: 0x11c5 Flags: 0x0100 (Standard query) Questions: 1 Answer RRS: 0 Authority RRS: 0 Additional RRS: 0 Queries _LDAP._TCP: type SRV, class IN Name: _LDAP._TCP Type: SRV (Service location) Class: IN (0x0001)

  Read the article

• Ubuntu, apache2 wildcard dns to subdomain

  - by Mark van Velthoven

  Currently I'm hosting my own (ubuntu) server with the following services: samba, ftp and a webserver. I've bought a domain and linked the DNS A-record to my ISP's IP. This is working correctly. Now I'd like to use the DNS wildcard-record to create subdomains. I want to avoid waiting 24hrs before the DNS change completes. Thusfar I'm only able to redirect all incoming wildcards to the same directory: test1.domain.com redirects to /var/www test2.domain.com redirects to /var/www Although I'd like to get: test1.domain.com redirects to /var/www/test1 test2.domain.com redirects to /var/www/test2 My guess would be to change the file /etc/apache2/sites-available/domain. Any help or tips would be welcome! Thanks, Mark

  Read the article

• ISC Bind support for GSS-TSIG DDNS Updates?

  - by netlinxman

  First, has anyone EVER configured ISC bind 9.5.0 OR greater with support for GSS-TSIG Dynamic DNS Updates AND gotten it to work? If so, what is the configuration that was used to make that happen? I feel close to having this working. I see that GSS cred passes w/o apparent error during the TKEY negotiation with an Active Directory DC and the BIND DNS server: client 192.168.0.30#52314: query gss cred: "DNS/[email protected]", GSS_C_ACCEPT, 4294967256 gss-api source name (accept) is [email protected] process_gsstkey(): dns_tsigerror_noerror client 192.168.0.30#52314: send But, when the Update is sent, it is refused: client 192.168.0.30#58330: update client 192.168.0.30#58330: updating zone 'example.com/IN': update failed: rejected by secure update (REFUSED) client 192.168.0.30#58330: send Does anyone have this working in the real world?

  Read the article

• One-way forest trust between geographically distributed forests using Server 2008 R2

  - by bwerks

  Hi all, I'm planning out a joinder between two domains, as would take place with contracting companies. Forests A and B exist in distant sites, and there is to be a one-way forest trust so that domain users in Forest A can be authenticated on machines in Forest B. In order to facilitate this, each forest's domain controller must be able to contact each other in order to set up & confirm the trust, but my question is what underlying networking magic must take place beneath it. So far the prevailing approach has been to maintain a VPN connection between the two sites, but the technet documentation seems to indicate that DNS forwarding may be the way to go. Is this the case? Furthermore, if DNS will suffice, does that mean that there must be a server running DNS on boundary servers in each domain so that they can be reached from across the internet? How must they be configured? Thanks!

  Read the article

• IIS Seems to Forward Domain/IP to Domain Controller

  - by asinc

  We have a server (Server 1) with Win 2008 that is accessible by RDP and also is set as the primary DNS IP for a domain (example.com). This server is on the same network as an SBS 2008 server (Server 2) which is the domain controller and internal Dns server. Web requests going to example.com with IP of Server 1 are being passed to Server 2 and served up by IIS from Server 2. What causes this to happen? Is there a safe way to have Server 1 IIS handle the web requests which was our expected outcome? Example: DNS entry on ISP: example.com = 111.111.111.111 Server 1 = 111.111.111.111 Server 2 = 111.111.111.112 Web user goes to example.com in browser, and the page is actually returned from 111.111.111.112?

  Read the article

• Join domain in windows 7 [on hold]

  - by Hassan Ali Khan

  I have created a domain on server machine and when i am trying to join a domain through another machine of windows 7 through the following steps: Goto MY Computer Properties - Change settings - ComputerName - click on change button - click on radio button "Domain" and enter domain name. After that when i click on OK button and enter the username and password credentials. It show me the following error: An attempt to resolve the DNS name of a domain controller in the domain being joined has failed. Please verify this client is configured to reach a DNS server that can resolve DNS names in the target domain

  Read the article

• Explanation of various domain name records?

  - by Kumar

  At the time of hosting, normally we just change name servers in the domain control panel. It's fine if both mail and web servers are the same. When they're different, we need to change the DNS records. When I try to point my blog to my domain name, I came to know about the various types of DNS records - A Records, AAA Records, MX Records, CNAME Records, NS Records, TXT Records, SRV Records, SOA Records, etc. I searched on Google, but would like to know more about these deeply. I found this link on the Internet - http://www.directnic.com/help/faq/?question_id=103 and got some idea about the different DNS records. But I have some more questions. How do the domain name records work? Is there any difference between NS record and other records in the way they work? Where should the NS record point to when using A record, CNAME record and MX record?

  Read the article

• How can I migrate websites between two identical servers?

  - by edude05

  I have two servers that have a nearly identical (software) configuration. We are upgrading the web servers to run windows server 2008 R2, one already is however the main one (that currently has sites) is on WS2008. Now, the old server is ns.mydomain.com and the new server is ns1.mydomain.com. Since dns automatically fails over to ns1.mydomain.com I'd like a way to move all the vhosts to the new server. Is there an automatic way to move / recreate all the vhosts on the new server? I have figured out how to migrate the DNS records already DNS Migration and since both servers are on the same private network migrating the website data isn't a large issue. Every site is running PHP & MySQL and the MySQL server is external so the records won't have to be moved. Thanks

  Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >