Search Results

Search found 18545 results on 742 pages for 'put'.

Page 71/742 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

  • PC wont boot with more than 1 stick of RAM.

    - by Aidan
    Hi Guys, I've got the following computer and I've just put in a new CPU QX9650 and I've run into this problem since making this hardware change. Whenever I put more than 1 of my 4 sticks of ram into my machine it wont load an OS. It'll go through the BIOS but BSOD on windows load. It also wont let me install an OS from disk or boot into Linux. I've ran memtest with all 4 sticks in and I get 10k+ errors on test5. Each stick of ram on it's own is fine and functions properly. I only have problems when all 4 sticks are in the machine at the same time. System specs.. CPU: QX9650 Mobo: Asus P5B 2104 BIOS RAM: 2xPC25400 DDR2 , 2xPC2 6400 both OCZ. Is the problem on my end or is the CPU faulty?

    Read the article

  • PC wont boot with more than 1 stick of RAM.

    - by Aidan
    Hi Guys, I've got the following computer and I've just put in a new CPU QX9650 and I've run into this problem since making this hardware change. Whenever I put more than 1 of my 4 sticks of ram into my machine it wont load an OS. It'll go through the BIOS but BSOD on windows load. It also wont let me install an OS from disk or boot into Linux. I've ran memtest with all 4 sticks in and I get 10k+ errors on test5. Each stick of ram on it's own is fine and functions properly. I only have problems when all 4 sticks are in the machine at the same time. System specs.. CPU: QX9650 Mobo: Asus P5B 2104 BIOS RAM: 2xPC25400 DDR2 , 2xPC2 6400 both OCZ. Is the problem on my end or is the CPU faulty?

    Read the article

  • Cant install windows 7(boot problem)

    - by Vadiklk
    First of all, I cant boot my windows 7. I get a black screen with a cursor up in the left corner. So, I tried using windows 7 installation which I've put on my flash drive. To boot from the drive, I've changed the boot order to boot from the drive first. It boots but does not find any HDD to install the windows on(which is pretty logic, I dont boot the HDD soon enough for the installer). but if i put the HDD in front of the flash drive in the boot order, it will just try to load windows 7 and i will get the black screen again. I've tried putting the HDD first and clicking f8 a lot. All I've got is an error. Something about some software change. I dunno. Help me please, cant do anything with my laptop till then.

    Read the article

  • I created a program based on an LGPL project, and I'm not allowed to publish the source code

    - by Dave
    I thought LGPL was a permissive license, just like MIT, BSD or Apache. But today I read, that only linking to LGPL (libraries etc) is allowed from closed-source code - other than that, it's copyleft - so I have to publish code that is based on an LGPL program. I created a program for my employer that is based on an LGPL program, but has considerable modifications to it. Of course, I am not allowed to put that modified source code out there. At the same time, I have to, if I distribute it (right?). So I wonder whether there is a workaround to this, so I can keep this closed-source (I wish I could publish the source) - any suggestions? My idea: can I put most functions of the original LGPL app into an external library, write the core executable from scratch, but refer back to the library for all functions that I haven't modified? Currently, everything is in a .jar file (it's Java/Swing). if you think my idea is legally/technically feasible - how much effort would it be to seperate what I wrote and what the original is? I'm not the most java savvy.

    Read the article

  • Dealing with the node callback pyramid

    - by thecoop
    I've just started using node, and one thing I've quickly noticed is how quickly callbacks can build up to a silly level of indentation: doStuff(arg1, arg2, function(err, result) { doMoreStuff(arg3, arg4, function(err, result) { doEvenMoreStuff(arg5, arg6, function(err, result) { omgHowDidIGetHere(); }); }); }); The official style guide says to put each callback in a separate function, but that seems overly restrictive on the use of closures, and making a single object declared in the top level available several layers down, as the object has to be passed through all the intermediate callbacks. Is it ok to use function scope to help here? Put all the callback functions that need access to a global-ish object inside a function that declares that object, so it goes into a closure? function topLevelFunction(globalishObject, callback) { function doMoreStuffImpl(err, result) { doMoreStuff(arg5, arg6, function(err, result) { callback(null, globalishObject); }); } doStuff(arg1, arg2, doMoreStuffImpl); } and so on for several more layers... Or are there frameworks etc to help reduce the levels of indentation without declaring a named function for every single callback? How do you deal with the callback pyramid?

    Read the article

  • Vacation scheduler/viewer

    - by Norfeldt
    I'm looking for a solution that allows multiple persons to put plan and notify their vacation by putting it in their electronic calendar and invite a dedicated "robot" email. On the other side I should be able to get a quick overview of the vacation for each person and do a print out that allows me to put it on a board. Example: John puts his winter vacation for week 7 into his calendar and invite [email protected]. Ben does the same thing for week 4 and 5 and invites [email protected]. Dilbert host the [email protected] and prints out and overview for the next 3 months. Each person's vacation is either stated by name or/and color on the print out. I would like to do the thing with standard business software like Outlook 2010 without installing too many softwares. But at the same time it should be easy and quick to make the print outs without too much fiddling Am I dreaming ?

    Read the article

  • Session Evaluations

    - by BuckWoody
    I do a lot of public speaking. I write, teach, present and communicate at many levels. I love to do those things. And I love to get better at them. And one of the ways you get better at something is to get feedback on how you did. That being said, I have to confess that I really despise the “evaluations” I get at most venues. From college to technical events to other locations, at Microsoft and points in between, I find these things to be just shy of damaging, and most certainly useless. And it’s not always your fault. Ouch. That seems harsh. But let me ask you one question – and be as honest as you can with the answer – think about it first: “What is the point of a session evaluation?” I’m not saying there isn’t one. In fact, I think there’s a really important reason for them. In my mind, it’s really this: To make the speaker / next session better. Now, if you look at that, you can see right away that most session evals don’t accomplish this goal – not even a little. No, the way that they are worded and the way you (and I) fill them out, it’s more like the implied goal is this: Tell us how you liked this speaker / session. The current ones are for you, not for the speaker or the next person. It’s a popularity contest. Don’t get me wrong. I want to you have a good time. I want you to learn. I want (desperately, oh, please oh please) for you to like me. But in fact, that’s probably not why you went to the session / took the class / read that post. No, you want to learn, and to learn for a particular reason. Remember, I’m talking about college classes, sessions and other class environments here, not a general public event. Most – OK, all – session evaluations make you answer the second goal, not the first. Let’s see how: First, they don’t ask you why you’re there. They don’t ask you if you’re even qualified to evaluate the session or speaker. They don’t ask you how to make it better or keep it great. They use odd numeric scales that are meaningless. For instance, can someone really tell me the difference between a 100-level session and a 200-level one? Between a 400-level and a 500? Is it “internals” (whatever that means) or detail, or length or code, or what? I once heard a great description: A 100-level session makes me say, “wow - I’m smart.” A 500-level session makes me say “wow – that presenter is smart.” And just what is the difference between a 6 and a 7 answer on this question: How well did the speaker know the material? 1  2  3  4  5  6  7  8  9  10 Oh. My. Gosh. How does that make the next session better, or the speaker? And what criteria did you use to answer? And is a “10” better than a “1” (not always clear, and various cultures answer this differently). When it’s all said and done, a speaker basically finds out one thing from the current session evals: “They liked me. They really really liked me.” Or, “Wow. I think I may need to schedule some counseling for the depression I’m about to go into.” You may not think that’s what the speaker hears, but trust me, they do. Those are the only two reactions to the current feedback sheets they get. Either they keep doing what they are doing, or they get their feelings hurt. They just can’t use the information provided to do better. Sorry, but there it is. Keep in mind I do want your feedback. I want to get better. I want you to get your money and time’s worth, probably as much as any speaker alive. But I want those evaluations to be accurate, specific and actionable. I want to know if you had a good time, sure, but I also want to know if I did the right things, and if not, if I can do something different or better. And so, for your consideration, here is the evaluation form I would LOVE for you to use. Feel free to copy it and mail it to me any time. I’m going to put some questions here, and then I’ll even include why they are there. Notice that the form asks you a subjective question right away, and then makes you explain why. That’s work on your part. Notice also that it separates the room and the coffee and the lights and the LiveMeeting from the presenter. So many presenters are faced with circumstances beyond their control, and yet are rated high or low personally on those things. This form helps tease those apart. It’s not numeric. Numbers are easier for the scoring committees but are useless for you and me. So I don’t have any numbers. We’re actually going to have to read these things, not put them in a machine. Hey, if you put in the work to write stuff down, the least we could do is take the time to read it. It’s not anonymous. If you’ve got something to say, say it, and own up to it. People are not “more honest” when they are anonymous, they are less honest. So put your name on it. In fact – this is radical – I posit that these evaluations should be publicly available. Forever. Just like replies to a blog post. Hey, if I’m an organizer, I would LOVE to be able to have access to specific, actionable information on the attendees and the speakers. So if you want mine to be public, go for it. I’ll take the good and the bad. Enjoy. ------------------------------------------------------------------------------------------------------------------------------------------- Session Evaluation – Date, Time, Location, Topic Thanks for giving us your time today. We know that’s valuable, and we hope you learned something you can use from the session. If you can answer these questions as completely as you can, it will help the next person who attends a session here. Your Name: What you do for a living: (We Need your background to evaluate your evaluation) How long you have been doing that: (Again, we need your background to evaluate your evaluation) Paste Session Description Here: (This is what I said I would talk about) Did you like the session?                     No        Meh        Yes (General subjective question – overall “feeling”. You’ll tell us why in a minute.)  Tell us about the venue. Temperature, lights, coffee, or the online sound, performance, anything other than the speaker and the material. (Helps the logistics to be better or as good for the next person) 1. What did you expect to learn in this session? (How did you interpret that extract – did you have expectations that I should work towards for the next person?) 2. Did you learn what you expected to learn? Why? Be very specific. (This is the most important question there is. It tells us how to make the session better for someone like you.) 3. If you were giving this presentation, would you have done anything differently? What? (Helps us to gauge you, the listener, and might give us a great idea on how to do something better. Thanks!) 4. What will you do with the information you got? (Every presenter wants you to learn, and learn something useful. This will help us do that as well or better)  

    Read the article

  • Plesk directory structure problems

    - by johnnietheblack
    I have an entire website with the following directory structure: /example.com /html (public) /css /js index.php /lib session.php other_lib_files.php /views index.php /models /controllers As illustrated, the html is public, and anything above it is private. My site now needs to upgrade servers, and the new server (Linux w/ Plesk) has the following structure (reduced to the problematic parts below): /myplesksite.com /httpdocs /css /js index.php /private /lib /models /views What I would THINK is that I should be able to put my /lib, /views, /models, etc in the directory directly above /httpdocs, the same way I had it in my previous server. Is that possible? Or do I have to put it in private? I would really love not to have to adjust my internal paths throughout the site if not necessary...

    Read the article

  • Application outside document root in Apache/CentOS

    - by liz
    I have a PHP application running in Apache on CentOS 6. The document root is pointed to a specific app folder: /var/www/my-project/app I'm trying to get phpMyAdmin running on the same server but I don't want to put it in the application folder. Instead I'd like to put it here /var/www/apps/phpmyadmin I'm using a sub domain for the server. What's the easiest way for me to get access to phpMyAdmin? Another subdomain? sub subdomain? Re-direct a folder?

    Read the article

  • DevWeek & SQL Social @ London

    - by Davide Mauri
    Yesterday I had my “SQL Server best practices for developers” session at DevWeek and I really enjoyed it a lot. For all those who asked, I’ll put slides and demos online as soon as possible. I’ve just waiting to know where I can put it (on my website or somewhere else), so it should be just a matter of some days. If you attended my session and would like to rate it, please use SpeakerRate here: http://speakerrate.com/talks/2857-sql-server-best-practices-for-developers I also have to thank Simon Sabin for the very nice event he organized for SQLSocial http://sqlblogcasts.com/blogs/simons/archive/2010/02/16/SQLSocial-presents-Itzik-Ben-gan--Greg-Low-and-Davide-Mauri.aspx A lot of people attended and we really had interesting discussions. And it was my first time doing a session at a pub, and I must say it's *really* funny and enjoyable, expecially when you have free beer :-) Now back to Italy to the “usual” work! Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • DVI-D Splitter Not Working with GeForce 8400gs

    - by jimdrang
    I have a GeForce 8400gs and it has a DVI and VGA port on the back. I was using dual monitors with one VGA and one DVI cable. I wanted both displays to be digital so I bought a DVI-D splitter and put one DVI cable in each monitor, connected them to the splitter and put the single merged connection in the back of the cards DVI connection. It will not recognize the second monitor (I'm not even sure how it determined which one was the first monitor). The tech specs state that it supports "Two dual-link DVI outputs for digital flat panel display resolutions up to 2560x1600" http://www.nvidia.com/object/geforce_8400_tech_specs.html. Do I need a different converter or is my only option for dual monitors with this card one VGA, one DVI?

    Read the article

  • Script on startup without update-rc.d

    - by Jean-Philippe Blary
    I've a debian minimal installation, and I just want to start a script at startup. So, I've a script at /etc/init.d/myscript, I put a chmod 700, and create symlinks ('S20myscript') into /etc/rc2.d, rc3.d, rc4.d and rc5.d. But the script is NOT launched at all. When I put this script with update-rc.d (or insserv...), it works. I don't understand, am I forced to use this command? (and no, I don't want to use /erc/rc.local). Thanks!

    Read the article

  • Hosting a web site at home: ISP Blocking port 80?

    - by tombull89
    Hello, I presume this is a better place to put this rather than server fault. I'm interested in setting up a small site to host at home as a "proof of concept" exercise, i.e. to prrove that I know how to do it. I've got a (virtual) server 2003 machine with a site on it, all configured with port forwarding through to 80 on my server. I have a Belkin F5D7634 which I have put my DYNDNS details in but when I try to go to my DYNDNS address it comes up with the page cannot be displayed. My ISP is Carphone Warehouse/AOL and I've been unable to find any information if they block port 80. If they do, can anybody reccomend a home provider that does not block port 80? Regards, Tom.

    Read the article

  • How to indicate to a web server the language of a resource

    - by Nik M
    I'm writing an HTTP API to a publishing server, and I want resources with representations in multiple languages. A user whose client GETs a resource which has Korean, Japanese and Trad. Chinese representations, and sends Accept-Language: en, ja;q=0.7 should get the Japanese. One resource, identified by one URI, will therefore have a number of different language representations. This seems to me like a totally orthodox use of content negotiation and multiple resource representations. But when each translator comes to provide these alternate language representations to the server, what's the correct way to instruct the server which language to store the representation under? I'm having the translators PUT the representation in its entirety to the same URI, but I can't find out how to do this elegantly. Content-Language is a response header, and none of the request headers seem to fit the bill. It seems my options are Invent a new request header Supply additional metadata in a multipart/related document Provide language as a parameter to the Content-Type of the request, like Content-Type: text/html;language=en I don't want to get into the business of extending HTTP, and I don't feel great about bundling extra metadata into the representation. Neither approach seems friendly to HTTP caches either. So option 3 seems like the best way that I can think of, but even then it's decidedly non-standard to put my own specific parameters on a very well established content type. Is there any by-the-book way of achieving this?

    Read the article

  • How to determine the amount to spend per phrase on Adwords research?

    - by Anonymous -
    My company would like to start a PPC advertising campaign. Whilst I understand the concept and how to set everything up from a technical point of view, this is something I've never done before. Logically, we'd like to test out a wide range of keywords that we think would lead to conversions, which we've put together through brainstorming and with some help from Google's External Keyword Tool. Sub-question whilst I remember - am I correct in thinking that in Google's keyword tool, keywords that we think will perform well that have a low competition yet high monthly searches are good since there will be less advertisers, meaning our bid per click will be less? Is there a common benchmark or process of doing a round of tests with keywords? Should we wait for 100 clicks on each keyword, see which ones have lead to the most sales (or rather, sales that are sustainable with the cost per click of that keyword), then drop the ones which aren't converting and put that budget onto the converting keywords? We realistically have a few hundred keywords/phrases we would like to test, but spending $100 per keyword/phrase is going to work out as quite an expensive test. It would be nice to be able to spend $5-10 per phrase, but I don't think the sample size would be great enough to determine anything usefully reliable. Another approach might be to setup all the keywords, and those that bring the most sales within x hours/days would be the ones we use. What is the common procedure with things like this? I know there are a plethora of companies that specialize in exactly this, but this is something we anticipate doing a lot in the future, so it would make sense to do it in house if at all possible.

    Read the article

  • suggestions for lonewolf dev setup

    - by d33j
    I'm looking for some suggestions for a better development setup. Background: I'm a crusty old software engineer (mostly java of late) and I have around 50 - 100 incomplete java projects scattered everywhere, usb keys, HDDs, and spanning across 5 or 6 computers etc, which have been put on hold for a few years (ie: family). I have no version control at home. I've been using IntelliJ for around 10 years, so that's the only constant. I'm thinking of nominating one machine as a headless server to put all my projects on, maybe a ubuntu box, that way It won't matter which device I'm on, all my projects can be accessed (and I don't have to waste time actually looking for them). I don't need to access code over the net. These are my own 'happy place' projects so I only work on them when I'm at home, however I can see the benefit of the tasking app being online, that way if I think of something while on public transport lets say, I can add it then & there, but it's not a requirement. I can wait until I get home to create tasks. Summary: So I need some sort of version control so I can rollback mistakes, and some sort of simple tasking software where I can assign tasks for myself later on when I get time. I use Subversion, Sonar, Jira and Crucible at work but I think it's a little bit of an overkill for me though. What do you suggest?

    Read the article

  • How Can I Set the OS X Dock to Show Instantly Instead of Waiting Half a Second in Snow Leopard?

    - by Patrik Björklund
    Having a MacBook Pro 13" I find myself trying to maximize the screen real estate constantly which have led me to put the dock at the right hand corner of the screen. Now in an attempt to save a few more pixels I decided to give autohiding of the dock a go and ran into a problem that have plagued me all night... When you toggle the switch to automatically hide the dock you get stuck with a small delay before it appears when hovering the edge of the screen. I have learnt that this is one of the many design principles Apple have put in use. In this case it appears to be their mission to save me from seeing the dock those few times when it's not intentional to touch the screens edge. In Windows there was a way to tweak this setting to have the menubar appear instantly by altering some registry value. Is there some way I can do this in Mac OS X?

    Read the article

  • FOSS Development: Who develops the OS-specific packages?

    - by achristi
    I have a couple of FOSS projects. They can be a bit of a pain to get running unless you've got dependencies in place already, which I figure is par for the course for FOSS projects. We know that each free operating system out there has its own package management systems. A few of them, such as homebrew on Mac OS or AUR on Arch linux are very friendly to community contributions. What I am wondering is, who exactly is expected to contribute packages? Primarily I am concerned with the case of small or developing projects, since it's pretty standard for the big projects to be put in there by the OS maintainers. From my perspective, it is something of a chicken-egg problem, because your software will not make its way into a package system if it does not have users, and it is less likely to gain users if it is not easy to install and use. For the sake of discussion, let's assume that the software in question is actually legitimately useful. I can see where people could create crapware or spam and that should obviously be kept out of any package system. So, in summary, whose job is this? Is it spammy for a FOSS software dev to put his own work into various OS package repositories?

    Read the article

  • Why did Intel drop the Itanium?

    - by Cole Johnson
    I was reading up on the history of the computer and I came along the IA-64 (Itanium) processors. They sounded really interesting and I was confused as to why Intel would decide to drop them. The ability to choose explicitly what 2 instructions you wanted to run in that cycle is a great idea, especially when writing your program in assembly, for example, a faster bootloader. The hundreds of registers should be convincing for any assembly programmer. You could essentially store all the functions variables in the registers if it doesn't call any other ones. The ability to do instructions like this: (qp) xor r1 = r2, r3 ; r1 = r2 XOR r3 (qp) xor r1 = (imm8), r3 ; r1 = (imm8) XOR r3 versus having to do: ; eax = r1 ; ebx = r2 ; ecx = r3 mov eax, ebx ; first put r2 into r1 xor eax, ecx ; then set r1 equivalent to r2 XOR r3 or ; SAME mov eax, (imm32) ; first put (imm32) into r1 xor eax, ecx ; then set r1 equivalent to (imm32) XOR r3 I heard it was because of no backwards x86 comparability, but couldn't thy be fixed by just adding the Pentium circuitry to it and just add a processor flag that would switch it to Itanium mode (like switching to Protected or Long mode) All the great things about it would have surly put them a giant leap ahead of AMD. Any ideas? Sadly this means you will need a very advanced compiler to do this. Or even one per specific model of the CPU. (E.g. a newer version of the Itanium with an extra feature would require different compiler). When I was working on a WinForms (target only had .NET 2.0) project in Visual Studio 2010, I had a compile target of IA-64. That means that there is a .NET runtime that was able to be compiled for IA-64 and a .NET runtime means Windows. Plus, Hamilton's answer mentions Windows NT. Having a full blown OS like Windows NT means that there is a compiler capable of generating IA-64 machine code.

    Read the article

  • s3cmd run on command line not on cron

    - by Jonar
    Many have said that the problem is with environment but I still can't seem to solve this problem. BTW I am using Ubuntu 9.10 login as user, then sudo -s using this command: s3cmd put file s3://bucket worked! now here is the simple script intended for testing: #! /bin/bash env >/tmp/cronjob.log s3cmd put file s3://bucket issuing the command crontab -e * * * * * /opt/script 2>&1 | logger Then using tail to syslogs Dec 3 23:22:01 ubuntu CRON[10795]: (root) CMD (/opt/script 2&1 | logger) But by verifying it on s3Fox Organizer, the file is not uploaded. (I tried changing the #! /bin/sh (no effect), putting crons on /etc/crontab (no effect), setting HOME=/home/user (no effect) What are other options to try? Or other ways to debug this problem. Thanks

    Read the article

  • Why the different coarse threaded screws?

    - by Luke
    I'm seeing more and more of these screws (pictured below), which are almost triangular. I find I can only put them into Power Supplies and PCI(e) cards in cases, but they will break/strip away if I put them into a hard drive or a standoff for a motherboard Notice the triangular shape on it? On the Root Access chat, I started asking, but no concrete answer yet. I don't assume it's a production flaw, as I've seen hundreds and replaced them with the "proper" round screws. It is coarse-threaded, not fine-threaded (i.e. for a DVD drive or floppy drive). What are they for, and why do we need them instead of the regular round ones?

    Read the article

  • That Tool is cURLy

    When you just use IE, Firefox or Chrome it can be easy to forget that HTTP is about more then just going to check the latest tech news at Engadget. It is a full and rich protocol, and a great way to experience that richness is the powerful command line utility cURL. cURL has a lot of options, but the syntax starts out simple. You can retrieve the contents of a web page with a simple curl http://blogs.claritycon.com/. The results should be the full text of the web page, tags and all. From there, you can use X to specify the HTTP verb to use, POST, PUT, DELETE, PATCH, etc and d to specify the payload of a POST or PUT. I have found cURL to be incredibly useful for two scenarios. First, as a good way to test basic web services. Second, while working a bit with CouchDB and another document based database, cURL has helped me learn more about RESTful APIs, including different verbs and response codes. cURL is a mainstay in our environments and programming languages precisely because it is simple, powerful and discoverable. I encourage more .NET developers to take a look, bask on the command line for a while and enjoy the plain text of the web. And this excellent logo:     -- Relevant Links -- Its not always the case with manuals, but the manual for cURL is quite useful: http://curl.haxx.se/docs/manual.html To make your command line look a little nicer (and more powerful) on Windows, check out Console and add some transparency effects: http://sourceforge.net/projects/console/Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Branding/Restricting a Software by License/Serial

    - by Sid
    I have made a POS System for a client of mine using MS Access Server-Client approach. He asked me to brand his software to allow only a certain "number" of users (cashiers) to access the POS System, and must be determined to the license his client will buy. EX: 10 User License = 10 Cashiers ( not necessarily 10 users, it can be 30 users, shifting) = it means 10 PCs will be installed with the client software I made. How and where do I put the logic that will determine if it is licensed or not. What I have done: I have created a serial key generator using Name. Problem is it can be duplicated once you give than name+serial combination, it would still work. I am counting the number of users logged at a time. This could be problematic as I am using MSAccess and not MSSQL. I have scrapped this idea, He also asked me if I could just put serial+mac address combination. That I could do but he will have a hard time implementing it and selling it if he needs the mac address of every computers to be installed with my POS. I am at lost on what can I do. Would like to ask for tips and suggestions. Thank you.

    Read the article

  • Audio input problem in Ubuntu 9.10

    - by Andrea Ambu
    My audio input is a mix of my mic output and my sound card output. I'd like it to be just my mic output. I was able to do so in Ubuntu 9.04 but the interface is 9.10 is totally changed and I tried every my creativity was able to think. It's really annoying when talking to other people over the internet because they keep hearing their voice back. I'm not sure I explained it in clear way so I'll give you an example: What I do: I put an mp3 on play or a video on youtube then open a recorder and start to talk on my mic. What happens: both my voice and audio from mp3/youtube get reordered, even if I put headphones volume to 0 (via hardware). What I'd like to happen: Only my voice should be recorded. I'm sure I'm missing some technical term, but that's the problem and I'd like to solve it in Ubuntu 9.10, any idea?

    Read the article

  • COUNTIFS over multiple worksheets

    - by Alison
    I am trying to make COUNTIFS go across two worksheets in the same excel file (Final Driver Forecast Model), just on different tabs. I need it to count if a driver returns between a certain time, then to put a 1 in that time slot. For example if a driver returns at 2:30 p.m. on the 27th, then the formula will put in a 1 in the July 27th slot from 2:00 p.m.-4:00 p.m. I have tried two different formulas the first is =COUNTIF3D(Bid Sheet '[1]Bid Sheet 1'!O4:O110,">="&B76,O4:O110,"<="&C76) This is looking at the worksheet called Bid Sheet 1 and the column O4 through O110 and deciding if the time fits in the time slot of B76 00:00 (12 a.m.) and C 76 2:00 a.m. The second formula I tried to do the exact same thing =COUNTIF3D(O4:O110,">="B76,O4:O110,"<="&C76,"FinalDriverForecastModel',Bid Sheet 1") Neither is working and they both give me #NAME? when I hit enter......What am I doing wrong?

    Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >