Search Results

Search found 22139 results on 886 pages for 'security testing'.

Page 712/886 | < Previous Page | 708 709 710 711 712 713 714 715 716 717 718 719  | Next Page >

• Change Laptop Wireless Card?

  - by Craig

  I have just bought a new Samsung RV511 Laptop (the i5 Version). Anyway it comes installed with a Broadcom Wifi Card, I have a Super Atheros Mini Wifi Card that I would like to swap for the Broadcom one. I use Atheros for security auditing purposes in Linux that the Broadcom one is not good for. Trouble is I have never got to the barebones of a laptop, although I am a Custom PC Builder, laptops i generally have no concern for. Take a look at this picture, I took one back panel off to reveal some of the components: I believe the Wireless Card is where I marked the arrow pointing too. That little white square thing appears to be a sticker of the Wifi card, it says WLAN. How can I access it to swap it with my Atheros one. Do I need to remove all the outermost screws? There are screws located to the right of where I scribbled in Yellow and next to the HDD, do I just remove those? I dont want to destroy the machine, only just got it today. Appreciate some help thanks.

  Read the article

• Auto-rebuild RAID6 with MDADM

  - by user65632

  Hello everybody, i'm new in this forum, and because I see that a lot of people get helped here, i'll ask my question here! I have a openSUSE 11.3 Linux computer with 5 disks of 1TB (WD enterprise disks) in it. with mdadm I configured an RAID6 device. Now, after a lot of thorough testing, i've noticed that when the computer goes down unsuspectedly it could happen (1 time out of 10) that while booting, the md0 device isn't recognised, and then the machine goes in "recovery mode", which means that i have to 'CTRL + C' it so it can boot to openSUSE. Once in openSUSE i have to readd the drive manually with 'mdadm /dev/md0 --add /dev/sdX'. After this everything works back fine (after resynching). So my question is: Is there a way to auto-rebuild the RAID6 device when there are problems? and how can I stop this "recovery mode" from happening. Because the computer will be in a place I can't go to, to connect a keyboard, 'CTRL + C' it just to get in openSUSE. If you could help me, I would be a very very very! happy man! :-) thanks in advance! Mikhail

  Read the article

• Assistance on setup to Connect an offsite server to the LAN via RRAS VPN - Server 2008 R2

  - by Paul D'Ambra

  I have an office LAN protected using a Zyxel Zywall USG 300. I've set up an L2TP/ipsec VPN on that which accepts connections using a shared secret and I've tested this from multiple clients. I have a server offsite and want to set up RRAS to use a persistent connection to the VPN so that it can carry out network jobs even with no one logged in (I'm using it for Micorosft DPM secondary backup). If I create a vpn as if I were setting up a users laptop it can dial in no problem but if I set up a demand dial interface in RRAS it errors. I enable RRAS ticking only demand dial interface (branch office routing) Select network interfaces, right click and choose new demand dial interface Name the VPN ToCompany Select connect using VPN And then L2TP as the vpn type enter the IP address (double-checked for typos!) select Route IP packets on this interface specify static route to remote network as 10.0.0.0/24 with metric of 1 add dial out credentials (again double checked for typos and confirmed with other vpn connections click finish now I right-click on the new interface and choose properties and then the security tab I change Data encryption to optional select only PAP for Authentication (both as per manufacturer of Zywall) click advanced settings against type of vpn and set shared secret then I select the new interface, right-click and choose connect this dials and then errors with either 720 or 811 as the error codes. However, if I create a VPN by going to Network & Sharing center and setting up as if I was creating a VPN from my laptop to the office (say) it dials successfully so I know the VPN settings are correct and the machine can connect to the VPN. Suggests very strongly the problem is how I'm setting up RRAS. Can anyone help?

  Read the article

• Why does redis report limit of 1024 files even after update to limits.conf?

  - by esilver

  I see this error at the top of my redis.log file: Current maximum open files is 1024. maxclients has been reduced to 4064 to compensate for low ulimit. I have followed these steps to the letter (and rebooted): Moreover, I see this when I run ulimit: ubuntu@ip-XX-XXX-XXX-XXX:~$ ulimit -n 65535 Is this error specious? If not, what other steps do I need to perform? I am running redis 2.8.13 (tip of the tree) on Ubuntu LTS 14.04.1 (again, tip of the tree). Here is the user info: ubuntu@ip-XX-XXX-XXX-XXX:~$ ps aux | grep redis root 1027 0.0 0.0 66328 2112 ? Ss 20:30 0:00 sudo -u ubuntu /usr/local/bin/redis-server /etc/redis/redis.conf ubuntu 1107 19.2 48.8 7629152 7531552 ? Sl 20:30 2:21 /usr/local/bin/redis-server *:6379 The server is therefore running as ubuntu. Here are my limits.conf file without comments: ubuntu@ip-XX-XXX-XXX-XXX:~$ cat /etc/security/limits.conf | sed '/^#/d;/^$/d' ubuntu soft nofile 65535 ubuntu hard nofile 65535 root soft nofile 65535 root hard nofile 65535 And here is the output of sysctl fs.file-max: ubuntu@ip-XX-XXX-XXX-XXX:~$ sysctl -a| grep fs.file-max sysctl: permission denied on key 'fs.protected_hardlinks' sysctl: permission denied on key 'fs.protected_symlinks' fs.file-max = 1528687 sysctl: permission denied on key 'kernel.cad_pid' sysctl: permission denied on key 'kernel.usermodehelper.bset' sysctl: permission denied on key 'kernel.usermodehelper.inheritable' sysctl: permission denied on key 'net.ipv4.tcp_fastopen_key' as sudo ubuntu@ip-10-102-154-226:~$ sudo sysctl -a| grep fs.file-max fs.file-max = 1528687 Also, I see this error at the top of the redis.log file, not sure if it's related. It makes sense that the ubuntu user isn't allowed to change max open files, but given the high ulimits I have tried to set he shouldn't need to: [1050] 23 Aug 21:00:43.572 # You requested maxclients of 10000 requiring at least 10032 max file descriptors. [1050] 23 Aug 21:00:43.572 # Redis can't set maximum open files to 10032 because of OS error: Operation not permitted.

  Read the article

• How to send mail with PHP [migrated]

  - by roth66

  My litle problem is about mail() function in PHP, it doesnt want to send emails, to my local server, or anywhere else. I don't think that function was supposed to send mail to adresses like: [email protected]; So I've installed a mail server: hmailserver, I installed a client: dream-mail; I installed sendmaill.exe; (actually unzipped it in a folder, then in php.ini set the sendmail_path to point to it) After countless trials and errors, it still doesn't work. my system would comprise in an Apache server 2.2, and PHP (last version I think 5.3 or somehing), running on windows. And now for avoiding the usual questions (Did you make rules in your firewall etc etc), I guess I should mention, that there arent any connectivity issues, everything is set to "local" (localhost), port 25, 110, 143, are all opened, And, after a few days of fiddling with my brand new mail-server, I manage to make it work. THe Dream-mail client, has a test, trough which it would test its connections, and according to it, the SMTP AND POP3 connections are all successful, it even sends an email, for testing. SO ya, it would work. The problem, remains: PHP mail funcion. And I really need it, since on my website there's a contact form, and right now is useless. I've also checked the form it self, and seems to be alright.

  Read the article

• Installing WindowsAuthentication breaks authentication / web.config?

  - by Ian Quigley

  I have a clean Windows 2008 R2 box (on a VM) and have installed IIS 7.5 with default options. I then copied a website to it (from Windows 7, IIS 7) and after a little tweaking the website is working fine. The website is currently using and working with Anonymous Authentication. I have gone back to the Windows Components/Sever Manager, Roles - Security and ticked and installed Windows Authentication. When I check my server in IIS (top level above sites) - Authentication, I see Anonymous Authentication (enabled) ASP.NET Impersonation (disabled) Forms Authentication (disbaled) Windows Authentication (enabled) When I check my default website - Authentication, I see as above but "Retrieving status" and an error dialog saying There was an error while performing this operation. Details: Filename c:\inetpub\wwwroot\screwturnwiki\web.config Line number: 96 Error: This configuration section cannot be used in this path. This happens when the section is being locked at the parent level. Locking is either by default (overriderModeDefault="Deny"), or set explicity by a location tag with overrideMode="Deny" or the legacy allowOverride="False". I have tried hand editing the web.config with no success. UN-installing Windows Authentication happily returns my site to working with Anonymous Authentication, and allows me to enable/disable these three options. FYI. I am using ScrewTurnWiki with the Active Directory plug in.

  Read the article

• Using proxy.pac to access Apache 2 with a hostname?

  - by leeand00

  Note that I do not have a DNS on my network, and that is why I am resorting to using a proxy.pac file. I would like to be able to access my development Apache 2 server using a name instead of an ip without setting up a full blown DNS. I am aware of setting names in the C:\Windows\System32\drivers\etc\hosts file and the /etc/hosts files, however I cannot edit the hosts file on all of the devices that I am testing the site on. I've added a proxy.pac file to my Apache2 server and pointed my browsers settings to it at: http://192.168.2.221/proxyutils/proxy.pac ...where 192.168.2.221 is thehostname's ip address. I set the above URL in Firefox in the following manner: From the menubar selecting "Edit-Preferences" In the resulting "Firefox Preferences" window clicking the "Advanced" tab. Clicking the "Network" tab Clicking the "Settings" button. Selecting the "Automatic proxy configuration URL:" radio button. Entering http://192.168.2.221/proxyutils/proxy.pac and pressing OK. The contents of the proxy.pac file on the Apache server function FindProxyForURL(url, host) { if( dnsDomainIs(host, "thehostname") ) return "PROXY 192.168.2.221:80"; return "DIRECT"; } In Firefox I then access the following URL: http://thehostname/wp-blog/ And instead of the development version of the Wordpress blog I am trying to access I get a URL of http://thehostnamehttp/thehostname/wp-blog/ in my address bar and a 404 Not Found page in the browser window. Looking over proxy.pac, it seems like calling dnsDomainIs shouldn't work considering I don't have a DNS setup on my network, but I've also tried just comparing the host argument with the string "hostname" and it yielded the same result, even after modifying the proxy.pac file and clicking the reload button near the proxy settings. This could also be a Wordpress problem, since I've noticed that directories without Wordpress seem to function perfectly normally. (see cross post here) Is there any way I can modify my configuration so that I can access the site using http://thehostname/wp-blog/ ?

  Read the article

• Office 2010 Trusted Locations not working after restart

  - by Josh King

  In Excel 2010, on Windows XP, I am unable to open files - through the open dialog box - from a network drive. The sever has already been added to the Trusted Locations and now most security settings turned down or off. Excel will show "Downloading ..." on that status bar and a progress bar which doesn't progress. We have left Excel sitting in this state for 30+ minutes and no change. A similar problem occurs when saving files to network shares. If we use explorer to navigate to the files and double click them they open flawlessly. No add-ins are active. We also have this problem in Word 2010, but the server was not initially in the Trusted Locations. I added it and it worked until the PC was reset, it now exhibits the same issues as Excel where the server is in the Trusted locations but will not open files. I have tried removing the server from the Trusted Location in both applications, restarting the PC and re-adding them (testing before, after and in-between) and had no luck.

  Read the article

• Firewall for internal networks

  - by Cylindric

  I have a virtualised infrastructure here, with separated networks (some physically, some just by VLAN) for iSCSI traffic, VMware management traffic, production traffic, etc. The recommendations are of course to not allow access from the LAN to the iSCSI network for example, for obvious security and performance reasons, and same between DMZ/LAN, etc. The problem I have is that in reality, some services do need access across the networks from time to time: System monitoring server needs to see the ESX hosts and the SAN for SNMP VSphere guest console access needs direct access to the ESX host the VM is running on VMware Converter wants access to the ESX host the VM will be created on The SAN email notification system wants access to our mail server Rather than wildly opening up the entire network, I'd like to place a firewall spanning these networks, so I can allow just the access required For example: SAN SMTP Server for email Management SAN for monitoring via SNMP Management ESX for monitoring via SNMP Target Server ESX for VMConverter Can someone recommend a free firewall that will allow this kind of thing without too much low-level tinkering of config files? I've used products such as IPcop before, and it seems to be possible to achieve this using that product if I re-purpose their ideas of "WAN", "WLAN" (the red/green/orange/blue interfaces), but was wondering if there were any other accepted products for this sort of thing. Thanks.

  Read the article

• Samba between Ubuntu server 10.10 and Windows Vista, Windows 7

  - by chepukha

  I have a linux box running Linux server ubuntu 10.10. I have installed Samba on this linux box and want to share files with my laptops which run Windows Vista home and Windows 7 home. I have been struggling with the setup for almost a month but couldn't get it right. If I try to access share folder from Windows Vista, I get message "Windows cannot access \\server_ip_address". Error code: 0x80070035. The network path was not found. If I access from Windows 7, then after entering password to login I can see the list of share folders on Linux box. But if I click on a share folder, I get the same error message as above. Tail /var/log/samba/log.windows7-pc I got the following message: [2011/03/16 00:17:41.427238, 0] smbd/service.c:988(make_connection_snum) canonicalize_connect_path failed for service sharemedia, path /root/sharemedia Here is my setting in smb.conf [global] share modes = yes netbios name = Samba workgroup = WORKGROUP wins support = yes encrypt passwords = true [sharemedia] comment = Tesing sharing using Samba path=/root/sharemedia/ public = yes valid users = samba_usr_name ; make sure all files are sensible permissions create mask = 0660 force create mask = 0660 directory mask = 2770 force directory mask = 2770 directory security mask = 0000 ; Normal share parameters read only = no browseable = yes writable = yes guest ok = no

  Read the article

• ZFS with L2ARC (SSD) slower for random seeks than without L2ARC

  - by Florian Kruse

  I am currently testing ZFS (Opensolaris 2009.06) in an older fileserver to evaluate its use for our needs. Our current setup is as follows: Dual core (2,4 GHz) with 4 GB RAM 3x SATA controller with 11 HDDs (250 GB) and one SSD (OCZ Vertex 2 100 GB) We want to evaluate the use of a L2ARC, so the current ZPOOL is: $ zpool status pool: tank state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM afstank ONLINE 0 0 0 raidz1 ONLINE 0 0 0 c11t0d0 ONLINE 0 0 0 c11t1d0 ONLINE 0 0 0 c11t2d0 ONLINE 0 0 0 c11t3d0 ONLINE 0 0 0 raidz1 ONLINE 0 0 0 c13t0d0 ONLINE 0 0 0 c13t1d0 ONLINE 0 0 0 c13t2d0 ONLINE 0 0 0 c13t3d0 ONLINE 0 0 0 cache c14t3d0 ONLINE 0 0 0 where c14t3d0 is the SSD (of course). We run IO tests with bonnie++ 1.03d, size is set to 200 GB (-s 200g) so that the test sample will never be completely in ARC/L2ARC. The results without SSD are (average values over several runs which show no differences) write_chr write_blk rewrite read_chr read_blk random seeks 101.998 kB/s 214.258 kB/s 96.673 kB/s 77.702 kB/s 254.695 kB/s 900 /s With SSD it becomes interesting. My assumption was that the results should be in worst case at least the same. While write/read/rewrite rates are not different, the random seek rate differs significantly between individual bonnie++ runs (between 188 /s and 1333 /s so far), average is 548 +- 200 /s, so below the value w/o SSD. So, my questions are mainly: Why do the random seek rates differ so much? If the seeks are really random, they should not differ much (my assumption). So, even if the SSD is impairing the performance it should be the same in each bonnie++ run. Why is the random seek performance worse in most of the bonnie++ runs? I would assume that some part of the bonnie++ data is in the L2ARC and random seeks on this data performs better while random seeks on other data just performs similarly like before.

  Read the article

• Connecting jconsole using SOCKS to Amazon EC2

  - by freshfunk

  I'm trying to use jconsole to view stats on an EC2 instance by using a socks proxy created by SSH. I've tried the various scripts mentioned in the links below but to no avail: http://simplygenius.com/2010/08/jconsole-via-socks-ssh-tunnel.html http://gabrielcain.com/blog/2010/11/02/using-ssh-proxying-to-connect-jconsole-to-remote-cassandra-instances/ I'm running ssh -f -ND 8123 myuser@mymachine and verified that at least Firefox goes through it as a proxy. I then run jconsole -J-DsocksProxyHost=localhost -J-DsocksProxyPort=8123 service:jmx:rmi:///jndi/rmi://ec2-XX-XX-XXX-XXX.compute-1.amazonaws.com:8080/jmxrmi I run netstat -n on my EC2 instance and I see a connection created by my machine. However, the connection eventually disappears and I get a 'channel 2: open failed: connect failed: Operation timed out' from my ssh tunnel. I've opened the jmx port through the security group and I've checked the port on the EC2 instance to make sure it's open (by telnet-ing to it). I'm not sure where to look next. Are there some properties in sshd_config or ssh_config I need to enable for tunneling? Or anything in Mac OS X? I feel like a serious noob but sys administration is really not my strong point. I've spent several hours and can't get this to work.

  Read the article

• Apache multiple vhost logs, stored locally and sent to remote logstash

  - by benbradley

  I'm investigating centralised logging and it seems there's so many different ways this can be done. I don't want to run logstash as a log "sender", preferring to keep the web servers as lean and simple possible. So that means either using syslog, syslog-ng or the one I'm testing now, rsyslog. But I would like to have separate vhost log files on the web server, in addition to these logs being sent to a remote log collector. I've tested rsyslog using the imfile module to watch the Apache log files, but this means I have to hard-code each vhost log file into my rsyslog.conf. Not ideal as people will invariably forget when they add/remove sites on the server. The reason I'm using rsyslog's imfile is that Apache doesn't appear to let you log to file and syslog. And I want to keep vhost-specific log files on the web server. So how can I do this? Is there a way of having rsyslog produce local log files and forward the logs to a remote collector? I am prepared to change my Apache config to log to a single access/error log for all vhosts, so long as there are vhost-specific log files produced somewhere on the web server machine. I just don't want to lose any logging info if the remote log collector can't be contacted for any reason. Any comments/suggestions? Cheers, B

  Read the article

• Computer resetting semi-randomly

  - by Peter

  Hi, I'm having a problem with my desktop whereby it sometimes resets itself semi-randomly. For example, I'll switch it on, it'll boot an OS and shortly after getting to the desktop it will immediately reset with no warning. The time isn't consistent - sometimes it does it before reaching login. I'm pretty sure it's not an OS thing; have tried Ubuntu and a Windows install and both exhibit it. It also doesn't appear to be heat-related because sometimes it appears to be able to "get past" it and will then run stably even under load; if anything it seems to be worse from a cold start. My gut feeling is some kind of power issue but I'm clutching at straws a little. Any suggestions on how I could go about testing it or trying to narrow the problem down would be appreciated. The machine is four years old now so while I can replace components if needed, it's not worth enough that I'm comfortable buying new parts without being pretty confident that they'll fix the problem. Thanks in advance for any help :) Edit: Okay, the motherboard is a MSI K8N SLI; CPU is an Athlon64 X2 4200+. Has one video card, a GeForce 7800GT. 1GB RAM, not sure of brand; 3 hard drives, two SATA and one PATA. Flashed motherboard to latest BIOS some time ago. Edit the Second: I thought I'd narrowed it down to the PSU for a while, but then it recurred again. I ended up pulling everything out but CPU, RAM and motherboard and it still seems to be stuffed (if anything, it's gotten worse in the last couple of days). I assume it's one of those three components, but the machine is old enough that I don't really want to spend money replacing any of them. So thanks for everyone's suggestions; much appreciated!

  Read the article

• How to configure a trusted connection between IIS 7 and SQL Server 2005?

  - by user1180652

  How do configure a trusted connection between IIS 7 and SQL Server 2005? My webapp was working fine with Windows Authentication enabled in IIS. Now, in order to solve a problem, we need to use a trusted connection. Unfortunately, enabling the trusted connection in the web.config broke the webapp. Oddly enough, when I run this application with trusted connection from my local dev machine (using the Cassini web server) IIS (Windows Server 2008) is running on one machine. The database (SQL Server 2005 but could migrate to 2008) is running on another machine. We are on a Windows domain running AD. All traffic is within our own firewall - no public access. Beyond that, I can't provide much info but I can find it. We're very "compartmentalized" (we have server people, security people, oracle people, SQL Server people, etc.) Thanks! Update 02/14/2012 0902: The webapp is now functional (app no longer broken) but the main issue is still unresolved. Now I have the app's application pool running as a domain account with permissions on the SQL Server box and IIS box. We were using this account to run the application but, and here's the problem, we need to log the real user name that made a change. When using the service account, the name of that service account appeared in the audit tables, making the auditing quite useless. So, not I'm at least running again. The connection string in the web.config is using "Trusted_Connection=True", the appPool is using a domain account with access to both boxes, BUT when I make a change (logged in as me) the name of the service account (appPool identity) is still logged in the audit tables. I also manually granted full permissions to the service account on the webapp folder. What do I need to do in order to log my name, not the service account, in the audit tables? Everything I'm reading says I need to establish a trusted connection between the two servers.

  Read the article

• SSD seems dead after wakeup from Windows Sleep, BIOS stalls but doesn't find it anymore

  - by Abel

  The morning, the following scary scenario happened: I woke up my Windows system Typed in my username and got an error (something like "could not load security xxx", but unsure of exact wording) System auto-restarted after cliking OK It didn't boot up anymore to the SSD with Windows 7 OS (I have another disk I can boot to, but that doesn't see the disk either). Obviously, this happened right after I instantiated a backup procedure, which hasn't succeeded either. The BIOS can't find the drive when I connect to SATA. And it can't find the drive when I connect it to SAS. I have a Dell Workstation T7400, most recent BIOS (version A06), version of SAS Host Bus Adapter BIOS (HBA) is MPTBIOS 6.14.10.00 (2007.09.29) from LSI Logic Corp. Other findings: When connecting to SATA, the DELL Logo screen stays really long (5 minutes) and then at the end of POST it says that a drive is not found When connecting to SAS, the SAS HBA initializing phase takes long (2 minutes, against normally 15 seconds) When running Dell Diagnostics, it doesn't finish and gives the error Exception occurred in module MPCACHE.MDM file "IOAPICSP.ASM" line 1645. I contacted Dell. On their advice I tried different slots and different cables to no avail. I use an APIC battery power, spikes in the power are thus unlikely. My conclusion so far: the disk is dead. I need this disk very badly because it contains the last few days of important development of which not all code was checked in the moment this happened. Are there any ways to recover dead SSD drives? The drive is a new X25-M G2 160GB model SSDSA2M160G2GC 2.5" in an extension bay and has been running without issues for 3 months on SAS.

  Read the article

• RDP problem with Vista and Windows 7 destination

  - by MadBison

  I use a server a home to host a bunch of concurrently running Hyper-V VM's with different OS's and software for testing. I have Vista on the laptop, all latest SP's and patches. The server is Server 2008 R2, fully patched. The guests are a mix of XP, Vista, Server 2008 and Windows 7. If I connect to the Win XP or Server 2008 guest using RDP, it is always good. Very quick, no speed issues. If I connect to the Vista or Win 7 guests, the response time is so slow it is unusable. Usually 6 or 8 seconds, and at times it is to long to measure! This happens from both the laptop running Vista, and the server running Server 2008 R2. Does anyone know what the issue is with RDP on Vista and Windows 7 destinations? I did read this: http://blog.tmcnet.com/blog/tom-keating/microsoft/remote-desktop-slow-problem-solved.asp and that is not the problem I have applied that change to all PC's.

  Read the article

• eAccelerator Issue - Cache Directory Empty.

  - by Tom

  Hi all, Hoping someone can give me a hand with this. I've recently installated eAccelerator 0.9.6.1 - On a CentOS LAMP server. Had it working fine, using the /tmp/accelerator as the cache directory. php.ini set up: zend_extension="/usr/local/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so" eaccelerator.shm_size="200" eaccelerator.cache_dir="/var/cache/eaccelerator" eaccelerator.enable="1" eaccelerator.optimizer="1" eaccelerator.check_mtime="1" eaccelerator.debug="0" eaccelerator.filter="" eaccelerator.shm_max="0" eaccelerator.shm_ttl="3600" eaccelerator.shm_prune_period="180" eaccelerator.shm_only="1" eaccelerator.compress="1" eaccelerator.compress_level="9" php -v output: PHP 5.2.12 (cli) (built: Feb 3 2010 00:34:28) Copyright (c) 1997-2009 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies with eAccelerator v0.9.6.1, Copyright (c) 2004-2010 eAccelerator, by eAccelerator with the ionCube PHP Loader v3.3.20, Copyright (c) 2002-2010, by ionCube Ltd. I had to remove the cache directory as I was testing something. Remade it, re-set permissions and found that eAccelerator was no longer creating cache files within the folder. I thought it might be down to ownership rights on the folder so chown'd it apache.apache and this made no difference. I recreated the directory in /var/cache instead and editted php.ini to point to the new cache dir location, chmod'd, chown'd etc. and still eAccelerator is not creating any of the cache files in the directory (just empty). Could someone suggest what I might be doing incorrectly here. I've read through numerous pages to try and troubleshoot the issue to no avail. Any help appreciated.

  Read the article

• Setting up a Network Bridge on Linux VM (Windows 7 Host)

  - by GrandAdmiral

  I would like to use NetEm to simulate a low bandwidth environment while testing an Internet-connected device. My plan is to setup a bridge in a Linux VM (Linux Mint 13) on a Windows 7 host. Unfortunately I'm having trouble setting up the bridge. Then I can use NetEm in the Linux VM to limit the bandwidth to an external device. I went with the following script: ifconfig eth0 0.0.0.0 promisc up ifconfig eth1 0.0.0.0 promisc up Then create the bridge and bring it up: brctl addbr br0 brctl setfd br0 0 brctl addif br0 eth0 brctl addif br0 eth1 dhclient br0 ifconfig br0 up When I run that script, I see the following warning: Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service smbd reload Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the reload(8) utility, e.g. reload smbd The device connecting to the bridge is able to obtain an IP Address, but it can only ping the IP Address of the bridge (both are 10.2.32.xx). Then after a few minutes, other parts of our network go down. I'm not sure why, but once I kill the bridge the network is fine. Is it possible to setup a network bridge in a Linux VM? Do I need to do something else with the dhclient br0 part of the script? By the way, I'm using VirtualBox. The wired connection is eth0 and the wireless connection is eth1. The wired connection is connecting to the device and the wireless connection is going to the network. Both adapters are set up as bridged adapters with promiscuous mode set to "allow all".

  Read the article

• administrator user unable to login, suspicious user accounts "sky$", "admin$"

  - by mks

  I have a Windows 2008 R2 Standard (64 bit) running in a virtual machine. Suddenly from yesterday onwards I am not able to login as administrator. Nobody changed the password. Both in the console as well as using remote desktop I am unable to login. Whenever I login as Administrator I am getting this error: "The user name or password is incorrect" Nothing has changed in the machine and I have logged in the past successfully both through console and via remote desktop several time on the same machine. One strange behaviour I noticed is, I am seeing some additional user accounts if I try to login as other user. The suspicious user account are: sky$ admin$ SUPPORT_388945a0 Is it created by some malware/virus? Or is it some windows hidden account? Microsoft site says that SUPPORT_388945a0 is: The Support_388945a0 account enables Help and Support Service interoperability with signed scripts. This account is primarily used to control access to signed scripts that are accessible from within Help and Support Services. Administrators can use this account to delegate the ability for an ordinary user, who does not have administrative access over a computer, to run signed scripts from links embedded within Help and Support Services. These scripts can be programmed to use the Support_388945a0 account credentials instead of the user’s credentials to perform specific administrative operations on the local computer that otherwise would not be supported by the ordinary user’s account. When the delegated user clicks on a link in Help and Support Services, the script executes under the security context of the Support_388945a0 account. This account has limited access to the computer and is disabled by default. However I am not sure from where this "admin$" and "sky$" came. Anyone has similar experience?

  Read the article

• How do i set up a fully featured small business network?

  - by JoshReedSchramm

  This has the possibility to be a very large question but I recently acquired a few rack mount servers and the hardware necessary to run them. Unfortunately I'm a programmer with very little understanding of how to set up a good working network so I'm hoping someone on here might be able to help. What I want to do is run a domain with a series of subdomains which would all be externally accessible. The setup would live inside my home and my internet connection is your run of the mill cable model (which means a dynamic IP) I want to be able to set up a couple site, specifically: www.mycompany.com (mycompany.com with no subdomain would redirect to this) build.mycompany.com (for my continuous integration server) ruby.mycompany.com (for ruby projects) win.mycompany.com (for windows project) etc. Additionally this is still my home network so our personal machines need to be able to get on via wifi with at least the same security we have now through an out of the box router from best buy. I'm thinking i need a DNS server, DHCP server and one of those would run either no-ip or dyndns to accommodate the dynamic ip. I don't necessarily need mail but it might be helpful to have some sort of mail server i could use for testing, it doesn't need to get out to the greater internet though. So how do i set up this kinda of network? tl;dr Need to know how to set up your standard office style network in my home off my normal consumer level cable modem connection.

  Read the article

• Allow incoming connections on Windows Server 2008 R2

  - by Richard-MX

  Good day people. First, im new to Windows Server. I've always used Linux/Apache combo, but, my client has and AWS EC2 Windows Server 2008 R2 instance and he wants everything in there. Im working with IIS and PHP enabled as Fast-CGI and everything is working, but, i cant see the websites stored in it from internet. The public DNS that AWS gave us for that instance is: http://ec2-XX-XXX-XXX-121.us-west-2.compute.amazonaws.com/ But, if i copy paste that address, i get nothing, no IIS logo or something like that. My common sense tells me that maybe the firewall could be blocking the access. Can anyone help me and tell where to enable some rules to get this thing working? I don't wanna start enabling rules at random and make the system insecure. If you need any additional info, you can ask me and i will provide it. Thanks in advance. UPDATE: Amazon EC2 display this: Public DNS: ec2-XX-XXX-XXX-121.us-west-2.compute.amazonaws.com Private DNS: ip-XX-XXX-XX-252.us-west-2.compute.internal Private IPs: XX.XXX.XX.25 In my test microinstance, i just to use the Public DNS address (the one that starts with "ec2") and it works like a charm (of course, the micro instance have its own Public DNS im not assuming same address for both instances...) However, for the large instance, i tried to do the same. Set up everything as in the micro instance but if i use the Public DNS, it doesnt load anything. Im suspicious about the Windows Firewall, but, the HTTP related stuff is enabled. What should i do to get access to the large instance? I don't want to set up the domain yet, i want access from an amazon url. 2ND EDIT: all fixed. Charles pointed that maybe Security Groups was not properly set up for the instance. He was right. Just added HTTP service to the rules and all works good.

  Read the article

• Active Directory Child Domain Replication Problems

  - by MikeR

  Hi, I've recently inherited an Active Directory (all DCs Windows 2003) which has been configured with several child domains that are used as test environments for out CRM software. Two of these child domains have been used for testing using dates in the future (2015), throwing them well outside of the Kerberos tolerance for time, and they're flooding my event logs with replication errors such as the following: Description: The attempt to establish a replication link for the following writable directory partition failed. Directory partition: CN=Schema,CN=Configuration,DC=ad,DC=xxxxxxx,DC=com Source domain controller: CN=NTDS Settings,CN=TESTDC001,CN=Servers,CN=SiteName,CN=Sites,CN=Configuration,DC=ad,DC=xxxxxxx,DC=com Source domain controller address: 38e95b2a-35af-4174-84ba-9ab039528cce._msdcs.ad.xxxxxxx.com Intersite transport (if any): This domain controller will be unable to replicate with the source domain controller until this problem is corrected. User Action Verify if the source domain controller is accessible or network connectivity is available. Additional Data Error value: 5 Access is denied. I'd also like to upgrade to Windows 2008 at some point, but wouldn't want to attempt any schema updates while I'm not 100% confident on the replication. I'm guessing my only real solution will be to get rid of these child domains. The child domains are operating as stand alone domains, the DC is up and running and authenticating test users fine. I'm guessing the best solution to this would be to delete the domains (although I'd be happily told otherwise). The clock forwarding appears to have been happening for several years, so I'm assuming I can't just put the clock right (I'm guessing scope for this would be 180days, the same as the tombstone lifetime) With the replication errors would I be able to dcpromo the child domains DC, select it as the last domain controller in the domain and the child domain would be deleted? Or would I be better off treating the domain as an orphaned domain and use Microsoft's instructions to clear up as such. Any advice would be much appreciated.

  Read the article

• su not giving proper message for restricted LDAP groups

  - by user1743881

  I have configured PAM authentication on Linux box to restrict particular group only to login. I have enabled pam and ldap through authconfig and modified access.conf like below, [root@test root]# tail -1 /etc/security/access.conf - : ALL EXCEPT root test-auth : ALL Also modified sudoers file, to get su for this group <code> [root@test ~]# tail -1 /etc/sudoers %test-auth ALL=/bin/su</code> Now, only this ldap group members can login to system. However when from any of this authorized user, I tried for su, it asks for password and then though I enter correct password it gives message like Incorrect password and login failed. /var/log/secure shows that user is not having permission to get the access, but then it should print message like Access denied.The way it prints for console login. My functionality is working but its no giving proper messages. Could anyone please help on this. My /etc/pam.d/su file, [root@test root]# cat /etc/pam.d/su #%PAM-1.0 auth sufficient pam_rootok.so # Uncomment the following line to implicitly trust users in the "wheel" group. #auth sufficient pam_wheel.so trust use_uid # Uncomment the following line to require a user to be in the "wheel" group. #auth required pam_wheel.so use_uid auth include system-auth account sufficient pam_succeed_if.so uid = 0 use_uid quiet account include system-auth password include system-auth session include system-auth session optional pam_xauth.so

  Read the article

• How to find process that's using 100% of CPU

  - by Gabriel

  As i'm looking at htop and top i see that my processor usage is 100% allways. But i can not see any process that is using that much CPU. Htop shows me only 1-2 processes that use around 5% cpu time. Is there a way to find the processes that use that much cpu time? Here is the output of ps -eo pcpu,pid,user,args | sort -r -k1 | less %CPU PID USER COMMAND 0.8 20413 root jsvc.exec -user tomcat -cp ./bootstrap.jar -Djava.endorsed.dirs=../common/endorsed -outfile ../logs/catalina.out -errfile ../logs/catalina.err -verbose org.apache.catalina.startup.Bootstrap -security 0.3 631 mysql /usr/sbin/mysqld --basedir=/ --datadir=/var/lib/mysql --user=mysql --pid-file=/var/lib/mysql/mysql.pid --skip-external-locking 0.2 3380 root /usr/local/apache/bin/httpd -k restart -DSSL 0.2 24698 root tailwatchd 0.2 22472 root /usr/local/jdk/bin/java -Djava.util.logging.config.file=/usr/local/jakarta/tomcat/conf/logging.properties -Dfile.encoding=UTF8 -XX:MaxPermSize=128m -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Djava.endorsed.dirs=/usr/local/jakarta/tomcat/common/endorsed -classpath /usr/local/jakarta/tomcat/bin/bootstrap.jar -Dcatalina.base=/usr/local/jakarta/tomcat -Dcatalina.home=/usr/local/jakarta/tomcat -Djava.io.tmpdir=/usr/local/jakarta/tomcat/temp org.apache.catalina.startup.Bootstrap start 0.1 32095 root cpanellogd - processing bandwidth 0.0 9733 root sleep 1m

  Read the article

< Previous Page | 708 709 710 711 712 713 714 715 716 717 718 719  | Next Page >