Search Results

Search found 35354 results on 1415 pages for 'joe even'.

Page 713/1415 | < Previous Page | 709 710 711 712 713 714 715 716 717 718 719 720  | Next Page >

• Subdomain still times out after being set up a month ago

  - by user8137

  I would like to use the subdomain www.high-res.domain.com to be accessed by external customers with specific permissions to access the site (like FTP). We use Network Solutions to house domain.com. We recently added a new IP address to point to www.high-res.domain.com. I gave the IP address to the company that hosts our website. I pinged www.high-res.domain.com and it points to the correct IP address but still times out. It’s been a few weeks now and when you ping it, it still times out. C:\>ping XXX.XXX.X.XXX Pinging XXX.XXX.X.XXX with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for XXX.XXX.X.XXX: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss). tracert times out as well. I even went to DNS tools and a few other sites for checking this and it shows the same thing. I recently went into the DNSmgmt on our server (wink2k3sp1) and created an A record under the DomainDnsZones which translated to a CNAME when you look at it. Under the domain it has two entries, one to the subdomain and the other to the website host. Each has separate IP addresses. Is this correct?

  Read the article

• How to visually "connect" skybox edges with terrain model

  - by David

  I'm working on a simple airplane game where I use skybox cube rendered using disabled depth test. Very close to the bottom side of the skybox is my terrain model. What bothers me is that the terrain is not connected to the skybox bottom. This is not visible while the plane flies low, but as it gets some altitude, the terrain looks smaller because of the perspective. Since the skybox center is always same as the camera position, the skybox moves with the plane, but the terrain goes into the distance. Ok, I think you understand the problem. My question is how to fix it. It's an airplane game so limiting max altitude is not possible. I thought about some way to stretch terrain to always cover whole bottom side of the skybox cube, but that doesn't feel right and I don't even know how would I calculate new terrain dimensions every frame. Here are some screenshot of games where you can clearly see the problem: (oops, I cannot post images yet) darker brown is the skybox bottom here: http://i.stack.imgur.com/iMsAf.png untextured brown is the skybox bottom here: http://i.stack.imgur.com/9oZr7.png

  Read the article

• Share on: FB, Tweet, Digg, Linkedin, Delicious, My mother, ... it's just on fashion, or some real value?

  - by Marco Demaio

  Nowadays your site is not in fashion if you don't show at least a couple of share buttons like these: Is this just fashion, or do people actually get something good out of it? When I say "something good" I mostly mean something that you could measure, and not just the feeling that was good. Maybe I can better explain with an example: did you notice (in some way) that many people clicked on those links to share your page/s on those web 2.0 social sites? And in such a case on which social networks did you see they mostly share your pages? BTW I'm not talking about Google PR, i know all web 2.0 social sites use nofollow everywhere and even hidden links, so they are useless by themselves for PR. UPDATE: According to this video, Google's Alter Ego says that they now use in some way data from social sites in ranking. If this is true, it's obvious that the Share on button for FB, Tweet, etc are definitely of some values. But again my question is more about what you noticed in your real experience to be a direct benefit of adding those type of "Share On" links on your webisite? I.e. did you see more traffic coming in form FB, or some users who bought your products because of FB or Twitter? Or any other benefits? Thanks

  Read the article

• Breadcrumbs in a modern web application, make sense? [on hold]

  - by Xtreme Biker

  I'm currently beginning with the development of a new web application. The whole web application is going to be bookmarkable and all the pages accesible via GET requests and url parameters. Having said that, let's suppose I've got three entities in my application, Customer, Team and City. Each Customer and Team belong to a city and I've got a city-detail page which displays the detail for a concrete city. So next navigation cases are possible: Customers - Customer detail (id=2) - City detail (id=3) Football teams - Team detail (id=5) - City detail (id=3) Cities - City detail (id=3) There are three possible ways of ending up in a city detail view. My question is, does it make sense to implement a breadcrumb to show such a history, having it available in the browser itself? Would it be more appropiate to show a breadcrumb with the last case, no matter where we're coming from (hierarchical breadcrumb)? That's what Jakob Nielsen points out here: Offering users a Hansel-and-Gretel-style history trail is basically useless, because it simply duplicates functionality offered by the Back button, which is the Web’s second-most-used feature. A history trail can also be confusing: users often wander in circles or go to the wrong site sections. Having each point in a confused progression at the top of the current page doesn’t offer much help. Finally, a history trail is useless for users who arrive directly at a page deep within the site. Also, even if the history trail seems the most natural way to implement it, it requires an extra effort to keep the whole track being HTTP a stateless mean.

  Read the article

• Parallelize incremental processing in Tabular #ssas #tabular

  - by Marco Russo (SQLBI)

  I recently came in a problem trying to improve the parallelism of Tabular processing. As you know, multiple tables can be processed in parallel, whereas the processing of several partitions within the same table cannot be parallelized. When you perform an incremental update by adding only new rows to existing table, what you really do is adding rows to a partition, so adding rows to many tables means adding rows to several partitions. The particular condition you have in this case is that every partition in which you add rows belongs to a different table. Adding rows implies using the ProcessAdd command; its QueryBinding parameter specifies a SQL syntax to read new rows, otherwise the original query specified for the partition will be used, and it could generate duplicated data if you don’t have a dynamic behavior on the SQL side. If you create the required XMLA code manually, you will find that the QueryBinding node that should be part of the ProcessAdd command has to be moved out from ProcessAdd in case you are using a Batch command with more than one Process command (which is the reason why you want to use a single batch: run multiple process operations in parallel!). If you use AMO (Analysis Management Objects) you will find that this combination is not supported, even if you don’t have a syntax error compiling the code, but you might obtain this error at execution time: The syntax for the 'Process' command is incorrect. The 'Bindings' keyword cannot appear under a 'Process' command if the 'Process' command is a part of a 'Batch' command and there are more than one 'Process' commands in the 'Batch' or the 'Batch' command contains any out of line related information. In this case, the 'Bindings' keyword should be a part of the 'Batch' command only. If this is happening to you, the best solution I’ve found is manipulating the XMLA code generated by AMO moving the Binding nodes in the right place. A more detailed description of the issue and the code required to send a correct XMLA batch to Analysis Services is available in my article Parallelize ProcessAdd with AMO. By the way, the same technique (and code) can be used also if you have the same problem in a Multidimensional model.

  Read the article

• Best practices for using namespaces in C++.

  - by Dima

  I have read Uncle Bob's Clean Code a few months ago, and it has had a profound impact on the way I write code. Even if it seemed like he was repeating things that every programmer should know, putting them all together and putting them into practice does result in much cleaner code. In particular, I found breaking up large functions into many tiny functions, and breaking up large classes into many tiny classes to be incredibly useful. Now for the question. The book's examples are all in Java, while I have been working in C++ for the past several years. How would the ideas in Clean Code extend to the use of namespaces, which do not exist in Java? (Yes, I know about the Java packages, but it is not really the same.) Does it make sense to apply the idea of creating many tiny entities, each with a clearly define responsibility, to namespaces? Should a small group of related classes always be wrapped in a namespace? Is this the way to manage the complexity of having lots of tiny classes, or would the cost of managing lots of namespaces be prohibitive?

  Read the article

• Interfaces and Virtuals Everywhere????

  - by David V. Corbin

  First a disclaimer; this post is about micro-optimization of C# programs and does not apply to most common scenarios - but when it does, it is important to know. Many developers are in the habit of declaring member virtual to allow for future expansion or using interface based designs1. Few of these developers think about what the runtime performance impact of this decision is. A simple test will show that this decision can have a serious impact. For our purposes, we used a simple loop to time the execution of 1 billion calls to both non-virtual and virtual implementations of a method that took no parameters and had a void return type: Direct Call:     1.5uS Virtual Call:   13.0uS The overhead of the call increased by nearly an order of magnitude! Once again, it is important to realize that if the method does anything of significance then this ratio drops quite quickly. If the method does just 1mS of work, then the differential only accounts for a 1% decrease in performance. Additionally the method in question must be called thousands of times in order to produce a meaqsurable impact at the application level. Yet let us consider a situation such as the per-pixel processing of a graphics processing application. Here we may have a method which is called millions of times and even the slightest increase in overhead can have significant ramification. In this case using either explicit virtuals or interface based constructs is likely to be a mistake. In conclusion, good design principles should always be the driving force behind descisions such as these; but remember that these decisions do not come for free.   1) When a concrete class member implements an interface it does not need to be explicitly marked as virtual (unless, of course, it is to be overriden in a derived concerete class). Nevertheless, when accessed via the interface it behaves exactly as if it had been marked as virtual.

  Read the article

• Finish feature reverted commits from develop

  - by marco-fiset

  I am using git as a version control system, and using git-flow as the branching model. I started a feature branch some weeks ago in order to maintain the system in a clean state while developping that feature. The main development continued on the develop branch, and changes from develop were merged periodically into the feature, to keep it up to date as much as possible. However came the time where the feature was finished, and I used git-flow's finish feature to merge the feature back into develop. The merge was successfully done, but then I found out that some of the commits I made in develop were reverted by the merge commit! Nowhere in develop or in the feature branch were these changes reverted, I can't see any commit that overwrote them. I just can't find anything. The only theory I have for the moment is that git is failing on me, but that would be extremely unlikely. Maybe I did some kind of wrong manipulation that made this situation come true? I can trace back in the history when the commit was made. I can see that the changes from that commit were reverted by the merge commit. Nowhere in the branch I see a commit that reverts those changes. Yet they were reverted. How is this even possible?

  Read the article

• Quick Question, robots.txt Disallow: /*/ does what exactly?

  - by Exit

  A SEO firm suggested changing the robots.txt to: User-agent: * Disallow: /*/ Allow: /ims/ I'm not sure what that would do, but my guess is that is would tell all robots to index nothing but the ims folder. I understand the wildcard, but I'm confused by the slashes and don't know how they would play out in conjunction with the wildcard. * Update * I didn't mention that there is a sitemap listed in the robots.txt file, but according to one tech blogger, he realized that sitemaps trump robots exclusions. So, even though this says in Google Webmaster Tools that everything with a trailing slash will not be indexed, the sitemap contains the important links. I did notice that the link count on Google went from 360 to 336, and the sitemap links under the URL scaled back to 3 from 6. I'm not sure the cause or what links were removed, though. Perhaps it cleaned out garbage. I'm still clueless why they would add in 'Allow: /ims/', that seems pointless. And a quick list of what would index according to the robots rules above (withouth the sitemap) using /*/: domain.com Indexed domain.com/page.html Indexed domain.com/folder/ Not Indexed domain.com/folder/page.html Not Indexed

  Read the article

• Avoiding the Anaemic Domain - How to decide what single responsibility a class has

  - by thecapsaicinkid

  Even after reading a bunch I'm still falling into the same trap. I have a class, usually an enity. I need to implement more than one, similar operations on this type. It feels wrong to (seemingly arbitrarily) choose one of these operations to belong inside the entity and push the others out to a separate class; I end up pushing all operations to service classes and am left with an anaemic domain. As a crude example, imagine the typical Employee class with numeric properties to hold how many paid days the employee is entitled to for both sickness and holiday and a collection of days taken for each. public class Employee { public int PaidHolidayAllowance { get; set; } public int PaidSicknessAllowance { get; set; } public IEnumerable<Holiday> Holidays { get; set; } public IEnumerable<SickDays> SickDays { get; set; } } I want two operations, one to calculate remaining holiday, another for remaining paid sick days. It seems strange to include say, CalculateRemaingHoliday() in the Employee class and bump CalculateRemainingPaidSick() to some PaidSicknessCalculator class. I would end up with a PaidSicknessCalculator and a RemainingHolidayCalculator and the anaemic Employee entity as seen above. The other alternative would be to put both operations in the Employee class and kick Single Responsibility to the curb. That doesn't make for particularly maintainable code. I suppose the Employee class should have some initialisation/validation logic (not accepting negative alowances etc.) So maybe I just stick to basic initialisation and validation in the entities themselves and be happy with my separate calculator classes. Or maybe I should be asking myself if Anaemic Domain is actually causing me some tangible problems with my code.

  Read the article

• How AlphaBlend Blendstate works in XNA 4 when accumulighting light into a RenderTarget?

  - by cubrman

  I am using a Deferred Rendering engine from Catalin Zima's tutorial: His lighting shader returns the color of the light in the rgb channels and the specular component in the alpha channel. Here is how light gets accumulated: Game.GraphicsDevice.SetRenderTarget(LightRT); Game.GraphicsDevice.Clear(Color.Transparent); Game.GraphicsDevice.BlendState = BlendState.AlphaBlend; // Continuously draw 3d spheres with lighting pixel shader. ... Game.GraphicsDevice.BlendState = BlendState.Opaque; MSDN states that AlphaBlend field of the BlendState class uses the next formula for alphablending: (source × Blend.SourceAlpha) + (destination × Blend.InvSourceAlpha), where "source" is the color of the pixel returned by the shader and "destination" is the color of the pixel in the rendertarget. My question is why do my colors are accumulated correctly in the Light rendertarget even when the new pixels' alphas equal zero? As a quick sanity check I ran the following code in the light's pixel shader: float specularLight = 0; float4 light4 = attenuation * lightIntensity * float4(diffuseLight.rgb,specularLight); if (light4.a == 0) light4 = 0; return light4; This prevents lighting from getting accumulated and, subsequently, drawn on the screen. But when I do the following: float specularLight = 0; float4 light4 = attenuation * lightIntensity * float4(diffuseLight.rgb,specularLight); return light4; The light is accumulated and drawn exactly where it needs to be. What am I missing? According to the formula above: (source x 0) + (destination x 1) should equal destination, so the "LightRT" rendertarget must not change when I draw light spheres into it! It feels like the GPU is using the Additive blend instead: (source × Blend.One) + (destination × Blend.One)

  Read the article

• Desktop Fun: Triple Monitor Wallpaper Collection Series 2

  - by Asian Angel

  Recently we shared the first batch in a series of wallpaper collections focused exclusively on triple monitor setups with you. Today we have our second offering in the series filled with all new wallpaper goodness to help make your monitors a joy to look at once again. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution. Special Notes Regarding This Collection: The website lists the following resolutions as available for backgrounds: 3072*768, 3456*864, 3840*800, 3840*960, 3840*1024, 4080*768, 4098*768, 4320*900, 4800*900, 4800*1200, 5040*1050, 5760*1080, 5760*1200, and 7680*1600. Keep in mind that the largest image size we were able to download was 5120*1600 pixels even though “5760*1080, 5760*1200, and 7680*1600″ were listed. Use the “Click here to change resolution preferences” link at the top of each page to select the size best suited to your monitors before downloading. The easiest way to save these images is to right click on the previews and select “Save As”. Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Sync Your Windows Computer with Your Ubuntu One Account [Desktop Client] Awesome 10 Meter Curved Touchscreen at the University of Groningen [Video] TV Antenna Helper Makes HDTV Antenna Calibration a Snap Turn a Green Laser into a Microscope Projector [Science] The Open Road Awaits [Wallpaper] N64oid Brings N64 Emulation to Android Devices

  Read the article

• ASMLib

  - by wcoekaer

  Oracle ASMlib on Linux has been a topic of discussion a number of times since it was released way back when in 2004. There is a lot of confusion around it and certainly a lot of misinformation out there for no good reason. Let me try to give a bit of history around Oracle ASMLib. Oracle ASMLib was introduced at the time Oracle released Oracle Database 10g R1. 10gR1 introduced a very cool important new features called Oracle ASM (Automatic Storage Management). A very simplistic description would be that this is a very sophisticated volume manager for Oracle data. Give your devices directly to the ASM instance and we manage the storage for you, clustered, highly available, redundant, performance, etc, etc... We recommend using Oracle ASM for all database deployments, single instance or clustered (RAC). The ASM instance manages the storage and every Oracle server process opens and operates on the storage devices like it would open and operate on regular datafiles or raw devices. So by default since 10gR1 up to today, we do not interact differently with ASM managed block devices than we did before with a datafile being mapped to a raw device. All of this is without ASMLib, so ignore that one for now. Standard Oracle on any platform that we support (Linux, Windows, Solaris, AIX, ...) does it the exact same way. You start an ASM instance, it handles storage management, all the database instances use and open that storage and read/write from/to it. There are no extra pieces of software needed, including on Linux. ASM is fully functional and selfcontained without any other components. In order for the admin to provide a raw device to ASM or to the database, it has to have persistent device naming. If you booted up a server where a raw disk was named /dev/sdf and you give it to ASM (or even just creating a tablespace without asm on that device with datafile '/dev/sdf') and next time you boot up and that device is now /dev/sdg, you end up with an error. Just like you can't just change datafile names, you can't change device filenames without telling the database, or ASM. persistent device naming on Linux, especially back in those days ways to say it bluntly, a nightmare. In fact there were a number of issues (dating back to 2004) : Linux async IO wasn't pretty persistent device naming including permissions (had to be owned by oracle and the dba group) was very, very difficult to manage system resource usage in terms of open file descriptors So given the above, we tried to find a way to make this easier on the admins, in many ways, similar to why we started working on OCFS a few years earlier - how can we make life easier for the admins on Linux. A feature of Oracle ASM is the ability for third parties to write an extension using what's called ASMLib. It is possible for any third party OS or storage vendor to write a library using a specific Oracle defined interface that gets used by the ASM instance and by the database instance when available. This interface offered 2 components : Define an IO interface - allow any IO to the devices to go through ASMLib Define device discovery - implement an external way of discovering, labeling devices to provide to ASM and the Oracle database instance This is similar to a library that a number of companies have implemented over many years called libODM (Oracle Disk Manager). ODM was specified many years before we introduced ASM and allowed third party vendors to implement their own IO routines so that the database would use this library if installed and make use of the library open/read/write/close,.. routines instead of the standard OS interfaces. PolyServe back in the day used this to optimize their storage solution, Veritas used (and I believe still uses) this for their filesystem. It basically allowed, in particular, filesystem vendors to write libraries that could optimize access to their storage or filesystem.. so ASMLib was not something new, it was basically based on the same model. You have libodm for just database access, you have libasm for asm/database access. Since this library interface existed, we decided to do a reference implementation on Linux. We wrote an ASMLib for Linux that could be used on any Linux platform and other vendors could see how this worked and potentially implement their own solution. As I mentioned earlier, ASMLib and ODMLib are libraries for third party extensions. ASMLib for Linux, since it was a reference implementation implemented both interfaces, the storage discovery part and the IO part. There are 2 components : Oracle ASMLib - the userspace library with config tools (a shared object and some scripts) oracleasm.ko - a kernel module that implements the asm device for /dev/oracleasm/* The userspace library is a binary-only module since it links with and contains Oracle header files but is generic, we only have one asm library for the various Linux platforms. This library is opened by Oracle ASM and by Oracle database processes and this library interacts with the OS through the asm device (/dev/asm). It can install on Oracle Linux, on SuSE SLES, on Red Hat RHEL,.. The library itself doesn't actually care much about the OS version, the kernel module and device cares. The support tools are simple scripts that allow the admin to label devices and scan for disks and devices. This way you can say create an ASM disk label foo on, currently /dev/sdf... So if /dev/sdf disappears and next time is /dev/sdg, we just scan for the label foo and we discover it as /dev/sdg and life goes on without any worry. Also, when the database needs access to the device, we don't have to worry about file permissions or anything it will be taken care of. So it's a convenience thing. The kernel module oracleasm.ko is a Linux kernel module/device driver. It implements a device /dev/oracleasm/* and any and all IO goes through ASMLib - /dev/oracleasm. This kernel module is obviously a very specific Oracle related device driver but it was released under the GPL v2 so anyone could easily build it for their Linux distribution kernels. Advantages for using ASMLib : A good async IO interface for the database, the entire IO interface is based on an optimal ASYNC model for performance A single file descriptor per Oracle process, not one per device or datafile per process reducing # of open filehandles overhead Device scanning and labeling built-in so you do not have to worry about messing with udev or devlabel, permissions or the likes which can be very complex and error prone. Just like with OCFS and OCFS2, each kernel version (major or minor) has to get a new version of the device drivers. We started out building the oracleasm kernel module rpms for many distributions, SLES (in fact in the early days still even for this thing called United Linux) and RHEL. The driver didn't make sense to get pushed into upstream Linux because it's unique and specific to the Oracle database. As it takes a huge effort in terms of build infrastructure and QA and release management to build kernel modules for every architecture, every linux distribution and every major and minor version we worked with the vendors to get them to add this tiny kernel module to their infrastructure. (60k source code file). The folks at SuSE understood this was good for them and their customers and us and added it to SLES. So every build coming from SuSE for SLES contains the oracleasm.ko module. We weren't as successful with other vendors so for quite some time we continued to build it for RHEL and of course as we introduced Oracle Linux end of 2006 also for Oracle Linux. With Oracle Linux it became easy for us because we just added the code to our build system and as we churned out Oracle Linux kernels whether it was for a public release or for customers that needed a one off fix where they also used asmlib, we didn't have to do any extra work it was just all nicely integrated. With the introduction of Oracle Linux's Unbreakable Enterprise Kernel and our interest in being able to exploit ASMLib more, we started working on a very exciting project called Data Integrity. Oracle (Martin Petersen in particular) worked for many years with the T10 standards committee and storage vendors and implemented Linux kernel support for DIF/DIX, data protection in the Linux kernel, note to those that wonder, yes it's all in mainline Linux and under the GPL. This basically gave us all the features in the Linux kernel to checksum a data block, send it to the storage adapter, which can then validate that block and checksum in firmware before it sends it over the wire to the storage array, which can then do another checksum and to the actual DISK which does a final validation before writing the block to the physical media. So what was missing was the ability for a userspace application (read: Oracle RDBMS) to write a block which then has a checksum and validation all the way down to the disk. application to disk. Because we have ASMLib we had an entry into the Linux kernel and Martin added support in ASMLib (kernel driver + userspace) for this functionality. Now, this is all based on relatively current Linux kernels, the oracleasm kernel module depends on the main kernel to have support for it so we can make use of it. Thanks to UEK and us having the ability to ship a more modern, current version of the Linux kernel we were able to introduce this feature into ASMLib for Linux from Oracle. This combined with the fact that we build the asm kernel module when we build every single UEK kernel allowed us to continue improving ASMLib and provide it to our customers. So today, we (Oracle) provide Oracle ASMLib for Oracle Linux and in particular on the Unbreakable Enterprise Kernel. We did the build/testing/delivery of ASMLib for RHEL until RHEL5 but since RHEL6 decided that it was too much effort for us to also maintain all the build and test environments for RHEL and we did not have the ability to use the latest kernel features to introduce the Data Integrity features and we didn't want to end up with multiple versions of asmlib as maintained by us. SuSE SLES still builds and comes with the oracleasm module and they do all the work and RHAT it certainly welcome to do the same. They don't have to rebuild the userspace library, it's really about the kernel module. And finally to re-iterate a few important things : Oracle ASM does not in any way require ASMLib to function completely. ASMlib is a small set of extensions, in particular to make device management easier but there are no extra features exposed through Oracle ASM with ASMLib enabled or disabled. Often customers confuse ASMLib with ASM. again, ASM exists on every Oracle supported OS and on every supported Linux OS, SLES, RHEL, OL withoutASMLib Oracle ASMLib userspace is available for OTN and the kernel module is shipped along with OL/UEK for every build and by SuSE for SLES for every of their builds ASMLib kernel module was built by us for RHEL4 and RHEL5 but we do not build it for RHEL6, nor for the OL6 RHCK kernel. Only for UEK ASMLib for Linux is/was a reference implementation for any third party vendor to be able to offer, if they want to, their own version for their own OS or storage ASMLib as provided by Oracle for Linux continues to be enhanced and evolve and for the kernel module we use UEK as the base OS kernel hope this helps.

  Read the article

• Demantra 7.3.1.3 Controlling MDP_MATRIX Combinations Assigned to Forecasting Tasks Using TargetTaskSize

  - by user702295

  New 7.3.1.3 parameter: TargetTaskSize Old parameter: BranchID  Multiple, deprecated  7.3.1.3 onwards Parameter Location: Parameters > System Parameters > Engine > Proport   Default: 0   Engine Mode: Both   Details: Specifies how many MDP_MATRIX combinations the analytical engine attempts to assign to each forecasting task.  Allocation will be affected by forecsat tree branch size.  TaskTargetSize is automcatically calculated.  It holds the perferred branch size, in number of combinations in the lowest level. This parameter is adjusted to a lower value for smaller schemas, depending on the number of available engines.   - As the forecast is generated the engine goes up the tree using max_fore_level and not top_level -1.  Max_fore_level has     to be less than or equal to top_level -1.  Due to this requirement, combinations falling under the same top level -1     member must be in the same task.  A member of the top level -1 of the forecast tree is known as a branch.  An engine     task is therefore comprised of one or more branches.     - Reveal current task size       go to Engine Administrator --> View --> Branch Information and run the application on your Demantra schema.  This will be deprecated in 7.3.1.3 since there is no longer a means of adjusting the brach size directly.  The focus is now on proper hierarchy / forecast design.     - Control of tasks       The number of tasks created is the lowest of number of branches, as defined by top level -1 members in forecast       tree, and engine sessions and the value of TargetTaskSize.  You are used to using the branch multiplier in this       calculation.  As of 7.3.1.3, the branch ID multiple is deprecated.     - Discovery of current branch size       To resolve this you must review the 2nd highest level in the forecast tree (below highest/highest) as this is the       level which determines the size of the branches.  If a few resulting tasks are too large it is recommended that       the forecast tree level driving branches be revised or at times completely removed from the forecast tree.     - Control of foreacast tree branch size         - Run the following sql to determine how even the branches are being split by the engine:             select count(*),branch_id from mdp_matrix where prediction_status = 1 and do_fore = 1 group by branch_id;             This will give you an understanding if some of the individual branches have an unusually large number of           rows and thus might indicate that the engine is not efficiently dividing up the parallel tasks.         - Based on the results of this sql, we may want to adjust the branch id multiplier and/or the number of engines           (both of these settings are found in the Engine Administrator)           select count(*), level_id from mdp_matrix where prediction_status = 1 and do_fore = 1 group by level_id;           This will give us an understanding at which level of the Forecast tree where the forecast is being generated.            Having a majority of combinations higher on the forecast tree might indicate either a poorly designed forecast           tree and/or engine parameters that are too strict           Based on the results of this we would adjust the Forecast Tree to see if choosing a different hierarchy might           produce a forecast, with more combinations, at a lower level.           For example:             - Review the 2nd highest level in the forecast tree, below highest/highest, as this is the level which               determines the size of the branches.             - If a few resulting tasks are too large it is recommended that the forecast tree level driving branches               be revised or at times completely removed from the forecast tree.               - For example, if the highest level of the forecast tree is set to Brand/All Locations.             - You have 10 brands but 2 of the brands account for 67% and 29% of all combinations.             - There is a distinct possibility that the tasks resulting from these 2 branches will be too large for               a single engine to process.  Some possible solutions could be to remove the Brand level and instead               use a different product grouping which has a more even distribution, possibly Product Group.               - It is also possible to add a location dimension to this forecast tree level, for example Customer.                This will also reduce forecast tree branch size and will deliver a balanced task allocation.             - A correctly configured Forecast Tree is something that is done by the Implementation team and is               not the responsibility of Oracle Support.  Allocation will be affected by forecast tree branch size.  When TargetTaskSize is set to 0, the default value, the system automatically calculates a value for 'TargetTaskSize' depending on the number of engines.   - QUESTION:  Does this mean that if TargetTaskSize is 1, we use tree branch size to allocate branches to tasks instead                of automatically calculating the size?     ANSWER: DEV Strongly recommends that the setting of TargetTaskSize remain at the DEFAULT of ZERO (0).   - How to control the number of engines?     Determine how many CPUs are on the machine(s) that is (are) running the engine.  As mentioned earlier, the general     rule is that you should designate 2 engines per each CPU that is available.  So for example, if you are running the     engine on a machine that has 4 CPU then you can have up to 8 engines designated in the Engine Administrator.  In this     type of architecture then instead of having one 'localhost' in your Engine Settings Screen, you would have 'localhost'     repeated eight times in this field.     Where do I set the number of engines?                 To add multiples computers where engine will run, please do a back-up of Settings.xml file under         Analytical Engines\bin\ folder, then edit it and add there the selected machines.                 Example, this will allow 3 engines to start:         - <Entry>           <Key argument="ComputerNames" />           <Value type="string" argument="localhost,localhost,localhost" />           </Entry Otherwise, if there are no additional engines defined, the calculated value of 'TargetTaskSize' is used. (Oracle does not recommend changing the default value.) The TargetTaskSize holds the engines prefered branch size, in number of level 1 combinations.   - Level 1 combinations, known as group size The engine manager will use this parameter to attempt creating branches with similar size.   * The engine manager will not create engines that do not have a branch. The engine divider algorithm uses the value of 'TargetTaskSize' as a system-preferred branch size to create branches that are more equal in size which improves engine performance.  The engine divider will try to add as many tasks as possible to an existing branch, up to the limit of 'TargetTaskSize' level 1 combinations, before adding new branches. Coming up next: - The engine divider - Group size - Level 1 combinations - MAX_FORE_LEVEL - Engine Parameters  

  Read the article

• How can you Add Value to your Mobile Apps?

  - by Carlos Chang

  Author: Craig Mikus, Sr. Director, Enterprise Mobile Solutions Seems like every customer is either building or planning to build mobile apps, especially customer facing apps. Why? Inevitably, all companies want to improve the customer experience through more quality interactions that drive customer satisfaction, customer loyalty, new revenue streams, and even improve the way they service their customers. What better way than mobile apps? Right? But how can customers add more value to these mobile apps to drive more business benefit? Look closely, the answer just might be right in front of you. Still need another clue? What’s the first 4 letters of mobile – mo-bi? Or pronounced differently, More BI. That’s right – add more business intelligence to your overall mobile strategy. In today’s customer centric world where customer interactions and personalization are critical, it’s important to leverage a BI strategy that complements and feeds into your mobile strategy. For example, I was recently talking to a customer that was implementing a data warehouse project focused customer analytics. Their goal was to understand who are their best customers and why, develop customer profiles, identify customer trends & patterns, identify cross sell opportunities, and much more. The company then wanted to feed this information to marketing for targeted campaigns and programs. As we continued to talk, I asked my contact if they had plans to feed this information into their customer facing mobile apps to personalize the apps, target their interactions, and hopefully drive customer loyalty and new revenue streams? Two minutes later, my contact was calling his mobile development teams. So my advice to everyone, as you establish your enterprise mobile strategy and goals, remember that “mo-BI” is a critical component to add value to your mobile apps! So make sure you have “mo BI” in your mobile strategy. As I come to think of it, did you ever notice that Big Data also starts with BI?

  Read the article

• No Clipboard support in Windows Phone 7 Series &ndash; iPhone points laughs

  - by Sarang

  What exactly were you taking of late MSFT? So much for a spanking new mobile OS which wants to emulate the iPhone OS so badly that it even copied and pasted the iPhone’s erstwhile lack of clipboard support as well? The reason given is so lame (shall I say differently able?) that deserves pity rather than lament. According to MSFT people don’t use the clipboard that often. Being a WinMo user for the better part of my life and having developed for the platform for worse part of it I could say with conviction that Clipboard support was one key differentiator which kept me away from “The Phone to have” of 2007-8-9. Let me try to find few use cases I for one have been using the clipboard. Copy files to and from card and phone memory. Copy images, audio files from apps/browsers/explorer to email other apps. Copy text to/from word documents, notes and emails. Copy content from network drives to memory card. Copy links between browsers (Yes i did it for the love of Opera and PIE alike). Others could definitely come up with more. So who are these so called “users” who provided feedback to MSFT that the clipboard is useless? If you are among the lucky few being asked for the “feedback” kindly chime in the comments. Would be interesting to see different views on this. Technorati Tags: Windows Phone 7 Series,Clipboard

  Read the article

• Libgdx ParallaxScrolling and TiledMaps

  - by kirchhoff

  I implemented ParallaxScrolling for my SideScroller project, everything is working but the tiled map (the most important part!). I've been trying out everything but it doesn't work (see the code below). I'm using ParallaxCamera from GdxTests, it's working perfectly for the background layers. I can't explain myself properly in english, so I recorded 2 videos: Before parallaxScrolling After parallaxScrolling As you can see, now the platforms appear in the middle of the Y-axis. I've got a Map class with 2 tiled maps, so I need two renderers too: private TiledMapRenderer renderer1; private TiledMapRenderer renderer2; public void update(GameCamera camera) { renderer1.setView(camera.calculateParallaxMatrix(1f, 0f), camera.position.x - camera.viewportWidth / 2, **camera.position.y - camera.viewportHeight/2**, camera.viewportWidth, camera.viewportHeight); renderer2.setView(camera.calculateParallaxMatrix(1f, 0f), camera.position.x - camera.viewportWidth / 2, **camera.position.y - camera.viewportHeight/2**, camera.viewportWidth, camera.viewportHeight); } In bold, the code I think I should change. I've tried changing parameters, even adding hardcoded values, etc, but one of two: 1. Nothing happens. 2. Platforms disappear. Here is some aditional code. The render method: world.update(delta); parallaxBackground.update(camera); clear(0.5f, 0.7f, 1.0f, 1); batch.setProjectionMatrix(camera.calculateParallaxMatrix(0, 0)); batch.disableBlending(); batch.begin(); batch.draw(background, -(int)background.getRegionWidth()/2, -(int)background.getRegionHeight()/2); batch.end(); batch.enableBlending(); parallaxBackground.draw(batch, camera); renderer.render(batch);

  Read the article

• SFTP permission denied on files owned by www-data

  - by Charles Roper

  I have a pretty standard server set up running Apache and PHP. An app I am running creates files and these are owned by the Apache user www-data. Files that I upload via SFTP are owned by my own user charlesr. All files are part of the www-data group. My problem is that I cannot modify or overwrite any of the files via SFTP which are owned by www-data, even though charlesr is part of the www-data group. I can modify the files no problem via a SSH session. So I'm not sure what to do. How do I give my SFTP session permissions to modify www-data owned files? For a bit of background, these are the notes I wrote for myself when setting-up the server: Now set up permissions on `/var/www` where your files are served from by default: $ sudo adduser $USER www-data $ sudo chgrp -R www-data /var/www $ sudo chmod -R g+rw /var/www $ sudo chmod -R g+s /var/www Now log out and log in again to make the changes take hold. The previous set of commands does the following: 1. adds the current user ($USER) to the `www-data` group; 2. changes `/var/www` to belong to the `www-data` group; 3. adds read/write permissions to the group that `/var/www` belongs to; 4. sets the SGID bit on `/var/www`; this final point bears some explaining. And then I go on to explain to myself what setting the SGID bit means (i.e. all files created in /var/www become part of the www-data group automatically). Btw, nothing feels sweeter than going back and reading your own detailed notes on the what, how and why of your own server set up when trying to troubleshoot like this - I recommend it highly to all beginners like myself :-)

  Read the article

• Semantic Versioning and splitting apart a library, providing a bundled build

  - by Derick Bailey

  I've got a nice, fairly popular JavaScript library that is following Semantic Versioning. The current library has a few dependency libraries, which are available either as separate downloads or as part of a single bundled download. I see a need to head down this path further. I want to extract additional, smaller libraries out of the one larger library. Each of these extracted libraries would be available as separate files, or inside of the one bundled build, again. If I go down this path of extracting the libraries, and providing a bundled version of the final code, does this require a full version change in semantic versioning? Would I have to bump from 1.x to 2.x? My first thought it no: I will not change any public API, so I don't have to change the major version number. But then I wonder... well, I am restructuring a lot of things, even though the final API for the bundled version would be the same. Is there a clear answer from semver on something like this? Do I need to bump first, second or third dot? Or something else?

  Read the article

• Help in (re)designing my Swing application

  - by Harihar Das

  I have developed a Swing application that controls execution of several script like jobs. I need to display the interim output of the jobs concurrently. I have followed MVC while writing the application. The application is working as expected. But off late I have the following requirements in hand: A few of the script jobs need special user privileges to execute so as to access specialized resources. There seems to be now way in Java to impersonate as a different user while running an application.[examined in this question]. Also trying to run the Swing application as a scheduled task in windows is not helping. Once started the jobs should be running even if the user logs off after starting the jobs. I am thinking of separating the execution logic from the UI and run that as a service; and introduce JMS in between the two layers so as to store/retrieve the interim the output. Note: I need to run this application on windows Any ideas on meeting my requirements will be highly appreciated.

  Read the article

• Relationship between Repository and Unit of Work

  - by NullOrEmpty

  I am going to implement a repository, and I would like to use the UOW pattern since the consumer of the repository could do several operations, and I want to commit them at once. After read several articles about the matter, I still don't get how to relate this two elements, depending on the article it is being done in a way u other. Sometimes the UOW is something internal to the repository: public class Repository { UnitOfWork _uow; public Repository() { _uow = IoC.Get<UnitOfWork>(); } public void Save(Entity e) { _uow.Track(e); } public void SubmittChanges() { SaveInStorage(_uow.GetChanges()); } } And sometimes it is external: public class Repository { public void Save(Entity e, UnitOfWork uow) { uow.Track(e); } public void SubmittChanges(UnitOfWork uow) { SaveInStorage(uow.GetChanges()); } } Other times, is the UOW whom references the Repository public class UnitOfWork { Repository _repository; public UnitOfWork(Repository repository) { _repository = repository; } public void Save(Entity e) { this.Track(e); } public void SubmittChanges() { _repository.Save(this.GetChanges()); } } How are these two elements related? UOW tracks the elements that needs be changed, and repository contains the logic to persist those changes, but... who call who? Does the last make more sense? Also, who manages the connection? If several operations have to be done in the repository, I think using the same connection and even transaction is more sound, so maybe put the connection object inside the UOW and this one inside the repository makes sense as well. Cheers

  Read the article

• How does one rein in the complexities of web development ?

  - by Rahul

  I have been a server-side programmer for most of my career and have only recently started spending more time on web development. I am amazed at the number of things I need to master in order to write a decent web application. Just to list down a few tools/technologies I need to learn, Server side programming language (Java/JSP, ASP, PHP, Ruby or something else) A decent web framework (for any medium to big size application). HTML & CSS Javascript Javascript library (JQuery/ExtJS etc. primarily for AJAX). Good to know even if not necessary. At least a basic knowledge of web design - layouts, colors, fonts etc. A good understanding of web security. A good understanding of Performance/scalability issues. Testing, browser compatibility issues etc. The list goes on. So, my question to seasoned web developers is - How do you guys manage to learn and keep yourself updated on so many things? While developing a web application, how do you handle the complexities involved in these areas and yet manage to write an application that is well designed, user friendly, secure, performant and scalable. As a web developer, does one have to be a jack of all trades or should one specialize in one or two areas and leave the rest to other members of the team ?

  Read the article

• At the time of installing ubuntu, i am getting dark black screen only

  - by faruque

  I am trying to install Ubuntu 12.04 LTS dual boot with Windows 7, but when i click on Try or even Install ubuntu, i am getting black screen only. I can't see any text or anything else. When i see my Laptop's screen from close look, ubuntu in the middle of screen shown but screen is dark black. So because of this i am unable to install Ubuntu on my laptop. Please help in this regard. Following deatails of my laptop. Details of my Laptop: Manufacturer- Acer Aspire 4736 Processor- Intel core 2 duo CPU T660 Graphics driver- Mobile Intel(R) 4 series express chipset family (Microsoft corporation - WDDM 1.1), Current version installed- 8.15.10.2302 In ubuntu 11.04 i know how to boot into nomodeset, but i don't know how to boot through nomodeset in ubuntu 12.04 LTS. Because there is no option shown for F6 key. My laptop is Acer aspire 4736, and my Video/Graphics card shows unknown by ubuntu. Please someone help me. Can changing or upgrading my laptop's graphic card solve this problem..?? If yes then, which graphic card should i go for which is supported by Ubuntu and other Linux distros? Please someone help.

  Read the article

• Tell Us Once&ndash;Guardian Innovation Award Winner

  - by BizTalk Visionary

  Yesterday the Tell Us Once project received it’s latest accolade. My partner in crime in the execution of the delivery of software for this project, Mark Usher,  reports: It’s always great to receive recognition for the effort you put in when working on a project. It’s no secret that here at Solidsoft we are extremely proud of our association with the Government’s Tell Us Once (TUO) programme. Having already been selected by Microsoft as Worldwide Partner Conference (WPC) 2011 Award Winners for Application Integration, we are very pleased that the TUO programme as a whole has been recognised and has won the Guardian Newspaper’s Innovation Nation Award for Frontline Services (link to http://www.guardian.co.uk/innovation-nation-awards )  The TUO entry was judged the winner over three other shortlisted solutions from Dyfed Powys Police, North Yorkshire County Council and Staffordshire County Council. Innovation Nation is a partnership between Virgin Media Business and the Guardian, an initiative to uncover the most innovative businesses, public sector organisations and charities in the UK today.  Its aim is to showcase the ideas, the endeavour and the energy that are making things better in the areas of customer service, unique working practices, frontline government services and collaboration. Solidsoft have been involved with the Tell Us Once programme since its inception in 2007 and worked closely with the Department of Work and Pensions (DWP) to produce a business case for the programme. Teaming up with Atos (who host the application) Solidsoft delivered the first national solution in 2011 and a second phase in April 2012. Whilst currently restricted to distributing citizen data to central government organisations and local government authorities, DWP is now actively engaging with the private sector to see if TUO data can be disclosed to private sector organisations such as banks and building societies. Solidsoft welcome this expansion into the private sector where even more efficiencies will be realised. Mark Usher - Solidsoft Sales and Marketing Director For my part I’d like to say a big thank you to the Solidsoft Team, ATOS team and DWP team that made it happen.

  Read the article

• What is your most preferred method of site pagination?

  - by John Smith

  There seem to be quite a few implementations of this feature. Some sites like like Stackexchange have it laid out like this: [1][2][3][4][5] ... [954][Next] Other sites like game forums may have something like this: [1][2][3] ... [10] ... [50] ... [500] ... [954][Next] Some sites like webcomics (XKCD comes to mind) have it laid out like this: [Last][Prev][Random][Next][First] Reddit has a very simple pagination with only: [Prev][Next] Sites like Stackexchange and Google also allow you to change how many results you want per page. Personally, I have never used this feature. Is it even worth including or does it just further confuse the design with needless features? Personally, I have only ever seen the need for the webcomic style (without the random). If I need to go to a specific page (which is very, very rare) then I can just edit the address bar. Is it good design to make something more complex for rare occasions where it might make save the user some time? Is having to edit the address bar to navigate the site effectively in some circumstances bad design?

  Read the article

< Previous Page | 709 710 711 712 713 714 715 716 717 718 719 720  | Next Page >