Search Results

Search found 22308 results on 893 pages for 'floating point'.

Page 714/893 | < Previous Page | 710 711 712 713 714 715 716 717 718 719 720 721  | Next Page >

• MSBuild script fails but produces no errors

  - by Kate

  I have a MSBuild script that I am executing through TeamCity. One of the tasks that is runs is from Xheo DeploxLX CodeVeil which obfuscates some DLLs. The task I am using is called VeilProject. I have run the CodeVeil Project through the interface manually and it works correctly, so I think I can safely assume that the actual obfuscate process is ok. This task used to take around 40 minutes and the rest of the MSBuild file executed perfectly and finished without errors. For some reason this task is now taking 1hr 20 minutes or so to execute. Once the VeilProject task is finished the output from the task says it completely successfully, however the MSBuild script fails at this point. I have a task directly after the VeilProject task and it does not get outputted. Using diagnostic output from MSBUild I can see the following: My questions are: Would it be possible that the MSBuild script has timed out? Once the task has completed it is after a certain timeout period so it just fails? Why would the build fail with no errors and no warnings? [05:39:06]: [Target "Obfuscate"] Finished. [05:39:06]: [Target "Obfuscate"] Saving exception map [05:49:21]: [Target "Obfuscate"] Ended at 11/05/2010 05:49:21, ~1 hour, 48 minutes, 6 seconds [05:49:22]: [Target "Obfuscate"] Done. [05:49:51]: MSBuild output: Ended at 11/05/2010 05:49:21, ~1 hour, 48 minutes, 6 seconds (TaskId:8) Done. (TaskId:8) Done executing task "VeilProject" -- FAILED. (TaskId:8) Done building target "Obfuscate" in project "AMK_Release.proj.teamcity.patch.tcprojx" -- FAILED.: (TargetId:12) Done Building Project "C:\Builds\Scripts\AMK_Release.proj.teamcity.patch.tcprojx" (All target(s)) -- FAILED. Project Performance Summary: 6535484 ms C:\Builds\Scripts\AMK_Release.proj.teamcity.patch.tcprojx 1 calls 6535484 ms All 1 calls Target Performance Summary: 156 ms PreClean 1 calls 266 ms SetBuildVersionNumber 1 calls 2406 ms CopyFiles 1 calls 6532391 ms Obfuscate 1 calls Task Performance Summary: 16 ms MakeDir 2 calls 31 ms TeamCitySetBuildNumber 1 calls 31 ms Message 1 calls 62 ms RemoveDir 2 calls 234 ms GetAssemblyIdentity 1 calls 2406 ms Copy 1 calls 6528047 ms VeilProject 1 calls Build FAILED. 0 Warning(s) 0 Error(s) Time Elapsed 01:48:57.46 [05:49:52]: Process exit code: 1 [05:49:55]: Build finished

  Read the article

• how to display my list with n amount on each line in Python

  - by user1786698

  im trying to display my list with 7 states on each line here is what i have so far, but it displays as one long string of all the states with quotes around each state. I forgot to mention that this is for my CS class and we havent learned iter yet so we not allowed to use it. the only hint i was given was to to turn STATE_LIST into a string then use '\n' to break it up state = str(STATE_LIST) displaystates = Text(Point(WINDOW_WIDTH/2, WINDOW_HEIGHT/2), state.split('\n')) displaystates.draw(win) and STATE_LIST looks like this STATE_VOTES = { "AL" : 9, # Alabama "AK" : 3, # Alaska "AZ" : 11, # Arizona "AR" : 6, # Arkansas "CA" : 55, # California "CO" : 9, # Colorado "CT" : 7, # Connecticut "DE" : 3, # Delaware "DC" : 3, # Washington DC "FL" : 29, # Florida "GA" : 16, # Georgia "HI" : 4, # Hawaii "ID" : 4, # Idaho "IL" : 20, # Illinois "IN" : 11, # Indiana "IA" : 6, # Iowa "KS" : 6, # Kansas "KY" : 8, # Kentucky "LA" : 8, # Louisiana "ME" : 4, # Maine "MD" : 10, # Maryland "MA" : 11, # Massachusetts "MI" : 16, # Michigan "MN" : 10, # Minnesota "MS" : 6, # Mississippi "MO" : 10, # Missouri "MT" : 3, # Montana "NE" : 5, # Nebraska "NV" : 6, # Nevada "NH" : 4, # New Hampshire "NJ" : 14, # New Jersey "NM" : 5, # New Mexico "NY" : 29, # New York "NC" : 15, # North Carolina "ND" : 3, # North Dakota "OH" : 18, # Ohio "OK" : 7, # Oklahoma "OR" : 7, # Oregon "PA" : 20, # Pennsylvania "RI" : 4, # Rhode Island "SC" : 9, # South Carolina "SD" : 3, # South Dakota "TN" : 11, # Tennessee "TX" : 38, # Texas "UT" : 6, # Utah "VT" : 3, # Vermont "VA" : 13, # Virginia "WA" : 12, # Washington "WV" : 5, # West Virginia "WI" : 10, # Wisconsin "WY" : 3 # Wyoming } STATE_LIST = sorted(list(STATE_VOTES.keys())) I am trying to get it to look somewhat like this

  Read the article

• Passing variables from a thread to another form using C#

  - by kirstom14

  Hi, I am trying to pass 2 variables from a thread, in the MainForm, to another form, but when doing so an error occurs. private void TrackingThread( ) { float targetX = 0; float targetY = 0; while ( true ) { camera1Acquired.WaitOne( ); camera2Acquired.WaitOne( ); lock ( this ) { // stop the thread if it was signaled if ( ( x1 == -1 ) && ( y1 == -1 ) && ( x2 == -1 ) && ( y2 == -1 ) ) { break; } // get middle point targetX = ( x1 + x2 ) / 2; targetY = ( y1 + y2 ) / 2; } if (directionForm != null) { directionForm.RunMotors(targetX, targetY); } } } In the form, directionForm, I am simply displaying the variables targetX and targetY. The code for the directionForm.RunMotors() is the following: public void RunMotors(float x, float y) { label1.Text = "X-ordinate " + x.ToString(); label2.Text = "Y-ordinate " + y.ToString(); } The error happen when I am trying to display the two variables: "InvalidOperationException was unhandled Cross-threading operation not valid: Control label1 accessed from a thread other than . the thread it was created on" What shall I do??? Thanks in advance

  Read the article

• Are Fortran control characters (carriage control) still implemented in compilers?

  - by CmdrGuard

  In the book Fortran 95/2003 for Scientists and Engineers, there is much talk given to the importance of recognizing that the first column in a format statement is reserved for control characters. I've also seen control characters referred to as carriage control on the internet. To avoid confusion, by control characters, I refer to the characters "1, a blank (i.e. \s), 0, and +" as having an effect on the vertical spacing of output when placed in the first column (character) of a FORMAT statement. Also, see this text-only web page written entirely in fixed-width typeface : Fortran carriage-control (because nothing screams accuracy and antiquity better than prose in monospaced font). I found this page and others like it to be not quite clear. According to Fortran 95/2003 for Scientists and Engineers, failure to recall that the first column is reserved for carriage control can lead to horrible unintended output. Paraphrasing Dave Barry, type the wrong character, and nuclear missiles get fired at Norway. However, when I attempt to adhere to this stern warning, I find that gfortran has no idea what I'm talking about. Allow me to illustrate my point with some example code. I am trying to print out the number Pi: PROGRAM test_format IMPLICIT NONE REAL :: PI = 2 * ACOS(0.0) WRITE (*, 100) PI WRITE (*, 200) PI WRITE (*, 300) PI 100 FORMAT ('1', "New page: ", F11.9) 200 FORMAT (' ', "Single Space: ", F11.9) 300 FORMAT ('0', "Double Space: ", F11.9) END PROGRAM test_format This is the output: 1New page: 3.141592741 Single Space: 3.141592741 0Double Space: 3.141592741 The "1" and "0" are not typos. It appears that gfortran is completely ignoring the control character column. My question, then, is this: Are control characters still implemented in standards compliant compilers or is gfortran simply not standards compliant? For clarity, here is the output of my gfortran -v Using built-in specs. Target: powerpc-apple-darwin9 Configured with: ../gcc-4.4.0/configure --prefix=/sw --prefix=/sw/lib/gcc4.4 --mandir=/sw/share/man --infodir=/sw/share/info --enable-languages=c,c++,fortran,objc,java --with-gmp=/sw --with-libiconv-prefix=/sw --with-ppl=/sw --with-cloog=/sw --with-system-zlib --x-includes=/usr/X11R6/include --x-libraries=/usr/X11R6/lib --disable-libjava-multilib --build=powerpc-apple-darwin9 --host=powerpc-apple-darwin9 --target=powerpc-apple-darwin9 Thread model: posix gcc version 4.4.0 (GCC)

  Read the article

• Libraries and pseudocode for physical Dashboard/Status board

  - by dani

  OK, so I bought a 46" screen for the office yesterday, and with the imminent risk of being accused for setting up an "elaborate World Cup procrastination scheme", I'd better show my colleagues what it's meant for ;) Looking at my simple sketch, and at these great projects from which I was inspired, I would like to get some input on the following: Pseudocode for the skeleton: As some methods should be called every 24 hours ("Today's date in the heading"), others at 60 second intervals ("Twitter results"), what would be a good approach using JavaScript (jQuery) and PHP? EDIT: Alsciende: I can agree that #1 and #8 are too vague. Therefore I remove #8 and try to clarify #1: With "Pseudocode for the skeleton", I basically mean could this be done entirely using JavaScript timers and how would you set up the various timers? Library for Google Analytics: Which libraries support the Google Analytics API and can produce neat charts. Preferably HTML5, JavaScript-based like Protovis. Library for Twitter: Which libraries would you recommend for fetching twitter search results and latest tweets from profiles. Libraries for Typography/CSS/HTML5: Trying to learn some HTML5 etc. in the process, please advice on any other typography/css libraries that could be of relevance. Scraping/Parsing? I'll give you a concrete example: Trying to fetch today's menu from this restaurant's website, how would you go about? (it's in Swedish - but you get the point - sorry ;) ) Real-time stats? I'm using the WassUp-plugin for WordPress to track real-time visitors on our website. Other logging software (AWStats etc.) is probably also installed on the webserver. Any ideas on how to extract information from these and present in real-time on the dashboard? Browser choice? Which Browser and OS would you pick? Stable, Full-screen, HTML5.

  Read the article

• Grails - Language prefix in url mappings

  - by Art79

  Hi there im having problem with language mappings. The way i want it to work is that language is encoded in the url like /appname/de/mycontroller/whatever If you go to /appname/mycontroller/action it should check your session and if there is no session pick language based on browser preference and redirect to the language prefixed site. If you have session then it will display english. English does not have en prefix (to make it harder). So i created mappings like this: class UrlMappings { static mappings = { "/$lang/$controller/$action?/$id?"{ constraints { lang(matches:/pl|en/) } } "/$lang/store/$category" { controller = "storeItem" action = "index" constraints { lang(matches:/pl|en/) } } "/$lang/store" { controller = "storeItem" action = "index" constraints { lang(matches:/pl|en/) } } "/$controller/$action?/$id?"{ lang="en" constraints { } } "/store/$category" { lang="en" controller = "storeItem" action = "index" } "/store" { lang="en" controller = "storeItem" action = "index" } "/"(view:"/index") "500"(view:'/error') } } Its not fully working and langs are hardcoded just for now. I think i did something wrong. Some of the reverse mappings work but some dont add language. If i use link tag and pass params:[lang:'pl'] then it works but if i add params:[lang:'pl', page:2] then it does not. In the second case both lang and page number become parameters in the query string. What is worse they dont affect the locale so page shows in english. Can anyone please point me to the documentation what are the rules of reverse mappings or even better how to implement such language prefix in a good way ? THANKS

  Read the article

• Drill through table does not show correct count when used with a dimension having parent child hiera

  - by Arun Singhal

  Hi All, I have a dimension with parent child hierarchy as shown in code block. The issue i am facing is if i have a filter on parent child dimension then drill through table does not show filtered data instead it shows all the data for that dimension. Here is an example. <Dimension type="StandardDimension" name="page_type_d" caption="Page Type"> <Hierarchy name="page_type_h" hasAll="true" allMemberName="all_page_types" allMemberCaption="All Page Types" primaryKey="id"> <Table name="npg_page_type_view" alias="pt"> </Table> <Level name="Page Type" column="id" nameColumn="display_name" parentColumn="parent_id" nullParentValue="0" type="Integer" uniqueMembers="true" levelType="Regular" hideMemberIf="Never" caption="Page Type"> <Closure parentColumn="parent_id" childColumn="page_type_id"> <Table name="dim_page_types_closure"> </Table> </Closure> </Level> </Hierarchy> Now suppose i have 4 rows in npg_page_type_view table id display_name parent_id 19 HTML 100 20 PDF 100 21 XML 0 100 Total 0 Now suppose in my fact table i have following records id count 19 2 20 3 21 1 Following is my analysis view. Total (HTML and PDF) - 5 HTML - 2 PDF - 3 XML - 1 Now if i add filter(say Total) on this analysis view using OLAP cube. Then my analysis view shows the following. Total (HTML and PDF) - 5 Upto this point everything works fine. Now if i click on 5 (to view drill through table) It shows me data against all page type i.e. HTML, PDF, XML but as per filter it should show only HTML and PDF. Is it an exciting issue or am i doing something wrong here? Please help me.

  Read the article

• Embed ActionScript (AS) into flash

  - by David ???

  Hey SO, I've never dealt with Flash/ActionScript, so please bear with me. Mostly, I'm a bit confused. I've done many work with Java/C as well as HTML/Javascript. I am working with a designer who provides me with flash files (.swf). From my point of view, it's a simple "mock" to which I need to embed a single object. This object is a TextBox, with which the user interacts. I need to be able to Insert such a TextBox to a Flash file Retrieve text upon key event process it, and return it to the TextBox As I understood from other posts, I'll be working with AS, right? How do I embed such an object to an existing Flash file? Being that the graphical part is over once I have the TextBox, would I need any fancy IDE for that? What IDE is that (I usually work with Eclipse)? One last note: I am working with that designer, so I have access to all her creation process. She does not know code, nor do I think she'll get it. I would much prefer to give her as little headache as possible (e.g. just instruct her how to export the files to me from her Adobe Flash CS5 studio). Many thanks, David

  Read the article

• Exception from HRESULT: 0x80020009 (DISP_E_EXCEPTION)) in SharePoint Part 2

  - by BeraCim

  Hi all: Following this post which I posted some time ago, I now get the same error every time I try to rewire 2 web's URLs. Basically, this is the code. It runs in a LongRunningOperationJob: SPWeb existingWeb = null; using (existingWeb = site.OpenWeb(wedId)) { SPWeb destinationWeb = createNewSite(existingWeb); existingWeb.AllowUnsafeUpdates = true; existingWeb.Name = existingWeb.Name + "_old"; existingWeb.Title = existingWeb.Title + "_old"; existingWeb.Description = existingWeb.Description + "_old"; existingWeb.Update() existingWeb.AllowUnsafeUpdates = false; destinationWeb.AllowUnsafeUpdates = true; destinationWeb.Name = existingWeb.Name; destinationWeb.Title = existingWeb.Title; destinationWeb.Description = existingWeb.Description; destinationWeb.Update(); destinationWeb.AllowUnsafeUpdates = false; // null this for what its worth existingWeb = null; destinationWeb = null; } // <---- Exception raised here Basically, the code is trying to rename the existing site's URL to something else, and have the destination web's url point to the old site's URL. When I run this for the first time, I received the Exception mentioned in the subject. However, every run after, I do not see the exception anymore. The webs DO get rewired... but at the cost of the app dying an unnecessary and terrible death. I'm at a complete lost as to what is going on and needs urgent help. Does sharepoint keep any hidden table from me or is the logic above has fatal problems? Thanks.

  Read the article

• inserting a form to session raises picklingerror - django

  - by shanyu

  I receive an exception when I add a form to the session: PicklingError: Can't pickle <class 'django.utils.functional.__proxy__'>: attribute lookup django.utils.functional.__proxy__ failed The form includes a few simple fields and has some javascript attached to a widget. It might be that Django forms cannot be pickled at all, but the exception seems to point to unicode lazy translation. To test further, I have also tried to insert only the form errors (an errordict) to the session and received the same error. I appreciate some help here, thanks in advance. EDIT: Here's why I insert a form into the session: I have an app that has a form. This form is rendered by a template tag in another app. When posted, if the form is valid, no problem, I do stuff and redirect to "next". However if it is not valid, I want to go back to the posting page to show errors. Recall that the comments app in this case redirects to an intermediate "hey, please fix the errors" page. I am trying to avoid this, and hence redirect back to the posting page with the form and its errors in the session that the template tag will render.

  Read the article

• How to implement progressbar(to show progress) using threading concept in win 32?

  - by Rakesh

  I am trying to show a progress bar while my process is going on...in my application there will be a situation where I gotta read files and manipulate them(it will take some time to complete)..want to display a progress bar during this operation..the particular function I am calling is an win 32 ...so if you check my code below i am upto the point of creating the progress bar in a dialog window and creating a thread Now I dont know how to post the message and where to get the message and handle...Please help me..thanks in advance //my function int Myfunction(....) { HWND dialog = CreateWindowEx(0,WC_DIALOG,L"Proccessing...",WS_OVERLAPPEDWINDOW|WS_VISIBLE, 600,300,280,120,NULL,NULL,NULL,NULL); HWND pBar = CreateWindowEx(NULL,PROGRESS_CLASS,NULL,WS_CHILD|WS_VISIBLE,40,20,200, 20, dialog,(HMENU)IDD_PROGRESS,NULL,NULL); HANDLE getHandle = CreateThread(NULL,NULL,(LPTHREAD_START_ROUTINE)SetFilesForOperation(...), NULL,NULL,0); } LPARAM SetFilesForOperation(...) { for(int index = 0;index < noOfFiles; index++) { *checkstate = *(checkState + index); if(*checkstate == -1) { *(getFiles+i) = new TCHAR[MAX_PATH]; wcscpy(*(getFiles+i),*(dataFiles +index)); i++; } else { (*tempDataFiles)->Add(*(dataFiles+index)); *(checkState + localIndex) = *(checkState + index); localIndex++; } //SendMessage(pBar,PBM_SETSTEP,1,0); } }

  Read the article

• undefined reference to function, despite giving reference in c

  - by Jamie Edwards

  I'm following a tutorial, but when it comes to compiling and linking the code I get the following error: /tmp/cc8gRrVZ.o: In function `main': main.c:(.text+0xa): undefined reference to `monitor_clear' main.c:(.text+0x16): undefined reference to `monitor_write' collect2: ld returned 1 exit status make: *** [obj/main.o] Error 1 What that is telling me is that I haven't defined both 'monitor_clear' and 'monitor_write'. But I have, in both the header and source files. They are as follows: monitor.c: // monitor.c -- Defines functions for writing to the monitor. // heavily based on Bran's kernel development tutorials, // but rewritten for JamesM's kernel tutorials. #include "monitor.h" // The VGA framebuffer starts at 0xB8000. u16int *video_memory = (u16int *)0xB8000; // Stores the cursor position. u8int cursor_x = 0; u8int cursor_y = 0; // Updates the hardware cursor. static void move_cursor() { // The screen is 80 characters wide... u16int cursorLocation = cursor_y * 80 + cursor_x; outb(0x3D4, 14); // Tell the VGA board we are setting the high cursor byte. outb(0x3D5, cursorLocation >> 8); // Send the high cursor byte. outb(0x3D4, 15); // Tell the VGA board we are setting the low cursor byte. outb(0x3D5, cursorLocation); // Send the low cursor byte. } // Scrolls the text on the screen up by one line. static void scroll() { // Get a space character with the default colour attributes. u8int attributeByte = (0 /*black*/ << 4) | (15 /*white*/ & 0x0F); u16int blank = 0x20 /* space */ | (attributeByte << 8); // Row 25 is the end, this means we need to scroll up if(cursor_y >= 25) { // Move the current text chunk that makes up the screen // back in the buffer by a line int i; for (i = 0*80; i < 24*80; i++) { video_memory[i] = video_memory[i+80]; } // The last line should now be blank. Do this by writing // 80 spaces to it. for (i = 24*80; i < 25*80; i++) { video_memory[i] = blank; } // The cursor should now be on the last line. cursor_y = 24; } } // Writes a single character out to the screen. void monitor_put(char c) { // The background colour is black (0), the foreground is white (15). u8int backColour = 0; u8int foreColour = 15; // The attribute byte is made up of two nibbles - the lower being the // foreground colour, and the upper the background colour. u8int attributeByte = (backColour << 4) | (foreColour & 0x0F); // The attribute byte is the top 8 bits of the word we have to send to the // VGA board. u16int attribute = attributeByte << 8; u16int *location; // Handle a backspace, by moving the cursor back one space if (c == 0x08 && cursor_x) { cursor_x--; } // Handle a tab by increasing the cursor's X, but only to a point // where it is divisible by 8. else if (c == 0x09) { cursor_x = (cursor_x+8) & ~(8-1); } // Handle carriage return else if (c == '\r') { cursor_x = 0; } // Handle newline by moving cursor back to left and increasing the row else if (c == '\n') { cursor_x = 0; cursor_y++; } // Handle any other printable character. else if(c >= ' ') { location = video_memory + (cursor_y*80 + cursor_x); *location = c | attribute; cursor_x++; } // Check if we need to insert a new line because we have reached the end // of the screen. if (cursor_x >= 80) { cursor_x = 0; cursor_y ++; } // Scroll the screen if needed. scroll(); // Move the hardware cursor. move_cursor(); } // Clears the screen, by copying lots of spaces to the framebuffer. void monitor_clear() { // Make an attribute byte for the default colours u8int attributeByte = (0 /*black*/ << 4) | (15 /*white*/ & 0x0F); u16int blank = 0x20 /* space */ | (attributeByte << 8); int i; for (i = 0; i < 80*25; i++) { video_memory[i] = blank; } // Move the hardware cursor back to the start. cursor_x = 0; cursor_y = 0; move_cursor(); } // Outputs a null-terminated ASCII string to the monitor. void monitor_write(char *c) { int i = 0; while (c[i]) { monitor_put(c[i++]); } } void monitor_write_hex(u32int n) { s32int tmp; monitor_write("0x"); char noZeroes = 1; int i; for (i = 28; i > 0; i -= 4) { tmp = (n >> i) & 0xF; if (tmp == 0 && noZeroes != 0) { continue; } if (tmp >= 0xA) { noZeroes = 0; monitor_put (tmp-0xA+'a' ); } else { noZeroes = 0; monitor_put( tmp+'0' ); } } tmp = n & 0xF; if (tmp >= 0xA) { monitor_put (tmp-0xA+'a'); } else { monitor_put (tmp+'0'); } } void monitor_write_dec(u32int n) { if (n == 0) { monitor_put('0'); return; } s32int acc = n; char c[32]; int i = 0; while (acc > 0) { c[i] = '0' + acc%10; acc /= 10; i++; } c[i] = 0; char c2[32]; c2[i--] = 0; int j = 0; while(i >= 0) { c2[i--] = c[j++]; } monitor_write(c2); } monitor.h: // monitor.h -- Defines the interface for monitor.h // From JamesM's kernel development tutorials. #ifndef MONITOR_H #define MONITOR_H #include "common.h" // Write a single character out to the screen. void monitor_put(char c); // Clear the screen to all black. void monitor_clear(); // Output a null-terminated ASCII string to the monitor. void monitor_write(char *c); #endif // MONITOR_H common.c: // common.c -- Defines some global functions. // From JamesM's kernel development tutorials. #include "common.h" // Write a byte out to the specified port. void outb ( u16int port, u8int value ) { asm volatile ( "outb %1, %0" : : "dN" ( port ), "a" ( value ) ); } u8int inb ( u16int port ) { u8int ret; asm volatile ( "inb %1, %0" : "=a" ( ret ) : "dN" ( port ) ); return ret; } u16int inw ( u16int port ) { u16int ret; asm volatile ( "inw %1, %0" : "=a" ( ret ) : "dN" ( port ) ); return ret; } // Copy len bytes from src to dest. void memcpy(u8int *dest, const u8int *src, u32int len) { const u8int *sp = ( const u8int * ) src; u8int *dp = ( u8int * ) dest; for ( ; len != 0; len-- ) *dp++ =*sp++; } // Write len copies of val into dest. void memset(u8int *dest, u8int val, u32int len) { u8int *temp = ( u8int * ) dest; for ( ; len != 0; len-- ) *temp++ = val; } // Compare two strings. Should return -1 if // str1 < str2, 0 if they are equal or 1 otherwise. int strcmp(char *str1, char *str2) { int i = 0; int failed = 0; while ( str1[i] != '\0' && str2[i] != '\0' ) { if ( str1[i] != str2[i] ) { failed = 1; break; } i++; } // Why did the loop exit? if ( ( str1[i] == '\0' && str2[i] != '\0' || (str1[i] != '\0' && str2[i] =='\0' ) ) failed =1; return failed; } // Copy the NULL-terminated string src into dest, and // return dest. char *strcpy(char *dest, const char *src) { do { *dest++ = *src++; } while ( *src != 0 ); } // Concatenate the NULL-terminated string src onto // the end of dest, and return dest. char *strcat(char *dest, const char *src) { while ( *dest != 0 ) { *dest = *dest++; } do { *dest++ = *src++; } while ( *src != 0 ); return dest; } common.h: // common.h -- Defines typedefs and some global functions. // From JamesM's kernel development tutorials. #ifndef COMMON_H #define COMMON_H // Some nice typedefs, to standardise sizes across platforms. // These typedefs are written for 32-bit x86. typedef unsigned int u32int; typedef int s32int; typedef unsigned short u16int; typedef short s16int; typedef unsigned char u8int; typedef char s8int; void outb ( u16int port, u8int value ); u8int inb ( u16int port ); u16int inw ( u16int port ); #endif //COMMON_H main.c: // main.c -- Defines the C-code kernel entry point, calls initialisation routines. // Made for JamesM's tutorials <www.jamesmolloy.co.uk> #include "monitor.h" int main(struct multiboot *mboot_ptr) { monitor_clear(); monitor_write ( "hello, world!" ); return 0; } here is my makefile: C_SOURCES= main.c monitor.c common.c S_SOURCES= boot.s C_OBJECTS=$(patsubst %.c, obj/%.o, $(C_SOURCES)) S_OBJECTS=$(patsubst %.s, obj/%.o, $(S_SOURCES)) CFLAGS=-nostdlib -nostdinc -fno-builtin -fno-stack-protector -m32 -Iheaders LDFLAGS=-Tlink.ld -melf_i386 --oformat=elf32-i386 ASFLAGS=-felf all: kern/kernel .PHONY: clean clean: -rm -f kern/kernel kern/kernel: $(S_OBJECTS) $(C_OBJECTS) ld $(LDFLAGS) -o $@ $^ $(C_OBJECTS): obj/%.o : %.c gcc $(CFLAGS) $< -o $@ vpath %.c source $(S_OBJECTS): obj/%.o : %.s nasm $(ASFLAGS) $< -o $@ vpath %.s asem Hopefully this will help you understand what is going wrong and how to fix it :L Thanks in advance. Jamie.

  Read the article

• Unable to store NSNumber in core data

  - by Kamlesh

  Hi all, I am using Core Data in my application.I have an attribute named PINCode which has property Int64. Now,in my app I take the PIN code from a text field,convert it into NSNumber and try to store as an attribute value for an entity.But I am unable to do so.The exception that it shows on the console is:- Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: 'Unacceptable type of value for attribute: property = "PINCode"; desired type = NSNumber; given type = NSCFString; value = 121.' Here is the code:- (Conversion to NSNumber):- NSString *str= txtPINCode.text; NSNumber *num = [[NSNumber alloc]init]; int tempNum = [str intValue]; num = [NSNumber numberWithInt:tempNum]; (Storing in core data entity):- NSManagedObjectContext *context = [appDelegate managedObjectContext]; NSManagedObject *newContact; newContact = [NSEntityDescription insertNewObjectForEntityForName:@"MemberTable" inManagedObjectContext:context]; [newContact setValue:num forKey:@"PINCode"]; The app crashes at this point.I am unable to find the reason of crash.I have also tried to check the conversion by the following code:- NSNumber *testNumber = [[NSNumber alloc]init]; id test = num; BOOL testMe = [test isKindOfClass:(Class)testNumber]; Can anybody help me with this?? Thanks in advance.

  Read the article

• MKAnnotationView for userLocation pin iPhone

  - by Mauricio Galindo

  I have an application that uses MKMapView and at some point in the app I need to remove all the current pins in the map using [mapView removeAnnotations:mapView.annotations] And then I want to show again the current user location mapView.showUserLocation = YES But I can only make it reappear as a regular pin, because the userLocation view class its not public so I cant return views of that type. Here is my code - (MKAnnotationView *)mapView:(MKMapView *)theMapView viewForAnnotation:(id <MKAnnotation>)annotation MKPinAnnotationView* annView = (MKPinAnnotationView *)[mapView dequeueReusableAnnotationViewWithIdentifier:@"currentloc"]; if (!annView) { MKPinAnnotationView *annView=[[MKPinAnnotationView alloc] initWithAnnotation:annotation reuseIdentifier:@"currentloc"]; annView.pinColor = MKPinAnnotationColorRed; annView.animatesDrop=TRUE; annView.canShowCallout = YES; annView.calloutOffset = CGPointMake(-5, 5); if ([annotation isKindOfClass:[DraggableAnnotationAM class]] ) annView.draggable = YES; return annView; } else { if ([annotation isKindOfClass:[DraggableAnnotationAM class]] ) annView.draggable = YES; annView.annotation = annotation; return annView; } Also I have found through reflection that MKUserLocationView is the class that is used to display the current location, but because its not public its not safe to use and my app keeps crashing and Im sure theres a easier way. Is it possible to do what I want, or should I just never remove the user location annotation of the mapView? Thanks in advance

  Read the article

• Printing is not working in tomcat, when i start server with services.msc(From client side we could not print )

  - by maya

  I am using JasperReports 1.3.1 to print the report. I am sing eclipse and tomcat for development purpose. In eclipse, when i run the application, the below code will show the listed printer devices and print button. If i click the print button, the report is printing by selected device. PrintRequestAttributeSet printRequestAttributeSet = new HashPrintRequestAttributeSet(); printRequestAttributeSet.add(MediaSizeName.ISO_A5); PrintServiceAttributeSet printServiceAttributeSet = new HashPrintServiceAttributeSet(); JRPrintServiceExporter exporter = new JRPrintServiceExporter(); exporter.setParameter(JRExporterParameter.JASPER_PRINT, jasperPrint); exporter.setParameter(JRPrintServiceExporterParameter.PRINT_REQUEST_ATTRIBUTE_SET, printRequestAttributeSet); exporter.setParameter(JRPrintServiceExporterParameter.PRINT_SERVICE_ATTRIBUTE_SET, printServiceAttributeSet); exporter.setParameter(JRPrintServiceExporterParameter.DISPLAY_PAGE_DIALOG, Boolean.FALSE); exporter.setParameter(JRPrintServiceExporterParameter.DISPLAY_PRINT_DIALOG, Boolean.TRUE); exporter.exportReport(); Here I am passing jasperPrint as a parameter which i manually construted.Its working good My problem is: I created war file and pasted in tomcat Apache Software Foundation\Tomcat 6.0\webapps directory and started the tomcat by using services.msc. At this point, its not displaying the listed printer details and also not printing. I put some logger, I found that, the code is hanging with exporter.exportReport(); after this line code is not executing . Please suggest me for how to print from client side using jasper

  Read the article

• libpcap read packet size

  - by spicyramen

  I started to write an application which will read RTP/H.264 video packets from an existing .pcap file, I need to read the packet size. I tried to use packet-len or header-len, but it never displays the right number of bytes for packets (I'm using wireshark to verify packet size - under Length column). How to do it? This is part of my code: while (packet = pcap_next(handle,&header)) { u_char *pkt_ptr = (u_char *)packet; struct ip *ip_hdr = (struct ip *)pkt_ptr; //point to an IP header structure struct pcap_pkthdr *pkt_hdr =(struct pcap_pkthdr *)packet; unsigned int packet_length = pkt_hdr->len; unsigned int ip_length = ntohs(ip_hdr->ip_len); printf("Packet # %i IP Header length: %d bytes, Packet length: %d bytes\n",pkt_counter,ip_length,packet_length); Packet # 0 IP Header length: 180 bytes, Packet length: 104857664 bytes Packet # 1 IP Header length: 52 bytes, Packet length: 104857600 bytes Packet # 2 IP Header length: 100 bytes, Packet length: 104857600 bytes Packet # 3 IP Header length: 100 bytes, Packet length: 104857664 bytes Packet # 4 IP Header length: 52 bytes, Packet length: 104857600 bytes Packet # 5 IP Header length: 100 bytes, Packet length: 104857600 bytes Another option I tried is to use: pkt_ptr- I get: read_pcapfile.c:67:43: error: request for member ‘len’ in something not a structure or union

  Read the article

• L10N: Trusted test data for Locale Specific Sorting

  - by Chris Betti

  I'm working on an internationalized database application that supports multiple locales in a single instance. When international users sort data in the applications built on top of the database, the database theoretically sorts the data using a collation appropriate to the locale associated with the data the user is viewing. I'm trying to find sorted lists of words that meet two criteria: the sorted order follows the collation rules for the locale the words listed will allow me to exercise most / all of the specific collation rules for the locale I'm having trouble finding such trusted test data. Are such sort-testing datasets currently available, and if so, what / where are they? "words.en.txt" is an example text file containing American English text: Andrew Brian Chris Zachary I am planning on loading the list of words into my database in randomized order, and checking to see if sorting the list conforms to the original input. Because I am not fluent in any language other than English, I do not know how to create sample datasets like the following sample one in French (call it "words.fr.txt"): cote côte coté côté The French prefer diacritical marks to be ordered right to left. If you sorted that using code-point order, it likely comes out like this (which is an incorrect collation): cote coté côte côté Thank you for the help, Chris

  Read the article

• how do I get eclipse to use a different compiler version for Java?

  - by codeman73

  It seems like this should be a simple task, with the options in the Preferences menu for different JREs and the ability to set different compiler and build paths per project. However, it also seems to simply not work. For example, I have my JAVA_HOME set to a jre for Java 1.6. It's still not clear to me how Eclipse uses this, but it appears to be defaulting to this and not taking the project overrides. I have also installed Java 1.5, and added a JRE for this in eclipse in the Java-Installed JREs section. In my project, I've set the compiler compliance level to 1.5. In the build path for the project, I've added the System Library for the Java 1.5 JRE. However, I'm getting compile errors for a class that implements PreparedStatement for not implementing abstract methods that only exist in Java 1.6 PreparedStatement. Specifically, the methods setAsciiStream(int, InputStream, long) and setAsciiStream(int, InputStream) Strangely enough, it worked when we were compiling it against Java 1.4, which it was originally written for. We added the JREs for Java 1.4 and referenced that system library in the project, and set the project's compiler level to 1.4, and it works fine. But when I do the same changes to try to point to Java 1.5, it instead uses 1.6. Any ideas why?

  Read the article

• atk4 advanced crud?

  - by thindery

  I have the following tables: -- ----------------------------------------------------- -- Table `product` -- ----------------------------------------------------- CREATE TABLE IF NOT EXISTS `product` ( `id` INT NOT NULL AUTO_INCREMENT , `productName` VARCHAR(255) NULL , `s7location` VARCHAR(255) NULL , PRIMARY KEY (`id`) ) ENGINE = InnoDB; -- ----------------------------------------------------- -- Table `pages` -- ----------------------------------------------------- CREATE TABLE IF NOT EXISTS `pages` ( `id` INT NOT NULL AUTO_INCREMENT , `productID` INT NULL , `pageName` VARCHAR(255) NOT NULL , `isBlank` TINYINT(1) NULL , `pageOrder` INT(11) NULL , `s7page` INT(11) NULL , PRIMARY KEY (`id`) , INDEX `productID` (`productID` ASC) , CONSTRAINT `productID` FOREIGN KEY (`productID` ) REFERENCES `product` (`id` ) ON DELETE NO ACTION ON UPDATE NO ACTION) ENGINE = InnoDB; -- ----------------------------------------------------- -- Table `field` -- ----------------------------------------------------- CREATE TABLE IF NOT EXISTS `field` ( `id` INT NOT NULL AUTO_INCREMENT , `pagesID` INT NULL , `fieldName` VARCHAR(255) NOT NULL , `fieldType` VARCHAR(255) NOT NULL , `fieldDefaultValue` VARCHAR(255) NULL , PRIMARY KEY (`id`) , INDEX `id` (`pagesID` ASC) , CONSTRAINT `pagesID` FOREIGN KEY (`pagesID` ) REFERENCES `pages` (`id` ) ON DELETE NO ACTION ON UPDATE NO ACTION) ENGINE = InnoDB; I have gotten CRUD to work on the 'product' table. //addproduct.php class page_addproduct extends Page { function init(){ parent::init(); $crud=$this->add('CRUD')->setModel('Product'); } } This works. but I need to get it so that when a new product is created it basically allows me to add new rows into the pages and field tables. For example, the products in the tables are a print product(like a greeting card) that has multiple pages to render. Page 1 may have 2 text fields that can be customized, page 2 may have 3 text fields, a slider to define text size, and a drop down list to pick a color, and page 3 may have five text fields that can all be customized. All three pages (and all form elements, 12 in this example) are associated with 1 product. So when I create the product, could i add a button to create a page for that product, then within the page i can add a button to add a new form element field? I'm still somewhat new to this, so my db structure may not be ideal. i'd appreciate any suggestions and feedback! Could someone point me toward some information, tutorials, documentation, ideas, suggestions, on how I can implement this?

  Read the article

• Getting Depth Value on Kinect SDK 1.6

  - by AlexanderPD

  this is my first try on Kinect and Kinect SDK so I'm having a lot of "newbie issues" :) my goal is to point my mouse on the Kinect standard video output and get the depth value. I already have both normal video and depth video outputs by using the 2 "Color Basic-WPF" and "Depth Basic-WPF" samples, and handling mouse events or position is not a problem. In fact i already did all and i already got a depth value, but this value is always HIGHLY imprecise. It jumps from 500 to 4000 by just moving to the next pixel in a plane surface. So.. I'm pretty sure I'm reading the depth value in the wrong way. This is how i read it: short debugValue = depthPixels[x*y].Depth; debug.Text = "X = "+x+", Y = "+y+", value = "+debugValue.ToString(); i know it's pretty out of context, this little piece of code is inside the same SensorDepthFrameReady function in "Depth Basic-WPF"! "x" and "y" are the mouse coordinates and depthPixels is DepthImagePixel[] type, a temporary array filled with the "depthFrame.CopyDepthImagePixelDataTo(this.depthPixels);" instruction. Depth frame is filled here: DepthImageFrame depthFrame = e.OpenDepthImageFrame() the "e" comes from here: private void SensorDepthFrameReady(object sender, DepthImageFrameReadyEventArgs e) and this last one is called here: this.sensor.DepthFrameReady += this.SensorDepthFrameReady; how i must handle that depth value i get? I know the value must be between 800 and 4000 but i get values between about 500 and about 8000. i already google a lot (here on SO too) and i still can't understand if the depth value is 11 or 13 bit. The sdk examples uses shrink this value to 8 bit and this is making even more confusion in my head :(

  Read the article

• Setting an Excel Range with an Array using Python and comtypes?

  - by technomalogical

  Using comtypes to drive Python, it seems some magic is happening behind the scenes that is not converting tuples and lists to VARIANT types: # RANGE(“C14:D21”) has values # Setting the Value on the Range with a Variant should work, but # list or tuple is not getting converted properly it seems >>>from comtypes.client import CreateObject >>>xl = CreateObject("Excel.application") >>>xl.Workbooks.Open(r'C:\temp\my_file.xlsx') >>>xl.Visible = True >>>vals=tuple([(x,y) for x,y in zip('abcdefgh',xrange(8))]) # creates: #(('a', 0), ('b', 1), ('c', 2), ('d', 3), ('e', 4), ('f', 5), ('g', 6), ('h', 7)) >>>sheet = xl.Workbooks[1].Sheets["Sheet1"] >>>sheet.Range["C14","D21"].Value() (('foo',1),('foo',2),('foo',3),('foo',4),('foo',6),('foo',6),('foo',7),('foo',8)) >>>sheet.Range["C14","D21"].Value[()] = vals # no error, this blanks out the cells in the Range According to the comtypes docs: When you pass simple sequences (lists or tuples) as VARIANT parameters, the COM server will receive a VARIANT containing a SAFEARRAY of VARIANTs with the typecode VT_ARRAY | VT_VARIANT. This seems to be inline with what MSDN says about passing an array to a Range's Value. I also found this page showing something similar in C#. Can anybody tell me what I'm doing wrong? EDIT I've come up with a simpler example that performs the same way (in that, it does not work): >>>from comtypes.client import CreateObject >>>xl = CreateObject("Excel.application") >>>xl.Workbooks.Add() >>>sheet = xl.Workbooks[1].Sheets["Sheet1"] # at this point, I manually typed into the range A1:B3 >>> sheet.Range("A1","B3").Value() ((u'AAA', 1.0), (u'BBB', 2.0), (u'CCC', 3.0)) >>>sheet.Range("A1","B3").Value[()] = [(x,y) for x,y in zip('xyz',xrange(3))] # Using a generator expression, per @Mike's comment # However, this still blanks out my range :(

  Read the article

• RSA_sign and RSACryptoProvider.VerifySignature

  - by Miky D

  I'm trying to get up to speed on how to get some code that uses OpenSSL for cryptography, to play nice with another program that I'm writing in C#, using the Microsoft cryptography providers available in .NET. More to the point, I'm trying to have the C# program verify an RSA message signature generated by the OpenSSL code. The code that generates the signature looks something like this: // Code in C, using the OpenSSL RSA implementation char msgToSign[] = "Hello World"; // the message to be signed char signature[RSA_size(rsa)]; // buffer that will hold signature int slen = 0; // will contain signature size // rsa is an OpenSSL RSA context, that's loaded with the public/private key pair memset(signature, 0, sizeof(signature)); RSA_sign(NID_sha1 , (unsigned char*)msgToSign , strlen(msgToSign) , signature , &slen , rsa); // now signature contains the message signature // and can be verified using the RSA_verify counterpart // .. I would like to verify the signature in C# In C#, I would do the following: import the other side's public key into an RSACryptoServiceProvider object receive the message and it's signature try to verify the signature I've got the first two parts working (I've verified that the public key is loading properly because I managed to send an RSA encrypted text from the C# code to the OpenSSL code in C and successfully have it decrypted) In order to verify the signature in C#, I've tried using the: VerifySignature method of the RSACryptoServiceProvider but that didn't work. And digging around the internet I was only able to find some vague information pointing out that .NET uses a different method for generating the signature than OpenSSL does. So, does anybody know how to accomplish this?

  Read the article

• When is someone else's code I use from the internet "mine"?

  - by robault

  I'm building a library from methods that I've found on the internet. Some are free to use or modify with no requirements, others say that if I leave a comment in the code it's okay to use, others say when I use the code I have to attribute the use of someone's code in my application (in the credits for my app I guess). What I've been doing is reorganizing classes, renaming methods, adding descriptions (code comments), renaming the parameters and names inside the methods to something meaningful, optimizing loops if applicable, changing return types, adding try/catch/throw blocks, adding parameter checks and cleaning up resources in the methods. For example; I didn't come up with the algorithm for blurring a Bitmap but I've taken the basic example of iterating through the pixels and turned it into a decent library method (applying the aforementioned modifications). I understand how to go about building it now myself but I didn't actually hit the keystrokes to make it and I couldn't have come up with it before learning from their example. What about code people get in answers on Stackoverflow or examples from Codeproject? At what point can I drop their requirements because at n% their code became mine? FWIW I intend on using the libraries to create products that I will sell.

  Read the article

• General Address Parser for Freeform Text

  - by Daemonic

  We have a program that displays map data (think Google Maps, but with much more interactivity and custom layers for our clients). We allow navigation via a set of combo boxes that prefill certain fields with a bunch of data (ie: Country: Canada, the Province field is filled in. Select Ontario, and a list of Counties/Regions is filled in. Select a county/region, and a city is filled in, etc...). While this guarantees accurate addresses, it's a pain for the users if they don't know where a street address or a city are located (ie, which county/region is kitchener in?). So we are looking at trying to do an address parser with a freeform text field. The user could enter something like this (similar to Google Maps, Bing Maps, etc...): 22 Main St, Kitchener, On And we could compartmentalize it into sections and do lookups on the data and get to the point they are looking for (or suggest alternatives). The problem with this is that how do we properly compartmentalize information? How do we break up the sections and find possible matches? I'm guessing we wouldn't be guaranteed that the user would enter data in a format we always expected (obviously). A follow up to this would be how to present the data if we don't find an exact match (or find multiple exact matches... two cities with the same street name in different counties, for example). We have a ton of data available in the mapping data (mapinfo tab format mostly). So we can do quick scans of street names, cities, states, etc. But I'm not sure about the best way to go about approaching this problem. Sure, using Google Maps would be nice, bue most of our clients are in closed in networks where outside access is not usually allowed and most aren't willing to rely on google maps (since it doesn't contain as much information as they need, such as custom map layers). They could, obviously, go to google and get the proper location then move to our software, but this would time consuming and speed of the process can be quite important.

  Read the article

• Using Doctrine to abstract CRUD operations

  - by TomWilsonFL

  This has bothered me for quite a while, but now it is necessity that I find the answer. We are working on quite a large project using CodeIgniter plus Doctrine. Our application has a front end and also an admin area for the company to check/change/delete data. When we designed the front end, we simply consumed most of the Doctrine code right in the controller: //In semi-pseudocode function register() { $data = get_post_data(); if (count($data) && isValid($data)) { $U = new User(); $U->fromArray($data); $U->save(); $C = new Customer(); $C->fromArray($data); $C->user_id = $U->id; $C->save(); redirect_to_next_step(); } } Obviously when we went to do the admin views code duplication began and considering we were in a "get it DONE" mode so it now stinks with code bloat. I have moved a lot of functionality (business logic) into the model using model methods, but the basic CRUD does not fit there. I was going to attempt to place the CRUD into static methods, i.e. Customer::save($array) [would perform both insert and update depending on if prikey is present in array], Customer::delete($id), Customer::getObj($id = false) [if false, get all data]. This is going to become painful though for 32 model objects (and growing). Also, at times models need to interact (as the interaction above between user data and customer data), which can't be done in a static method without breaking encapsulation. I envision adding another layer to this (exposing web services), so knowing there are going to be 3 "controllers" at some point I need to encapsulate this CRUD somewhere (obviously), but are static methods the way to go, or is there another road? Your input is much appreciated.

  Read the article

< Previous Page | 710 711 712 713 714 715 716 717 718 719 720 721  | Next Page >