Search Results

Search found 2704 results on 109 pages for 'miguel ping'.

Page 72/109 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• VMware postfix server drops connection

  - by nicoX

  Our physical server godzilla forwards mails to our virtuall VMware server b4. They are on the same net. Often connection drops, we can't ping godzilla with our b4. That means mails from godzilla won't reach b4 and the mails will be in handed into the mailq. Sometimes it takes some hours and the issue will auto fix itself, b4 will wake up and the mail will be delivered. Another thing if we remotely ssh into the b4, the b4 will wake up and and receive any mailq mails from godzilla and deliver them. netadmin@b4:/var/log$ arp -a ? (192.168.209.80) at 00:1E:C9:AE:79:9D [ether] on eth0 root@godzilla:/usr/local/bin# arp -a ? (192.168.209.20) at 00:50:56:91:7d:b2 [ether] on eth0

  Read the article

• Slow website load with CNAME, fast when using IP

  - by Nate Strandberg

  I setup two DNS servers on my network: ns1.byte-werx.com && ns2.byte-werx.com I can ping the DNS servers and get a fairly good response time, when I dig them I also get a fairly reasonable response, but any website I filter through them is painfully slow (an upwards of 20+ seconds) -- verifiable by performing a tracert or attempting to access the URL in a browser. The DNS servers are running CentOS 6.3 and BIND9 with 500MB of memory (I figure that should be more than enough?). I have a reverse look-up zone (1.168.192) along with two website zones (www.byte-werx.com and www.stayhomedental.com) If I access the websites using their IP the page loads nearly instantly so I do not believe the issue is with the hosting server, but that is running Ubuntu Server 12.04 and Apache2 with 12GB memory. Any thoughts? I do not have the named.conf file in front of me but I can edit this post to include it if you feel it would be useful. Thanks for any advice!

  Read the article

• Apply SetEnvIf after Apache RewriteRule

  - by coneybeare

  I have a working apache rewrite rule: RewriteCond %{HTTP_HOST} ^.*foo.com RewriteRule (.*) http://bar.com$1 [R=301,QSA,L] and some working dontlog SetEnvIfs: SetEnvIf Request_URI "^/server-status$" dontlog SetEnvIf Request_URI "^/home/ping$" dontlog SetEnvIf Request_URI "^/haproxy-status$" dontlog SetEnvIf User-Agent ".*internal dummy connection.*" dontlog CustomLog /var/log/apache2/access.log combined env=!dontlog but I can't figure out how to stop the RewriteRule from logging a duplicate line. foo.com and bar.com are both on the same machine. I would expect this rule to work, but it did not: SetEnvIf Host "foo.com" dontlog I still get duplicates in the Apache Log: 10.250.18.97 - - [06/Apr/2012:16:57:12 +0000] "GET / HTTP/1.1" 200 732 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3" 68.194.30.42 - - [06/Apr/2012:16:57:12 +0000] "GET / HTTP/1.1" 200 732 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/534.55.3 (KHTML, like Gecko) Version/5.1.5 Safari/534.55.3" .... where 10.250.18.97 is the server's IP. How can I prevent that RewriteRule from logging?

  Read the article

• teamviewer display is slow to refresh

  - by brunoais

  I'm using teamviewer from time to time to connect my portable computer with my desktop computer when I need to check on something (personal use). One of the main things I've been noticing is that it is quite slow transfering the screen updates that keep happening. This happens more frequently when I'm moving full windows or when I open a window or when watching a small movie clip. I've tested the lowest maximum p2p speed I ever got in the last week between both and it is the desktop's upload speed of 6MB/s with the ping of 40ms (usually ~15 ms). With this I was expecting to have very sharp image and fast transfer speeds which is not what is happening. Just to clarify, both computer's individual core's CPU is not reaching its peak (25%) while teamviewer is active, so the encryption and decryption is not the cause. Why my connection between both computers so slow?

  Read the article

• Can't find a wireless access point's IP address after changing router IP/LAN settings

  - by flagg19

  I have a modem/router, Netgear DG834, and a wireless access point (AP), Netgear WG602. The AP is directly connected to the router. My old working configuration was: Router IP address : 192.168.0.1 Access point IP address: 192.168.0.10 My new configuration is: Router IP address : 192.168.1.1 Access point IP address: ???.???.???.??? I changed my router's IP address/LAN settings to set up a VPN with another Netgear router that had the same LAN configuration. The wireless network is still up and perfectly working, but I can't find the AP's IP address. I've tried broadcast ping but the AP won't respond. I looked at the router "attached devices", but it's not there. I've played around with Nmap and arp request but the AP is totally invisible. I can fix it by resetting it to factory settings, but I'm very interested in learning more about this problem. I'm also interested in network security and this fact of having an invisible AP well, it's something I'd like to understand.

  Read the article

• how do I find the ip address of a host on a Windows network?

  - by user13743

  There is a machine on our network called owner-pc. I want to learn its ip address. I'm not sure which computer it is, and I don't want to trundle to each station to figure it out. When I ping it from the command line on a windows machine, I get something like this: Reply from: fe80::3039:2a21:3f57:f337%1: time<1ms Reply from: fe80::3039:2a21:3f57:f337%1: time<1ms Reply from: fe80::3039:2a21:3f57:f337%1: time<1ms Reply from: fe80::3039:2a21:3f57:f337%1: time<1ms How can I figure this out?

  Read the article

• How to troubleshoot slow powerconnect 62xx management interface

  - by Hannes

  Our Dell Powerconnect 62xx switches have a very high packetloss on the management interface. I presume this is caused by a new appliance which uses multicast for communication but I am not sure. Our network setup is following: servers a - Dell PC6248 | servers b - Dell PC6248 |- juniper core router servers c - Dell PC6248 | What we see is that the multicast traffic arrives at all servers (but only the servers b use the multicast) and I fear that this multicast traffic floods the switch management interface. The switches' management interfaces are reachable via vlan101, all other traffic is sent over other vlans. When I tcpdump on one of the 2 servers with a vlan 101 ip address, I only get a few arp requests but almost nothing. When I try to ping between these 2 servers, it works like a charm. I would like to know what a good way is to troubleshoot this problem and maybe help me understand what is going wrong on that subnet.

  Read the article

• How to fix unstable RJ45 jacks? [closed]

  - by BeemerGuy

  This is a little project I'm doing at home. I wanted to wire two rooms together (basically, the router is one room, and the switch is in the second room). So I ran a CAT5 between the two rooms, and wired an RJ45 jack in each room. I then hooked up the two jacks with two CAT5 cable to run it through the cable tester, and all 8 wires seem good. Now, when I connect the switch and the router, the connection is unstable -- I ping the router and it barely holds on for two pings before it disconnects, and stays in that unstable state. Just to make sure the router and the switch are ok, I connected them with long wire between the two rooms and the connection is absolutely stable, and pings continuously. What could be the cause for the unstable connection? Especially that it pings a few times, so there IS a connection. But why is it unstable? And how come the cable tester says it's ok, but it's unstable?

  Read the article

• Jumbo Frames on DIR-655

  - by Spookyone

  Hello, I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU Synology DS107+, Firmware 3.0-1337 Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• Script to restart BlackBerry services

  - by ICTdesk.net

  Can somebody give me a script advice/example of how to restart services? I have to restart 17 services, but the first 4 services have to be in the right order and after the restart command is given to one of the services, the next one should be started when the previous one is finished. I know I can restart a service by net command, and I can build a delay by for example a ping command that repeats for an x amount of times, but I never know in advance how long it is going to take for a service to restart. Thanks, Kindest regards, Marcel

  Read the article

• Apache Tomcat 6.0.29 startup causing Win XP SP3 reboot

  - by Liam

  Some of our Windows XP Developer machines die (black screen - no ping) when starting up Tomcat from a console. This only happens if the Tomcat debug console window is displayed (not minimised). When minimised, the startup / run is successful. I've checked for Tomcat logs and the crash sessions produce empty (zero bytes) tomcat log files. No system logs exist and no crash dump is created even though this is enabled in the Windows settings. The machine is dual screen and another machine with the same image has the same issue. The only clue is just before the crash, one of the monitors the system reports "Cannot display video mode 1280x1024" (approximate error, didn't write it down). Is there a way I can get Windows to produce log files of this crash session? Beyond running Tomcat as a service / minimised window, how can I fix (or even investigate)?

  Read the article

• Cannot connect to apache web server over internet

  - by user1658093

  I can access my apache 2.2 webserver from the lan ( at this case I use local IP aadress ) but I cannot connect externally ( from another network ). I changed apache to listen port 800, forwarded same port from router control panel, turned off windows and router firewalls. I use whatsmyip.com to get IP with what I try to connect. When I'm trying to connect I use : [whatsmyip.com IP]:800. Also, I can ping server IP externally. OS is windows7. Any ideas, suggestions? Thanks

  Read the article

• VPN connects but my browsers and messenger don't connect

  - by elizabeth chubbuck

  I have no problem VPN into work. As of last night, everything worked fine. But as of this A.M., none of my browsers connect and Microsoft Messenger will not connect. I did nothing, but had a pending a OSX update. I rebooted.. Still no internet. All network connections working, clearly, since VPN works. Its how I am doing this post now, is via VPN and remote desktopping to work computer. This just showed up as of this morning not working. I renewed DHCP, etc.. but cannot ping anywhere.

  Read the article

• Cisco Aironet 1200 Series AP Configuration

  - by nonterrorist

  I am attempting to configure a new CISCO Aironet 1200 Series Access Point to have a fixed IP. I have been searching online and I have come to the conclusion that the default IP address of this device is 10.0.0.1. These are the steps I have taken: My machine is plugged directly into the Ethernet port (not the Console port) of the AP. My Ethernet adapter is set to 10.0.0.2. I have reset the AP by holding the Mode button while powering up the device. The issue remains that I can not access 10.0.0.1 through the web, nor can I ping that address.

  Read the article

• How to troubleshoot latency between 2 linux hosts

  - by Jimm

  The latency between 2 linux hosts is about .23ms. They are connected by one switch. Ping & Wireshark confirm the latency number. But, i dont have any visibility into what is causing this latency. How can i know if the latency is due to NIC on host A or B or the switch or the cables? UPDATE: The .23 ms latency is bad for my existing application, which sends messages at very high frequency and i am trying to see if it can be brought down to .1ms

  Read the article

• Command to see all Windows commands

  - by open_sourse

  When I type help in windows command line, it lists a whole bunch of commands. However I find that there is a whole set of commands that do not appear in this list, for e.g. many networking commands such as ping, tracert, arp, netstat, net etc. I am sure that there is also a whole bunch of non-networking command which is also not listed. So my question is this. Why are these additional commands not shown in help? Is there a subset/group of commands only that help shows? Is there any command/method to list all the commands that can be executed in windows? (I am not talking about additional .exes that get added to path when some new software is installed..)

  Read the article

• How to connect 2 virtual hosts running on the same machine?

  - by Gabrielle

  I have 2 virtual hosts running on my Windows XP laptop. One is Ubuntu running inside vmware player. The other is MS virtual PC (so I can test with IE6 ). The Ubuntu virtual host is running my web application with apache. I can point my browser on my laptop at the Ubuntu IP and view my web app. I read this post http://stackoverflow.com/questions/197792/how-to-connect-to-host-machine-from-within-virtual-pc-image and was able to get my Virtual PC to ping my physical machine using the loopback adapter. But I'm stuck on getting my Virtual PC to see my web application running in the Ubuntu vmware player host. I appreciate any suggestions.

  Read the article

• Server 2008 unresponsive after SP2 install.

  - by Dan

  I have a dev server that has an exact image of a production web server. The prod server only has SP1 installed on it. When I first fired up the dev box, the first thing I did was install SP2, and let it be. Almost every morning when I came in, the server was unusable. It would respond to ping, but RDP and the web site running on it were down. On the screen the screen saver was bouncing around, so it wasn't hard locked. But it was unresponsive to keyboard and mouse. So now I have to hard shut it down, but when it comes back up, the only thing in the event viewer is the unexpected shutdown, nothing else. I've since taken a fresh image of my prod box and put it on the dev server, and not installed SP2, and the dev box is humming along perfectly. I should also note that this is Server2k8 Web, 64bit Has anyone else seen anything like this?

  Read the article

• What could be the maximum number of hosts on a 100BaseTX ethernet network ?

  - by snowflake

  Hello, I'm having two ip networks (192.168.1.x and 192.168.2.x) bridged on a server, but all hosts (fixed IPs) are on the same physical 100BaseTX ethernet (with a daisy chain of 48ports switchs). Often, I loose link between the server and hosts of the second network. Usually if I reboot the host, the connection work again, and if I force connection to be active, the connection keep alive until I ping after a while without active connection. I'm wondering how many hosts can be connected on the same network without troubles, and eventually how many switches can be daisy chained ? I suppose maximum length between hosts to be 100meters to the hub or 200meters between extremity of the network. Somebody is suggesting 8 switches here : http://www.tek-tips.com/viewthread.cfm?qid=1137879&page=12 Any comments on how to find a solution to the problem and not answering directly to the question are welcomed!

  Read the article

• OS X server VPN local ip

  - by gbrandt

  Hi all, I have 10.6.2 server on the internet. I want to vpn into it to get access. I start VPN and it gives me an address in the range I have set 192.168.2.100-192.168.2.105. However the server itself does not have a local ip of 192.168.2.x so I cannot ping it or ssh into it or anything. The machine VPNing gets an ifconfig entry that looks like this: ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280 inet 192.168.2.100 --> 70.72.xxx.xxx netmask 0xffffff00 Where I think it should get: ppp0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280 inet 192.168.2.100 --> 192.168.2.1 netmask 0xffffff00 I can't find anywhere to set the local vpn IP address. And I can't find a pptpd.conf file either. Any help is appreciated.

  Read the article

• puppet agent doesn't retrieve files from master

  - by nicmon

  I have a very basic question regarding to Puppet 3.0.1 configuration. I setup a puppet master server (CentOS) with 2 agents (CentOS and Windows 7), all 3 can ping and access each other. There is no error at all. I have copied a file under /etc/puppet/files/test2.txt my site.pp (/etc/puppet/manifests) contains these lines: node default { include test file { "/tmp/testmaster.txt": owner => root, group => root, mode => 644, source => "puppet:///files/test2.txt" } } but there will no file be created on agent servers under /tmp/ once I run "puppet agent --test" here is the output: [root@agent1 ~]# puppet agent --test Info: Retrieving plugin Info: Caching catalog for agent1.mydomain.com Info: Applying configuration version '1354267916' Finished catalog run in 0.02 seconds "puppet apply /etc/puppet/manifests/site.pp" creates the testmaster.txt under /tmp/ on master.

  Read the article

• Vista to Vista network visability issue

  - by Sk93

  Hi All, I've got a Vista Business PC and a Vista Business Laptop connected via a virgin media router (Netgear CG2100D) and I cannot get the two machines to see each other correctly over the network. The laptop is connected via wireless, whilst the pc is wired. Both are set to recieve their network settings automatically (DHCP) and both have the windows firewall (the only firewall on either) turned off completely. I can ping each machine fine from one another using the ip addresses, and I can also connect via \. However, connections via \ fail, and I cannot see the machines in the network map. I have tried turning netBIOS to be "always on" on both adapters, but this makes no difference. I've been messing around pretty much for 6 hours now and am getting quite fustrated by this! (my original aim was to get media sharing working, but I've pretty much abandoned that for now). Any ideas?

  Read the article

• apache httpd cannot browse through browser

  - by nuttynibbles

  i've setup apache and php on a virtual machine. everything works fine in the virtual machine. im able to execute php files and run up phpmyadmin connecting to mysql. on my host machine, im able ping and ssh into the remote machines. however, im unable to browse the php files on the host browser using the ip address. in my httpd.conf, im listening to port 80. i enabled the ServerName 192.168.75.102:80 am i missing some settings? port settings maybe?

  Read the article

• VPN is working, except for DNS lookups. Firewall (Cisco ASA 5505) issue?

  - by macke

  I've got the following set up: LAN -> DHCP / DNS / VPN server (OSX 10.6) -> Cisco ASA 5505 -> WAN Connecting to the LAN via VPN works fine. I get all the details properly and I can ping any host on the internal network using their IP. However, I can't do any host lookups whatsoever. I've looked through the logs on and found this nugget in the firewall log: 3 Sep 08 2010 10:46:40 305006 10.0.0.197 65371 portmap translation creation failed for udp src inside:myhostname.local/53 dst inside:10.0.0.197/65371 Port 53 is dns services, no? Because of that log entry, I'm thinking that the issue is with the firewall, not the server. Any ideas? Please keep in mind that I have very little knowledge and experience with this kind of firewall and the little experience I do have is with the ASDM GUI console, not the CLI console.

  Read the article

• Network monitoring library, or objects, for a cloud

  - by Andrew Smith

  I am looking for library to support server / switch monitoring, to actually be able to check with the device if it's working OK. However this requires some sort of auto-detection and device support. Basically I need to automatically detect a new device, start monitoring it like CPU and PING. So how do I auto-detect the machine remotely, this is something I need library for. Rackspace has something like this - "Cloud Monitoring API". But is there anything opensource which can be used same way? The Nagios and others doesnt have such API, and the big and expensive systems are too big to handle in public cloud, so there must be some other network monitoring engine with API, which can add a new servers automatically and support user isolation for example so I dont see other servers except mine.

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >