Search Results

Search found 2616 results on 105 pages for 'yi ping'.

Page 72/105 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Can't see a Windows XP computer on the network

  - by user56614

  I have two PC's connected to the same router. One is running Vista Home Premium and the other is running XP Pro. I'm trying to reach the shares of second PC from the first PC. I've enabled file sharing on the XP PC, I've disabled firewall and defender, and I can successfully ping it from the Vista PC. Both computers are set to the same workgroup "WORKGROUP". However, if I try to type "\\192.168.1.2" in Windows Explorer (192.168.1.2 being the IP address of the XP PC), I get a message: "Windows can't access \\192.168.1.2... Error code: 0x80004005 Unspecified error". And If I type "net view \\192.168.1.2" in command prompt, I get "System error 53 has occurred. The network path was not found." Am I missing something trivial?

  Read the article

• Error 800 while connecting to VPN

  - by Aamir

  I am trying to connect to my office network through VPN. It used to work fine earlier but now as soon as I hit connect, I get Error 800: Error 800: Unable to establish VPN Connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. I am using Windows XP and I am able to ping the VPN server successfully. I have Symantec Endpoint Protection installed (if it matters). I have tried disabling it as well but nothing changes.

  Read the article

• ssh can't connect after server ip changed

  - by Kery

  I have a server with ubuntu installed. After I change the network configuration and restart server, ssh client can't connect server any more. But in the server I can use ssh client to connect itself and the netstat command shows that sshd is listening port 22. And in my computer (win7) ping command is OK to server's new IP. The configuration in /etc/network/interfaces is: auto eth0 iface eth0 inet static address 10.80.x.x netmask 255.255.255.0 gateway 10.80.x.1 I'm very confused about this. Hope somebody can give me some idea. Thank you in advance!!!

  Read the article

• Linux server failover

  - by Lukasz

  I have two Linux servers (CentOS6) - both are identically configured connected to the same switch with a direct link between them. I only have one external IP that is assigned to eth0 on both servers (connected to the internet switch) with the interface shutdown on server 2. How can I failover to server 2 if server 1 dies - as stated they are linked directly so they can check for availability of each other via ping/tcp/udp. I toyed with Heartbeat but the documentation seems to be non-existent - not sure how to bring up an interface and start some services if the other server dies.

  Read the article

• one of my web hostings is down - only for me - why ?

  - by Thomas Traub

  My first post here, I am reading / learning a lot, thanks ;). I've got a mysterious issue (for me) and would really appreciate to get it solved. I've rent a reseller package with bibihost.com and it's now the second time that all my domaines the hoster's site are unavailable from my connection (my Mac and my iPhone), (in browser, per FTP, ping, ab, and traceroute) This has never before happened to me with other web addresses. traceroute get's always stuck at a specific server 40g.vss-1-6k.routers.chtix.eu (91.121.131.29) The sites are all up for everyone else, I've checked with downforeveryoneorjustme.com, a homegrown script loaded to another server and montastic.com My question(s) : Why am I blocked ? Is there anything I can do about it ? If I cannot solve this issue I have to change the hoster, but I really would like to know what's going on. my domaines on this server : tienstiens.fr tomlegrand.com

  Read the article

• Unable to browse one server unless using FQDN all others work.

  - by Reg

  Hello - I installed 4 new Windows 2008 R2 Servers. All are joined to the domain. One out of the four will not browse to our DC without using a FQDN. I can ping the DC server and see it in Network neighborhood but when I click on it I get Windows cannot access \SERVER. BUT accessing it by using \server.domain works fine. It is only having problems with the one DC server. Able to browse every other server with UNC without using FQDN.This is the only machine on our domain that is experiencing the problem and have tried different user accounts.

  Read the article

• Uploading to YouTube makes all browser tabs and devices disconnect

  - by fabsenet

  Whenever I upload a video to YouTube all other browser tabs behave like there is no connection at all. It even affects my phone and other computers on the network therefor I think it has to do with my router. When the upload is done everything works normally again. I never observed this behavior with any other upload. My router is a Fritz!Box 7390 and my uploading PC is connected through a 1000mb/s switch (wired) to the router. Uploading through another browser does not change anything. I understand that other sites become slow as the network resources are limited, but stopping altogether feels wrong. speed.io measures for my internet connection: 40.894 Kbit/s down, 2.685 Kbit/s up, 29 ms ping, 2.048 con/m connects

  Read the article

• User WinWget to keep web site alive in a Windows Server 2003

  - by Menelaos Vergis

  I have a site that must stay alive due to a service that runs and check a directory for changes. The site is running in IIS at a Windows Server 2003 and the solution I came up it that I will Schedule a task that requests the home page every 5 minutes. I am sure that this way the site will stay alive almost all the time. I have downloaded Wget from Wget from Windows and I have installed it at my windows server 2003 but I don't know how to use it in order to ping the server but not download anything. Since I want to use this forever I don't want to save anything on the disk, can you provide me with the command that pings a web page but don't save anything on the disk?

  Read the article

• output redirection not happening completely

  - by Gaurav

  I am running the following command on ubuntu 12.04 bash shell: hping3 -S -p 80 -c 30 www.google.com >> outputfile.txt But the problem is that this leaves some lines in the end and doesn't copy in the file. I even tried hping3 -S -p 80 -c 30 www.google.com >> outputfile.txt 2>&1 It also gives same problem. However this works perfect: ping -c 30 www.google.com >> outputfile.txt Any idea about what I might be missing?

  Read the article

• Remote Desktop connection breaks the wireless connection

  - by Michal Talaga

  When I connect to my Windows 8 Professional machine via Remote Desktop (RDP) I almost always get my WiFi connection broken. The setup: T61P Lenovo Laptop + W8 at home Wireless Router with NAT forwards connections to that machine Windows 7 laptop at work connecting to the home laptop When I connect, very often I get to login and suddenly connection is lost and I cannot reconnect again. When I get home I find my WiFi connection is still connected to the Access Point but does not function. Can't even ping the router. What is strange is that disabling wireless with the hardware switch and enabling it again doesn't help. The only way to make it works again: - Reboot - Disable wifi with hardware switch AND disable the network card in Device Manager, then enable both I did not have this problem on the very same laptop when it was running Windows 7. Any hint how can I find where the problem is?

  Read the article

• How to reply some request from which routes its came from?

  - by tacoen

  I wonder if we can reply some request from which route its came from? My Situation is like this: eth0 192.168.10.1 --> gw: 192.168.10.254 nm: 24 eth1 192.168.11.1 --> gw: 192.168.11.254 nm: 24 Since this two IP is on the same machine, normally when we ping to 192.168.11.1 from 192.168.10.2. This machine will not reply to 192.168.10.2 because 192.168.10.0/24 it's on eth0, and the packets where requested via eth1. Can I make it works? I'm using Linux ubuntu, and the application will be listen to eth1 only.

  Read the article

• How can I set an arbitrary (non default) attribute for an AD user or AD Contact?

  - by makerofthings7

  I have AD Users, or contacts that are not Exchange Mailbox users, or contacts. I also have a SSO system (Ping Identity... technology similar to Microsoft ADFS), where it leverages the AD Schema attribute: CustomAttribute1 to store information needed for SSO. This CustomAttribute1 was created by the Exchange Schema. I would like to use CustomAttribute1 for both AD Users and AD Contacts, as well as the Exchange equivalent user and contacts. Question Since the Exchange tools will only allow me to modify "Exchange" users, what is the way to modify the AD counterpart? e.g. if the following command sets a mailbox... set-mailbox -Identity [email protected] -CustomAttribute1 [email protected] -WarningAction silentlyContinue What command will allow me to update an AD user (non-mailbox) under the same schema attribute?

  Read the article

• Windows Internet Connection Issue (HELP)

  - by semajjames1399

  I have a windows 8 hp dual booting ubuntu. When i log onto windows i cant get on the internet... But skype and other applications can just now webpages in a browser what so ever (this is on windows 8). But on ubuntu i have no internet issues at all. From what i see right now its only the browsers in windows 8 that cant get the internet, and ive tried all the browsers i had (chrome, ie, firefox) and they cant connect but in the win8 notification area it says im connected. I can even ping via cmd. HELP! Thanks. Whats not working is that i cant get access the internet through the windows 8 broswer.

  Read the article

• What special configuration is needed to have a domain controller with DNS on a VM in Hyper-V?

  - by Michael J. Gray

  I have a server running Windows Server 2012 and it only has the Hyper-V role. I have a VM also running Windows Server 2012 and it has the Active Directory: Directory Services and DNS ([example.com]) roles. It has been promoted to a domain controller for [example.com]. In the virtualization host I have joined the domain successfully. On a laptop on the network, it can ping my DNS that is inside the VM on the virtualization host. However, it can't resolve anything through the DNS. I figured it was a firewall issue where the DNS had the firewall allow rule, but the virtualization host did not. I added that, but it didn't fix the issue. On my laptop, I get "UnKnown can't find [example.com]: No response from server" immediately. There's no time out, it just comes back right away. What have I overlooked?

  Read the article

• Why can't I access the WebUI of my DNS-323 NAS after a firmware upgrade?

  - by anonymous2

  Hi Everyone, I just bought a D-Link DNS-323 NAS Enclosure, and have run into a problem. I read that the firmware that had shipped with (1.07) did not support 2TB drives, so I downloaded firmware 1.08. Turned on the device for thwe first time and went straight to the WebUI (everything looked/worked fine) Proceeded with the firmware update, completed successfully. Rebooted and I cannot access the WebUI. I can see the NAS connected via my router interface I can also ping the ip adress assigned, but I cannot access the WebUI or find it via D-Link easy search software. I have tried the factory reset button, but that does not seem to be doing anything, the square blue light just keeps flashing from the moment the unit is powered on, whether I press the reset button or not, and the symptoms remain the same... PS. I did/do not have any drives installed yet. Please help?

  Read the article

• ServerA can't access ServerB through UNC path. How do I troubleshoot?

  - by cparker4486

  All my servers are in the same domain on the same network. ServerA cannot access ServerB through UNC path. However DNS resolves correctly for ServerB from ServerA. For example "ping ServerB" works as expected. ServerB can reach ServerA through UNC path without any problem. Likewise all other servers and clients can reach ServerB through UNC path without any problem. The software firewall on ServerB is not turned on and there are no hardware firewalls getting in the way. This makes no sense and I don't know how to troubleshoot it. Nothing shows up in the event logs of ServerA and ServerB has one event (repeatedly): Event ID: 3019, Source: MrxSmb. ServerA is Server 2008 R2. ServerB is Server 2003 R2. I have other 2008 R2 servers that connect without any problem.

  Read the article

• Computer connects to lan, but not the internet

  - by Jay

  I have a computer with Vista Home that can connect to the router, but it cannot get on the internet. I cannot ping google.com, the request times out. I've tried this on two separate networks and have no trouble with other computers connecting. I've renewed ipconfig, reset winsock, updated the wireless adapter, and the hosts file looks fine. I've tried disabling the firewall as well as a direct wired connection. I did a scan with Norton and it didn't find anything. Is there anything else I can try before resorting to a system restore? Update (Copied from Answer) Windows Update was able to find updates and install them (though, they could have already been downloaded previously). When I pinged Google by using their IP 66.102.9.103, it said it lost 25 percent of the packets. I successfully flushed the DNS but it didn't help. Also, I found safe mode with networking works fine.

  Read the article

• trying to set up wireless router, failing

  - by j j

  Hi, I am trying to set up Netgear's wireless-n WNR2000 router, following their oversimplified 5- step process for plugging in wires, and I'm not having any success. It comes down to: once everything is wired and turned on in the correct order, all of the LEDs match the image they give of 'what should be lit up', but their setup disk still doesn't find the router. They have a site to set up the router manually, www.routerlogin.net, which I cannot navigate to, even while wired directly to the router. http://192.168.1.1 doesn't connect to anything, either. The interesting part: i get ping replies from Google's DNS server at 8.8.8.8 while this is set up. but cannot connect to any web site by name, since the router's DNS isn't set up. One thought is that the router and modem both have the same IP address, so it's conflicting, but I'm not sure how I'd resolve that. Any ideas?

  Read the article

• How to configure OpenVPN server to use custom default gateway?

  - by Arenim

  I have a vpn server at address 10.1.0.2 and the server have another ip in it's network -- 10.0.0.2 in his subnet (it's a tun2socks router). But default server's gateway is NOT 10.0.0.2 (and it's ok) but another external IP. I want all the client's traffic to be forwarded through this ip address -- 10.0.0.2. Here is part of my server's config: dev tap0 server-bridge 10.1.0.1 255.255.255.0 10.1.0.50 10.1.0.100 push "route 10.0.0.0 255.255.255.0" ; now client can ping 10.0.0.2 push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 10.1.0.1" push "dhcp-option WINS 10.1.0.1" in fact i want some like push "redirect-gateway 10.0.0.2" How can I achieve this?

  Read the article

• Server 2012r2 VPN DNS

  - by Tyron Gower

  Have an issue where onsite clients cannot resolve VPNusers. but VPN users can resolve onsite machines. example. USER! uses LAPTOP1 USER1 connects to VPN gets internal IP address of 10.243.0.200 USER1 pings SERVER1 - resolve to ip and gets reply USER1 RDP into SERVER1 (inside VPN) USER1 pings LAPTOP1 from SERVER1 resolves to ip address last assigned by DHCP (10.243.0.139) ping fails USER1 pings 10.243.0.200 from SERVER1 gets reply. Running Server 2012r2 It is a domain controller, DNS and VPN server. VPN is just configured with basic default settings. All VPN users have static IP setup in AD. Not sure where to go from here.

  Read the article

• Subdomain on a separate server (Windows/IIS) won't load default web site?

  - by DOTang

  I've got a domain hosted under godaddy.com. I set it up so that subdomain.mysite.com points to a different server which uses Windows/IIS (say for example ip 1.1.1.1). When I go to the subdomain I get no errors, but no webpage loads. In IIS under the default website I added a bindings for subdomain.mysite.com with the ip of 1.1.1.1, but still nothing loads, just a totally blank page. I know for sure the subdomain host is working correctly because when I ping my subdomain, the correct IP shows. What am I missing to get this working?

  Read the article

• DHCP server can't see other machines

  - by William

  Hi, I setup a private network from virtual machines and one of the machines is the DHCP server for the group. I want to specify a next-server for the DHCP server but I'm having trouble connecting to any of the machines that I lease IPs to. I'm just trying to do a simple ping/ssh to 10.0.0.252 (a machine with a lease) but it doesn't seem to respond. Any advice? I'm assuming I need to be able to connect to my next-server but maybe I'm wrong. Thanks.

  Read the article

• How to set up VPN connection? Virtual Box 3.1.4 installed. Host - Snow Leopard(Mac) Guest - Windows 7 (32-bit)

  - by user31954

  I have Virtual Box 3.1.4 installed. Host - Snow Leopard(Mac) Guest - Windows 7 (32-bit). I have installed Windows on my MAC because I need it for work. I cannot establish VPN connection (using NAT). I tried to use bridged adapter, and I lost my internet connection on my guest(wind7) completely. I don't know much about networking, so I need detailed instructions for his particular OSs. Could someone please help me with this? Some random details about my attempts: On my host Windows I get error 800 trying to VPN. I can ping server address from my guest Win 7 and I have VPN connection established from my host Mac. I do disable VPN on my Mac when tying to establish it through guest. I tried to VPN from Mac and see if Guest sees it. It doesn't. Thank you!

  Read the article

• How can I solve Windows PPTP VPN issues?

  - by Robin M

  I'm having persistent problems with Windows PPTP VPN connections. The VPN appears up whilst the tunnel won't transfer traffic (ping to a remote IP within the VPN works for a while, and then fails). The client receives routing information via DHCP. When the connection fails, the routing table is still correct so I don't think it's a routing problem. My internet connection is via an ADSL2 line. There's software to deal with PPTP problems, like TunnelRat, but I don't want to install v1.1 of the .NET framework and I'd rather get to the bottom of the problem (I have multiple VPN connections and some are more unreliable than others). What can I do to get to the bottom of this? Alternatively, what can I do to keep the connection alive?

  Read the article

• Can't connect to server from certain machines

  - by Joel Coel

  On a small college campus we have a VLAN setup for the computer labs. These machines get assigned IP addresses in the 192.168.7.xxx range. In the server room, all of the server are on the default VLAN and assigned an IP address in the 10.1.1.xxx range. For the most part this works, but the lab machines are unable to connect to one of the servers. They can't even ping it. They can talk to other servers on the same switch as this server just fine. At first I thought it might be a vlan issue, but I changed the server port vlan to match other known-working ports with no effect. Any ideas?

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >