Search Results

Search found 33223 results on 1329 pages for 'database firewall'.

Page 728/1329 | < Previous Page | 724 725 726 727 728 729 730 731 732 733 734 735  | Next Page >

• What is the IPv6 equivalent to IPv4 RFC1918 addresses?

  - by Kumba

  Having a hard time wrapping my head around IPv6 here. A lot of the lingo seems targeted at enterprise-level IPv6 deployments, discussing link-local, site-local, global unicast, scopes, etc. Not a lot of solid information on really small networks, like home networks. I want to check my thinking and make sure I am getting the correct translations from IPv4-speak to IPv6-speak. The first question is, what's the equivalent of RFC1918 for IPv6? Initial searches suggested there was no equivalent. Then I stumbled upon Unique Local Addresses (RFC4193), and that states that all ULA's should be assigned the prefix fc00, followed by a 40-bit random number in the routing prefix. This random number is to "prevent collisions when two IPv6 networks are interconnected" -- again, another reference to an enterprise-level function. If I have a small local LAN at home, numbered using 192.168.4.0/24, what's my equivalent in IPv6's ULA scope? Assuming I will never, ever, tie that IPv6 address into the real internet (a router will NAT & firewall it), can I ignore the RFC to an extent and go with fc00::4:0/120? It also seems that any address in fc00::/7 are to be globally routable. Does this mean I'll need extra protections so my router would not automatically start advertising these private IPv6 addresses to the world? Second question, what's this link-local thing? Reading suggests a default-assigned address in the fe80::/10 range that has the last 64bits of the address comprised of the interface's MAC address. Seems to be required, too, but I'm annoyed by the constant discussion of it in relation to enterprise networks. Third question, what is scope id for? Seems to be yet another term tossed around in relation to enterprise networks, especially when interconnecting them, but almost no explanation on the smaller home network level. Can I see a scope ID AND CIDR notation used together? I.e., fc00::4:0/120%6, or are scope IDs only supposed to be applied to a single /128 IPv6 address?

  Read the article

• VMWare Fusion cannot connect to the NAT connection on my Mac

  - by FFish

  I have been using VMWare Fusion on my Mac to check out my websites on localhost. Now I can't connect anymore with the NAT connection. There seems to be a problem with my IP address or Mac address? I have no idea what causes this, it was working fine before!? In the XP (SP2) VM, in the taskbar I see the Local Area Connection with the yellow warning icon. The bubble says: "This connection has limited or no connectivity. You might not be aisle to access the Internet or some network resources. For more information, click this message." Doing that opens up the Local Area Connection Status panel. In the Support tab, when I click the repair button I get following message: "Windows could not finish repairing the problem because the following action cannot be completed: Renewing IP address." I tried disabling my firewall and also XAMPP that I use as server on OSX. VMWware version: 3.1 VM: XP SP2 Mac OSX 10.6.3 Any help would be greatly appreciated.

  Read the article

• "Network Error - 53" while trying to mount NFS share in Windows Server 2008 client

  - by Mike B

  CentOS | Windows 2008 I've got a CentOS 5.5 server running nfsd. On the Windows side, I'm running Windows Server 2008 R2 Enterprise. I have the "Files Services" server role enabled and both Client for NFS and Server for NFS are on. I'm able to successfully connect/mount to the CentOS NFS share from other linux systems but am experiencing errors connecting to it from Windows. When I try to connect, I get the following: C:\Users\fooadmin>mount -o anon 10.10.10.10:/share/ z: Network Error - 53 Type 'NET HELPMSG 53' for more information. (IP and share name have been changed to protect the innocent :-) ) Additional information: I've verified low-level network connectivity between the Windows client and the NFS server with telnet (to the NFS on TCP/2049) so I know the port is open. I've further confirmed that inbound and outbound firewall ports are present and enabled. I came across a Microsoft tech note that suggested changing the "Provider Order" so "NFS Network" is above other items like Microsoft Windows Network. I changed this and restarted the NFS client - no luck. I've confirmed that the share folder on the NFS server is readable/writable by all (777) I've tried other variations of the mount command like: mount 10.10.10.10:/share/ z: and mount 10.10.10.10:/share z: and mount -o anon mtype=hard \\10.10.10.10:/share * No luck. As per the command output, I tried typing NET HELPMSG 53 but that doesn't tell me much. Just "The network path was not found". I'm lost on how to proceed with troubleshooting. Any ideas?

  Read the article

• why does mysql have so many more open and fragmented tables than tables in the DB?

  - by kswift

  I've been working making our database run a little smoother and had good results over the past week. But there are still some things I dont understand. For one thing, the database has 25 tables. But mysql status shows 512 are open: mysqladmin status Uptime: 212854 Threads: 1 Questions: 43041 Slow queries: 7 Opens: 2605 Flush tables: 1 Open tables: 512 Queries per second avg: 0.202 I've read that isam opens extra file descriptors and a few other reasons why the number of open tables might be higher than 25, but I am guessing that 512 is not a good thing. Any suggestions on why this might be or what I should be looking into? I've also been using mysqltuner and its been helpful. But it has consistently listed the number of fragmented tables at 207. In phpmyadmin I've selected all the tables and optimized them several times. It hasn't reduced the number of fragmented tables that mysqltuner reports. I think I am missing some important concept about how this all works. Does anyone have any suggestions to point me in the right direction or narrow down google searches or just generally help me be less clueless? Thanks!

  Read the article

• Windows authentication to SQL Server via IIS and PHP

  - by Jeff

  We're running a PHP 5.4 application on Server 2008 R2. We would like to connect to a SQL Server 2008 database, on a separate server, using Windows authentication (must be Windows authentication--the DB admins won't let us connect any other way). I have downloaded the SQL Server drivers for PHP and installed them. IIS is configured for Windows authentication, and anonymous authentication has been disabled. $_SERVER['AUTH_USER'] reports our currently logged on Windows account. In php.ini, we have set fastcgi.impersonate = 1. When we setup a connection using the following code from Microsoft: $serverName = "sqlserver\sqlserver"; $connectionInfo = array( "Database"=>"some_db"); /* Connect using Windows Authentication. */ $conn = sqlsrv_connect( $serverName, $connectionInfo); if( $conn === false ) { echo "Unable to connect.</br>"; die( print_r( sqlsrv_errors(), true)); } We are presented with the following error message: Unable to connect. Array ( [0] => Array ( [0] => 28000 [SQLSTATE] => 28000 [1] => 18456 [code] => 18456 [2] => [Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. [message] => [Microsoft][SQL Server Native Client 11.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. ) Is it possible to connect to SQL Server 2008 via PHP using Windows authentication? Are there any additional required settings we need to make on IIS, SQL Server, or any other component (like a domain controller)?

  Read the article

• Bypassing SQUID on freebsd with PF

  - by epema

  I have PF+SQUID31 on FREEBSD-9.0, and I want to have some hosts(aka goodguys) to bypass the proxy, so that torrents are not logged. Also, I am not sure about transparent. It means that I dont have to configure proxy settings on the client side right? I have tried doing a redirect no rdr on $int_if inet proto {tcp,udp} from 192.168.1.233/32 to any However, no luck :( Here is a quick look of my conf files: SQUID /usr/local/etc/squid/squid.conf http_port 192.168.1.1:8080 transparent RC /etc/rc.conf: gateway_enable="YES" pf_enable="YES" pf_rules="/usr/local/etc/pf.conf" pflog_enable="YES" squid_enable="YES" I have squid31 installed from ports with SQUID_PF "Enable transparent proxying with PF" on PF /usr/loca/etc/pf.conf: int_if="re0" ext_if="bge0" localnet="{ 192.168.1.0/24 }" table <goodguys> const { "192.168.1.219", "192.168.1.233" } set block-policy drop set skip on lo0 scrub in all fragment reassemble scrub out all random-id max-mss 1440 block in on $ext_if pass out on $ext_if keep state block in on $int_if pass in on $int_if inet proto tcp from $int_if:network to $int_if port 8080 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 21 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 22 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 53 keep state pass in on $int_if inet proto tcp from $int_if:network to any port { smtp, pop3 } keep state pass in on $int_if inet proto icmp from $int_if:network to $int_if keep state pass out on $int_if keep state What lines should I add in conf files? I am assuming that the problem is on the firewall(pf).

  Read the article

• Exchange 2013 attachments too big?

  - by KPS

  I am having the toughest time sending large attachments, everywhere I have checked my file size limit for send/receive is 100mb but yet users are unable to receive files even at the size of 14mb. I'm using a spam filter (Appriver) and have worked with there support for a very long time, we see the following errors in logs 13:32:40.260 4 SMTP-000036([myserverIP]) rsp: 354 Start mail input; end with <CRLF>.<CRLF> 13:33:41.038 3 SMTP-000033([myserverIP]) write failed. Error Code=connection reset by peer 13:33:41.038 3 SMTP-000033([myserverIP]) [659500] failed to send. Error Code=connection reset by peer 13:33:41.038 4 SMTP([myserverIP]) [659500] batch reenqueued into tail Windows firewall is disabled on the exchange server, all other emails that are of smaller value come through just fine. Here is a print out of size limits: ConnectorType ConnectorName MaxReceiveMessageSize MaxSendMessageSize ------------- ------------- --------------------- ------------------ Send InternetSendConnector - 35 MB (36,700,160 bytes) Send Appriver-Smarthost - 35 MB (36,700,160 bytes) Receive Default EXCHSRVR 100 MB (104,857,600 bytes) - Receive Client Proxy EXCHSRVR 100 MB (104,857,600 bytes) - Receive Default Frontend EXCHSRVR 100 MB (104,857,600 bytes) - Receive Outbound Proxy Frontend EXCHSRVR 100 MB (104,857,600 bytes) - Receive Client Frontend EXCHSRVR 100 MB (104,857,600 bytes) - Receive ExchangeRelay 100 MB (104,857,600 bytes) - TransportConfig - 100 MB (104,857,600 bytes) 10 MB (10,485,760 bytes) ADSiteLink DEFAULTIPSITELINK Unlimited Unlimited There is a no anti-virus on the server either that could be interfering, I am out of ideas at this point :( EDIT 1 After running BPA, it gives and error: Exchange Organization: Check whether the incoming message(CN=MyDomain,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=WG,DC=local) size isn't set The maximum incoming message size isn't set in organization 'CN=MyDomain,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=WG,DC=local'. This can cause reliability problems. Here are the sizes as of now: [PS] C:\Temp>Get-TransportConfig | ft MaxSendSize, MaxReceiveSize MaxSendSize MaxReceiveSize ----------- -------------- Unlimited Unlimited [PS] C:\Temp>Get-ReceiveConnector | ft name, MaxMessageSize Name MaxMessageSize ---- -------------- Default EXCHSRVR 100 MB (104,857,600 bytes) Client Proxy EXCHSRVR 100 MB (104,857,600 bytes) Default Frontend EXCHSRVR 100 MB (104,857,600 bytes) Outbound Proxy Frontend EXCHSRVR 100 MB (104,857,600 bytes) Client Frontend EXCHSRVR 100 MB (104,857,600 bytes) ExchangeRelay 100 MB (104,857,600 bytes) Again, smaller emails come through just fine. Seems like there is a 10mb receive limit somewhere that I cannot find.

  Read the article

• IIS 8 URL Redirect on site level

  - by jackncoke

  I am trying to do a simple 301 perm redirect to another url in IIS 8. The end results would be if i navigated to domain2.com i would end up on domain1.com. We are moving from IIS 6 to a new server and have aprox 600+ sites that will be configured on this IIS 8 box. All of these sites run a property CMS and are looking at the same directory for source code. In IIS 6 i would just go to the Home directory tab of each site and check the box that says "Permanent Redirect" and provide a URL. With IIS 8 there is "HTTP Redirect" and this looks like it would do the trick but it is being applied to all the sites in IIS 8. Not on the site level like it use to be in IIS 6. I also looked into URL Rewriting module for IIS 8 but it seems to take rules in the style of a firewall and i am not sure if i could effectly create rules that would cater to 600+ sites. I am looking for the easiest way to have redirects on my site level so that that customers with multiple domains can have there sites redirect to there main domain for seo purposes. I feel like this was so easily achieved in IIS 6 that i must be overlooking something in the new version.

  Read the article

• Walkthrough/guide building aplication server for multi tenant web app [on hold]

  - by Khalid Adisendjaja

  The web app will detect a subdomain such as tenant1.app.com, tenant2.app.com, etc to identify tenant environment, each tenant environment will have a different database credential (port,db name,etc) but still connecting to the same database server. Each tenant should use app.com for their main domain, using their own domain is prohibitted. Each tenant will have their own rest api endpoint such as tenant1.app.com/api/v1/xxxx, tenant2.app.com/api/v1/xxxx, tenant3.app.com/api/v1/xxxx I've come to a simple solution by setting a wildcard subdomain (*.app.com) on webserver Apache/Nginx vhost configuration file. I have googled so many concept for building a multi-tenant app server but still don't understand how to really done it, what is the right way to do it and what is actually required to do this task. So I've come to this questions, Do I need a proxy server, dns masking, etc.. How to monitor each tenants activity What about server performance, load balancing, and scalability How to setup ssl certificate for each tenant what about application cache for each tenant Is it reliable to use the setup for production etc ... I have a very litte experience on server infrastructure, so I'm looking for a DIY walkthrough, step by step guide, or sophisticate solution ready to implemented for production

  Read the article

• How to configure a trusted connection between IIS 7 and SQL Server 2005?

  - by user1180652

  How do configure a trusted connection between IIS 7 and SQL Server 2005? My webapp was working fine with Windows Authentication enabled in IIS. Now, in order to solve a problem, we need to use a trusted connection. Unfortunately, enabling the trusted connection in the web.config broke the webapp. Oddly enough, when I run this application with trusted connection from my local dev machine (using the Cassini web server) IIS (Windows Server 2008) is running on one machine. The database (SQL Server 2005 but could migrate to 2008) is running on another machine. We are on a Windows domain running AD. All traffic is within our own firewall - no public access. Beyond that, I can't provide much info but I can find it. We're very "compartmentalized" (we have server people, security people, oracle people, SQL Server people, etc.) Thanks! Update 02/14/2012 0902: The webapp is now functional (app no longer broken) but the main issue is still unresolved. Now I have the app's application pool running as a domain account with permissions on the SQL Server box and IIS box. We were using this account to run the application but, and here's the problem, we need to log the real user name that made a change. When using the service account, the name of that service account appeared in the audit tables, making the auditing quite useless. So, not I'm at least running again. The connection string in the web.config is using "Trusted_Connection=True", the appPool is using a domain account with access to both boxes, BUT when I make a change (logged in as me) the name of the service account (appPool identity) is still logged in the audit tables. I also manually granted full permissions to the service account on the webapp folder. What do I need to do in order to log my name, not the service account, in the audit tables? Everything I'm reading says I need to establish a trusted connection between the two servers.

  Read the article

• SQL Server Offsite Backups

  - by Eric Maibach

  We have about !TB of SQL Server databases, and these databases generate about 200GB of data changes each day. Up to this point we have been doing Weekly full backups, daily diff backups, and hourly transaction log backups. The full and diff backups are backed up to tape and taken offsite each day. We have been trying to move away from tapes, and our IT department purchased a Barracuda Backup device that backups up data and then sends it offsite using our internet connection. I have been trying to get this to work for our SQL Server backups, and have ran into a number of problems. I normally like to just use SQL Server to perform backups instead of trying to use a agent, so that is what I tried first. However the Barracuda device was not able to dedup these files very well, so it ended up being to much data to try to send offsite and to archive. I then tried installing the Barracuda agent and using it to backup the SQL Server databases. However the problem I am having there is that on some of the database servers I also have files that need backed up, and I cannot find a way to create seperate backup schedules for the file backups and the SQL Server backups. Barracuda only does full or transaction log backups. So if I want to do hourly transaction log backups I end up doing a file system backup every hour (which is not good), or if I only schedule the backups to run once a night I either have to do a full backup every night, or only do a transaction backup once a day. None of these scenarios are good options. My question is, how is everyone else getting their large SQL Server database backups offsite. Are you just using tape, or have you found a offsite backup device that works well? Is anybody else using Barracuda to backup their SQL Server databases? If you do, then how do you have it setup?

  Read the article

• Why does MOSS sometimes delete an existing user from a site?

  - by Jesse

  I'm experiencing an issue with a MOSS installation. I am using the Site Settings Permissions to add an Active Directory account as a valid user of a site. This entails validating that the user account name is correct via the 'Check Names' button, then giving them 'Contribute' permissions. Once this is done they appear as a user on the 'All People' page. This works fine and the user is able to access the site. At some point in the future (sometimes several days later) the user account is somehow removed as a valid user from the site. This site resides in a test environment so access is pretty well controlled; which has allowed us to rule out someone else going in and removing the user manually. This appears to be something that is being done by the system itself and we have no idea why. We can manually add the user back, but then it will eventually get removed again later. I have an admittedly limited understanding of SharePoint permissions, but I believe that SharePoint stores valid users in a SQL database and I would assume that when dealing with Active Directory accounts it would be storing the user name and probably the SID. It appears that for some reason this record is later getting deleted out of the database, as the users will suddenly disappear from the "All People" page and will start getting "Access Denied: You are not authorized..." messages when trying to access the site. Has anyone seen this behavior before?

  Read the article

• Windows 7 - system error 5 problem

  - by ianhobson

  My wife has just had a new computer for Christmas (with an upgrade from VISTA to Windows 7), and has joined the home network. We are using a mix of WindowsXP and Ubuntu boxes linked via a switch. We are all in the same workgroup. (No domain). Internet access, DHCP, and DNS server is an SME server that thinks it is domain controller (although we are not using a domain). I need to run a script to back up my wife's machine (venus). In the past the script creates a share on a machine with lots of space (leda), and then executes the line. PSEXEC \\venus -u admin -p adminpassword -c -f d:\Progs\snapshot.exe C: \\leda\Venus\C-drive.SNA With the wife's old XP machine, this would run the sysinternals utility, copy shapshot,exe to her machine and run it, which would then back up her C: drive to the share on leda. I cannot get this to work with Windows 7, nor can I link through to the C$ share on her machine. This gives me a permissions error (system error 5). The admin account is a full admin account. And yes - I do know the password. The ordinary shares on her machine work fine! I guess I'm missing something that Microsoft have built into Windows 7 - but what? The machine is running Windows 7 business, with windows firewall, AVG anti virus, and all the crap-ware you get with a new PC removed. Thanks

  Read the article

• IP-dependent local port-forwarding on Linux

  - by chronos

  I have configured my server's sshd to listen on a non-standard port 42. However, at work I am behind a firewall/proxy, which only allow outgoing connections to ports 21, 22, 80 and 443. Consequently, I cannot ssh to my server from work, which is bad. I do not want to return sshd to port 22. The idea is this: on my server, locally forward port 22 to port 42 if source IP is matching the external IP of my work's network. For clarity, let us assume that my server's IP is 169.1.1.1 (on eth1), and my work external IP is 169.250.250.250. For all IPs different from 169.250.250.250, my server should respond with an expected 'connection refused', as it does for a non-listening port. I'm very new to iptables. I have briefly looked through the long iptables manual and these related / relevant questions: http://serverfault.com/questions/57872/iptables-question-forwarding-port-x-to-an-ssh-port-of-different-machine-on-the-n http://serverfault.com/questions/140622/how-can-i-port-forward-with-iptables However, those questions deal with more complicated several-host scenarios, and it is not clear to me which tables and chains I should use for local port-forwarding, and if I should have 2 rules (for "question" and "answer" packets), or only 1 rule for "question" packets. So far I have only enabled forwarding via sysctl. I will start testing solutions tomorrow, and will appreciate pointers or maybe case-specific examples for implementing my simple scenario. Is the draft solution below correct? iptables -A INPUT [-m state] [-i eth1] --source 169.250.250.250 -p tcp --destination 169.1.1.1:42 --dport 22 --state NEW,ESTABLISHED,RELATED -j ACCEPT Should I use the mangle table instead of filter? And/or FORWARD chain instead of INPUT?

  Read the article

• How to disable mod_security2 rule (false positive) for one domain on centos 5

  - by nicholas.alipaz

  Hi I have mod_security enabled on a centos5 server and one of the rules is keeping a user from posting some text on a form. The text is legitimate but it has the words 'create' and an html <table> tag later in it so it is causing a false positive. The error I am receiving is below: [Sun Apr 25 20:36:53 2010] [error] [client 76.171.171.xxx] ModSecurity: Access denied with code 500 (phase 2). Pattern match "((alter|create|drop)[[:space:]]+(column|database|procedure|table)|delete[[:space:]]+from|update.+set.+=)" at ARGS:body. [file "/usr/local/apache/conf/modsec2.user.conf"] [line "352"] [id "300015"] [rev "1"] [msg "Generic SQL injection protection"] [severity "CRITICAL"] [hostname "www.mysite.com"] [uri "/node/181/edit"] [unique_id "@TaVDEWnlusAABQv9@oAAAAD"] and here is /usr/local/apache/conf/modsec2.user.conf (line 352) #Generic SQL sigs SecRule ARGS "((alter|create|drop)[[:space:]]+(column|database|procedure|table)|delete[[:space:]]+from|update.+set.+=)" "id:1,rev:1,severity:2,msg:'Generic SQL injection protection'" The questions I have are: What should I do to "whitelist" or allow this rule to get through? What file do I create and where? How should I alter this rule? Can I set it to only be allowed for the one domain, since it is the only one having the issue on this dedicated server or is there a better way to exclude table tags perhaps? Thanks guys

  Read the article

• Log Shipping breaking daily on SQL Server 2005

  - by IT2

  I am facing a somewhat serious problem with Log Shipping on SQL Server 2005 and I am having trouble to correct it, so I will try some help from SF's experts. I have a Windows 2003 Server (PROD) that ships transactional log backups to another two servers: STAND1: Windows 2003 Server with SQL Server 2005. STAND2: Windows 2008 R2 Server with SQL Server 2005. The problem is that Log Shipping to STAND2 is breaking for ~ 90 minutes some times of the day and returning back without intervention. The breaking occur at times when the backup file is larger (after reindexing, etc). I can see the message below logged on the COPY job: *** Error: The specified network name is no longer available The copy agent was breaking dozens times a day only to STAND2 server, and after the changes below "only" breaks ~ two times a day: The frequency of the backup job was changed from 5 minutes to 10 minutes. Instead of backing up the 4 databases to the same folder, the log backups are now saved on separated folders for each database. The backup job doesn't run 24hs now, and only for 14 hours a day, when people are working on the database. I configured the SQL Server instances on the three servers to limit the memory, leaving more memory to the OS. Now I don't know what to do. Any help will be much appreciated! Thanks!

  Read the article

• filter / directing URLs coming onto a network

  - by Jon

  Hi all, I an not sure if this is possible or not but what i would like to do is as follows: I have one IP address (dynamic using zoneedit.com to keep it upto date). I have one webserver running my main site which is an Ubuntu machine running Apache. I also have a windows 2008 server running another site. Just to confuse things I also run part of my Apache site on the windows server, currently using proxypassreverse to get the information from it. So it looks something like this: IP 1.2.3.4 maps to mydomain.com as well as myotherdomain.com All requests that come into port 80 are forwarded to the Apache box and I use Virtualhost settings to proxy the windows sites where needed. so mydomain.com is an Apache site mydomain.com/mywindowssection is the Apache server using proxypassreverse to get part of the site from the Windows server myotherdomain.com uses Apache and proxypassreverse to get the whole site. What I would like to be able to do is forward all http requests that come into my network to one machine that figures out who should be serving that content. so: mydomain.com would go to the Apache machine myotherdomain.com would go the windows machine. I am just in the process of setting up an Astaro gateway (never done this before so taking a while to configure) as my firewall, dns, dhcp etc, don't know if this can handle it. I have the capacity to run a VM on the network if a seperate box would be needed for this process as well. Thanks for any and all feedback. Jon

  Read the article

• Juniper SSG 5 VPN

  - by Ethabelle

  I have a host who set up our Juniper SSG 5 VPN with Firmware version-6.2.0r5.0 I've been trying to set up VPN on it using this guide: http://kb.juniper.net/InfoCenter/index?page=content&id=KB4094 I've followed the steps and on my Mac, whenever I try to connect using L2TP over IPSec I get the following error; Summary of Steps: Create User (give them L2TP auth ability), Create Group, Place User in Group, Create VPN Gateway, Create VPN, create IP Pool, change default L2TP settings, create Untrust Trust Policy. The L2TP-VPN server did not respond. Try reconnecting. If the problem continues, verify your settings and contact your Administrator. I looked in my Firewall's logs, but I don't even see anything under Reports Logs Events. I'm.. obviously missing something, I just don't know what I'm missing at this point. I'm just starting networking and this is sort of Step 101 and I'm getting annoyed and just want to throw up OpenVPN, but I've read that has problems with Juniper Firewalls. Hooray.

  Read the article

• Iptables QUEUE Target and Snort

  - by bradlis7

  I'm trying to set up a firewall with support for snort, and it is dropping all of my packets when I add the QUEUE target. I've made it like this, but the QUEUE target is not allowing the packets to be processed any further: -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -j QUEUE -A INPUT -j ACCEPT # It's not allowing anything past QUEUE, as you can see below in the count. > iptables -I INPUT -nv pkts bytes target prot opt in out source destination 6707 395K ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 933 138K QUEUE all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 I'm eventually going to change it to forward, but I'm just trying to get it working for now. I start snort like so: snort -Q -D -c /etc/snort/snort.conf EDIT: More Information When I run it, it still sees the packets without having an iptables QUEUE target rule, but when I add a QUEUE target, it starts losing all of my packets. # snort -Qc /etc/snort/snort.conf -N -A console Enabling inline operation Running in IDS mode --== Initializing Snort ==-- Initializing Output Plugins! Initializing Preprocessors! Initializing Plug-ins! Parsing Rules file "/etc/snort/snort.conf" ## === CUT === *** *** interface device lookup found: bond0 *** Initializing Network Interface bond0 Decoding Ethernet on interface bond0 ## === CUT === Not Using PCAP_FRAMES So, it says inline, but the it says it's using bond0. Inline should not require an interface, right?

  Read the article

• Issue with multiple bridging for KVM hosts

  - by Henry-Nicolas Tourneur

  I'm using KVM and libvirt on my host (Debian lenny) + 2 bridges per guest (one for mgmt, one for public traffic). That setup isn't stable at all, sometimes I can do pings to a management ip, sometimes not. I don't know if my bridging paramateres are correct, could you check ? or if there is anything wrong ... Please also note that interface on guest doesn't flap and that I got not logs on my host. Of course forwarding is enabled. iface eth3 inet manual auto bond0 iface bond0 inet manual slaves eth1 eth2 pre-up ip link set bond0 up down ip link set bond0 down auto br0 iface br0 inet static address 10.160.0.7 netmask 255.255.255.128 bridge_ports eth3 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off auto br0:1 iface br0:1 inet static address 10.160.0.9 netmask 255.255.255.128 auto br0:2 iface br0:2 inet static address 10.160.0.10 netmask 255.255.255.128 auto br1 iface br1 inet static address 217.4.40.242 netmask 255.255.255.240 gateway 217.4.40.241 pre-up /etc/network/firewall start bridge_ports bond0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off auto br1:1 iface br1:1 inet static address 217.4.40.252 netmask 255.255.255.240 auto br1:2 iface br1:2 inet static address 217.4.40.253 netmask 255.255.255.240

  Read the article

• Apache22 on FreeBSD - Starts, does not respond to requests

  - by NuclearDog

  Hey folks! I'm running Apache 2.2.17 with the peruser MPM on FreeBSD 8.2-RC1 on Amazon's EC2 (so it's XEN). It was installed from ports. My problem is that, although Apache is running, listening for, and accepting connections, it doesn't actually respond to any or show them in the log at all. If I telnet to the port it's listening on and type out an HTTP request: GET / HTTP/1.1 Host: asdfasdf And hit enter a couple of times, it just sits there... Nothing. No response requesting with a browser either. There doesn't appear to be anything helpful in the error log: [Sun Jan 09 16:56:24 2011] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Sun Jan 09 16:56:25 2011] [notice] Digest: generating secret for digest authentication ... [Sun Jan 09 16:56:25 2011] [notice] Digest: done [Sun Jan 09 16:56:25 2011] [notice] Apache/2.2.17 (FreeBSD) mod_ssl/2.2.17 The access log stays empty: root:/var/log# wc httpd-access.log 0 0 0 httpd-access.log root:/var/log# I've tried with accf_http and accf_data both enabled and disabled, and with both the stock configuration and my customized config. I also tried uninstalling apache22-peruser-mpm and just installing straight apache22... Still no luck. I tried removing all of the LoadModule lines from httpd.conf and just re-enabled the ones that were necessary to parse the config. Ended up with only the following loaded: root:/usr/local/etc/apache22# /usr/local/sbin/apachectl -M Loaded Modules: core_module (static) mpm_peruser_module (static) http_module (static) so_module (static) authz_host_module (shared) log_config_module (shared) alias_module (shared) Syntax OK root:/usr/local/etc/apache22# Same results. Apache is definitely what's listening on port 80: root:/usr/local/etc/apache22# sockstat -4 | grep httpd root httpd 43789 3 tcp4 6 *:80 *:* root httpd 43789 4 tcp4 *:* *:* root:/usr/local/etc/apache22# And I know it's not a firewall issue as there is nothing running locally, and connecting from the local box to 127.0.0.1:80 results in the same issue. Does anyone have any idea what's going on? Why it would be doing this? I've exhausted all of my debugging expertise. :/ Thanks for any suggestions!

  Read the article

• Cannot connect to remote mail server for sending emails in ASP.NET

  - by Dave

  I want to migrate a web application from a Windows Server 2003 to a Windows Server 2008 R2. All works fine except sending emails from the application. If I configure the application to use the smtp server on "localhost" it works, but changing it to the "real" host name (e.g. mail.example.org) no mail is sent. The error message says, that the remote server needs a secure connection or smtp authentication. But since it works when using "localhost" instead of the host name I doubt that this is the problem. Also it's unlikely a problem with the mail server, I also tried it with another one. So for me it seems like the firewall is blocking the outgoing connection to the mail server. I tried to open port 25, but it still did not work. Maybe I just did it the wrong way. Update: For clarifying my setup: I have a Windows Server 2008 R2 with hMailServer installed (set up for some of the hosted domains) For the website I'm talking about I need to use an external mail server (totally different hosting provider) Apparently I was a bit off the track. It seems like it works when using connecting to the local mail server either with the host name "localhost" or "mail.somedomain.com" (while somedomain.com is set up in my mail server). But when using the host name of the external mail server ("mail.externaldomain.com") it seems like it tries to connect to the local server again, although this domain is not set up in the mail server. Thanks to Evan Anderson for the tip to use telnet - why I have not thought of it myself?... :-) Note, the website www.externaldomain.com is hosted on my server but the DNS entries are maintained by the other hosting provider. "externaldomain.com" is the only entry which points to my server all other records (MX, subdomains) are pointing to the other server. So I think the question is now, how do i bring my server to connect to the external mailserver. Do I have to configure this in my mail server or is it a windows server thing?

  Read the article

• Copy files from sub directories into one directory.

  - by Derek Organ

  Ok I have a bunch of files in this file structure format. /backup/daily/database1/database1-2011-01-01.sql /backup/daily/database1/database1-2011-01-02.sql /backup/daily/database1/database1-2011-01-03.sql /backup/daily/database1/database1-2011-01-04.sql /backup/daily/database1/database1-2011-01-05.sql /backup/daily/database1/database1-2011-01-06.sql /backup/daily/database1/database1-2011-01-07.sql /backup/daily/anotherdb/anotherdb-2011-01-01.sql /backup/daily/anotherdb/anotherdb-2011-01-02.sql /backup/daily/anotherdb/anotherdb-2011-01-03.sql /backup/daily/anotherdb/anotherdb-2011-01-04.sql /backup/daily/anotherdb/anotherdb-2011-01-05.sql /backup/daily/anotherdb/anotherdb-2011-01-06.sql /backup/daily/anotherdb/anotherdb-2011-01-07.sql /backup/daily/stuff/stuff-2011-01-01.sql /backup/daily/stuff/stuff-2011-01-02.sql /backup/daily/stuff/stuff-2011-01-03.sql /backup/daily/stuff/stuff-2011-01-04.sql /backup/daily/stuff/stuff-2011-01-05.sql /backup/daily/stuff/stuff-2011-01-06.sql /backup/daily/stuff/stuff-2011-01-07.sql And there are lots lots more. ultimately I want to import all the 2011-01-07.sql files into my mysql database. This works for one mysql -u root -ppassword < /backup/daily/database1/database1-2011-01-07.sql That will nicely restore that database from this backupfile. I want to run a process where it does this for all databases. So my plan is to first cp all 2011-01-07 sql files into a tmp dir e.g. cp /backup/daily/*/*2011-01-07*.sql /tmp/all The command above unfortunately isn't working I get an error: cp: cannot stat ..... No such file or directory So can you guys help me out with this. For bonus points if you can tell me how to do the next step which is import all databases in one command doing one at a time that would be great too. I really want to do these in two separate steps because I need to delete a few sql files manually from the tmp dir before I run the restore command. So I need: 1) command to copy all 2011-01-07 sql files to a tmp dir 2) command to import all those files in that dir into mysql I know its possible to do in one but for lots of reasons I really would prefer to do it in two steps.

  Read the article

• MySQL partition "full"?

  - by gdea73

  I have a server that runs Debian 6.2, with Apache, PHP5, and MySQL. Well, I hadn't done anything with MySQL at all so far, just Apache and PHP; I must have installed it (mysql-server) at some point along the line, and I decided to login to the database for the first time a couple days ago as I was considering using the database for a future website project. I noticed that the "root" user had a password, and I didn't recall having set one. My usual root password was incorrect. So I attempted to reset the password. sudo service mysql stop (stopped successfully) sudo /usr/bin/mysqld_safe --skip-grant-tables --skip-networking & started successfully, from what I can tell. However, mysql itself returns "Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld,sock' (2)", and additionally sudo service mysql start returns "/etc/init.d/mysql: ERROR: The partition with /var/lib/mysql is too full! ... failed!" df -h tells me that / is 26% used, a 20GB partition, and /home, roughly 900GB, has only 5% usage. On a potentially related note, I've been experiencing random hangs since I noticed this problem, my tty2 randomly froze several times while idle, and the entire system is suddenly unstable. gnome-terminal also does not open. (Gnome-terminal apparently works now, disregard that part, but the server is still being somewhat unstable, I randomly lost connection when I was SSHed into it from my laptop, twice now.)

  Read the article

• Connecting remotely to an SQL server inside a LAN

  - by vondip

  Hello everyone, I am using SQL server 2008 inside my home lan. I've configured it to accept remote connections and I can now connect to the server from other pcs inside the lan. The problems rises when I try connecting to the server from a computer outside of my home lan. I've disabled my router's firewall and I've configured a virtual server on port 1433 forwarding to the correct lan ip. What's wrong? why is it not working? Thank you very much for your help~! Edit: This is the error I keep getting: A network related or instance specific error occured while establishing connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that the SQL SERVER is configued to allow remote connections. (provider : Sql network interfaces, error: 25- Connection string is not valid) OK these are my router's details: edimax br-6204wg I am not sure how I am supposed to browse google.com. can you be a bit more specific?

  Read the article

< Previous Page | 724 725 726 727 728 729 730 731 732 733 734 735  | Next Page >