Search Results

Search found 19157 results on 767 pages for 'shared folder'.

Page 731/767 | < Previous Page | 727 728 729 730 731 732 733 734 735 736 737 738  | Next Page >

  • Some sites won't load on Ubuntu/Mint

    - by Or W
    I have a REALLY weird problem with either my network or my OS. Last week I've suddenly had difficulties loading some websites or even more odd some parts of different websites. For example, I could load gmail.com, login and view the list of emails in my inbox but when I clicked one of them it would just time out. Another example is http://www.ynet.co.il, I can view the home page but going into any one of the articles fails (times out). I've tried Chrome, Firefox and Opera, all fail the same way. If I take a URL of a page I cannot load via the browser and try to wget it though the console I get the file just fine. I've formatted my machine (Used to run Ubuntu 13.04) and installed Mint Linux this time, it worked fine for a few days and now, again, having the same exact issues. Important to note that I have other machines connected either directly or via Wi-Fi to the router and they are all working fine (two win7 machines and 1 raspberry pi). Another strange behavior is that I can ftp or ssh to remote machines but cannot send files via ftp (times out) even if I set passive mode ON and when using ssh I can do just about anything but I cannot paste text into the remote machine, for example if I nano a file on the remote machine and try to paste anything from my clipboard it freezes. What I've tried so far: Disable IPv6 on the networking admin (and on firefox disabling ipv6 on the about:config page) Changing the port and the network cable I went to the store and bought a new standalone PCIe network adapter Connected my win7 laptop using the same cable and router port (sites that were not working on my Mint are working just fine on the win7 machine) Loaded Mint from a livecd, got the same result Tried changing the MTU (was 1500, tried 1492) Some observations: When I clear my browser cache and go to facebook.com for example, the homepage loads but I fail to load any profile/group page. If I refresh facebook.com homepage a couple of times it stops and fails to load until I clear my browser cache. I changed the chrome cache folder permissions to 0777 but that did not help. When I run netstat -n I see A LOT of connections that are in 'FIN_WAIT' mode (I'm guessing that's when I try to refresh pages that are not working and timing out), I have no idea what it means or if it helps anyone figure out what's wrong. The sites that are not loading correctly are always that same, they don't vary or anything and they fail to load exactly the same way on all three browsers that I've tried. When I Googled 'Ubuntu some sites not loading' I see a huge amount of complaints just like mine, but none of them that I could find actually says what the problem is or how they fixed it. Technical stuff: netstat -n ps aux netstat -nr

    Read the article

  • How do I correct a directory incorrectly copied into itself?

    - by Peter Boughton
    Given the following situation... <path>/mydir1/mydir2 ...where mydir2 should have overwritten mydir1, but was instead placed inside, and both directories actually have the same filename. How is that fixed? Attempting to do mv <path>/mydir/mydir/* <path>/mydir/ or mv <path>/mydir <path>/ results in: mv: cannot move `<path>/mydir/mydir` to a subdirectory of itself, `<path>/mydir` This seems stupidly simple, but it's late here and I can't figure it out. There are seventeen such directories to fix (path differs for each, but same mydir name). To confirm, the error message can be caused with this: # cd /path/to/directory # mv mydir/mydir ./ mv: cannot move `mydir/mydir' to a subdirectory of itself, `./mydir' Also tried: # mv mydir/mydir/* mydir/ mv: cannot move `mydir/mydir/otherdir1' to a subdirectory of itself, `mydir/otherdir1' mv: cannot move `mydir/mydir/otherdir2' to a subdirectory of itself, `mydir/otherdir2' and... # mv /path/to/directory/mydir/mydir/otherdir1 /path/to/directory/mydir/ mv: cannot move `/path/to/directory/mydir/mydir/otherdir1' to a subdirectory of itself, `/path/to/directory/mydir/otherdir1' and using a temporary directory: # mv mydir/mydir ./mydir-temp # mv mydir-temp/* mydir/ mv: cannot move `mydir-temp/otherdir1' to a subdirectory of itself, `mydir/otherdir1' mv: cannot move `mydir-temp/otherdir2' to a subdirectory of itself, `mydir/otherdir2' I found a similar question "How to recursively move all files (including hidden) in a subfolder into a parent folder in *nix?" which suggested that mv bar/{,.}* . would do this. But this also gives the same errors, as well as confusingly picking up . and .. from somewhere. # cd mydir # mv mydir/{,.}* . mv: cannot move `mydir/otherdir1' to a subdirectory of itself, `./otherdir1' mv: cannot move `mydir/otherdir2' to a subdirectory of itself, `./otherdir2' mv: cannot move `mydir/.' to `./.': Device or resource busy mv: cannot move `mydir/..' to `./..': Device or resource busy mv: overwrite `./.file'? y Another similar question "linux mv command weirdness" suggests that mv doesn't overwrite and a copy is required. # cd mydir # cp -rf ./mydir/* ./ cp: overwrite `./otherdir1/file1'? y cp: overwrite `./otherdir1/file2'? y cp: overwrite `./otherdir1/file3'? This appears to be working... except there's a lot of files (and dirs) - I don't want to confirm every one! Isn't the f there supposed to prevent this? Ok, so cp was aliased to cp -i (which I found out with type cp), and bypassed by using \cp -rf ./mydir/* ./ which seems to have worked. Although I've solved the problem of getting dirs/files from one place to another, I'm still curious as to what's going on with the mv stuff - is this really a deliberate feature as suggested by Warner?

    Read the article

  • Apache ProxyPass Missing Images

    - by EpicOfChaos
    I have a apache server that sits in front of my glassfish server. mydomain.com goes directly to my static files on apache, than if you hit the subdomain forum.mydomain.com it goes to the glassfish webapp forum/ at 127.0.0.1:8080/forum/. This proxy seems to work it takes me to the web app but all of the images are missing! Here is how I go my virtual host setup. NameVirtualHost *:80 <VirtualHost *:80> ServerName www.mydomain.com ServerAlias subdomain.mydomain.com mydomain.com DocumentRoot "/usr/local/apache/htdocs" </VirtualHost> <VirtualHost *:80> ServerName forum.mydomain.com # any logging config, etc, that you need ProxyPass / http://127.0.0.1:8080/forum/ ProxyPassReverse / http://127.0.0.1:8080/forum/ </VirtualHost> And in the access log this is what I am seeing. [15/Jan/2012:03:28:02 +0000] "GET /forums/list.page HTTP/1.1" 200 12861 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/logo.jpg HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/styles/style.css?1326582403934 HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/icon_mini_recentTopics.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/icon_mini_search.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/icon_mini_members.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/styles/en_US.css?1326582403934 HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/icon_mini_groups.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/folder_big.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/icon_mini_login.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/whosonline.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/icon_mini_register.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/ping_session.jsp HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/folder_lock.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/folder.gif HTTP/1.1" 404 1075 [15/Jan/2012:03:28:02 +0000] "GET /forum/templates/default/images/folder_new.gif HTTP/1.1" 404 1075 Any Ideas why the images are not working?

    Read the article

  • Setting up nginx as proxy to apache; All good, but nginx doesn't serve media

    - by becomingGuru
    I have set it up such that nginx proxies request and sends django requests to apache and serves media itself. Following documents my setup: Nginx Configuration: /etc/nginx/nginx.conf user www-data; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; access_log /var/log/nginx/access.log; sendfile on; tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; include /etc/nginx/sites-enabled/*; } ===== ngnix proxy /etc/nginx/proxy.conf ============ proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 10m; client_body_buffer_size 128k; proxy_connect_timeout 90; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; =========== Nginx server file: /etc/nginx/sites-enabled/some-name.txt ========== server { listen 208.109.252.110:80; server_name netconf; autoindex on; access_log /home/site/server_logs/nginx_access.log; error_log /home/site/server_logs/nginx_error.log; location / { proxy_pass http://127.0.0.1:80/; include /etc/nginx/proxy.conf; } location /site_media/ { root /home/site/folder/static; } } ========== Nginx very well proxies the request and passes to apache, the required requests, but doesn't serve the media. In the last server file, location site_media is not served, at all. :( Everything seems perfect to me. What is wrong? Thanks in advance.

    Read the article

  • grep simply fails when used on a few files

    - by Reid
    I've been trying for about the past 30 minutes to get this to work properly. grep is not exactly the most difficult thing to use, so I'm somewhat baffled as to why this won't work. The files I'm trying to use grep on are simple XHTML log files. Their names are in the format [email protected], though I don't think that should matter, and inside is simple XHTML. I copied one such log file to be testfile so you can see the output of some commands and why it's baffling to me: [~/.chatlogs_windows/dec] > whoami reid [~/.chatlogs_windows/dec] > type grep grep is /bin/grep [~/.chatlogs_windows/dec] > uname -a Linux reid-pc 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 x86_64 GNU/Linux [~/.chatlogs_windows/dec] > head -1 /etc/issue Linux Mint 10 Julia [~/.chatlogs_windows/dec] > ls -Alh | grep testfile -rw-r--r-- 1 reid reid 63K 2011-01-10 12:45 testfile [~/.chatlogs_windows/dec] > tail -3 testfile </body> </html> [~/.chatlogs_windows/dec] > file testfile testfile: XML document text [~/.chatlogs_windows/dec] > grep html testfile [~/.chatlogs_windows/dec] > grep body testfile [~/.chatlogs_windows/dec] > grep "</html>" testfile [~/.chatlogs_windows/dec] > grep "</body>" testfile [~/.chatlogs_windows/dec] > cat testfile | grep html [~/.chatlogs_windows/dec] > cat testfile | wc -l 231 [~/.chatlogs_windows/dec] > cat testfile | tail -3 </body> </html> [~/.chatlogs_windows/dec] > chmod a+rw testfile && ls -Alh | grep testfile -rw-rw-rw- 1 reid reid 63K 2011-01-10 12:45 testfile [~/.chatlogs_windows/dec] > grep html testfile That's what I'm attempting to do. I want to just use grep -ri query . in ~/.chatlogs_windows, which normally works perfectly for me... but for some reason, it completely fails at going through these files. If it matters, I copied these files off of my Windows 7 partition. But I chown'd them and gave myself all the appropriate permissions, and other programs (like cat) seem to read them just fine. I also copied testfile to testfile_unix and converted the line endings and tried that, but it didn't work either. I'm using zsh, but I tried it on bash and that failed too. Also, grep works normally: I tried it out on my documents folder and it worked flawlessly. If you need any more information, just let me know. I tried googling around, but I found no reason for grep to simply not work. Thanks in advance.

    Read the article

  • Apache2 & .htaccess : Apache ignoring AccessFile

    - by Elyx0
    Hi there here is my server configuration: DEBIAN 32Bits / PHP 5 / Apache Server version: Apache/2.2.3 - Server built: Mar 22 2008 09:29:10 The AccessFiles : grep -ni AccessFileName * apache2.conf:134:AccessFileName .htaccess apache2.conf:667:AccessFileName .httpdoverride All the AllowOverride statements in my apache2/ folder. mods-available/userdir.conf:6: AllowOverride Indexes AuthConfig Limit mods-available/userdir.conf:16: AllowOverride FileInfo AuthConfig Limit mods-enabled/userdir.conf:6: AllowOverride Indexes AuthConfig Limit mods-enabled/userdir.conf:16: AllowOverride FileInfo AuthConfig Limit sites-enabled/default:8: AllowOverride All sites-enabled/default:14: AllowOverride All sites-enabled/default:19: AllowOverride All sites-enabled/default:24: AllowOverride All sites-enabled/default:42: AllowOverride All The sites-enabled/default file : 1 <VirtualHost *> 2 ServerAdmin [email protected] 3 ServerName mysite.com 4 ServerAlias mysite.com 5 DocumentRoot /var/www/mysite.com/ 6 <Directory /> 7 Options FollowSymLinks 8 AllowOverride All 9 Order Deny,Allow 10 Deny from all 11 </Directory> 12 <Directory /var/www/mysite.com/> 13 Options Indexes FollowSymLinks MultiViews 14 AllowOverride All 15 Order allow,deny 16 allow from all 17 </Directory> 18 <Directory /var/www/mysite.com/test/> 19 AllowOverride All 20 </Directory> 21 22 ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ 23 <Directory "/usr/lib/cgi-bin"> 24 AllowOverride All 25 Options ExecCGI -MultiViews +SymLinksIfOwnerMatch 26 Order allow,deny 27 Allow from all 28 </Directory> 29 30 ErrorLog /var/log/apache2/error.log 31 32 # Possible values include: debug, info, notice, warn, error, crit, 33 # alert, emerg. 34 LogLevel warn 35 36 CustomLog /var/log/apache2/access.log combined 37 ServerSignature Off 38 39 Alias /doc/ "/usr/share/doc/" 40 <Directory "/usr/share/doc/"> 41 Options Indexes MultiViews FollowSymLinks 42 AllowOverride All 43 Order deny,allow 44 Deny from all 45 Allow from 127.0.0.0/255.0.0.0 ::1/128 46 </Directory> 47 48 49 50 51 52 53 54 </VirtualHost> If i change any Allow from all in Deny from all , it works whenever i put it. I've got one .htaccess at /mysite.com/.htaccess & one at /mysite.com/test/.htaccess with: Order Deny,Allow Deny from all Neither of them work i can still see my website. I've got mod_rewrite enabled but i don't think it does anything here. I've tried almost everything :/ It works on my local environnement (MAMP) but fails when on my Debian server.

    Read the article

  • recommendations for efficient offsite remote backup solution of vm's

    - by senorsmile
    I am looking for recommendations for backing up my current 6 vm's(and soon to grow to up to 20). Currently I am running a two node proxmox cluster(which is a debian base using kvm for virtualization with a custom web front end to administer). I have two nearly identical boxes with amd phenom II x4's and asus motherboards. Each has 4 500 GB sata2 hdd's, 1 for the os and other data for the proxmox install, and 3 using mdadm+drbd+lvm to share the 1.5 TB's of storage between the two machines. I mount lvm images to kvm for all of the virtual machines. I currently have the ability to do live transfer from one machine to the other, typically within seconds(it takes about 2 minutes on the largest vm running win2008 with m$ sql server). I am using proxmox's built-in vzdump utility to take snapshots of the vm's and store those on an external harddrive on the network. I then have jungledisk service (using rackspace) to sync the vzdump folder for remote offsite backup. This is all fine and dandy, but it's not very scalable. For one, the backups themselves can take up to a few hours every night. With jungledisk's block level incremental transfers, the sync only transfers a small portion of the data offsite, but that still takes at least a half an hour. The much better solution would of course be something that allows me to instantly take the difference of two time points (say what was written from 6am to 7am), zip it, then send that difference file to the backup server which would instantly transfer to the remote storage on rackspace. I have looked a little into zfs and it's ability to do send/receive. That coupled with a pipe of the data in bzip or something would seem perfect. However, it seems that implementing a nexenta server with zfs would essentially require at least one or two more dedicated storage servers to serve iSCSI block volumes (via zvol's???) to the proxmox servers. I would prefer to keep the setup as minimal as possible (i.e. NOT having separate storage servers) if at all possible. I have also briefly read about zumastor. It looks like it could also do what I want, but it appears to have halted development in 2008. So, zfs, zumastor or other?

    Read the article

  • How to upgrade a 1.4.3 TortoiseSVN-created repository to 1.6.x?

    - by SiegeX
    A few years ago, TortoiseSVN 1.4.3 was deployed to our software development team and we are now looking at upgrading the client to the latest 1.6.x version. I had hoped this upgrade would be transparent with the additional features and modifications being client-side. For the most part, this was true except for a very important feature -- merging. When I try to merge a feature branch back into truck I get a show-stopping "Merge tracking not supported error." Here are some facts worth noting: When the repo was first created (before I was on board), it was created via the TortoiseSVN client itself. We do not have a 'svn server daemon' per se, rather the repository folders/database resides on a share folder that is accessible from our workstation machines via file:///. This was actually an eye opener for me, I had always thought there was some SVN server daemon we were talking to. We do not have any access to the underlying machine hosting the SVN share other than the ability to read/write to the share itself. I don't even know what OS the machine is running on. This share server was chosen because its drives are backed up nightly by our IT group. In all honesty, we really don't need the merge tracking feature although it would be nice to have. For the time being it would be sufficient to be able to use a 1.6.x TortoiseSVN client on the 1.4.3 repository and have it merge (sans tracking) without error. So now the question becomes, how does one upgrade a client-created 1.4.3 repo to a 1.6.x compatible version without access to the underlying machine the repo resides on? I was hoping the TortoiseSVN client itself had the ability to do this but that does not appear to be the case. Will I be forced to copy the entire repo over to my local drive, run some svn commands to upgrade the repo locally then copy the repo back to the share point? If so, will doing this break any compatibility with the the 1.4.3 clients in case we cant upgrade them all at the same time? Thanks for the help.

    Read the article

  • How to upgrade a 1.4.3 TortoiseSVN-created repository to 1.6.x?

    - by SiegeX
    A few years ago, TortoiseSVN 1.4.3 was deployed to our software development team and we are now looking at upgrading the client to the latest 1.6.x version. I had hoped this upgrade would be transparent with the additional features and modifications being client-side. For the most part, this was true except for a very important feature -- merging. When I try to merge a feature branch back into truck I get a show-stopping "Merge tracking not supported error." Here are some facts worth noting: When the repo was first created (before I was on board), it was created via the TortoiseSVN client itself. We do not have a 'svn server daemon' per se, rather the repository folders/database resides on a share folder that is accessible from our workstation machines via file:///. This was actually an eye opener for me, I had always thought there was some SVN server daemon we were talking to. We do not have any access to the underlying machine hosting the SVN share other than the ability to read/write to the share itself. I don't even know what OS the machine is running on. This share server was chosen because its drives are backed up nightly by our IT group. In all honesty, we really don't need the merge tracking feature although it would be nice to have. For the time being it would be sufficient to be able to use a 1.6.x TortoiseSVN client on the 1.4.3 repository and have it merge (sans tracking) without error. So now the question becomes, how does one upgrade a client-created 1.4.3 repo to a 1.6.x compatible version without access to the underlying machine the repo resides on? I was hoping the TortoiseSVN client itself had the ability to do this but that does not appear to be the case. Will I be forced to copy the entire repo over to my local drive, run some svn commands to upgrade the repo locally then copy the repo back to the share point? If so, will doing this break any compatibility with the the 1.4.3 clients in case we cant upgrade them all at the same time? Thanks for the help.

    Read the article

  • Apache Alias subfolder and starting with dot

    - by MauricioOtta
    I have a multi purpose server running ArchLinux that currently serves multiple virtual hosts from /var/www/domains/EXAMPLE.COM/html /var/www/domains/EXAMPLE2.COM/html I deploy those websites (mostly using Kohana framework) using a Jenkins job by checking out the project, removes the .git folder and ssh-copy the tar.gz to /var/www/domains/ on the server and untars it. Since I don't want to have to re-install phpMyAdmin after each deploy, I decided to use an alias. I would like the alias to be something like /.tools/phpMyAdmin/ so I could have more "tools" later if I wanted to. I have tried just changing the default httpd-phpmyadmin.conf that was installed by following the official WIKI: https://wiki.archlinux.org/index.php/Phpmyadmin Alias /.tools/phpMyAdmin/ "/usr/share/webapps/phpMyAdmin" <Directory "/usr/share/webapps/phpMyAdmin"> AllowOverride All Options FollowSymlinks Order allow,deny Allow from all php_admin_value open_basedir "/var/www/:/tmp/:/usr/share/webapps/:/etc/webapps:/usr/share/pear/" </Directory> Changing only that, doesn't seem to work with my current setup on the server, and apache forwards the request to the framework which 404s (as there's no route to handle /.tools/phpAdmin). I have Mass Virtual hosting enable and setup like this: # # Use name-based virtual hosting. # NameVirtualHost *:8000 # get the server name from the Host: header UseCanonicalName On # splittable logs LogFormat "%{Host}i %h %l %u %t \"%r\" %s %b" vcommon CustomLog logs/access_log vcommon <Directory /var/www/domains> # ExecCGI is needed here because we can't force # CGI execution in the way that ScriptAlias does Options FollowSymLinks ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> RewriteEngine On # a ServerName derived from a Host: header may be any case at all RewriteMap lowercase int:tolower ## deal with normal documents first: # allow Alias /icons/ to work - repeat for other aliases RewriteCond %{REQUEST_URI} !^/icons/ # allow CGIs to work RewriteCond %{REQUEST_URI} !^/cgi-bin/ # do the magic RewriteCond %{SERVER_NAME} ^(www\.|)(.*) RewriteRule ^/(.*)$ /var/www/domains/${lowercase:%2}/html/$1 ## and now deal with CGIs - we have to force a MIME type RewriteCond %{REQUEST_URI} ^/cgi-bin/ RewriteRule ^/(.*)$ /var/www/domains/${lowercase:%{SERVER_NAME}}/cgi-bin/$1 [T=application/x-httpd-cgi] There is also nginx running on this server on port 80 as a reverse proxy for Apache: location ~ \.php$ { proxy_pass http://127.0.0.1:8000; } Everything else was setup by following the official WIKI so I don't think those would cause trouble. Do I need to have the alias for phpMyAdmin setup along the mass virtual hosting or can it be in a separate include file for that alias to work?

    Read the article

  • ssh refuses to authenticate keys

    - by MixturaDementiae
    So I am setting up a connection between my machine [fedora 17] and a virtual machine running in Virtual Box in which is running CentOS 5. I have installed openssh from the repositories on CentOS, and I have configured everything as it follows: Protocol 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key SyslogFacility AUTHPRIV PermitRootLogin yes RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile /home/pigreco/.ssh/authorized_keys PasswordAuthentication no ChallengeResponseAuthentication yes GSSAPIAuthentication yes GSSAPICleanupCredentials yes UsePAM yes AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE AcceptEnv XMODIFIERS X11Forwarding yes Subsystem sftp /usr/libexec/openssh/sftp-server this is the configuration file sshd_config on the server i.e. on the CentOS. Moreover I have created a public/private key pair as usual on the .ssh/ folder in my home directory in my OS, i.e. Fedora, and then I've copied with scp the id_rsa.pub to the server and then I have appended its content to the file .ssh/authorized_keys on the server machine. The error that I get is the following: OpenSSH_5.9p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 50: Applying options for * debug1: Connecting to 192.168.100.13 [192.168.100.13] port 22. debug1: Connection established. debug1: identity file /home/mayhem/.ssh/identity type -1 debug1: identity file /home/mayhem/.ssh/identity-cert type -1 debug1: identity file /home/mayhem/.ssh/id_rsa type 1 debug1: identity file /home/mayhem/.ssh/id_rsa-cert type -1 debug1: identity file /home/mayhem/.ssh/id_dsa type -1 debug1: identity file /home/mayhem/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 16:e5:72:d1:37:94:1b:5e:3d:3a:e5:da:6f:df:0c:08 debug1: Host '192.168.100.13' is known and matches the RSA host key. debug1: Found key in /home/mayhem/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Cannot determine realm for numeric host address debug1: Unspecified GSS failure. Minor code may provide more information Cannot determine realm for numeric host address debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information Cannot determine realm for numeric host address debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/mayhem/.ssh/id_rsa debug1: Server accepts key: pkalg ssh-rsa blen 279 Agent admitted failure to sign using the key. debug1: Trying private key: /home/mayhem/.ssh/identity debug1: Trying private key: /home/mayhem/.ssh/id_dsa debug1: Next authentication method: keyboard-interactive Do you have some good suggestion of what I can do? thank you

    Read the article

  • Windows 2003 GPO Software Restrictions

    - by joeqwerty
    We're running a Terminal Server farm in a Windows 2003 Domain, and I found a problem with the Software Restrictions GPO settings that are being applied to our TS servers. Here are the details of our configuration and the problem: All of our servers (Domain Controllers and Terminal Servers) are running Windows Server 2003 SP2 and both the domain and forest are at Windows 2003 level. Our TS servers are in an OU where we have specific GPO's linked and have inheritance blocked, so only the TS specific GPO's are applied to these TS servers. Our users are all remote and do not have workstations joined to our domain, so we don't use loopback policy processing. We take a "whitelist" approach to allowing users to run applications, so only applications that we approve and add as path or hash rules are able to run. We have the Security Level in Software Restrictions set to Disallowed and Enforcement is set to "All software files except libraries". What I've found is that if I give a user a shortcut to an application, they're able to launch the application even if it's not in the Additional Rules list of "whitelisted" applications. If I give a user a copy of the main executable for the application and they attempt to launch it, they get the expected "this program has been restricted..." message. It appears that the Software Restrictions are indeed working, except for when the user launches an application using a shortcut as opposed to launching the application from the main executable itself, which seems to contradict the purpose of using Software Restrictions. My questions are: Has anyone else seen this behavior? Can anyone else reproduce this behavior? Am I missing something in my understanding of Software Restrictions? Is it likely that I have something misconfigured in Software Restrictions? EDIT To clarify the problem a little bit: No higher level GPO's are being enforced. Running gpresults shows that in fact, only the TS level GPO's are being applied and I can indeed see my Software Restictions being applied. No path wildcards are in use. I'm testing with an application that is at "C:\Program Files\Application\executable.exe" and the application executable is not in any path or hash rule. If the user launches the main application executable directly from the application's folder, the Software Restrictions are enforced. If I give the user a shortcut that points to the application executable at "C:\Program Files\Application\executable.exe" then they are able to launch the program. EDIT Also, LNK files are listed in the Designated File Types, so they should be treated as executable, which should mean that they are bound by the same Software Restrictions settings and rules.

    Read the article

  • HDD from Mid-2009 MacBook Pro works OUTSIDE laptop, but not INSIDE.

    - by Jaime
    Leading up to the problem: I was working late one night on a Keynote presentation. My battery ran out, and the computer did that hibernation thing it does when there's no battery power. I got my charger, connected it to my computer, and then pushed the power button. It started up for a second in to the gray screen it usually goes to. Then I turned around, tugging the magsafe charger out of the connector on the computer. This caused my computer to shut down again. Now I can't get it to boot at all -- just a blinking folder icon with a question mark in it on boot up. I've tried pretty much everything to deal with this. Multiple forced reboots, resetting PRAM and NVRAM, etc. I booted to original OSX disc and ran disc utility, but I discovered that there is no disc to boot to. I ran the Apple Hardware Test, and it came back 100% good. I booted to an Ubuntu live-boot disc and ran that disc utility, just to see if it recognized a disc at all. It didn't. So I removed the HDD, and replaced it with a bootable volume running BSD. It didn't recognize that HDD either. I then attached my HDD to my computer via an external enclosure with a USB interface. Lo and behold, it booted! So my computer now only work with my HDD attached externally. This means that the HDD is functional. And the AHT returns no hardware malfunctions. So what the hell is going on? … In the meantime: I've put the HDD back into the computer but it still doesn't do anything at all (I'm running it externally right now). I just checked the serial number and my 1 year warranty expired recently, so I can't send it back for repair. … Little Help Thoughts? I've been searching everywhere for leads, but no luck. …

    Read the article

  • Why many applications close after opening a document or doing a specific actions?

    - by Mohsen Farjami
    I have some encrypted pdf files that have no problem and in my last windows, I could open them easily with Adobe Reader 9.2 and other pdf readers. But now, I can only open non-encrypted pdf files and one encrypted file with Adobe Reader. every time I open almost any encrypted pdf, it closes itself. Also, when I try to search a folder for a keyword with Foxit Reader, once it closed. This is not related to Adobe Reader, because I have the same problem with Word 2007. When I open a document, sometimes it closes instantly and sometimes it closes after a few seconds and sometimes it is stable. My windows is Fresh. I have installed it a few days ago. I have ESET Smart Security 5.2 and I have updated it today. OS: XP Pro SP3, RAM: 3 GB, CPU: 2 GHZ, HDD: 320 GB My installed applications: Adobe AIR Adobe Flash Player 11 ActiveX Adobe Flash Player 11 Plugin Adobe Photoshop CS4 Adobe Reader 9.2 Atheros Wireless LAN Client Adapter Babylon Bluetooth Stack for Windows by Toshiba CCleaner Conexant HD Audio Dell Touchpad ESET Smart Security Farsi (101) Custom Foxit Reader Framing Studio 3.27 Google Chrome Hard Disk Sentinel PRO HDAUDIO Soft Data Fax Modem with SmartCP Intel(R) Graphics Media Accelerator Driver IrfanView (remove only) Java(TM) 6 Update 18 K-Lite Mega Codec Pack 8.8.0 Microsoft .NET Framework 2.0 Service Pack 1 Microsoft .NET Framework 3.0 Service Pack 1 Microsoft .NET Framework 3.5 Microsoft Data Access Components KB870669 Microsoft Office 2007 Primary Interop Assemblies Microsoft Office Enterprise 2007 Microsoft User-Mode Driver Framework Feature Pack 1.0.0 (Pre-Release 5348) Mozilla Firefox 7.0.1 (x86 en-US) Notepad++ Office Tab FreeEdition 8.50 ParsQuran PerfectDisk 12 Professional Registry First Aid RICOH R5C83x/84x Flash Media Controller Driver Ver.3.54.06 Sahar Money Manager 2.5 Stickies 7.1d The KMPlayer (remove only) TurboLaunch 5.1.2 Unlocker 1.9.1 USB Safely Remove 4.2 Virastyar Visual Studio 2005 Tools for Office Second Edition Runtime Winamp Windows Internet Explorer 8 Windows Media Player 11.0.5358.4826 Windows XP Service Pack 3 WinRAR 4.11 (32-bit) WorkPause 1.2 Z Dictionary My startup applications: WorkPause USB Safely Remove TurboLaunch SunJavaUpdateSched Stickies rfagent Persistence ParsQuran Daily Verse ITSecMng IgfxTray HotKeysCmds Hard Disk Sentinel egui disable shift+delete CTFMON.EXE Bluetooth Manager Babylon Client Apoint AdobeCS4ServiceManager Adobe Reader Speed Launcher Adobe ARM What should I do to solve it? If you recommend installing Windows again, what guarantees that it won't happen again?

    Read the article

  • Apache refusing to change DocumentRoot

    - by mingos
    I've installed Zend Server CE 5.1.0 on Windows 7 Ultimate 64 bit in its default location, meaning the path to my htdocs is C:\Program Files (x86)\Zend\Apache2\htdocs. Not something that I would like to type each time I check out a project from SVN in Eclipse or something. I'd like to set the DocumentRoot to a different folder, namely D:\www. What I've done I edited conf/httpd.conf, with the significant lines being: DocumentRoot "D:\www" <Directory "D:\www"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> Include conf/extra/httpd-vhosts.conf I edited conf/extra/httpd-vhosts.conf to add a virtual host: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot D:\www ServerName localhost ServerAlias localhost SetEnv APPLICATION_ENV development SetEnv APPLICATION_DOMAIN localhost </VirtualHost> <VirtualHost *:80> DocumentRoot D:\www\UmbraCMS ServerName umbracms.local ServerAlias umbracms.local SetEnv APPLICATION_ENV development SetEnv APPLICATION_DOMAIN umbracms.local </VirtualHost> I edited C:\Windows\System32\drivers\etc\hosts to add this line: 127.0.0.1 umbracms.local And I also added a PHP project to D:\www\UmbraCMS. And restarted Apache. Actually, I restarted the computer, too, just in case. What's supposed to happen After typing http://umbracms.local/ in the browser's address bar, I want to see my PHP project launch, obviously. What's actually happening No matter whether whether I type http://umbracms.local/ or http://localhost/, I'm taken to the test zend page, located in C:\Program Files (x86)\Zend\Apache2\htdocs\index.html, as if neither DocumentRoot was changed nor name-based virtual hosting worked. Interestingly, when I put another project in C:\Program Files (x86)\Zend\Apache2\htdocs\bugraid\ and then, in the browser, typed http://localhost/bugraid, the project actually opened, or at least tried to, as it completely ignored the project's .htaccess file. Extra considerations Zend Server's Apache version is 2.2.16, PHP version is 5.3.0 I've installed MySQL CE 5.5.13 separately, and it works, both from command line and via MySQL Workbench. I have XAMPP installed, but none of its components are started up. It's got its own install of Apache 2.2.17 and MySQL 5.5.1. PHP version is 5.3.5 (I think). Question Have you had a similar situation before? What else might need taking care of in order to have Zend Server's Apache use D:\www as document root for my PHP projects?

    Read the article

  • Problem deploying GWT application on apache and tomcat using mod_jk

    - by Colin
    I'm trying to deploy a GWT app on Apache using mod_jk connector. I have compiled the application and tested it on tomcat on the address localhost:8080/loginapp and it works ok. However when I deploy it to apache using mod_jk I get the starter page which gives me a login form but trying to login I get this error 404 Not Found Not Found The requested URL /loginapp/loginapp/login was not found on this server Looking at the apache log files i see this [Thu Jan 13 13:43:17 2011] [error] [client 127.0.0.1] client denied by server configuration: /usr/local/tomcat/webapps/loginapp/WEB-INF/ [Thu Jan 13 13:43:26 2011] [error] [client 127.0.0.1] File does not exist: /usr/local/tomcat/webapps/loginapp/loginapp/login, referer: http://localhost/loginapp/LoginApp.html The mod_jk configurations on my apache2.conf file are as follows LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so JkWorkersFile /etc/apache2/workers.properties JkLogFile /var/log/apache2/mod_jk.log JkLogLevel info JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " JkOptions +ForwardKeySize +ForwardURICompat -ForwardDirectories JkRequestLogFormat "%w %V %T" <IfModule mod_jk.c> Alias /loginapp "/usr/local/tomcat/webapps/loginapp/" <Directory "/usr/local/tomcat/webapps/loginapp/"> Options Indexes +FollowSymLinks AllowOverride None Allow from all </Directory> <Location /*/WEB-INF/*> AllowOverride None deny from all </Location> JkMount /loginapp/*.html loginapp My workers.properties file is as follows workers.tomcat_home=/usr/local/tomcat workers.java_home=/usr/lib/jvm/java-6-sun ps=/ worker.list=loginapp worker.loginapp.type=ajp13 worker.loginapp.host=localhost worker.loginapp.port=8009 worker.loginapp.cachesize=10 worker.loginapp.cache_timeout=600 worker.loginapp.socket_keepalive=1 worker.loginapp.recycle_timeout=300 worker.loginapp.lbfactor=1 And this is my servlet mappings for my app on the application's web.xml <servlet> <servlet-name>loginServlet</servlet-name> <servlet-class>com.example.loginapp.server.LoginServiceImpl</servlet-class> </servlet> <servlet-mapping> <servlet-name>loginServlet</servlet-name> <url-pattern>/loginapp/login</url-pattern> </servlet-mapping> <servlet> <servlet-name>myAppServlet</servlet-name> <servlet-class>com.example.loginapp.server.MyAppServiceImpl</servlet-class> </servlet> <servlet-mapping> <servlet-name>myAppServlet</servlet-name> <url-pattern>/loginapp/mapdata</url-pattern> </servlet-mapping> Ive tried everything and it seems to still elude me. Even tried changing the deny from all directive on the WEBINF folder to allow from all and still it doesnt work. Maybe im missing something. Any help will be highly appreciated.

    Read the article

  • Postfix to deliver mail to a virtual address mailbox

    - by Chloe
    Postfix version 2.6.6, Dovecot Version 2.0.9 I want to setup Postfix + Dovecot. Dovecot seems to be working. I can authenticate. However, the mailbox is empty! Nothing will get delivered! I followed many tutorials on Postfix + Dovecot but they seem to want to complicate things by using Dovecot LDA or MySQL. I just want it to be very simple and having Postfix deliver to the virtual mail boxes are fine. I don't need MySQL either. I already set up a custom password file that Dovecot uses for authentication and I can login to POP3 with SSL. I can see from the logs that Postfix is delivering to the system user accounts (the catch-all), instead of the virtual users that I set up in Dovecot. The SMTP + SSL authentication seems to work also. I can also see from the logs that Dovecot is checking the correct virtual mail folder. I just need to figure out how to get Postfix to deliver to the virtual mail boxes. I have the following which I believe are relevant. Let me know what other settings you need to see: alias_maps = hash:/etc/aliases mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = xxx.com myhostname = mail.xxx.com mynetworks = 99.99.99.99, 99.99.99.99 myorigin = $mydomain relay_domains = $mydestination, xxx.com, domain2.net, domain3.com sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = reject_non_fqdn_sender reject_non_fqdn_recipient reject_unknown_recipient_domain permit_sasl_authenticated check_relay_domains smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot smtpd_sender_restrictions = check_sender_mx_access cidr:/etc/postfix/bogus_mx reject_invalid_hostname reject_unknown_sender_domain reject_non_fqdn_sender virtual_mailbox_base = /var/spool/vmail virtual_mailbox_domains = xxx.com, domain2.net, domain3.com virtual_minimum_uid = 444 Postfix master.cf: submission inet n - - - - smtpd -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_sasl_type=dovecot -o smtpd_sasl_path=private/auth -o smtpd_sasl_security_options=noanonymous -o smtpd_sasl_local_domain=$myhostname -o smtpd_client_restrictions=permit_sasl_authenticated,reject -o smtpd_sender_login_maps=hash:/etc/postfix/virtual -o smtpd_sender_restrictions=reject_sender_login_mismatch -o smtpd_recipient_restrictions=reject_non_fqdn_recipient,reject_unknown_recipient_domain,permit_sasl_authenticated,reject Dovecot related: mail_location = maildir:~/Maildir passdb { args = /etc/dovecot/users.conf driver = passwd-file } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0660 user = postfix } } The virtual mail user: vmail:x:444:99:virtual mail users:/var/spool/vmail:/sbin/nologin Here is the /var/log/maillog when I try to send something to myself: Oct 25 22:10:05 308321 postfix/smtpd[2200]: connect from user-999.cable.mindspring.com[99.99.99.99] Oct 25 22:10:05 308321 postfix/smtpd[2200]: D224BD4753: client=user-999.cable.mindspring.com[99.99.99.99], sasl_method=LOGIN, [email protected] Oct 25 22:10:06 308321 postfix/cleanup[2207]: D224BD4753: message-id=<7DC3C163CFFC483AB6226F8D3D9969D2@dumbopc> Oct 25 22:10:06 308321 postfix/qmgr[2168]: D224BD4753: from=<[email protected]>, size=1385, nrcpt=1 (queue active) Oct 25 22:10:06 308321 postfix/smtpd[2200]: disconnect from user-999.cable.mindspring.com[99.99.99.99] Oct 25 22:10:06 308321 postfix/local[2208]: D224BD4753: to=<[email protected]>, orig_to=<[email protected]>, relay=local, delay=1.1, delays=0.53/0.02/0/0.51, dsn=2.0.0, status=sent (delivered to mailbox) Oct 25 22:10:06 308321 postfix/qmgr[2168]: D224BD4753: removed

    Read the article

  • Windows Service Limit Crashes Services on Startup

    - by Paul Williams
    We have developed a custom Windows service in C# as part of a large Enterprise application. Our QA department tests multiple versions of this service. The QA lab has several (over 20) copies of this service installed on one Windows 2003 test box. Each copy is in its own folder and has a unique service name, though each executable file is named the same (OurWindowsService.exe, for example). Each service uses the same Windows credentials (a domain user). The purpose of this service is to handle MSMQ messages. The queued messages do all sorts of important stuff. For some reason, they can run only 5 of these services at a time. When we start a 6th, the service crashes on startup. For example, I can start #1, #2, #3, #4, and #5. When I start #6, it crashes. However, if I stop #1 and start #6, #6 runs fine, and now #1 fails to start. When the services crash, the following error appears in the Windows event log: Faulting application OurWindowsService.exe, version 5.40.1.1, faulting module kernel32.dll, version 5.2.3790.4480, fault address 0x0000bef7. I was able to use WinDbg to generate a postmortem dump file. The dump file revealed that the crash occurs trying to delay load SHLWAPI.dll: 0:000> kb100 ChildEBP RetAddr Args to Child 0012ece4 79037966 c06d007e 00000000 00000001 KERNEL32!RaiseException+0x53 0012ed4c 790099ba 00000008 0012ed08 7c82860c mscoree!__delayLoadHelper2+0x139 0012ed98 790075b1 001550c8 0012edac 0012fb34 mscoree!_tailMerge_**SHLWAPI_dll**+0xd 0012edb0 79007623 001550c8 0012edf8 0012edf4 mscoree!XMLGetVersionWithSupported+0x22 0012ee00 790069a4 aa06f1b0 00000000 000001fe mscoree!RuntimeRequest::GetRuntimeVersion+0x56 0012f478 790077aa 00000001 7903fb4c 0012fb34 mscoree!RuntimeRequest::ComputeVersionString+0x5bd 0012f89c 79007802 00000001 0012f8b4 7903fb4c mscoree!RuntimeRequest::FindVersionedRuntime+0x11c 0012f8b8 79007b19 00000001 00000000 aa06fa6c mscoree!RuntimeRequest::RequestRuntimeDll+0x2c 0012ffa4 79007c02 00000001 0012ffbc 00000000 mscoree!GetInstallation+0x72 0012ffc0 77e6f23b 00000000 00000000 7ffdf000 mscoree!_CorExeMain+0x12 0012fff0 00000000 79007bf0 00000000 78746341 KERNEL32!BaseProcessStart+0x23 I believe the error code handed to Kernel32.RaiseException, c06d007e, means Module Not Found, but I'm not certain. Does this sound familiar to anyone? Are we hitting some limit on the number of service instances on some file name? Does MSMQ dislike more than 5 listening services?

    Read the article

  • Active Directory Corrupted In Windows Small Business Server 2011 - Server No Longer Domain Controller

    - by ThinkerIV
    I have a rather bad problem with my Windows SBS 2011. First of all, I'll give the background to what caused the problem. I was setting up a new small business server network. I had my job about finished. The server was working great, all the workstations had joined the domain, and I had all my applications and data moved to the server. I thought I was done. But then it happened. I tried adding one more computer to the domain, and to my dismay the computer name was set to the same name as the server. Apparently when a computer joins a domain with the same name as another machine that is already on the domain, it overrides the first one. For normal workstations, this is not a big deal, you just delete the computer from AD and rejoin the original computer to the domain. However, for a server that is the domain controller it is a whole different story. Since the server got overridden in AD, it is no longer the domain controller. The DNS service is not working and all kinds of other services are failing also. So the question is, what are my options? I am embarrassed to admit it, but since this is a new server one thing I did not have setup yet was backup. So I have no backups to work from. I am worried that things are broken enough that I might need to do a reinstall. However, I already have several days worth of configuration into this server, so I would obviously prefer if there was a fix that would prevent me from needing to do a reinstall. All the server components are there and installed correctly, but they are misconfigured (I think it is basically just Active Directory). So I have the feeling that if I did the right thing I could solve the issue without a reinstall. Is there anyway to rerun the component that installs the initial configuration to "convert" the base windows server 2008 r2 install into a SBS? In other words in the program files folder there is an application called SBSsetup.exe, is there anyway to rerun this and have it reconfigure AD, etc. to work with SBS? Any insight will be greatly appreciated. Thanks.

    Read the article

  • Media Archive System with branches?

    - by Ian McEwen
    In short, how can I get VCS features (revisioning, branching, and deduplication) for a media collection that's far too large for most/all VCS systems? Background I have a 300GB music folder; unfortunately, I only have the hard drive space for this on my desktop system. However, a good portion of my collection is FLAC; therefore, I could theoretically have a space-optimized version in which I transcode all the FLAC to mp3 or some other lossy format, and use only that version on the laptop. However, a portion of my collection isn't FLAC. And that which isn't FLAC shouldn't be transcoded to an equivalent format; it won't have any space savings, which is the point. Moreover, it shouldn't be duplicated: the mp3/ogg portions of the collection should probably be exactly the same files. Thoughts One solution is to have format-specific organization of my music folders, and use some script to transcode the FLAC directory to mp3 or such into another directory. Another is some sort of hack using entirely separate copies and symbolic links for deduplication, or something similar. But these also have a disadvantage of lacking versioning; I'd like to be able to reorganize my music collection, retag things, etc. and save history. This isn't key, but would be awfully nice. I can't see it as entirely unreasonable to set up VCS hooks or something equivalent to keep directory structure synced between two copies, update tags, and transcode FLAC automatically into the space-optimized copy. Basically, the system I really want is a version control system. Two branches: one archival/desktop branch including the FLAC, one space-optimized/laptop branch without it; most VCSes would deal well with whole chunks being the same files well by compressing in a reasonable way (i.e. don't keep two copies of the same data). I could also do a lot of what I talk about above with hooks. But I don't know of any VCS that would deal with a 300GB repository with almost 20k files. Many of them would just not even initialize the whole affair; others would just do it inexpressibly slowly or otherwise badly. checkpoint looks like it's designed for something close (it's at least for media), but wouldn't do deduplication well (and I'm not convinced I'd be able to script it to do things like automatic transcoding and directory-structure syncing). So. Is there anything out there that can do all this, or should I consider it a programming project?

    Read the article

  • In search of a good audio player for Ubuntu 9.10

    - by Joe Casadonte
    If this should be marked Community Wiki, please let me know. I'm switching from XP to Ubuntu, and I have been very disappointed with the selection of media players available. I'm primarily interested in an audio player, but integrated video and library management is OK, too. My criteria: Must be able to play audio CDs (I'm shocked how many apps this does away with, right away) Must be able to play MP3 & WAV; OGG, SHN, FLAC are all bonuses Repeat and Shuffle modes are a must FreeDB / GraceNote through a proxy is a must (if it can read a PAC file, that would be awesome) It needs to be really small, e.g. skinnable or an applet Ability to execute a playlist is a plus Gapless MP3 playback a plus I'm running Gnome, but I'm not totally adverse to a KDE app. Command-line only is also a viable option. Some that I've tried: RhythmBox - probably the best of the lot that I've tried; I don't like its mini mode (doesn't show the song being played) and I can't figure out how to get it to hit FreeDB/GraceNote through a proxy Songbird - can't play CDs, playlist management is atrocious Banshee Jajuk Maybe a couple of more. Thanks! UPDATE I tried out VLC, Amarok and Songbord (again). VLC I eventually got to work (I had some kind of bad configuration). It seemed way more involved than I was looking for out of a music player, and in general more geared to video than audio. I couldn't fathom its library management, which I think it has; maybe it doesn't, and that's why I couldn't figure it out. Amaork looked very promising but the library management was not to my liking, and the way it handled a playlist with both MP3 and WAV is inexplicable at best. I did like some aspects of the UI, but not enough to keep it. Songbird is very finicky, but I like the library management. Sort of. It kept telling me my Watch folder was invalid, even thought it clearly was accessible. Playlist management is bizarre, and the message that it was deleting source files whenever I deleted a playlist had me too worried to keep using it. Had it been able to play CDs, maybe I would have persevered. Audacious, while a bit odd at times, does seem to do what I want. If it had a library manager, I wouldn't have bothered trying any of the others. Thanks for the help, everyone!

    Read the article

  • Mysql innoDB corruption after server crash

    - by Ward Loockx
    Yesterday my server died because an outage in the data center. Today it's back up, but having some problems with mysql. First of all my mysql server was not able to start. For this reason I deleted the files ib_logfile0 and ib_logfile1 in /var/lib/mysql folder (I still have the old failing files). After this my server was able to startup again. But now I see a lot of issues in the mysql log file. Sep 1 09:43:55 * mysqld: 120901 9:43:55 InnoDB: Error: page 70944 log sequence number 8 1483471899 Sep 1 09:43:55 * mysqld: InnoDB: is in the future! Current system log sequence number 5 612394935. Sep 1 09:43:55 * mysqld: InnoDB: Your database may be corrupt or you may have copied the InnoDB Sep 1 09:43:55 * mysqld: InnoDB: tablespace but not the InnoDB log files. See Sep 1 09:43:55 * mysqld: InnoDB: http://dev.mysql.com/doc/refman/5.1/en/forcing-recovery.html When I check the docs on mysql.com, I found that I need to recover my database with backups. I have a backup but not sure what's the good way on importing it. Or is there a way to recover without having to re-import the database again? So if I'm correct I need to put innodb_force_recovery to 4 in mysql and delete all current data and re-import? Is there a way to do this without having downtime? I also have one slave running. This slave has the current status now: Last_Error: Relay log read failure: Could not parse relay log event entry. The possible reasons are: the master's binary log is corrupted (you can check this by running 'mysqlbinlog' on the binary log), the slave's relay log is corrupted (you can check this by running 'mysqlbinlog' on the relay log), a network problem, or a bug in the master's or slave's MySQL code. If you want to check the master's binary log or slave's relay log, you will be able to know their names by issuing 'SHOW SLAVE STATUS' on this slave. How can I totally reset the slave after the new import on the master has happend? Hopefully we can find a solution without not to much downtime. Thanks!

    Read the article

  • Windows 2003 Storage Server Hanging on Large File Transfers

    - by user25272
    In one of our offices we have a Dell PowerVault 745N NAS device which acts as the main file server. Its running 32bit Windows 2003 Storage Server SP2 with 3GB RAM. The server holds around 60 users HOME folders, which are mapped via AD. The office clients are a mix of XP SP3, Vista and Windows 7. Occasionally the server will completely hang when transferring large files. When the hang happens the console becomes unresponsive with only the mouse active and blank wallpaper. Sometimes stopping the copy frees the server, sometimes not. The hanging can last around 20 minutes. During this time other servers also become unresponsive with blank wallpaper at the console. If you do manage to get onto another server the taskbar and run commands are unresponsive. This also transcends to the client computers sometimes with explorer crashing. I'm guessing this is due to the HOME folder mapping. Eventually the NAS server with free up and everything will be back to normal. The server is configured as follows: PERC 4/DC DATA 2 - 12 SCSI HDD - RAID5 SHADOWCOPY 2 SCSI HDD - RAID1 CERC SATA DATA 11 4 SATA HDD - RAID5 OS 4 SATA HDD - RAID5 All the drivers and firmware is up to date. I've been through all the diagnostics with Dell and the hardware has come up clean including full HDD tests on the arrays. The server has NOD32 installed as the AV, but the hanging happens when it is uninstalled. There are no errors in the event log when this happens and we don't have any errors logged on any of our ProCurve switches. DNS is fine on the domain and AD from what I can tell is running happily. There are no DFS or NFS shares setup either. All the shares are standard Windows. I've unchecked the allow the computer to turn off this device to save power box under Power Management on the NIC. "Set Link Speed and Duplex to Auto-negotiate 1000 " Increased Receive Descriptors buffer from 256 to 352 (reserves more CPU resource for handling data) I've run network traces using network monitor and have found the following: 417 8.078125 {SMB:192, NbtSS:25, TCP:24, IPv4:23} 192.168.2.244 192.168.5.35 SMB SMB:R; Nt Create Andx - NT Status: System - Error, Code = (52) STATUS_OBJECT_NAME_NOT_FOUND I've tried different cabling; NICs and switch ports all with the same result. Transferring files from other servers on the domain is fine. All I haven't done is run CHKDSK on the drives to look for any file system errors. On the Vista clients I have also run netsh interface tcp set global autotuning=disabled with no result. Could it be that the server has a faulty drive or that the I/O is too much for it to handle? Any ideas why would the hang cause issues with the other servers on the LAN? Many Thanks.

    Read the article

  • Automating silent software deployments on Solaris 10

    - by datSilencer
    Hello everyone. Essentially, the question I'd like to ask is related to the automation of software package deployments on Solaris 10. Specifically, I have a set of software components in tar files that run as daemon processes after being extracted and configured in the host environment. Pretty much like any server side software package out there, I need to ensure that a list of prerequisites are met before extracting and running the software. For example: Checking that certain users exists, and they are associated with one or many user groups. If not, then create them and their group associations. Checking that target application folders exist and if not, then create them with preconfigured path values defined when the package was assembled. Checking that such folders have the appropriate access control level and ownership for a certain user. If not, then set them. Checking that a set of environment variables are defined in /etc/profile, pointed to predefined path locations, added to the general $PATH environment variable, and finally exported into the user's environment. Other files include /etc/services and /etc/system. Obviously, doing this for many boxes (the goal in question) by hand can be slow and error prone. I believe a better alternative is to somehow automate this process. So far I have thought about the following options, and discarded them for one reason or another. 1) Traditional shell scripts. I've only troubleshooted these before, and I don't really have much experience with them. These would be my last resort. 2) Python scripts using the pexpect library for analyzing system command output. This was my initial choice since the target Solaris environments have it installed. However, I want to make sure that I'm not reinveting the wheel again :P. 3) Ant or Gradle scripts. They may be an option since the boxes also have java 1.5 enabled, and the fileset abstractions can be very useful. However, they may fall short when dealing with user and folder permissions checking/setting. It seems obvious to me that I'm not the first person in this situation, but I don't seem to find a utility framework geared towards this purpose. Please let me know if there's a better way to accomplish this. I thank you for your time and help.

    Read the article

  • amazon ec2 ubuntu with gitlab and nginx - cant load?

    - by thebluefox
    Ok, so I've spooled up an Amazon EC2 server running Ubuntu, and then followed the instructions below to install GitLab; http://doc.gitlab.com/ce/install/installation.html The only step I've not been able to complete is running the following check on the status; sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production I get the following error; rake aborted! Errno::ENOMEM: Cannot allocate memory - whoami Which I presume is becuase my EC2 is just running a free tier setup, so isn't that well spec'd. Regardless, I've been trying to access this through my browser. I've set up the elastic IP and pointed my domain at it (for the purpose of this, lets say its git.mydom.co.uk). Doing a whois on this domain shows me its pointing to the right place. For some reason though, I get the "Oops, Chrome could not connect to git.mydom.co.uk". Now - for a period of time I was getting the Nginx holding page (telling me I still needed to perform configuration). This though disappeared after removing the default file from /etc/nginx/sites-enabled/ (after reading this could be issue on a troubleshooting page). Since then, I've had nothing, even when I symlinked the file back in from /sites-available. I've tried changing the owner of the git.mydom.co.uk file sat inside /sites-enabled and /sites-available to www-data, as suggested here, but I could only change the permission of the file in /sites-available, and not the symlinked one in /sites-enabled. The content of this file is as follows; upstream gitlab { server unix:/home/git/gitlab/tmp/sockets/gitlab.socket; } server { listen *:80 default_server; # e.g., listen 192.168.1.1:80; In most cases *:80 is a good idea server_name git.mydom.co.uk; # e.g., server_name source.example.com; server_tokens off; # don't show the version number, a security best practice root /home/git/gitlab/public; # Increase this if you want to upload large attachments # Or if you want to accept large git objects over http client_max_body_size 20m; # individual nginx logs for this gitlab vhost access_log /var/log/nginx/gitlab_access.log; error_log /var/log/nginx/gitlab_error.log; location / { # serve static files from defined root folder;. # @gitlab is a named location for the upstream fallback, see below try_files $uri $uri/index.html $uri.html @gitlab; } All the paths mentioned in here look ok...I'm about at the end of my knowledge now!

    Read the article

< Previous Page | 727 728 729 730 731 732 733 734 735 736 737 738  | Next Page >