Search Results

Search found 22065 results on 883 pages for 'performance testing'.

Page 733/883 | < Previous Page | 729 730 731 732 733 734 735 736 737 738 739 740  | Next Page >

• Cannot access Domain Controller through VPN

  - by Markus

  In our small network there is a Windows 2008 R2 Domain Controller that also serves as Remote Access Server. For years, we could access this server and the resources in the network over a VPN connection without any problem. Since some time however, I am able to connect to the VPN, but my Windows 8 client (and another one I used for testing purposes) is not able to connect the domain controller afterwards. I can access any other server in the network, but there seems to be a problem regarding the trust between the client(s) and the server. If I connect the client to the network directly over a LAN cable, everything works as expected. Also I can connect to another server over VPN and open a RDP prompt to the DC without a problem. On the client, whenever I try to access the DC, I get an access denied message. I've tried to update the group policies both over VPN and LAN. Also, I've removed the client from the domain and re-added it. The client shows a message that Windows requires valid login information when connected to the VPN - but my credentials are valid. They work when I logon to the client when not connected to the VPN and also when connected to the LAN. Turning off the firewall on the client and the server did not change anything. DNS resolution works both on the server and the client. What else can I do to diagnose and solve the problem?

  Read the article

• ImageMagick installation confusion

  - by Codemonkey

  Well this is turning out to be a pain. I'm on CentOS 6.5. I saw on the PECL ImageMagick changelog that they added a load of constants for new filters, such as LANCZOS2SHARP. Some testing I did earlier suggested that PhotoShop 6.5 was able to downsize photos with better clarity than my current ImageMagick's best effort of LANCZOS, so I thought I'd try to upgrade to test out the newer filters. So, first port of call - get source from pecl for 3.2.0RC1. Installed with no problems. But, ah-ha. Although it says it only requires IM 6.2.4, the filters I'm after don't work unless you have 6.6.6+ So I go http://www.imagemagick.org/script/install-source.php to install the newest version. This is the bit that's puzzled me. It all appears to have installed fined. The tests work fine, passing 40 out of 40. If I run identify -version on the command line it outputs 6.8.9 But if I echo Imagick::getVersion() in PHP it shows 6.5.4, even after restarting php-fpm. rpm -qa | grep ImageMagick shows that I still have 6.5.4 installed locate ImageMagic also only seems to show the 6.5.4 one I feel that the missing link here is ImageMagick-devel, do I need to install that too? How do I go about doing that? Or do I just need to reinstall the pecl-imagemagick 3.2.0RC1 now that I have the latest IM installed?

  Read the article

• What should I use to ping multiple IPs and get notified of time outs?

  - by HumanVirus

  I've been using MultiPing to ping hundreds of IPs (from access points and such) and check their performance (packet loss, latency) and uptime. The program is very easy to use, but I was wondering if someone could recommend me something that would work better and that would also work in Linux. The features I'm looking for are: Notification Types: At least desktop notifications and SMS, but it would be great if it also had e-mail, IM, or other types of notifications. (MultiPing has some of these, but they don't work too well.) Being notified about the root problem only: Since some devices are dependent on others, I'd like to be notified only about the root problem. E.g. Let's say I have A[x.x.x.222]B[x.x.x.33C[x.x.x.44]D[x.x.x.55], and B goes down, therefore C and D will also be down. Is it possible to get a notification only about B being down? Light on resources. Ideally multiplatform or at least available for both Linux and Windows. I've heard about Nagios and Shinken being used for monitoring. Would you recommend that I use something of the sort or would that be too much for my needs? If using Nagios, Shinken, or similar software is recommended, can anyone tell me what sites I should go to or what books I should get that would be good for someone who is totally new at this? I'd appreciate any suggestions.

  Read the article

• Enabling `mod_rewrite` apache, permissions issues

  - by rudolph9

  In attempting to enable mod_rewrite on the Apache2 web server installed with Mac OSX 10.7.4. Following these instruction, ultimately using the configuration to host CakePHP applications, I run into permissions issues accessing the site via a web browser when I set the directory block associated with cakephp site /etc/apache2/users/username.conf from: <Directory "/Users/username/Sites/"> Options Indexes FollowSymLinks MultiViews AllowOverride none Order allow,deny Allow from all </Directory> /etc/apache2/users/username.conf to: <Directory "/Users/username/Sites/"> Options Indexes MultiViews AllowOverride none Order allow,deny Allow from all </Directory> <Directory "/Users/username/Sites/cakephp_app/"> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny Allow from all </Directory> The .htaccess files are the CakePHP 2.2.2 default as follows: /Users/username/Sites/cakephp_app/.htaccess <IfModule mod_rewrite.c> RewriteEngine on RewriteRule ^$ app/webroot/ [L] RewriteRule (.*) app/webroot/$1 [L] </IfModule> /Users/username/Sites/cakephp_app/app/.htaccess <IfModule mod_rewrite.c> RewriteEngine on RewriteRule ^$ webroot/ [L] RewriteRule (.*) webroot/$1 [L] </IfModule> /Users/username/Sites/cakephp_app/app/webroot/.htaccess <IfModule mod_rewrite.c> RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ index.php [QSA,L] </IfModule> When performing the request via a web browser at to http://0.0.0.0/~username/cakephp_app/index.php the content of the response is Not Found The requested URL /Users/username/Sites/cakephp_app/app/webroot/ was not found on this server. Apache/2.2.21 (Unix) DAV/2 PHP/5.3.10 with Suhosin-Patch Server at 0.0.0.0 Port 80 Upon a request to http://0.0.0.0/~username/ and http://0.0.0.0/~username/cakephp_app/, added to /var/log/apache2/error_log accordingly are the following: [Tue Sep 04 22:53:26 2012] [error] [client 127.0.0.1] File does not exist: /Library/WebServer/Documents/Users, referer: http://0.0.0.0/~username/ [Tue Sep 04 22:53:26 2012] [error] [client 127.0.0.1] File does not exist: /Library/WebServer/Documents/favicon.ico What is causing the issue? Is there server program, ideally available via a homebrew script, which would make hosting CakePHP applications for testing purposes more effective and efficient?

  Read the article

• Output current with Teensy++ 2.0 (arduino-based hardware)

  - by omtinez

  I am working on a project with a Teensy++ 2.0 for testing, eventually the goal is to use a Teensy 2.0 (info on both available here) and mount it onto a robot R/C car along with a Raspberry Pi. I have been able to use and test one of the very cheap distance sensors that use ultrasound, which requires very little current. I was trying to power a motor, I don't know exactly what kind of motor but I assume a very low-power one which is what comes with the R/C car cheapo, but nothing is happening. When I plug the motor to GROUND and +5V it runs fine, but when I use GROUND and one of the GPIO pins then nothing happens with the motor. The same GPIO pins were tested to successfully power and run the ultrasound sensor, so the board is fine. My suspicion is that the GPIO pins don't output enough current to power the motor, but my knowledge of electronics is rather scarce (I am a computer scientist, not an electrical engineer). So please forgive me if I am asking something obvious or plain stupid, but does the board not have enough power to power the motor? If so, I could try to use a second power supply that would go straight into the motor and use the GPIO as a gate to turn that power on and off; would such thing work? Is there a better design that could be used?

  Read the article

• USB Hub vs. Dockinstation USB vs. Laptop USB

  - by Will

  I recently had thougts about my current setup in my office, especially about the UBS ports distribution. Here's my setup: I have a Lenovo T410 docked to a Lenovo Dockingstation Series 3, that providey me with 6 USB ports, which I use all (3 ext. drives, mouse, keyboard, USB Hub of monitor). The USB hub on my ext. monitor (most probably powered by the ext. monitor's power supply) provides me with 2 USB ports, where I use one for my webcam and another for USB sticks. On my T410 itself I have 4 USB slots, that are usually not used, as don't want to mess with USB plugs when undocking my laptop, now and then I plug my printer on one of these, just because I don't have any UBS ports left. Now I'm wondering how fast each of these slots are: I assume that all the 6 USB ports from the dockinstation somehow go through the docking connector on the bottom of my laptop. Does this connector has such a big bandwidth for all these 6 USB ports to perform like if they were dedicated ports as the 4 ones on my laptop? Also how is generally the performance of USB hubs (like the one on my ext. monitor?)?

  Read the article

• Join multiple consecutive SQLite database dump files into 1 common database? Purpose: Search through ENTIRE Chrome Browsing History

  - by porg

  Google Chrome 's default web browsing history search engine only lets you access the records of the recent 100 days. Nevertheless in your application data, Chrome keeps your entire browsing history in SQLite database files, with the file naming scheme of "History Index YYYY-MM". I am looking for a way to search… …through my entire browsing history, …with sophisticated filters (limit search terms to certain fields such as URL, domain, title, body text; wildcard or regex terms, date ranges). … in … …either some ready-made software. eHistory came close, as it can limit terms to fields, but it lacks wildcards/regexes, and has the same limited time horizon as the default search. Beyond that, I could not find any suited Chrome extension or standalone (Mac) app. …or a command line to join multiple SQLite database files into one database, which I can then query (with the full syntax power). In the spirit of the pseudo code below: Preferred this way: sqlite --targetDatabase ChromeHistoryAll --importFiles /path/to/ChromeAppData/History\ Index* --importOnlyYetUnknownFiles Or if my desired feature --importOnlyYetUnknownFiles is not possible (feature could also be called "avoid duplicate imports by checking UIDs"), then by explicitly only importing files, of which I know, that they have yet not been imported into the ChromeHistoryAll database: cd ChromeAppData; sqlite --databaseTarget ChromeHistoryAll --importFiles YetNotImported1 YetNotImported2 YetNotImported3 All my queries I would then perform in the database "ChromeHistoryAll" P.S.: Additional question of general interest: Is there a way to perform a database query in a temporary database which was created on-the-fly from multiple files? Like: sqlite --query="SQL query" --targetDatabase DbAll --DBtemporaryInRAM --importFiles db1 db2 db3 This is surely not applicable for my Chrome question, as these History Index files have a combined file size of 500MB together, thus such a query would be of bad performance. But it could come handy in other situations.

  Read the article

• how to build network across buildings ?

  - by Omie

  Hi ! I need some help in building a network between hundreds of computers spread across multiple buildings of my college. Yes, I'll be doing this as a part of my college project. Please see this image, it will give you enough idea of what I'm trying to achieve. http://i.imgur.com/rOohx.png All the computers in all buildings should be able to connect server. Once network is up, there will be a set of services over intranet and network use will be moderate. well, say there will be an email server and a http server. My point is, I cannot afford much of performance loss. It feels easy to connect computers inside 1 building to each other, however, I'm clueless as to how to connect all of them to server. I mean, just 1 cable won't be enough to connect 1 building to server, right ? How should I go with it ? I am not expecting detailed configuration. Just heads up will do :) Thanks

  Read the article

• How to push changes from Test server to Live server?

  - by anonymous

  As a beginner, I finally noticed the issue with making changes to the live server I've been working on, now that I have a couple users on it, since I bring it down so often. I created an EC2 image of my live server and set up a separate instance on EC2, so now I have 2 EC2 instances, Stage and Production. I set up GitHub and push changes to stage and test my code there, and when it's all done and working, I push it to the production branch, and everything is good. And there is a slight issue here since I name my files config_stage.js and config_production.js and set up .gitignore on each server, and in my code, I would have it read the ENV flags and set up the appropriate configs, is this the correct approach? And my main question is: how do you keep track of non-code changes to the server? For example, I installed HAProxy, Stunnel, Redis, MongoDB and several other things onto the Stage server for testing and now that it's all working and good, how do I deploy them to production? Right now, I'm just keeping track of everything I installed and copying configuration files over, which is very tedious and I'm afraid I may have missed a step somewhere. Is there a better way to port these changes over from my test server to my live server?

  Read the article

• How do I get Tomcat 7 to start up faster in Linux CentOS kernel version 2.6.18?

  - by user1786833

  I am experiencing a problem with slow start up times for Tomcat 7. I have done some testing by tweaking configuration parameters both on Linux CentOS kernel version 2.6.18 and on Windows 7 using this link as my primary guide: http://wiki.apache.org/tomcat/HowTo/FasterStartUp and managed only a modest improvement. The improvements seemed to result when I added metadata-complete="true" attribute to the element of my WEB-INF/web.xml file and when I added the names of almost all the jars we use for our application to the tomcat.util.scan.DefaultJarScanner.jarsToSkip property in conf/catalina.properties file. I've also used this JAVA_OPTS in the setenv.sh file: JAVA_OPTS="$JAVA_OPTS -server -Xms1536m -Xmx1536m -XX:MaxPermSize=256m -XX:NewRatio=2 -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Dsun.rmi.dgc.client.gcInterval=1800000 -Dsun.rmi.dgc.server.gcInterval=1800000 -Dorg.apache.jasper.runtime.BodyContentImpl.LIMIT_BUFFER=true " but actually saw my start up times increase slightly. Our QA and production environments are on Linux CentOS so I'm hoping to get more information on improving Tomcat 7 start up times in that environment. My primary role is java developer and I don't have much system administration experience so I appreciate any input. Thank you for your time and suggestions.

  Read the article

• Windows Server 2008 Alerting to Low memory

  - by t1nt1n

  I have a file and print server running on Windows 2008 R2 fully patched in a VSphere environment (ESXi 5.1 fully updated). Every evening between 19:20 and 19:30 our monitoring software reported that the available memory is 1% and performance is dire. There is nothing in the event logs to point to an issue. At this point in the evening I am general the only user on the system to check to see why these alerts are going off. Things I have done; Checked to see if any backups are running – None at all. Checked Scheduled tasks – None before or during this time period. Moved the VM to another host. AV is disabled to rule out that as the issue. The server does not have any problems during the day with memory when fully loaded with about 50 users. The server did have 4GB ram provisioned but I have increased this to 5Gb. Running PrefMon at the time (I will save the graphs tonight) There very little CPU usage at the time but RAM usage goes up.

  Read the article

• Using Openfire for distributed XMPP-based video-chat

  - by Yitzhak

  I have been tasked with setting up a distributed video-chat system built on XMPP. Currently my setup looks like this: Openfire (XMPP server) + JingleNodes plugin for video chat OpenLDAP (LDAP server) for storing user information and allowing directory queries Kerberos server for authentication and passwords In testing with one set of machines (i.e. only three), everything works as expected: I can log in to Openfire and it looks up the user information in the OpenLDAP database, which in turn authenticates my user with Kerberos. Now, I want to have several clusters, so that there is a cluster on each continent. A typical cluster will probably contain 2-5 servers. Users logging in will be directed to the closest cluster based on geographical location. Something that concerns me particularly is the dynamic maintenance of contact lists. If a user is using a machine in Asia, for example, how would contact lists be updated around the world to reflect the current server he is using? How would that work with LDAP? Specific questions: How do I direct users based on geographical location? What is the best architecture for a cluster? -- would all traffic need to come into a load-balancer on each one, for example? How do I manage the update of contact lists across all these servers? In general, how do I go about setting this up? What are the pitfalls in doing this? I am inexperienced in this area, so any advice and suggestions would be appreciated.

  Read the article

• How many guesses per second are possible against an encrypted disk? [closed]

  - by HappyDeveloper

  I understand that guesses per second depends on the hardware and the encryption algorithm, so I don't expect an absolute number as answer. For example, with an average machine you can make a lot (thousands?) of guesses per second for a hash created with a single md5 round, because md5 is fast, making brute force and dictionary attacks a real danger for most passwords. But if instead you use bcrypt with enough rounds, you can slow the attack down to 1 guess per second, for example. 1) So how does disk encryption usually work? This is how I imagine it, tell me if it is close to reality: When I enter the passphrase, it is hashed with a slow algorithm to generate a key (always the same?). Because this is slow, brute force is not a good approach to break it. Then, with the generated key, the disk is unencrypted on the fly very fast, so there is not a significant performance lose. 2) How can I test this with my own machine? I want to calculate the guesses per second my machine can make. 3) How many guesses per second are possible against an encrypted disk with the fastest PC ever so far?

  Read the article

• Which would be more reliable for data archival - SD card or a generic USB thumbdrive?

  - by Visitor

  I've been thinking lately what should I preferably use for data storage and archival. I will say in advance that I do not use flash memory as the only storage media - I also keep my data on the hard drives and optical disks - flash memory is but one of the several backup solutions that duplicate each other. For the flash memory however I do have a choice - to use a generic USB thumbdrive or a SD card. Are there any indications that SD cards may be better and more reliable? From browsing people's review on the web I see that many complaints about USB sticks have to do with them completely failing, losing file system and stop being recognized by the OS. At the same time, most of the complaints for SD cards deal with just write speeds not holding up to the promise - failure reports are but a portions of those for the USB sticks. Are SD cards indeed more reliable? Am I also correct in my assumptions that SD cards use higher grade NAND chips than USB thumbdrives? At least, for class 10 cards, because the specification dictates the minimum performance and the manufacturers have to preselect better chips. While it is common for USB sticks to promise high speeds "up to XX MB/sec" but the reality is they very often deliver speeds 2-3 times less than promised. Do SD cards get better NAND chips and USB thumbdrives receive the discarded chips? Any thoughts would be appreciated.

  Read the article

• How can I tell System Restore in WIndows 7 recovery console to use my recovered backup drive's restore point data?

  - by Rich Shealer

  My Windows 7 desktop PC failed to boot. It would get to a grayish screen with a mouse and would only respond to the power button. After much examination I found that the problem was not a failed drive as running CHKDSK from the Recovery Console on my main drives passed without any errors. I had been installing various Java version in the days before the failure so I decided to use a restore point to roll backwards. I have an external SATA drive controller with two 2 TB drives mirrored using the Windows mirroring function. My system has been backing up to this drive regularly. The problem is I accidently broke the mirror when testing to see if this drive system might have been causing my boot issue. Connecting it to another machine showed two dynamic drives that were invalid. In the end I reformatted one as an NTFS basic disc and used recovery software on the other to copy all of the files to the reformatted drive. I had to copy the restore points into the new drive's System Volume Information folder by granting rights to that user. I moved the drive back to the original machine and rebooted. I can see my new drive, it even uses the same drive letter as it did in normal mode. Running System Restore it lists a new Automatic Restore point created while sitting at the RC along with all of my backups. Selecting the backup I want (or any other) I get a dialog. The backup drive could not be found. System Restore is looking for restore points on your backup. Make sure the backup drive is on and connected to this computer and then click OK. What do I need to do to allow system restore to see the restore points?

  Read the article

• Can I host multiple sites with one Amazon EC2 instance [duplicate]

  - by user22

  This question already has an answer here: Can you help me with my capacity planning? 2 answers I currently have VPS server and I pay around $75 per month and I get: 40GB HD 2Gb RAM 100GB BW 6 core cpu (but i dont use much) I have only one live website running and traffic is only max 100 user visit per day. I mostly do the my testing stuff and some of my inter sites for playing with coding. But I do need one server. I am thinking of moving to Amazon EC2 if the price diff is not so much because then I can learn some more stuff. I am thinking of getting the 3 years Heavy utilization Reserved instance because my server will be running all day and night. I tried their online caluclator with Medium Instance Heavy reserved for 3 years for EC2 it comes $31 per month(effective price) and for EBS and S3 , I think even if thats it $40 for all other stuff. I will be at no loss for what I am getting at present. Am i correct or I missed something?? Now In my current VPS I have Apache for PHP sites and MOD wsgi for python sites. I am not sure if I will be able to do all that stuff in Amazon EC2. Can I host python and PHP sites both in Amazon EC2 instance using Named Virtual Hosts and Ngnix

  Read the article

• Determining how all memory is used in Windows Server 2008

  - by Mojah

  I have a Windows Server 2008 system, which has 12GB of RAM. If I list all processes in the Task Manager, and SUM() the memory of each process (Working Set, Memory (Private Working Set), Commit Size, ...), I never reach more than 4-5GB that should be "in use". However, task manager reports this server has 11GB in use via the "Performance" tab. I'm failing in determining where all that used RAM is going. It doesn't seem to be system cache, but I can not be sure. It might be a memory leak in one of the appliances, but I'm struggling to find out which one. The server's memory keeps filing up, and eventually forces us to reboot the device to clear it. I've been reading up on how RAM assignments work on Windows Server: RAM, Virtual Memory, Pagefile and all that stuff: http://support.microsoft.com/kb/2267427 What's the best way to measure? http://www.zdnet.com/blog/bott/windows-7-memory-usage-whats-the-best-way-to-measure/1786 Configure the file system cache in Windows: http://smallvoid.com/article/winnt-system-cache.html But I fear I'm stuck without ideas at the moment.

  Read the article

• Methods and practices for managing a network that has no internet connection

  - by FaultyJuggler

  Originally asked in Super User but realized this belongs here. Long story short, I am setting up a network with 32 servers of varying specs that will be used for testing and development. We will be using RedHat Linux, we also do not have a router as of yet and were looking into making one of the servers act as our router/DHCP etc. The small cluster will be on an isolated network with no internet. I can use external harddrives and discs to transfer anything from external sources into machines on the network, so this isn't a locked down secure network, it just won't have a direct connection to the outside world. I've worked on such setups before, but always long after they were setup. So I'm reaching out to see what everyone knows as far as how groups have handled initial setup and maintenance of such a situation. What is the best way to get them all configured and up to date? What are the best ways to automate updates, network wide installs, etc. With the only given that I have large multi-terabyte external hard drives that would be used to drop whatever files are needed onto a central server, how do i then distribute those files and install their contents? I've done perl scripting, some teammates have played with puppet, so we aren't completely in the dark, I just wanted to avoid reinventing the wheel since this is a common challenge.

  Read the article

• When buying hardware, what sites do you trust for information? [closed]

  - by Matt Dawdy

  I won't ask "what laptop should I buy" since the information is likely to change very quickly. However, I am about to buy a laptop, and I honestly don't know where to begin researching this based on my needs. I am hoping that asking about specific sites that do reviews/recommendations that this will still be on topic. I read the 6 guidelines for subjective questions and believe that this question scores favorably. I'm starting a new job in a few weeks, and they want to know what specific laptop to purchase. I'd like to get the most for their money and get a machine that will not need to be replaced in a year. When looking at a site like Dell, it's hard to get a full picture of the performance of a laptop. Does it work with a docking station, and if so, what kinds of video outs are on it? Will it work well when compiling several large projects in .Net? Has anyone had any issues with the machine getting flaky when dragging it from work to home and back all the time? etc. So, if people would enter in their preferred sites they use when researching hardware, and why they prefer that site (x is great for laptop comparisons, y is great for gaming machine reviews, etc) the I hope that this can be a question with valuable answers to others than just myself.

  Read the article

• Best SSD tweak for Windows 7

  - by Nick Berardi

  I have seen many articles about tweaking an SSD, but many of them seem outdated, or too broad (read all Windows XP, Vista, and Windows 7 general tweaks). And I know that Windows 7 has been specifically tweaked for SSD by the Windows team, so I don't want to do something that was written for Windows XP in mind and end up circumventing something the Windows team has specifically designed in to Windows 7. So my question is what are the best SSD tweaks for Windows 7 that you have found to get the performance out of your drive? I hope to make a comprehensive list in the answers below so there won't be so much disinformation in the forums about what to do and what not to do. Here are a few that I see posted up on the forums alot: Disabling Superfetch. Yes or No Disabling Page File or limiting it to a really small size such as 500 MB. Disabling Indexing. Yes or No Disabling Defragmenting. Yes or No What are your thoughts do you have any that have worked for you? When providing an answer please do your best to back it up with a reason and possibly some documentation from MSDN, TechNet, or another credible source.

  Read the article

• Integrating external computer into a domain - some recommendations please

  - by TomTom

  Given: * A multi loation company. Every office has local routers that connect to a central VPN capable rouer in a data center. All fine so far. We now need to move a computer off site into a hosting center across the globe, to get it closer to some supplier computers we work for. it will run limited logic but latency is important, and our latency so far is too large. This computer will be in a data center and does no require incoming connections except for adminsitrative purposes, although it needs outgoing connetions. I have no real chance to put one of my VPN routers there, sadly - otherwise I would have no problem. Usage of RRAs is not recommended (we had various probblems there over time). I could deal with it. The computer MUSt integrate into the corporate structure via VPN and join the domain and be fully "tracked" (controlled for performance). What is the best suggestion? So far it looks like my best bets woudl be to log in via RRAS and deal with whatever issues arise there plus uise the local firewall the limit incoming connections to this computer to what is needed (which runs down to an emergency RDP connection allowance). Anyone a better idea?

  Read the article

• Raspberry Pi how to format HDD

  - by Speed

  Hi I am very new to Raspberry Pi environment, so looking for a bit of help to format a usb hard disk drive. I ran lsblk and got sda 8:0 0 37.3G 0 disk sda1 8:1 0 37.3G 0 part looking on web, if tried the following "sudo mkfs.ext4 /dev/sda1 -L USB40gb" it did something but when I tried to mount the drive again, it still showed the files that were there before and I can not create new file/folder "Error creating directory: Permission denied" I am writing this from my windows 8.1 pc so can not cut and paste from the pi. trying to format its output is a bit hard. Oh, there is Nothing written after the word "part" above. There use to be /media/USB40gb so I have done something because this has disappeared. I am using PCManFM 0.9.10 It does not have a format option, which would make life a lot easier, but then its not windows. I think I am running the basic linux os for the pi. It boots to a graphic environment, but I do not know how to advise what it is. I think its OpenBox 2.0.4 Thanks in advance Speed PS: I reran the format string above but this time I changed the label to read USB37gb. I did this to confirm that I was in fact formatting the right drive. Low and behold, it actually formatted the drive, wiping everything from it. Great ... testing it by creating a new folder on the drive and get error msg Permission Denied! So I have fixed the formatting issue by trial and error but still can't use the drive... Suggestions anyone?

  Read the article

• Computers on network crashing

  - by Phil Cross

  We have recently upgraded our network to Windows 7 clients with Windows server 2008 servers. The upgrade was completed by the end of September and until now has been fine (apart from the minor bugs). Recently (within the last 2 weeks) we've notice all computers on the network (around 1000) start to slow down to the point their unusable. It starts at about 08:45 and finishes at 09:15. Because of this, we think something may be broadcasting across the network. This happens every day, between these times. I cant use my computer at all at the slowdown peak, and looking at task managers performance graphs, Physical memory is hovering around 35% and CPU usage is at 0-10% (idle) yet still crashing. I've looked on DHCPs server log and cant see anything which stands out. The only change we made prior to the slowdown was installing adobe CS6 on some computers, however the slowdown affects computers without CS6. We have 2 physical machines, each with around 5-7 virtual machines running on them with ample memory. Does anyone have any suggestions as to what we can do to narrow down whats causing the crashes? Any help, suggestions or advice would be appreciated.

  Read the article

• what is best multi-server configuration with OpenVPN

  - by sebut

  We have a number of Database severs running MongoDB on Debian plus a number of Application servers also on Debian. The db servers hold replicating db clusters, so they need to talk to each other. Application servers need to talk to all db servers (for reasons of fault tolerance). The servers are potentially spread across multiple hosting centers, so we need secure channels between all servers. The number of servers is bound to grow, so we need a VPN solution that's easy to maintain and expand. This is why I feel that SSH that we use for testing might not be up to the task and OpenVPN seems the way to go. I have ruled out TAP, since I understand that this would mean all traffic going to all the servers - perhaps this is a misunderstanding and TAP acts more like a switch? With TUN devices I imagine that all DB servers would live in their own separate subnet, they would also need a client configured to be able to connect to each of their peers. The application servers could live in a common subnet range with a client config only. Does this sound like a reasonable setup? Strangely, on the web I did not find anything about multi-server with OpenVPN. Thanks for all insights and ideas!

  Read the article

• SSH very slow when connecting from external [closed]

  - by wnstnsmth

  Possible Duplicate: ssh delay when connecting We have a CentOS server that we use for internal testing purposes, which has sshd enabled. When I (as a developer) am at the company, I use ssh [email protected] to connect to it - and it works flawlessly. Now, in order to work from home, accessing the server via the company's static IP, we set up another port for ssh, 2020. So I execute ssh -p 2020 [email protected] and am immediately granted for a password. After entering the password, it takes up to 30 seconds until I can access the server. Same is with SFTP (i.e. uploading files takes about 30 seconds until it begins to transfer). As you can imagine, if you have to regularly upload files to a webserver via SFTP, this is very tedious. So I looked at similar questions and thus edited the sshd_config file on the server, setting UseDNS to "no" and GSSAPIAuthentication to "no" (this one also in ssh_config on the client) - it did not work.. Please have a look at the -vvv output when externally accessing the server: ssh -p 2020 -vvv [email protected] PasteBin: ssh What could it be? Do you need more info?

  Read the article

< Previous Page | 729 730 731 732 733 734 735 736 737 738 739 740  | Next Page >