Search Results

Search found 30524 results on 1221 pages for 'display errors'.

Page 736/1221 | < Previous Page | 732 733 734 735 736 737 738 739 740 741 742 743  | Next Page >

  • How do I Connect a 30yr-old Tandy 1400LT laptop to the internet?

    - by Clemens Bergmann
    Just for the fun of it, I want to get an old Tandy 1400LT laptop: small monochrome display two floppy drives rs-232c connector "printer" connector connect the thing the internet and use it as an ssh terminal. How would I connect it to the internet? The software should be no problem as it is a 386 hardware. There should be a small linux distribution which can be run on it. But how would I phisically connect the hardware? It has no ethernet port. Has someone experience with Serial/Paralel-to-ethernet converters?

    Read the article

  • Hybrid Graphics on Windows 7/Ubuntu 12.04 Dual Boot

    - by Noob.
    Alright, so here's the situation: I am using an ASUS UL80VT with two graphics cards: Integrated intel graphics and NVIDIA G210M I was running an Ubuntu 12.04 - Windows 7 dual boot (on separate partitions).The machine worked perfectly (including the display drivers) without me needing to install anything special or change any settings. However, my hard drive was corrupted and I lost all my data yesterday, so after it was replaced, I installed Ubuntu 12.04 64x again after installing Windows 7. I booted up Ubuntu after installation, and noticed it was by default using Unity 2D... Gnome 3.4 wasn't working properly either, so I guessed that the NVIDIA G210M driver wasn't installed/working and the OS was instead using the integrated graphics. I checked the "Additional Drivers" thing, but there were no proprietary drivers listed there, so I went to the NVIDIA website, downloaded the driver directly and installed it. I restarted, but there was no change. After this, I read somewhere that I should change my SATA in the BIOS to "Compatible" rather than "Enhanced". This worked fine and fixed the problem (both Unity and Gnome were working perfectly) but then when I tried booting up Windows 7, I recieved the BSOD. So I changed it back to Enhanced, and once again, the NVIDIA 210M graphics isn't working on Ubuntu, but on Windows 7 it is. I do not want to keep changing from Enhanced to Compatible every time I reboot to Ubuntu and neither do I want to simply just use one OS. Note that NVIDIA 210M and integrated graphics work perfectly on Windows 7. Also, I don't care about switching between them, I just want to be able to use the NVIDIA one. What can I do so that both Windows 7 and Ubuntu work and NVIDIA G210M works on Ubuntu?

    Read the article

  • Second monitor not detected

    - by configurator
    Note: I've seen this question quite a lot, but in all the cases I could find with answers, the answer was either "I don't know" or "use nvidia-settings (which is irrelevant to me)." I'm using Intel Sandybridge Desktop graphics, with a P8H61-M LE motherboard. How do I get Ubuntu to detect my second monitor? Clicking "Detect Displays" here doesn't do anything. Here's some system info: $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) $ uname -a Linux clyde 3.5.0-13-generic #13-Ubuntu SMP Tue Aug 28 08:31:47 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ hardinfo [copied from the UI] -Display- Resolution : 1920x1080 pixels Vendor : The X.Org Foundation Version : 1.12.3 -Monitors- Monitor 0 : 1920x1080 pixels -Extensions- BIG-REQUESTS Composite DAMAGE DOUBLE-BUFFER DPMS DRI2 GLX Generic Event Extension MIT-SCREEN-SAVER MIT-SHM RANDR RECORD RENDER SECURITY SGI-GLX SHAPE SYNC X-Resource XC-MISC XFIXES XFree86-DGA XFree86-VidModeExtension XINERAMA XInputExtension XKEYBOARD XTEST XVideo -OpenGL- Vendor : Intel Open Source Technology Center Renderer : Mesa DRI Intel(R) Sandybridge Desktop Version : 3.0 Mesa 8.1-devel Direct Rendering : Yes I've tried upgrading everything from ppa:xorg-edgers/ppa and ppa:glasen/intel-driver. I've also installed various tools I've found in other threads (e.g. hardinfo) but they weren't really helpful to me as I don't know what to make of the data. How do I get Ubuntu to detect my second monitor?

    Read the article

  • Free Windows Store and Phone Developer Accounts for MSDN Subscribers

    - by Clint Edmonson
    If you are a member/subscriber to any of the following programs you are eligible to receive one-time, 12-month Windows Store and Windows Phone developer accounts.  Visual Studio Professional with MSDN Visual Studio Test Professional with MSDN Visual Studio Premium with MSDN Visual Studio Ultimate with MSDN BizSpark On September 11, 2012 Microsoft announced that Windows Store is open to individual developers (Company only registration became available on August 1st). This means that eligible MSDN subscribers will be able to select between an individual and company account when registering for their developer account benefit.   New or existing subscribers will see developer accounts listed as a benefit on the Getting Started page as well as various MSDN overview pages. Now that you have this benefit why not get started.  To activate this benefit, subscribers are provided with a unique token for each of the developer accounts. The tokens will work for both individual and company registration. To acquire and redeem the token: 1. Log into My Account. 2. Click on ‘Get Code’. A unique token will be delivered to each subscriber. 3. Click on ‘How to Register’ (link will appear once code is claimed). A developer account details page will display that includes an overview of the benefit, token and registration information. 4. Click on the link to ‘Register your code’.  This launches the developer account registration process. Ready to start developing?  Head over to Generation App to get started.

    Read the article

  • Getting visual feedback of workspace switch in xfce

    - by intuited
    Not sure if this is an appropriate question for this site, since it's not really specific to Ubuntu. Those who feel it isn't should probably respond to my crosspost on the Unix and Linux stackexchange site. Sorry for any confusion, I'm still negotiating the borderlines between these sites (and superuser.com, where I also crossposted). I guess we all are. I make heavy use of workspaces, and have a lot of them (a 6x4 grid). I usually run openbox, but am currently using a machine that doesn't have openbox set up, so I'm using xfce because it's already mostly configured to my liking. I've gotten used to getting visual feedback when I switch workspaces, showing me which one I've just moved to, and am finding myself a bit disoriented in xfce. In openbox this is a big heads-up display, which is pretty much ideal. I'm aware that the workspace switcher panel applet will highlight the active workspace, but this only seems to work for workspaces which have some desktop space showing; since I generally have all my windows maximized, this isn't super helpful. Is there a way to enable visual feedback showing the new workspace when switching workspaces in xfce?

    Read the article

  • Repository/Updating/Upgrading Issue

    - by Jakob
    The other day I was asked to upgrade from 13.04 to 13.10, at the time I was busy and hit no. I can not upgrade/update at this point, I get (error -11) or a 404 in terminal. In the software updater I get 'failed to download repository information.' I have tried changing my "Download From" setting to "Best" to "Main" and even a few other countries. And in "Other Software" I have tried disabling packages, but doesn't seem to help what so ever. I have tried several of the other commands to try and fix it, such as -fix missing or sudo apt-get update clean. P.S. This has also affected my thunderbird client, I cannot send/receive emails. Here is my error log when trying to upgrade: jakob@Skeletor:~$ sudo update-manager -d gpg: /tmp/tmpvejqvl/trustdb.gpg: trustdb created gpg: /tmp/tmpnayby6/trustdb.gpg: trustdb created Traceback (most recent call last): File "/usr/lib/python3/dist-packages/defer/__init__.py", line 483, in _inline_callbacks result = gen.throw(excep) File "/usr/lib/python3/dist-packages/UpdateManager/backend/InstallBackendAptdaemon.py", line 86, in commit True, close_on_done) File "/usr/lib/python3/dist-packages/defer/__init__.py", line 483, in _inline_callbacks result = gen.throw(excep) File "/usr/lib/python3/dist-packages/UpdateManager/backend/InstallBackendAptdaemon.py", line 158, in _run_in_dialog yield trans.run() aptdaemon.errors.TransactionFailed: Transaction failed: Package does not exist Package linux-headers-3.8.0-33 isn't available gpg: /tmp/tmp3kw_hl/trustdb.gpg: trustdb created. And let me throw in my sudo apt-get update too. Which this has been working variably too, but I don't know what to change my repositories to, and disabling does not effect: E: Some index files failed to download. They have been ignored, or old ones used instead. This is the short version, but looks exactly like this fairly consistently. Sometimes it downloads, sometimes it doesn't. Sometimes it tells me I have an update, and doesn't do anything. If it helps, I have recently had issues trying to install Samba as well, and connecting to the office's NAS Drive. Which works now, but I had to edit /etc/fstab/ and a few other things trying to get that to work as well. I understand it could also be a DNS problem, but this has been going on for a few days, as well as I've already tried changing my DNS server via my computer, however I am not allowed to alter the DNS on our company's router.

    Read the article

  • Wrong PC-projector resolution in Windows 7

    - by peter.olsson
    I'm connecting a PC-projector (Benq MP721) to a Windows 7 Professional laptop (HP 6730b). All the output settings on the laptop, including the laptop screen, changes to 1024x768 (which the projector supports). However the projector says it receives 1360x768 and asks me to change the resolution to 1024x768. I'm using mirrored display. The laptop is 1024x768 The screen resolution in the control panel says 1024x768 The Intel graphics card utilities says 1024x768 The driver for the projector is a Generic PnP Monitor Is there anything in Windows 7 that would convert my 4:3 resolution to wide screen automatically?

    Read the article

  • Apache, Rewrite Rule and Directories

    - by milo5b
    my sites-available/ file looks something like the following: <VirtualHost *:80> ServerAdmin webmaster@mysite ServerName mysite.co.uk ServerAlias www.mysite.co.uk DocumentRoot /home/mysite.co.uk/htdocs/ <Directory /home/mysite.co.uk/htdocs/> Options -Indexes FollowSymlinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/mysite.co.uk/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/mysite.co.uk/access.log combined </VirtualHost> In .htaccess (in the htdocs/), I have (amongst others) the following rewrite rule: RewriteRule ^enquiries$ /enquiries.php Somehow I have also a directory named "enquiries" (/home/mysite.co.uk/htdocs/enquiries/), and when I hit the url "www.mysite.co.uk/enquiries" I get: HTTP/1.1 301 Moved Permanently Date: Mon, 10 Dec 2012 18:53:37 GMT Server: Apache/2.2.16 (Debian) Location: http://www.mysite.co.uk/enquiries/ Vary: Accept-Encoding Content-Type: text/html; charset=iso-8859-1 And a Browser would display the directory's content. Now, I could easily rename the folder and get it sorted, but I would like to understand what's going on here. What would be the correct way to configure Apache in a way that it wont behave this way, and instead would listen to the Rewrite Rule? If I did not explain myself clearly, please feel free to ask more questions, I'd be happy to answer them. Thanks!

    Read the article

  • MVVM - child windows and data contexts

    - by GlenH7
    Should a child window have it's own data context (View-Model) or use the data context of the parent? More broadly, should each View have its own View-Model? Are there are any rules to guide making that decision? What if the various View-Models will be accessing the same Model? I haven't been able to find any consistent guidance on my question. The MS definition of MVVM appears to be silent on child windows. For one example, I have created a warning message notification View. It really didn't need a data context since it was passed the message to display. But if I needed to fancy it up a bit, I would have tapped the parent's data context. I have run into another scenario that needs a child window and is more complicated than the notification box. The parent's View-Model is already getting cluttered, so I had planned on generating a dedicated VM for the child window. But I can't find any guidance on whether this is a good idea or what the potential consequences may be. FWIW, I happen to be working in Silverlight, but I don't know that this question is strictly a Silverlight issue.

    Read the article

  • Problems with icons and shutting down Ubuntu 12.04

    - by Anders
    I recently upgraded from 11-10 to 12.04 as a dual boot (Windows 7) and am having problems with shutting down. I installed from a CD that I burned from the iso file, and to get it to boot from the CD, I needed to install the special help program from Windows that would then recognize the CD as the system booted.The installation gave me my own user account as well as a guest account. For the User account there is no "gear" icon (in the upper RH side) from which to access the shut down menu. Interestingly the icons for the Home folder, the Ubuntu One folder, and the System Settings folder are missing, although there are blank places shows these names if the mouse cursor is positioned over these areas. They will even launch with the press of a key - but no icons are visible. For the Guest account, all of these icons are visible and usable. The problem that occurs in shutting down is that I need to leave the User account, move to the Guest account (so that I can access the top right "gear" icon that has the shut down menu item) and press the shut down button. The problem here is that when the shut own menu appears and I press the confirmation that I wish to shut down the computer, the page blanks (as one might hope in the process of closing down), and then pops up with the log in menu, giving the option of logging in as a User or as a Guest. So the questions are: 1) how do you reinstate the far right top icon from which you can access the shut down drop down menu in the User account page. 2) how do you get the icons to display properly on the Left hand side (Home, Ubuntu One, System Settings, and Workspace Switcher) 3) how do you get the system to turn of when you press the shut down button! Boy oh boy! Thanks a bunch for any help!

    Read the article

  • HP Envy 14, Ubuntu 10.10 and trouble with the graphics cards

    - by Carsten Gehling
    A few days ago I bought a HP Envy 14, containing 2 graphics card: An integrated Intel graphics card, and an ATI HD 5650. I've installed Ubuntu 10.10 32-bit on the machine. Most things work fine out of the box, but the graphics cards are giving me trouble. When booting, I get the message "failed to get i915 symbols, graphics turbo disabled". Then the screen blanks out during the remaining boot period. I am able to get the display working by changing to one of the consoles, then closing and opening the laptop's lid. It seems that Ubuntu gets confused about which card to use. I've read here: http://www.andreas-demmer.de/en/2010/07/18/testbericht-linux-auf-dem-hp-envy-14 that I should be able to turn off one the cards by echoing keywords into /sys/kernel/debug/vgaswitcheroo/switch, but that path is not available on my system. The BIOS does not have any methods to switch of the ATI card. Help anyone? /Carsten

    Read the article

  • HP Envy 14, Ubuntu 10.10 and trouble with the graphics cards

    - by Carsten Gehling
    A few days ago I bought a HP Envy 14, containing 2 graphics card: An integrated Intel graphics card, and an ATI HD 5650. I've installed Ubuntu 10.10 32-bit on the machine. Most things work fine out of the box, but the graphics cards are giving me trouble. When booting, I get the message "failed to get i915 symbols, graphics turbo disabled". Then the screen blanks out during the remaining boot period. I am able to get the display working by changing to one of the consoles, then closing and opening the laptop's lid. It seems that Ubuntu gets confused about which card to use. I've read here: http://www.andreas-demmer.de/en/2010/07/18/testbericht-linux-auf-dem-hp-envy-14 that I should be able to turn off one the cards by echoing keywords into /sys/kernel/debug/vgaswitcheroo/switch, but that path is not available on my system. The BIOS does not have any methods to switch of the ATI card. Help anyone? /Carsten

    Read the article

  • secure email crashes outlook 2007

    - by Josh
    I have a number of secure emails sent to my outlook 2007 client. most arrive fine and display the prompt with regards to granting access to the certificate and then open. today i received two that when i try and open them they crash outlook. i have tried restarting outlook and my computer. please can you give me some ideas of what it could be or how i can troubleshoot this issue. i am working on Vista Utlimate x64. thanks. Josh

    Read the article

  • Using HTML5 Today part 2&ndash;Fixing Semantic tags with a Shiv

    - by Steve Albers
    Semantic elements and the Shiv! This is the second entry in the series of demos from the “Using HTML5 Today” talk. For the definitive discussion on unknown elements and the HTML5 Shiv check out Mark Pilgrim’s Dive Into HTML5 online book at http://diveintohtml5.info/semantics.html#unknown-elements Semantic tags increase the meaning and maintainability of your markup, help make your page more computer-readable, and can even provide opportunities for libraries that are written to automagically enhance content using standard tags like <nav>, <header>,  or <footer>. Legacy IE issues However, new HTML5 tags get mangled in IE browsers prior to version 9.  To see this in action, consider this bit of HTML code which includes the new <article> and <header> elements: Viewing this page using the IE9 developer tools (F12) we see that the browser correctly models the hierarchy of tags listed above: But if we switch to IE8 Browser Mode in developer tools things go bad: Did you know that a closing tag could close itself?? The browser loses the hierarchy & closes all of the new tags.  The new tags become unusable and the page structure falls apart. Additionally block-level elements lose their block status, appearing as inline.    The Fix (good) The block-level issue can be resolved by using CSS styling.  Below we set the article, header, and footer tags as block tags. article, header, footer {display:block;} You can avoid the unknown element issue by creating a version of the element in JavaScript before the actual HTML5 tag appears on the page: <script> document.createElement("article"); document.createElement("header"); document.createElement("footer"); </script> The Fix (better) Rather than adding your own JS you can take advantage of a standard JS library such as Remy Sharp’s HTML5 Shiv at http://code.google.com/p/html5shiv/.  By default the Modernizr library includes HTML5 Shiv, so you don’t need to include the shiv code separately if you are using Modernizr.

    Read the article

  • How do I reinstate my admin user privileges to global read/write

    - by Matt
    I am running Ubuntu 12.04 LTS. I only have the one user which I created when I installed Ubuntu. Everything has been fine - love it - until I updated a software package recently from the command line using sudo (not gksudo). I was having a little bother which did not make sense to me and in a fluff changed my user read/write privileges through the GUI (not even clear how I got there!). After restart I was stuck in a login loop - using the right login password but kept getting looped back to the login and could only login as Guest. I could still login with my user/password via ctrl + alt + f1 Eventually I was able to login again at start up. Not sure exactly what it was I changed that worked but it was one of/or a combination of installing latest security updates, changing login manager from LightDM to DGM and back again, removing the ICE/Xauthority and chown user. Current dilemma is my primary admin user privileges were read only. In the command line ls -ls /home/user returned this value: drwx------ 48 username username 20480 I have since changed this using sudo chmod 0755 /home/username (from my limited understanding 755 should return my user privileges to their original read/write glory). ls -ld /home/user currently shows my user privileges as: drwxr-xr-x 48 username username 20480 I still seem to have only read access permissions. I've been through lots of threads (and the help file) that talk about creating new users/groups permissions etc. but specific info on returning my existing global/admin/primary users privileges to what they were when I first created that user - baffling me. I feel this is something really simple I'm just not getting it. Please help! sudo mount /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /proc type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusect1 (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=07pe tmpfs55) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw, ,nosuid,nodev,size=5242880 none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/meng/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=meng) none on /tmp/guest-1R2Fi5 type tmpsf (rw,mode=700)

    Read the article

  • Getting codebaseHQ SVN ChangeLog data in your application

    - by saifkhan
    I deploy apps via ClickOnce. After each deployment we have to review the changes made and send out an email to the users with the changes. What I decided now to do is to use CodebaseHQ’s API to access a project’s SVN repository and display the commit notes so some users who download new updates can check what was changed or updated in an app. This saves a heck of a lot of time, especially when your apps are in beta and you are making several changes daily based on feedback. You can read up on their API here Here is a sample on how to access the Repositories API from a windows app Public Sub GetLog() If String.IsNullOrEmpty(_url) Then Exit Sub Dim answer As String = String.Empty Dim myReq As HttpWebRequest = WebRequest.Create(_url) With myReq .Headers.Add("Authorization", String.Format("Basic {0}", Convert.ToBase64String(Encoding.ASCII.GetBytes("username:password")))) .ContentType = "application/xml" .Accept = "application/xml" .Method = "POST" End With Try Using response As HttpWebResponse = myReq.GetResponse() Using sr As New System.IO.StreamReader(response.GetResponseStream()) answer = sr.ReadToEnd() Dim doc As XDocument = XDocument.Parse(answer) Dim commits = From commit In doc.Descendants("commit") _ Select Message = commit.Element("message").Value, _ AuthorName = commit.Element("author-name").Value, _ AuthoredDate = DateTime.Parse(commit.Element("authored-at").Value).Date grdLogData.BeginUpdate() grdLogData.DataSource = commits.ToList() grdLogData.EndUpdate() End Using End Using Catch ex As Exception MsgBox(ex.Message) End Try End Sub

    Read the article

  • storing data for maps database

    - by Timigen
    I am working on an application that displays choropleth maps. These maps are of all different types, some display state by county, country by state/province, or world by country. How should I handle storing the map information in the database? My Thoughts: I won't need to do queries to find POI inside a region, so I don't think there is a need to use spatial datatypes. I am considering storing a map as a geoJSON object (I am using JS mapping library that accepts geoJSON). The only issue is what if I want a map of the US northeast. Then I would have geoJSON for the US and a separate one for the US northeast, which would be redundant. Would it make sense to have a shape database where I had each state then when I needed a map of the US I could query for each state, and when I needed a map of the US Northeast I could again query for what I need? Note: I am not concerned with storing the data for each region, just the region itself. I will query for the data on the fly for the specific region.

    Read the article

  • Can web apps allow fast data-typists to "type-ahead"?

    - by user61852
    In some data entry contexts, I've seen data typists, type really fast and know so well the app they use, and have a mechanic quality in their work so that they can "type ahead", ie continue typing and "tab-bing" and "enter-ing" faster than the display updates, so that in many occasions they are typing in the data for the next form before it draws itself. Then when this next entry form appears, their keystrokes fill the text boxes and they continue typing, selecting etc. In contexts like this, this speed is desirable, since this persons are really productive. I think this "type ahead of time" is only possible in desktop apps, but I may be wrong. My question is whether this way of handling the keyboard buffer (which in desktop apps require no extra programming) is achievable in web apps, or is this impossible because of the way web apps work, handle sessions, etc (network latency and the overhead of generating new web pages ) ? Edit: By "type ahead" I mean "keyboard type ahead" (typing faster than the next entry form can load), not suggets-as-you-type-like-google type ahead. Typeahead is a feature of computers and software (and some typewriters) that enables users to continue typing regardless of program or computer operation—the user may type in whatever speed he or she desires, and if the receiving software is busy at the time it will be called to handle this later. Often this means that keystrokes entered will not be displayed on the screen immediately. This programming technique for handling user what is known as a keyboard buffer.

    Read the article

  • Radeon 5850 Why am I not getting 3 monitors up as a choice ??

    - by Jan
    Ive just bought the top end ATI Radeon card with 2 normal monitor ports and a HDMI. The idea was to continue using my dual screen setup as always and to use the last plug, the HDMI on my TV. I got a new 52 inch HD TV with all the necessary bits. This should work fine. But.. in Display Properties I still get only my 2 monitors up as options. Not the Digital TV. When I unplug 1 monitor and restart the computer, I get the TV and the other monitor. But never all 3 at the same time. Why is this ? Where can I go to tell it that I need all 3 screens at the same time. Also I get a message saying my gfx card also gives sound through the HDMI cable.. But the TV tells me its recieving a sound format that it does not understand. Any ideas on that too while were at it ?

    Read the article

  • Certain web pages are suddenly not rendering properly in FireFox

    - by LeopardSkinPillBoxHat
    I am using FireFox 3.6.3. I noticed in the last couple of days that several webpages which I visit regularly are not rendering properly. A lot of the text is overlapping with other text and it basically looks like the style sheet is completely screwed up. I have tried disabling all of my Add-Ons and it doesn't make a difference. When I use Coral IE Tab to render the pages using IE they display without any problems. The websites which are not rending properly for me are: The Age Google Reader One interesting thing I noticed is that if I modify the Google Reader URL to not use SSL (i.e. change https to http) it renders without any issues. However, The Age website is not using SSL, and that still doesn't render properly. I have also disabled my Proxy Server (I normally use one at work) but this doesn't make a difference either.

    Read the article

  • TightVNC (or any VNC) viewer windows scaling

    - by mr.b
    Hi, I am currently using TightVNC to connect to multiple remote hosts in LAN. I start 16 VNC viewers, set Scaling by: Auto (in connection options display), and then select all viewer windows and use Tile Horizontally, which covers my entire screen with VNC viewers. It all works sort of nice, except that desktop interaction is really slow when there are more then 4 VNC viewers. My question is, does VNC client (not just TightVNC, but any compatible client) support some kind of smart scaling option, so that client tells server something along the lines of: "Okay, I'm displaying your entire screen in a window size 300x225 px, so can you please start sending encoded images on that resolution?", at which point interactiveness of open connections dramatically increase, and when I decide to go full screen on some connection, client and server re-negotiate and server starts sending full resolution images again? Thanks!!

    Read the article

  • Webmaster Tools, www and no-www, duplicate content and subdomains

    - by Jay
    I have not come to any conclusive answers on the following after many hours of research on many websites to the specific issue that I am trying to figure out. My company has two websites a main one at www.example.com and one at subdomain.example.com which is a subdomain of the first and is our self hosted blog. The way Google sees these with the www or no-www (called naked for now on) is that each of these actually are different when the www or naked version is used/not used in the front of the domain. I completely understand this. It is also advised that both should be set up in the Google Webmaster Tools, which I have done. Correct me if I am wrong on that in regard to having both set up. Now the way it appears is that we can set a preferred domain up in Webmaster Tools only at the root domain level. The subdomain can not have this and actually says the following "Restricted to root level domains only". So it appears that the domain should follow what the root domain says which on our preferred one says to display the www.example.com. and not the naked version. That is one issue I have in that one displays one way and the other displays another. Is it that we have the wrong redirects in place for the subdomain? Another question is does this have any affect on SEO in regards to duplicate content on the web in how we have set this up?

    Read the article

  • Debugging the NetBeans Platform

    - by Geertjan
    Once you've set up the NetBeans Platform sources as your NetBeans Platform, you're able to debug the NetBeans Platform itself. That's an occasional question (certainly not a frequent question) on the mailing list and in NetBeans Platform courses: "Is it possible to debug the NetBeans Platform?" Well, here's how: Firstly, set up the NetBeans Platform sources as your NetBeans Platform. Now, open into NetBeans IDE the NetBeans module where you'd like to place a breakpoint. That in itself is the hardest part of this task. I.e., you know you want to debug the NetBeans Platform, but have no idea where to place your breakpoint. One way to figure that out, from 7.1 onwards, is to take a visual snapshot of the NetBeans Platform and then analyze that snapshot in NetBeans IDE. To do this, right-click a module that you've set as using the NetBeans Platform sources as your NetBeans Platform and then choose Debug. The application, i.e., the NetBeans Platform, including your custom module, starts up and you'll see this, i.e., NetBeans IDE in debug mode together with your NetBeans Platform application:Notice there's a new toolbar button (new in NetBeans IDE 7.1) that resembles an orange camera. Click that button and the IDE creates a visual snapshot of the running application, which in this case is the NetBeans Platform. When you click components in the visual snapshot, the Navigator and Properties window display information about the related GUI component: By clicking the above components, you can end up identifying the component you'd like to debug and even the module where it is found. Open that module. Set a breakpoint on the line of interest. Right-click the module again and choose Debug. A debug session starts and when the breakpoint is hit, the Debugger in the IDE will open and there you can step through the NetBeans Platform sources.

    Read the article

  • Apache, mod_proxy_ajp and IE

    - by eduard-schnittlauch
    Hi! I have an Apache 2.2 using mod_proxy_ajp as a reverse proxy for a Tomcat 6, running on RHEL5. On tomcat runs an application that does NTLM authentication. Using Firefox, everything works ok, but IE7 says "cannot display the web page". Without Apache, IE7 works fine. What is going on here? Unfortunately, I have very limited access rights and can't capture tcp traffic or anything like that. Thanks!

    Read the article

  • Never Miss An Important EMail/SMS With Vibration Notifier App

    - by Gopinath
    Worried about missing important emails/sms/missed calls as your mobile vibrates only once when you are away from mobile? Don’t worry! Vibration Notifier app is there to fix the problem on your Android phones. Author describes the app as “When you have a missed call or an unread SMS, the app keeps vibrating every X minutes for Y times or until you turn on the display of your device.” What is best with this app is that you can tweak as you like. Want your mobile to vibrate repeatedly for missed calls alone? You can just check Missed Calls option and un-check mails and SMS. You don’t want your mobile to vibrate forever? Configure to vibrate 5 times (or any other number) . You can even configure it to vibrate until the screen is unlocked. This looks like a very promising app for Android mobiles but the App is not yet available on Android Market. Developer has posted this app on XDA Developers Forum. Vibration Notifier | via Life Hacker This article titled,Never Miss An Important EMail/SMS With Vibration Notifier App, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

< Previous Page | 732 733 734 735 736 737 738 739 740 741 742 743  | Next Page >