Search Results

Search found 23890 results on 956 pages for 'issue'.

Page 739/956 | < Previous Page | 735 736 737 738 739 740 741 742 743 744 745 746  | Next Page >

• Different behaviour when running exe from command prompt than in windows

  - by valoukh

  Forgive me if I'm not using the correct terminology here but I'll try to explain the issue I'm having as best I can! We use a program that allows you to view video footage from several cameras, and it works in such a way that when it is opened it then automatically loads several video files within its interface. These video files are stored in a subfolder, e.g. "videos\video1.asf", etc. I didn't create the program so I can't say what method it uses to open the files. The files are stored on a network server and are being accessed via a share/UNC path. When the file is run from windows explorer (by navigating to the network share and double-clicking the exe), it works perfectly. When the file is run via the (elevated) command prompt (e.g. by typing the \server\path\to\file.exe) it opens, but the corresponding video files do not load. I am trying to create a script that launches the program via the command prompt, so the first step is finding out why the two actions above have different consequences. Any advice on how running executables from the command prompt could produce a different result would be greatly appreciated. Thanks

  Read the article

• Windows Update broke Wirless driver - Can't get it working again

  - by private_meta

  I naively installed a driver update incoming from Windows Updates yesterday. That caused my Wifi on my Notebook (HP ELitebook 2740p) to break. The network is working as I tried it with my other mobile devices. When installing said driver, it told me that the installation failed. I tried to do a system restore, which did not help getting wifi connectivity back. The device said it was working, but did not get any wifi connection and did not discover any networks. What I tried next was to uninstall the device from my Device Manager and install either the current drivers found through windows, then I tried the same with the current drivers on the HP driver page. both of those attempts failed. It always tells me that installation failed when I uninstall and reinstall drivers. If I try to update the broken driver via internet, it tells me it is up to date, and in the device manager it still views as broken. Next, I 'played' around a bit and reinstalled drivers, and I managed to install drivers from 2012, and when trying to update drivers manually and picking drivers that match the device, it lets me choose between drivers from 2010 and 2014. 2014 would be the current one, picking the 2010 driver leads to the driver being accepted. However, no wireless network can be found. I'm pretty much out of ideas by now, short of reinstalling. The only option I can still think of was that the device broke at the exact moment I installed the new windows driver, but I find that a bit unlikely. Any help would be appreciated fixing this issue.

  Read the article

• No Network Connection in WinXP image from Microsoft running on VirtualBox 3.1.6 OSE (Ubuntu 10.04) due to missing CD Rom

  - by Bevor

  I'd like to test local websites in IE7 and IE8.To do that I thought about using the free Microsoft images: http://www.microsoft.com/windowsxp/using/networking/setup/default.mspx I converted the VHDs to VDIs to make them run in VirtualBox. ( http://www.qc4blog.com/?p=721 ) This works fine. The problem is that in this Windows XP installation there is no Network Adapter configured. Actually nothing at all is configured because it needs the Windows XP CD Rom to do that. If I would have a Windows XP CD Rom, I would not need to run the Microsoft image, so is there some kind of workaround to get an internet connection? Meanwhile I set "bridged" in VirtualBox. But this doesn't help because "ipconfig /all" in the guest system doesn't show any data because nothing is configured. How can I get a connection to my local Apache (Host system). http://localhost would be enough. By the way: I can't install the "Guest additions". When I do that, the 3 days trial period of the guest system is suddenly gone, so I can't use it anymore and it is senseless. Any ideas? Update: I've tried the Vista image and it gets an internet connection. From Vista image I can get to my site with 192.168.1.3/mywebsite in the browser url. So actually I don't care about the WinXP issue anymore but I would be glad if anyone still knows a solution.

  Read the article

• Directory service unavailiable, new hardware same settings

  - by Alex

  I'm working on a project with 2 sites connected by a VPN. Site 1 has the main server and there is a secondary server at site 2 which I am trying to replace. The current setup works perfectly however I can't for the life of me get the replacement server at site 2 up and running. I'm trying to replace like for like just upgraded hardware. I have installed the OS (all Server 2003 Standard SP2) and used exactly the same settings as the old server. I have setup Active Directory, DNS Server, DHCP Server and WINS Server configured. I have used all the same settings as the old server (except IP address and name). I can access the active directory but I can't do anything; add, edit, delete all returns "the directory service is unavaliable". No-one can login on any of the computers on site 2 and the internet is down. Plugging the old server back in and connecting it to the network rectifies the issue (so both new and old are connected at site 2), everyone can login and the internet is back (curious since the modem connects direct to the switch, and even with the new server online I can connect to the router via IP but not the net). I really don't have much experience but I've been roped into doing this because my company is too cheap to hire a real network admin. Any suggestions of where I can start to troubleshoot this, its driving me crazy and I only have a day before all the users are back on site.

  Read the article

• Executing a git command using remote powershell results in a NativeCommmandError

  - by user204777

  I am getting an error while executing a remote PowerShell script. From my local machine I am running a PowerShell script that uses Invoke-Command to cd into a directory on a remote Amazon Windows Server instance, and a subsequent Invoke-Command to execute script that lives on that server instance. The script on the server is trying to git clone a repository from GitHub. I can successfully do things in the server script like "ls" or even "git --version". However git clone, git pull, etc. result in the following error: Cloning into 'MyRepo'... + CategoryInfo : NotSpecified: (Cloning into 'MyRepo'...:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError This is my first time using PowerShell or a Windows Server. Can anyone provide some direction on this problem. The client script: $s = new-pssession -computername $server -credential $user invoke-command -session $s -scriptblock { cd C:\Repos; ls } invoke-command -session $s -scriptblock { param ($repo, $branch) & '.\clone.ps1' -repository $repo -branch $branch} -ArgumentList $repository, $branch exit-pssession The server script: param([string]$repository = "repository", [string]$branch = "branch") git --version start-process -FilePath git -ArgumentList ("clone", "-b $branch https://github.com/MyGithub/$repository.git") -Wait I've changed the server script to use start process and it is no longer throwing the exception. It creates the new repository directory and the .git directory but doesn't write any of the files from the github repository. This smells like a permissions issue. Once again invoking the script manually (remote desktop into the amazon box and execute it from powershell) works like a charm.

  Read the article

• Lenovo Thinkpad T430 not booting from HDD if there is a USB modem connected

  - by user93353

  I have a T430 Levono Thinkpad running Win7. I use a ZTE USB modem (something like this) for my internet connection. I usually keep the modem plugged into the USB drive even when the laptop is shutdown or hibernating. This worked fine on my earlier laptops. But with the Lenovo, my laptop doesn't boot if the modem is in the USB drive. It shows the initial character based screen where it gives the Thinkpad message & BIOS details and then waits. If I pull out the modem, it goes ahead. I have disabled USB as a boot option in my BIOS settings, but even then this happens sometimes (but not all the times). Likewise while resuming from hibernation. The USB modem also has drivers & ISP connection client which getting installed the first time you use it on any machine. I have used multiple laptops (HP, DELL, Acer, Gateway) but never faced this problem before. I have friends who use other Thinkpad models but haven't faced this issue. Any resolutions, workarounds for this?

  Read the article

• Why can I not edit, delete directories inside of this directory

  - by user43053

  Hello there, First, I thought this was PHP related, but maybe it isn't. My original post, which may be irrelevant now is located at the bottom. The problem is I have a directory : /articles/. In it are 10 sub directories. I have been changing the permissions lately, but now it seems all the permissions of the parent folder, sub-folders and files are either chmod 755 or 777. I cannot move, delete or edit files inside of this parent directory or sub-directories with my FTP-client. I can however edit, delete, create new files and directories and change them with PHP-functions without problems. What may the problem be? OLD POST. Ignore everything below this line: If I create a directory with mkdir(), or create a file with fopen(), file_put_contents() or SimpleXMLElement::asXML(), I am unable to access the file with my FTP-client or c-Panel File Manager. If I try to delete or edit them, I get errors. Dreamweaver suggests it is a permission problem or a network or filesystem fault (but I've set the permissions with chmod() to 0777, and when I check the cPanel, it confirms chmod 777. I also tried to use fileowner() and the function returns int(99), the same owner as those files that I could access with my FTP-client. It seems files and directories created with PHP can only be modified or be deleted with PHP. I thought this must be a server setup related issue, so I write it here. I am on a shared server, and I have no idea about setting up servers. EDIT: It seems the problem is different. I cannot move files with FTP-client to the parent, or sub-directories either. This problem may not be PHP related, then. It seems the problem applies to any directory, regardless of whether it was created by PHP. EDIT 2: The parent directory has chmod 755. Thank you for your time. Kind regards Marius

  Read the article

• Toshiba Satellite C665 Rebooting from Standby

  - by Coodu

  I currently am working on a C665 with a strange issue. When the panel is closed the notebook will put itself to sleep in the usual way, and the power LED changes to the pulse to indicate that the device is asleep. However, when the panel is opened to resume using the notebook, the system will restart itself, instead beginning from the Toshiba logo and proceed to boot back in to W7. I should also note that each time this occurs, the "Windows Startup Recovery" option occurs, indicating that the system was not shut down correctly. Some things I have tried: Updated to latest Toshiba BIOS. Returned BIOS settings to their defaults. Swapped Memory to known good module, tested KGM in both memory slots within system. Confirmed that power settings are set to sleep/wake when power button is pressed. Ran a quick HDD fitness test using a parted magic USB stick. Checked for BSOD logs using BlueScreenView, none found. Ran src, no violations found. Any ideas? I have a good feeling the system is restarting itself, but in the event viewer there is a "Kernel Power" error, but it simply says "The system was not shut down correctly." Perhaps a bad driver? I'm not sure. Any advice would be great.

  Read the article

• computer randomly restarting. both in game and out of game

  - by eric

  first my specs are. AMD Phenom II x4 955 processor 3.2ghz 20gb ddr3 ram 4Gb Nvidia Geforce GTX 770 850w Corsair tx850w psu Gigabyte ud3 mobo Windows 7 professional I recently uprgraded my vid card to gtx770 and upgraded my psu to the 850w thats in it now. i did a reformat with the installation of the new gpu and psu and started fresh and only have a couple programs installed (diablo3, nvidia control panel, wow, and steam). all drivers are up to date and everything is hooked up correctly. the problem is it will randomly shut down. no blue screen. just turns itself straight off and reboots after a couple seconds. occasionally i will have to unplug the power cable from the psu for a few minutes then reconnect and it will start up. it seems pretty random. sometimes it does it when my pc is just sitting there on the home screen. and sometimes it does it during games. and sometimes it doesnt do it for days at a time. i noticed the psu felt hot so i put an extra fan blowing straight onto both the psu and gpu and neither feel overly hot after it shuts down now. could it just be that it is a psu problem. the psu was taken from another machine but wasnt having this problem in that machine. i have seen a few articles online about gtx770 doing the same thing. but i havent found any answers or solutions. any help will be appreciated. im sure the 850w is enough to power my machine, im just stumped and ran out of ideas to fix it. i have even returned the video card for another thinking it might have been an issue with that particular card, but still gettin the same problem.

  Read the article

• Local traffic through VPN, global traffic through WAN

  - by ikonoma

  I have an issue with my internet connection. I am using VPN (Aventail Client) to access the local resources. When connected to VPN the Internet traffic passes through it, not through my LAN or Wi-Fi network. I would like to change the routing table to use the Wi-Fi adapter of the PC for WAN traffic. I have routing file, which works very well and routes the traffic in this way, but only when I am physically connected to the local network through LAN. But I can't set it to work with the VPN connection, because I have no gateway when I am connected to it. Etc this in bold is missing. What to do? route change 0.0.0.0 mask 0.0.0.0 172.16.76.1 metric 200 if 12 route change 0.0.0.0 mask 0.0.0.0 10.44.2.1 metric 400 if 11 route add 150.251.0.0 mask 255.255.0.0 10.44.2.1 metric 100 if 11 route add 10.0.0.0 mask 255.0.0.0 10.44.2.1 metric 100 if 11 pause

  Read the article

• different user group can not upload file in the server

  - by Dallal

  I have a CentOS server running in Thailand, and I'm in Canada. The guy at the computer center who set up the server for me doesn't really understand much about linux and left me off an issue to solve myself. I just moved from Mac Server to Linux server, and the first thing I'm facing a problem now is `file name` has failed to upload due to an error The uploaded file could not be moved to `location name` So what happen is that I knew from my experiences of these problem is all about permissions. So I go ahead and checked on my whole folder and found that everything in the folder permission is like myusername mygroupname then I checked the httpd file in the server and it is default to apache apache. My question is that how can I make my user to be in the same group with apache group so that I don't have to have any problem about uploading, changing data in my file....? But without having to affect other user in the same server. I'm holding Administrator account, but not root account, but I can change stuff on the server root no problem. When I was with godaddy.com there never been any problem about the permission and I wish I know how they configure that :(

  Read the article

• Strange 3-second tcp connection latencies (Linux, HTTP)

  - by user25417

  Our webservers with static content are experiencing strange 3 second latencies occasionally. Typically, an ApacheBench run ( 10000 requests, concurrency 1 or 40, no difference, but keepalive off) looks like this: Connection Times (ms) min mean[+/-sd] median max Connect: 2 10 152.8 3 3015 Processing: 2 8 34.7 3 663 Waiting: 2 8 34.7 3 663 Total: 4 19 157.2 6 3222 Percentage of the requests served within a certain time (ms) 50% 6 66% 7 75% 7 80% 7 90% 9 95% 11 98% 223 99% 225 100% 3222 (longest request) I have tried many things: - Apache2 2.2.9 with worker or prefork MPM, no difference (with KeepAliveTimeout 10-15) - Nginx 0.6.32 - various tcp parameters (net.core.somaxconn=3000, net.ipv4.tcp_sack=0, net.ipv4.tcp_dsack=0) - putting the files/DocumentRoot on tmpfs - shorewall on or off (i.e. empty iptables or not) - AllowOverride None is on for /, so no .htaccess checks (verified with strace) - the problem persists whether the webservers are accessed directly or through a Foundry load balancer Kernel is 2.6.32 (Debian Lenny backports), but it occurred with 2.6.26 also. IPv6 is enabled, but not used. Does the issue look familiar to anyone? Help/suggestions are much appreciated. It sounds a bit like a SYN,ACK packet getting lost or ignored.

  Read the article

• Excel 2010 - more than 1 calculation within an IF() statement

  - by Da Bajan

  I have a situation where I need to calculate shipping values based on the length of the supply chain. Easy, however I need to have instances where an increased amount is required based on specific date criteria. My example is as follows: Shipvalue = 100 Date1 = 1/1/2013 (Jan) - ship 50% more than usual Date2 = 2/1/2013 (Feb) - ship 25% more than usual Date3 = 3/1/2013 (Mar) - ship 25% more than usual Supply chain length is: June - October 100 days November - March 140 days April - June 100 days The issue I have is that as there is an increase in the number of days, my formula: IF( Date1-(Supply chain length + any extra days)=today's date, shipvalue+(shipvalue X 50%), IF( Date2-(Supply chain length + any extra days)=today's date, shipvalue+(shipvalue x 50%) IF( Date2-(Supply chain length + any extra days)=today's date, shipvalue+(shipvalue x 50%), IF( preceding cell<>0,shipvalue, 0) ) ) ) Now the problem with this is that if the length of the supply chain increases then the formula misses all but the 1st increase. So, I thought of adding a variable that would be incremented and checked every time you made an increased shipping amount. So, how do I do both the calculation for the increased shipping value, and set the variable in one part of the IF statement?

  Read the article

• Can't upgrade MySQL Server on new Ubuntu 12.04 install

  - by user179627

  After freshly installing Ubuntu server 12.04, I did the usual apt-get update / apt-get upgrade, which failed for mysql-server-5.5: Setting up mysql-server-5.5 (5.5.31-0ubuntu0.12.04.2) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured I tried a wide variety a approaches suggested by googling, which involved various combinations of apt-get remove/purge/install -f/reinstall, etc., with no luck. I also tried downloading the package directly from launchpad.net and running dpkg -i on it (this had worked for a similar issue with a kernel upgrade), but to no avail. I'm not actually particularly interested in what's going on with mysql, per se (though I will need to figure it out at some time); at this point, my primary concern is that I am unable to apt-get install other packages! What to do?

  Read the article

• Linux Has Become Very Slow Dealing With Large Data

  - by Kohjah Breese

  Last year I bought a computer, for around $1,800, so it is relatively high-end. When I first got it I was particularly pleased at how quick it dealt with large MySQL queries, imports and exports. But somewhere along the way something has gone wrong and I am not sure how to diagnose the problem. Any job that involves processing large amounts of data, e.g. gzipping file c. 1GB+, UPDATEs on large MySQL tables etc. have become very slow. I just performed an intensive alter statement on a 240,000,000 row table on a remote server, which is lower spec. This took about 10 minutes. However, performing the same query on a 167,000,000 row table on my computer went fine until it hit 860MB. Now it is only writing about 1MB every 15 seconds. Does anyone have any advice as to debugging what the issue is? I am using LinuxMint (based on Ubuntu 12.04.) The home partition is encrypted, which really slows down gzip. I have noticed the swap is barely used, but am not sure if that is because there is more than enough RAM. The filesystem is ext4. The MySQL server is on a separate hard drive, but it was fine when I first installed it. Other than the above issues, there are no other problems with it. I am going to install a fresh Ubuntu on the 4th hard drive to see if that is any different.

  Read the article

• Trying to migrate old server to new. Getting duplicate name errors

  - by SpaceCowboy74

  I have an existing server on my network that is running under windows 2000 with SQL Server 2000 on it. We are in the process of moving the server to a windows 2008 platform, with SQL 2008 as well. A few changes are happening though. For one, applications that were on the old server, will now be on a new application server. The issue is, the developers of the original applications hard coded the server name in the apps and/or batch files. I could change all the code, but that would require weeks of work. My original idea was to change the hosts and lmhosts files to point to the new servers with a different IP. So i implemented the following where oldserver was the original server and server is the new one brought online: hosts: 192.168.1.10 oldserver 192.168.1.15 server lmhosts: 192.168.1.10 oldserver #pre 192.168.1.15 server #pre Problem is, when i try to do this, i get the following errors: \\server\c$ Logon Failure : The target account name is incorrect. and \\oldserver\c$ A duplicate name exists on the network. I know about renaming servers in AD, but can't do so yet as the original server is in production and i cannot rename it without breaking a lot of things at the moment. I'm wanting to do a proof of concept to the management before renaming the servers. Any idea how i should resolve this?

  Read the article

• EXCEL 2007 macro

  - by Binay

  I have a macro which connects to db and fetches data for me and makes it comma separated. But the problem is the comma is getting appended to the last row, which I don't want. I'm struggling here. Could you please help out? Here is the part from the code. If cn.State = adStateOpen Then Rec_set.Open "SELECT concat(trim(Columns_0.ColumnName), ' ','(', 'varchar(2000)' ,')') columnname FROM DBC.Columns Columns_0 WHERE (Columns_0.TableName= " & Chr(39) & Tablename & Chr(39) & "and Columns_0.Databasename=" & Chr(39) & db & Chr(39) & ")ORDER BY Columns_0.Columnid;", cn 'Issue SQL statement If Not Rec_set.EOF And Not Rec_set.EOF Then Do Until Rec_set.EOF For i = 0 To Rec_set.Fields.Count - 1 strString = strString & Rec_set(i) & "," Next strFile.WriteLine (strString) strString = "" Rec_set.MoveNext Loop Here is the result I am getting. EMPNO (varchar(2000)), ENAME (varchar(2000)), JOB (varchar(2000)), MGR (varchar(2000)), HIREDATE (varchar(2000)), SAL (varchar(2000)), COMM (varchar(2000)), DEPTNO (varchar(2000)), I don't want the last comma.

  Read the article

• How to upgrade iPhone 3G to iOS 5 now that iOS 6 is out? [closed]

  - by mmmshuddup

  My friend has an old iPhone 3G and I wanted to upgrade it to iOS 5 because I had read that the performance is actually better with iOS 5 on that phone in spite of the difference in processor power. The problem is that now that iOS 6 is out, iTunes only gives me the option to upgrade to that. I am a little more leery of iOS 6 knowing that it was launched mostly for the iPhone 5 and since that phone has a way faster processor, I would assume that performance would be an issue on the iPhone 3G. How can I, if possible, upgrade just to iOS 5? Note: I would like to avoid having to jailbreak the phone by all means possible. (It's not mine and I don't want to take the risk with a phone that doesn't belong to me.) EDIT: If anyone knows of a good site to get help on questions like this let me know. Apparently you're allowed to ask questions about iPhones here, just not this. Which is completely utter asinine, but oh well. Anyone with helpful ideas, post in the comments please.

  Read the article

• What can cause the system to freeze in a way where even the reset button takes a long time to react?

  - by ThiefMaster

  What can be the reason for system freezes that are so "hard" that even the hardware reset button takes about 3 seconds until it actually resets the system (and then it actually powers down and up again instead of doing a "clean" hard reset like when pressing it during a normally running system). Since it initially happened mainly while playing videos from YouTube I suspected the graphics card - however, I replaced it recently and it did not change it. It still happens from time to time (and sometimes more often, like a few times times in the last few hours). The system is running Windows 7 - but I don't think this matters since I don't think any software, not even the OS, can actually affect the reset button's behaviour. The PC is not overheated and the freezes happen randomly. There is also no malware on the system. The CPU is an Intel Core i7-920 on a Gigabyte EX58-UD5 mainboard. What could be the cause for this problem? Faulty RAM? I did not run a full memtest86 check yet, but I wonder if there is a more likely issue than faulty RAM - checking 12G of ram does take some time after all! There are no entries in the event log - but that's what I expected since the system freezes so hard that I doubt it has time to write anything to any log.

  Read the article

• Powerpoint not drawing in slide properly...

  - by commradepolski

  So got another issue to post about. I have a user here who uses powerpoint a lot, Office 07 with SP2. When he opens up the presentation, powerpoint opens fine without errors, but does not draw in the main slide properly. So to better explain that, the list on the left hand side, that shows the slides and what order they are in, loads up fine. You can see the slides and the content etc. When you click on a slide, to edit it, it does not draw in on the editing screen. Not really sure how to explain that. The screen where the work on the slide is done, is what is affected. This is a screen shot from my pc not the users. So instead of the screen saying "Click to add title" it would be improperly drawn such that if I were to drag an explorer window across it, it would leave a trail. I have tried reinstalling office, updating it, as well as giving the user a new windows image and nothing has helped. Any help or advice is appreciated.

  Read the article

• mysqld - master to slave replication using rsync innodb, sequence number issues

  - by Luis

  I've read several of the related topics posted here, but I have not been able to avoid this innodb error. The steps I've taken to replicate data from a Slackware server - 5.5.27-log (S) to a FreeBSD slave - 5.5.21-log (F) were these: (S) flush tables with read lock; (S) in another terminal show master status; (S) stop mysqld via command line in third terminal; (F) while both servers are stopped, rsync mysql datadir from (S), excluding master.info, mysql-bin and relay-* files; (F) start mysqld (skip-slave) 121018 12:03:29 InnoDB: Error: page 7 log sequence number 456388912904 InnoDB: is in the future! Current system log sequence number 453905468629. InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: for more information. This kind of error happens for a lot of tables. I know I can use dump, but the database is large, ca. 70GB and the systems are slow (old), so would like to get this replication to work with data transfer. What should I try to solve this issue?

  Read the article

• Proper Rules For SSL Redirect For Subdomains

  - by Zac Cleaves

  RewriteCond %{HTTP_HOST} ^(.*\.)*subexample.example.com$ [NC] RewriteCond %{SERVER_PORT} !^443$ RewriteRule ^(.*)$ https://subexample.example.com/$1 [R] Is what I have been using. It works as long as I go to a specific page, like subexample.example.com/orders.php. But if you try to go to the root of the subdomain, it adds the extra "/example" at the end. Any suggestion on a set of rules that will work? Thank you so much for your responces! Actually, this is what I am trying to do: http://support.mydomain.net >> https://support.mydomain.net AND(!) http://support.mydomain.net/anypage* >> https://support.mydomain.net/anypage* > RewriteCond %{HTTPS} off RewriteRule (.*) > https://%{HTTP_HOST}%{REQUEST_URI} Works, except I need it to only do it for the support.mydomain.net With the above set up, you get a certificate warning if you try to go just mydomain.net, which I do not have or need an SSL certificate installed on. UPDATE! The other issue with the rule I have written above, is that if you try to go to the root of the subdomain (i.e. support.mydomain.net) it goes to https://support.mydomain.net/support This is driving me crazy, help! =) Any help would be greatly appreciated!

  Read the article

• Website is not accessible from server which is using proxy

  - by Bhoot

  I hosted a website in a win 2008 R2 server which runs in private domain. I set up bindings for port 80 and 443 for http & https respectively. Created inbound rule for port 80 and 443 also in windows firewall. After doing all this, i am still not able to access my website from remote machine. IE : Internet Explorer cannot display the webpage. Chrome : Oops! Google Chrome could not find xxxxxx Tried accessing website by ip address but no luck. I tried to ping that server but it says TTL expired in Transit. Now i found some more information over internet to check if the server is using any kind of proxy in between. I found my IP address at www.getip.com, but ipconfig/all gives me a different IP address. Is it really a problem if we use proxy ? I am not sure if i have concluded it correctly. But is there any way out to resolve this issue? Update ::: I figured it out. I have to call that website with external IP address. due to the proxy settings i was not able to call that website by the server's IP or name of that machine.

  Read the article

• Question marks showing in ls of directory. IO errors too.

  - by jaymoo

  Has anyone seen this before? I've got a raid 5 mounted on my server and for whatever reason it started showing this: jason@box2:/mnt/raid1/cra$ ls -alh ls: cannot access e6eacc985fea729b2d5bc74078632738: Input/output error ls: cannot access 257ad35ee0b12a714530c30dccf9210f: Input/output error total 0 drwxr-xr-x 5 root root 123 2009-08-19 16:33 . drwxr-xr-x 3 root root 16 2009-08-14 17:15 .. ?????????? ? ? ? ? ? 257ad35ee0b12a714530c30dccf9210f drwxr-xr-x 3 root root 57 2009-08-19 16:58 9c89a78e93ae6738e01136db9153361b ?????????? ? ? ? ? ? e6eacc985fea729b2d5bc74078632738 The md5 strings are actual directory names and not part of the error. The question marks are odd, and any directory with a question mark throws an io error when you attempt to use/delete/etc it. I was unable to umount the drive due to "busy". Rebooting the server "fixed" it but it was throwing some raid errors on shutdown. I have configured two raid 5 arrays and both started doing this on random files. Both are using the following config: mkfs.xfs -l size=128m -d agcount=32 mount -t xfs -o noatime,logbufs=8 Nothing too fancy, but part of an optimized config for this box. We're not partitioning the drives and that was suggested as a possible issue. Could this be the culprit?

  Read the article

• VMware ESX Linux Guest Customization

  - by andyh_ky

  Hello, I am interested in deploying several RHEL 4 Update 8 virtual machines for creation of a test environment. Here are the steps I am taking: In off hours, P2V/V2V the production machines and convert them to templates Deploy the virtual machines with a customization specification that changes hostname, IP address I am interested in how these processes are done and if there are any options for further customization. Are the machines brought on the network when they are powered on, before they are reconfigured? Is there a potential IP address conflict? Is there an option to run additional scripts which reside on the guest as a part of the reconfiguration? For example, restoring an Oracle Database. This is an option with Windows guests and sysprep, but I have been unable to locate anything showing a RHEL equivalent. I am dealing with a multi tier application. The main issue I am attempting to mitigate is that the application servers reference database servers by hostname and in tnsnames files. I am interested in scripting the reconfiguration of the application in the deployment so that the app/db servers are pointing to the test environment. I am OK with placing the 'cleanup' script on the source and executing it after the machine has been brought up. I am interested in the automation of the script's execution post clone/boot, as well as if there could be an IP address conflict. (cross posted to VMTN's ESX 4 community)

  Read the article

< Previous Page | 735 736 737 738 739 740 741 742 743 744 745 746  | Next Page >