Search Results

Search found 35444 results on 1418 pages for 'lock down computer'.

Page 74/1418 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• IPtables Traffic Quota - up and down

  - by Nick

  I've been trying to set up traffic quotas for users on a shared server and i believe [with my limited knowledge] that iptables --quota and ports which have been selected for each user [--dport] is the way to do this... iptables -A OUTPUT --dport 1,2,3,4... --quota 123412341234 -j ACCEPT iptables -A OUTPUT --dport 1,2,3,4... -j DROP I think something like this would work to limit the traffic [and reset every month] but its only for traffic going out. Is there something I could do to combine -A OUTPUT and -A INPUT into one quota? Or, is there a different method I could use to achieve the same thing more efficiently? OS is debian squeeze Thanks.

  Read the article

• Active Directory Profile Slows down machine

  - by boburob

  I have a strange issue with an Active Directory profile. When the user logs onto a machine with his profile, the whole machine becomes incredibly slow and unresponsive, with programs hanging and taking an age to load everything. If I log into the same machine with any other profile nothing happens. I took a look at his original profile, any start up programs, login scripts, etc and could not see what could be causing this. The machine is not running out of memory or CPU. Nothing strange is appearing in the event log and I can see nothing running under his profile which may cause this. So I created the user a new profile to test this on and exactly the same thing happens on the first login. The only thing which would of been carried across is the security groups the user is assigned to, yet I have other users with the same groups who do not experience these issues so I am now at a complete loss on where to go next!

  Read the article

• Using Computer name in URL causes issues when connecting to Web Services

  - by AWinters

  The set of applications I work on all access the same 8 or so web services that we have. These services and applications all reside on the same box and all use the computer name when trying to connect to the web service. For Example: If I have a web service called MapDataService and I have an application that accesses it, it would access it by the URL: http://COMPUTERNAME/MapDataService/MapDataService.asmx. This works in most of the applications that access the web service. However, we have several applications that, when using the computer name in the URL, will not get data returned from the service (actually a 503 is returned). In order to get it to work, the IP address of the system needs to be used in place of the COMPUTERNAME. This strikes me as very odd considering, as I mentioned before, all applications and services are on the same box and most other applications usr the COMPUTERNAME with no issues. Can someone give me some insight as to what could be causing this? We have no access to IIS logs and what logs we did get (this is on a customer site) are not very useful.

  Read the article

• Windows XP: How to delete files that cannot be deleted?

  - by glenneroo

  I have a backup copy of my previous Documents and Settings folder which only contains my original user and within that, 2 directories (Favorites and Local Settings) which are visible in cmd shell but when I try to delete them, Windows gives me this error: If I try to delete the Documents and Settings folder, I receive this warning: I tried doing this in a cmd shell: attrib *.* -r -a -s -h /s But it did not help, nor did it return any errors/warnings. Unlocker 1.8.5 returns: No Locking handle found. Any ideas?

  Read the article

• Win7 'locking' process/files/folders?

  - by Dynde

  I've had a fair bit problems with sometimes files/folders/processes being 'locked' by Windows. The weird thing is, it's not like the traditional sense, I think, where tools like UnlockIT and wholockme would work. It seems that just giving it a little often helps - making me think it could either be the HDD, the memory, or something in Windows. A scenario: I go into a folder - don't open anything at all, go back up, cut or drag-move the folder to someplace else, it says "Action can't be completed because the folder or a file in it is open in another program". Waiting sometimes 20 seconds sometimes a little longer, and I can move it. Another scenario is deleting a bunch of files in a folder, and it appears that everything is gone, but then suddenly after a few seconds an .exe file pops back up, and I can't delete it. Waiting a few minutes, then pressing refresh and it's gone. I have the strangest feeling that there's a problem with either HDD or memory. I already tried disabling Windows indexing service with no luck. Does anyone have any ideas? EDIT: I should say, that I have a very fast system, 16 GB DDR3 RAM, i7-2600k CPU, SSD main HDD, so I really should not be experiencing any sort of problems, where one might say that it's "reasonable" for the system not to respond right away. Edit2: And I updated SSD firmware a couple months ago, so it shouldn't be bad release FW either

  Read the article

• How do I check to see if an apt lock file is locked?

  - by gondoi

  I am writing a script to do some apt commands, but I am running into potential issues of the apt/dpkg databases being locked so my script bails. I want to check the lock files (i.e. /var/lib/dpkg/lock) before doing anything just like apt does when it runs it's command, but I can't figure out how apt is performing the lock. The lock file is always there, and apt-get is not doing a flock on the file. How else would it be checking to see if it is in use? From an strace I see that apt-get opens the file, but that is it. In my script, I can open the file while apt-get has it open as well.

  Read the article

• How to show "switch user" screen after Windows-L?

  - by tputkonen

  When one locks the PC using Windows-L it activates a screen which shows account name and the text 'Locked'. There is also a "Switch User" button which open user selection screen. What I would like to, is show directly the user selection screen when one locks the PC. This was easy to do with XP but how can it be achieved on Seven?

  Read the article

• daily rsync backups with hard links, checksums, and a new computer

  - by user75058

  I backup my laptop to a Fedora desktop daily using rsync with hard links. This has worked great for almost a year. I recently purchased a new computer, transferred over my data, and would like to continue backing up this computer daily. However, due to the data transfer from the old laptop to the new laptop, the timestamps have obviously changed, and will thus cause my daily rsync backup to re-transfer all of the data. I thought that by adding the -c (checksum) switch to my rsync backup it would match files based on checksum, instead of timestamp and size, and only transfer those files that are different or not present. This appeared to work, but upon examining the new backup, hard links are not being created, and it appears the files that should be hard linked are simply being copied to the new backup directory from the previous backup directory on the backup server. This is very peculiar behavior to me, and I am having trouble figuring out why this is occurring. Checksums match for files that I think should be hard linked. I have looked through the rsync man page and Google'd around a bit and have been unable to find anything for me to better understand this behavior.

  Read the article

• Stop Windows 7 from forcefully shutting itself down when waiting to update

  - by Kenneth

  I have had this happen to me twice now. I'll be in the middle of working on something that has resulted in me not rebooting my machine for several days. If Windows 7 is waiting to install updates it'll eventually get to a point where it forces a restart to install the updates. The problem is that it doesn't notify me or tell me that its going to do this and I've lost work as a result and most recently had a VM become corrupt and unusable. Is there a way to at least get it to prompt me before doing this? It used to...

  Read the article

• Power up and down computers on a timer

  - by Scott Weinstein

  I've got a windows home server that's just great for backups and the like, but I'd like to reduce my power consumption. What the best way to put it on a timer, say wake up daily at 6pm and shutdown if activity is less than 3% at 1am?

  Read the article

• shut down FTP from IIS 6 after <X> failed login attempts

  - by Justin C

  Is there a setting in IIS 6 to turn an FTP site off after a specified number of failed login attempts? It has already been documented on this site that a Windows server sitting on a static IP address can record tens of thousands of failed login attempts a month. One server I maintain has had tens of thousands of attempts made against the FTP port. I have solid passwords in place, so I am not overly concerned. I rarely have to use the FTP, so for the most part I turn it on and off as I need it. Sometimes though I forget to turn it off when I am done, only to find the next day that my EventLog is full of audit failures. I would want to set a high number, in case I just messed up the password. Something like if 50 failed login attempts happen, just turn off the FTP site. Then if I need it later I can just start it again.

  Read the article

• How can I change the lock screen in Windows 8 that appears for the default user?

  - by Mark Allen

  This is about Windows 8 RTM. How can I change the lock screen in Windows 8 that appears after connecting to the machine via RDP? You can change your lock screen for your user account like so: Hit the Windows key. Right click your user name in the upper right hand corner, choose Change Account Picture. Click Lock Screen, choose a new picture. However, if you then connect to the computer where you've done this from another computer via RDP, using the same account, the physical machine you've connected to will display the "default" user lock screen - a stylized Space Needle / Seattle picture. It's not a bad picture, but I'd like to change it.

  Read the article

• Computer making strange sound when turned on, ever since power outage

  - by Dot NET

  Recently we experienced a power outage, and the PC was off. However, once the power came back, I switched on the PC and heard a strange noise - almost as if the hard disk or fans were struggling to work. I can't really describe the sound, but it's a laboured, loud sound almost like a jack-hammer. This has been persisting ever since the power outage, however the noise stops after around 10 minutes or so, and doesn't start again until the computer is turned off and on again. At first I thought it had something to do with the HDD, but all my files are intact, chkdsk did not report any issues and performance is 100% unchanged, even in games (so the gfx card is fine, and so is the HDD most likely). My PC setup basically has around 3 cooling fans, but I'm not sure if it's one of these either as the noise actually stops after 10 minutes or so, and if I leave the PC on for 4 hours (for example) the noise never starts again. It's there solely when turning on the PC. I haven't got a UPS, and it's important to note that the computer was not on when the power went out - it was merely plugged in. I then promptly unplugged the PC once the power was out, and only plugged it in again when the power came back. Could it be the power supply? Unfortunately I can't open my tower as I would void the warranty. Are there any tests which I could carry out without voiding the warranty?

  Read the article

• Esxi with iSCSI SAN slows down with many multiple VMs running

  - by varesa

  I have a server with ESXi 5 and iSCSI attached network storage(4x1Tb Raid-Z on freenas). Those two machines are connected to each other with Gigabit ethernet, and a procurve switch in between. After a while, if I have many(4-5 or more) vms running, they start to get un-responsive (long delays before anything happens). We are trying to find the reason behind this. Today we looked at esxtop, and found that DAVG of that iSCSI LUN stays at 70-80. I read that +30 is critical! What could be causing those high response-times?

  Read the article

• computer freezes but music continues

  - by Danny

  Recently I have had a problem where my computer will freeze completely but if I happen to be streaming Pandora in a tab that will continue playing. If I wait about 2-5 minutes it will eventually come back and start working normally. I also noticed that during the period that it is unresponsive that the HDD activity light stays lit the whole time, not flashing. I've ran memtest86+ and a diagnostic from Western Digital for my HDD model and none of them reported any errors. The specs for my computer are 1 x ASRock H55M/USB3 R2.0 LGA 1156 Intel H55 HDMI USB 3.0 Micro ATX Intel Motherboard 1 x CORSAIR Enthusiast Series CMPSU-550VX 550W ATX12V V2.2 SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply 1 x Intel Core i3-540 Clarkdale 3.06GHz LGA 1156 73W Dual-Core Desktop Processor Intel HD Graphics BX80616I3540 1 x G.SKILL 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Dual Channel Kit Desktop Memory Model F3-12800CL9D-4GBNQ 1 x ASUS PCE-N13 PCI Express 150/300Mbps Transfer/Receive Rate Wireless Adapter 1 x EVGA 01G-P3-1556-KR GeForce GTX 550 Ti (Fermi) FPB 1GB 192-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card I can't imagine what would be causing these problems.

  Read the article

• Excel cutting out down over 1024 characters

  - by Zeno

  I am using Excel 2003 to save a large file as a CSV. But when saving cells that contain over 1024 characters, it cuts out the characters beyond 1024. Per a previous question, I am using this official macro to save: http://support.microsoft.com/default.aspx?scid=kb;en-us;291296&Product=xlw This macro in question is probably causing it, since I'm not using the normal Save As (in order to put quotes around every field). It may not be 1024 characters, but long cells are getting cut off. What in this macro is causing that?

  Read the article

• Blackberry Access to Powered Down Exchange

  - by Sam Cogan

  I work with a company (it's more of a charity really) who have a single Exchange Server, with a few Blackberry users, who download emails via POP3 or IMAP. They are in a developing country and so every night they turn off the Exchange server to save power. However, they now want the Blackberry users to be able to get mail at night. They have a Linux server (a rented VPS), so they are considering having the mail delivered here and then pulling this mail via a POP connector into Exchange. Therefore at night, the BES users (who will now be pulling their POP email from the Linux server) can still get their mail. Can anyone think of a better solution to this problem that I may have missed? Unfortunately there is no convincing the company to leave the machine on overnight.

  Read the article

• cannot permanently shut down java.exe in windows vista

  - by gasga

  java.exe is always running even though i am not running any java program it uses lot of memory and CPU 50% all the time everytime i close it in taskmgr, it restarts again!!!

  Read the article

• Failing SSHFS connection drags down the system

  - by skerit

  From time to time my sshfs mount fails. All programs using the mount freeze when it happens. I can't even ls anything or use nautilus. Is there a way to find out what's the cause and how to handle it? I've noticed regular SSH sessions to the server get their fair share of Write failed: broken pipe disconnects, too. If I wait long enough (and I'm talking about 20-ish minutes, here) it will auto reconnect and things start working again.

  Read the article

• Powershell Get-Process cannot connect to remote computer

  - by amandion

  I've been struggling with this for a few hours and can't figure this out. I have two Windows 7 computers. One is my workstation that is using Powershell to do administrative maintenance. The other is the machine I'd like to use Powershell remoting on to execute remote Powershell cmdlets on. On both computers, I've enabled Powershell remoting and added all computers to TrustedHosts with the * value. On the remote computer, I've started the Remote registry service and ensured that the DCOM, Winmgmt and the Winrm services are running. Firewall is disabled on remote machine too. The cmdlet I try to run is: Get-Process -ComputerName $name Where $name is the name of the remote machine. I keep getting an error saying that it could not connect to the remote PC. I've also tried using the IP and I get the same error. These PCs are not in a domain. I am able to do the following successfully: Invoke-Command {get-Process} -ComputerName $name -Credential $creds Where $name is the machine name and $creds is the user name and password for the remote computer's local Admin account. This gives me the same output I would expect. While this is an acceptable workaround, I am curious, why doesn't using get-process with remoting work as it should? I've seen a few articles on the web suggesting people have had success with it on its own. Each time I am using Powershell on my workstation with elevated privileges. Any ideas?

  Read the article

• Microsoft Loopback Adapter not listed under network adaptes drop down list

  - by assocom

  I have installed a Microsoft Loopback Adapter on my Windows 7 Machine Under settings of my Windows XP mode virtual machine the Microsoft Loopback adapter is not listed under my network adapters. Can anyone maybe advise what I am missing here?

  Read the article

• using trickle to slow down browser

  - by tester

  according to trickle's man page, http://linux.die.net/man/1/trickle i can limit the download speed of a process, e.g. trickle -u 10 -d 20 ncftp to Launch ncftp(1) limiting its upload capacity to 10 KB/s, and download capacity at 20 KB/s. how would I go about limiting google-chrome or firefox with trickle? Edit: For those of you asking why I asked such an obvious question, I tried trickle -u 10 -d 20 firefox and I'm getting an error trickle: Could not reach trickled, working independently: No such file or directory firefox opens right after, but is definitely not rate limited...

  Read the article

• Computer will not boot - disk read error - cannot boot from HD or DVD

  - by Grant Palin

  This is a 3 year-old system: HP a1640n. There have been no issues with it in the past. I added a video card 2 years ago, and more memory 1 year ago, both without issues. There haven't been any recent hardware changes. I did install Win7 in Oct., but there were no issues with that either. I used the computer fine two nights ago, and turned it off. Yesterday, I tried to turn it on, and got the error: "A Disk Read Error Occurred. Press CTRL ALT DEL to restart" So I restart, see the initial start screen (HP) and enter the BIOS. The hard drive and dvd drive appear to be listed, but the names are gibberish text. I tried putting a Windows disk in the dvd drive, and continued with the boot, but the disk did not get recognized. Even though the BIOS was set to check for optical media before the hard drive. Back to the error screen. If the computer would boot from a cd or dvd, I would just figure the hard drive needed replacing. But both being problematic worries me. Is this a matter of replacing both the hard drive and dvd drive, or might it be an indication of a bigger problem? Thanks for any advice.

  Read the article

• How to avoid Remove-Item PowerShell errors "process cannot access the file"?

  - by Michael Freidgeim

  We are using TfsDeployer and PowerShell script to remove the folders ising Remove-Item before deployment of a new version. Sometimes the PS script failed with the error Remove-Item : Cannot remove item Services\bin: The process cannot access the file Services\bin' because it is being used by another proc Get-ChildItem -Path $Destination -Recurse | Remove-Item <<<< -force -recurse + CategoryInfo : WriteError: (C:\Program File..\Services\bin:DirectoryInfo) [Remove-Item], IOException FullyQualifiedErrorId : RemoveFileSystemItemIOError,Microsoft.PowerShell.Commands.RemoveItemCommand I’ve tried to follow the answer from PowerShell remove force to pipe get-childitem -recurse into remove-item. get-childitem * -include *.csv -recurse | remove-item ,but the error still happens periodically. We are using unlocker to manually kill locking application, (it’s usually w3wp), but I prefer to find automated solution. Another (not ideal) option is to-suppress-powershell-errors get-childitem -recurse -force -erroraction silentlycontinue Any suggestions are welcome.

  Read the article

• Kubuntu guest on Windows 8.1 Hyper-V won't shut down completely

  - by DarkMoon

  I've got a Windows 8.1 Professional laptop with Hyper-V installed, and a Kubuntu 14.04 Desktop VM. When I shutdown the Kubuntu VM, most of the time it gets to the logo screen, and just sits there. It's not frozen, because I can see the glow around the logo brighten and fade. I have installed the four Hyper-V modules, and lsmod shows them all running fine before the shutdown. Also, once it's stuck on the logo screen, if I send a CTL-ALT-DEL to the VM, it restarts immediately. Does anyone have any idea where I'd begin troubleshooting this? UPDATE: I've disabled the startup and shutdown screens, and now can see this output when it's stopped. Hopefully this sheds more light on the problem.

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >