Search Results

Search found 21563 results on 863 pages for 'game testing'.

Page 742/863 | < Previous Page | 738 739 740 741 742 743 744 745 746 747 748 749  | Next Page >

• Driver denied access to PCI card

  - by Corin

  Alright, I asked this on StackOverflow (here) and they suggested trying ServerFault to get help on permissions. So here's the deal. We designed a custom PCI card and wrote the driver for it. It's been working for years without problems but now we encountered one particular installation were it doesn't work. The problem is that we cannot connect to the PCI to begin communication with it. We tried replacing the card and had the same problem. We had the motherboard replaced thinking the PCI slots were bad. That didn't help either. We tried the cards in a different computer and they all worked. So it seemed to be something specific to the computer. The Windows Device Manager indicates the device is working properly and seems to have all the correct driver info. We now have this troublesome computer back at the office for testing. With the help of some extra debug info in the driver we determined that we cannot connect because access is denied. Sounds like a permissions issue to me. I should note that we are logged into the system as a local administrator. So what configuration option in Windows can prevent access to a device?

  Read the article

• Graphics Artifacts/ Texture Flickering

  - by Cerin

  Hey I been having some problems with artifacts in games. Sometimes textures flicker. Artifacts of various shapes and sizes show up usually after a couple games of dota 2. I built my computer almost exactly one month ago and it has been doing this pretty much from the start except before the artifacts I believe just flashed on screen fast enough to where I couldn't tell what it was but I still noticed. In dota I've seen green triangular artifacts among other things. I've tried running Furmark for a while but even though it pushes the gpu much harder than dota 2, there are still no artifacts. It maxes in furmark at about 60C and running every game I've tried on it at 40C. CPU and system temp don't usually get higher than 40C either. These are my system specs: Gigabyte Z68 Intel Motherboard 16 GB Gskill Ripjaws SDRAM DDR3 Sapphire Radeon HD 7770 GHz edition Intel Core i5-2500k (with built in gpu) Corsair 750 Watt PSU windows 7-64 bit I have the latest drivers for everything. What should I do about this? Try to RMA my graphics card? Are there other things that could be causing this?

  Read the article

• Delegating account unlock rights in AD

  - by ewall

  I'm trying to delegate the rights to unlock user accounts in our Active Directory domain. This should be easy, and I've done it before... but every time the user tries to unlock an account (using the LockoutStatus tool), he gets denied with the error "You do not have the necessary permissions to unlock this account." Here's what I've done: I created a domain local group and added the members who should have the rights. This was created over a week ago, so the users have logged out and in again. In ADUC, I've used the Delegate Rights wizard on the OU which contains our user accounts to grant permissions to Read lockoutTime and Writer lockoutTime to the group, per MSKB 279723 I have double-checked the permissions were applied correctly in ADSIEdit. I have forced replication between all domain controllers to ensure the permission changes were copied over. The user testing it has logged out and in again to ensure he has any changes applied to his account. ...That covers all the bases I can think of. Anything else I could be missing?

  Read the article

• Why do I need to set up Autologon values in registry twice before it works and can i fix this?

  - by jJack

  Background: As part an automated testing suite I am building, I need to set up Autologon on my virtual machines 'on demand'. By on demand, I mean that I don't want to necessarily pre-configure my VM or any snapshot to have Autologon set up already, for security reasons and also a huge business case. My solution so far: I'm copying a script to the guest machine and then using Sysinternals PsExec to execute it. The script is: reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultUserName /t REG_SZ /d myusername reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultPassword /t REG_SZ /d myfakepassword reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultDomainName /t REG_SZ /d mydomain reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v ForceAutoLogon /t REG_SZ /d 1 reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v AutoAdminLogon /t REG_SZ /d 1 reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\AutoLogonChecked" /f /ve /d 1 Note: I don't believe AutoLogonChecked is required for machines post Windows 2000 but I'm doing it just in case for now. Maybe ForceAutoLogon isn't either, not sure yet. The Problem: I see PsExec executes this properly and all the values are in the registry, however when I restart the machine, the user isn't automatically logged on...When I run this a second time then restart the machine, the user is finally logged on. A diff between the registry states shows that the first time I run this, it is missing both the "1" for AutoAdminLogon, and also the DefaultPassword key. The second time I execute it, these values are correctly intact as I intended. So, what is going on here? Is this expected? This post claims in the end that it really all just works (the problem was that a logoff script was setting off the values). Doesn't seem to work for me however.

  Read the article

• MongoDB on 128mb 32-bit VPS (plus Tornado and Redis)

  - by apito

  i am curious about how mongodb will perform in a limited vps. specifically, i'll deploy this configuration on 32-bit ubuntu 9.04 server with 128Mb memory (UPDATE: now i'm considering 360mb too). nginx and redis three instances of tornado apps (one is for mobile site; limited app, not my primary audience); has around 8 Collections. social webapp for my community. mongodb all beside mongodb seems to have small footprint. memory-mapping-wise, i dont know how mongodb will behave. i know it's a little bit a stretch to use this kind of config on a tiny vps, but that's what i can afford for now. i expect to have.. hmm.. maybe ~50 15rps. i did my homework doing a lot of frontend optimizations and yslow says grade A 91 (ruleset V2) :-) anyone willing to share experiences? eg. how big the data set size when mongo hit the ceiling, performance when mongo do a lot of disk IO, etc. thanks. UPDATE: this is my pet project. i'll get back to you when i have next spare time to do same httperf in a vbox with exact spec. suggestion how to do stress testing welcomed. i'm new to this kind of stuff.

  Read the article

• 2 Printers 1 Queue

  - by Shazburg

  My issue: When an order is processed, the same document needs to be printed on two printers. My proposed solution: Create a single queue in CUPS with a backend script that spits the job out to the two real printers queues. My problem: Documentation. Maybe I'm looking at every ring around the bullseye, but I can't find anything that lays out the rules for writing a CUPS backend script. In the end, I have several questions: Is there already an option to do this in CUPS that I've missed? The line I use to add my queue is "lpadmin -p MultiPass -E -v multipass -P Generic PostScript Printer". But DeviceURI is bad unless I specify a directory like "-v multipass:/tmp". Why is this? For testing, my script does nothing but capture ARGV and write it out to a text file one line per argument. Problem is, I'm getting nothing. Logs show the job as successful, but I'm pretty sure my meager attempt at a backend isn't even being run. I've tried to keep this question brief, so please ask for more info as I'm sure I've left out the most important part in all this. Honestly, I'm just done chasing my own tail. Thank you for your time.

  Read the article

• Servers / ram for social network- how many?

  - by Marty

  I am launching my social network soon an looking into hosting. The question i am lost is: Do i need separate servers for web vs database vs image handling since there is photo sharing? Or does 1 server handle it all? Also is more ram better? If i get 50GB ram is that better than having 8 gb ram? EDIT: It is PHP codeignitor and MySQL for now. (switch to NoSQL DB later if demand calls fr it.) I will be using memcache also. Concept wise it is similar to yelp, so geographic based with lots of user content and image sharing + live feeds an privacy levels. User plan is open question. Without testing the demand for this i cant give a number. But the concept is unique, no one out there with the set of features i am releasing so it could grow. Ideally I want to plan for handling about 1-2 million views / month from launch. If it goes more than that then I will upgrade.

  Read the article

• connecting to server with multiple nics in other vlan

  - by Thierry

  I have a windows 2003 server with 3 nics on 3 vlan's (this is in domain 1). nic 1 has a default gateway to my router/firewall (sonicwall). In nic 2 and 3 I have left it empty, because it is advised like that everywhere. Within this domain and VLAN's 1-3 everything works fine. BUT... I have a second domain (domain 2) with a 4th Vlan (all 4 VLAN's connected to the same router/firewall) from which my clients need to access the 2003 server in domain 1 (it's my antivirus management console for both domains). when i ping the server from my vlan4 by it's FQDN, it randomly chooses ip from nic 1, 2 or 3 from my 2003 server. (logically because that server is know in DNS with it's 3 IP-addresses. And that is needed for my VLAN's 1-3) I don't really have a problem with that. BUT, I only get an answer of NIC1 (which sounds logically to me, because it's the only one with a gateway). It is not a router problem, because I'm testing in this phase and ping from vlan4 to any machine in vlan1, 2 or 3 that has 1 nic works just fine. If i add a gateway to nic2 and nic3, I get answer from all 3 nics and this works fine. But I know it's adviced to not do that. Can anyone give me advice in this particular case? Would it really be a problem to add a gateway to nic 2 and 3? They would be pointing to the same router/firewall (only with different ip-address, based on the vlan). Or is there another good solution to fix this problem? Thank's in advance, Thierry.

  Read the article

• Why does my microwave kill the Wi-Fi?

  - by Ohlin

  Every time I start the microwave in the kitchen, our home Wi-Fi stops working and all devices lose connection with our router! The kitchen and the Wi-Fi router are in opposite ends of the apartment but devices are being used a little here and there. We've been annoyed by the instability of the Wi-Fi for some time and it wasn't until recently we realized it was correlated to microwave usage. After some testing with having the microwave on and off we could narrow down the problem to only occurring when the router is in b/g/n mode and uses a set channel. If I change to b/g mode or set channel to auto then there is no problem any more...but still! The router is a Zyxel P-661HNU ("802.11n Wireless ADSL2+ 4-port Security Gateway" with latest firmware) and the microwave is made by Neff with an effect of 1000W (if this information might be useful to anyone). There is an "internet connection" light on the router and it doesn't go out when the interruption occurs so I think this is only an internal Wi-Fi issue. Now to my questions: What parts of the Wi-Fi can possibly be affected by the microwave usage? Frequency? Disturbances in the electrical system? How can setting Auto on channels make a difference? I thought the different channels were just some kind of separation system within the same frequency spectrum? Could this be a sign that the microwave is malfunctioning and slowly roasting us all at home? Is there any need to be worried? Since we were able to find router settings that cooperate well with our microwave's demand for attention, this question is mainly out of curiosity. But as most people out there...I just can't help the fact that I need to know how it's possible :-)

  Read the article

• Which CPU for XEN - LAMP testbed - Budget

  - by deploymonkey

  Dear serverfault knowledgeables, im in a decision dilemma right now, which I can't resolve due to lack of hands on experience. I need to build a testbed for basically virtualizing a LAMP application (os'ses not yet decided) including server side calculations. I'll opt for XEN since it seems better supported by cloud hosters at the moment. The hardware is for a proof of concept for a startup doing saas and might be used for closed live alpha/beta later on. After testing, the testbed might be a) deployed as a colocated white box server b) used as workstation Single socket is enough. We want to have ECC memory for reliability, this excludes most of the consumer line at intel. If intel CPU, then threaded cpu (HT) is preferred have at least 16 gig ram If justified by price and reliability is not too bad, a high quality desktop MB instead of a server MB would be worth a try It came down to the opteron 6128 vs. the xeon 5620 for me after a lot of research, but I don't necessarily have to be right. Which CPU is preferrable, concerning TCO (MB price, power requirements 24/7...) , Opteron 6128 or Xeon 5620? Which one offers better performance in real world applications? (Do You have any other suggestions I probably overlooked?) Thank You for Your consideration

  Read the article

• Computer Won't Boot Properly, unless in safe mode?

  - by Mr_CryptoPrime

  I bought a computer today and booted it up, but when I did I only got a blank screen. I checked to make sure it wasn't the monitor by connecting it to my old computer...it worked. I then tried connecting my monitor to both DVI ports and found that the bottom one did work. However, now it just boots up and says "loading windows" and then when the login screen is suppose to come up the screen just goes blank and monitor says "no input, check cord" (or something like that). I tried reinstalling windows and then I was able to log on normally. I used the CD's and reinstalled all the drivers, then rebooted...now I am stuck right back where I started. I tried taking out the RAM and inserting into different slots, that didn't fix anything. I was able to boot up into windows using safe-mode. I suspected that my ATI Radeon 6950 was the issue and downloaded the drivers, but I can't install them on safe-mode. Someone said to install C++ distr. and I tried doing that to fix driver installation problem of "failed to load detection driver" but it wouldn't let me do that either. Please someone help me, I don't want to have to deal with the evil redtape of sending it back to get a replacement! My computer: -Content--text-_-"http://www.newegg.com/Product/Product.aspx?Item=N82E16883229236&nm_mc=TEMC-RMA-Approvel&cm_mmc=TEMC-RMA-Approvel--Content--text-_- Driver detection problem: http://www.hardwareheaven.com/hardwareheaven-tools-discussion/174912-failed-load-detection-driver-installation-error.html Driver download page: http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx#1 I am using windows 7. Thanks again.

  Read the article

• How to sandbox a VMWare image as much as possible

  - by Craig H

  The situation: -A corporate environment, with a corporate managed XP desktop (locked down, patched regularly, restricted user rights, no manual install of SW, AV, etc.) The requirement: -Using VMWare Workstation, run a sandboxed image (also XP) for specific testing purposes (with admin rights in the guest VM). No network connectivity is required. It can't be a separate standalone physical workstation disconnected from the network. (FWIW, this is a legitimate, sanctioned requirement - not someone trying to get around corporate restrictions.) The challenge: -Do this in as safe/secure a manner as possible. The proposed solution: -Create an image with host-only networking. -Perhaps remove the virtual ethernet adapter? (not sure if it's required for basic VMWare functionality?) The question (finally): -What potential risks remain (and how could I best mitigate them)? One challenge is that the guest VM will not be a managed workstation itself, so patching, AV, etc. can't be guaranteed (and, ironically, would in fact be somewhat difficult given the proposed solution!)

  Read the article

• DNSSEC - First Signature

  - by Arancha

  I'm testing DNSSEC with Bind 9.7.2-P2. I have a question regarding the first signature created over a zone that already exists. I'm using dynamic DNS. I create the first two keys: one KSK and one ZSK. According to https://datatracker.ietf.org/doc/draft-ietf-dnsop-dnssec-key-timing/, the first ZSK needs to be published for an interval equal to Ipub, before it can be active. I create the ZSK with a Publication date previous to its Activation date. I restart the service and I can see that the key is published at Publication date, but it's no active later, when Activation date arrives. This is the configuration of the zone dnssec.es at the named.conf file: zone "dnssec.es" { auto-dnssec maintain; update-policy local; sig-validity-interval 1; key-directory "dnssec/keys_dnssec"; type master; file "dnssec/db.dnssec.es"; }; Any clue?? Regards

  Read the article

• CPU temperatures high on new build after gaming

  - by Reznor

  My friend had a problem with his computer a while back. His games were crashing, even within the menus. He was stumped as to what the problem was, so I posted on here requesting help. He found out the day later, when his computer would start up but wouldn't display anything on the screen. His video card must have came screwed up. So, he got a replacement. Now, there's a new problem. His temperatures, which were acceptable before, are now insanely high. His GPU temperature runs 70-80c, which is understandable considering he's running his games maxed out, but the real problem here is his processor and motherboard temperatures. All four of his cores are running at 88-90c after coming out of a game. His motherboard temperature was also 70c at one point. In terms of cooling, his case should definitely be adequate. He has an Antec Twelve Hundred. He's using stock fans. The cable management in his case is very good; better than average. He's using the stock heatsink with the processor too, but note, it was fine before the replacement, so it isn't like there's some inherent problem. He has checked the case too. Everything's fine! No cables in the way. The heatsink is seated properly. He turned his case fans up to high, as well, but the temperatures are persisting. Could the processor be overheating due to running games maxed out? Any ideas?

  Read the article

• How do I count the times each number appears in columns of numbers?

  - by Andy C.

  I am sure this must be easy, but I am inexperienced. About the best way to think of my problem is to think of it as trying to sort and then count lottery numbers. To stay simple, let's do a Pick 3 game. Let's look at 10 drawings. I would split each drawn number into a separate column: DATE BALL#1 BALL#2 BALL#3 3/1 1 3 5 3/2 3 7 8 3/3 2 2 1 3/4 5 7 6 3/5 2 3 1 3/6 0 5 9 3/7 3 7 0 3/8 6 8 4 3/9 2 4 3 3/10 7 1 2 I would like to be able to build formulas into cells that would tell me how many times each number appeared overall, and how many times each number appeared in the position it occurred. Like this (using the above example): Number Overall Count Ball#1 Count Ball#2 Count Ball#3 Count 0 2 1 0 1 1 4 1 1 2 (That is, The number zero appears twice overall, and came up once as the first number drawn; zero times as the middle ball; and once as the third ball. Likewise, the number 1 was drawn four times in our 10-day period. It was the first ball once, the second ball once and the third ball twice.) And so on. All help appreciated. I have access to Excel and Microsoft Works, or of course if there is a Google Docs way to handle this All thanks for any help.

  Read the article

• Apache, Tomcat and mod_jk for load balancing

  - by pHk

  Hi guys. I've set-up a basic Apache (2.2.x) and Tomcat (6.0.x) set-up using mod_jk for load balancing using the worker.properties file. Preliminary testing seems to show that this works relatively well, and it was quite easy to set-up. However; the fact that it was so easy to set-up has got me a little worried. We're dealing with 100 - 300 concurrent users using the same web application (deployed on 2 or 3 Tomcat instances). I have done a little Googling and looking around on here and there seems to be more than 1 way to accomplish this (one example on here used a balancer:// style URL, which I've never seen before in an Apache config). For example, one question I ask myself is how reliable the load detection on mod_jk really is (Busyness, Session, Request, etc). In your experience, does this set-up prove to be reliable in real world scenarios? Any pointers on improvements, pit falls or interesting literature/articles? I've worked with Apache before, but am in no way an expert. Thanks in advance.

  Read the article

• How to host an ssh server?

  - by balki

  Hi, I have a broadband internet connection. I have an wireless modem (Airtel India). I don't have a static ip address. I want to host a ssh/web/ftp server to be visible to the outside world just for testing and learning purpose so I can ask my friend to connect to my current ip address and test. My modem has an admin interface which allows to port forward and open ports. I set up ssh server as shown and checked if port 22 is open using this website , Port Scan And port 22 is open. I have an openssh server running and it works if i do, ssh [email protected] which is my local ip address but doesn't work if i do ssh [email protected] where 122.xx.xx.xx is my external ip address of my modem which i checked from whatismyipaddress.com. Since it looks like the port is open, I wonder if there is some setting I need to change in my server config to expose my server. How should I go about solving this?

  Read the article

• virtual machines, dual booting and data disks on SSD

  - by stevemarvell

  This is in planning, so if I've got the strategy wrong, please let me know. There are multiple questions here, but I think they all degenerate to the same answers. The hardware is a laptop with a single SSD. I'm trying to not lose the performance of the SSD. I plan a native dual booting Windows (plus cygwin) and Linux machine which is my BYOD and represents the development environment. I keep the codebase on a shared partition (though sometimes this is an external thunderbolt SSD) which can be natively "mounted" by whichever OS is in operation. I boot into one or the other environments depending on the task in hand. Sometime I have to develop with windows tools, but generally, Linux is my preferred development environment. It would be ideal if I could VM the other OS and run either in either. I'm going to assume, because I've not found a sensible VM based solution, that I have get samba involved to share the code partition between VMs. Is this going to blow my SSD performance in the VM? The client also supplies me with a VM for the target environment, usually linux. This is not often suited to development and is used for testing only. I normally keep two copies of this, one as a sandbox and one which I deploy to using the client's preferred method. I keep these VM snapshots on the shared partition. The latter is interacted with over the network and so has no disk sharing requirements. However, it would be useful for the sandbox to be able to "mount" the code base from the natively running OS. Is this samba or nfs again, depending on the native OS? Am I missing a trick which allows this to all work smoothly with all four environments running at once without loosing the SSD performance?

  Read the article

• BSOD error 0x0000006B PROCESS1_INITIALIZATION_FAILED on boot

  - by DontCare4Free

  I reinstalled League of Legends because the patcher always gave me an error. However, out of complete stupidness I didn't uninstall the old installation first because I thought that it would simply replace the files. However, when the installer bar got to 100% it simply minimized. Then I closed the application from the task manager. I tried uninstalling it after a failed attempt to start it up. The same behavior as when I installed it. Then I tried reinstalling where it simply presented the InstallShield Modify/Repair/Remove menu and I selected repair. Nothing happened. Then I tried selecting Modify, then seeing that the only option (called DefaultFeature) was unchecked. Same behaviour as install/uninstall. After seeing that it still failed, I uninstalled again. And after that I deleted C:\Program Files (x86)\League of Legends manually. When I tried installing LoL again it still thought I had it, so I chose repair. This time something actually happened, but it installed the whole game to C:\Windows. Seeing what was going on I clicked cancel and then started it up to try uninstalling it. However, I got an error message about something not being registered and then the minimization to I decided to let it repair completely. Then I uninstalled it and it gave only the minimization. However, when I rebooted another application started up complaining about some library being absent. So I decided to do a system restore. After letting it complete I got a BSOD every time I tried starting up Windows normally or in safe mode. However, system recovery mode works, although the system recovery automatic repair does not fix it. After a bit of searching I found a Microsoft KB article about it (981833) and tried following the workaround instructions. Nothing happened. I am using Windows 7 Home Premium 64-bit and Ubuntu 10.04 LTS 64-bit installed with WUBI.

  Read the article

• How to better copy&paste big files over RDP?

  - by WebMAOhist

  Recently I was making a few attempts to copy&paste a big (1.2 GB) file to remote computer over RDP. The remote computer is virtual testing machine with MS Windows Server 2008 Datacenter. First I tried to copy&paste before midnight when the transfer speed was limited by client computer ISP to 100 kB/s. So, it required a few hours and I was forced to cancel transfer since remote desktop became too unresponsive and sluggish (slow). So, I re-started it over midnight when my local transfer speed is over 4 GB/s 4MB/s (sorry for typo). So, my impression is that independently on speed (broadband) of copy&paste transfer the remote computer becomes sluggish while copying over RDP. At the same time downloading from internet doesn't make remote host sluggish. AFAIU, it is because clipboard of remote computer and so its memory becomes overloaded by transfer. How can I control (restrict) the usage of clipboard for specific process (pasting of file)? What are the possible way to control it? Update: After reading that slow speed of transfer is caused by encryption used for copy&pasting over RDP and since I believe I am more interested in overall efficiency: both the time, or rapidness, of getting file as well as possibility to work without waiting, I changed the question title from: How to control the usage of remote desktop clipboard usage for pasting a big file? to How to better copy&paste big files over RDP? For example, is it better to copy&paste one huge (zip) archive or unzip it and copy paste a folder with unzipped files? And more exactly I wanted to ask: What are possible ways to improve overall experience: the speed of transfer (i.e. availability of needed file) responsiveness of remote host (making remote coputer available for work before completion of copy&pasting)?

  Read the article

• Problems when pasting Outlook 2010 signature logo into message body

  - by Austin ''Danger'' Powers

  Whenever I paste my company logo into a message in Outlook 2010, I run into a variety of complications and anomalies. The dimensions of my original logo image are 315x174 (source image is a PNG file). I am scaling this image down in Photoshop CS6 to a variety of smaller sizes for testing my Outlook signature (300x166, 250x138, 200x110,150x83 and 100x55 pixels). 300x166 = no distortion. This looks the same as in Photoshop (but far too large to use in my signature). 250x130 = distorted (gets stretched much wider by Outlook when pasting into message body). 200x110 = looks reasonable, but seems to have been scaled to a different size (smaller) by Outlook for no obvious reason. 150x83 = for some reason, this is scaled by Outlook to the exact same size that 200x110 was scaled to. In fact, a large range of similar dimensions are scaled to the exact same image size by Outlook. This is very frustrating. Why is this happening and what can be done to prevent it? 100x55 = when pasting my logo from Photoshop to Outlook with these dimensions all that happens is the cursor jumps forwards about an inch on the screen, leaving a blank space where the image was supposed to go. Any advice would be much appreciated.

  Read the article

• Is there any way for ME to improve routing to an overseas server? [migrated]

  - by Simon Hartcher

  I am trying to make a connection to a gaming server in Asia from Australia, but my ISP routes my connection through the US. Tracing route to worldoftanks-sea.com [116.51.25.54]over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.1.1 2 34 ms 42 ms 45 ms 10.20.21.123 3 40 ms 40 ms 43 ms 202.7.173.145 4 51 ms 42 ms 36 ms syd-sot-ken-crt1-ge-6-0-0.tpgi.com.au [202.7.171.121] 5 175 ms 200 ms 195 ms ge5-0-5d0.cir1.seattle7-wa.us.xo.net [216.156.100.37] 6 212 ms 228 ms 229 ms vb2002.rar3.sanjose-ca.us.xo.net [207.88.13.150] 7 205 ms 204 ms 206 ms 207.88.14.226.ptr.us.xo.net [207.88.14.226] 8 207 ms 215 ms 220 ms xe-0.equinix.snjsca04.us.bb.gin.ntt.net [206.223.116.12] 9 198 ms 201 ms 199 ms ae-7.r20.snjsca04.us.bb.gin.ntt.net [129.250.5.52] 10 396 ms 391 ms 395 ms as-6.r20.sngpsi02.sg.bb.gin.ntt.net [129.250.3.89] 11 383 ms 384 ms 383 ms ae-3.r02.sngpsi02.sg.bb.gin.ntt.net [129.250.4.178] 12 364 ms 381 ms 359 ms wotsg1-slave-54.worldoftanks.sg [116.51.25.54] Trace complete. Since I think it will be unlikely that my ISP will do anything, are there any ways to improve my routing to the server without them having to intervene? NB. The game runs predominately over UDP, so I believe most low ping services are out of the question, as they rely on TCP traffic.

  Read the article

• Installing Debian 7.1 on FakeRAID/Intel Z77 results in boot with no grub menu

  - by user198982

  I'm trying to install Debian 7.1 from DVD onto 2x500GB drives which are set up in a FakeRAID mirror using the on-board FakeRAID provided by the Z77 chipset. I have followed the guide here https://wiki.debian.org/DebianInstaller/SataRaid. Namely, I booted into the expert install with the 'dmraid=true' option added, installed onto the RAID mirror which the installer correctly detected, then installed grub2 onto /dev/mapper/.. raid volume. I chose to use LVM (so a boot partition + LVM volume). As per the guide, I have uncommented the "GRUB_DISABLE_LINUX_UUID=true" line in "/etc/default/grub" and ran "update-grub" then "grub-install /dev/mapper/.." (with the right RAID device in the command). However, after I rebooted the system, all I got was a grub console. It did not load the menu. I checked and it seems that it never even generated a menu file. I re-installed Debian a few times since, trying out different options and also a few workarounds people posted online, but to no avail. The best I am getting is a grub console. No menu. Some times it will generate the grub.cfg, some times it won't, depending on the workaround I try. I was wondering if anyone else has experienced this issue. There is no need to preach how I should not use FakeRAID. I have seen others trying to figure this out so I think a resolution to this issue would be of interest to more than just me. Also, I first installed the system onto a small drive for testing something else. I made a backup with Acronis and was able to restore that onto the RAID mirror by using Universal Restore. When I installed it onto a 500GB without RAID, backed up using the same method, then restored onto a RAID volume of the same size, it would not boot and I got grub errors. Weird. I can post more details, just let me know what you want to see.

  Read the article

• Exchange 2010 OWA- Open Other User Mailbox

  - by Benjamin Jones

  I just started working for this small firm (30 people) a little bit ago, replacing their System Admin. First thing I noticed was Exchange Server 2010 was WAY out of date. Believe it or not they did not have SP1 installed. So after I installed and configured Exchange 2010 SP3 and redirected OWA I noticed something in OWA. I could add ANYONE's User Mailbox WITHOUT giving mailbox premission. I created a couple test users, same thing. I even had another employee provide me access to their OWA and they could open anyone's Inbox without granting permission. I don't want to play the blame game, but I was SHOCKED that this was going on. Luckly being such a small company I'll be able to cover this mistake that I did not create, BUT HOW? My guess is that I need to find out where the past System Admin went wrong in providing Full Access Permission? Or could this be a Auto-Mapping issue? I found this article: http://technet.microsoft.com/en-us/library/hh529943.aspx This might work $FixAutoMapping = Get-MailboxPermission sharedmailbox |where {$_.AccessRights -eq "FullAccess" -and $_.IsInherited -eq $false} $FixAutoMapping | Remove-MailboxPermission $FixAutoMapping | ForEach {Add-MailboxPermission -Identity $_.Identity -User $_.User -AccessRights:FullAccess -AutoMapping $false} However how do I insert the above code into Powershell? Again I was thrown into this mess and I'm just trying to iron out this tangled mess.

  Read the article

• Explorer.exe hangup during move large file into external drive

  - by PiotrK

  During move large files (700mb+) to external drive formated NTFS via USB 3.0 I've noticed strange things about explorer.exe (I am using Windows 7 up to date) Sometimes after move file the explorer get stuck (ie. it can happen after few files during move of several large files) - moving window freeze and I am unable to kill explorer (via taskmgr, or cmdline TASKKILL). In command line I've got something like this (taskmgr shows that explorer.exe is still running - I've got the same PID every time I try to kill it and no diagnostic message): C:\Windows\system32TASKKILL /F /IM explorer.exe SUKCES: proces "explorer.exe" o identyfikatorze PID 6296 zostal zakonczony. C:\Windows\system32TASKKILL /F /IM explorer.exe SUKCES: proces "explorer.exe" o identyfikatorze PID 6296 zostal zakonczony. If I try to run another explorer.exe process at this point, I got desktop icon and start bar back but I cannot open any explorer window After few minutes explorer.exe finally dies and I am able to rerun it without rebooting File that I moved have two copies - one local and one on the external drive (the original file wasn't delete after move); Both copies seems to contain the same data (same length and CRC info) If this happen during move of multiply files, only some files are moved and one of them have two copies (both locally and on the external drive) What can I do to fix those explorer hangs? Added: The same problem exist when copying files, it hangsup between large files Similar problem exist when I tried to use TotalCommander (x64): copying paused at 80% of one of files, TC didn't hung up (but clicking cancel in copying dialog box doesn't have any effect). During this pause I can't kill TotalCmd.exe just like Explorer.exe Added (2): This problem seems to disappear when I use 32 bit applications (like TotalCommander (x86) ), but I need to do more testing to be sure of this Added (3): There are several errors in event log, source: disk, id: 11, qualifiers: 49156, task: 0, level: 2, keywords: 0x80000000000000 (This may be important, and I forgot to mention this): Main disk is encrypted via Truecrypt (boot-in password)

  Read the article

< Previous Page | 738 739 740 741 742 743 744 745 746 747 748 749  | Next Page >