Search Results

Search found 21828 results on 874 pages for 'program x'.

Page 742/874 | < Previous Page | 738 739 740 741 742 743 744 745 746 747 748 749  | Next Page >

  • Can I use manifests to consume a COM server without specifying its version?

    - by sharptooth
    Two of our programs use the same COM server (also made by us) with the same class ids. Each program when installing copies the COM server files into its folder and regsvr32s the COM server. The problem is how to install the COM server so that the user can install either one or both of our programs into different folders in any order and likely of different versions. Clearly it's impossible without changing the class ids and that's lots of hassle with configurations. Ideally we would like to use manifests for that and go without regsvr32. The problem is every time I read about reg-free COM (for example, here) there's the version attribute in the assemblyIdentity. The version number should change every nightly build and I totally don't like the idea of (automatically) adjusting it. I understand why specifying dependency on a specific version is good, but it's completely useless in our scenarion. Is there a way to write manifests for both the COM server and the consumer so that they don't specify versions and just work with whatever version of the file happens to be in the folder? Also is there a way to restrict the search to the same folder as the consumer?

    Read the article

  • Performance Difference between HttpContext user and Thread user

    - by atrueresistance
    I am wondering what the difference between HttpContext.Current.User.Identity.Name.ToString.ToLower and Thread.CurrentPrincipal.Identity.Name.ToString.ToLower. Both methods grab the username in my asp.net 3.5 web service. I decided to figure out if there was any difference in performance using a little program. Running from full Stop to Start Debugging in every run. Dim st As DateTime = DateAndTime.Now Try 'user = HttpContext.Current.User.Identity.Name.ToString.ToLower user = Thread.CurrentPrincipal.Identity.Name.ToString.ToLower Dim dif As TimeSpan = Now.Subtract(st) Dim break As String = "nothing" Catch ex As Exception user = "Undefined" End Try I set a breakpoint on break to read the value of dif. The results were the same for both methods. dif.Milliseconds 0 Integer dif.Ticks 0 Long Using a longer duration, loop 5,000 times results in these figures. Thread Method run 1 dif.Milliseconds 125 Integer dif.Ticks 1250000 Long run 2 dif.Milliseconds 0 Integer dif.Ticks 0 Long run 3 dif.Milliseconds 0 Integer dif.Ticks 0 Long HttpContext Method run 1 dif.Milliseconds 15 Integer dif.Ticks 156250 Long run 2 dif.Milliseconds 156 Integer dif.Ticks 1562500 Long run 3 dif.Milliseconds 0 Integer dif.Ticks 0 Long So I guess what is more prefered, or more compliant with webservice standards? If there is some type of a performance advantage, I can't really tell. Which one scales to larger environments easier?

    Read the article

  • sql exception arithmetic overflow?

    - by MyHeadHurts
    In my program the user imports a date and it works whenever the year is in 2011 but if i try a date in 2010 i get this error which is weird [ SqlException (0x80131904): Arithmetic overflow error converting int to data type numeric.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +1950890 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +4846875 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +194 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +2392 System.Data.SqlClient.SqlDataReader.HasMoreRows() +157 System.Data.SqlClient.SqlDataReader.ReadInternal(Boolean setTimeout) +197 System.Data.SqlClient.SqlDataReader.Read() +9 System.Data.Common.DataAdapter.FillLoadDataRow(SchemaMapping mapping) +78 System.Data.Common.DataAdapter.FillFromReader(DataSet dataset, DataTable datatable, String srcTable, DataReaderContainer dataReader, Int32 startRecord, Int32 maxRecords, DataColumn parentChapterColumn, Object parentChapterValue) +164 System.Data.Common.DataAdapter.Fill(DataTable[] dataTables, IDataReader dataReader, Int32 startRecord, Int32 maxRecords) +282 System.Data.Common.LoadAdapter.FillFromReader(DataTable[] dataTables, IDataReader dataReader, Int32 startRecord, Int32 maxRecords) +19 System.Data.DataTable.Load(IDataReader reader, LoadOption loadOption, FillErrorEventHandler errorHandler) +222 System.Data.DataTable.Load(IDataReader reader) +14 ( @YearToGet int, @current datetime, @y int, @search datetime ) AS SET @YearToGet = 2006; WITH Years AS ( SELECT DATEPART(year, GETDATE()) [Year] UNION ALL SELECT [Year]-1 FROM Years WHERE [Year]>@YearToGet ), q_00 as ( select DIVISION , DYYYY , sum(PARTY) as asofPAX , sum(InsAmount) as asofSales from dbo.B101BookingsDetails INNER JOIN Years ON B101BookingsDetails.DYYYY = Years.Year where Booked <= CONVERT(int, DateAdd(year, (Years.Year - @y), @search)) and DYYYY = Years.Year group by DIVISION, DYYYY, years.year having DYYYY = years.year ), q_01 as ( select DIVISION , DYYYY , sum(PARTY) as YEPAX , sum(InsAmount) as YESales from dbo.B101BookingsDetails INNER JOIN Years ON B101BookingsDetails.DYYYY = Years.Year group by DIVISION, DYYYY , years.year having DYYYY = years.year ), q_02 as ( select DIVISION , DYYYY , sum(PARTY) as CurrentPAX , sum(InsAmount) as CurrentSales from dbo.B101BookingsDetails INNER JOIN Years ON B101BookingsDetails.DYYYY = Years.Year where Booked <= CONVERT(int,@current) and DYYYY = (year( getdate() )) group by DIVISION, DYYYY ) select a.DIVISION , a.DYYYY , asofPAX , asofSales , YEPAX , YESales , CurrentPAX , CurrentSales ,asofsales/ ISNULL(NULLIF(yesales,0),1) as percentsales, CAST((asofpax) AS DECIMAL(5,1))/yepax as percentpax from q_00 as a join q_01 as b on (b.DIVISION = a.DIVISION and b.DYYYY = a.DYYYY) join q_02 as c on (b.DIVISION = c.DIVISION) JOIN Years as d on (b.dyyyy = d.year) where A.DYYYY <> (year( getdate() )) order by a.DIVISION, a.DYYYY ;

    Read the article

  • Where to put a textfile I want to use in eclipse?

    - by Jayomat
    hi there, I need to read a text file when I start my program. I'm using eclipse and started a new java project. In my project folder I got the "src" folder and the standard "JRE System Library"... I just don't know where to put the text file. I cannot use a "hard coded" path because the text file needs to be included with my app... I also tried to create a new folder like "Files" and use the pathe "Files/staedteliste.txt".. doesn't work too... I use the following code to read the file, but I get this error: Error:java.io.FileNotFoundException:staedteliste.txt(No such file or directory) import java.io.BufferedReader; import java.io.FileReader; import java.io.IOException; import java.util.ArrayList; public class Test { ArrayList<String[]> values; public static void main(String[] args) { // TODO Auto-generated method stub loadList(); } public static void loadList() { BufferedReader reader; String zeile = null; try { reader = new BufferedReader(new FileReader("staedteliste.txt")); zeile = reader.readLine(); ArrayList<String[]> values = new ArrayList<String[]>(); while (zeile != null) { values.add(zeile.split(";")); zeile = reader.readLine(); } System.out.println(values.size()); System.out.println(zeile); } catch (IOException e) { System.err.println("Error :"+e); } } } thx for help!

    Read the article

  • Script to copy files on CD and not on hard disk to a new directory

    - by John22
    I need to copy files from a set of CDs that have a lot of duplicate content, with each other, and with what's already on my hard disk. The file names of identical files are not the same, and are in sub-directories of different names. I want to copy non-duplicate files from the CD into a new directory on the hard disk. I don't care about the sub-directories - I will sort it out later - I just want the unique files. I can't find software to do that - see my post at SuperUser http://superuser.com/questions/129944/software-to-copy-non-duplicate-files-from-cd-dvd Someone at SuperUser suggested I write a script using GNU's "find" and the Win32 version of some checksum tools. I glanced at that, and have not done anything like that before. I'm hoping something exists that I can modify. I found a good program to delete duplicates, Duplicate Cleaner (it compares checksums), but it won't help me here, as I'd have to copy all the CDs to disk, and each is probably about 80% duplicates, and I don't have room to do that - I'd have to cycle through a few at a time copying everything, then turning around and deleting 80% of it, working the hard drive a lot. Thanks for any help.

    Read the article

  • Python Turtle Graphics, how to plot functions over an interval?

    - by TheDragonAce
    I need to plot a function over a specified interval. The function is f1, which is shown below in the code, and the interval is [-7, -3]; [-1, 1]; [3, 7] with a step of .01. When I execute the program, nothing is drawn. Any ideas? import turtle from math import sqrt wn = turtle.Screen() wn.bgcolor("white") wn.title("Plotting") mypen = turtle.Turtle() mypen.shape("classic") mypen.color("black") mypen.speed(10) while True: try: def f1(x): return 2 * sqrt((-abs(abs(x)-1)) * abs(3 - abs(x))/((abs(x)-1)*(3-abs(x)))) * \ (1 + abs(abs(x)-3)/(abs(x)-3))*sqrt(1-(x/7)**2)+(5+0.97*(abs(x-0.5)+abs(x+0.5))-\ 3*(abs(x-0.75)+abs(x+0.75)))*(1+abs(1-abs(x))/(1-abs(x))) mypen.penup() step=.01 startf11=-7 stopf11=-3 startf12=-1 stopf12=1 startf13=3 stopf13=7 def f11 (startf11,stopf11,step): rc=[] y = f1(startf11) while y<=stopf11: rc.append(startf11) #y+=step mypen.setpos(f1(startf11)*25,y*25) mypen.dot() def f12 (startf12,stopf12,step): rc=[] y = f1(startf12) while y<=stopf12: rc.append(startf12) #y+=step mypen.setpos(f1(startf12)*25, y*25) mypen.dot() def f13 (startf13,stopf13,step): rc=[] y = f1(startf13) while y<=stopf13: rc.append(startf13) #y+=step mypen.setpos(f1(startf13)*25, y*25) mypen.dot() f11(startf11,stopf11,step) f12(startf12,stopf12,step) f13(startf13,stopf13,step) except ZeroDivisionError: continue

    Read the article

  • How to modify/replace option set file when building from command line?

    - by Heinrich Ulbricht
    I build packages from a batch file using commands like: msbuild ..\lib\Package.dproj /target:Build /p:config=%1 The packages' settings are dependent on an option set: <Import Project="..\optionsets\COND_Defined.optset" Condition="'$(Base)'!='' And Exists('..\optionsets\COND_Defined.optset')"/> This option set defines a conditional symbol many of my packages depend on. The file looks like this: <Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <PropertyGroup> <DCC_Define>CONDITION;$(DCC_Define)</DCC_Define> </PropertyGroup> <ProjectExtensions> <Borland.Personality>Delphi.Personality.12</Borland.Personality> <Borland.ProjectType>OptionSet</Borland.ProjectType> <BorlandProject> <Delphi.Personality/> </BorlandProject> <ProjectFileVersion>12</ProjectFileVersion> </ProjectExtensions> </Project> Now I need two builds: one with the condition defined and one without. My attack vector would be the option set file. I have some ideas on what to do: write a program which modifies the option set file, run this before batch build fiddle with the project files and modify the option set path to contain an environment variable, then have different option sets in different locations But before starting to reinvent the wheel I'd like to ask how you would tackle this task? Maybe there are already means meant to support such a case (like certain command line switches, things I could configure in Delphi or batch file magic).

    Read the article

  • Will the following NHibernate interface mapping work?

    - by Ben Aston
    I'd like to program against interfaces when working with NHibernate due to type dependency issues within the solution I am working with. SO questions such as this indicate it is possible. I have an ILocation interface and a concrete Location type. Will the following work? HBM mapping: <class name="ILocation" abstract="true" table="ILocation"> <id name="Id" type="System.Guid" unsaved-value="00000000-0000-0000-0000-000000000000"> <column name="LocationId" /> <generator class="guid" /> </id> <union-subclass table="Location" name="Location"> <property name="Name" type="System.String"/> </union-subclass> </class> Detached criteria usage using the interface: var criteria = DetachedCriteria.For<ILocation>().Add(Restrictions.Eq("Name", "blah")); var locations = criteria.GetExecutableCriteria(UoW.Session).List<ILocation>(); Are there any issues with not using the hilo ID generator and/or with this approach in general?

    Read the article

  • Ways to gain a deeper understanding of programming concepts?

    - by MrPlow
    I'm a marketer and have been messing around in PHP/MySQL for years. Recently (the last several months) I've been making my own scripts/programs in Python and I've really enjoyed the whole problem solving process. I've read(skimmed) some books and understand the basics of OOP, polymorphism, etc.. I have a general interest in AI and Natural Language in particular but it seems these things require a masters in Computer Science. My knowledge of math is poor. The last class I took was calculus, and I've forgotten the majority of it. Basically I'm looking for things to learn that will help me think in a more analytic way, and maybe see solutions where I didn't before. Improving my ability to program in Python would be nice too. I don't need to learn a specific language or something for employment, just enjoyment. Although my work often involves web development so some utility would be nice. I don't like learning concepts by just reading them. I need to apply them, even if the examples are contrived. A recommendation of a couple good books or other resources would be nice. :) Apologies if this is too vague/misplaced...

    Read the article

  • Can I ignore a SIGFPE resulting from division by zero?

    - by Mikeage
    I have a program which deliberately performs a divide by zero (and stores the result in a volatile variable) in order to halt in certain circumstances. However, I'd like to be able to disable this halting, without changing the macro that performs the division by zero. Is there any way to ignore it? I've tried using #include <signal.h> ... int main(void) { signal(SIGFPE, SIG_IGN); ... } but it still dies with the message "Floating point exception (core dumped)". I don't actually use the value, so I don't really care what's assigned to the variable; 0, random, undefined... EDIT: I know this is not the most portable, but it's intended for an embedded device which runs on many different OSes. The default halt action is to divide by zero; other platforms require different tricks to force a watchdog induced reboot (such as an infinite loop with interrupts disabled). For a PC (linux) test environment, I wanted to disable the halt on division by zero without relying on things like assert.

    Read the article

  • Writing language converter in ANTLR

    - by Stefan
    I'm writing a converter between some dialects of the same programming language. I've found a grammar on the net - it's complex and handles all the cases. Now I'm trying to write the appropriate actions. Most of the input is just going to be rewritten to output. What I need to do is parse function calls, do my magic (rename function, reorder arguments, etc) and write it. I'm using AST as output. When I come across a function call, I build a custom object structure (from classes defined in my target language), call the appropriate function and I have a string that represents the transformed function that I want to get. The problem is, what I'm supposed to do with that string? I'd like to replace the .text attribute of the enclosing rule, but setText() is only available on lexer rules and the rule's .text attribute is read-only. How to solve this problem? program : statement_list { output = $statement_list.text; } ; //... statement : expression_statement // ... ; expression_statement : function_call // ... ; function_call : ID '(' { /* build the object, assign name */ Function function = new Function(); //... } ( arg1 = expression { /* add first parameter */ } ( ',' arg2 = expression { /* add the rest of parameters */ } )* )? ')' { /* convert the function call */ string converted = Tools.Convert(function); // $setText(converted); // doesn't work // $functionCall.text = converted; // doesn't work } ;

    Read the article

  • Java: Exception in thread main java.lang.NoClassDefFoundError

    - by cath
    I am trying to get the Red5 Flash Media Server working on my computer. I have installed it, but when I run the server I get this error Exception in thread "main" java.lang.NoClassDefFoundError: org/red5/server/Bootstrap Caused by: java.lang.ClassNotFoundException: org.red5.server.Bootstrap at java.net.URLClassLoader$1.run(URLClassLoader.java:217) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:205) at java.lang.ClassLoader.loadClass(ClassLoader.java:321) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:294) at java.lang.ClassLoader.loadClass(ClassLoader.java:266) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:334) Could not find the main class: org.red5.server.Bootstrap. Program will exit. I came across this link where someone had the same issue: http://trac.red5.org/ticket/762 It looks like they ran this command: export CLASSPATH=3D$RED5_HOME/lib/slf4j-api-1.5.10.jar:$RED5_HOME/lib/logback- core-0.9.18.jar:$RED5_HOME/lib/logback-classic-0.9.18.jar I have red5 installed in /usr/share/red5, so I ran this: export CLASSPATH=3D$/usr/share/red5/lib/slf4j-api-1.5.10.jar:$/usr/share/red5/lib/logback-core-0.9.18.jar:$/usr/share/red5/lib/logback-classic-0.9.18.jar Yet despite all this I am still seeing the same error message.

    Read the article

  • How to call Twiter's Streaming/Filter Feed with urllib2/httplib?

    - by Simon
    Update: I switched this back from answered as I tried the solution posed in cogent Nick's answer and switched to Google's urlfetch: logging.debug("starting urlfetch for http://%s%s" % (self.host, self.url)) result = urlfetch.fetch("http://%s%s" % (self.host, self.url), payload=self.body, method="POST", headers=self.headers, allow_truncated=True, deadline=5) logging.debug("finished urlfetch") but unfortunately finished urlfetch is never printed - I see the timeout happen in the logs (it returns 200 after 5 seconds), but execution doesn't seem tor return. Hi All- I'm attempting to play around with Twitter's Streaming (aka firehose) API with Google App Engine (I'm aware this probably isn't a great long term play as you can't keep the connection perpetually open with GAE), but so far I haven't had any luck getting my program to actually parse the results returned by Twitter. Some code: logging.debug("firing up urllib2") req = urllib2.Request(url="http://%s%s" % (self.host, self.url), data=self.body, headers=self.headers) logging.debug("called urlopen for %s %s, about to call urlopen" % (self.host, self.url)) fobj = urllib2.urlopen(req) logging.debug("called urlopen") When this executes, unfortunately, my debug output never shows the called urlopen line printed. I suspect what's happening is that Twitter keeps the connection open and urllib2 doesn't return because the server doesn't terminate the connection. Wireshark shows the request being sent properly and a response returned with results. I tried adding Connection: close to my request header, but that didn't yield a successful result. Any ideas on how to get this to work? thanks -Simon

    Read the article

  • Simple Enterprise Library console application refuses to compile

    - by Vadim
    I just downloaded and installed Microsoft Enterprise Library 5.0. I fired up VS 2010 to play with EL 5 and created a very simple console application. However, it would not compile. I got the following error: The type or namespace name 'Data' does not exist in the namespace 'Microsoft.Practices.EnterpriseLibrary' (are you missing an assembly reference?) I added Microsoft.Practices.EnterpriseLibrary.Common, Microsoft.Practices.EnterpriseLibrary.Data, and Microsoft.Practices.Unity references to my project. Here's the simple code that refuses to compile. using Microsoft.Practices.EnterpriseLibrary.Common.Configuration.Unity; using Microsoft.Practices.EnterpriseLibrary.Data; using Microsoft.Practices.Unity; namespace EntLib { class Program { static void Main(string[] args) { IUnityContainer container = new UnityContainer(); container.AddNewExtension<EnterpriseLibraryCoreExtension>(); var defaultDatabase = container.Resolve<Database>(); } } } The error above complains about line #2 : using Microsoft.Practices.EnterpriseLibrary.Data; Someone probably will point out to a stupid mistake by me, but at the moment I fail to see it. I tried to remove and add again Microsoft.Practices.EnterpriseLibrary.Data to refences but it didn't help.

    Read the article

  • Color picker does not give gradient appearance

    - by ykaratoprak
    i added below codes. But it generates to me 16 color. but i need 16 color between "red" and "khaki". i don't need gradient flow. My colors look like gradient flow. My colors must not closer to each other. Because i will use this codes return values in chart columns. they are too near each other. static class Program { [STAThread] static void Main() { Form form = new Form(); Color start = Color.Red, end = Color.Khaki; for (int i = 0; i < 16; i++) { int r = Interpolate(start.R, end.R, 15, i), g = Interpolate(start.G, end.G, 15, i), b = Interpolate(start.B, end.B, 15, i); Button button = new Button(); button.Dock = DockStyle.Top; button.BackColor = Color.FromArgb(r, g, b); form.Controls.Add(button); button.BringToFront(); } Application.Run(form); } static int Interpolate(int start, int end, int steps, int count) { float s = start, e = end, final = s + (((e - s) / steps) * count); return (int)final; } }

    Read the article

  • J2ME cache issue

    - by kiennt
    I have to write a J2ME app to retrieve images from server and display in mobile phone. I have seen and test that Snaptu have a mechanism to cache image, event with 100 images (both normal size and zoom size). I wonder how they can do that? I though that those guys use rms to save image stream to data. But when i check in working folder of simulater( I use Windows XP and Sun Wireless Toolkit 3.0, the Emulator device i use to run my program is CLDC Device 1 - my working folder is C:\Document And Settings\Administrator\javame-sdk\3.0\work\6\appdb), i see some .db file. When i delete these files, i still can view cache image in my emulator???? I also thought that those guys use heap memory to save image. But it is not correct because when i set limit device memory is 2MB (like some mobile phones), and i load and view 100 images in zoom size, it didn't make OutOfMemory Error? It so weird. Any one can help me? Thanks

    Read the article

  • Compilation Error: "The modifier 'public' is not valid for this item" while creating public method o

    - by Lalit
    I am getting this error while creating public method on a class for explicitly implementing the interface. I have the workaround: by removing the explicit implementation of PrintName Method, But surprised why i am getting this error. Can anyone explain the error. Code for Library: using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace Test.Lib1 { public class Customer : i1 { public string i1.PrintName() //Error Here... { return this.GetType().Name + " called from interface i1"; } } public interface i1 { string PrintName(); } interface i2 { string PrintName(); } } Code for Console Test Application: using System; using System.Collections.Generic; using System.Linq; using System.Text; using Test.Lib1; namespace ca1.Test { class Program { static void Main(string[] args) { Customer customer = new Customer(); Console.WriteLine(customer.PrintName()); //i1 i1o = new Customer(); //Console.WriteLine(i1o.printname()); //i2 i2o = new Customer(); //Console.WriteLine(i2o.printname()); } } }

    Read the article

  • Deployment Setup (.Net) - Search target machine -> Registry search (64 bit)

    - by Joonas Kirsebom
    I have a windows installer project which installs some software (winform, service, mce addin). During the installation I need to search the machine for a registry key. This is done with with the "Launch Condition" - "Add Registry Search" (Deployment Project). I have filled out all the properties right, and checked against the regestry that the value actually can be found. The problem is that the "Registry Search" searches in the x86 part of the registry (HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\...) although my system is a x64 and the deployment setup is also set to x64. Does anyone know how to force the "Registry Search" to search the x64 registry? Or know about a workaround? The weird thing about this, is that Registry setting in the deployment setup is writing to the right registry (x64). My idea is that the "Registry Search" program is only developed to the x86 architecture, and therefore can't read the right registry. I found this article from microsoft, so it seams that they know about this problem. https://connect.microsoft.com/VisualStudio/feedback/ViewFeedback.aspx?FeedbackID=110105&wa=wsignin1.0#details My system is: Windows 7 64bit Visual Studio 2008

    Read the article

  • is mysql index useful on column 'state' when only doing bit-operations on the column?

    - by Geert-Jan
    I have a lot of domain entities (stored in mysql) which undergo lots of different operations. Each operation is executed from a different program. I need to keep (flow)-state for these entities which I implemented in as a long field 'flowstate' used as a bitset. to query mysql for entities which have undergone a certain operation I do something like: select * from entities where state >> 7 & 1 = 1 Indicating bit 7 (cooresponding to operation 7) has run. (<-- simplified) Anyway, I really didn't pay attention to the performance implications of this setup in the beginning, and I think I'm in a bit of trouble since queries as the above run pretty slow. What I'd like to know: Does an mysql index on 'flowstate' help at all? After all it's not a single value Mysql can quickly find using a binary sort or whatever. If it doesn't, are there any other things I could do to speed things up? . Are there special 'mask-indices' for fields with use-cases as the above? TIA, Geert-jan

    Read the article

  • Delete Duplicate records from large csv file C# .Net

    - by Sandhurst
    I have created a solution which read a large csv file currently 20-30 mb in size, I have tried to delete the duplicate rows based on certain column values that the user chooses at run time using the usual technique of finding duplicate rows but its so slow that it seems the program is not working at all. What other technique can be applied to remove duplicate records from a csv file Here's the code, definitely I am doing something wrong DataTable dtCSV = ReadCsv(file, columns); //columns is a list of string List column DataTable dt=RemoveDuplicateRecords(dtCSV, columns); private DataTable RemoveDuplicateRecords(DataTable dtCSV, List<string> columns) { DataView dv = dtCSV.DefaultView; string RowFilter=string.Empty; if(dt==null) dt = dv.ToTable().Clone(); DataRow row = dtCSV.Rows[0]; foreach (DataRow row in dtCSV.Rows) { try { RowFilter = string.Empty; foreach (string column in columns) { string col = column; RowFilter += "[" + col + "]" + "='" + row[col].ToString().Replace("'","''") + "' and "; } RowFilter = RowFilter.Substring(0, RowFilter.Length - 4); dv.RowFilter = RowFilter; DataRow dr = dt.NewRow(); bool result = RowExists(dt, RowFilter); if (!result) { dr.ItemArray = dv.ToTable().Rows[0].ItemArray; dt.Rows.Add(dr); } } catch (Exception ex) { } } return dt; }

    Read the article

  • LOAD DATA INFILE with variables

    - by Hasitha
    I was tring to use the LOAD DATA INFILE as a sotred procedure but it seems it cannot be done. Then i tried the usual way of embedding the code to the application itself like so, conn = new MySqlConnection(connStr); conn.Open(); MySqlCommand cmd = new MySqlCommand(); cmd = conn.CreateCommand(); string tableName = getTableName(serverName); string query = "LOAD DATA INFILE '" + fileName + "'INTO TABLE "+ tableName +" FIELDS TERMINATED BY '"+colSep+"' ENCLOSED BY '"+colEncap+"' ESCAPED BY '"+colEncap+"'LINES TERMINATED BY '"+colNewLine+"' ("+colUpFormat+");"; cmd.CommandText = query; cmd.ExecuteNonQuery(); conn.Close(); The generated query that gets saved in the string variable query is, LOAD DATA INFILE 'data_file.csv'INTO TABLE tbl_shadowserver_bot_geo FIELDS TERMINATED BY ',' ENCLOSED BY '"' ESCAPED BY '"'LINES TERMINATED BY '\n' (timestamp,ip,port,asn,@dummy,@dummy,@dummy,@dummy,@dummy,@dummy,url,agent,@dummy,@dummy,@dummy,@dummy,@dummy,@dummy,@dummy,@dummy,@dummy,@dummy,@dummy); But now when i run the program it gives an error saying, MySQLException(0x80004005) Parameter @dummy must be defined first. I dont know how to get around this, but when i use the same query on mysql itself directly it works fine. PLEASE help me..thank you very much :)

    Read the article

  • In C#, are event handler arguments covariant?

    - by Roger Lipscombe
    Maybe covariant's not the word, but if I have a class that raises an event, with (e.g.) FrobbingEventArgs, am I allowed to handle it with a method that takes EventArgs? Here's some code: class Program { static void Main(string[] args) { Frobber frobber = new Frobber(); frobber.Frobbing += FrobberOnFrobbing; frobber.Frob(); } private static void FrobberOnFrobbing(object sender, EventArgs e) { // Do something interesting. Note that the parameter is 'EventArgs'. } } internal class Frobber { public event EventHandler<FrobbingEventArgs> Frobbing; public event EventHandler<FrobbedEventArgs> Frobbed; public void Frob() { OnFrobbing(); // Frob. OnFrobbed(); } private void OnFrobbing() { var handler = Frobbing; if (handler != null) handler(this, new FrobbingEventArgs()); } private void OnFrobbed() { var handler = Frobbed; if (handler != null) handler(this, new FrobbedEventArgs()); } } internal class FrobbedEventArgs : EventArgs { } internal class FrobbingEventArgs : EventArgs { } The reason I ask is that ReSharper seems to have a problem with (what looks like) the equivalent in XAML, and I'm wondering if it's a bug in ReSharper, or a mistake in my understanding of C#.

    Read the article

  • C++ cin keeps skipping.....

    - by user69514
    I am having problems with my program. WHen I run it, it asks the user for the album, the title, but then it just exits the loop without asking for the price and the sale tax. Any ideas what's going on? This is a sample run Discounts effective for September 15, 2010 Classical 8% Country 4% International 17% Jazz 0% Rock 16% Show 12% Are there more transactions? Y/N y Enter Artist of CD: Sevendust Enter Title of CD: Self titled Enter Genre of CD: Rock enter price Are there more transactions? Y/N Thank you for shopping with us! Program code: #include <iostream> #include <string> using namespace std; int counter = 0; string discount_tiles[] = {"Classical", "Country", "International", "Jazz", "Rock", "Show"}; int discount_amounts[] = {8, 4, 17, 0, 16, 12, 14}; string date = "September 15, 2010"; // Array Declerations //Artist array char** artist = new char *[100]; //Title array char** title = new char *[100]; //Genres array char** genres = new char *[100]; //Price array double* price[100]; //Discount array double* tax[100]; // sale price array double* sale_price[100]; //sale tax array double* sale_tax[100]; //cash price array double* cash_price[100]; //Begin Prototypes char* getArtist(); char* getTitle(); char* getGenre(); double* getPrice(); double* getTax(); unsigned int* AssignDiscounts(); void ReadTransaction (char ** artist, char ** title, char ** genre, float ** cash, float & taxrate, int albumcount); void computesaleprice(); bool AreThereMore (); //End Prototypes bool areThereMore () { char answer; cout << "Are there more transactions? Y/N" << endl; cin >> answer; if (answer =='y' || answer =='Y') return true; else return false; } char* getArtist() { char * artist= new char [100]; cout << "Enter Artist of CD: " << endl; cin.getline(artist,100); cin.ignore(); return artist; } char* getTitle() { char * title= new char [100]; cout << "Enter Title of CD: " << endl; cin.getline(title,100); cin.ignore(); return title; } char* getGenre() { char * genre= new char [100]; cout << "Enter Genre of CD: " << endl; cin.getline(genre,100); cin.ignore(); return genre; } double* getPrice() { //double* price = new double(); //cout << "Enter Price of CD: " << endl; //cin >> *price; //return price; double p = 0.0; cout<< "enter price" << endl; cin >> p; cin.ignore(); double* pp = &p; return pp; } double* getTax() { double* tax= new double(); cout << "Enter local sales tax: " << endl; cin >> *tax; return tax; } int findDiscount(string str){ if(str.compare(discount_tiles[0]) == 0) return discount_amounts[0]; else if(str.compare(discount_tiles[0]) == 0) return discount_amounts[1]; else if(str.compare(discount_tiles[0]) == 0) return discount_amounts[2]; else if(str.compare(discount_tiles[0]) == 0) return discount_amounts[3]; else if(str.compare(discount_tiles[0]) == 0) return discount_amounts[4]; else if(str.compare(discount_tiles[0]) == 0) return discount_amounts[5]; else{ cout << "Error in findDiscount function" << endl; return 0; } } void computesaleprice() { /** fill in array for all purchases **/ for( int i=0; i<=counter; i++){ double temp = *price[i]; temp -= findDiscount(genres[i]); double* tmpPntr = new double(); tmpPntr = &temp; sale_price[i] = tmpPntr; delete(&temp); delete(tmpPntr); } } void printDailyDiscounts(){ cout << "Discounts effective for " << date << endl; for(int i=0; i < 6; i++){ cout << discount_tiles[i] << "\t" << discount_amounts[i] << "%" << endl; } } //Begin Main int main () { for( int i=0; i<100; i++){ artist[i]=new char [100]; title[i]=new char [100]; genres[i]=new char [100]; price[i] = new double(0.0); tax[i] = new double(0.0); } // End Array Decleration printDailyDiscounts(); bool flag = true; while(flag == true){ if(areThereMore() == true){ artist[counter] = getArtist(); title[counter] = getTitle(); genres[counter] = getGenre(); price[counter] = getPrice(); //tax[counter] = getTax(); //counter++; flag = true; } else { flag = false; } } //compute sale prices //computesaleprice(); cout << "Thank you for shopping with us!" << endl; return 0; } //End Main /** void ReadTransaction (char ** artist, char ** title, char ** genre, float ** cash, float & taxrate, int albumcount) { strcpy(artist[albumcount],getArtist()); strcpy(title[albumcount],getTitle()); strcpy(genre[albumcount],getGenre()); //cash[albumcount][0]=computesaleprice();??????? //taxrate=getTax;?????????????? } * * */ unsigned int * AssignDiscounts() { unsigned int * discount = new unsigned int [7]; cout << "Enter Classical Discount: " << endl; cin >> discount[0]; cout << "Enter Country Discount: " << endl; cin >> discount[1]; cout << "Enter International Discount: " << endl; cin >> discount[2]; cout << "Enter Jazz Discount: " << endl; cin >> discount[3]; cout << "Enter Pop Discount: " << endl; cin >> discount[4]; cout << "Enter Rock Discount: " << endl; cin >> discount[5]; cout << "Enter Show Discount: " << endl; cin >> discount[6]; return discount; } /** char ** AssignGenres () { char ** genres = new char * [7]; for (int x=0;x<7;x++) genres[x] = new char [20]; strcpy(genres [0], "Classical"); strcpy(genres [1], "Country"); strcpy(genres [2], "International"); strcpy(genres [3], "Jazz"); strcpy(genres [4], "Pop"); strcpy(genres [5], "Rock"); strcpy(genres [6], "Show"); return genres; } **/ float getTax(float taxrate) { cout << "Please enter store tax rate: " << endl; cin >> taxrate; return taxrate; }

    Read the article

  • Something preventing default (explorer-style) CListCtrl jump to line behaviour

    - by andywebsdale
    I'm maintaining an MFC/COM/ATL 45-odd project solution originally written with VS6. I'm now using VS2008. I'm looking at a list control(vanilla CListCtrl) which doesn't behave as we think it should. Normally in an MFC list control you can press a key, (Q say) & selection will jump down to the 1st line beginning with 'Q' (like windows explorer). Does anyone have an idea as to why this might not happen? The styles/Extended styles are set the same as another control in the same project, which DOES work OK. Do I have to send my own message, or is there a flag, etc. that controls that functionality or what? Normally Google would supply the answer, but I haven't been able to frame my query correctly to come up with the relevant info this time. Here's the line from the .rc file for the CListCtrl that doesn't jump to a line on keypress: CONTROL "List1",IDC_BAL_LIST,"SysListView32",LVS_REPORT | LVS_SHOWSELALWAYS | WS_BORDER | WS_TABSTOP,0,73,493,230 And here's a line from the same .rc file showing a list control that does do that: CONTROL "List1",IDC_LIST1,"SysListView32",LVS_REPORT | LVS_SHOWSELALWAYS | WS_BORDER | WS_TABSTOP,1,38,501,219 As you can see, there's no obvious difference to the properties, so what program code would affect it?

    Read the article

  • Precision error on matrix multiplication

    - by Wam
    Hello all, Coding a matrix multiplication in my program, I get precision errors (inaccurate results for large matrices). Here's my code. The current object has data stored in a flattened array, row after row. Other matrix B has data stored in a flattened array, column after column (so I can use pointer arithmetic). protected double[,] multiply (IMatrix B) { int columns = B.columns; int rows = Rows; int size = Columns; double[,] result = new double[rows,columns]; for (int row = 0; row < rows; row++) { for (int col = 0; col < columns; col++) { unsafe { fixed (float* ptrThis = data) fixed (float* ptrB = B.Data) { float* mePtr = ptrThis + row*rows; float* bPtr = ptrB + col*columns; double value = 0.0; for (int i = 0; i < size; i++) { value += *(mePtr++) * *(bPtr++); } result[row, col] = value; } } } } } Actually, the code is a bit more complicated : I do the multiply thing for several chunks (so instead of having i from 0 to size, I go from localStart to localStop), then sum up the resulting matrices. My problem : for a big matrix I get precision error : NUnit.Framework.AssertionException: Error at (0,1) expected: <6.4209571409444209E+18> but was: <6.4207619776304906E+18> Any idea ?

    Read the article

< Previous Page | 738 739 740 741 742 743 744 745 746 747 748 749  | Next Page >