Search Results

Search found 26509 results on 1061 pages for 'network manager'.

Page 743/1061 | < Previous Page | 739 740 741 742 743 744 745 746 747 748 749 750  | Next Page >

• windows 7 no internet access

  - by Kyle

  Just did a fresh install of Windows 7, and the network and sharing center says no internet access. Disabling and enabling the adapter seems to fix the issue temporarily, but the internet stops working shortly after. I have installed the latest NIC drivers and have installed all Windows updates. I have also tried manually setting the ip/gateway/dns and running netsh int ip reset in an elevated command prompt. I am running Windows 7 Home Premium 64bit with a wired connection. I have searched for hours, but have found no working solutions. Does anyone have any ideas?

  Read the article

• BAD DC transfering FSMO Roles to ADC

  - by Suleman

  I have a DC (FQDN:server.icmcpk.local) and an ADC (FQDN:file-server.icmcpk.local). Recently my DC is facing a bad sector problem so I changed the Operation Masters to file-server for all five roles. but when ever i turn off the OLD DC the file-server also stops wroking with AD and GPMC further i m also unable to join any other computer to this domain. For Test purpose i also added a new ADC (FQDN:wds-server.icmcpk.local) but no succes with the old DC off i had to turn the old DC on and then joined it. I m attaching the Dcdiags for all three servers. Kindly help me so that i b able to reinstall new HDD and it can go online again. --------------------------------------- Server --------------------------------------- C:\Program Files\Support Tools>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\SERVER Starting test: Connectivity ......................... SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\SERVER Starting test: Replications [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: DC=ForestDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=ForestDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: DC=DomainDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=DomainDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: CN=Schema,CN=Configuration,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: CN=Schema,CN=Configuration,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. ......................... SERVER passed test Replications Starting test: NCSecDesc ......................... SERVER passed test NCSecDesc Starting test: NetLogons ......................... SERVER passed test NetLogons Starting test: Advertising ......................... SERVER passed test Advertising Starting test: KnowsOfRoleHolders ......................... SERVER passed test KnowsOfRoleHolders Starting test: RidManager ......................... SERVER passed test RidManager Starting test: MachineAccount ......................... SERVER passed test MachineAccount Starting test: Services ......................... SERVER passed test Services Starting test: ObjectsReplicated ......................... SERVER passed test ObjectsReplicated Starting test: frssysvol ......................... SERVER passed test frssysvol Starting test: frsevent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. ......................... SERVER failed test frsevent Starting test: kccevent ......................... SERVER passed test kccevent Starting test: systemlog An Error Event occured. EventID: 0x80001778 Time Generated: 05/04/2012 14:05:39 Event String: The previous system shutdown at 1:26:31 PM on An Error Event occured. EventID: 0x825A0011 Time Generated: 05/04/2012 14:07:45 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:13:40 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:25 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:25 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:38 (Event String could not be retrieved) An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:16:14 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:16:14 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0x825A0011 Time Generated: 05/04/2012 14:22:57 (Event String could not be retrieved) An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:22:59 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:22:59 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Generate Activation Context failed for ......................... SERVER failed test systemlog Starting test: VerifyReferences ......................... SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : icmcpk Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Running enterprise tests on : icmcpk.local Starting test: Intersite ......................... icmcpk.local passed test Intersite Starting test: FsmoCheck ......................... icmcpk.local passed test FsmoCheck ---------------------- File-Server ---------------------- C:\Users\Administrator.ICMCPK>dcdiag Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = FILE-SERVER * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\FILE-SERVER Starting test: Connectivity ......................... FILE-SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\FILE-SERVER Starting test: Advertising Warning: DsGetDcName returned information for \\Server.icmcpk.local, when we were trying to reach FILE-SERVER. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... FILE-SERVER failed test Advertising Starting test: FrsEvent ......................... FILE-SERVER passed test FrsEvent Starting test: DFSREvent ......................... FILE-SERVER passed test DFSREvent Starting test: SysVolCheck ......................... FILE-SERVER passed test SysVolCheck Starting test: KccEvent ......................... FILE-SERVER passed test KccEvent Starting test: KnowsOfRoleHolders ......................... FILE-SERVER passed test KnowsOfRoleHolders Starting test: MachineAccount ......................... FILE-SERVER passed test MachineAccount Starting test: NCSecDesc Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=ForestDnsZones,DC=icmcpk,DC=local Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=DomainDnsZones,DC=icmcpk,DC=local ......................... FILE-SERVER failed test NCSecDesc Starting test: NetLogons Unable to connect to the NETLOGON share! (\\FILE-SERVER\netlogon) [FILE-SERVER] An net use or LsaPolicy operation failed with error 67, The network name cannot be found.. ......................... FILE-SERVER failed test NetLogons Starting test: ObjectsReplicated ......................... FILE-SERVER passed test ObjectsReplicated Starting test: Replications ......................... FILE-SERVER passed test Replications Starting test: RidManager ......................... FILE-SERVER passed test RidManager Starting test: Services ......................... FILE-SERVER passed test Services Starting test: SystemLog An Error Event occurred. EventID: 0x00000469 Time Generated: 05/04/2012 14:01:10 Event String: The processing of Group Policy failed because of lack of network con nectivity to a domain controller. This may be a transient condition. A success m essage would be generated once the machine gets connected to the domain controll er and Group Policy has succesfully processed. If you do not see a success messa ge for several hours, then contact your administrator. An Warning Event occurred. EventID: 0x8000A001 Time Generated: 05/04/2012 14:07:11 Event String: The Security System could not establish a secured connection with th e server ldap/icmcpk.local/[email protected]. No authentication protocol was available. An Warning Event occurred. EventID: 0x00000BBC Time Generated: 05/04/2012 14:30:34 Event String: Windows Defender Real-Time Protection agent has detected changes. Mi crosoft recommends you analyze the software that made these changes for potentia l risks. You can use information about how these programs operate to choose whet her to allow them to run or remove them from your computer. Allow changes only if you trust the program or the software publisher. Windows Defender can't undo changes that you allow. An Warning Event occurred. EventID: 0x00000BBC Time Generated: 05/04/2012 14:30:36 Event String: Windows Defender Real-Time Protection agent has detected changes. Mi crosoft recommends you analyze the software that made these changes for potentia l risks. You can use information about how these programs operate to choose whet her to allow them to run or remove them from your computer. Allow changes only if you trust the program or the software publisher. Windows Defender can't undo changes that you allow. ......................... FILE-SERVER failed test SystemLog Starting test: VerifyReferences ......................... FILE-SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : icmcpk Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Running enterprise tests on : icmcpk.local Starting test: LocatorCheck ......................... icmcpk.local passed test LocatorCheck Starting test: Intersite ......................... icmcpk.local passed test Intersite --------------------- WDS-Server --------------------- C:\Users\Administrator.ICMCPK>dcdiag Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = WDS-SERVER * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\WDS-SERVER Starting test: Connectivity ......................... WDS-SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\WDS-SERVER Starting test: Advertising Warning: DsGetDcName returned information for \\Server.icmcpk.local, when we were trying to reach WDS-SERVER. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... WDS-SERVER failed test Advertising Starting test: FrsEvent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. ......................... WDS-SERVER passed test FrsEvent Starting test: DFSREvent ......................... WDS-SERVER passed test DFSREvent Starting test: SysVolCheck ......................... WDS-SERVER passed test SysVolCheck Starting test: KccEvent ......................... WDS-SERVER passed test KccEvent Starting test: KnowsOfRoleHolders ......................... WDS-SERVER passed test KnowsOfRoleHolders Starting test: MachineAccount ......................... WDS-SERVER passed test MachineAccount Starting test: NCSecDesc Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=ForestDnsZones,DC=icmcpk,DC=local Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=DomainDnsZones,DC=icmcpk,DC=local ......................... WDS-SERVER failed test NCSecDesc Starting test: NetLogons Unable to connect to the NETLOGON share! (\\WDS-SERVER\netlogon) [WDS-SERVER] An net use or LsaPolicy operation failed with error 67, The network name cannot be found.. ......................... WDS-SERVER failed test NetLogons Starting test: ObjectsReplicated ......................... WDS-SERVER passed test ObjectsReplicated Starting test: Replications ......................... WDS-SERVER passed test Replications Starting test: RidManager ......................... WDS-SERVER passed test RidManager Starting test: Services ......................... WDS-SERVER passed test Services Starting test: SystemLog An Error Event occurred. EventID: 0x0000041E Time Generated: 05/04/2012 14:02:55 Event String: The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name Sysytem (DNS) is configured and working correctly. An Error Event occurred. EventID: 0x0000041E Time Generated: 05/04/2012 14:08:33 Event String: The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name Sysytem (DNS) is configured and working correctly. ......................... WDS-SERVER failed test SystemLog Starting test: VerifyReferences ......................... WDS-SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : icmcpk Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Running enterprise tests on : icmcpk.local Starting test: LocatorCheck ......................... icmcpk.local passed test LocatorCheck Starting test: Intersite ......................... icmcpk.local passed test Intersite

  Read the article

• Oracle Storage Implementation Boot Camp: ZFS Storage Appliance and Flash

  - by mseika

  Oracle Storage Implementation Boot Camp: ZFS Storage Appliance and Flash Thursday 20th September 9.30 – 16.30 This is 1-day, face-to-face training is designed for your Storage Implementation Specialists and will help them in their path to Specialisation, as they prepare for the Storage Implementations Assessments for ZFSSA. Please read carefully the notes below on the required equipment for attendees. Agenda Module 1: Product Overview Module 2: Installation and Configuration ZFS Lab 1: Installation Module 3: Clustering Module 4: File and Data Services ZFS Lab 2: Creating Projects ZFS Lab 3: Creating a Share ZFS Lab 4: Snapshots and Clones ZFS Lab 5: CLI Overview Module 5: Maintenance ZFS Lab 6: Dashboard overview Module 6: Analytics ZFS Lab 7: Analytics Prerequisites for attendees Provide basic administration support for the Solaris OS and/or Windows Desktop/Server OS Understand the fundamentals of data storage administration Understand the fundamentals of Transmission Control Protocol/Internet Protocol (TCP/IP) networking and administration Troubleshoot server and network system software and hardware IMPORTANT: Equipment that attendees will have to bring to the class The attendees must bring their own laptops and have successfully installed the Virtual Box instance and the 7000 Series Simulator. To download Virtual Box and the Simulator click here. Attendees must have the Simulator running in advance of the class. For technical support on the download/installation of the Simulator, please send email to [email protected] Please register here

  Read the article

• ifcfg-eth* on CentOS 6.x, but for IPv6 only?

  - by Ray Hoffman

  Could someone kindly provide a skeleton ifcfg-eth0:[X] for creating an alias with a IPv6 address and no IPv4 address? Or, alternatively, what's the IPv6 equivalent of this: in /etc/sysconfig/network-scripts/ifcfg-eth0:1 DEVICE=eth0:1 ONBOOT=yes BOOTPROTO=static IPADDR=42.69.66.66 NETMASK=255.255.255.0 Or does this not even make sense in IPv6 space? I know that I can use, for example: IPV6INIT=yes IPV6ADDR=2600:4200::6900:6666:dead:beef But then do I need to specify that there is no IPv4 address associated with this alias? If so, how? And do I need to also specify the IPV6_DEFAULTGW? Or can it piggyback on the eth0 (unaliased) gateway, which is specifed, like with IPv4 aliases? EDIT: Answered my own question! The easiest way to accomplish this seems to be not to create an alias as with IPV4, but to specify, for example, IPV6ADDR_SECONDARIES=2600:4200::6900:6666:dead:beef on the script for the base interface, e.g. ifcfg-eth0.

  Read the article

• Restrict IPMI access on Dell BMC and iDRAC to an allowed IP range

  - by edgester

  I'm trying to secure the iDRAC's and BMC's on some of my Dell servers (R210, R410, R510). I want to restrict access to IPMI commands to only a few IP addresses. I've successfully restricted access to the iDrac using the instructions from http://support.dell.com/support/edocs/software/smdrac3/idrac/idrac10mono/en/ug/html/racugc2d.htm#wp1181529 , but the IP restrictions do not affect IPMI. A separate management network is not practical at this time because of lack or ports and some Dell BMC's don't offer a separate port. I'm told by my networking group that our switches don't support trunking, so using the vlan tagging is not an option either. Is there a way restrict the IPMI access to a list of allowed addresses? FYI, for various reasons, I have a mix of Dell servers with BMC's, iDrac Express and iDrac enterprise management features.

  Read the article

• links for 2010-06-03

  - by Bob Rhubart

  @rluttikhuizen: Fault handling in Oracle SOA Suite 11g "When it comes to technical faults," says  Oracle ACE Ronald van Luttikhuizen, "you probably do not want to design error handling in the process itself." (tags: soa oracleace oracle otn) Adrian Campbell: Enterprise Architecture and Zombies EA blogger Adrian Campbell invokes Harry Potter, the Lord of the Rings, Black Adder, and "Pride and Prejudice and Zombies" in this interpretation of Gartner's 10 EA pitfalls. (tags: entarch zombies gartner) Nathalie Roman: Oracle Forms -- alive and kicking Oracle ACE Director Nathalie Roman offers details on a recent Oracle Forms Modernization seminar.  (tags: oracle otn oracleace fusionmiddleware soa) Trond-Arne Undheim: Is Openness at the heart of the EU Digital Agenda? Trond-Arne Undheim shares some insight into the upcoming OpenForum Europe Summit 2010, to be held in Brussels. (tags: oracle otn entarch architect) Chris Raby: Oracle Financial Analytics Presentations and Photos Chris Raby shares details on Rittman Mead's series of seminars that combine the company's in-depth technical knowledge with a greater focus on the business perspective.  (tags: entarch bi architect oracle otn) June Oracle Technology Network NEW Member Benefits - books books and more books!!! Details on how OTN members can get discounts on books from APress, CRC, Pearson, and Packt Publishing.  (tags: oracle otn community books discounts) Manoj Neelapu: Oracle Service Bus + SOA in same server Manoj Neelapu's  tutorial covers on how to do create a domain in which SOA and Oracle Service Bus run in a single JVM . (tags: oracle otn soa architect)

  Read the article

• What is recommended minimum object size for gzip performance benefits?

  - by utt73

  I'm working on improving page speed display times, and one of the methods is to gzip content from the webserver. Google recommends: Note that gzipping is only beneficial for larger resources. Due to the overhead and latency of compression and decompression, you should only gzip files above a certain size threshold; we recommend a minimum range between 150 and 1000 bytes. Gzipping files below 150 bytes can actually make them larger. We serve our content through Akamai, using their network for a proxy and CDN. What they've told me: Following up on your question regarding what is the minimum size Akamai will compress the requested object when sending it to the end user: The minimum size is 860 bytes. My reply: What is the reason(s) for why Akamai's minimum size is 860 bytes? And why, for example, is this not the case for files Akamai serves for facebook? (see below) Google recommends to gzip more agressively. And that seems appropriate on our site where the most frequent hits, by far, are AJAX calls that are <860 bytes. Akamai's response: The reasons 860 bytes is the minimum size for compression is twofold: (1) The overhead of compressing an object under 860 bytes outweighs performance gain. (2) Objects under 860 bytes can be transmitted via a single packet anyway, so there isn't a compelling reason to compress them. So I'm here for some fact checking. Is the 860 byte limit due to packet size the end of this reasoning? Why would high traffic sites push this down to the 150 byte limit... just to save on bandwidth costs (since CDNs base their charges on bandwith offloaded from origin), or is there a performance gain in doing so?

  Read the article

• HP ML350G6 running hyper-V 2008 r2 resets itself every 2 hours

  - by GT

  The system started resetting itself exactly every 2 hours. These are the messages in the iLO2 log: Informational iLO 2 03/07/2010 20:40 03/07/2010 20:40 1 Server power restored. Caution iLO 2 03/07/2010 20:40 03/07/2010 20:40 1 Server reset. It's not an ASR reset (that would show in the log) Redundant power supplies, swapped but no change. Turned off all virtual machines (i.e. now only running hypervisor) but not OK Boot HP smartstart diagnostics disk, ALL OK Diagnostic disk reports no errors Went back to booting Hypervisor and the problem is back. Seems the hyper-V system disk has got a time based program (virus) causing the reset. I thought the hypervisor had a small attack surface and should be OK. All virtual machines (SBS2008, Win7 and Win XP) and network computers are protected with TrendMicro WFBS. I am about to rebuild the disk (I have backups) but wondered if there were any suggestions to try first???

  Read the article

• HP ML350G6 running hyper-V 2008 r2 resets itself every 2 hours

  - by GT

  The system started resetting itself exactly every 2 hours. These are the messages in the iLO2 log: Informational iLO 2 03/07/2010 20:40 03/07/2010 20:40 1 Server power restored. Caution iLO 2 03/07/2010 20:40 03/07/2010 20:40 1 Server reset. It's not an ASR reset (that would show in the log) Redundant power supplies, swapped but no change. Turned off all virtual machines (i.e. now only running hypervisor) but not OK Boot HP smartstart diagnostics disk, ALL OK Diagnostic disk reports no errors Went back to booting Hypervisor and the problem is back. Seems the hyper-V system disk has got a time based program (virus) causing the reset. I thought the hypervisor had a small attack surface and should be OK. All virtual machines (SBS2008, Win7 and Win XP) and network computers are protected with TrendMicro WFBS. I am about to rebuild the disk (I have backups) but wondered if there were any suggestions to try first???

  Read the article

• Dedicated NIC or dedicated port for iSCSI?

  - by Newt

  When spec'ing and configuring a machine that will utilise shared iSCSI storage, I've read a lot of documentation which suggests a dedicated network adapter should be used for iSCSI communication. That makes a lot of sense and I have no problem with it. The question I do have, is this - should that suggestion be taken to mean that a separate physical NIC should be used, or will a dedicated port/ports on a dual/quad port NIC be just as good? My suspicion is that simply using dedicated port(s) on a shared NIC would be just as good. Any input greatly appreciated.

  Read the article

• Demonstration VM BIC2g 2013-10 Partner Edition for Download

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 UPDATED ! The “BIC2g” demo VM (now version 2013-10) is downloadable from our BIC2g Beehive Online Workspace portal for OPN member partners. Compared to the prior version, Bic2g 2013-04, the new Bic2g 2013-10 has: OBIEE was upgraded from 11.1.1.7.0 to 11.1.1.7.1. with BI Mobile Application Designer (BIMAD) added. TimesTen was upgraded from 11.2.2.3.0 to 11.2.2.5.0 ODI Client 11.1.1.7.0 was installed, including a Standalone agent and empty repositories, and the BI Applications 11g ODI Repositories were included (BIAPPS_11g) Informatica and DAC were removed from image There are additional demos for BI-Apps and for Endeca. The compact deployment of EPM is installed and configured, including: Hyperion Foundation, Essbase, Essbase Studio, Essbase Administration Services, Provider Services, Calculation Manager, Planning, Reporting and Analysis, Financial Reporting, Web Analysis, and Workspace. The access details, for OPN member partners only, to get added to the BIC2G Beehive Online Workspace portal are shown from this page @ BI Solutions Engineering Partner Portal. This Oracle Business Intelligence Linux VM virtual appliance (“BIC2g”) was developed to support Oracle OBI, BI-Apps and EPM Hyperion sales and Oracle partners in product demonstrations, training activities and POC activities.  If you do not need BI-Apps, then there is a slightly smaller VM OBI Sample-App you can get from OTN: see @ Oracle BI and EPM Demonstration SampleApp V309 on OTN. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

  Read the article

• mac osx cannot connect to windows 7 machine

  - by Binary X

  I have a Mac OSX (Snow Leopard 10.6.6) setup on a network with several Windows 7 machines. When trying to place a large file on a Windows share the connection to the Windows share gets lost and I am unable to reconnect until I reboot the Mac. I know this is on the Windows side because the Mac can connect and transfer files to Server 2008 and XP without issue. Looking in the log file I see this message SharePointBrowser::handleOpenCallBack returned 12 I have tried restarting the com.apple.netauth.sysagent service but that did not resolve the situation. I can do an nslookup to the Windows 7 machine, but trying to ping the machine by hostname always gives a hostname lookup failure (I can ping via IP address). I cannot connect to the machine via IP adress either. Any help would be appreciated.

  Read the article

• Cannot access virtual machine via ping from the physical host machine

  - by Kenni

  I'm installing a FreeBSD Server on VirtualBox. I set up the IP address (192.168.10.5) for the virtual server to run a mail server and the host computer(Windows 7) with 192.168.10.184. The two machines cannot communicate or connect to each other. I cannot ping from the virtual machine to the host and vice versa. The host machine connects to a LAN. I want the mail server to run frm a VMachine. I think it's a problem with the network configuration of the virtual machine.

  Read the article

• Fortigate - Accessing a Virtual Server address from several interfaces

  - by Jeremy G

  I am setting up a new application in its own DMZ on our Fortigate 300C firewalls. I have defined a load-balancing configuration for part of the application, and this works fine for traffic coming in from our internal network. However, I would also like this application to be reachable from other DMZs, for inter-application traffic, and from the SSL VPN interface. I can't seem to define the required policy, and it seems this is due to Virtual Servers being bound to the client interface on the Fortigate rather than the server interface (and so my virtual IP is not accessible from any of these other interfaces) Does anyone have an idea how I might go about this ? I guess I could create other virtual IPs for each interface, but this gets complicated to handle as clients need to change the address they use depending on how they are connecting. Thanks, Jeremy G

  Read the article

• Wifi ap finder/selector for windows 7

  - by wag2639

  Is there wifi finder program for windows 7 that can let me choose specific access points to connect to? In my school, the wifi network uses the same SSID for numerous access points and usually the default wifi finder in Windows 7 connects to the first one. Even if it connects to the closest one with the best signal, there are times when a specific access point will not work. Machine: Lenovo IdeaPad S10-2 running Windows 7 (32bit) Note: On my ThinkPad, I've got access connection that does the job but that didn't seem to work on the IdeaPad the last time I tried.

  Read the article

• CheckPoint VPN-1 SecureClient inability to navigate behind a Linksys WAG300N

  - by AndreaTrasatti

  I have a Linksys WAG300N, I'm accessing my LAN with Wifi and everything works fine on my Windows 7 Enterprise laptop. When I try to connect to my company's VPN the connection succeeds, but I cannot access any internet site either within my work network or public site like Yahoo or Google. In my Linksys control panel I already verified all types of VPNs are enable to passthrough. Normal IPSec and Windows VPN worked in the past without any problems. CheckPoint seems to have a solution, but I do not have the ability to change the IP in my client and of course using another NAT device in between is not a solution for me. Edit: adding link to the Checkpoint solution, https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk26189

  Read the article

• 10 Reasons Why Java is the Top Embedded Platform

  - by Roger Brinkley

  With the release of Oracle ME Embedded 3.2 and Oracle Java Embedded Suite, Java is now ready to fully move into the embedded developer space, what many have called the "Internet of Things". Here are 10 reasons why Java is the top embedded platform. 1. Decouples software development from hardware development cycle Development is typically split between both hardware and software in a traditional design flow . This leads to complicated co-design and requires prototype hardware to be built. This parallel and interdependent hardware / software design process typically leads to two or more re-development phases. With Embedded Java, all specific work is carried out in software, with the (processor) hardware implementation fully decoupled. This with eliminate or at least reduces the need for re-spins of software or hardware and the original development efforts can be carried forward directly into product development and validation. 2. Development and testing can be done (mostly) using standard desktop systems through emulation Because the software and hardware are decoupled it now becomes easier to test the software long before it reaches the hardware through hardware emulation. Emulation is the ability of a program in an electronic device to imitate another program or device. In the past Java tools like the Java ME SDK and the SunSPOTs Solarium provided developers with emulation for a complete set of mobile telelphones and SunSpots. This often included network interaction or in the case of SunSPOTs radio communication. What emulation does is speed up the development cycle by refining the software development process without the need of hardware. The software is fixed, redefined, and refactored without the timely expense of hardware testing. With tools like the Java ME 3.2 SDK, Embedded Java applications can be be quickly developed on Windows based platforms. In the end of course developers should do a full set of testing on the hardware as incompatibilities between emulators and hardware will exist, but the amount of time to do this should be significantly reduced. 3. Highly productive language, APIs, runtime, and tools mean quick time to market Charles Nutter probably said it best in twitter blog when he tweeted, "Every time I see a piece of C code I need to port, my heart dies a little. Then I port it to 1/4 as much Java, and feel better." The Java environment is a very complex combination of a Java Virtual Machine, the Java Language, and it's robust APIs. Combine that with the Java ME SDK for small devices or just Netbeans for the larger devices and you have a development environment where development time is reduced significantly meaning the product can be shipped sooner. Of course this is assuming that the engineers don't get slap happy adding new features given the extra time they'll have.  4. Create high-performance, portable, secure, robust, cross-platform applications easily The latest JIT compilers for the Oracle JVM approach the speed of C/C++ code, and in some memory allocation intensive circumstances, exceed it. And specifically for the embedded devices both ME Embedded and SE Embedded have been optimized for the smaller footprints.  In portability Java uses Bytecode to make the language platform independent. This creates a write once run anywhere environment that allows you to develop on one platform and execute on others and avoids a platform vendor lock in. For security, Java achieves protection by confining a Java program to a Java execution environment and not allowing it to access other parts of computer.  In variety of systems the program must execute reliably to be robust. Finally, Oracle Java ME Embedded is a cross-industry and cross-platform product optimized in release version 3.2 for chipsets based on the ARM architectures. Similarly Oracle Java SE Embedded works on a variety of ARM V5, V6, and V7, X86 and Power Architecture Linux. 5. Java isolates your apps from language and platform variations (e.g. C/C++, kernel, libc differences) This has been a key factor in Java from day one. Developers write to Java and don't have to worry about underlying differences in the platform variations. Those platform variations are being managed by the JVM. Gone are the C/C++ problems like memory corruptions, stack overflows, and other such bugs which are extremely difficult to isolate. Of course this doesn't imply that you won't be able to get away from native code completely. There could be some situations where you have to write native code in either assembler or C/C++. But those instances should be limited. 6. Most popular embedded processors supported allowing design flexibility Java SE Embedded is now available on ARM V5, V6, and V7 along with Linux on X86 and Power Architecture platforms. Java ME Embedded is available on system based on ARM architecture SOCs with low memory footprints and a device emulation environment for x86/Windows desktop computers, integrated with the Java ME SDK 3.2. A standard binary of Oracle Java ME Embedded 3.2 for ARM KEIL development boards based on ARM Cortex M-3/4 (KEIL MCBSTM32F200 using ST Micro SOC STM32F207IG) will soon be available for download from the Oracle Technology Network (OTN). 7. Support for key embedded features (low footprint, power mgmt., low latency, etc) All embedded devices by there very nature are constrained in some way. Economics may dictate a device with a less RAM and ROM. The CPU needs can dictate a less powerful device. Power consumption is another major resource in some embedded devices as connecting to consistent power source not always desirable or possible. For others they have to constantly on. Often many of these systems are headless (in the embedded space it's almost always Halloween).  For memory resources ,Java ME Embedded can run in environment as low as 130KB RAM/350KB ROM for a minimal, customized configuration up to 700KB RAM/1500KB ROM for the full, standard configuration. Java SE Embedded is designed for environments starting at 32MB RAM/39MB  ROM. Key functionality of embedded devices such as auto-start and recovery, flexible networking are fully supported. And while Java SE Embedded has been optimized for mid-range to high-end embedded systems, Java ME Embedded is a Java runtime stack optimized for small embedded systems. It provides a robust and flexible application platform with dedicated embedded functionality for always-on, headless (no graphics/UI), and connected devices. 8. Leverage huge Java developer ecosystem (expertise, existing code) There are over 9 million developers in world that work on Java, and while not all of them work on embedded systems, their wealth of expertise in developing applications is immense. In short, getting a java developer to work on a embedded system is pretty easy, you probably have a java developer living in your subdivsion.  Then of course there is the wealth of existing code. The Java Embedded Community on Java.net is central gathering place for embedded Java developers. Conferences like Embedded Java @ JavaOne and the a variety of hardware vendor conferences like Freescale Technlogy Forums offer an excellent opportunity for those interested in embedded systems. 9. Easily create end-to-end solutions integrated with Java back-end services In the "Internet of Things" things aren't on an island doing an single task. For instance and embedded drink dispenser doesn't just dispense a beverage, but could collect money from a credit card and also send information about current sales. Similarly, an embedded house power monitoring system doesn't just manage the power usage in a house, but can also send that data back to the power company. In both cases it isn't about the individual thing, but monitoring a collection of  things. How much power did your block, subdivsion, area of town, town, county, state, nation, world use? How many Dr Peppers were purchased from thing1, thing2, thingN? The point is that all this information can be collected and transferred securely  (and believe me that is key issue that Java fully supports) to back end services for further analysis. And what better back in service exists than a Java back in service. It's interesting to note that on larger embedded platforms that support the Java Embedded Suite some of the analysis might be done on the embedded device itself as JES has a glassfish server and Java Database as part of the installation. The result is an end to end Java solution. 10. Solutions from constrained devices to server-class systems Just take a look at some of the embedded Java systems that have already been developed and you'll see a vast range of solutions. Livescribe pen, Kindle, each and every Blu-Ray player, Cisco's Advanced VOIP phone, KronosInTouch smart time clock, EnergyICT smart metering, EDF's automated meter management, Ricoh Printers, and Stanford's automated car  are just a few of the list of embedded Java implementation that continues to grow. Conclusion Now if your a Java Developer you probably look at some of the 10 reasons and say "duh", but for the embedded developers this is should be an eye opening list. And with the release of ME Embedded 3.2 and the Java Embedded Suite the embedded developers life is now a whole lot easier. For the Java developer your employment opportunities are about to increase. For both it's a great time to start developing Java for the "Internet of Things".

  Read the article

• The “AfterDark” Reception Is Back!

  - by Kristin Rose

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} This year, the OPN Exchange “AfterDark” Reception is moving to new heights! Join us on the 5th floor of the Metreon building in San Francisco for this exclusive ‘VIP’ event. The reception will be held from 7:30 p.m. – 10 p.m. on Sunday, September 30th. Enjoy the smooth sounds of Macy Gray over a cocktail, as you network the night away and watch the 2012 live Music Festival performances from above! Best of all, this event is exclusive and free to all Oracle PartnerNetwork Exchange attendees! So come mix and mingle with us as we kick-off Oracle OpenWorld 2012 with great conversation and music! See You After Dark! The OPN Communications Team

  Read the article

• OpenVPN performance: how many concurrent clients are possible?

  - by Steffen Müller

  I am evaluating a system for a client where many OpenVPN clients connect to a OpenVPN server. "Many" means 50000 - 1000000. Why do I do that? The clients are distributed embedded systems, each sitting behind the system owners dsl router. The server needs to be able to send commands to the clients. My first naive approach is to make the clients connect to the server via an openvpn network. This way, the secure communication tunnel can be used in both directions. This means that all clients are always connected to the server. There are many clients summing up over the years. The question is: does the OpenVPN server explode when reaching a certain number of clients? I am already aware of a maximum TCP connection number limit, therefore (and for other reasons) the VPN would have to use UDP transport. OpenVPN gurus, what is your opinion?

  Read the article

• Failure to toubleshoot a juju charm deployment

  - by Bruno Pereira

  My environments.yaml looks like this: environments: test: type: local control-bucket: juju-a14dfae3830142d9ac23c499395c2785999 admin-secret: 6608267bbd6b447b8c90934167b2a294999 default-series: oneiric juju-origin: distro data-dir: /home/bruno/projects/juju juju bootstrap runs perfect: 2011-11-22 19:19:31,999 INFO Bootstrapping environment 'test' (type: local)... 2011-11-22 19:19:32,004 INFO Checking for required packages... 2011-11-22 19:19:33,584 INFO Starting networking... 2011-11-22 19:19:34,058 INFO Starting zookeeper... 2011-11-22 19:19:34,283 INFO Starting storage server... 2011-11-22 19:19:40,051 INFO Initializing zookeeper hierarchy 2011-11-22 19:19:40,247 INFO Starting machine agent (origin: distro)... [sudo] password for bruno: 2011-11-22 19:23:16,054 INFO Environment bootstrapped 2011-11-22 19:23:16,079 INFO 'bootstrap' command finished successfully Deploy from a known good charm is accepted (tried it with one that I am trying to create): juju deploy --repository=/home/bruno/projects/charms_repo/ local:teamspeak 2011-11-22 19:28:49,929 INFO Charm deployed as service: 'teamspeak' 2011-11-22 19:28:49,962 INFO 'deploy' command finished successfully After this I can see that juju debug-log shows activity and I can see the network indicator going on and off and activity on my hard-disk. Wait... Looking at juju status I get: services: teamspeak: charm: local:oneiric/teamspeak-1 relations: {} units: teamspeak/0: machine: 0 public-address: 192.168.122.226 relations: {} state: start_error juju debug-log does not help and I have no files under /var/log/juju or /var/lib/juju. Last juju debug-log only shows this: 2011-11-22 19:45:20,790 Machine:0: juju.agents.machine DEBUG: Units changed old:set(['wordpress/0']) new:set(['wordpress/0', 'teamspeak/0']) 2011-11-22 19:45:20,823 Machine:0: juju.agents.machine DEBUG: Starting service unit: teamspeak/0 ... 2011-11-22 19:45:21,137 Machine:0: juju.agents.machine DEBUG: Downloading charm local:oneiric/teamspeak-1 to /home/bruno/projects/juju/bruno-test/charms 2011-11-22 19:45:22,115 Machine:0: juju.agents.machine DEBUG: Starting service unit teamspeak/0 2011-11-22 19:45:22,133 Machine:0: unit.deploy INFO: Creating container teamspeak-0... 2011-11-22 19:47:04,586 Machine:0: unit.deploy INFO: Container created for teamspeak/0 2011-11-22 19:47:04,781 Machine:0: unit.deploy DEBUG: Charm extracted into container 2011-11-22 19:47:04,801 Machine:0: unit.deploy DEBUG: Starting container... 2011-11-22 19:47:07,086 Machine:0: unit.deploy INFO: Started container for teamspeak/0 2011-11-22 19:47:07,107 Machine:0: juju.agents.machine INFO: Started service unit teamspeak/0 How can I troubleshot what is happening here?

  Read the article

• Accessing apache in ubuntu 10 virtualbox guest from ubuntu 10 host

  - by Francis L

  I did the following: installed VirtualBox 3.1.6 OSE in ubuntu 10 desktop. installed ubuntu 10 server on a virtual machine in VirtualBox. select "LAMP server" and "OpenSSH server" options during the ubuntu server installation. leave network "adapter 1" of virtual machine as "NAT". use "VBoxManage" described in manual to setup port forwarding on the host (Protocol: TCP, GuestPort: 80, HostPort: 8080). verify "ExtraDataItem" have been added to "ubuntuServer1.xml" (my virtual machine name) correctly. run command "pgrep apache" in ubuntu server in virtual machine to ensure apache is running. Everything went well. But, when I try to access the apache from the browser on the host with "http://localhost:8080/", it just continue fetching with no response. Now, I'm struck! Please help! Many many thanks in advance!

  Read the article

• Locate rogue DHCP server

  - by Farseeker

  I know this is a serious long shot, but here we go. In the past week or so, for users connected to a particular switch in our network (there are four dumb switches all connected, and it only affects SOME, not all, users on the one switch) are getting DHCP addresses from a rogue DHCP server. I have physically checked every cable plugged into the switch in question to make sure that none of them have a router or wifi point attached to it. I know the IP of the DHCP server, but I cannot ping it, and it does not have a web interface. Does anyone have any suggestions on what I can do to locate it or shut it down? Unfortuantely all the switches are unmanaged, and as mentioned, there's no physical device (that I can find) plugged in to anything. It's getting critical, because it's screwing up the PXE boot of a whole bunch of thin clients.

  Read the article

• Wireless Bridge with NetGear and TP-Link

  - by Tiago Cruz

  I have a wireless NetGear WGR614 v7 (little old) router connected to the internet, but I can't get a good signal in the other end of my house. I have another new one, model TP-Link TL-WR941ND wireless router. I was able to do the stuff works using a wired cable, but now, I would like to do the same using wireless connections (bridge mode, some like WDS?) Now, the computer connected to TP LINK was able to ping my computer connected to NETGEAR, but we cannot go IP ADDRESS outside my network, only internals ones. What can I do to configure this? Is needed that BOTH wireless routers support BRIDGE mode or only one its good enough? Thanks a lot!!

  Read the article

• What is needed to use anycast IPs?

  - by coredump

  So, there're a bunch of questions on SF about the uses and how anycast IPs are cool. My approach is something more practical. What specifically I need to have to use one of those addresses? Do I need to be an AS (Autonomous System)? If I want to use an Anycast IP on my internal network, is it possible? Do I need anything special with a registrar/operator(s) to use it? Basically, if I want to use an Anycast IP address, what exactly I need, from the equipment to configuration part.

  Read the article

• screen resume works on top of VPN

  - by michael

  I connect to my network using VPN. I have screen running and 'ssh' to a server. I then kill my shell and I was able to 'resume' by 'screen -r'. This works as expect. But when I disconnect VPN and re-connect VPN, and type 'screen -r' again. I was not able to get my last screen again. And I see "Write failed: Connection reset by peer46.11 MiB | 642 KiB/s" in the screen. Can you please tell me if it possible to reconnect 'screen' if my VPN is disconnect. Thank you.

  Read the article

< Previous Page | 739 740 741 742 743 744 745 746 747 748 749 750  | Next Page >