Search Results

Search found 20283 results on 812 pages for 'security context'.

Page 749/812 | < Previous Page | 745 746 747 748 749 750 751 752 753 754 755 756  | Next Page >

• Installing Ubuntu 12.04.1 x64 with Fake RAID 1 [SOLVED]

  - by Arkadius

  I had: Software: Dual boot with Windows XP Ubuntu 10.04 LTS x32 Hardware Fake RAID 1 (mirroring) with 2x1 TB: Partition 1 - Windows Partition 2 - SWAP Partition 3 - / (root) Partition 4 - Extended Partition 5 - /home Partition 6 - /data arek@domek:/var/log/installer$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sda1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sda2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sda3 528506370 570468149 20980890 83 Linux /dev/sda4 570468150 1953118439 691325145 5 Extended /dev/sda5 570468213 675340469 52436128+ 83 Linux /dev/sda6 675340533 1953118439 638888953+ 83 Linux Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de1b9 Device Boot Start End Blocks Id System /dev/sdb1 * 63 524297339 262148638+ 7 HPFS/NTFS/exFAT /dev/sdb2 524297340 528506369 2104515 82 Linux swap / Solaris /dev/sdb3 528506370 570468149 20980890 83 Linux /dev/sdb4 570468150 1953118439 691325145 5 Extended /dev/sdb5 570468213 675340469 52436128+ 83 Linux /dev/sdb6 675340533 1953118439 638888953+ 83 Linux arek@domek:/var/log/installer$ ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 236 Oct 7 20:17 control lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha -> ../dm-0 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha1 -> ../dm-1 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha2 -> ../dm-2 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha3 -> ../dm-3 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha4 -> ../dm-4 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha5 -> ../dm-5 lrwxrwxrwx 1 root root 7 Oct 7 20:17 pdc_jhjbcaha6 -> ../dm-6 I wanted to upgrade from 10.04 x32 to 12.04 x64 using FRESH installation. So, run installation of Ubuntu 12.04.1 x64 LTS using alternate CD. During the installation I selected manual partitioning and to: - Use and Format / (root) - Use and Format SWAP - Use and Keep data on /home - Use and Keep data on /data After I clicked "Continue" I get error creating and formatting SWAP partition. I go to terminal with Alt + F2 (?) and hit enter. I discovered that there was visible RAID as only disk with NO partitions. Something like this: arek@domek:/var/log/installer$ ls -l /dev/mapper/ lrwxrwxrwx 1 root root 7 Oct 7 20:17 /dev/mapper/pdc_jhjbcaha -> ../dm-0 arek@domek:/var/log/installer$ ls -l /dev/dm* brw-rw---- 1 root disk 252, 0 Oct 7 20:17 /dev/dm-0 So I switched to log console Alt+F3 (?) and saw errors like below: Oct 7 14:02:45 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:45 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:45 anna-install: Installing dmraid-udeb Oct 7 14:02:45 anna[12599]: DEBUG: retrieving dmraid-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving libdmraid1.0.0.rc16-udeb 1.0.0.rc16-4.1ubuntu8 Oct 7 14:02:49 anna[12599]: DEBUG: retrieving kpartx-udeb 0.4.9-3ubuntu5 Oct 7 14:02:49 disk-detect: Serial ATA RAID disk(s) detected. Oct 7 14:02:55 disk-detect: Enabling dmraid support. Oct 7 14:02:55 disk-detect: RAID set "pdc_jhjbcaha" was activated Oct 7 14:02:55 HERE --> dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha Oct 7 14:02:56 check-missing-firmware: /dev/.udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: /run/udev/firmware-missing does not exist, skipping Oct 7 14:02:56 check-missing-firmware: no missing firmware in /dev/.udev/firmware-missing /run/udev/firmware-missing Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (libnewt0.52): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: DEBUG: resolver (ext2-modules): package doesn't exist (ignored) Oct 7 14:02:57 main-menu[428]: INFO: Menu item 'partman-base' selected Oct 7 14:02:57 kernel: [ 316.512999] NTFS driver 2.1.30 [Flags: R/O MODULE]. Oct 7 14:02:57 kernel: [ 316.523221] Btrfs loaded Oct 7 14:02:57 kernel: [ 316.534781] JFS: nTxBlock = 8192, nTxLock = 65536 Oct 7 14:02:57 kernel: [ 316.554749] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Oct 7 14:02:57 kernel: [ 316.555336] SGI XFS Quota Management subsystem Oct 7 14:02:58 md-devices: mdadm: No arrays found in config file or automatically Oct 7 14:02:58 partman: No matching physical volumes found Oct 7 14:02:58 partman: No volume groups found Oct 7 14:02:58 partman: Reading all physical volumes. This may take a while... Oct 7 14:02:58 partman-lvm: No volume groups found Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:02:58 partman: Error running 'tune2fs -l /dev/mapper/pdc_jhjbcaha' Oct 7 14:06:11 HERE --> partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory Oct 7 14:07:28 init: starting pid 401, tty '/dev/tty2': '-/bin/sh' Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface eth0 Oct 7 14:15:00 net/hw-detect.hotplug: Detected hotpluggable network interface lo As You can see there are 2 errors Oct 7 14:02:55 dmraid-activate: ERROR: Cannot retrieve RAID set information for pdc_jhjbcaha and Oct 7 14:06:11 partman: mkswap: can't open '/dev/mapper/pdc_jhjbcaha2': No such file or directory I looked in the internet and try to run command "dmraid -ay" and get something like that: dmraid -ay /dev/mapper/pdc_jhjbcaha -> Already activated /dev/mapper/pdc_jhjbcaha1 -> Successfully activated /dev/mapper/pdc_jhjbcaha2 -> Successfully activated /dev/mapper/pdc_jhjbcaha3 -> Successfully activated /dev/mapper/pdc_jhjbcaha4 -> Successfully activated /dev/mapper/pdc_jhjbcaha5 -> Successfully activated /dev/mapper/pdc_jhjbcaha6 -> Successfully activated Then I returned to installer with Alt+F1 (?) and click "Return" to return to partitioning menu. I did NOT change anything just selected again "Continue" and everything goes smoothly. I hope this will help someone. arkadius

  Read the article

• Polite busy-waiting with WRPAUSE on SPARC

  - by Dave

  Unbounded busy-waiting is an poor idea for user-space code, so we typically use spin-then-block strategies when, say, waiting for a lock to be released or some other event. If we're going to spin, even briefly, then we'd prefer to do so in a manner that minimizes performance degradation for other sibling logical processors ("strands") that share compute resources. We want to spin politely and refrain from impeding the progress and performance of other threads — ostensibly doing useful work and making progress — that run on the same core. On a SPARC T4, for instance, 8 strands will share a core, and that core has its own L1 cache and 2 pipelines. On x86 we have the PAUSE instruction, which, naively, can be thought of as a hardware "yield" operator which temporarily surrenders compute resources to threads on sibling strands. Of course this helps avoid intra-core performance interference. On the SPARC T2 our preferred busy-waiting idiom was "RD %CCR,%G0" which is a high-latency no-nop. The T4 provides a dedicated and extremely useful WRPAUSE instruction. The processor architecture manuals are the authoritative source, but briefly, WRPAUSE writes a cycle count into the the PAUSE register, which is ASR27. Barring interrupts, the processor then delays for the requested period. There's no need for the operating system to save the PAUSE register over context switches as it always resets to 0 on traps. Digressing briefly, if you use unbounded spinning then ultimately the kernel will preempt and deschedule your thread if there are other ready threads than are starving. But by using a spin-then-block strategy we can allow other ready threads to run without resorting to involuntary time-slicing, which operates on a long-ish time scale. Generally, that makes your application more responsive. In addition, by blocking voluntarily we give the operating system far more latitude regarding power management. Finally, I should note that while we have OS-level facilities like sched_yield() at our disposal, yielding almost never does what you'd want or naively expect. Returning to WRPAUSE, it's natural to ask how well it works. To help answer that question I wrote a very simple C/pthreads benchmark that launches 8 concurrent threads and binds those threads to processors 0..7. The processors are numbered geographically on the T4, so those threads will all be running on just one core. Unlike the SPARC T2, where logical CPUs 0,1,2 and 3 were assigned to the first pipeline, and CPUs 4,5,6 and 7 were assigned to the 2nd, there's no fixed mapping between CPUs and pipelines in the T4. And in some circumstances when the other 7 logical processors are idling quietly, it's possible for the remaining logical processor to leverage both pipelines. Some number T of the threads will iterate in a tight loop advancing a simple Marsaglia xor-shift pseudo-random number generator. T is a command-line argument. The main thread loops, reporting the aggregate number of PRNG steps performed collectively by those T threads in the last 10 second measurement interval. The other threads (there are 8-T of these) run in a loop busy-waiting concurrently with the T threads. We vary T between 1 and 8 threads, and report on various busy-waiting idioms. The values in the table are the aggregate number of PRNG steps completed by the set of T threads. The unit is millions of iterations per 10 seconds. For the "PRNG step" busy-waiting mode, the busy-waiting threads execute exactly the same code as the T worker threads. We can easily compute the average rate of progress for individual worker threads by dividing the aggregate score by the number of worker threads T. I should note that the PRNG steps are extremely cycle-heavy and access almost no memory, so arguably this microbenchmark is not as representative of "normal" code as it could be. And for the purposes of comparison I included a row in the table that reflects a waiting policy where the waiting threads call poll(NULL,0,1000) and block in the kernel. Obviously this isn't busy-waiting, but the data is interesting for reference. _table { border:2px black dotted; margin: auto; width: auto; } _tr { border: 2px red dashed; } _td { border: 1px green solid; } _table { border:2px black dotted; margin: auto; width: auto; } _tr { border: 2px red dashed; } td { background-color : #E0E0E0 ; text-align : right ; } th { text-align : left ; } td { background-color : #E0E0E0 ; text-align : right ; } th { text-align : left ; } Aggregate progress T = #worker threads Wait Mechanism for 8-T threadsT=1T=2T=3T=4T=5T=6T=7T=8 Park thread in poll() 32653347334833483348334833483348 no-op 415 831 124316482060249729303349 RD %ccr,%g0 "pause" 14262429269228623013316232553349 PRNG step 412 829 124616702092251029303348 WRPause(8000) 32443361333133483349334833483348 WRPause(4000) 32153308331533223347334833473348 WRPause(1000) 30853199322432513310334833483348 WRPause(500) 29173070315032223270330933483348 WRPause(250) 26942864294930773205338833483348 WRPause(100) 21552469262227902911321433303348

  Read the article

• JavaOne Latin America Opening Keynotes

  - by Tori Wieldt

  Originally published on blogs.oracle.com/javaone It was a great first day at JavaOne Brazil, which included the Java Strategy and Java Technical keynotes. Henrik Stahl, Senior Director, Product Management for Java opened the keynotes by saying that this is the third year for JavaOne Latin America. He explained, "You know what they say, the first time doesn't count, the second time is a habit and the third time it's a tradition!" He mentioned that he was thrilled that this is largest JavaOne in Brazil to date, and he wants next year to be larger. He said that Oracle knows Latin America is an important hub for development.  "We continually come back to Latin America because of the dedication the community has with driving the continued innovation for Java," he said. Stahl explained that Oracle and the Java community must continue to innovate and Make the Future Java together. The success of Java depends on three important factors: technological innovation, Oracle as a strong steward of Java, and community participation. "The Latin American Java Community (especially in Brazil) is a shining example of how to be positive contributor to Java," Stahl said. Next, George Saab, VP software dev, Java Platform Group at Oracle, discussed some of the recent and upcoming changes to Java. "In addition to the incremental improvements to Java 7, we have also increased the set of platforms supported by Oracle from Linux, Windows, and Solaris to now also include Mac OS X and Linux/ARM for ARM-based PCs such as the Raspberry Pi and emerging ARM based microservers."  Saab announced that EA builds for Linux ARM Hard Float ABI will be available by the end of the year.  Staffan Friberg, Product Manager, Java Platform Group, provided an overview of some of the language coming in Java 8, including Lambda, remove of PermGen, improved data and time APIs and improved security, Java 8 development is moving along. He reminded the audience that they can go to OpenJDK to see this development being done in real-time, and that there are weekly early access builds of OracleJDK 8 that developers can download and try today. Judson Althoff, Senior Vice President, Worldwide Alliances and Channels and Embedded Sales, was invited to the stage, and the audience was told that "even though he is wearing a suit, he is still pretty technical." Althoff started off with a bang: "The Internet of Things is on a collision course with big data and this is a huge opportunity for developers."  For example, Althoff said, today cars are more a data device than a mechanical device. A car embedded with sensors for fuel efficiency, temperature, tire pressure, etc. can generate a petabyte of data A DAY. There are similar examples in healthcare (patient monitoring and privacy requirements creates a complex data problem) and transportation management (sending a package around the world with sensors for humidity, temperature and light). Althoff then brought on stage representatives from three companies that are successful with Java today, first Axel Hansmann, VP Strategy & Marketing Communications, Cinterion. Mr. Hansmann explained that Cinterion, a market leader in Latin America, enables M2M services with Java. At JavaOne San Francisco, Cinterion launched the EHS5, the smallest 3g solderable module, with Java installed on it. This provides Original Equipment Manufacturers (OEMs) with a cost effective, flexible platform for bringing advanced M2M technology to market.Next, Steve Nelson, Director of Marketing for the Americas, at Freescale explained that Freescale is #1 in Embedded Processors in Wired and Wireless Communications, and #1 in Automotive Semiconductors in the Americas. He said that Java provides a mature, proven platform that is uniquely suited to meet the requirements of almost any type of embedded device. He encouraged University students to get involved in the Freescale Cup, a global competition where student teams build, program, and race a model car around a track for speed.Roberto Franco, SBTVD Forum President, SBTVD, talked about Ginga, a Java-based standard for television in Brazil. He said there are 4 million Ginga TV sets in Brazil, and they expect over 20 million TV sets to be sold by the end of 2014. Ginga is also being adopted in other 11 countries in Latin America. Ginga brings interactive services not only at TV set, but also on other devices such as tablets,  PCs or smartphones, as the main or second screen. "Interactive services is already a reality," he said, ' but in a near future, we foresee interactivity enhanced TV content, convergence with OTT services and a big participation from the audience,  all integrated on TV, tablets, smartphones and second screen devices."Before he left the stage, Nandini Ramani thanked Judson for being part of the Java community and invited him to the next Geek Bike Ride in Brazil. She presented him an official geek bike ride jersey.For the Technical Keynote, a "blue screen of death" appeared. With mock concern, Stephin Chin asked the rest of the presenters if they could go on without slides. What followed was a interesting collection of demos, including JavaFX on a tablet, a look at Project Easel in NetBeans, and even Simon Ritter controlling legos with his brainwaves! Stay tuned for more dispatches.

  Read the article

• JavaOne Latin America Opening Keynotes

  - by Tori Wieldt

  It was a great first day at JavaOne Brazil, which included the Java Strategy and Java Technical keynotes. Henrik Stahl, Senior Director, Product Management for Java opened the keynotes by saying that this is the third year for JavaOne Latin America. He explained, "You know what they say, the first time doesn't count, the second time is a habit and the third time it's a tradition!" He mentioned that he was thrilled that this is largest JavaOne in Brazil to date, and he wants next year to be larger. He said that Oracle knows Latin America is an important hub for development.  "We continually come back to Latin America because of the dedication the community has with driving the continued innovation for Java," he said. Stahl explained that Oracle and the Java community must continue to innovate and Make the Future Java together. The success of Java depends on three important factors: technological innovation, Oracle as a strong steward of Java, and community participation. "The Latin American Java Community (especially in Brazil) is a shining example of how to be positive contributor to Java," Stahl said. Next, George Saab, VP software dev, Java Platform Group at Oracle, discussed some of the recent and upcoming changes to Java. "In addition to the incremental improvements to Java 7, we have also increased the set of platforms supported by Oracle from Linux, Windows, and Solaris to now also include Mac OS X and Linux/ARM for ARM-based PCs such as the Raspberry Pi and emerging ARM based microservers."  Saab announced that EA builds for Linux ARM Hard Float ABI will be available by the end of the year.  Staffan Friberg, Product Manager, Java Platform Group, provided an overview of some of the language coming in Java 8, including Lambda, remove of PermGen, improved data and time APIs and improved security, Java 8 development is moving along. He reminded the audience that they can go to OpenJDK to see this development being done in real-time, and that there are weekly early access builds of OracleJDK 8 that developers can download and try today. Judson Althoff, Senior Vice President, Worldwide Alliances and Channels and Embedded Sales, was invited to the stage, and the audience was told that "even though he is wearing a suit, he is still pretty technical." Althoff started off with a bang: "The Internet of Things is on a collision course with big data and this is a huge opportunity for developers."  For example, Althoff said, today cars are more a data device than a mechanical device. A car embedded with sensors for fuel efficiency, temperature, tire pressure, etc. can generate a petabyte of data A DAY. There are similar examples in healthcare (patient monitoring and privacy requirements creates a complex data problem) and transportation management (sending a package around the world with sensors for humidity, temperature and light). Althoff then brought on stage representatives from three companies that are successful with Java today, first Axel Hansmann, VP Strategy & Marketing Communications, Cinterion. Mr. Hansmann explained that Cinterion, a market leader in Latin America, enables M2M services with Java. At JavaOne San Francisco, Cinterion launched the EHS5, the smallest 3g solderable module, with Java installed on it. This provides Original Equipment Manufacturers (OEMs) with a cost effective, flexible platform for bringing advanced M2M technology to market.Next, Steve Nelson, Director of Marketing for the Americas, at Freescale explained that Freescale is #1 in Embedded Processors in Wired and Wireless Communications, and #1 in Automotive Semiconductors in the Americas. He said that Java provides a mature, proven platform that is uniquely suited to meet the requirements of almost any type of embedded device. He encouraged University students to get involved in the Freescale Cup, a global competition where student teams build, program, and race a model car around a track for speed.Roberto Franco, SBTVD Forum President, SBTVD, talked about Ginga, a Java-based standard for television in Brazil. He said there are 4 million Ginga TV sets in Brazil, and they expect over 20 million TV sets to be sold by the end of 2014. Ginga is also being adopted in other 11 countries in Latin America. Ginga brings interactive services not only at TV set, but also on other devices such as tablets,  PCs or smartphones, as the main or second screen. "Interactive services is already a reality," he said, ' but in a near future, we foresee interactivity enhanced TV content, convergence with OTT services and a big participation from the audience,  all integrated on TV, tablets, smartphones and second screen devices."Before he left the stage, Nandini Ramani thanked Judson for being part of the Java community and invited him to the next Geek Bike Ride in Brazil. She presented him an official geek bike ride jersey.For the Technical Keynote, a "blue screen of death" appeared. With mock concern, Stephin Chin asked the rest of the presenters if they could go on without slides. What followed was a interesting collection of demos, including JavaFX on a tablet, a look at Project Easel in NetBeans, and even Simon Ritter controlling legos with his brainwaves! Stay tuned for more dispatches.

  Read the article

• Best Method For Evaluating Existing Software or New Software

  How many of us have been faced with having to decide on an off-the-self or a custom built component, application, or solution to integrate in to an existing system or to be the core foundation of a new system? What is the best method for evaluating existing software or new software still in the design phase? One of the industry preferred methodologies to use is the Active Reviews for Intermediate Designs (ARID) evaluation process.  ARID is a hybrid mixture of the Active Design Review (ADR) methodology and the Architectural Tradeoff Analysis Method (ATAM). So what is ARID? ARD’s main goal is to ensure quality, detailed designs in software. One way in which it does this is by empowering reviewers by assigning generic open ended survey questions. This approach attempts to remove the possibility for allowing the standard answers such as “Yes” or “No”. The ADR process ignores the “Yes”/”No” questions due to the fact that they can be leading based on how the question is asked. Additionally these questions tend to receive less thought in comparison to more open ended questions. Common Active Design Review Questions What possible exceptions can occur in this component, application, or solution? How should exceptions be handled in this component, application, or solution? Where should exceptions be handled in this component, application, or solution? How should the component, application, or solution flow based on the design? What is the maximum execution time for every component, application, or solution? What environments can this component, application, or solution? What data dependencies does this component, application, or solution have? What kind of data does this component, application, or solution require? Ok, now I know what ARID is, how can I apply? Let’s imagine that your organization is going to purchase an off-the-shelf (OTS) solution for its customer-relationship management software. What process would we use to ensure that the correct purchase is made? If we use ARID, then we will have a series of 9 steps broken up by 2 phases in order to ensure that the correct OTS solution is purchases. Phase 1 Identify the Reviewers Prepare the Design Briefing Prepare the Seed Scenarios Prepare the Materials When identifying reviewers for a design it is preferred that they be pulled from a candidate pool comprised of developers that are going to implement the design. The believe is that developers actually implementing the design will have more a vested interest in ensuring that the design is correct prior to the start of code. Design debriefing consist of a summary of the design, examples of the design solving real world examples put in to use and should be no longer than two hours typically. The primary goal of this briefing is to adequately summarize the design so that the review members could actually implement the design. In the example of purchasing an OTS product I would attempt to review my briefing prior to its distribution with the review facilitator to ensure that nothing was excluded that should have not been. This practice will also allow me to test the length of the briefing to ensure that can be delivered in an appropriate about of time. Seed Scenarios are designed to illustrate conceptualized scenarios when applied with a set of sample data. These scenarios can then be used by the reviewers in the actual evaluation of the software, All materials needed for the evaluation should be prepared ahead of time so that they can be reviewed prior to and during the meeting. Materials Included: Presentation Seed Scenarios Review Agenda Phase 2 Present ARID Present Design Brainstorm and prioritize scenarios Apply scenarios Summarize Prior to the start of any ARID review meeting the Facilitator should define the remaining steps of ARID so that all the participants know exactly what they are doing prior to the start of the review process. Once the ARID rules have been laid out, then the lead designer presents an overview of the design which typically takes about two hours. During this time no questions about the design or rational are allowed to be asked by the review panel as a standard, but they are written down for use latter in the process. After the presentation the list of compiled questions is then summarized and sent back to the lead designer as areas that need to be addressed further. In the example of purchasing an OTS product issues could arise regarding security, the implementation needed or even if this is this the correct product to solve the needed solution. After the Design presentation a brainstorming and prioritize scenarios process begins by reducing the seed scenarios down to just the highest priority scenarios.  These will then be used to test the design for suitability. Once the selected scenarios have been defined the reviewers apply the examples provided in the presentation to the scenarios. The intended output of this process is to provide code or pseudo code that makes use of the examples provided while solving the selected seed scenarios. As a standard rule, the designers of the systems are not allowed to help the review board unless they all become stuck. When this occurs it is documented and along with the reason why the designer needed to help the review panel back on track. Once all of the scenarios have been completed the review facilitator reviews with the group issues that arise during the process. Then the reviewers will be polled as to efficacy of the review experience. References: Clements, Paul., Kazman, Rick., Klien, Mark. (2002). Evaluating Software Architectures: Methods and Case Studies Indianapolis, IN: Addison-Wesley

  Read the article

• Thought Oracle Usability Advisory Board Was Stuffy? Wrong. Justification for Attending OUAB: ROI

  - by ultan o'broin

  Looking for reasons tell your boss why your organization needs to join the Oracle Usability Advisory Board or why you need approval to attend one of its meetings (see the requirements)? Try phrases such as "Continued Return on Investment (ROI)", "Increased Productivity" or "Happy Workers". With OUAB your participation is about realizing and sustaining ROI across the entire applications life-cycle from input to designs to implementation choices and integration, usage and performance and on measuring and improving the onboarding and support experience. If you think this is a boring meeting of middle-aged people sitting around moaning about customizing desktop forms and why the BlackBerry is here to stay, think again! How about this for a rich agenda, all designed to engage the audience in a thought-provoking and feedback-illiciting day of swirling interactions, contextual usage, global delivery, mobility, consumerizationm, gamification and tailoring your implementation to reflect real users doing real work in real environments.  Foldable, rollable ereader devices provide a newspaper-like UK for electronic news. Or a way to wrap silicon chips, perhaps. Explored at the OUAB Europe Meeting (photograph from Terrace Restaurant in TVP. Nom.) At the 7 December 2012 OUAB Europe meeting in Oracle Thames Valley Park, UK, Oracle partners and customers stepped up to the mic and PPT decks with a range of facts and examples to astound any UX conference C-level sceptic. Over the course of the day we covered much ground, but it was all related in a contextual, flexibile, simplication, engagement way aout delivering results for business: that means solving problems. This means being about the user and their tasks and how to make design and technology transforms work into a productive activity that users and bean counters will be excited by. The sessions really gelled for me: 1. Mobile design patterns and the powerful propositions for customers and partners offered by using the design guidance with Oracle ADF Mobile. Customers' and partners' developers existing ADF developers are now productive, efficient ADF Mobile developers applying proven UX guidance using ADF Mobile components and other Oracle Fusion Middleware in the development toolkit. You can find the Mobile UX Design Patterns and Guidance on Building Mobile Apps on OTN. 2. Oracle Voice and Apps. How this medium offers so much potentual in the enterprise and offers a window in Fusion Apps cloud webservices, Oracle RightNow NLP and Nuance technology. Exciting stuff, demoed live on a mobile phone. Stay tuned for more features and modalities and how you can tailor your own apps experience.  3. Oracle RightNow Natural Language Processing (NLP) Virtual Assistant technology (Ella): how contextual intervention and learning from users sessions delivers a great personalized UX for users interacting with Ella, a fifth generation VA to solve problems and seek knowledge. 4. BYOD Keynote: A balanced keynote address contrasting Fujitsu's explaining of the conceprt, challenges, and trends and setting the expectation that BYOD must be embraced in a flexible way,  with the resolute, crafted high security enterprise requirements that nuancing the BYOD concept and proposals with the realities of their world of water tight information and device sharing policies. Fascinating stuff, as well providing anecdotes to make us thing about out own DYOD Deployments. One size does not fit all. 5. Icon Cultural Surveys Results and Insights Arising: Ever wondered about the cultural appropriateness of icons used in software UIs and how these icons assessed for global use? Or considered that social media "Like" icons might be  unacceptable hand gestures in culture or enterprise? Or do the old world icons like Save floppy disk icons still find acceptable? Well the survey results told you. Challenges must be tested, over time, and context of use is critical now, including external factors such as the internet and social media adoption. Indeed the fears about global rejection of the face and hand icons was not borne out, and some of the more anachronistic icons (checkbooks, microphones, real-to-real tape decks, 3.5" floppies for "save") have become accepted metaphors for current actions. More importantly the findings brought into focus the reason for OUAB - engage with and illicit feedback though working groups before we build anything. 6. EReaders and Oracle iBook: What is the uptake and trends of ereaders? And how about a demo of an iBook with enterprise apps content?  Well received by the audience, the session included a live running poll of ereader usage. 7. Gamification Design Jam: Fun, hands on event for teams of Oracle staff, partners and customers, actually building gamified flows, a practice that can be applied right away by customers and partners.  8. UX Direct: A new offering of usability best practices, coming to an external website for you in 2013. FInd a real user, observe their tasks, design and approve, build and measure. Simple stuff to improve apps implications no end. 9. FUSE (an internal term only, basically Fusion Simplified Experience): demo of the new Face of Fusion Applications: inherently mobile, simple to use, social, personalizable and FAST, three great demos from the HCM, CRM and ICT world on how these UX designs can be used in different ways. So, a powerful breadth and depth of UX solutions and opporunities for customers and partners to engage with and explore how they can make their users happy and benefit their business reaping continued ROI from those apps investments. Find out more about the OUAB and how to get involved here ... 

  Read the article

• WIF-less claim extraction from ACS: SWT

  - by Elton Stoneman

  WIF with SAML is solid and flexible, but unless you need the power, it can be overkill for simple claim assertion, and in the REST world WIF doesn’t have support for the latest token formats.  Simple Web Token (SWT) may not be around forever, but while it's here it's a nice easy format which you can manipulate in .NET without having to go down the WIF route. Assuming you have set up a Relying Party in ACS, specifying SWT as the token format: When ACS redirects to your login page, it will POST the SWT in the first form variable. It comes through in the BinarySecurityToken element of a RequestSecurityTokenResponse XML payload , the SWT type is specified with a TokenType of http://schemas.xmlsoap.org/ws/2009/11/swt-token-profile-1.0 : <t:RequestSecurityTokenResponse xmlns:t="http://schemas.xmlsoap.org/ws/2005/02/trust">   <t:Lifetime>     <wsu:Created xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">2012-08-31T07:31:18.655Z</wsu:Created>     <wsu:Expires xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">2012-08-31T09:11:18.655Z</wsu:Expires>   </t:Lifetime>   <wsp:AppliesTo xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy">     <EndpointReference xmlns="http://www.w3.org/2005/08/addressing">       <Address>http://localhost/x.y.z</Address>     </EndpointReference>   </wsp:AppliesTo>   <t:RequestedSecurityToken>     <wsse:BinarySecurityToken wsu:Id="uuid:fc8d3332-d501-4bb0-84ba-d31aa95a1a6c" ValueType="http://schemas.xmlsoap.org/ws/2009/11/swt-token-profile-1.0" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> [ base64string ] </wsse:BinarySecurityToken>   </t:RequestedSecurityToken>   <t:TokenType>http://schemas.xmlsoap.org/ws/2009/11/swt-token-profile-1.0</t:TokenType>   <t:RequestType>http://schemas.xmlsoap.org/ws/2005/02/trust/Issue</t:RequestType>   <t:KeyType>http://schemas.xmlsoap.org/ws/2005/05/identity/NoProofKey</t:KeyType> </t:RequestSecurityTokenResponse> Reading the SWT is as simple as base-64 decoding, then URL-decoding the element value:     var wrappedToken = XDocument.Parse(HttpContext.Current.Request.Form[1]);     var binaryToken = wrappedToken.Root.Descendants("{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}BinarySecurityToken").First();     var tokenBytes = Convert.FromBase64String(binaryToken.Value);     var token = Encoding.UTF8.GetString(tokenBytes);     var tokenType = wrappedToken.Root.Descendants("{http://schemas.xmlsoap.org/ws/2005/02/trust}TokenType").First().Value; The decoded token contains the claims as key/value pairs, along with the issuer, audience (ACS realm), expiry date and an HMAC hash, which are in query string format. Separate them on the ampersand, and you can write out the claim values in your logged-in page:     var decoded = HttpUtility.UrlDecode(token);     foreach (var part in decoded.Split('&'))     {         Response.Write("<pre>" + part + "</pre><br/>");     } - which will produce something like this: http://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationinstant=2012-08-31T06:57:01.855Z http://schemas.microsoft.com/ws/2008/06/identity/claims/authenticationmethod=http://schemas.microsoft.com/ws/2008/06/identity/authenticationmethod/windows http://schemas.microsoft.com/ws/2008/06/identity/claims/windowsaccountname=XYZ http://schemas.xmlsoap.org/ws/2005/05/identity/claims/[email protected] http://schemas.xmlsoap.org/ws/2005/05/identity/claims/[email protected] http://schemas.microsoft.com/accesscontrolservice/2010/07/claims/identityprovider=http://fs.svc.xyz.com/adfs/services/trust Audience=http://localhost/x.y.z ExpiresOn=1346402225 Issuer=https://x-y-z.accesscontrol.windows.net/ HMACSHA256=oDCeEDDAWEC8x+yBnTaCLnzp4L6jI0Z/xNK95PdZTts= The HMAC hash lets you validate the token to ensure it hasn’t been tampered with. You'll need the token signing key from ACS, then you can re-sign the token and compare hashes. There's a full implementation of an SWT parser and validator here: How To Request SWT Token From ACS And How To Validate It At The REST WCF Service Hosted In Windows Azure, and a cut-down claim inspector on my github code gallery: ACS Claim Inspector. Interestingly, ACS lets you have a value for your logged-in page which has no relation to the realm for authentication, so you can put this code into a generic claim inspector page, and set that to be your logged-in page for any relying party where you want to check what's being sent through. Particularly handy with ADFS, when you're modifying the claims provided, and want to quickly see the results.

  Read the article

• Session Report - Java on the Raspberry Pi

  - by Janice J. Heiss

  On mid-day Wednesday, the always colorful Oracle Evangelist Simon Ritter demonstrated Java on the Raspberry Pi at his session, “Do You Like Coffee with Your Dessert?”. The Raspberry Pi consists of a credit card-sized single-board computer developed in the UK with the intention of stimulating the teaching of basic computer science in schools. “I don't think there is a single feature that makes the Raspberry Pi significant,” observed Ritter, “but a combination of things really makes it stand out. First, it's $35 for what is effectively a completely usable computer. You do have to add a power supply, SD card for storage and maybe a screen, keyboard and mouse, but this is still way cheaper than a typical PC. The choice of an ARM (Advanced RISC Machine and Acorn RISC Machine) processor is noteworthy, because it avoids problems like cooling (no heat sink or fan) and can use a USB power brick. When you add in the enormous community support, it offers a great platform for teaching everyone about computing.”Some 200 enthusiastic attendees were present at the session which had the feel of Simon Ritter sharing a fun toy with friends. The main point of the session was to show what Oracle was doing to support Java on the Raspberry Pi in a way that is entertaining and fun. Ritter pointed out that, in addition to being great for teaching, it’s an excellent introduction to the ARM architecture, and runs well with Java and will get better once it has official hard float support. The possibilities are vast.Ritter explained that the Raspberry Pi Project started in 2006 with the goal of devising a computer to inspire children; it drew inspiration from the BBC Micro literacy project of 1981 that produced a series of microcomputers created by the Acorn Computer company. It was officially launched on February 29, 2012, with a first production of 10,000 boards. There were 100,000 pre-orders in one day; currently about 4,000 boards are produced a day. Ritter described the specification as follows:* CPU: ARM 11 core running at 700MHz Broadcom SoC package Can now be overclocked to 1GHz (without breaking the warranty!) * Memory: 256Mb* I/O: HDMI and composite video 2 x USB ports (Model B only) Ethernet (Model B only) Header pins for GPIO, UART, SPI and I2C He took attendees through a brief history of ARM Architecture:* Acorn BBC Micro (6502 based) Not powerful enough for Acorn’s plans for a business computer * Berkeley RISC Project UNIX kernel only used 30% of instruction set of Motorola 68000 More registers, less instructions (Register windows) One chip architecture to come from this was… SPARC * Acorn RISC Machine (ARM) 32-bit data, 26-bit address space, 27 registers First machine was Acorn Archimedes * Spin off from Acorn, Advanced RISC MachinesNext he presented its features:* 32-bit RISC Architecture–  ARM accounts for 75% of embedded 32-bit CPUs today– 6.1 Billion chips sold last year (zero manufactured by ARM)* Abstract architecture and microprocessor core designs– Raspberry Pi is ARM11 using ARMv6 instruction set* Low power consumption– Good for mobile devices– Raspberry Pi can be powered from 700mA 5V only PSU– Raspberry Pi does not require heatsink or fanHe described the current ARM Technology:* ARMv6– ARM 11, ARM Cortex-M* ARMv7– ARM Cortex-A, ARM Cortex-M, ARM Cortex-R* ARMv8 (Announced)– Will support 64-bit data and addressingHe next gave the Java Specifics for ARM: Floating point operations* Despite being an ARMv6 processor it does include an FPU– FPU only became standard as of ARMv7* FPU (Hard Float, or HF) is much faster than a software library* Linux distros and Oracle JVM for ARM assume no HF on ARMv6– Need special build of both– Raspbian distro build now available– Oracle JVM is in the works, release date TBDNot So RISCPerformance Improvements* DSP Enhancements* Jazelle* Thumb / Thumb2 / ThumbEE* Floating Point (VFP)* NEON* Security Enhancements (TrustZone)He spent a few minutes going over the challenges of using Java on the Raspberry Pi and covered:* Sound* Vision * Serial (TTL UART)* USB* GPIOTo implement sound with Java he pointed out:* Sound drivers are now included in new distros* Java Sound API– Remember to add audio to user’s groups– Some bits work, others not so much* Playing (the right format) WAV file works* Using MIDI hangs trying to open a synthesizer* FreeTTS text-to-speech– Should work once sound works properlyHe turned to JavaFX on the Raspberry Pi:* Currently internal builds only– Will be released as technology preview soon* Work involves optimal implementation of Prism graphics engine– X11?* Once the JavaFX implementation is completed there will be little of concern to developers-- It’s just Java (WORA). He explained the basis of the Serial Port:* UART provides TTL level signals (3.3V)* RS-232 uses 12V signals* Use MAX3232 chip to convert* Use this for access to serial consoleHe summarized his key points. The Raspberry Pi is a very cool (and cheap) computer that is great for teaching, a great introduction to ARM that works very well with Java and will work better in the future. The opportunities are limitless. For further info, check out, Raspberry Pi User Guide by Eben Upton and Gareth Halfacree. From there, Ritter tried out several fun demos, some of which worked better than others, but all of which were greeted with considerable enthusiasm and support and good humor (even when he ran into some glitches).  All in all, this was a fun and lively session.

  Read the article

• How do I mount my External HDD with filesystem type errors?

  - by Snuggie

  I am a relatively new Ubuntu user and I am having some difficulty mounting my external 2TB HDD. When I first installed Linux my external HDD was working just fine, however, it has stopped working and I have a lot of important files on there that I need. Before my HDD would automatically mount and no worries. Now, however, it doesn't automatically mount and when I try to manually mount it I keep running into filesystem type errors that I can't seem to get past. Below are images that depict my step by step process of how I am trying to mount my HDD along with the errors I am receiving. If anybody has any idea what I am doing wrong or how to correct the issue I would greatly appreciate it. Step 1) Ensure the computer recognizes my external HDD. pj@PJ:~$ dmesg ... [ 5790.367910] scsi 7:0:0:0: Direct-Access WD My Passport 0748 1022 PQ: 0 ANSI: 6 [ 5790.368278] scsi 7:0:0:1: Enclosure WD SES Device 1022 PQ: 0 ANSI: 6 [ 5790.370122] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 5790.370310] ses 7:0:0:1: Attached Enclosure device [ 5790.370462] ses 7:0:0:1: Attached scsi generic sg3 type 13 [ 5792.971601] sd 7:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 5792.972148] sd 7:0:0:0: [sdb] Write Protect is off [ 5792.972162] sd 7:0:0:0: [sdb] Mode Sense: 47 00 10 08 [ 5792.972591] sd 7:0:0:0: [sdb] No Caching mode page found [ 5792.972605] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5792.975235] sd 7:0:0:0: [sdb] No Caching mode page found [ 5792.975249] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5792.987504] sdb: sdb1 [ 5792.988900] sd 7:0:0:0: [sdb] No Caching mode page found [ 5792.988911] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 5792.988920] sd 7:0:0:0: [sdb] Attached SCSI disk Step 2) Check if it mounted properly (it does not) pj@PJ:~$ df -ah Filesystem Size Used Avail Use% Mounted on /dev/sda1 682G 3.9G 644G 1% / proc 0 0 0 - /proc sysfs 0 0 0 - /sys none 0 0 0 - /sys/fs/fuse/connections none 0 0 0 - /sys/kernel/debug none 0 0 0 - /sys/kernel/security udev 2.9G 4.0K 2.9G 1% /dev devpts 0 0 0 - /dev/pts tmpfs 1.2G 928K 1.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 2.9G 156K 2.9G 1% /run/shm gvfs-fuse-daemon 0 0 0 - /home/pj/.gvfs Step 3) Try mounting manually using NTFS and VFAT (both as SDB and SDB1) pj@PJ:~$ sudo mount /dev/sdb /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb': Invalid argument The device '/dev/sdb' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount /dev/sdb1 /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount -t ntfs /dev/sdb /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb': Invalid argument The device '/dev/sdb' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount -t vfat /dev/sdb /media/Passport/ mount: wrong fs type, bad option, bad superblock on /dev/sdb, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so pj@PJ:~$ sudo mount -t ntfs /dev/sdb1 /media/Passport/ NTFS signature is missing. Failed to mount '/dev/sdb1': Invalid argument The device '/dev/sdb1' doesn't seem to have a valid NTFS. Maybe the wrong device is used? Or the whole disk instead of a partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around? pj@PJ:~$ sudo mount -t vfat /dev/sdb1 /media/Passport/ mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so

  Read the article

• Database Owner Conundrum

  - by Johnm

  Have you ever restored a database from a production environment on Server A into a development environment on Server B and had some items, such as Service Broker, mysteriously cease functioning? You might want to consider reviewing the database owner property of the database. The Scenario Recently, I was developing some messaging functionality that utilized the Service Broker feature of SQL Server in a development environment. Within the instance of the development environment resided two databases: One was a restored version of a production database that we will call "RestoreDB". The second database was a brand new database that has yet to exist in the production environment that we will call "DevDB". The goal is to setup a communication path between RestoreDB and DevDB that will later be implemented into the production database. After implementing all of the Service Broker objects that are required to communicate within a database as well as between two databases on the same instance I found myself a bit confounded. My testing was showing that the communication was successful when it was occurring internally within DevDB; but the communication between RestoreDB and DevDB did not appear to be working. Profiler to the rescue After carefully reviewing my code for any misspellings, missing commas or any other minor items that might be a syntactical cause of failure, I decided to launch Profiler to aid in the troubleshooting. After simulating the cross database messaging, I noticed the following error appearing in Profiler: An exception occurred while enqueueing a message in the target queue. Error: 33009, State: 2. The database owner SID recorded in the master database differs from the database owner SID recorded in database '[Database Name Here]'. You should correct this situation by resetting the owner of database '[Database Name Here]' using the ALTER AUTHORIZATION statement. Now, this error message is a helpful one. Not only does it identify the issue in plain language, it also provides a potential solution. An execution of the following query that utilizes the catalog view sys.transmission_queue revealed the same error message for each communication attempt: SELECT     * FROM        sys.transmission_queue; Seeing the situation as a learning opportunity I dove a bit deeper. Reviewing the database properties  The owner of a specific database can be easily viewed by right-clicking the database in SQL Server Management Studio and selecting the "properties" option. The owner is listed on the "General" page of the properties screen. In my scenario, the database in the production server was created by Frank the DBA; therefore his server login appeared as the owner: "ServerName\Frank". While this is interesting information, it certainly doesn't tell me much in regard to the SID (security identifier) and its existence, or lack thereof, in the master database as the error suggested. I pulled together the following query to gather more interesting information: SELECT     a.name     , a.owner_sid     , b.sid     , b.name     , b.type_desc FROM        master.sys.databases a     LEFT OUTER JOIN master.sys.server_principals b         ON a.owner_sid = b.sid WHERE     a.name not in ('master','tempdb','model','msdb'); This query also helped identify how many other user databases in the instance were experiencing the same issue. In this scenario, I saw that there were no matching SIDs in server_principals to the owner SID for my database. What login should be used as the database owner instead of Frank's? The system stored procedure sp_helplogins will provide a list of the valid logins that can be used. Here is an example of its use, revealing all available logins: EXEC sp_helplogins;  Fixing a hole The error message stated that the recommended solution was to execute the ALTER AUTHORIZATION statement. The full statement for this scenario would appear as follows: ALTER AUTHORIZATION ON DATABASE:: [Database Name Here] TO [Login Name]; Another option is to execute the following statement using the sp_changedbowner system stored procedure; but please keep in mind that this stored procedure has been deprecated and will likely disappear in future versions of SQL Server: EXEC dbo.sp_changedbowner @loginname = [Login Name]; .And They Lived Happily Ever After Upon changing the database owner to an existing login and simulating the inner and cross database messaging the errors have ceased. More importantly, all messages sent through this feature now successfully complete their journey. I have added the ownership change to my restoration script for the development environment.

  Read the article

• Books are Dead! Long Live the Books!

  - by smisner

  We live in interesting times with regard to the availability of technical material. We have lots of free written material online in the form of vendor documentation online, forums, blogs, and Twitter. And we have written material that we can buy in the form of books, magazines, and training materials. Online videos and training – some free and some not free – are also an option. All of these formats are useful for one need or another. As an author, I pay particular attention to the demand for books, and for now I see no reason to stop authoring books. I assure you that I don’t get rich from the effort, and fortunately that is not my motivation. As someone who likes to refer to books frequently, I am still a big believer in books and have evidence from book sales that there are others like me. If I can do my part to help others learn about the technologies I work with, I will continue to produce content in a variety of formats, including books. (You can view a list of all of my books on the Publications page of my site and my online training videos at Pluralsight.) As a consumer of technical information, I prefer books because a book typically can get into a topic much more deeply than a blog post, and can provide more context than vendor documentation. It comes with a table of contents and a (hopefully accurate) index that helps me zero in on a topic of interest, and of course I can use the Search feature in digital form. Some people suggest that technology books are outdated as soon as they get published. I guess it depends on where you are with technology. Not everyone is able to upgrade to the latest and greatest version at release. I do assume, however, that the SQL Server 7.0 titles in my library have little value for me now, but I’m certain that the minute I discard the book, I’m going to want it for some reason! Meanwhile, as electronic books overtake physical books in sales, my husband is grateful that I can continue to build my collection digitally rather than physically as the books have a way of taking over significant square footage in our house! Blog posts, on the other hand, are useful for describing the scenarios that come up in real-life implementations that wouldn’t fit neatly into a book. As many years that I have working with the Microsoft BI stack, I still run into new problems that require creative thinking. Likewise, people who work with BI and other technologies that I use share what they learn through their blogs. Internet search engines help us find information in blogs that simply isn’t available anywhere else. Another great thing about blogs, also, is the connection to community and the dialog that can ensue between people with common interests. With the trend towards electronic formats for books, I imagine that we’ll see books continue to adapt to incorporate different forms of media and better ways to keep the information current. At the moment, I wish I had a better way to help readers with my last two Reporting Services books. In the case of the Microsoft® SQL Server™ 2005 Reporting Services Step by Step book, I have heard many cases of readers having problems with the sample database that shipped on CD – either the database was missing or it was corrupt. So I’ve provided a copy of the database on my site for download from http://datainspirations.com/uploads/rs2005sbsDW.zip. Then for the Microsoft® SQL Server™ 2008 Reporting Services Step by Step book, we decided to avoid the database problem by using the AdventureWorks2008 samples that Microsoft published on Codeplex (although code samples are still available on CD). We had this silly idea that the URL for the download would remain constant, but it seems that expectation was ill-founded. Currently, the sample database is found at http://msftdbprodsamples.codeplex.com/releases/view/37109 but I have no idea how long that will remain valid. My latest books (#9 and #10 which are milestones I never anticipated), Building Integrated Business Intelligence Solutions with SQL Server 2008 R2 and Office 2010 (McGraw Hill, 2011) and Business Intelligence in Microsoft SharePoint 2010 (Microsoft Press, 2011), will not ship with a CD, but will provide all code samples for download at a site maintained by the respective publishers. I expect that the URLs for the downloads for the book will remain valid, but there are lots of references to other sites that can change or disappear over time. Does that mean authors shouldn’t make reference to such sites? Personally, I think the benefits to be gained from including links are greater than the risks of the links becoming invalid at some point. Do you think the time for technology books has come to an end? Is the delivery of books in electronic format enough to keep them alive? If technological barriers were no object, what would make a book more valuable to you than other formats through which you can obtain information?

  Read the article

• Career guidance/advice for Junior-level Software Engineer [closed]

  - by John Do

  I have quite a few questions on my mind, so please bare with me. Please don't feel obligated to answer all of them, any as you choose will do. I'd appreciate if you could share some insight on any of these. Before I begin, some context: I currently have almost two years of professional experience as a Software Engineer, mainly developing software in Java. At this point, I feel that I have reached the peak in my career growth at the current company I am at and therefore I am looking for a new job, ideally again, as a Software Engineer. I have been interviewing for the past few months casually but have not had luck with companies I have a passion for. So, in no particular order - 1) In general, what are your thoughts on having graduate degrees in CS / Software Engineering. How much does it influence a salary increase, and do you think it's beneficial when working on real-world problems? I get the sense that a graduate degree in the field is trivial unless you really have a passion for research. 2) In general, in professional practice, how often had you have to write your own data structures and "complex" algorithms from scratch? In my own work, I have found myself relying mainly on third-party frameworks and the Java standard library to implement solutions as per business requirements. What are your thoughts on this? 3) In terms of resume, I feel the most ambivalent here. I want to be able to "blemish" my resume to a certain extent so that it stands out from others', but at the same time I do not want to over-exagerate my abilities. How do you strike a balance here? For example: I say that I am proficient in Java with data structures and algorithms. This is obviously a subjective and relative statement. I've taken the classes in my undergrad, and I've applied it in my work experience. What I feel as "prociency" can be seen as junior-level to others. How do you know what to say? Most of the time, recruiters (with no technical background) will be looking for keywords that stand out. This leads me to my next question (4). 4) Just from interviewing for the past few months (and getting plenty of rejections), I've come to realize that I may not be as proficient in data structures and algorithms as I thought I was. Do you think it's a good idea to remove the "proficient in java/data structure and algorithms"? I feel that being too hoenst on the resume will impede me from scoring opportunities to even have an interview with top-notch companies. What are your thoughts? 5) What is the absolute "must-have" knowledge going into a technical interview? I've been practicing several algorithmic and data sturcture problems now, and I feel that my abilities to solve arbitrary problems efficiently has not gotten significantly better. Do you think these abilities are something innate - it's either you have in you, or you don't? How can you teach yourself to learn, if you will? 6) How easy is it to go from industry/function to the next? I work mainly with backend technologies and I'm now interested in working with the frontend, i.e javascript,jquery,php or even mobile development. In your own experience, how did you not get pidgeon holed in your career? I feel that the choices you make now ultimately decide your future. As cliche as it sounds, I think it may be true. Here's what I mean: you've worked mainly as a backend engineer, people are interested in you doing the same thing since you've already accumulated experience in that function. How do get experience in a new function if people won't accept you because you don't already have it? It's a catch 22, you see... Are side projects the only real way to help you move from one function to another that you're truly interested in? For example: I could start writing my own mobile applications, even though I've worked mainly on the backend. Thanks so much for the long read. As a relatively new engineer to the real world, I am very humble and would like those who are experienced to shed some light. Thank you so much.

  Read the article

• Pace Layering Comes Alive

  - by Tanu Sood

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Rick Beers is Senior Director of Product Management for Oracle Fusion Middleware. Prior to joining Oracle, Rick held a variety of executive operational positions at Corning, Inc. and Bausch & Lomb. With a professional background that includes senior management positions in manufacturing, supply chain and information technology, Rick brings a unique set of experiences to cover the impact that technology can have on business models, processes and organizations. Rick hosts the IT Leaders Editorial on a monthly basis. By now, readers of this column are quite familiar with Oracle AppAdvantage, a unified framework of middleware technologies, infrastructure and applications utilizing a pace layered approach to enterprise systems platforms. 1. Standardize and Consolidate core Enterprise Applications by removing invasive customizations, costly workarounds and the complexity that multiple instances creates. 2. Move business specific processes and applications to the Differentiate Layer, thus creating greater business agility with process extensions and best of breed applications managed by cross- application process orchestration. 3. The Innovate Layer contains all the business capabilities required for engagement, collaboration and intuitive decision making. This is the layer where innovation will occur, as people engage one another in a secure yet open and informed way. 4. Simplify IT by minimizing complexity, improving performance and lowering cost with secure, reliable and managed systems across the entire Enterprise. But what hasn’t been discussed is the pace layered architecture that Oracle AppAdvantage adopts. What is it, what are its origins and why is it relevant to enterprise scale applications and technologies? It’s actually a fascinating tale that spans the past 20 years and a basic understanding of it provides a wonderful context to what is evolving as the future of enterprise systems platforms. It all begins in 1994 with a book by noted architect Stewart Brand, of ’Whole Earth Catalog’ fame. In his 1994 book How Buildings Learn, Brand popularized the term ‘Shearing Layers’, arguing that any building is actually a hierarchy of pieces, each of which inherently changes at different rates. In 1997 he produced a 6 part BBC Series adapted from the book, in which Part 6 focuses on Shearing Layers. In this segment Brand begins to introduce the concept of ‘pace’. Brand further refined this idea in his subsequent book, The Clock of the Long Now, which began to link the concept of Shearing Layers to computing and introduced the term ‘pace layering’, where he proposes that: “An imperative emerges: an adaptive [system] has to allow slippage between the differently-paced systems … otherwise the slow systems block the flow of the quick ones and the quick ones tear up the slow ones with their constant change. Embedding the systems together may look efficient at first but over time it is the opposite and destructive as well.” In 2000, IBM architects Ian Simmonds and David Ing published a paper entitled A Shearing Layers Approach to Information Systems Development, which applied the concept of Shearing Layers to systems design and development. It argued that at the time systems were still too rigid; that they constrained organizations by their inability to adapt to changes. The findings in the Conclusions section are particularly striking: “Our starting motivation was that enterprises need to become more adaptive, and that an aspect of doing that is having adaptable computer systems. The challenge is then to optimize information systems development for change (high maintenance) rather than stability (low maintenance). Our response is to make it explicit within software engineering the notion of shearing layers, and explore it as the principle that systems should be built to be adaptable in response to the qualitatively different rates of change to which they will be subjected. This allows us to separate functions that should legitimately change relatively slowly and at significant cost from that which should be changeable often, quickly and cheaply.” The problem at the time of course was that this vision of adaptable systems was simply not possible within the confines of 1st generation ERP, which were conceived, designed and developed for standardization and compliance. It wasn’t until the maturity of open, standards based integration, and the middleware innovation that followed, that pace layering became an achievable goal. And Oracle is leading the way. Oracle’s AppAdvantage framework makes pace layering come alive by taking a strategic vision 20 years in the making and transforming it to a reality. It allows enterprises to retain and even optimize their existing ERP systems, while wrapping around those ERP systems three layers of capabilities that inherently adapt as needed, at a pace that’s optimal for the enterprise.

  Read the article

• Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution

  - by Kellsey Ruppel

  Siemens AG, Sector Healthcare, Increases Transparency and Improves Customer Loyalty with Web Portal Solution CUSTOMER AND PARTNER INFORMATION Customer Name – Siemens AG, Sector Healthcare Customer Revenue – 73,515 Billion Euro (2011, Siemens AG total) Customer Quote – “The realization of our complex requirements within a very short amount of time was enabled through the competent implementation partner Sapient, who fully used the  very broad scope of standard functionality provided in the Oracle WebCenter Portal, and the management of customer services, who continuously supported the project setup. ” – Joerg Modlmayr, Project Manager, Healthcare Customer Service Portal, Siemens AG The Siemens Healthcare Sector is one of the world's largest suppliers to the healthcare industry and a trendsetter in medical imaging, laboratory diagnostics, medical information technology and hearing aids. Siemens offers its customers products and solutions for the entire range of patient care from a single source – from prevention and early detection to diagnosis, and on to treatment and aftercare. By optimizing clinical workflows for the most common diseases, Siemens also makes healthcare faster, better and more cost-effective. To ensure greater transparency, increased efficiency, higher user acceptance, and additional services, Siemens AG, Sector Healthcare, replaced several existing legacy portal solutions that could not meet the company’s future needs with Oracle WebCenter Portal. Various existing portal solutions that cannot meet future demands will be successively replaced by the new central service portal, which will also allow for the efficient and intuitive implementation of new service concepts.  With Oracle, doctors and hospitals using Siemens medical solutions now have access to a central information portal that provides important information and services at just the push of a button.  Customer Name – Siemens AG, Sector Healthcare Customer URL – www.siemens.com Customer Headquarters – Erlangen, Germany Industry – Industrial Manufacturing Employees – 360,000  Challenges – Replace disparate medical service portals to meet future demands and eliminate an  unnecessarily high level of administrative work caused by heterogeneous installations Ensure portals meet current user demands to improve user-acceptance rates and increase number of total users Enable changes and expansion through standard functionality to eliminate the need for reliance on IT and reduce administrative efforts and associated high costs Ensure efficient and intuitive implementation of new service concepts for all devices and systems Ensure hospitals and clinics to transparently monitor and measure services rendered for the various medical devices and systems  Increase electronic interaction and expand services to achieve a higher level of customer loyalty Solution –  Deployed Oracle WebCenter Portal to ensure greater transparency, and as a result, a higher level of customer loyalty  Provided a centralized platform for doctors and hospitals using Siemens’ medical technology solutions that provides important information and services at the push of a button Reduced significantly the administrative workload by centralizing the solution in the new customer service portal Secured positive feedback from customers involved in the pilot program developed by design experts from Oracle partner Sapient. The interfaces were created with customer needs in mind. The first survey taken shortly after implementation came back with 2.4 points on a scale of 0-3 in the category “customer service portal intuitiveness level” Met all requirements including alignment with the Siemens Style Guide without extensive programming Implemented additional services via the portal such as benchmarking options to ensure the optimal use of the Customer Device Park Provided option for documentation of all services rendered in conjunction with the medical technology systems to ensure that the value of the services are transparent for the decision makers in the hospitals  Saved and stored all machine data from approximately 100,000 remote systems in the central service and information platform Provided the option to register errors online and follow the call status in real-time on the portal Made  available at the push of a button all information on the medical technology devices used in hospitals or clinics—from security checks and maintenance activities to current device statuses Provided PDF format Service Performance Reports that summarize information from periods of time ranging from previous weeks up to one year, meeting medical product law requirements  Why Oracle – Siemens AG favored Oracle for many reasons, however, the company ultimately decided to go with Oracle due to the enormous range of functionality the solutions offered for the healthcare sector.“We are not programmers; we are service providers in the medical technology segment and focus on the contents of the portal. All the functionality necessary for internet-based customer interaction is already standard in Oracle WebCenter Portal, which is a huge plus for us. Having Oracle as our technology partner ensures that the product will continually evolve, providing a strong technology platform for our customer service portal well into the future,” said Joerg Modlmayr project manager, Healthcare Customer Service Portal, Siemens AG. Partner Involvement – Siemens AG selected Oracle Partner Sapient because the company offered a service portfolio that perfectly met Siemens’ requirements and had a wealth of experience implementing Oracle WebCenter Portal. Additionally, Sapient had designers with a very high level of expertise in usability—an aspect that Siemens considered to be of vast importance for the project.  “The Sapient team completely met all our expectations. Our tightly timed project was completed on schedule, and the positive feedback from our users proves that we set the right measures in terms of usability—all thanks to the folks at Sapient,” Modlmayr said.  Partner Name – Sapient GmbH Deutschland Partner URL – www.sapient.com

  Read the article

• MVVM - how to make creating viewmodels at runtime less painfull

  - by Mr Happy

  I apologize for the long question, it reads a bit as a rant, but I promise it's not! I've summarized my question(s) below In the MVC world, things are straightforward. The Model has state, the View shows the Model, and the Controller does stuff to/with the Model (basically), a controller has no state. To do stuff the Controller has some dependencies on web services, repository, the lot. When you instantiate a controller you care about supplying those dependencies, nothing else. When you execute an action (method on Controller), you use those dependencies to retrieve or update the Model or calling some other domain service. If there's any context, say like some user wants to see the details of a particular item, you pass the Id of that item as parameter to the Action. Nowhere in the Controller is there any reference to any state. So far so good. Enter MVVM. I love WPF, I love data binding. I love frameworks that make data binding to ViewModels even easier (using Caliburn Micro a.t.m.). I feel things are less straightforward in this world though. Let's do the exercise again: the Model has state, the View shows the ViewModel, and the ViewModel does stuff to/with the Model (basically), a ViewModel does have state! (to clarify; maybe it delegates all the properties to one or more Models, but that means it must have a reference to the model one way or another, which is state in itself) To do stuff the ViewModel has some dependencies on web services, repository, the lot. When you instantiate a ViewModel you care about supplying those dependencies, but also the state. And this, ladies and gentlemen, annoys me to no end. Whenever you need to instantiate a ProductDetailsViewModel from the ProductSearchViewModel (from which you called the ProductSearchWebService which in turn returned IEnumerable<ProductDTO>, everybody still with me?), you can do one of these things: call new ProductDetailsViewModel(productDTO, _shoppingCartWebService /* dependcy */);, this is bad, imagine 3 more dependencies, this means the ProductSearchViewModel needs to take on those dependencies as well. Also changing the constructor is painfull. call _myInjectedProductDetailsViewModelFactory.Create().Initialize(productDTO);, the factory is just a Func, they are easily generated by most IoC frameworks. I think this is bad because Init methods are a leaky abstraction. You also can't use the readonly keyword for fields that are set in the Init method. I'm sure there are a few more reasons. call _myInjectedProductDetailsViewModelAbstractFactory.Create(productDTO); So... this is the pattern (abstract factory) that is usually recommended for this type of problem. I though it was genious since it satisfies my craving for static typing, until I actually started using it. The amount of boilerplate code is I think too much (you know, apart from the ridiculous variable names I get use). For each ViewModel that needs runtime parameters you'll get two extra files (factory interface and implementation), and you need to type the non-runtime dependencies like 4 extra times. And each time the dependencies change, you get to change it in the factory as well. It feels like I don't even use an DI container anymore. (I think Castle Windsor has some kind of solution for this [with it's own drawbacks, correct me if I'm wrong]). do something with anonymous types or dictionary. I like my static typing. So, yeah. Mixing state and behavior in this way creates a problem which don't exist at all in MVC. And I feel like there currently isn't a really adequate solution for this problem. Now I'd like to observe some things: People actually use MVVM. So they either don't care about all of the above, or they have some brilliant other solution. I haven't found an indepth example of MVVM with WPF. For example, the NDDD-sample project immensely helped me understand some DDD concepts. I'd really like it if someone could point me in the direction of something similar for MVVM/WPF. Maybe I'm doing MVVM all wrong and I should turn my design upside down. Maybe I shouldn't have this problem at all. Well I know other people have asked the same question so I think I'm not the only one. To summarize Am I correct to conclude that having the ViewModel being an integration point for both state and behavior is the reason for some difficulties with the MVVM pattern as a whole? Is using the abstract factory pattern the only/best way to instantiate a ViewModel in a statically typed way? Is there something like an in depth reference implementation available? Is having a lot of ViewModels with both state/behavior a design smell?

  Read the article

• Announcing Solaris Technical Track at NLUUG Spring Conference on Operating Systems

  - by user9135656

  The Netherlands Unix Users Group (NLUUG) is hosting a full-day technical Solaris track during its spring 2012 conference. The official announcement page, including registration information can be found at the conference page.This year, the NLUUG spring conference focuses on the base of every computing platform; the Operating System. Hot topics like Cloud Computing and Virtualization; the massive adoption of mobile devices that have their special needs in the OS they run but that at the same time put the challenge of massive scalability onto the internet; the upspring of multi-core and multi-threaded chips..., all these developments cause the Operating System to still be a very interesting area where all kinds of innovations have taken and are taking place.The conference will focus specifically on: Linux, BSD Unix, AIX, Windows and Solaris. The keynote speech will be delivered by John 'maddog' Hall, infamous promotor and supporter of UNIX-based Operating Systems. He will talk the audience through several decades of Operating Systems developments, and share many stories untold so far. To make the conference even more interesting, a variety of talks is offered in 5 parallel tracks, covering new developments in and  also collaboration  between Linux, the BSD's, AIX, Solaris and Windows. The full-day Solaris technical track covers all innovations that have been delivered in Oracle Solaris 11. Deeply technically-skilled presenters will talk on a variety of topics. Each topic will first be introduced at a basic level, enabling visitors to attend to the presentations individually. Attending to the full day will give the audience a comprehensive overview as well as more in-depth understanding of the most important new features in Solaris 11.NLUUG Spring Conference details:* Date and time:        When : April 11 2012        Start: 09:15 (doors open: 8:30)        End  : 17:00, (drinks and snacks served afterwards)* Venue:        Nieuwegein Business Center        Blokhoeve 1             3438 LC Nieuwegein              The Nederlands          Tel     : +31 (0)30 - 602 69 00        Fax     : +31 (0)30 - 602 69 01        Email   : [email protected]        Route   : description - (PDF, Dutch only)* Conference abstracts and speaker info can be found here.* Agenda for the Solaris track: Note: talks will be in English unless marked with 'NL'.1.      Insights to Solaris 11         Joerg Moellenkamp - Solaris Technical Specialist         Oracle Germany2.      Lifecycle management with Oracle Solaris 11         Detlef Drewanz - Solaris Technical Specialist         Oracle Germany3.      Solaris 11 Networking - Crossbow Project        Andrew Gabriel - Solaris Technical Specialist        Oracle UK4.      ZFS: Data Integrity and Security         Darren Moffat - Senior Principal Engineer, Solaris Engineering         Oracle UK5.      Solaris 11 Zones and Immutable Zones (NL)         Casper Dik - Senior Staff Engineer, Software Platforms         Oracle NL6.      Experiencing Solaris 11 (NL)         Patrick Ale - UNIX Technical Specialist         UPC Broadband, NLTalks are 45 minutes each.There will be a "Solaris Meeting point" during the conference where people can meet-up, chat with the speakers and with fellow Solaris enthousiasts, and where live demos or other hands-on experiences can be shared.The official announcement page, including registration information can be found at the conference page on the NLUUG website. This site also has a complete list of all abstracts for all talks.Please register on the NLUUG website.

  Read the article

• Application Composer: Exposing Your Customizations in BI Analytics and Reporting

  - by Richard Bingham

  Introduction This article explains in simple terms how to ensure the customizations and extensions you have made to your Fusion Applications are available for use in reporting and analytics. It also includes four embedded demo videos from our YouTube channel (if they don't appear check the browser address bar for a blocking shield icon). If you are new to Business Intelligence consider first reviewing our getting started article, and you can read more about the topic of custom subject areas in the documentation book Extending Sales. There are essentially four sections to this post. First we look at how custom fields added to standard objects are made available for reporting. Secondly we look at creating custom subject areas on the standard objects. Next we consider reporting on custom objects, starting with simple standalone objects, then child custom objects, and finally custom objects with relationships. Finally this article reviews how flexfields are exposed for reporting. Whilst this article applies to both Cloud/SaaS and on-premises deployments, if you are an on-premises developer then you can also use the BI Administration Tool to customize your BI metadata repository (the RPD) and create new subject areas. Whilst this is not covered here you can read more in Chapter 8 of the Extensibility Guide for Developers. Custom Fields on Standard Objects If you add a custom field to your standard object then it's likely you'll want to include it in your reports. This is very simple, since all new fields are instantly available in the "[objectName] Extension" folder in existing subject areas. The following two minute video demonstrates this. Custom Subject Areas for Standard Objects You can create your own subject areas for use in analytics and reporting via Application Composer. An example use-case could be to simplify the seeded subject areas, since they sometimes contain complex data fields and internal values that could confuse business users. One thing to note is that you cannot create subject areas in a sandbox, as it is not supported by BI, so once your custom object is tested and complete you'll need to publish the sandbox before moving forwards. The subject area creation processes is essentially two-fold. Once the request is submitted the ADF artifacts are generated, then secondly the related metadata is sent to the BI presentation server API's to make the updates there. One thing to note is that this second step may take up to ten minutes to complete. Once finished the status of the custom subject area request should show as 'OK' and it is then ready for use. Within the creation processes wizard-like steps there are three concepts worth highlighting: Date Flattening - this feature permits the roll up of reports at various date levels, such as data by week, month, quarter, or year. You simply check the box to enable it for that date field. Measures - these are your own functions that you can build into the custom subject area. They are related to the field data type and include min-max for dates, and sum(), avg(), and count() for  numeric fields. Implicit Facts - used to make the BI metadata join between your object fields and the calculated measure fields. The advice is to choose the most frequently used measure to ensure consistency. This video shows a simple example, where a simplified subject area is created for the customer 'Contact' standard object, picking just a few fields upon which users can then create reports. Custom Objects Custom subject areas support three types of custom objects. First is a simple standalone custom object and for which the same process mentioned above applies. The next is a custom child object created on a standard object parent, and finally a custom object that is related to a parent object - usually through a dynamic choice list. Whilst the steps in each of these last two are mostly the same, there are differences in the way you choose the objects and their fields. This is illustrated in the videos below.The first video shows the process for creating a custom subject area for a simple standalone custom object. This second video demonstrates how to create custom subject areas for custom objects that are of parent:child type, as well as those those with dynamic-choice-list relationships. &lt;span id=&quot;XinhaEditingPostion&quot;&gt;&lt;/span&gt; Flexfields Dynamic and Extensible Flexfields satisfy a similar requirement as custom fields (for Application Composer), with flexfields common across the Fusion Financials, Supply Chain and Procurement, and HCM applications. The basic principle is when you enable and configure your flexfields, in the edit page under each segment region (for both global and context segments) there is a BI Enabled check box. Once this is checked and you've completed your configuration, you run the Scheduled Process job named 'Import Oracle Fusion Data Extensions for Transactional Business Intelligence' to generate and migrate the related BI artifacts and data. This applies for dynamic, key, and extensible flexfields. Of course there is more to consider in terms of how you wish your flexfields to be implemented and exposed in your reports, and details are given in Chapter 4 of the Extending Applications guide.

  Read the article

• Best Practices Generating WebService Proxies for Oracle Sales Cloud (Fusion CRM)

  - by asantaga

  I've recently been building a REST Service wrapper for Oracle Sales Cloud and initially all was going well, however as soon as I added all of my Web Service proxies I started to get weird errors..  My project structure looks like this What I found out was if I only had the InteractionsService & OpportunityService WebService Proxies then all worked ok, but as soon as I added the LocationsService Proxy, I would start to see strange JAXB errors. Example of the error message Exception in thread "main" javax.xml.ws.WebServiceException: Unable to create JAXBContextat com.sun.xml.ws.model.AbstractSEIModelImpl.createJAXBContext(AbstractSEIModelImpl.java:164)at com.sun.xml.ws.model.AbstractSEIModelImpl.postProcess(AbstractSEIModelImpl.java:94)at com.sun.xml.ws.model.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:281)at com.sun.xml.ws.client.WSServiceDelegate.buildRuntimeModel(WSServiceDelegate.java:762)at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.buildRuntimeModel(WLSProvider.java:982)at com.sun.xml.ws.client.WSServiceDelegate.createSEIPortInfo(WSServiceDelegate.java:746)at com.sun.xml.ws.client.WSServiceDelegate.addSEI(WSServiceDelegate.java:737)at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:361)at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.internalGetPort(WLSProvider.java:934)at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate$PortClientInstanceFactory.createClientInstance(WLSProvider.java:1039)...... Looking further down I see the error message is related to JAXB not being able to find an objectFactory for one of its types Caused by: java.security.PrivilegedActionException: com.sun.xml.bind.v2.runtime.IllegalAnnotationsException: 6 counts of IllegalAnnotationExceptionsThere's no ObjectFactory with an @XmlElementDecl for the element {http://xmlns.oracle.com/apps/crmCommon/activities/activitiesService/}AssigneeRsrcOrgIdthis problem is related to the following location:at protected javax.xml.bind.JAXBElement com.oracle.xmlns.apps.crmcommon.activities.activitiesservice.ActivityAssignee.assigneeRsrcOrgId at com.oracle.xmlns.apps.crmcommon.activities.activitiesservice.ActivityAssignee This is very strange... My first thoughts are that when I generated the WebService Proxy I entered the package name as "oracle.demo.pts.fusionproxy.servicename" and left the generated types as blank. This way all the generated types get put into the same package hierarchy and when deployed they get merged... Sounds resaonable and appears to work but not in this case..  To resolve this I regenerate the proxy but this time setting : Package name : To the name of my package eg. oracle.demo.pts.fusionproxy.interactionsRoot Package for Generated Types :  Package where the types will be generated to, e.g. oracle.demo.pts.fusionproxy.SalesParty.types When I ran the application now, it all works , awesome eh???? Alas no, there is a serious side effect. The problem now is that to help coding I've created a collection of helper classes , these helper classes take parameters which use some of the "generic" datatypes, like FindCriteria. e.g. This wont work any more public static FindCriteria createCustomFindCriteria(FindCriteria pFc,String pAttributes) Here lies a gremlin of a problem.. I cant use this method anymore, this is because the FindCriteria datatype is now being defined two, or more times, in the generated code for my project. If you leave the Root Package for types blank it will get generated to com.oracle.xmlns, and if you populate it then it gets generated to your custom package.. The two datatypes look the same, sound the same (and if this were a duck would sound the same), but THEY ARE NOT THE SAME... Speaking to development, they recommend you should not be entering anything in the Root Packages section, so the mystery thickens why does it work.. Well after spending sometime with some colleagues of mine in development we've identified the issue.. Alas different parts of Oracle Fusion Development have multiple schemas with the same namespace, when the WebService generator generates its classes its not seeing the other schemas properly and not generating the Object Factories correctly...  Thankfully I've found a workaround Solution Overview When generating the proxies leave the Root Package for Generated Types BLANK When you have finished generating your proxies, use the JAXB tool XJC and generate Java classes for all datatypes  Create a project within your JDeveloper11g workspace and import the java classes into this project Final bit.. within the project dependencies ensure that the JAXB/XJC generated classes are "FIRST" in the classpath Solution Details Generate the WebServices SOAP proxies When generating the proxies your generation dialog should look like this Ensure the "unwrap" parameters is selected, if it isn't then that's ok, it simply means when issuing a "get" you need to extract out the Element Generate the JAXB Classes using XJC XJC provides a command line switch called -wsdl, this (although is experimental/beta) , accepts a HTTP WSDL and will generate the relevant classes. You can put these into a single batch/shell script xjc -wsdl https://fusionservername:443/appCmmnCompInteractions/InteractionService?wsdlxjc -wsdl https://fusionservername443/opptyMgmtOpportunities/OpportunityService?wsdl Create Project in JDeveloper to store the XJC "generated" JAXB classes Within the project folder create a filesystem folder called "src" and copy the generated files into this folder. JDeveloper11g should then see the classes and display them, if it doesnt try clicking the "refresh" button In your main project ensure that the JDeveloper XJC project is selected as a dependancy and IMPORTANT make sure it is at the top of the list. This ensures that the classes are at the front of the classpath And voilà.. Hopefully you wont see any JAXB generation errors and you can use common datatypes interchangeably in your project, (e.g. FindCriteria etc)

  Read the article

• XBRL - Moving from Production to Consumption

  - by jmorourke

  Here's an update on what’s new with XBRL and how it can actually benefit your organization versus adding extra time and costs to financial reporting.  On February 29th (leap day) of 2012 I attended the XBRL and Financial Analysis Technology Conference at Baruch College in NYC.  The event, which attracted over 300 XBRL gurus and fans was presented by XBRL US, The New York Society of Security Analysts’ Improved Corporate Reporting Committee, and Baruch College’s Robert Zicklin Center for Corporate Integrity.  The event featured keynotes from the U.S. Securities and Exchange Commission (SEC), and the CFA Institute as well as panels covering alternative research tools and data, corporate reporting to stakeholders and a demonstration of XBRL analysis tools.  The program culminated in a presentation of the finalists and the winner of the $20,000 XBRL Challenge.    Some of the key points made in the sessions included: The focus of XBRL tools is moving from production to consumption. As of February 2012, over 9000 companies are reporting in XBRL, with over 10 million facts filed to date XBRL taxonomy extensions have dropped from 27% to 11% making comparisons easier The SEC reports that XBRL makes it easier to analyze disclosures, focus on accounting issues XBRL is helping standards-setters like the FASB speed their analysis of impacts of proposed accounting rule changes Companies like Thomson Reuters report that XBRL is helping speed the delivery of data to clients The most interesting part of the program though, was the session highlighting the 5 finalists in the XBRL Challenge competition and the winning solution.  The XBRL Challenge was launched in 2011 as a means of spurring the development of more end-user tools to help with the consumption of XBRL-based financial information.       Over an 8-month process handled by 5 judges, there were 84 registrants, 15 completed submissions, 5 finalists and one winner of the challenge.  All of the solutions are open-sourced tools and most of them focus on consuming XBRL-based data.  The 5 finalists included: Advanced XBRL Processing from Oxide solutions – XBRL viewer for taxonomies, filings and company data with peer comparison capabilities. Arrelle – API for XBRL processes, supports SEC Validations, RSS Feeds to access filings etc. Calcbench – XBRL data analysis tool that can be embedded in other web applications.  This tool can combine XBRL filings with real-time market data. XBRL to XL – allows the importing of XBRL data into Microsoft Excel for analysis, comparisons.  Users start on the web and populate Excel with XBRL data. XBurble – allows users to search and view XBRL filings, export to Excel, merge for comparison, and includes a workflow interface. The winner of the $20,000 XBRL Challenge prize was CalcBench.  More information about the XBRL Challenge and the finalists can be found at www.XBRLUS.org/challenge XBRL for Sustainability Reporting – other recent news on the XBRL front was the announcement by the Global Reporting Initiative (GRI) of an XBRL taxonomy for Sustainability Reporting.  This taxonomy was co-developed by the GRI and Deloitte and is designed to make the consumption of data found in Sustainability Reports much easier.  Although there is no government mandate to file Sustainability Reports in XBRL format, organizations that do use the GRI guidelines for Sustainability Reporting are encouraged to tag and submit their data voluntarily to the GRI – who will populate a database with Sustainability Reporting data and make this available to the public.  For more information about this initiative, you can go to the GRI web site:  www.globalreporting.org. So how does all of this benefit corporate filers and investors?  Since its introduction, the consensus in the market is that XBRL has mainly benefited the regulators and investment analysts who need to consume and analyze large volumes of financial data.  But with the emergence of more end-user tools for consuming and analyzing XBRL-based data, and the ability to perform quick comparisons of one company versus its peers and competitors in an industry group, will soon accelerate the benefits to corporate finance staff, as well as individual investors.  This could apply to financial results tagged in XBRL, as well as non-financial information such as Sustainability Reporting – which over the long-term will likely be integrated with financial reporting.   And as multiple regulators and agencies in a country adopt the XBRL standard for corporate filings, more benefits will accrue as companies will be able to leverage one set of XBRL-based financial data for multiple regulatory filings.     For more information about the latest developments in XBRL, check out the XBRL US or XBRL International web sites:  www.xbrl.org, www.xbrlus.org. For more information about what Oracle is doing to support XBRL, here are some links: http://www.oracle.com/us/solutions/ent-performance-bi/disclosure-management-065892.html http://www.oracle.com/technetwork/database/features/xmldb/index-087631.html Feel free to contact me if you have any questions or need more information:  [email protected]

  Read the article

• Educause Top-Ten IT Issues - the most change in a decade or more

  - by user739873

  The Education IT Issue Panel has released the 2012 top-ten issues facing higher education IT leadership, and instead of the customary reshuffling of the same deck, the issues reflect much of the tumult and dynamism facing higher education generally.  I find it interesting (and encouraging) that at the top of this year's list is "Updating IT Professionals' Skills and Roles to Accommodate Emerging Technologies and Changing IT Management and Service Delivery Models."  This reflects, in my view, the realization that higher education IT must change in order to fully realize the potential for transforming the institution, and therefore it's people must learn new skills, understand and accept new ways of solving problems, and not be tied down by past practices or institutional inertia. What follows in the remaining 9 top issues all speak, in some form or fashion, to the need for dramatic change, but not just in the areas of "funding IT" (code for cost containment or reduction), but rather the need to increase effectiveness and efficiency of the institution through the use of technology—leveraging the wave of BYOD (Bring Your Own Device) to the institution's advantage, rather than viewing it as a threat and a problem to be contained. Although it's #10 of 10, IT Governance (and establishment and implementation of the governance model throughout the institution) is key to effectively acting upon many of the preceding issues in this year's list.  In the majority of cases, technology exists to meet the needs and requirements to effectively address many of the challenges outlined in top-ten issues list. Which brings me to my next point. Although I try not to sound too much like an Oracle commercial in these (all too infrequent) blog posts, I can't help but point out how much confluence there is between several of the top issues this year and what my colleagues and I have been evangelizing for some time. Starting from the bottom of the list up: 1) I'm gratified that research and the IT challenges it presents has made the cut.  Big Data (or Large Data as it's phased in the report) is rapidly going to overwhelm much of what exists today even at our most prepared and well-equipped research universities.  Combine large data with the significantly more stringent requirements around data preservation, archiving, sharing, curation, etc. coming from granting agencies like NSF, and you have the brewing storm that could result in a lot of "one-off" solutions to a problem that could very well be addressed collectively and "at scale."   2) Transformative effects of IT – while I see more and more examples of this, there is still much more that can be achieved. My experience tells me that culture (as the report indicates or at least poses the question) gets in the way more than technology not being up to task.  We spend too much time on "context" and not "core," and get lost in the weeds on the journey to truly transforming the institution with technology. 3) Analytics as a key element in improving various institutional outcomes.  In our work around Student Success, we see predictive "academic" analytics as essential to getting in front of the Student Success issue, regardless of how an institution or collections of institutions defines success.  Analytics must be part of the fabric of the key academic enterprise applications, not a bolt-on.  We will spend a significant amount of time on this topic during our semi-annual Education Industry Strategy Council meeting in Washington, D.C. later this month. 4) Cloud strategy for the broad range of applications in the academic enterprise.  Some of the recent work by Casey Green at the Campus Computing Survey would seem to indicate that there is movement in this area but mostly in what has been termed "below the campus" application areas such as collaboration tools, recruiting, and alumni relations.  It's time to get serious about sourcing elements of mature applications like student information systems, HR, Finance, etc. leveraging a model other than traditional on-campus custom. I've only selected a few areas of the list to highlight, but the unifying theme here (and this is where I run the risk of sounding like an Oracle commercial) is that these lofty goals cry out for partners that can bring economies of scale to bear on the problems married with a deep understanding of the nuances unique to higher education.  In a recent piece in Educause Review on Student Information Systems, the author points out that "best of breed is back". Unfortunately I am compelled to point out that best of breed is a large part of the reason we have made as little progress as we have as an industry in advancing some of the causes outlined above.  Don't confuse "integrated" and "full stack" for vendor lock-in.  The best-of-breed market forces that Ron points to ensure that solutions have to be "integratable" or they don't survive in the marketplace. However, by leveraging the efficiencies afforded by adopting solutions that are pre-integrated (and possibly metered out as a service) allows us to shed unnecessary costs – as difficult as these decisions are to make and to drive throughout the organization. Cole

  Read the article

• jQuery with SharePoint solutions

  - by KunaalKapoor

  For me jQuery is the 'Plan-B' for everything.And most of my projects include the use of jQuery for something or the other, so I decided to write a small note on what works best while using jQuery along with SharePoint.I prefer to use the jQuery JavaScript library, which is far more robust, easier to use, and allows for plugins. Follow the steps below to add jQuery to your master page. For office 365, the prefered location to add jQuery files is the "Site Asserts" library.Deployment Best PracticesThey are only as good as the context it’s being referenced.  In other words, take into account your world before applying it.Script your deployment options.  Folder in SPD. Use the file system.  Make external references.  The JQuery library is on the Microsoft Ajax Content Delivery Network. You may even choose to publish to and from the document library. (pros and cons to this approach)Reference options when referencing the script.ScriptLink will make sure it’s loaded at the top of the page and only loaded once. You need Visual Studio or SPDContent Editor Web Part (CEWP).  Drop it on the page and it’s there.  Easy but dangerousCustom Actions. Great for global deployments of JQuery.  Loads it on every page. It also works in Sandbox installations.Deployment Maintenance Dont’sDon’t add scripts directly to your Master Page. That’s way too much effort because the pages are hard to maintain.Don’t add scripts directly to the CEWP.  Use a content link instead. That will allow for reuse. If you or someone deletes the CEWP you won’t lose code in the web partSecurity.  Any scripts run with the same privileges of the current user.  In other words, you can’t get in trouble.Development Best PracticesDon’t abuse the DOM.  There are better options to load the DOM without hitting it 1,000 times.User other performance boosters.Try other libraries.  Try some custom codeAvoid String conversionMinify your filesUse CAML to reduce number of returns rowsOnly update your JQuery library AFTER RIGOROUS REGRESSION TESTINGCRUD operations can come with some funSP Services wraps SharePoint’s web services for executionThe Bing SDK is pretty easy to use.  You can add it to your page with a script,  put it into a content editor web part and connect it from the address parameters in a list.Steps:1. Go to jquery.com and download the latest jQuery library to your desktop. You want to get the compressed production version, not the development version.2. Open SharePoint Designer (SPD) and connect to the root level of your site's site collection.In SPD, open the "Style Library" folder. Create a folder named "Scripts" inside of the Style Library. Drag the jQuery library JavaScript file from your desktop into the Scripts folder.In the Scripts folder, create a new JavaScript file and name it (e.g. "actions.js").3. If you are using visual studio add a folder for js, you can create a new folder at the root level or if you prefer more cleaner solutions like me, you can use the layouts folder which cleans out on deactivation/uninstall.4. Within the <head> tag of the master page, add a script reference to the jQuery library just above the content place holder named "PlaceHolderAdditonalPageHead" (and above your custom CSS references, if applicable) as follows:<script src="/Style%20Library/Scripts/{jquery library file}.js" type="text/javascript"></script>Immediately after the jQuery library reference add a script reference to your custom scripts file as follows:<script src="/Style%20Library/Scripts/actions.js" type="text/javascript"></script>Inside your script tag, you can test if jQuery is already defined and if not, then add it to the page.<script type='text/javascript'>  if (typeof jQuery == 'undefined')    document.write('<scr'+'ipt type="text/javascript" src="http://code.jquery.com/jquery-1.6.1.min.js"></sc'+'ript>');</script>For the inquisitive few... Read on if you'd like :)Why jQuery on SharePoiny is AwesomeIt’s all about that visual wow factor.  You can get past that, “But it looks like SharePoint”  Take a long list view and put it into JQuery with pagination, etc and you are the hero.  It’s also about new controls you get with JQuery that you couldn’t do before.Why jQuery with SharePoint should be AwfulAlthough it’s fairly easy to get jQuery up and running. Copy/Paste can cause a problem.  If you don’t understand what it’s doing in the Client Object Model and the Document Object Model then it will do things on your site that were completely unexpected. Many blogs will note workarounds they employed on their sites. Why it’s not working: Debugging “sucks”.You need to develop small blocks of functionality, Test it by putting in some alerts  and console.log. Set breakpoints and monitor the DOM via Firebug and some IE development toolsPerformance - It happens all the time. But you should look at the tradeoffs. More time may give you more functionality.Consistency - ”But it works fine on my computer. So test on many browsers.  Take into account client resourcesHarm the Farm -  You need to code wisely and negatively test.  Don’t be the cause of a DoS attack that’s really JQuery asking for a resource over and over and over again.  So code wisely. Do negative testing. Monitor Server Resources.They also did a demo where JQuery did an endless loop to pull data from a list. It’s a poor decision but also an easy mistake.  They spiked their server resources within a couple seconds and had to shut down the call before it brought it down.ConclusionJQuery is now another tool in your tool kit. You don’t have to use it. Use it where it makes sense and where it helps you get your job done.Don’t abuse it, you will pay for it laterIt will add to page bloat so take that into accountIt can slow your performance

  Read the article

• Why everybody should do Sales!

  - by FelixWehmeyer

  I speak with many business students and ask them what job they want to get into. Most of them tell me they want a job in Marketing, Management Consulting or Finance. I hardly ever hear “Sales, that is what I want to do”, and I often wonder why. I would like to start with a quote from Zig Ziglar, a successful salesman: "Nothing happens until someone sells something." But to get back to the main point, why wouldn’t you want to get in sales? When people think of sales, they picture a typical salesman in their head and think that selling is scary and all about manipulating, pressuring and pushing someone into buying something they don’t need. Are these stereotypes accurate? I don’t believe so: So why should you want to be in sales? If you think about selling as providing the solution for the problem and talking about the benefits of making a decision, then every job in this world comes out of selling. In every job you deal with coworkers that you want to convince of your ideas or convincing your boss that the project you want to work on is good for the company.  These days, consumers and businesses are very well informed about services and products. When we are talking about highly complex products, such as IT solutions, businesses don’t accept your run-of-the-mill salesman who is pushing a sale. These are often long projects where salespeople have a consulting and leading role. Salespeople need to be able to consult companies and customers with their problem and convince a client that their solution is the best fit. Next to the fact that sales, is by far, not as scary and shady as you thought, there are a few points that will make you want to consider a sales career: Negotiating skills – When you are in sales you will learn how to negotiate. Salespeople learn to listen to their customers and try to make them happy, overcoming objections and come to a final agreement that both parties are happy with. Persistence/Challenge – As a salesperson you will often hear a negative answer, in a sales role you will start to embrace this and see a ‘no’ as a challenge not as a rejection. This attitude change can help you a lot in your career, but also in your personal life. You will become more optimistic and gain a go-getter attitude. Salary – As salespeople are seen as the moneymakers for the company, companies often reward their sales teams generously. Most likely in a sales role, you will receive a good basic salary and often you get nice bonuses on top of that based on your performance. Oracle is, for instance, the company that offers the highest average commission in the world. Further you can expect many other benefits as companies know that there is a high demand for good salespeople. Teamwork – Sales is a lot like having your own business, you are responsible for your own territory or set of clients. You are the one who is responsible for the revenue coming from that territory. So in order to gain revenue you will have to work together with many departments and people to make that happen. Every (potential) client could be seen as a different project, and you are the project leader. Understanding customers and the business – From any job that you choose sales will get you the most insight in the market. Salespeople are usually well-connected, talk with different customers and learn about the market and are up-to-date about all latest changes. Even if you want to change to a different role in the long run, you have a great head start as you understand the market and customers like no one else. Job security – Look at all the job postings out there. Many of them are sales-related. So if you want to have a steady job, plenty of choice and companies willing to invest in you, sales could be something for you.  Are you interested in exploring a sales career? At Oracle we are always looking for good sales professionals and fresh graduates who want to get into sales! For many languages such as Flemish, Dutch, German, French, Swedish and Norwegian (and more) we are currently looking for graduates who want to develop their career in Oracle. Please have a look at this article for the experience of a Business Development Consultant at Oracle in Dublin. Want to learn more about this job check out this link or send an email to jessica.ebbelaar-at-oracle.com! Have a look at our website http://campus.oracle.com for all of our other latest sales and non-sales vacancies!

  Read the article

• Cannot connect to Open WiFi hotspot created by Android

  - by Bibhas

  I'm trying to share my 3G data connection via WiFi hotspot. I have an open Hotspot running on my phone(Xperia Neo V - MT11i - Android 2.3.4). But I cannot connect to it from my Ubuntu system. Here is the syslog while I try to connect to it - NetworkManager[1077]: <info> Activation (wlan0) starting connection 'TheNeo' NetworkManager[1077]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0] NetworkManager[1077]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[1077]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... NetworkManager[1077]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager[1077]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. NetworkManager[1077]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... NetworkManager[1077]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0] NetworkManager[1077]: <info> Activation (wlan0/wireless): connection 'TheNeo' requires no security. No secrets needed. NetworkManager[1077]: <info> Config: added 'ssid' value 'TheNeo' NetworkManager[1077]: <info> Config: added 'scan_ssid' value '1' NetworkManager[1077]: <info> Config: added 'key_mgmt' value 'NONE' NetworkManager[1077]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. NetworkManager[1077]: <info> Config: set interface ap_scan to 1 NetworkManager[1077]: <info> (wlan0): supplicant interface state: inactive -> scanning wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) NetworkManager[1077]: <info> (wlan0): supplicant interface state: scanning -> authenticating kernel: [17498.113553] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17498.310138] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17498.510069] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17498.710083] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17504.779927] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17504.976420] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17505.176379] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17505.376314] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17511.478385] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17511.674738] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17511.874655] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17512.074659] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17518.152643] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17518.349064] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17518.549051] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17518.748999] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17524.858896] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17525.055404] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17525.255387] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17525.455254] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17531.589176] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17531.785747] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17531.985724] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17532.185610] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17538.329257] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17538.528003] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17538.728024] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17538.927922] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17545.022036] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17545.218339] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17545.418319] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17545.618206] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17551.724177] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17551.920685] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17552.120597] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17552.320526] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out NetworkManager[1077]: <warn> Activation (wlan0/wireless): association took too long, failing activation. NetworkManager[1077]: <info> (wlan0): device state change: config -> failed (reason 'supplicant-timeout') [50 120 11] NetworkManager[1077]: <warn> Activation (wlan0) failed for access point (TheNeo) NetworkManager[1077]: <warn> Activation (wlan0) failed. NetworkManager[1077]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0] NetworkManager[1077]: <info> (wlan0): deactivating device (reason 'none') [0] NetworkManager[1077]: <info> (wlan0): supplicant interface state: authenticating -> disconnected NetworkManager[1077]: <warn> Couldn't disconnect supplicant interface: This interface is not connected. Why is direct probe to 5c:b5:24:2f:d1:2f timed out? Any idea?

  Read the article

• Cookbook: SES and UCM setup

  - by George Maggessy

  The purpose of this post is to guide you setting up the integration between UCM and SES. On my next post I’ll show different approaches to integrate WebCenter Portal, UCM and SES based on some common scenarios. Let’s get started. WebCenter Content Configuration WebCenter Content has a component that adds functionality to the content server to allow it to be searched via the Oracle SES. To enable the component installation, go to Administration -&gt; Admin Server and select SESCrawlerExport. Click the update button and restart UCM_server1 managed server. Once the managed server is back, we’ll configure the component. In the menu, under Administration you should see SESCrawlerExport. Click on the link. You’ll see the window below. Click on Configure SESCrawlerExport. Configure the values below: Hostname: SES hostname. Feed Location: Directory where data feeds will be saved. Metadata List: List of metadata that will be searchable by SES. After updating the values click on the Update button. Come back to the SESCrawlerExport Administration UI and click on Take Snapshot button. It will create the data feeds in the specified Feed Location. To check if the correct configuration was done, please access the following URL http://&lt;ucm_server&gt;:&lt;port&gt;/cs/idcplg?IdcService=SES_CRAWLER_DOWLOAD_CONFIG&amp;source=default. It should download config file in the format below: &lt;?xml version="1.0" encoding="UTF-8"?&gt; &lt;rsscrawler xmlns="http://xmlns.oracle.com/search/rsscrawlerconfig"&gt; &lt;feedLocation&gt;&lt;![CDATA[http://adc6160699.us.oracle.com:16200/cs/idcplg?IdcService=SES_CRAWLER_DOWNLOAD_CONTROL&amp;source=default]]&gt;&lt;/feedLocation&gt; &lt;errorFileLocation&gt;&lt;![CDATA[http://adc6160699.us.oracle.com:16200/cs/idcplg?IdcService=SES_CRAWLER_STATUS&amp;IsJava=1&amp;source=default&amp;StatusFeed=]]&gt;&lt;/errorFileLocation&gt; &lt;feedType&gt;controlFeed&lt;/feedType&gt; &lt;sourceName&gt;default&lt;/sourceName&gt; &lt;securityType&gt;attributeBased&lt;/securityType&gt; &lt;securityAttribute name="Account" grant="true"/&gt; &lt;securityAttribute name="DocSecurityGroup" grant="true"/&gt; &lt;securityAttribute name="Collab" grant="true"/&gt; &lt;/rsscrawler&gt; Make sure Account and DocSecurityGroup values are true. SES Configuration Let’s start by configuring the Identity Plug-ins in SES. Go to Global Settings -&gt; System -&gt; Identity Management Setup. Select Oracle Content Server and click the Activate button. We’ll populate the following values: HTTP endpoint for authentication: URL to WebCenter Content. Notice that /cs/idcplg was added at the end of the URL. Admin User: UCM Admin user. This user must have access to all CPOE content. Password: Password to Admin user. Authentication Type: NATIVE. Go back to the Home tab and click on Sources on the top left. Select Oracle Content Server on the right and click the Create button. Configuration URL: URL that point to the configuration file. Example: http://&lt;ucm_hostname&gt;:&lt;port&gt;/cs/idcplg?IdcService=SES_CRAWLER_DOWNLOAD_CONFIG&amp;source=default. User ID: UCM Admin user. Password: Password to Admin user. Click on the Authorization tab and add the appropriate values to the fields below. Make sure you see the ACCOUNT and DOCSECURITYGROUP security attributes at the end of the page. HTTP endpoint for authorization: http://&lt;ucm_hostname&gt;:&lt;port&gt;/cs/idcplg. Display URL prefix: http://&lt;ucm_hostname&gt;:&lt;port&gt;/cs. Administrator user: UCM Admin user. Administrator password. On the Document Types tab, add the documents that should be indexed by SES. As our last step, we’ll configure the Federation Trusted Entities under Global Settings. Entity Name: The user must be present in both the identity management server configured for your WebCenter application and the identity management server configured for Oracle SES. For instance, I used weblogic in my sample. Password: Entity user password.\ Now you are ready to test the integration on the SES UI: http://&lt;ses hostname&gt;:&lt;port&gt;/search/query/.

  Read the article

• Add SQL Azure database to Azure Web Role and persist data with entity framework code first.

  - by MagnusKarlsson

  In my last post I went for a warts n all approach to set up a web role on Azure. In this post I’ll describe how to add an SQL Azure database to the project. This will be described with an as minimal as possible amount of code and screen dumps. All questions are welcome in the comments area. Please don’t email since questions answered in the comments field is made available to other visitors. As an example we will add a comments section to the site we used in the previous post (Länk här). Steps: 1. Create a Comments entity and then use Scaffolding to set up controller and view, and add ConnectionString to web.config. 2. Create SQL Azure database in Management Portal and link the new database 3. Test it online!   1. Right click Models folder, choose add, choose “class…” . Name the Class Comment. 1.1 Replace the Code in the class with the following: using System.Data.Entity; namespace MvcWebRole1.Models { public class Comment {    public int CommentId { get; set; }    public string Name { get; set; }      public string Content { get; set; } } public class CommentsDb : DbContext { public DbSet<Comment> CommentEntries { get; set; } } } Now Entity Framework can create a database and a table named Comment. Build your project to assert there are no build errors.   1.2 Right click Controllers folder, choose add, choose “class…” . Name the Class CommentController and fill out the values as in the example below.     1.3 Click Add. Visual Studio now creates default View for CRUD operations and a Controller adhering to these and opens them. 1.3 Open Web.config and add the following connectionstring in <connectionStrings> node. <add name="CommentsDb” connectionString="data source=(LocalDB)\v11.0;Integrated Security=SSPI;AttachDbFileName=|DataDirectory|\CommentsDb.mdf;Initial Catalog=CommentsDb;MultipleActiveResultSets=True" providerName="System.Data.SqlClient" />   1.4 Save All and press F5 to start the application. 1.5 Go to http://127.0.0.1:81/Comments which will redirect you through CommentsController to the Index View which looks like this:     Click Create new. In the Create-view, add name and content and press Create.   1: // 2: // POST: /Comments/Create 3:  4: [HttpPost] 5: public ActionResult Create(Comment comment) 6: { 7: if (ModelState.IsValid) 8: { 9: db.CommentEntries.Add(comment); 10: db.SaveChanges(); 11: return RedirectToAction("Index"); 12: } 13:  14: return View(comment); 15: } 16:    The default View() is Index so that is the View you will come to. Looking like this: 1: // 2: // GET: /Comments/ 3: 4: public ActionResult Index() 5: { 6: return View(db.CommentEntries.ToList()); 7: } Resulting in the following screen dump(success!):   2. Now, go to the Management portal and Create a new db.   2.1 With the new database created. Click the DB icon in the left most menu. Then click the newly created database. Click DASHBOARD in the top menu. Finally click Connections strings in the right menu to get the connection string we need to add in our web.debug.config file.   2.2 Now, take a copy of the connection String earlier added to the web.config and paste in web.debug.conifg in the connectionstrings node. Replace everything within “ “ in the copied connectionstring with that you got from SQL Azure. You will have something like this:   2.3 Rebuild the application, right click the cloud project and choose “Package…” (if you haven’t set up publishing profile which we will do in our next blog post). Remember to choose the right config file, use debug for staging and release for production so your databases won’t collide. You should see something like this:   2.4 Go to Management Portal and click the Web Services menu, choose your service and click update in the bottom menu.   2.5 Link the newly created database to your application. Click the LINKED RESOURCES in the top menu and then click “Link” in the bottom menu. You should get something like this. 3. Alright then. Under the Dashboard you can find the link to your application. Click it to open it in a browser and then go to ~/Comments to try it out just the way we did locally. Success and end of this story!

  Read the article

< Previous Page | 745 746 747 748 749 750 751 752 753 754 755 756  | Next Page >