Search Results

Search found 8842 results on 354 pages for 'plug and play'.

Page 75/354 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

  • Colored Vertical Lines upon boot and nomodeset DOES NOT fix it

    - by user2851032
    I have installed Lubuntu 13.04 on a Dell Inspiron 1501 laptop, rebooted the machine and encountered this problem. I edited the GRUB configuration to remove "quite splash" and enter "nomodeset", updated grub, and everything was fine. I could reboot the machine without any trouble. However, if I unplug the machine, wait a few seconds, and plug it back in, the problem with the colored lines comes back and nomodeset no longer helps to solve the problem. I tried using radeon.modeset=0 instead of nomodeset and that also works on multiple reboots until I unplug the machine and plug it back in. I was finally able to get around the problem by entering "radeon.exapixmaps=0" instead of radeon.modeset=0. I suppose I kind of made up that boot option using some information from an Arch Wiki page. This would work throughout reboots and even if I unplugged the laptop. It was working fine for quite a while. A few weeks later, I had some unrelated issues with the Java iced-tea plugin, and since 13.10 had just come out, I thought I would try upgrading. So upgrading didn't fix the problem with Java, and after unplugging the machine and trying to use it later, I was back to this problem with the black screen and colored vertical lines. I am completely out of ideas on what to try. It took me a week to figure out how to get it working the first time, but the solution I had isn't working anymore.

    Read the article

  • Connecting PS3 dualshock on Ubuntu 14.04 with 3.13.0-34-generic?

    - by 5th Wheel
    The last entries/queries I can find about PS3 dual shock controller are dealing with older kernel versions. It looks like there may still be a problem with using the PS3 dual shock via USB(or bluetooth) with 14.04? I'm only guessing because I get no sign of detection or input when I plug in the USB. When I run dmesg | grep sony [ 4687.762302] sony 0003:054C:0268.0003: can't set operational mode [ 4687.770639] sony: probe of 0003:054C:0268.0003 failed with error -38 So at this point, I don't know if it's worth running : sudo apt-get install xboxdrv I also found this article LINK but it's dated 01/2013. I was considering installing steam, and checking out some of the games. There are a few in particular I want to check out, but I'm afraid of purchasing them and then my controller does not work. I don't have a ps3, I just have the controller for Sixaxis/emulator/Android set up... I see mentions for QTsixa and xboxdrv, but the posts are at least a year old(older distibution/kernels) Ideally, I'd like to just plug in USB, and play. No Bluetooth.

    Read the article

  • NVIDIA X Server TwinView isses with 2 GeForce 8600GT cards

    - by Big Daddy
    Full disclosure, I am relatively new to Linux and loving the learning curve but I am undoubtedly capable of ignorant mistakes I have a rig I am building for my home office desktop. The basics: Gigabyte MB AMD 64bt processor Ubuntu 12.04 64bit two Nvidia GeForce 8600GT video cards using a SLI bridge two 22" DVI input HP monitors So here is my issue (it is driving me nuts) with X Server. If I plug both monitors into GPU 0 X Server auto configures TwinView and all is grand, works like a charm, though both are running off of GPU 0. If I plug one monitor into GPU 0 and one monitor into GPU 1, X Server enables the monitor on GPU 0, sees but keeps the monitor on GPU 1 disabled. My presumption (we all know the saying about presumptions) is that all I would have to do is select the disabled monitor on GPU 1 and drop down the Configure pull down and select TwinView...problem is when the monitors are plugged in this way, the TwinView option is greyed out and can not be selected. What am I not understanding here? Is there some sort of configuration I need to do elsewhere for Ubuntu to utilize both GPU's? Any help will be most appreciated, thanks in advance.

    Read the article

  • Automatic syncing USB HD drive to local HD (different computers)

    - by luri
    I have a desktop PC at work, and a laptop at home.... or elsewhere. What I want to do is use a USB HD to store my documents (about 130 Gb, maybe more). That would serve as backup and also port my files to my laptop. I'd like any of both computers to automatically sync all files there with local copies, so that I can work at either of them and keep updated copies of everything in both (plus the USB drive, which would allow me to work in other computers, too, apart from being another backup). Dropbox ins't a solution for me, due to pricing and 100Gb limit. The workflow would be as follows, to clear things up: I work on PC1. Changes in files are automatically synced to USB whenever a file is modified. I go home and boot PC2. I plug the usb drive and local files are synced (if changed) with the most recent usb copies. While I work at PC2, again, changes in files spread to my USB drive. Whenever I go to PC1 again, I plug my usb and again everything synces. So the questions would be: a) Am I crazy? b) Can it be done? c) Will I have any file conflicts (provided I'm the only one that will modify the files)?

    Read the article

  • How to automount NTFS usb sticks on Xubuntu 12.10?

    - by netimen
    I'm running the Xubuntu 12.10 on a Lenovo T520 laptop. If I plug a FAT formatted usb stick, it's mounted automatically, but if I plug in a NTFS formatted one, I have to mount it manually. How to make NTFS usb sticks to mount automatically when plugged? My /etc/fstab in case it helps: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda5 during installation UUID=cd221c3e-44a8-459e-9dfb-04787f1cd0b6 none swap sw

    Read the article

  • HP dv7 Beats Audio Subwoofer on while headphones plugged in

    - by msilis
    I have looked for answers to this but have not found anything. People have similar problems but mostly with getting the subwoofer to work at all. I got the subwoofer to work by editing the /etc/modprobe.d/alsa-base.conf file and adding options snd-hda-intel model=ref. When I plug in my headphones, the main speakers turn off but the subwoofer still has sound coming through it. The output is selected automatically in sound preferences and is set to headphones when they are plugged in. I also have tried muting the main speakers, which in turn mutes the subwoofer, before plugging in the headphones as they seem to have two different volume controls, but as soon as the headphones are plugged in, the subwoofer has sound coming out of it. I am running Ubuntu 11.10 64 bit on HP dv7- 4285dx. I am able to just not have the subwoofer on but since I have gotten it to work I would like to keep it around and not have to change a config file every time I want to plug in my headphones. Any ideas or suggestions would be greatly appreciated. Thanks

    Read the article

  • How to Run Low-Cost Minecraft on a Raspberry Pi for Block Building on the Cheap

    - by Jason Fitzpatrick
    We’ve shown you how to run your own blocktastic personal Minecraft server on a Windows/OSX box, but what if you crave something lighter weight, more energy efficient, and always ready for your friends? Read on as we turn a tiny Raspberry Pi machine into a low-cost Minecraft server you can leave on 24/7 for around a penny a day. Why Do I Want to Do This? There’s two aspects to this tutorial, running your own Minecraft server and specifically running that Minecraft server on a Raspberry Pi. Why would you want to run your own Minecraft server? It’s a really great way to extend and build upon the Minecraft play experience. You can leave the server running when you’re not playing so friends and family can join and continue building your world. You can mess around with game variables and introduce mods in a way that isn’t possible when you’re playing the stand-alone game. It also gives you the kind of control over your multiplayer experience that using public servers doesn’t, without incurring the cost of hosting a private server on a remote host. While running a Minecraft server on its own is appealing enough to a dedicated Minecraft fan, running it on the Raspberry Pi is even more appealing. The tiny little Pi uses so little resources that you can leave your Minecraft server running 24/7 for a couple bucks a year. Aside from the initial cost outlay of the Pi, an SD card, and a little bit of time setting it up, you’ll have an always-on Minecraft server at a monthly cost of around one gumball. What Do I Need? For this tutorial you’ll need a mix of hardware and software tools; aside from the actual Raspberry Pi and SD card, everything is free. 1 Raspberry Pi (preferably a 512MB model) 1 4GB+ SD card This tutorial assumes that you have already familiarized yourself with the Raspberry Pi and have installed a copy of the Debian-derivative Raspbian on the device. If you have not got your Pi up and running yet, don’t worry! Check out our guide, The HTG Guide to Getting Started with Raspberry Pi, to get up to speed. Optimizing Raspbian for the Minecraft Server Unlike other builds we’ve shared where you can layer multiple projects over one another (e.g. the Pi is more than powerful enough to serve as a weather/email indicator and a Google Cloud Print server at the same time) running a Minecraft server is a pretty intense operation for the little Pi and we’d strongly recommend dedicating the entire Pi to the process. Minecraft seems like a simple game, with all its blocky-ness and what not, but it’s actually a pretty complex game beneath the simple skin and required a lot of processing power. As such, we’re going to tweak the configuration file and other settings to optimize Rasbian for the job. The first thing you’ll need to do is dig into the Raspi-Config application to make a few minor changes. If you’re installing Raspbian fresh, wait for the last step (which is the Raspi-Config), if you already installed it, head to the terminal and type in “sudo raspi-config” to launch it again. One of the first and most important things we need to attend to is cranking up the overclock setting. We need all the power we can get to make our Minecraft experience enjoyable. In Raspi-Config, select option number 7 “Overclock”. Be prepared for some stern warnings about overclocking, but rest easy knowing that overclocking is directly supported by the Raspberry Pi foundation and has been included in the configuration options since late 2012. Once you’re in the actual selection screen, select “Turbo 1000MhHz”. Again, you’ll be warned that the degree of overclocking you’ve selected carries risks (specifically, potential corruption of the SD card, but no risk of actual hardware damage). Click OK and wait for the device to reset. Next, make sure you’re set to boot to the command prompt, not the desktop. Select number 3 “Enable Boot to Desktop/Scratch”  and make sure “Console Text console” is selected. Back at the Raspi-Config menu, select number 8 “Advanced Options’. There are two critical changes we need to make in here and one option change. First, the critical changes. Select A3 “Memory Split”: Change the amount of memory available to the GPU to 16MB (down from the default 64MB). Our Minecraft server is going to ruin in a GUI-less environment; there’s no reason to allocate any more than the bare minimum to the GPU. After selecting the GPU memory, you’ll be returned to the main menu. Select “Advanced Options” again and then select A4 “SSH”. Within the sub-menu, enable SSH. There is very little reason to keep this Pi connected to a monitor and keyboard, by enabling SSH we can remotely access the machine from anywhere on the network. Finally (and optionally) return again to the “Advanced Options” menu and select A2 “Hostname”. Here you can change your hostname from “raspberrypi” to a more fitting Minecraft name. We opted for the highly creative hostname “minecraft”, but feel free to spice it up a bit with whatever you feel like: creepertown, minecraft4life, or miner-box are all great minecraft server names. That’s it for the Raspbian configuration tab down to the bottom of the main screen and select “Finish” to reboot. After rebooting you can now SSH into your terminal, or continue working from the keyboard hooked up to your Pi (we strongly recommend switching over to SSH as it allows you to easily cut and paste the commands). If you’ve never used SSH before, check out how to use PuTTY with your Pi here. Installing Java on the Pi The Minecraft server runs on Java, so the first thing we need to do on our freshly configured Pi is install it. Log into your Pi via SSH and then, at the command prompt, enter the following command to make a directory for the installation: sudo mkdir /java/ Now we need to download the newest version of Java. At the time of this publication the newest release is the OCT 2013 update and the link/filename we use will reflect that. Please check for a more current version of the Linux ARMv6/7 Java release on the Java download page and update the link/filename accordingly when following our instructions. At the command prompt, enter the following command: sudo wget --no-check-certificate http://www.java.net/download/jdk8/archive/b111/binaries/jdk-8-ea-b111-linux-arm-vfp-hflt-09_oct_2013.tar.gz Once the download has finished successfully, enter the following command: sudo tar zxvf jdk-8-ea-b111-linux-arm-vfp-hflt-09_oct_2013.tar.gz -C /opt/ Fun fact: the /opt/ directory name scheme is a remnant of early Unix design wherein the /opt/ directory was for “optional” software installed after the main operating system; it was the /Program Files/ of the Unix world. After the file has finished extracting, enter: sudo /opt/jdk1.8.0/bin/java -version This command will return the version number of your new Java installation like so: java version "1.8.0-ea" Java(TM) SE Runtime Environment (build 1.8.0-ea-b111) Java HotSpot(TM) Client VM (build 25.0-b53, mixed mode) If you don’t see the above printout (or a variation thereof if you’re using a newer version of Java), try to extract the archive again. If you do see the readout, enter the following command to tidy up after yourself: sudo rm jdk-8-ea-b111-linux-arm-vfp-hflt-09_oct_2013.tar.gz At this point Java is installed and we’re ready to move onto installing our Minecraft server! Installing and Configuring the Minecraft Server Now that we have a foundation for our Minecraft server, it’s time to install the part that matter. We’ll be using SpigotMC a lightweight and stable Minecraft server build that works wonderfully on the Pi. First, grab a copy of the the code with the following command: sudo wget http://ci.md-5.net/job/Spigot/lastSuccessfulBuild/artifact/Spigot-Server/target/spigot.jar This link should remain stable over time, as it points directly to the most current stable release of Spigot, but if you have any issues you can always reference the SpigotMC download page here. After the download finishes successfully, enter the following command: sudo /opt/jdk1.8.0/bin/java -Xms256M -Xmx496M -jar /home/pi/spigot.jar nogui Note: if you’re running the command on a 256MB Pi change the 256 and 496 in the above command to 128 and 256, respectively. Your server will launch and a flurry of on-screen activity will follow. Be prepared to wait around 3-6 minutes or so for the process of setting up the server and generating the map to finish. Future startups will take much less time, around 20-30 seconds. Note: If at any point during the configuration or play process things get really weird (e.g. your new Minecraft server freaks out and starts spawning you in the Nether and killing you instantly), use the “stop” command at the command prompt to gracefully shutdown the server and let you restart and troubleshoot it. After the process has finished, head over to the computer you normally play Minecraft on, fire it up, and click on Multiplayer. You should see your server: If your world doesn’t popup immediately during the network scan, hit the Add button and manually enter the address of your Pi. Once you connect to the server, you’ll see the status change in the server status window: According to the server, we’re in game. According to the actual Minecraft app, we’re also in game but it’s the middle of the night in survival mode: Boo! Spawning in the dead of night, weaponless and without shelter is no way to start things. No worries though, we need to do some more configuration; no time to sit around and get shot at by skeletons. Besides, if you try and play it without some configuration tweaks first, you’ll likely find it quite unstable. We’re just here to confirm the server is up, running, and accepting incoming connections. Once we’ve confirmed the server is running and connectable (albeit not very playable yet), it’s time to shut down the server. Via the server console, enter the command “stop” to shut everything down. When you’re returned to the command prompt, enter the following command: sudo nano server.properties When the configuration file opens up, make the following changes (or just cut and paste our config file minus the first two lines with the name and date stamp): #Minecraft server properties #Thu Oct 17 22:53:51 UTC 2013 generator-settings= #Default is true, toggle to false allow-nether=false level-name=world enable-query=false allow-flight=false server-port=25565 level-type=DEFAULT enable-rcon=false force-gamemode=false level-seed= server-ip= max-build-height=256 spawn-npcs=true white-list=false spawn-animals=true texture-pack= snooper-enabled=true hardcore=false online-mode=true pvp=true difficulty=1 player-idle-timeout=0 gamemode=0 #Default 20; you only need to lower this if you're running #a public server and worried about loads. max-players=20 spawn-monsters=true #Default is 10, 3-5 ideal for Pi view-distance=5 generate-structures=true spawn-protection=16 motd=A Minecraft Server In the server status window, seen through your SSH connection to the pi, enter the following command to give yourself operator status on your Minecraft server (so that you can use more powerful commands in game, without always returning to the server status window). op [your minecraft nickname] At this point things are looking better but we still have a little tweaking to do before the server is really enjoyable. To that end, let’s install some plugins. The first plugin, and the one you should install above all others, is NoSpawnChunks. To install the plugin, first visit the NoSpawnChunks webpage and grab the download link for the most current version. As of this writing the current release is v0.3. Back at the command prompt (the command prompt of your Pi, not the server console–if your server is still active shut it down) enter the following commands: cd /home/pi/plugins sudo wget http://dev.bukkit.org/media/files/586/974/NoSpawnChunks.jar Next, visit the ClearLag plugin page, and grab the latest link (as of this tutorial, it’s v2.6.0). Enter the following at the command prompt: sudo wget http://dev.bukkit.org/media/files/743/213/Clearlag.jar Because the files aren’t compressed in a .ZIP or similar container, that’s all there is to it: the plugins are parked in the plugin directory. (Remember this for future plugin downloads, the file needs to be whateverplugin.jar, so if it’s compressed you need to uncompress it in the plugin directory.) Resart the server: sudo /opt/jdk1.8.0/bin/java -Xms256M -Xmx496M -jar /home/pi/spigot.jar nogui Be prepared for a slightly longer startup time (closer to the 3-6 minutes and much longer than the 30 seconds you just experienced) as the plugins affect the world map and need a minute to massage everything. After the spawn process finishes, type the following at the server console: plugins This lists all the plugins currently active on the server. You should see something like this: If the plugins aren’t loaded, you may need to stop and restart the server. After confirming your plugins are loaded, go ahead and join the game. You should notice significantly snappier play. In addition, you’ll get occasional messages from the plugins indicating they are active, as seen below: At this point Java is installed, the server is installed, and we’ve tweaked our settings for for the Pi.  It’s time to start building with friends!     

    Read the article

  • XNA 3D model collision is inaccurate

    - by Daniel Lopez
    I am creating a classic game in 3d that deals with asteriods and you have to shoot them and avoid being hit from them. I can generate the asteroids just fine and the ship can shoot bullets just fine. But the asteroids always hit the ship even it doesn't look they are even close. I know 2D collision very well but not 3D so can someone please shed some light to my problem. Thanks in advance. Code For ModelRenderer: using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace _3D_Asteroids { class ModelRenderer { private float aspectratio; private Model model; private Vector3 camerapos; private Vector3 modelpos; private Matrix rotationy; float radiansy = 0; private bool isalive; public ModelRenderer(Model m, float AspectRatio, Vector3 initial_pos, Vector3 initialcamerapos) { isalive = true; model = m; if (model.Meshes.Count == 0) { throw new Exception("Invalid model because it contains zero meshes!"); } modelpos = initial_pos; camerapos = initialcamerapos; aspectratio = AspectRatio; return; } public float RadiusOfSphere { get { return model.Meshes[0].BoundingSphere.Radius; } } public BoundingBox BoxBounds { get { return BoundingBox.CreateFromSphere(model.Meshes[0].BoundingSphere); } } public BoundingSphere SphereBounds { get { return model.Meshes[0].BoundingSphere; } } public Vector3 CameraPosition { set { camerapos = value; } get { return camerapos; } } public bool IsAlive { get { return isalive; } } public Vector3 ModelPosition { set { modelpos = value; } get { return modelpos; } } public void RotateY(float radians) { radiansy += radians; rotationy = Matrix.CreateRotationY(radiansy); } public Matrix RotationY { set { rotationy = value; } get { return rotationy; } } public float AspectRatio { set { aspectratio = value; } get { return aspectratio; } } public void Kill() { isalive = false; } public void Draw(float scale) { Matrix world; if (rotationy == new Matrix(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)) { world = Matrix.CreateScale(scale) * Matrix.CreateTranslation(modelpos); } else { world = rotationy * Matrix.CreateScale(scale) * Matrix.CreateTranslation(modelpos); } Matrix view = Matrix.CreateLookAt(camerapos, Vector3.Zero, Vector3.Up); Matrix projection = Matrix.CreatePerspectiveFieldOfView(MathHelper.ToRadians(45.0f), this.AspectRatio, 1f, 100000f); foreach (ModelMesh mesh in model.Meshes) { foreach (BasicEffect effect in mesh.Effects) { effect.World = world; effect.View = view; effect.Projection = projection; } mesh.Draw(); } } public void Draw() { Matrix world; if (rotationy == new Matrix(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)) { world = Matrix.CreateTranslation(modelpos); } else { world = rotationy * Matrix.CreateTranslation(modelpos); } Matrix view = Matrix.CreateLookAt(camerapos, Vector3.Zero, Vector3.Up); Matrix projection = Matrix.CreatePerspectiveFieldOfView(MathHelper.ToRadians(45.0f), this.AspectRatio, 1f, 100000f); foreach (ModelMesh mesh in model.Meshes) { foreach (BasicEffect effect in mesh.Effects) { effect.World = world; effect.View = view; effect.Projection = projection; } mesh.Draw(); } } } Code For Game1: using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace _3D_Asteroids { /// <summary> /// This is the main type for your game /// </summary> public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; int score = 0, lives = 5; SpriteBatch spriteBatch; GameState gstate = GameState.OnMenuScreen; Menu menu = new Menu(Color.Yellow, Color.White); SpriteFont font; Texture2D background; ModelRenderer ship; Model b, a; List<ModelRenderer> bullets = new List<ModelRenderer>(); List<ModelRenderer> asteriods = new List<ModelRenderer>(); float time = 0.0f; int framecount = 0; SoundEffect effect; public Game1() { graphics = new GraphicsDeviceManager(this); graphics.PreferredBackBufferWidth = 1280; graphics.PreferredBackBufferHeight = 796; graphics.ApplyChanges(); Content.RootDirectory = "Content"; } /// <summary> /// Allows the game to perform any initialization it needs to before starting to run. /// This is where it can query for any required services and load any non-graphic /// related content. Calling base.Initialize will enumerate through any components /// and initialize them as well. /// </summary> protected override void Initialize() { // TODO: Add your initialization logic here base.Initialize(); } /// <summary> /// LoadContent will be called once per game and is the place to load /// all of your content. /// </summary> protected override void LoadContent() { // Create a new SpriteBatch, which can be used to draw textures. spriteBatch = new SpriteBatch(GraphicsDevice); font = Content.Load<SpriteFont>("Fonts\\Lucida Console"); background = Content.Load<Texture2D>("Textures\\B1_stars"); Model p1 = Content.Load<Model>("Models\\p1_wedge"); b = Content.Load<Model>("Models\\pea_proj"); a = Content.Load<Model>("Models\\asteroid1"); effect = Content.Load<SoundEffect>("Audio\\tx0_fire1"); ship = new ModelRenderer(p1, GraphicsDevice.Viewport.AspectRatio, new Vector3(0, 0, 0), new Vector3(0, 0, 9000)); } /// <summary> /// UnloadContent will be called once per game and is the place to unload /// all content. /// </summary> protected override void UnloadContent() { } /// <summary> /// Allows the game to run logic such as updating the world, /// checking for collisions, gathering input, and playing audio. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Update(GameTime gameTime) { KeyboardState state = Keyboard.GetState(PlayerIndex.One); switch (gstate) { case GameState.OnMenuScreen: { if (state.IsKeyDown(Keys.Enter)) { switch (menu.SelectedChoice) { case MenuChoices.Play: { gstate = GameState.GameStarted; break; } case MenuChoices.Exit: { this.Exit(); break; } } } if (state.IsKeyDown(Keys.Down)) { menu.MoveSelectedMenuChoiceDown(gameTime); } else if(state.IsKeyDown(Keys.Up)) { menu.MoveSelectedMenuChoiceUp(gameTime); } else { menu.KeysReleased(); } break; } case GameState.GameStarted: { foreach (ModelRenderer bullet in bullets) { if (bullet.ModelPosition.X < (ship.ModelPosition.X + 4000) && bullet.ModelPosition.Z < (ship.ModelPosition.X + 4000) && bullet.ModelPosition.X > (ship.ModelPosition.Z - 4000) && bullet.ModelPosition.Z > (ship.ModelPosition.Z - 4000)) { bullet.ModelPosition += (bullet.RotationY.Forward * 120); } else if (collidedwithasteriod(bullet)) { bullet.Kill(); } else { bullet.Kill(); } } foreach (ModelRenderer asteroid in asteriods) { if (ship.SphereBounds.Intersects(asteroid.BoxBounds)) { lives -= 1; asteroid.Kill(); // This always hits no matter where the ship goes. } else { asteroid.ModelPosition -= (asteroid.RotationY.Forward * 50); } } for (int index = 0; index < asteriods.Count; index++) { if (asteriods[index].IsAlive == false) { asteriods.RemoveAt(index); } } for (int index = 0; index < bullets.Count; index++) { if (bullets[index].IsAlive == false) { bullets.RemoveAt(index); } } if (state.IsKeyDown(Keys.Left)) { ship.RotateY(0.1f); if (state.IsKeyDown(Keys.Space)) { if (time < 17) { firebullet(); //effect.Play(); } } else { time = 0; } } else if (state.IsKeyDown(Keys.Right)) { ship.RotateY(-0.1f); if (state.IsKeyDown(Keys.Space)) { if (time < 17) { firebullet(); //effect.Play(); } } else { time = 0; } } else if (state.IsKeyDown(Keys.Up)) { ship.ModelPosition += (ship.RotationY.Forward * 50); if (state.IsKeyDown(Keys.Space)) { if (time < 17) { firebullet(); //effect.Play(); } } else { time = 0; } } else if (state.IsKeyDown(Keys.Space)) { time += gameTime.ElapsedGameTime.Milliseconds; if (time < 17) { firebullet(); //effect.Play(); } } else { time = 0.0f; } if ((framecount % 60) == 0) { createasteroid(); framecount = 0; } framecount++; break; } } base.Update(gameTime); } void firebullet() { if (bullets.Count < 3) { ModelRenderer bullet = new ModelRenderer(b, GraphicsDevice.Viewport.AspectRatio, ship.ModelPosition, new Vector3(0, 0, 9000)); bullet.RotationY = ship.RotationY; bullets.Add(bullet); } } void createasteroid() { if (asteriods.Count < 2) { Random random = new Random(); float z = random.Next(-13000, -11000); float x = random.Next(-9000, -8000); Random random2 = new Random(); int degrees = random.Next(0, 45); float radians = MathHelper.ToRadians(degrees); ModelRenderer asteroid = new ModelRenderer(a, GraphicsDevice.Viewport.AspectRatio, new Vector3(x, 0, z), new Vector3(0,0, 9000)); asteroid.RotateY(radians); asteriods.Add(asteroid); } } /// <summary> /// This is called when the game should draw itself. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); switch (gstate) { case GameState.OnMenuScreen: { spriteBatch.Begin(); spriteBatch.Draw(background, Vector2.Zero, Color.White); menu.DrawMenu(ref spriteBatch, font, new Vector2(GraphicsDevice.Viewport.Width / 2, GraphicsDevice.Viewport.Height / 2) - new Vector2(50f), 100f); spriteBatch.End(); break; } case GameState.GameStarted: { spriteBatch.Begin(); spriteBatch.Draw(background, Vector2.Zero, Color.White); spriteBatch.DrawString(font, "Score: " + score.ToString() + "\nLives: " + lives.ToString(), Vector2.Zero, Color.White); spriteBatch.End(); ship.Draw(); foreach (ModelRenderer bullet in bullets) { bullet.Draw(); } foreach (ModelRenderer asteroid in asteriods) { asteroid.Draw(0.1f); } break; } } base.Draw(gameTime); } bool collidedwithasteriod(ModelRenderer bullet) { foreach (ModelRenderer asteroid in asteriods) { if (bullet.SphereBounds.Intersects(asteroid.BoxBounds)) { score += 10; asteroid.Kill(); return true; } } return false; } } } }

    Read the article

  • More Great Improvements to the Windows Azure Management Portal

    - by ScottGu
    Over the last 3 weeks we’ve released a number of enhancements to the new Windows Azure Management Portal.  These new capabilities include: Localization Support for 6 languages Operation Log Support Support for SQL Database Metrics Virtual Machine Enhancements (quick create Windows + Linux VMs) Web Site Enhancements (support for creating sites in all regions, private github repo deployment) Cloud Service Improvements (deploy from storage account, configuration support of dedicated cache) Media Service Enhancements (upload, encode, publish, stream all from within the portal) Virtual Networking Usability Enhancements Custom CNAME support with Storage Accounts All of these improvements are now live in production and available to start using immediately.  Below are more details on them: Localization Support The Windows Azure Portal now supports 6 languages – English, German, Spanish, French, Italian and Japanese. You can easily switch between languages by clicking on the Avatar bar on the top right corner of the Portal: Selecting a different language will automatically refresh the UI within the portal in the selected language: Operation Log Support The Windows Azure Portal now supports the ability for administrators to review the “operation logs” of the services they manage – making it easy to see exactly what management operations were performed on them.  You can query for these by selecting the “Settings” tab within the Portal and then choosing the “Operation Logs” tab within it.  This displays a filter UI that enables you to query for operations by date and time: As of the most recent release we now show logs for all operations performed on Cloud Services and Storage Accounts.  You can click on any operation in the list and click the “Details” button in the command bar to retrieve detailed status about it.  This now makes it possible to retrieve details about every management operation performed. In future updates you’ll see us extend the operation log capability to apply to all Windows Azure Services – which will enable great post-mortem and audit support. Support for SQL Database Metrics You can now monitor the number of successful connections, failed connections and deadlocks in your SQL databases using the new “Dashboard” view provided on each SQL Database resource: Additionally, if the database is added as a “linked resource” to a Web Site or Cloud Service, monitoring metrics for the linked SQL database are shown along with the Web Site or Cloud Service metrics in the dashboard. This helps with viewing and managing aggregated information across both resources in your application. Enhancements to Virtual Machines The most recent Windows Azure Portal release brings with it some nice usability improvements to Virtual Machines: Integrated Quick Create experience for Windows and Linux VMs Creating a new Windows or Linux VM is now easy using the new “Quick Create” experience in the Portal: In addition to Windows VM templates you can also now select Linux image templates in the quick create UI: This makes it incredibly easy to create a new Virtual Machine in only a few seconds. Enhancements to Web Sites Prior to this past month’s release, users were forced to choose a single geographical region when creating their first site.  After that, subsequent sites could only be created in that same region.  This restriction has now been removed, and you can now create sites in any region at any time and have up to 10 free sites in each supported region: One of the new regions we’ve recently opened up is the “East Asia” region.  This allows you to now deploy sites to North America, Europe and Asia simultaneously.  Private GitHub Repository Support This past week we also enabled Git based continuous deployment support for Web Sites from private GitHub and BitBucket repositories (previous to this you could only enable this with public repositories).  Enhancements to Cloud Services Experience The most recent Windows Azure Portal release brings with it some nice usability improvements to Cloud Services: Deploy a Cloud Service from a Windows Azure Storage Account The Windows Azure Portal now supports deploying an application package and configuration file stored in a blob container in Windows Azure Storage. The ability to upload an application package from storage is available when you custom create, or upload to, or update a cloud service deployment. To upload an application package and configuration, create a Cloud Service, then select the file upload dialog, and choose to upload from a Windows Azure Storage Account: To upload an application package from storage, click the “FROM STORAGE” button and select the application package and configuration file to use from the new blob storage explorer in the portal. Configure Windows Azure Caching in a caching enabled cloud service If you have deployed the new dedicated cache within a cloud service role, you can also now configure the cache settings in the portal by navigating to the configuration tab of for your Cloud Service deployment. The configuration experience is similar to the one in Visual Studio when you create a cloud service and add a caching role.  The portal now allows you to add or remove named caches and change the settings for the named caches – all from within the Portal and without needing to redeploy your application. Enhancements to Media Services You can now upload, encode, publish, and play your video content directly from within the Windows Azure Portal.  This makes it incredibly easy to get started with Windows Azure Media Services and perform common tasks without having to write any code. Simply navigate to your media service and then click on the “Content” tab.  All of the media content within your media service account will be listed here: Clicking the “upload” button within the portal now allows you to upload a media file directly from your computer: This will cause the video file you chose from your local file-system to be uploaded into Windows Azure.  Once uploaded, you can select the file within the content tab of the Portal and click the “Encode” button to transcode it into different streaming formats: The portal includes a number of pre-set encoding formats that you can easily convert media content into: Once you select an encoding and click the ok button, Windows Azure Media Services will kick off an encoding job that will happen in the cloud (no need for you to stand-up or configure a custom encoding server).  When it’s finished, you can select the video in the “Content” tab and then click PUBLISH in the command bar to setup an origin streaming end-point to it: Once the media file is published you can point apps against the public URL and play the content using Windows Azure Media Services – no need to setup or run your own streaming server.  You can also now select the file and click the “Play” button in the command bar to play it using the streaming endpoint directly within the Portal: This makes it incredibly easy to try out and use Windows Azure Media Services and test out an end-to-end workflow without having to write any code.  Once you test things out you can of course automate it using script or code – providing you with an incredibly powerful Cloud Media platform that you can use. Enhancements to Virtual Network Experience Over the last few months, we have received feedback on the complexity of the Virtual Network creation experience. With these most recent Portal updates, we have added a Quick Create experience that makes the creation experience very simple. All that an administrator now needs to do is to provide a VNET name, choose an address space and the size of the VNET address space. They no longer need to understand the intricacies of the CIDR format or walk through a 4-page wizard or create a VNET / subnet. This makes creating virtual networks really simple: The portal also now has a “Register DNS Server” task that makes it easy to register DNS servers and associate them with a virtual network. Enhancements to Storage Experience The portal now lets you register custom domain names for your Windows Azure Storage Accounts.  To enable this, select a storage resource and then go to the CONFIGURE tab for a storage account, and then click MANAGE DOMAIN on the command bar: Clicking “Manage Domain” will bring up a dialog that allows you to register any CNAME you want: Summary The above features are all now live in production and available to use immediately.  If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using them today.  Visit the Windows Azure Developer Center to learn more about how to build apps with it. One of the other cool features that is now live within the portal is our new Windows Azure Store – which makes it incredibly easy to try and purchase developer services from a variety of partners.  It is an incredibly awesome new capability – and something I’ll be doing a dedicated post about shortly. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

  • Agile Like Jazz

    - by Jeff Certain
    (I’ve been sitting on this for a week or so now, thinking that it needed to be tightened up a bit to make it less rambling. Since that’s clearly not going to happen, reader beware!) I had the privilege of spending around 90 minutes last night sitting and listening to Sonny Rollins play a concert at the Disney Center in LA. If you don’t know who Sonny Rollins is, I don’t know how to explain the experience; if you know who he is, I don’t need to. Suffice it to say that he has been recording professionally for over 50 years, and helped create an entire genre of music. A true master by any definition. One of the most intriguing aspects of a concert like this, however, is watching the master step aside and let the rest of the musicians play. Not just play their parts, but really play… letting them take over the spotlight, to strut their stuff, to soak up enthusiastic applause from the crowd. Maybe a lot of it has to do with the fact that Sonny Rollins has been doing this for more than a half-century. Maybe it has something to do with a kind of patience you learn when you’re on the far side of 80 – and the man can still blow a mean sax for 90 minutes without stopping! Maybe it has to do with the fact that he was out there for the love of the music and the love of the show, not because he had anything to prove to anyone and, I like to think, not for the money. Perhaps it had more to do with the fact that, when you’re at that level of mastery, the other musicians are going to be good. Really good. Whatever the reasons, there was a incredible freedom on that stage – the ability to improvise, for each musician to showcase their own specialization and skills, and them come back to the common theme, back to being on the same page, as it were. All this took place in the same venue that is home to the L.A. Phil. Somehow, I can’t ever see the same kind of free-wheeling improvisation happening in that context. And, since I’m a geek, I started thinking about agility. Rollins has put together a quintet that reflects his own particular style and past. No upright bass or piano for Rollins – drums, bongos, electric guitar and bass guitar along with his sax. It’s not about the mix of instruments. Other trios, quartets, and sextets use different mixes of instruments. New Orleans jazz tends towards trombones instead of sax; some prefer cornet or trumpet. But no matter what the choice of instruments, size matters. Team sizes are something I’ve been thinking about for a while. We’re on a quest to rethink how our teams are organized. They just feel too big, too unwieldy. In fact, they really don’t feel like teams at all. Most of the time, they feel more like collections or people who happen to report to the same manager. I attribute this to a couple factors. One is over-specialization; we have a tendency to have people work in silos. Although the teams are product-focused, within them our developers are both generalists and specialists. On the one hand, we expect them to be able to build an entire vertical slice of the application; on the other hand, each developer tends to be responsible for the vertical slice. As a result, developers often work on their own piece of the puzzle, in isolation. This sort of feels like working on a jigsaw in a group – each person taking a set of colors and piecing them together to reveal a portion of the overall picture. But what inevitably happens when you go to meld all those pieces together? Inevitably, you have some sections that are too big to move easily. These sections end up falling apart under their own weight as you try to move them. Not only that, but there are other challenges – figuring out where that section fits, and how to tie it into the rest of the puzzle. Often, this is when you find a few pieces need to be added – these pieces are “glue,” if you will. The other issue that arises is due to the overhead of maintaining communications in a team. My mother, who worked in IT for around 30 years, once told me that 20% per team member is a good rule of thumb for maintaining communication. While this is a rule of thumb, it seems to imply that any team over about 6 people is going to become less agile simple because of the communications burden. Teams of ten or twelve seem like they fall into the philharmonic organizational model. Complicated pieces of music requiring dozens of players to all be on the same page requires a much different model than the jazz quintet. There’s much less room for improvisation, originality or freedom. (There are probably orchestral musicians who will take exception to this characterization; I’m calling it like I see it from the cheap seats.) And, there’s one guy up front who is running the show, whose job is to keep all of those dozens of players on the same page, to facilitate communications. Somehow, the orchestral model doesn’t feel much like a self-organizing team, either. The first violin may be the best violinist in the orchestra, but they don’t get to perform free-wheeling solos. I’ve never heard of an orchestra getting together for a jam session. But I have heard of teams that organize their work based on the developers available, rather than organizing the developers based on the work required. I have heard of teams where desired functionality is deferred – or worse yet, schedules are missed – because one critical person doesn’t have any bandwidth available. I’ve heard of teams where people simply don’t have the big picture, because there is too much communication overhead for everyone to be aware of everything that is happening on a project. I once heard Paul Rayner say something to the effect of “you have a process that is perfectly designed to give you exactly the results you have.” Given a choice, I want a process that’s much more like jazz than orchestral music. I want a process that doesn’t burden me with lots of forms and checkboxes and stuff. Give me the simplest, most lightweight process that will work – and a smaller team of the best developers I can find. This seems like the kind of process that will get the kind of result I want to be part of.

    Read the article

  • 8 Things You Can Do In Android’s Developer Options

    - by Chris Hoffman
    The Developer Options menu in Android is a hidden menu with a variety of advanced options. These options are intended for developers, but many of them will be interesting to geeks. You’ll have to perform a secret handshake to enable the Developer Options menu in the Settings screen, as it’s hidden from Android users by default. Follow the simple steps to quickly enable Developer Options. Enable USB Debugging “USB debugging” sounds like an option only an Android developer would need, but it’s probably the most widely used hidden option in Android. USB debugging allows applications on your computer to interface with your Android phone over the USB connection. This is required for a variety of advanced tricks, including rooting an Android phone, unlocking it, installing a custom ROM, or even using a desktop program that captures screenshots of your Android device’s screen. You can also use ADB commands to push and pull files between your device and your computer or create and restore complete local backups of your Android device without rooting. USB debugging can be a security concern, as it gives computers you plug your device into access to your phone. You could plug your device into a malicious USB charging port, which would try to compromise you. That’s why Android forces you to agree to a prompt every time you plug your device into a new computer with USB debugging enabled. Set a Desktop Backup Password If you use the above ADB trick to create local backups of your Android device over USB, you can protect them with a password with the Set a desktop backup password option here. This password encrypts your backups to secure them, so you won’t be able to access them if you forget the password. Disable or Speed Up Animations When you move between apps and screens in Android, you’re spending some of that time looking at animations and waiting for them to go away. You can disable these animations entirely by changing the Window animation scale, Transition animation scale, and Animator duration scale options here. If you like animations but just wish they were faster, you can speed them up. On a fast phone or tablet, this can make switching between apps nearly instant. If you thought your Android phone was speedy before, just try disabling animations and you’ll be surprised how much faster it can seem. Force-Enable FXAA For OpenGL Games If you have a high-end phone or tablet with great graphics performance and you play 3D games on it, there’s a way to make those games look even better. Just go to the Developer Options screen and enable the Force 4x MSAA option. This will force Android to use 4x multisample anti-aliasing in OpenGL ES 2.0 games and other apps. This requires more graphics power and will probably drain your battery a bit faster, but it will improve image quality in some games. This is a bit like force-enabling antialiasing using the NVIDIA Control Panel on a Windows gaming PC. See How Bad Task Killers Are We’ve written before about how task killers are worse than useless on Android. If you use a task killer, you’re just slowing down your system by throwing out cached data and forcing Android to load apps from system storage whenever you open them again. Don’t believe us? Enable the Don’t keep activities option on the Developer options screen and Android will force-close every app you use as soon as you exit it. Enable this app and use your phone normally for a few minutes — you’ll see just how harmful throwing out all that cached data is and how much it will slow down your phone. Don’t actually use this option unless you want to see how bad it is! It will make your phone perform much more slowly — there’s a reason Google has hidden these options away from average users who might accidentally change them. Fake Your GPS Location The Allow mock locations option allows you to set fake GPS locations, tricking Android into thinking you’re at a location where you actually aren’t. Use this option along with an app like Fake GPS location and you can trick your Android device and the apps running on it into thinking you’re at locations where you actually aren’t. How would this be useful? Well, you could fake a GPS check-in at a location without actually going there or confuse your friends in a location-tracking app by seemingly teleporting around the world. Stay Awake While Charging You can use Android’s Daydream Mode to display certain apps while charging your device. If you want to force Android to display a standard Android app that hasn’t been designed for Daydream Mode, you can enable the Stay awake option here. Android will keep your device’s screen on while charging and won’t turn it off. It’s like Daydream Mode, but can support any app and allows users to interact with them. Show Always-On-Top CPU Usage You can view CPU usage data by toggling the Show CPU usage option to On. This information will appear on top of whatever app you’re using. If you’re a Linux user, the three numbers on top probably look familiar — they represent the system load average. From left to right, the numbers represent your system load over the last one, five, and fifteen minutes. This isn’t the kind of thing you’d want enabled most of the time, but it can save you from having to install third-party floating CPU apps if you want to see CPU usage information for some reason. Most of the other options here will only be useful to developers debugging their Android apps. You shouldn’t start changing options you don’t understand. If you want to undo any of these changes, you can quickly erase all your custom options by sliding the switch at the top of the screen to Off.     

    Read the article

  • Stream Media from Windows 7 to XP with VLC Media Player

    - by DigitalGeekery
    So you’ve got yourself a new computer with Windows 7 and you’re itching to take advantage of it’s ability to stream media across your home network. But, the rest of the family is still on Windows XP and you’re not quite ready to shell out the cash for the upgrades. Well, today we’ll show you how to easily stream media from Windows 7 to Windows XP with VLC Media Player. On the host computer running Windows 7, you’ll need to have an account set up with both a username and password. A blank password will not work. The media files will need to be located in a shared folder. Note: If the media files are located within the Public directory, or within the profile of the user account you use to log into the Windows 7 computer, they will be shared automatically. Sharing your Media Folders On your Windows 7 computer, right-click on the folder containing the files you’d like to stream and choose Properties.     On the Sharing Tab of the folder properties, click the Share button. Click OK.   Type or select from the drop down the user account you’ll use to log in, or select “Everyone” to share with all users. Then click Add. You may change the permission level, but only Read permission is required to play the media. Repeat this process for any additional folders you wish to share.    The Windows XP Client Computer Now that we’ve shared our media folders from the Windows 7 computer, we’re ready to play our files on the Windows XP computer. Download and install the VLC Media Player. (See link below) Then open VLC. Click on Media from the and select Open File… Browse your network for the shared folder that contains your media.   You’ll be prompted to log in to the host computer. Provide the credentials for a user on the Windows 7 computer. Click OK.   Select your media file and click Open.    Your media playback will begin momentarily.   This is a nice and easy way to stream media across your home network without upgrading multiple computers to Windows 7.  Plus, VLC is certainly no slouch as a Media Player. It’ll play virtually any video or audio file you can throw at it. Have you already upgraded all your home PCs to Windows 7? Check out our previous article on streaming media between Windows 7 computers on your home network. Download VLC Media Player Similar Articles Productive Geek Tips Fixing When Windows Media Player Library Won’t Let You Add FilesShare Digital Media With Other Computers on a Home Network with Windows 7Enable Media Streaming in Windows Home Server to Windows Media PlayerInstall and Use the VLC Media Player on Ubuntu LinuxInstalling Windows Media Player Plugin for Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Need Help with Your Home Network? Awesome Lyrics Finder for Winamp & Windows Media Player Download Videos from Hulu Pixels invade Manhattan Convert PDF files to ePub to read on your iPad Hide Your Confidential Files Inside Images

    Read the article

  • How To Rip an Audio CD to FLAC with Foobar2000

    - by Mysticgeek
    Foobar2000 is a great audio player that is fully customizable, is light on system resources, and contains a lot of tools and features. Today we show you how to use it to rip an audio CD to FLAC format. Note: For this tutorial we’re going to assume this is the first time you’re ripping a disc with Foobar2000. We’re running it on Windows 7 Ultimate 64-bit. Install Foobar2000 and FLAC First download and install Foobar2000 (link below). The main thing you’ll want to make sure to enable during the install process is Audio CD Support… And the freedb Tagger which are located under Optional Features, then continue through the rest of the install wizard. Next you need to install the latest version of the FLAC codec (link below) following the defaults. Rip Audio CD To rip a CD, place it in your CDROM drive, launch Foobar2000 and click File \ Open Audio CD. Select the appropriate CD drive and click the Rip button. Next you’ll want to lookup the disc information with freedb…or you can manually enter in the track data if it’s a custom disc. Select the proper tag information in the freedb tagger window, then click Update files. The data will be entered in, make sure the radio button next to Go to the Converter Setup dialog is selected, and click the Rip button. In the Converter Setup screen, here you can select the output format, where in our case we’re selecting FLAC. In this window you can choose several other options like the output path, merging the tracks into one or individual files…etc. When you have those settings completed click OK. Next you’ll need to find flac.exe which is located wherever you installed it. On our 64-bit Windows 7 system the default path is C:\Program Files (x86)\FLAC Now wait while your CD is ripped and converted to FLAC. You’ll get a Converter Status Report…after you’ve checked it over you can close out of it. If you set the option to show the output files after conversion you can take a look, make sure all tracks were converted, and play them right away if you want. You can play the tracks in Foobar2000 or any player that supports FLAC. If you want to use WMC or WMP see our article on how to play FLAC files in Windows 7 Media Center or Player. That’s all there is to it! If you’re a fan of Foobar2000 and enjoy your music converted to FLAC format, Foobar2000 does the job quite well. There are a lot of customizations and tools you can use in Foobar2000 that we’ll be taking a look at in future articles. For more information check out our look at this fully customizable music player. Foobar2000 run on XP, Vista, and Windows 7 Links Download Foobar2000 Download FLAC Similar Articles Productive Geek Tips Using Ubuntu: What Package Did This File Come From?Easily Change Audio File Formats with XRECODEFoobar2000 is a Fully Customizable Music PlayerConvert Virtually Any Audio Format with XRECODE IIExtract Audio from a Video File with Pazera Free Audio Extractor TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook

    Read the article

  • Microsoft, jQuery, and Templating

    - by Stephen Walther
    About two months ago, John Resig and I met at Café Algiers in Harvard square to discuss how Microsoft can contribute to the jQuery project. Today, Scott Guthrie announced in his second-day MIX keynote that Microsoft is throwing its weight behind jQuery and making it the primary way to develop client-side Ajax applications using Microsoft technologies. What does this announcement mean? It means that Microsoft is shifting its resources to invest in jQuery. Developers on the ASP.NET team are now working full-time to contribute features to the core jQuery library. Furthermore, we are working with other teams at Microsoft to ensure that our technologies work great with jQuery. We are contributing to the open-source jQuery project in the exact same way that any other company or individual from the community can contribute to jQuery. We are writing proposals, submitting the proposals to the jQuery forums, and revising the proposals in response to community feedback. The jQuery team can decide to reject or accept any feature that we propose. Any feature that Microsoft contributes to jQuery will be platform neutral. In other words, Microsoft contributions will benefit PHP and RAILS developers just as much as they benefit ASP.NET developers. Microsoft contributions to jQuery will improve the web for everyone. Contributing Support for Templates to jQuery Core Our first proposal concerns templating. We want to contribute support for templates to jQuery so that JavaScript developers can use jQuery to easily display a set of database records. You can read our templating proposal here: http://wiki.github.com/nje/jquery/jquery-templates-proposal You can download and play with our prototype for templating here: http://github.com/nje/jquery-tmpl The following code illustrates how you can use a template to display a set of products in a bulleted list: <script type="text/javascript"> jQuery(function(){ var products = [ { name: "Product 1", price: 12.99}, { name: "Product 2", price: 9.99}, { name: "Product 3", price: 35.59} ]; $("ul").append("#template", products); }); </script> <script id="template" type="text/html"> <li>{%= name %} - {%= price %}</li> </script> <ul></ul> The template is contained in a SCRIPT element that has a TYPE=”text/html” attribute. Browsers ignore the contents of a SCRIPT element when they don’t understand the content type. Notice that the placeholder {%=...%} is used within the template to indicate where the name and price of a product should appear. The delimiters {%=…%} are used for expressions and the delimiters {%...%} are used for code. Finally, the products are rendered using the template with the call to $(“ul”).append(“#template”, products). The standard jQuery DOM manipulation methods have been modified to support templates. When the page above is rendered, you get the bulleted list displayed in the following figure. Our goal is to keep our proposal for templates as simple as possible. After support for templating has been added to jQuery, plug-in authors can take advantage of templating when building complex data-driven plug-ins such as a DataGrid plug-in. The Ajax Control Toolkit Over 100,000 developers download the Ajax Control Toolkit every month. That’s a mind-boggling number of downloads. We realize that the Ajax Control Toolkit is extremely popular among ASP.NET Web Forms developers and we want to continue to invest in the Ajax Control Toolkit. If you are adding JavaScript interactivity to an ASP.NET Web Forms application, and you don’t want to write JavaScript, then we recommend that you use the server controls in the Ajax Control Toolkit. Using the Ajax Control Toolkit does not require knowledge of JavaScript and the toolkit enables you to build applications with the concepts familiar to ASP.NET Web Forms applications developers. If, however, you are interested in creating client-side interactivity without server controls then we recommend that you use jQuery. We plan to continue to release new versions of the Ajax Control Toolkit every few months. Our goal is to continue to improve the quality of the Ajax Control Toolkit and to make it easier for the community to contribute code, bug fixes, and documentation. The ASP.NET Ajax Library We are moving the ASP.NET Ajax Library into the Ajax Control Toolkit. If you currently use ASP.NET Ajax Library client templates, client data-binding, or the client script loader then you can continue to use these features by downloading the Ajax Control Toolkit. Be aware that our focus with the Ajax Control Toolkit is server-side Ajax.  For client-side Ajax, we are shifting our focus to jQuery. For example, if you have been using ASP.NET Ajax Library client templates then we recommend that you shift to using jQuery instead. Conclusion Our plan is to focus on jQuery as the primary technology for building client-side Ajax applications moving forward. We want to adapt Microsoft technologies to work great with jQuery and we want to contribute features to jQuery that will make the web better for everyone. We are very excited to be working with the jQuery core team.

    Read the article

  • $.fadeTo/fadeOut() operations on Table Rows in IE fail

    - by Rick Strahl
    Here’s a a small problem that one of customers ran into a few days ago: He was playing around with some of the sample code I’ve put out for one of my simple jQuery demos which deals with providing a simple pulse behavior plug-in: $.fn.pulse = function(time) { if (!time) time = 2000; // *** this == jQuery object that contains selections $(this).fadeTo(time, 0.20, function() { $(this).fadeTo(time, 1); }); return this; } it’s a very simplistic plug-in and it works fine for simple pulse animations. However he ran into a problem where it didn’t work when working with tables – specifically pulsing a table row in Internet Explorer. Works fine in FireFox and Chrome, but IE not so much. It also works just fine in IE as long as you don’t try it on tables or table rows specifically. Applying against something like this (an ASP.NET GridView): var sel = $("#gdEntries>tbody>tr") .not(":first-child") // no header .not(":last-child") // no footer .filter(":even") .addClass("gridalternate"); // *** Demonstrate simple plugin sel.pulse(2000); fails in IE. No pulsing happens in any version of IE. After some additional experimentation with single rows and various ways of selecting each and still failing, I’ve come to the conclusion that the various fade operations in jQuery simply won’t work correctly in IE (any version). So even something as ‘elemental’ as this: var el = $("#gdEntries>tbody>tr").get(0);$(el).fadeOut(2000); is not working correctly. The item will stick around for 2 seconds and then magically disappear. Likewise: sel.hide().fadeIn(5000); also doesn’t fade in although the items become immediately visible in IE. Go figure that behavior out. Thanks to a tweet from red_square and a link he provided here is a grid that explains what works and doesn’t in IE (and most last gen browsers) regarding opacity: http://www.quirksmode.org/js/opacity.html It appears from this link that table and row elements can’t be made opaque, but td elements can. This means for the row selections I can force each of the td elements to be selected and then pulse all of those. Once you have the rows it’s easy to explicitly select all the columns in those rows with .find(“td”). Aha the following actually works: var sel = $("#gdEntries>tbody>tr") .not(":first-child") // no header .not(":last-child") // no footer .filter(":even") .addClass("gridalternate"); // *** Demonstrate simple plugin sel.find("td").pulse(2000); A little unintuitive that, but it works. Stay away from <table> and <tr> Fades The moral of the story is – stay away from TR, TH and TABLE fades and opacity. If you have to do it on tables use the columns instead and if necessary use .find(“td”) on your row(s) selector to grab all the columns. I’ve been surprised by this uhm relevation, since I use fadeOut in almost every one of my applications for deletion of items and row deletions from grids are not uncommon especially in older apps. But it turns out that fadeOut actually works in terms of behavior: It removes the item when the timeout’s done and because the fade is relatively short lived and I don’t extensively test IE code any more I just never noticed that the fade wasn’t happening. Note – this behavior or rather lack thereof appears to be specific to table table,tr,th elements. I see no problems with other elements like <div> and <li> items. Chalk this one up to another of IE’s shortcomings. Incidentally I’m not the only one who has failed to address this in my simplistic plug-in: The jquery-ui pulsate effect also fails on the table rows in the same way. sel.effect("pulsate", { times: 3 }, 2000); and it also works with the same workaround. If you’re already using jquery-ui definitely use this version of the plugin which provides a few more options… Bottom line: be careful with table based fade operations and remember that if you do need to fade – fade on columns.© Rick Strahl, West Wind Technologies, 2005-2010Posted in jQuery  

    Read the article

  • HTML5 and CSS3 Editing in Windows Live Writer

    - by Rick Strahl
    Windows Live Writer is a wonderful tool for editing blog posts and getting them posted to your blog. What makes it nice is that it has a small set of useful features, plus a simple plug-in model that has spawned many useful add-ins. Small tool with a reasonably decent plug-in model to extend equals a great solution to a simple problem. If you're running Windows, have a blog and aren’t using Live Writer you’re probably doing it wrong…One of Live Writer’s nice features is that it can download your blog’s CSS for preview and edit displays. It lets you edit your content inside of the context of that CSS using the WYSIWYG editor, so your content actually looks very close to what you’ll see on your blog while you’re editing your post. Unfortunately Live Writer renders the HTML content in the Web Browser Control’s  default IE 7 rendering mode. Yeah you read that right: IE 7 is the default for the Web Browser control and most applications that use it, are stuck in this modus unless the application explicitly overrides this default. The Web Browser control does not use the version of Internet Explorer installed on the system (IE 10 on my Win8 machine) but uses IE 7 mode for ‘compatibility’ for old applications.If you are importing your blog’s CSS that may suck if you’re using rich HTML 5 and CSS 3 formatting. Hack the Registry to get Live Writer to render using IE 9 or 10In order to get Live Writer (or any other application that uses the Web Browser Control for that matter) to render you can apply a registry hack that overrides the Web Browser Control engine usage for a specific application. I wrote about this in detail in a previous blog post a couple of years back.Here’s how you can set up Windows Live Writer to render your CSS 3 by making a change in your registry:The above is for setup on a 64 bit machine, where I configure Live Writer which is a 32 bit application for using IE 10 rendering. The keys set are as follows:32bit Configuration on 64 bit machine:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BROWSER_EMULATIONKey: WindowsLiveWriter.exeValue: 9000 or 10000  (IE 9 or 10 respectively) (DWORD value)On a 32 bit only machine: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\Main\FeatureControl\FEATURE_BROWSER_EMULATIONKey: WindowsLiveWriter.exeValue: 9000 or 10000  (IE 9 or 10 respectively) (DWORD value)Use decimal values of 9000, 10000 or 11000 to specify specific versions of Internet Explorer. This is a minor tweak, but it’s nice to actually see my blog posts now with the proper CSS formatting intact. Notice the rounded borders and shadow on the code blocks as well as the overflow-x and scrollbars that show up. In this particular case I can see what the code blocks actually look like in a specific resolution – much better than in the old plain view which just chopped things off at the end of the window frame. There are a few other elements that now show properly in the editor as well including block quotes and note boxes that I occasionally use. It’s minor stuff, but it makes the editing experience better yet and closer to the final things so there are less republish operations than I previously had. Sweet!Note that this approach of putting an IE version override into the registry works with most applications that use the Web Browser control. If you are using the Web Browser control in your own applications, it’s a good idea to switch the browser to a more recent version so you can take advantage of HTML 5 and CSS 3 in your browser displayed content by automatically setting this flag in the registry or as part of the application’s startup routine if not dedicated setup tool is used. At the very least you might set it to 9000 (IE 9) which supports most of the basic CSS3 features and is a decent baseline that works for most Windows 7 and 8 machines. If running pre-IE9, the browser will fall back to IE7 rendering and look bad but at least more recent browsers will see an improved experience.I’m surprised that there aren’t more vendors and third party apps using this feature. You can see in my first screen shot that there are only very few entries in the registry key group on my machine – any other apps use the Web Browser control are using IE7. Go figure. Certainly Windows Live Writer should be writing this key into the registry automatically as part of installation to support this functionality out of the box, but alas since it does not, this registry hack lets you get your way anyway…Resources.reg Files to register Live Write Browser Emulation (set for IE9)Specifying Internet Explorer Version for ApplicationsSnagIt LiveWriter Plug-inDownload Windows Live WriterDownload Windows Live Writer with Chocolatey© Rick Strahl, West Wind Technologies, 2005-2013Posted in Live Writer  Windows   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Five geeky things you must do with your Android Smartphone

    - by Gopinath
    Android is the Windows of next generation. Its open, free, widely adopted and smart enough to outsmart Apple’s iOS. It’s a stolen product and cheap imitation of iOS, but Steve Job’s once quoted saying good artists copy and great artists steal. Alright, this post is not about Android vs iOS or is it really stolen or not. Android is a great OS for mobile devices and it lets you do amazing through mobiles.  In this post I want to write about the geeky things we can do with an Android Smartphone. Control your computer using mobile Assume that it is a lazy weekend and you are on a couch watching movies on a laptop which is a meter away. Now you want to adjust volume or skip a scene/song. How to control your laptop without moving out of couch? Just install Universal Remote free app on your smartphone and start control your computer using phone. Universal Remove app controls computers over Wifi or Bluetooth networks with dedicated remote controls for various media players and applications like YouTube, VLC & Spotify.  The application is very easy to use and works amazingly well in controlling computers. Few of the remote controls provided in the app are – Mouse, Keyboard, Media Controls, Power, Start, Windows Media Player, VLC Player,  YouTube. There is also paid version of this app with additional remotes, but for most of the users Free version is good enough. Stream YouTube videos playing on you mobile to computer You can stream YouTube videos playing on your mobile to computer/smart tv. This is something similar to Apple’s most popular AirPlay feature, but works only with YouTube videos. To start streaming videos install Google’s YouTube Remote on your smartphone, open youtube.com/leanback on your computer  and pair up mobile with computer. Once the pairing is done, videos played on YouTube Remote app will be streamed on to your computer. Access your mobile using any web browser – send/receive SMS, view photos/call logs, etc. Want to control your mobile phone using a computer? Install AirDroid app on your phone and start controlling your phone using computer browser – send and receive messages, view call logs, play music, upload/download files, edit contacts and many more. At times it’s lot of fun to access mobile using a big screen devices like laptops. Launch a webpage on your mobile browser using your computer With Google Chrome to Phone installed on your computer and mobile, you can send links and other information from Chrome browser to your Android device. With a click on Chrome browser, the current webpage of Chrome browser will be automatically launched on Android device. This is very handy when you want to send links, send driving direction to mobile using Google Maps and launch phone dialer with number selected on webpage. Install Apps on mobile using computer To install apps on your smartphone you really don’t need to touch it. Open any web browser, sing in to Google Play with your Google id that is associated with smartphone and start installing apps on to your phone right from the browser. As you browse apps on Google Play store, you find Install button and all you need to do is to just click Install. Google will automatically installs app on your mobile within few seconds.

    Read the article

  • Tweaking Remote Control (In-Kernel LIRC)

    - by Geoff
    I've recently rebuilt my MythTV box using Mythbuntu 12.04, to take advantage of newer hardware (Ivy Bridge). On my previous build I used lirc to manage the remote, i.e. the mapping of key codes - keypresses - application keys; it was quite a journey to learn it all, and I ended up fairly comfortable with how it all worked. What I have: I have a cheap Chinavasion remote and USB dongle, which I've found several articles on; these largely revolve around working with XBMC (interesting, but I don't think directly applicable) and also around getting a Harmony remote to work (it's a Chinavasion CVSB-983 - very useful, since I needed this to get my Harmony 900 working). Mythbuntu 12.04 64-bit MythTV 0.25 (likely irrelevant) How it is right now When I plug this in, it 'just works'. Which is great, except that Ubuntu uses it natively, and prevents some of the button presses from getting through to Myth. For example, I can send a button from the remote that equates to Ctrl-Alt-A (which I assume Ubuntu isn't interested in), and then trap that in Mythfrontend, but the remote's Play button is caught by Ubuntu (which displays a large circle with a line though it, as there's no media player loaded). I understand that this is because lirc is merged into the kernel now, and I like that. What I've done so far: Found the device using lsusb: $ lsusb Bus 001 Device 004: ID 073a:2230 Chaplet Systems, Inc. infrared dongle for remote Found the event device number: $ cat /proc/bus/input/devices I: Bus=0003 Vendor=073a Product=2230 Version=0110 N: Name="HID 073a:2230" P: Phys=usb-0000:00:1a.0-1.2/input0 S: Sysfs=/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5 U: Uniq= H: Handlers=sysrq kbd mouse1 event5 js0 B: PROP=0 B: EV=10001f B: KEY=4c37fff072ff32d bf54445600000000 ffffffffff 30c100b17c007 ffa67bfad951dfff febeffdfffefffff fffffffffffffffe B: REL=343 B: ABS=100030000 B: MSC=10 Tested the input with evtest (I pressed Play): $ sudo evtest /dev/input/event5 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x73a product 0x2230 version 0x110 Input device name: "HID 073a:2230" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 1 (KEY_ESC) Event code 2 (KEY_1) Event code 3 (KEY_2) Event code 4 (KEY_3) Event code 5 (KEY_4) Event code 6 (KEY_5) Event code 7 (KEY_6) <------------snipped lots of 'Event code' lines------------> Testing ... (interrupt to exit) Event: time 1336435683.230656, -------------- SYN_REPORT ------------ Event: time 1336435683.246648, type 4 (EV_MSC), code 4 (MSC_SCAN), value c00cd Event: time 1336435683.246652, type 1 (EV_KEY), code 164 (KEY_PLAYPAUSE), value 0 Event: time 1336435683.246655, -------------- SYN_REPORT ------------ Tested showkey, again for the Play key: $ sudo showkey -s kb mode was RAW [ if you are trying this under X, it might not work since the X server is also reading /dev/console ] press any key (program terminates 10s after last keypress)... 0xe0 0x22 0xe0 0xa2 What I want: I'd like a way to scan the incoming button presses, if the above method isn't correct. I'd like to either remap each button press to something that Ubuntu/Unity will ignore, or even better pass the keypress directly to Myth (I suspect this later is only possible with lirc, but I could be wrong). I would really like to do this with the in-kernel drivers, i.e. without explicitly loading lirc; if that's the way the world is going, I'd rather find a way to map the current behaviour to what I want, rather than forcing the 'old' arrangement of loading lirc outside the kernel. Learning something new is also worthwhile! My guess: I'm assuming that this will require using setkeycodes, but have had trouble finding enough information to configure this. Any help greatly appreciated!

    Read the article

  • Beginner Geek: How to Use Multiple Monitors to Be More Productive

    - by Chris Hoffman
    Many people swear by multiple monitors, whether they’re geeks or just people who need to be productive. Why use just one monitor when you can use two or more and see more at once? Additional monitors allow you to expand your desktop, getting more screen real estate for your open programs. Windows makes it very easy to set up additional monitors, and your computer probably has the necessary ports. Why Use Multiple Monitors? Multiple monitors give you more screen real estate. Hook up multiple monitors to a computer and you can move your mouse back and forth between them, dragging programs between monitors as if you had an extra-large desktop. People who swear by multiple monitors use them to display multiple things on-screen at a time. Rather than Alt+Tabbing and task switching to glance at another window, you can just look over with your eyes and then look back to the program you’re using. Some examples of use cases for multiple monitors include: Coders who want to view their code on one display with the other display reserved for documentation. They can just glance over at the documentation and look back at their primary workspace. Anyone who needs to view something while working. Viewing a web page while writing an email, viewing another document while writing an something, or working with two large spreadsheets and having both visible at once. People who need to keep an eye on information, whether it’s email or up-to-date statistics, while working. Gamers who want to see more of the game world, extending the game across multiple displays. Geeks who just want to watch a video on one screen while doing something else on the other screen. Hooking Up Multiple Monitors Hooking up an additional monitor to your computer should be very simple. Most new computers come with more than one port for a monitor — whether DVI, HDMI, the older VGA port, or a mix. Some computers may include splitter cables that allow you to connect multiple monitors to a single port. Most laptops also come with ports that allow you to hook up an external monitor. Plug a monitor into your laptop’s DVI or VGA port and Windows will allow you to use both your laptop’s integrated display and the external monitor at once. This all depends on the ports your computer has and how your monitor connects. If you have an old VGA monitor lying around and you have a modern laptop with only DVI or HDMI connectors, you may need an adapter that allows you to plug your monitor’s VGA cable into the new port. Be sure to take your computer’s ports into account before you get another monitor for it. Managing Multiple Monitors With Windows Windows makes using multiple monitors easy. Just plug the monitor into the appropriate port on your computer and Windows should automatically extend your desktop onto it. You can now just drag and drop windows between monitors. To control how this works, right-click your Windows desktop and select Screen resolution. Choose an option from the Multiple displays box. The Extend option extends your desktop onto an additional monitor, while the other options are mainly useful if you’re using an additional monitor for presentations — for example, you could mirror your laptop’s desktop onto a large monitor or blank your laptop’s screen while it’s connected to a larger display. Be sure to arrange your monitors properly so Windows understands how your monitors are physically positioned. Windows 8 allows you to extend your Windows taskbar across multiple monitors. You’ll find this option in the taskbar’s options window — right-click the taskbar and select Properties. You can also choose where you want Windows to display taskbar buttons for open programs — on any monitor’s taskbar or only on the taskbar on the associated monitor. Windows 7 doesn’t have these convenient features built-in — your second monitor won’t have a taskbar. To extend your taskbar onto an additional monitor, you’ll need a third-party utility like the free and open-source Dual Monitor Taskbar. If you just have a single monitor, you can also use the Aero Snap feature to quickly place multiple Windows applications side by side. On Windows 7 or 8, press Windows Key + Left or Windows Key + Right to make the current window take up the left or right half of your display. You could also drag any window’s title bar to the left or right edges of your screen and release the window. How useful this feature is depends on your monitor’s size and resolution. If you have a large, high-resolution monitor, it will allow you to see a lot. If you have a smaller laptop monitor with the seemingly standard 1366×768 resolution, you won’t be able to see much of each snapped window at once, so snapping windows may not be practical. Image Credit: Chance Reecher on Flickr, Camp Atterbury Joint Maneuver Training Center on Flickr, Xavier Caballe on Flickr     

    Read the article

  • What Counts For A DBA: ESP

    - by Louis Davidson
    Now I don’t want to get religious here, and I’m not going to, but what I’m going to describe in this ‘What Counts for a DBA’ installment sometimes feels like magic. Often  I will spend hours thinking about the solution to a design issue or coding problem, working diligently to try to come up with a solution and then finally just give up with the feeling that I’m not even qualified to be a data entry clerk, much less a data architect.  At this point I often take a walk (or sometimes a nap), and then it hits me. I realize that I have the answer just sitting in my brain, ready to implement.  This phenomenon is not limited to walks either; it can happen almost any time after I stop my obsession about a problem. I call this phenomena ESP (or Extra-Sensory Programming.)  Another term for this could be ‘sleeping on it’, and while the idiom tends to mean to let time pass to actively think about a problem, sleeping on a problem also lets you relax and let your brain do the work. I first noticed this back in my college days when I would play video games for hours on end. We would get stuck deep in some dungeon unable to find a way out, playing for days on end until we were beaten down tired. Once we gave up and walked away, the solution would usually be there waiting for one of us before we came back to play the next day.  Sometimes it would be in the form of a dream, and sometimes it would just be that the problem was now easy to solve when we started to play again.  While it worked great for video games, it never occurred when I studied English Literature for hours on end, or even when I worked for the same sort of frustrating hours attempting to solve a homework problem in Calculus.  I believe that the difference was that I was passionate about the video game, and certainly far less so about homework where people used the word “thou” instead of “you” or x to represent a number. This phenomenon occurs somewhat more often in my current work as a professional data programmer, because I am very passionate about SQL and love those aspects of my career choice.  Every day that I get to draw a new data model to solve a customer issue, or write a complex SELECT statement to ferret out the answer to a complex data question, is a great day. I hope it is the same for any reader of this blog.  But, unfortunately, while the day on a whole is great, a heck of a lot of noise is generated in work life. There are the typical project deadlines, along with the requisite project manager sitting on your shoulders shouting slogans to try to make you to go faster: Add in office politics, and the occasional family issues that permeate the mind, and you lose the ability to think deeply about any problem, not to mention occasionally forgetting your own name.  These office realities coupled with a difficult SQL problem staring at you from your widescreen monitor will slowly suck the life force out of your body, making it seem impossible to solve the problem This is when the walk starts; or a nap. Maybe you hide from the madness under your desk like George Costanza hides from Steinbrenner on Seinfeld.  Forget about the problem. Free your mind from the insanity of the problem and your surroundings. Then let your training and education deep in your brain take over and see if it will passively do the rest for you. If you don’t end up with a solution, the worst case scenario is that you have a bit of exercise or rest, and you won’t have heard the phrase “better is the enemy of good enough” even once…which certainly will do your brain some good. Once you stop expecting whipping your brain for information, inspiration may just strike and instead of a humdrum solution you find a solution you hadn’t even considered, almost magically. So, my beloved manager, next time you have an urgent deadline and you come across me taking a nap, creep away quietly because I’m working, doing some extra-sensory programming.

    Read the article

  • Indentify Codecs & Technical Information About Video Files

    - by DigitalGeekery
    Have you ever wanted to play an audio or video file but didn’t have the proper codec installed? Today we’ll show how to determine codecs, along with a host of other technical details about your media files with MediaInfo. Installation Download and install MediaInfo. You can find the download link at the bottom of the page. Note: When installing MediaInfo there is a recommended software bundle which you can opt out of by selecting Do not install option. Each recommended software choice may be different, like in this example it offers Spyware Terminator. The cool thing though is they use Open Candy which opts you out of the install. Just double check to make sure you’re not installing extra crapware. Using MediaInfo The first time you run MediaInfo it will display the Preferences window. There are various option such as language, output format, and whether or not you want MediaInfo to check for new versions. Click OK. Select a file or folder to analyze by clicking on the File or Folder icons on the left of the application window or by selecting File > Open from the menu. You can also drag and drop a file directly onto the application. MediaInfo will display details of your media file. In Basic view, you’ll see basic information. Notice in the example below the video and audio codecs, along with file size, running time of the media file, and even the application used to create the video file (Writing application).    You can switch to some of the other views by selecting View from the Menu and choosing form the dropdown list.   Sheet View will present the information a bit more clearly. You can see in the example below that the video and audio codec are listing in clearly identified columns. (AVC is often more commonly referred to H.264.)   Tree View is perhaps the most detailed. You can see from the example below the codec used for this AVI file is XviD.   Scrolling down even further you’ll see additional information like video and audio bit rates, frame rate, aspect ratio, and more.   In Basic View (and also in Sheet view) you can click to find a player for your file. In this instance with an MP4 file, it took me to the download page for Quicktime. This is by no means the only media player for this file, but if you are stuck for how to play a media file, this will forward you to a solution that works. You can do the same thing with Video codec. Click Go to the web site of this video codec to find a download.   MediaInfo is a simple but powerful tool that can be used to discover the details of a media file, or just to find a compatible codec. It works with most any video file type and is available for Windows, Mac, and Linux. Some Mac and Linux versions, however, are currently command line only. Download MediaInfo Similar Articles Productive Geek Tips How to Convert Videos to 3GP for Mobile PhonesFix for VLC Skipping and Lagging Playing High-Def Video FilesUsing VLC Player Under VistaUse Your Mac Mini as a Media Server Part 2How to Play .OGM Video Files in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

    Read the article

  • Working Towards Specialization? Your VAD Can Help You Score!

    - by Kristin Rose
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} TOUCH DOWN! That’s right folks, football is in full swing and what better way to kickoff football season than with a great Oracle play? Partners can now score big by side passing the ball to their VADs, enabling them to help in the process of becoming a Specialized partner. With the new functionality now available on the OPN Competency Center, Partner PRM Administrators can grant access to their VADs and have them assist in achieving their Specialization requirements. Here are the rules of the game: Partner Administrator must provide authorization Details do not include individual users data Access can be removed anytime Follow the steps below to grant your VAD access to your company Specialization progress reports. It’s as simple as 1,2,3…Go team go! Login to the OPN Competency Center and go to “My Preferences” on the top right corner of the screen. Under “My VAD”, select your Region, Country and Value Added Distributor name, then simple click in “ADD VAD”. Your VAD can now access your Specialization Tracker report! For those MVP’s who want to learn more, be sure to watch this 3 minute play by play video on the new OPN Competency Center VAD/VAR Specialization Tracker below, and click here before game day! Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Are You Ready For Some Oracle Football? The OPN Communications Team Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

    Read the article

  • Failed to set the initialPlaybackTime for a MPMoviePlayerController when recreating it in the second

    - by vicky
    Hi, everyone. It's really wired. When at the first time a MPMoviePlayerController (e.g., theMovie) is created, its initialPlaybackTime can be set successfully. But when theMoive is released and re-create a new MPMoviePlayerController, its intialPlaybackTime can not be set correctly, actually the movie always plays from the start. The code is as follows. -(void)initAndPlayMovie:(NSURL *)movieURL { MPMoviePlayerController *theMovie = [[MPMoviePlayerController alloc] initWithContentURL:movieURL]; // create a notification for moviePlaybackFinish [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(moviePlayBackDidFinish:) name:MPMoviePlayerPlaybackDidFinishNotification object:theMovie]; theMovie.initialPlaybackTime = 15; [theMovie setScalingMode:MPMovieScalingModeAspectFill]; [theMovie play];} -(void) moviePlayBackDidFinish:(NSNotification*)notification { MPMoviePlayerController * theMovie = [notification object]; [[NSNotificationCenter defaultCenter] removeObserver:self name:MPMoviePlayerPlaybackDidFinishNotification object:theMovie]; [theMovie release]; [self initAndPlayMovie:[self getMovieURL]]; } With the above code, when the viewcontroller did load and run initAndPlayMovie, the movie starts to play from 15 seconds, but when it plays finished or "Done" is pushed, a new theMovie is created and starts to play from 0 second. Does anybody know what happened with the initialPlaybackTime property of MPMoviePlayerController? And whenever you reload the viewController where the above code is (presentModalViewController from a parent viewcontroller), the movie can start from any playback time. I am really confused what's the difference of the MPMoviePlayerController registration methods between the viewcontroller load and the recreating it after release. Need your help! Thank you!

    Read the article

  • HTML5 video (mp4 and ogv) problems in Safari and Firefox - but Chrome is all good

    - by qryss
    Hi folks, I have the following code: <video width="640" height="360" controls id="video-player" poster="/movies/poster.png"> <source src="/movies/640x360.m4v" type='video/mp4; codecs="avc1.42E01E, mp4a.40.2"'> <source src="/movies/640x360.ogv" type='video/ogg; codecs="theora, vorbis"'> </video> I'm using Rails (Mongrel in development and Mongrel+Apache in production). Chrome (Mac and Win) can play either file (tested by one then the other source tags) whether locally or from my production servers. Safari (Mac and Win) can play the mp4 file fine locally but not from production. Firefox 3.6 won't play the video in either OS. I just get a grey cross in the middle of the video player area. I've made sure that both Mongrel and Apache in each case have the right MIME types set. From Chrome's results I know there is nothing inherently wrong with my video files or the way the files are being asked for or delivered. Anyone got any clues? Or even a clue as to how to diagnose the problem? For Firefox I looked at https://developer.mozilla.org/En/Using_audio_and_video_in_Firefox where it refers to an 'error' event and an 'error' attribute. It seems the 'error' event is thrown pretty well straightaway and at that time there is no error attribute. Very helpful... :( Help enormously appreciated! Thanks in advance... Chris

    Read the article

  • How to Global onRouteRequest directly to onBadRequest?

    - by virtualeyes
    EDIT Came up with this to sanitize URI date params prior to passing off to Play router val ymdMatcher = "\\d{8}".r // matcher for yyyyMMdd URI param val ymdFormat = org.joda.time.format.DateTimeFormat.forPattern("yyyyMMdd") def ymd2Date(ymd: String) = ymdFormat.parseDateTime(ymd) override def onRouteRequest(r: RequestHeader): Option[Handler] = { import play.api.i18n.Messages ymdMatcher.findFirstIn(r.uri) map{ ymd=> try { ymd2Date( ymd); super.onRouteRequest(r) } catch { case e:Exception => // kick to "bad" action handler on invalid date Some(controllers.Application.bad(Messages("bad.date.format"))) } } getOrElse(super.onRouteRequest(r)) } ORIGINAL Let's say I want to return a BadRequest result type for all /foo URIs: override def onBadRequest(r: RequestHeader, error: String) = { BadRequest("Bad Request: " + error) } override def onRouteRequest(r: RequestHeader): Option[Handler] = { if(r.uri.startsWith("/foo") onBadRequest("go away") else super.onRouteRequest(r) } Of course does not work, since the expected return type is Option[play.api.mvc.Handler] What's the idiomatic way to deal with this, create a default Application controller method to handle filtered bad requests? Ideally, since I know in onRouteRequest that /foo is in fact a BadRequest, I'd like to call onBadRequest directly. Should note that this is a contrived example, am actually verifying a URI yyyyMMdd date param, and BadRequest-ing if it does not parse to a JodaTime instance -- basically a catch-all filter to sanitize a given date param rather than handling on every single controller method call, not to mention, avoiding cluttering up application log with useless stack traces re: invalid date parse conversions (have several MBs of these junk trace entries accruing daily due to users pointlessly manipulating the uri date in attempts to get at paid subscriber content)

    Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >