Search Results

Search found 30524 results on 1221 pages for 'display errors'.

Page 752/1221 | < Previous Page | 748 749 750 751 752 753 754 755 756 757 758 759  | Next Page >

• Launching LibreOffice Files - Unusual Window Behaviour

  - by Mike

  Ubuntu 11.10 Unity. If I launch LibreOffice Files (ODS, ODT, ODP) with a double click in their home folders they launch with the appropriate application (Calc, Writer, Impress) however the application windows do not display the usual Close, Minimize, Restore buttons in the left hand corner. There is just a blank space where they should be. In the Unity launcher on the left there is not the expected white arrow next to the launcher icon and the open app is not seen by the ALT+TAB keystroke when you have multiple windows open. For example: if you have an app open in this way and say Firefox, if you minimize Firefox you are only left with the desktop and you have no way to locate the open LibreOffice app. Clicking the app's icon in the launcher simply opens another instance. A messy workaround is to click [Firefox] to a restored window and the LibreOffice app can be seen behind it allowing a mouse click to bring it forward. If I open the LibreOffice app from the launcher and then Open a file from its menu, it all behaves as expected. I don't find this as convenient; anyone know how to fix the bad behaviour?

  Read the article

• Resolution changes when using switch

  - by Edward D

  So, the "real" resolution of my monitor is 1024x768. That's what I'd use on my docked Windows laptop, and what I'd use on my Xubuntu desktop connected directly. When I connect a switch, to switch between the two, however, the ubuntu machine's resolution changes. Everything's still proportional, and it still thinks it's doing 1024x768, but the icons and fonts appear larger. Not 800x600 larger, but still big. When I used Xubuntu Precise, I created an xorg.conf file to set a resolution of 1280x1024 which made it look the way it does without the switch ... as a workaround. When I upgraded to Trusty, I lost this. I tried to re-create it, but doesn't seem to load my file. Ideally, I'd like to correct the original problem, but I'd settle for being able to up the resolution. I searched for a while, and tried to do it, but I'm giving up ... please help me out. Controller: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04) Monitor: NEC MultiSync LCD 1850e http://www.necdisplay.com/documents/UserManuals/LCD1850E_manual.pdf OS: Xubuntu 14.04 Trusty /etc/X11/xorg.conf: # YOU CREATED THIS FILE # sudo leafpad /etc/X11/xorg.conf Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "NEC LCD1850E" # I found Synchronization Range at: # http://www.necdisplay.com/documents/UserManuals/LCD1850E_manual.pdf HorizSync 31.0-82.0 VertRefresh 55.0-85.0 EndSection Section "Screen" Identifier "Default Screen" Monitor "NEC LCD1850E" Device "Configured Video Device" SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1024x768" "800x600" "848x480" "640x480" EndSubSection EndSection

  Read the article

• Microsoft Azure News: Capturing VM Images

  - by Herve Roggero

  Originally posted on: http://geekswithblogs.net/hroggero/archive/2014/05/21/microsoft-azure-news-capturing-vm-images.aspxIf you have a Virtual Machine (VM) in Microsoft Azure that has a specific configuration, it used to be difficult to clone that VM. You had to sysprep the VM, and clone the data disks. This was slow, prone to errors, and stopped you from being productive. No more! A new option, called Capture, allows you to easily select a VM, running or not. The capture will copy the OS disk and data disks and create a new image out of it automatically for you. This means you can now easily clone an entire VM without affecting productivity.  To capture a VM, simply browse to your Virtual Machines in the Microsoft Azure management website, select the VM you want to clone, and click on the Capture button at the bottom. A window will come up asking to name your image. It took less than 1 minute for me to build a clone of my server. And because it is stored as an image, I can easily create a new VM with it. So that’s what I did… And that took about 5 minutes total.  That’s amazing…  To create a new VM from your image, click on the NEW icon (bottom left), select Compute/Virtual Machine/From Gallery, and select My Images from the left menu when selecting an Image. You will find your newly created image. Because this is a clone, you will not be prompted for a new login; the user id/password is the same. About Herve Roggero Herve Roggero, Microsoft Azure MVP, @hroggero, is the founder of Blue Syntax Consulting (http://www.bluesyntaxconsulting.com). Herve's experience includes software development, architecture, database administration and senior management with both global corporations and startup companies. Herve holds multiple certifications, including an MCDBA, MCSE, MCSD. He also holds a Master's degree in Business Administration from Indiana University. Herve is the co-author of "PRO SQL Azure" and “PRO SQL Server 2012 Practices” from Apress, a PluralSight author, and runs the Azure Florida Association.

  Read the article

• Defining a function that is both a generator and recursive [on hold]

  - by user96454

  I am new to python, so this code might not necessarily be clean, it's just for learning purposes. I had the idea of writing this function that would display the tree down the specified path. Then, i added the global variable number_of_py to count how many python files were in that tree. That worked as well. Finally, i decided to turn the whole thing into a generator, but the recursion breaks. My understanding of generators is that once next() is called python just executes the body of the function and "yields" a value until we hit the end of the body. Can someone explain why this doesn't work? Thanks. import os from sys import argv script, path = argv number_of_py = 0 lines_of_code = 0 def list_files(directory, key=''): global number_of_py files = os.listdir(directory) for f in files: real_path = os.path.join(directory, f) if os.path.isdir(real_path): list_files(real_path, key=key+' ') else: if real_path.split('.')[-1] == 'py': number_of_py += 1 with open(real_path) as g: yield len(g.read()) print key+real_path for i in list_files(argv[1]): lines_of_code += i print 'total number of lines of code: %d' % lines_of_code print 'total number of py files: %d' % number_of_py

  Read the article

• Data Model Dissonance

  - by Tony Davis

  So often at the start of the development of database applications, there is a premature rush to the keyboard. Unless, before we get there, we’ve mapped out and agreed the three data models, the Conceptual, the Logical and the Physical, then the inevitable refactoring will dog development work. It pays to get the data models sorted out up-front, however ‘agile’ you profess to be. The hardest model to get right, the most misunderstood, and the one most neglected by the various modeling tools, is the conceptual data model, and yet it is critical to all that follows. The conceptual model distils what the business understands about itself, and the way it operates. It represents the business rules that govern the required data, its constraints and its properties. The conceptual model uses the terminology of the business and defines the most important entities and their inter-relationships. Don’t assume that the organization’s understanding of these business rules is consistent or accurate. Too often, one department has a subtly different understanding of what an entity means and what it stores, from another. If our conceptual data model fails to resolve such inconsistencies, it will reduce data quality. If we don’t collect and measure the raw data in a consistent way across the whole business, how can we hope to perform meaningful aggregation? The conceptual data model has more to do with business than technology, and as such, developers often regard it as a worthy but rather arcane ceremony like saluting the flag or only eating fish on Friday. However, the consequences of getting it wrong have a direct and painful impact on many aspects of the project. If you adopt a silo-based (a.k.a. Domain driven) approach to development), you are still likely to suffer by starting with an incomplete knowledge of the domain. Even when you have surmounted these problems so that the data entities accurately reflect the business domain that the application represents, there are likely to be dire consequences from abandoning the goal of a shared, enterprise-wide understanding of the business. In reading this, you may recall experiences of the consequence of getting the conceptual data model wrong. I believe that Phil Factor, for example, witnessed the abandonment of a multi-million dollar banking project due to an inadequate conceptual analysis of how the bank defined a ‘customer’. We’d love to hear of any examples you know of development projects poleaxed by errors in the conceptual data model. Cheers, Tony

  Read the article

• Criteria for selecting timeout value?

  - by stijn

  Situation: a piece of software reads frames of data from a file in a seperate thread and puts it on a queue, emptied by another thread. That second thread periodically checks on the queue and fails rather gracefully, by showing an error message stating the read timed out, if no data is available within a certain amount of time. Initially this timeout was set to 200mSec. There was no real reasoning behind that constant though, but it worked fine. We measured on a couple of machines and for large data frames, larger than what would be used by customers, a read took like 20mSec whith no other load on the machine. However one customer now gets timeout errors now and then (on the second try all is fine, probably the file is in cache or the virus scanner leaves it alone). The programmers are like 'well, yeah, but that customer's machine is full of cruft, virus scanners, tons of unneeded background processes etc'. Of course the customer is like 'hey this should just work, shouldn't it'? While the programers have a point, since the software is heavy enough to validate the need for a dedicated machine, that does not make the customer happy. Increasing the timeout to 2 seconds, for example, solves the problem. But I'd like to make a proper decision now instead of just randomly pick some magic constant that is probably ok in 99% of cases. What criteria should be used for that? We could just pick a large number, but that feels wrong. (and then we end up with a program that has the horrible bahaviour of hanging when trying to read from a disconnected drive for instance, whereas we'd rather make it show an error right away). Or we could make the timeout value a user setting, but then we need to ducument it clearly and even then not all customers are tech savy enough to really understand what it does. Or we could try and wait until another customer reports timeouts and increase the value again. And again. Until we find something ok for 99.99% of the cases.. Any good practice for this type of situation?

  Read the article

• "This file came from another computer..." - how can I unblock all the files in a folder without having to unblock them individually?

  - by Schnapple

  Windows XP SP2 and Windows Vista have this deal where zone information is preserved in downloaded files to NTFS partitions, such that it blocks certain files in certain applications until you "unblock" the files. So for example if you download a zip file of source code to try something out, every file will display this in the security settings of the file properties "This file came from another computer and might be blocked to help protect this computer" Along with an "Unblock" button. Some programs don't care, but Visual Studio will refuse to load projects in solutions until they've been unblocked. While it's not terribly difficult to go to every project file and unblock it individually, it's a pain. And it does not appear you can unblock multiple selected files simultaneously. Is there any way to unblock all files in a directory without having to go to them all individually? I know you can turn this off globally for all new files but let's say I don't want to do that

  Read the article

• CodePlex Daily Summary for Sunday, September 09, 2012

  CodePlex Daily Summary for Sunday, September 09, 2012Popular ReleasesMishra Reader: Mishra Reader Beta 4: Additional bug fixes and logging in this release to try to find the reason some users aren't able to see the main window pop up. Also, a few UI tweaks to tighten up the feed item list. This release requires the final version of .NET 4.5. If the ClickOnce installer doesn't work for you, please try the additional setup exe.Xenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.9.0: Release Notes Imporved framework architecture Improved the framework security More import/export formats and operations New WebPortal application which includes forum, new, blog, catalog, etc. UIs Improved WebAdmin app. Reports, navigation and search Perfomance optimization Improve Xenta.Catalog domain More plugin interfaces and plugin implementations Refactoring Windows Azure support and much more... Package Guide Source Code - package contains the source code Binaries...Json.NET: Json.NET 4.5 Release 9: New feature - Added JsonValueConverter Fix - Fixed DefaultValueHandling.Ignore not igoring default values of non-nullable properties Fix - Fixed DefaultValueHandling.Populate error with non-nullable properties Fix - Fixed error when writing JSON for a JProperty with no value Fix - Fixed error when calling ToList on empty JObjects and JArrays Fix - Fixed losing decimal precision when writing decimal JValuesMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.66: Just going to bite the bullet and rip off the band-aid... SEMI-BREAKING CHANGE! Well, it's a BREAKING change to those who already adjusted their projects to use the previous breaking change's ill-conceived renamed DLLs (versions 4.61-4.65). For those who had not adapted and were still stuck in this-doesn't-work-please-fix-me mode, this is more like a fixing change. The previous breaking change just broke too many people, I'm sorry to say. Renaming the DLL from AjaxMin.dll to AjaxMinLibrary.dl...DotNetNuke® Community Edition CMS: 07.00.00 CTP (Not for Production Use): NOTE: New Minimum Requirementshttp://www.dotnetnuke.com/Portals/25/Blog/Files/1/3418/Windows-Live-Writer-1426fd8a58ef_902C-MinimumVersionSupport_2.png Simplified InstallerThe first thing you will notice is that the installer has been updated. Not only have we updated the look and feel, but we also simplified the overall install process. You shouldn’t have to click through a series of screens in order to just get your website running. With the 7.0 installer we have taken an approach that a...BIDS Helper: BIDS Helper 1.6.1: In addition to fixing a number of bugs that beta testers reported, this release includes the following new features for Tabular models in SQL 2012: New Features: Tabular Display Folders Tabular Translations Editor Tabular Sync Descriptions Fixed Issues: Biml issues 32849 fixing bug in Tabular Actions Editor Form where you type in an invalid action name which is a reserved word like CON or which is a duplicate name to another action 32695 - fixing bug in SSAS Sync Descriptions whe...Umbraco CMS: Umbraco 4.9.0: Whats newThe media section has been overhauled to support HTML5 uploads, just drag and drop files in, even multiple files are supported on any HTML5 capable browser. The folder content overview is also much improved allowing you to filter it and perform common actions on your media items. The Rich Text Editor’s “Media” button now uses an embedder based on the open oEmbed standard (if you’re upgrading, enable the media button in the Rich Text Editor datatype settings and set TidyEditorConten...menu4web: menu4web 0.4.1 - javascript menu for web sites: This release is for those who believe that global variables are evil. menu4web has been wrapped into m4w singleton object. Added "Vertical Tabs" example which illustrates object notation.Microsoft SQL Server Product Samples: Database: AdventureWorks OData Feed: The AdventureWorks OData service exposes resources based on specific SQL views. The SQL views are a limited subset of the AdventureWorks database that results in several consuming scenarios: CompanySales Documents ManufacturingInstructions ProductCatalog TerritorySalesDrilldown WorkOrderRouting How to install the sample You can consume the AdventureWorks OData feed from http://services.odata.org/AdventureWorksV3/AdventureWorks.svc. You can also consume the AdventureWorks OData fe...Desktop Google Reader: 1.4.6: Sorting feeds alphabetical is now optional (see preferences window)Lightweight Fluent Workflow: objectflow 1.4.0.1: Changes in this release;Exception handling policies Install on NuGet console; Install-Package objectflow.core -pre Supported work-flow patterns Exception policies Sequence Parallel split Simple merge Exclusive choice Retry Arbitrary cycles Framework Features Handle exceptions with workflow.Configure().On<Exception>() Repeat operations and functions an arbitrary number of times Retry failed lamda functions Generic interface for concise workflow registration Operations t...Droid Explorer: Droid Explorer 0.8.8.7 Beta: Bug in the display icon for apk's, will fix with next release Added fallback icon if unable to get the image/icon from the Cloud Service Removed some stale plugins that were either out dated or incomplete. Added handler for *.ab files for restoring backups Added plugin to create device backups Backups stored in %USERPROFILE%\Android Backups\%DEVICE_ID%\ Added custom folder icon for the android backups directory better error handling for installing an apk bug fixes for the Runn...LibXmlSocket: Binary: .net4.5,.netCore???????Hidden Capture (HC): Hidden Capture 1.1: Hidden Capture 1.1 by Mohsen E.Dawatgar http://Hidden-Capture.blogfa.comThe Visual Guide for Building Team Foundation Server 2012 Environments: Version 1: --Nearforums - ASP.NET MVC forum engine: Nearforums v8.5: Version 8.5 of Nearforums, the ASP.NET MVC Forum Engine. New features include: Built-in search engine using Lucene.NET Flood control improvements Notifications improvements: sync option and mail body View Roadmap for more details webdeploy package sha1 checksum: 961aff884a9187b6e8a86d68913cdd31f8deaf83WiX Toolset: WiX Toolset v3.6: WiX Toolset v3.6 introduces the Burn bootstrapper/chaining engine and support for Visual Studio 2012 and .NET Framework 4.5. Other minor functionality includes: WixDependencyExtension supports dependency checking among MSI packages. WixFirewallExtension supports more features of Windows Firewall. WixTagExtension supports Software Id Tagging. WixUtilExtension now supports recursive directory deletion. Melt simplifies pure-WiX patching by extracting .msi package content and updating .w...Iveely Search Engine: Iveely Search Engine （0.2.0）: ????ISE?0.1.0??，?????，ISE?0.2.0?????????，???????，????????20???follow?ISE，????，??ISE??????????，??????????，?????????，?????????0.2.0??????，??????????。 Iveely Search Engine ?0.2.0?????????“??????????”，??????，?????????，???????，???????????????????，????、????????????。???0.1.0????????????： 1. ??“????” ??。??????????，?????????，???????????????????。??：????????，????????????，??????????????????。??????。 2. ??“????”??。?0.1.0??????，???????，???????????????，?????????????，????????，?0.2.0?，???????...GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.New ProjectsAjax based Multi Forms ASP.NET Framework (Amfan): Ajax based Multi Forms ASP.NET Framework (Amfan) reduces the limitations of the Asp.Net by creating multiple sub-forms of the page as separate aspx pages.APO-CS: A straight port of Apophysis to C#.BaceCP / ???? ????? ?? ???????? ????: BaceCP e ??????????? ???????? ?? ????????, ??????????? ? ????????? ?? ???? ????? ?? ???????? ????.CafeAdm Messenger: CafeAdm Messenger Allows a server connection for CafeAdm Schedule and MessengerDECnet 2.0 Router: A user mode DECnet 2.0 router that will interoperate with the HECnet bridge.DriveManager: This is a common utility to provide an interface for all cloud based drive providers like google drive, dropbox, MS Sky Drive. Email Tester: This utility will help you check your SMTP settings for SharePoint. It is best for Pre-PROD and PROD environment where you can't modify code.EvoGame: The evo game that im working onforebittims: Project Owner : ForeBitt Inc. Sri Lanka Project Manager : Chackrapani Wickramarathne Technologies : VS 2010, C#, Linq to Sql, Sql server 2008 R2, Dev ExpressMCServe: MCServe is the minecraft-server which takes advantage of the performance of the .NET FrameworkMental: Ðang trong quá trình phát tri?nSalaryManagementSys: SalaryManagementSysVKplay: This application is audio player, launches on windows phone platform and uses music from vk.com social network.

  Read the article

• What are working xorg.conf settings for using a Matrox TripleHead2Go @ 5040x1050?

  - by Brendan Abel

  I'm trying to configure xorg.conf to correctly set the resolution of my screens. I'm using a matrox triplehead, so the monitor is a single 5040x1050 screen. Unfortunately, it's being incorrectly set to 3840x1024. Here is my xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Matrox" HorizSync 31.5 - 80.0 VertRefresh 57.0 - 75.0 #Option "DPMS" Modeline "5040x1050@60" 451.27 5040 5072 6784 6816 1050 1071 1081 1103 #Modeline "5040x1050@59" 441.28 5040 5072 6744 6776 1050 1071 1081 1103 #Modeline "5040x1050@57" 421.62 5040 5072 6672 6704 1050 1071 1081 1103 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GTX+" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "5040x1050" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Completely clean previous Radeon drivers on Windows 7 64bit

  - by tomo

  Recently I replaced my old Radeon HD 2600XT to Radeon HD 6770 from MSI. I had strange problem that after installing the newest Radeon drivers they exist only until first reboot. After reboot my new card is recognized as an old 2600. I tried to unintall ATI/AMD software completetely from Programs/Features, then reboot, then untinstall driver from device manager, then reboot, then system showed that display driver is regular VGA (and oldschool 640x480 resolutions). Then to be double sure I executed DriverCleaner3 and Driver sweeper. After the restart I installed the newest drivers from amd site but after restarting the system recognizes card as 2600. I'm completely lost. Perhaps Win7 64bit caches somewhere drivers? Are there any issues regarding drivers-shadowing or 32/64 mirroring? Reinstalling the system is not an option.

  Read the article

• System time wrong after running ntpdate because DST ignored

  - by Ian Dunn

  When I run ntpdate, my system clock displays the time as an hour behind what it should be. I know that ntpdate does everything in UTC, so I'm guessing there's a timezone setting wrong and it's ignoring Daylight Savings Time, but I can't figure it out. Here's what I've done so far: ln -sf /usr/share/zoneinfo/EST /etc/localtime to set the timezone Set UTC=true in /etc/sysconfig/clock so that DST will be automatically applied date -s hh:mm::ss to set system clock correctly hwclock -systohc --utc to set the hardware clock correctly At this point date and hwclock both display the correct time. But if I then run ntpdate 0.us.pool.ntp.org, the date output is an hour behind what it should be. I've looked at a dozen tutorials and can't figure out what I'm doing wrong. Does anyone have any ideas?

  Read the article

• Changing Windows 'hosts' file in guest OS under Parallels Desktop 6 on Mac

  - by ling

  I am running Win7 in a Parallels Desktop 6 on Mac. On the mac, I use /etc/hosts : 127.0.0.1 mysite and it works fine : I can type mysite in the url and the website will display. What I want to do is be able to reproduce the same on Win7 with IE8 for example. Another guy did it successfully here but I can't : Parallels: How to see a Mac-hosted website from Windows? On Mac : ifconfig -a vnic0 10.211.55.2 on Win7 I tried this C:\Windows\System32\drivers\etc\hosts 10.211.55.2 mysite What am I missing ?

  Read the article

• More on Map Testing

  - by Michael Stephenson

  I have been chatting with Maurice den Heijer recently about his codeplex project for the BizTalk Map Testing Framework (http://mtf.codeplex.com/). Some of you may remember the article I did for BizTalk 2009 and 2006 about how to test maps but with Maurice's project he is effectively looking at how to improve productivity and quality by building some useful testing features within the framework to simplify the process of testing maps. As part of our discussion we realized that we both had slightly different approaches to how we validate the output from the map. Put simple Maurice does some xpath validation of the data in various nodes where as my approach for most standard cases is to use serialization to allow you to validate the output using normal MSTest assertions. I'm not really going to go into the pro's and con's of each approach because I think there is a place for both and also I'm sure others have various approaches which work too. What would be great is for the map testing framework to provide support for different ways of testing which can cover everything from simple cases to some very specialized scenarios. So as agreed with Maurice I have done the sample which I will talk about in the rest of this article to show how we can use the serialization approach to create and compare the input and output from a map in normal development testing. Prerequisites One of the common patterns I usually implement when developing BizTalk solutions is to use xsd.exe to create .net classes for most of the schemas used within the solution. In the testing pattern I will take advantage of these .net classes. The Map In this sample the map we will use is very simple and just concatenates some data from the input message to the output message. Hopefully the below picture illustrates this well. The Test In the test I'm basically taking the following actions: Use the .net class generated from the schema to create an input message for the map Serialize the input object to a file Run the map from .net using the standard BizTalk test method which was generated for running the map Deserialize the output file from the map execution to a .net class representing the output schema Use MsTest assertions to validate things about the output message The below picture shows this: As you can see the code for this is pretty simple and it's all strongly typed which means changes to my schema which can affect the tests can be easily picked up as compilation errors. I can then chose to have one test which validates most of the output from the map, or to have many specific tests covering individual scenarios within the map. Summary Hopefully this post illustrates a powerful yet simple way of effectively testing many BizTalk mapping scenarios. I will probably have more conversations with Maurice about these approaches and perhaps some of the above will be included in the mapping test framework.   The sample can be downloaded from here: http://cid-983a58358c675769.office.live.com/self.aspx/Blog%20Samples/More%20Map%20Testing/MapTestSample.zip

  Read the article

• Antenna Aligner part 2: Finding the right direction

  - by Chris George

  Last time I managed to get "my first app(tm)" built, published and running on my iPhone. This was really cool, a piece of my code running on my very own device. Ok, so I'm easily pleased! The next challenge was actually trying to determine what it was I wanted this app to do, and how to do it. Reverting back to good old paper and pen, I started sketching out designs for the app. I knew I wanted it to get a list of transmitters, then clicking on a transmitter would display a compass type view, with an arrow pointing the right way. I figured there would not be much point in continuing until I know I could do the graphical part of the project, i.e. the rotating compass, so armed with that reasoning (plus the fact I just wanted to get on and code!), I once again dived into visual studio. Using my friend (google) I found some example code for getting the compass data from the phone using the PhoneGap framework. // onSuccess: Get the current heading // function onSuccess(heading) {    alert('Heading: ' + heading); } navigator.compass.getCurrentHeading(onSuccess, onError); Using the ripple mobile emulator this showed that it was successfully getting the compass heading. But it didn't work when uploaded to my phone. It turns out that the examples I had been looking at were for PhoneGap 1.0, and Nomad uses PhoneGap 1.4.1. In 1.4.1, getCurrentHeading provides a compass object to onSuccess, not just a numeric value, so the code now looks like // onSuccess: Get the current magnetic heading // function onSuccess(heading) {    alert('Heading: ' + heading.magneticHeading); }; navigator.compass.getCurrentHeading(onSuccess, onError); So the lesson learnt from this... read the documentation for the version you are actually using! This does, however, lead to compatibility problems with ripple as it only supports 1.0 which is a real pain. I hope that the ripple system is updated sometime soon.

  Read the article

• How can I get my ATI / AMD drivers to work with any kernel above 3.2.0.x?

  - by TorakTu

  How can I get my ATI / AMD drivers to work with any kernel above 3.2.0.x ? WHAT DID WORK Installed original AMD64 version of Ubuntu 12.04 ISO image. Burned DVD and installed which shown kernel 3.2.0-23 to begin with. Got 5.1 surround sound working. Got ATI ( Now its AMD ) video drivers installed for my Radeon HD R6870 Video card from AMD's website. fglrxinfo came up and reported as normal. THE PROBLEM Kernel 3.2.0.x kept locking up so I tried higher kernel versions. But ATI / AMD Drivers do not install on any kernel Above 3.2.0.x WHAT I HAVE TRIED I have gone over this tutorial many times ( https://help.ubuntu.com/community/BinaryDriverHowto/ATI ) and it doesn't work on ANY kernel except 3.2.0.x. The problems I am having here are that the ATI / AMD drivers working for the 12.04 Precise with kernel 3.2.0-23 and 24, But the computer kept locking up. Although all my games would work, the lock ups were random and were constant. So I looked all over the web for 3 days trying to find an answer and the lock up issue was said to just update the kernel. So I did. Have tried many kernels. All of them .. no lock ups. BUT the Restricted AMD drivers from the AMD website will not install. And none of the OpenSource AMD drivers have EVER installed no matter what Kernel or version I tried. EXAMPLE OUTPUT OF 3D TYPE OF ERRORS Javax.media.opengl.GLException: glXGetConfig failed: error code GLX_NO_EXTENSION at com.sun.opengl.impl.x11.X11GLDrawableFactory.glXGetConfig(X11GLDrawableFactory.java:651) at com.sun.opengl.impl.x11.X11GLDrawableFactory.xvi2GLCapabilities(X11GLDrawableFactory.java:350) at com.sun.opengl.impl.x11.X11GLDrawableFactory.chooseGraphicsConfiguration(X11GLDrawableFactory.java:174) at javax.media.opengl.GLCanvas.chooseGraphicsConfiguration(GLCanvas.java:520) at javax.media.opengl.GLCanvas.<init>(GLCanvas.java:131) at haven.HavenPanel.<init>(HavenPanel.java:68) at haven.HavenPanel.<init>(HavenPanel.java:78) at haven.MainFrame.<init>(MainFrame.java:182) at haven.MainFrame.main2(MainFrame.java:306) at haven.MainFrame.access$100(MainFrame.java:34) at haven.MainFrame$7.run(MainFrame.java:360) at java.lang.Thread.run(Thread.java:722) And of course this is what fglrxinfo shows : X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 139 (ATIFGLEXTENSION) Minor opcode of failed request: 66 () Serial number of failed request: 13 Current serial number in output stream: 13 EDIT : I forgot to mention that I DID look at this post over the last few days and it did not help.

  Read the article

• Best Architecture for ASP.NET WebForms Application

  - by stack man

  I have written an ASP.NET WebForms portal for a client. The project has kind of evolved rather than being properly planned and structured from the beginning. Consequently, all the code is mashed together within the same project and without any layers. The client is now happy with the functionality, so I would like to refactor the code such that I will be confident about releasing the project. As there seems to be many differing ways to design the architecture, I would like some opinions about the best approach to take. FUNCTIONALITY The portal allows administrators to configure HTML templates. Other associated "partners" will be able to display these templates by adding IFrame code to their site. Within these templates, customers can register and purchase products. An API has been implemented using WCF allowing external companies to interface with the system also. An Admin section allows Administrators to configure various functionality and view reports for each partner. The system sends out invoices and email notifications to customers. CURRENT ARCHITECTURE It is currently using EF4 to read/write to the database. The EF objects are used directly within the aspx files. This has facilitated rapid development while I have been writing the site but it is probably unacceptable to keep it like that as it is tightly coupling the db with the UI. Specific business logic has been added to partial classes of the EF objects. QUESTIONS The goal of refactoring will be to make the site scalable, easily maintainable and secure. 1) What kind of architecture would be best for this? Please describe what should be in each layer, whether I should use DTO's / POCO / Active Record pattern etc. 2) Is there a robust way to auto-generate DTO's / BOs so that any future enhancements will be simple to implement despite the extra layers? 3) Would it be beneficial to convert the project from WebForms to MVC?

  Read the article

• How do I get my programs to communicate with each other

  - by Benjamin Lindqvist

  I'm basically just getting started with programming. The problem I have with progressing is that I have a hard time learning stuff just for the sake of knowing them - I do better when there's a problem to be solved or a task to be completed so I can learn 'on the job'. So I'm interested in starting some interesting project. I know the basics of Python, Java, Matlab and some C++ aswell and I know enough about microcontrollers to make LED blink etc. The type of stuff I'm looking for is for example scraping some weather forecast site (with Python) and outputting the chance of rain to a LCD display, or a program that makes chrome open and log in to facebook if I say "HAL, time for facebook", or more generally, a program that reads serial/USB input, looks for certain sequences and sends instructions to some other program if it finds one. Do you open some kind of shared stream in which one program reads and one writes? What do I need to read up on to do accomplish this myself? I have no experience with linux or the linux terminal, but looking over peoples shoulders makes me suspect that's what people use. Is that correct?

  Read the article

• Best scripting language for project [on hold]

  - by Dave

  This is a subjective question, but I don't know where else to ask it. I'd appreciate it if someone could direct me to an appropriate scripting language for my project. I'm a little new at this so I'd appreciate any help. The project is a website that will display a list of photo subject groups (such as "nature" "people" "sports" etc) on the home page. The photos will all be in subdirectories of the main photo directory (photos) and each subject group will represent a subdirectory in photos. For example in directory photos there might be 3 subdirectories, "nature" "people" "sports" and in each of those subdirectories there will be the actual photos. The idea is that when the website owner wants to update/add/delete a subject group all he has to do is add, delete or update a subdirectory of the photos directory. This means, I think, that I need a scripting language that can read the directories and files in the website and then send a web page with the information in it. What is the simplest and easiest scripting language to do this in? Any ideas? Thanks

  Read the article

• Ubuntu 12.04.1 LTS and Nvidia dirver (304.51) 64bit: problem 640x480

  - by nibianaswen

  I have a problem with this configuration: Asus K55V, Ubuntu 12.04 LTS and Nvidia driver 304.51. I have remove the nouveau driver with: apt-get --purge remove xserver-xorg-video-nouveau I installed the official nvidia driver (from www.nvidia.com) but when I reboot the PC the resolution of screen is only 640x480 and the monitor is resized. Mo solution at this problem if i change the xorg.conf. Now i have uninstall the nvidia driver and reinstall with sudo apt-get purge nvidia-current sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current When I reboot the screen resolution and size is OK, but if I start nvidia-setting I received the message: You do not appear to be using the NVIDIA X driver. and with command: sudo lshw -c display | grep driver I received configuration: driver=i915 latency=0 This sound like the system is using the Intel card. When I launch command lspci | grep VGA the output is: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1058 (rev ff) And there is no /etc/X11/xorg.conf. I have read a lot of guides on internet but without success.. How i can use nvidia card with the driver that i have installed?

  Read the article

• Working with documents and SharePoint - Best practices

  - by KunaalKapoor

  Follow these simple guidelines to make collaboration using SharePoint easier:1. File Name:While it is allowed to use spaces in your filename (and maybe it seems even logical to do so), don’t use them if your file will end up (or is born on) SharePoint. When you use the “download a copy” functionality, SharePoint will replace the spaces with an “_”. This might (will) result in inconsistency when you upload the “same” file again, since SharePoint will see this as a different file (since the filename is different). I recommend using a filename with Capitalization style naming guideline. For instance: the document “Overall governance model.docx” would be named “OverallGovernanceModel.docx”Use the TITLE field in the office applications to give your document a title (and subtitle and keywords, .) The title column can be used in a view in a library. You can get to the document properties by clicking on 'Office Button/Prepare/Properties'. (Office 2007). This is metadata that is stored with the document, and will remain in the document (even if you exchange this document via e-mail, via an external hard drive). The filename cannot be longer than 128 characters. (and that is IMHO far beyond reasonable) You cannot use any of these characters: ” # % & * : < > ? \ / { | } ~ 2. Versioning:SharePoint has a built-in versioning system. You can work with major (published) versions, and minor (draft) versions. Of each of these two document types, you can store a numbers of versions that are kept. Watch out, each version is saved, not only the delta between 2 versions, and this counts to your Site Collection Quota. (Example: you have a Word document with a size of 2 MB. When you keep 5 Drafts this will result in storing (and consuming) 10 MB.So, don’t call your document “NewUserAccountProcessDRAFTv1.docx”, but “NewUserAccountProcess.docx” and use versioning setting in your library.You can enable views on your library to display the version number.You can enable the version number to be displayed in a Word document.3. Use MetadataUse metadata to assign other properties to documents, so it can be easily identified, sorted- or grouped by.

  Read the article

• Accessing localhost via IIS 7.5 on Windows 7 very slow

  - by Ian Devlin

  (I've asked this over on stackoverflow already, but thought I'd ask here as well) I'm currently running an ASP.NET application on IIS 7.5 on Windows 7. When I access this application on Internet Explorer (either 6, 7 or 8) it is incredible slow and often fails to load at all. There are messages at the bottom saying: Waiting for http://localhost/....... or sometimes waiting for about:blank (I've read that this can be a virus, but I've run all the usual checks and it's not). constantly, but it returns with the usual: "Internet Explorer cannot display the webpage" I've also tried this by using 127.0.0.1 and the machine name, with the same results. I've tried the same application on the latest Firefox, Safari, Chrome and Opera and they all work fine. I've also installed the same application on a Windows Server 2003 machine, and it all works fine via Internet Explorer. I've also turned off the IPv6 setting on the LAN connection. Soes anyone have any ideas why this doesn't work with Internet Explorer and yet does with other browsers?

  Read the article

• Mac OS X app window is too large - how can I resize?

  - by Kyle Cronin

  I'm a MacBook user, and when I'm home I plug into a large external monitor to get additional screen space. When I'm on the go I disconnect and use my laptop's built-in display. For the most part this arrangement works very well; however, I occasionally run into an issue where I'll resize an app on the external, causing it to be too large to fit on the built-in screen when I disconnect. Most apps don't have a problem decreasing their height automatically or resizing to fit when I click the green orb, but some (like iTunes) don't want to cooperate. How can I resize apps like iTunes without reconnecting to my external? Here's a screenshot:

  Read the article

• How do I log file system read/writes by filename in Linux?

  - by Casey

  I'm looking for a simple method that will log file system operations. It should display the name of the file being accessed or modified. I'm familiar with powertop, and it appears this works to an extent, in so much that it show the user files that were written to. Is there any other utilities that support this feature. Some of my findings: powertop: best for write access logging, but more focused on CPU activity iotop: shows real time disk access by process, but not file name lsof: shows the open files per process, but not real time file access iostat: shows the real time I/O performance of disk/arrays but does not indicate file or process

  Read the article

• Turning a problem into a data

  - by Fogmeister

  OK, I have an app that I'm creating but I'm just really not sure about how to approach the problem. The idea is fairly simple. I'm just not sure how to wrap it in a data model (or even if I should). TBH I feel like I'm making it more complicated than it needs to be. How it works. The app will have circles along the top in a row that need to be connected to circles along the bottom in a row. 10 circles at the top. 10 at the bottom. One connection per pair of dots. Anyway, I can get the dots to connect I'm just not sure how to wrap it in a data model so that I can analyse what has been connected and see if it is right or not. The circles will be questions and answers. I can make an array of question objects with a question and answer properties. I can then display these as the dot pairs. I'm just not sure how to record which questions have been connected to which answers. It is valid for a user to connect a wrong answer as they all get checked at the end. I was thinking of using SpriteKit but this isn't a restriction. I could use UIKit or something else. TBH, this question is fairly language free as I'm just after a way of modelling it.

  Read the article

• The Internet Key Wave MW833UP is not recognized in Ubuntu

  - by gio900

  I can't use my Onda MW833UP... :( Any advice? Here is something that someone else may understand: ~$: lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric ~$: lsusb Bus 001 Device 005: ID 1ee8:0012 ~$: dmesg [ 22.709475] cdc_acm 1-1:1.0: ttyACM0: USB ACM device [ 22.714856] usbcore: registered new interface driver cdc_acm [ 22.714866] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 23.520490] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 24.244530] usbcore: registered new interface driver usbserial [ 24.244575] USB Serial support registered for generic [ 24.244673] usbcore: registered new interface driver usbserial_generic [ 24.244681] usbserial: USB Serial Driver core [ 24.265879] USB Serial support registered for GSM modem (1-port) [ 24.285680] usbcore: registered new interface driver option [ 24.285691] option: v0.7.2:USB Driver for GSM modems [ 24.425878] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,commit=600 [ 24.736540] EXT4-fs (sda8): re-mounted. Opts: commit=600 [ 35.705796] Easy slow down manager: checking for SABI support. [ 35.706002] Easy slow down manager: SABI is supported (f5189) [ 36.060099] usbcore: deregistering interface driver uvcvideo [ 139.508061] CE: hpet increased min_delta_ns to 20113 nsec [ 6798.378917] usb 1-1: USB disconnect, device number 5 [ 6809.108232] usb 1-1: new high speed USB device number 6 using ehci_hcd [ 6809.242692] scsi5 : usb-storage 1-1:1.0 [ 6810.241257] scsi 5:0:0:0: CD-ROM Onda Datacard CD-ROM 0001 PQ: 0 ANSI: 0 [ 6810.241841] scsi 5:0:0:1: Direct-Access Onda Storage 0001 PQ: 0 ANSI: 0 [ 6810.271410] sr0: scsi3-mmc drive: 0x/0x caddy [ 6810.272099] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 6810.272852] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 6810.279954] sd 5:0:0:1: [sdb] Attached SCSI removable disk [ 6810.281210] sd 5:0:0:1: Attached scsi generic sg2 type 0 [ 6810.380591] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 6810.380617] sr: Sense Key : Hardware Error [current] [ 6810.380625] sr: Add. Sense: No additional sense information [ 6810.613937] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 6810.613972] sr: Sense Key : Hardware Error [current] [ 6810.613984] sr: Add. Sense: No additional sense information [ 6810.673716] usb 1-1: USB disconnect, device number 6 [ 6815.572142] usb 1-1: new high speed USB device number 7 using ehci_hcd [ 6815.706828] cdc_acm 1-1:1.0: ttyACM0: USB ACM device The last 3 lines are where I inserted the Internet key, then reconnected it. usb-device T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1ee8 ProdID=0012 Rev=00.01 S: Manufacturer=Onda S: Product=MW833UP S: SerialNumber=9230B35D870F9CB7AE684EACC5C12BE5EC33B26E C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=01 Driver=cdc_acm I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm Then there is /dev/ttyACM0. When the key is connected to the USB port, everything that will meant...

  Read the article

< Previous Page | 748 749 750 751 752 753 754 755 756 757 758 759  | Next Page >