Search Results

Search found 41561 results on 1663 pages for 'linux command'.

Page 754/1663 | < Previous Page | 750 751 752 753 754 755 756 757 758 759 760 761  | Next Page >

• hp pavilion g6 1250 with a BCM 4313 doesn't see any wireless networks

  - by Ahmed Kotb

  i have tried using ubuntu 10.04 and ubuntu 11.10 and both have the same problem the driver is detected by the additional propriety drivers wizard and after installation, ubuntu can't see except on wireless network which is not mine (and i can't connect to it as it is secured) There are plenty of wireless networks around me but ubuntu can't detect them and if i tried to connect to one of them as if it was hidden connection time out. the command lspci -nvn | grep -i net gives 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) iwconfig gives lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off i guess it is something related to Broadcom driver .. but i don't know , any help will be appreciated UPDATE: ok i installed a new copy of 11.10 to remove the effect of any trials i have made i followed the link (http://askubuntu.com/q/67806) as suggested all what i have done now is trying the command lsmod | grep brc and it gave me the following brcmsmac 631693 0 brcmutil 17837 1 brcmsmac mac80211 310872 1 brcmsmac cfg80211 199587 2 brcmsmac,mac80211 crc_ccitt 12667 1 brcmsmac then i blacklisted all the other drivers as mentioned in the link the wireless is still disabled.. in the last installation installing the Brodcom STA driver form the additional drivers enabled the menu but as i have said before it wasn't able to connect or even get a list of available networks so what should i do now ? the output of command rfkill list all rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Oracle on NFS vmdk beats native NFS!?

  - by fletch00

  Hi, my colleagues are pursuing this with Netapp and Oracle - but I thought I'd post here on the off chance someone else has seen this We have a RedHat 5 VM (fully up2date) running Oracle 11i with data disks mounted via the VM's linux kernel NFS using Oracle's recommended mount options and the performance is very inconsistent (Querys that should take < 2 seconds sometimes take 60 seconds) Funny thing is we can run the same queries perfectly consistently < 2 seconds on a VMDK residing on SAME NetApp NFS datastore! Makes me wish Oracle and NetApp collaborated as closely as VMware and NetApp did on the Virtual Storage Console we used to perfectly set the NFS options and keep them in compliance... We have tried a few Linux NFS options others have posted and not seen improvement so far. We are now creating VMDK's for the VM to replace the Linux NFS mounted and workaround the issue as our developers need consistent performance ASAP.

  Read the article

• The Eight Most-Important EBS Techstack Stories in 2010

  - by Steven Chan

  I've never really understood the custom of stuffing a summary of one's family's activities for the year in a Christmas/Hanukkah/Kwanzaa card.  It seems a little self-congratulatory and impersonal.  I'd rather my friends kept authentically in touch throughout the year, but perhaps that's just me.Nonetheless, I see the value of a year-end summary in the IT industry.  I spend a lot of time helping our customers understand the latest new developments... and straightening out confusion over changes to the old and familiar.  It can be hard to keep up with the latest news in this space.Here are the eight most-important news items for 2010, with suggested actions for Apps DBAs:Premier Support for EBS 11.5.10 ended on November 30, 2010You need to be on a minimum baseline of 11.5.10 patches to be eligible for Extended Support.  New patches for EBS 11i released during the Extended Support period will be produced only for the minimum baseline configuration.Action: Ensure that your EBS 11i environments meet the minimum baseline requirements. Minimum Baselines are Emerging for EBS 12.0 Extended SupportExtended Support for EBS 12.0 begins on February 1, 2012.  That's only 13 months away.  Minimum baselines haven't been finalized yet, but the 12.0.6 Release Update Pack and the Financials CPC July 2009 are currently slated.  Action: Ensure that your EBS 12.0 environments meet the currently-specified baseline requirements. Sun, Windows, and Linux users should have upgraded to JDK 6 by nowJDK 5's End of Service Life was October 30, 2009 for those three platforms.  If you're running the E-Business Suite on Sun, Windows, or Linux, you should upgrade your EBS servers to JDK 6.  Alternatively, you can purchase Java for Business support (the equivalent of Extended Support for Java). Action: Upgrade your Sun, Windows, or Linux EBS servers to JDK 6. Premier Support for Database 10gR2 ended on July 31, 2010The 10gR2 Database is now in Extended Support.  If you're still on 10gR2, you should start planning your upgrade to a higher certified database version such as 11gR2 11.2.0.2.Action: Upgrade to 10gR2 databases to 11gR2 11.2.0.2. 

  Read the article

• Windows Azure Virtual Machine Test Drive Kit

  - by Clint Edmonson

  The public preview of hosted Virtual Machines in Windows Azure is now available to the general public. This platform preview enables you to evaluate our new IaaS and Enterprise Networking capabilities. Once you have registered for the 90 Day Free Trial and created a new account, you can access the preview directly at this link: https://account.windowsazure.com/PreviewFeatures If you’ve been to any of my presentations lately, you’ll know that I’m fired up about these new offerings. As I’ve worked through some scenarios for myself and with my customers, I’ve been collecting the resources that helped me to ramp up. Here’s a collection of links to the items I’ve found most useful: Core Resources Digital Chalk Talk Videos – detailed technical overviews of the new Windows Azure services and supporting technologies as announced June 7, including Virtual Machines (IaaS Windows and Linux), Storage, Command Line Tools http://www.meetwindowsazure.com/DigitalChalkTalks Scenarios Videos on You Tube – “how to” guides, including “Create and Manage Virtual Networks”, “Create & Manage SQL Database”, and many more http://www.youtube.com/user/windowsazure Windows Azure Trust Center - provides a comprehensive of view of Windows Azure and security and compliance practices http://www.windowsazure.com/en-us/support/trust-center/ MSDN Forums for Windows Azure http://www.windowsazure.com/en-us/support/preview-support/ Microsoft Knowledge Base article Microsoft server software support for Windows Azure Virtual Machines Videos Deep Dive into Running Virtual Machines on Windows Azure Windows Azure Virtual Machines and Virtual Networks Windows Azure IaaS and How It Works Deep Dive into Windows Azure Virtual Machines: From the Cloud Vendor and Enterprise Perspective An Overview of Managing Applications, Services, and Virtual Machines in Windows Azure Monitoring and Managing Your Windows Azure Applications and Services Overview of Windows Azure Networking Features Hybrid Will Rule: Options to Connect, Extend and Integrate Applications in Your Data Center and Windows Azure Business Continuity in the Windows Azure Cloud Linux on Windows Azure Blogs Understanding Windows Azure Virtual Machines An Overview of Windows Azure Virtual Network Virtual Machines and Windows Running SQL Server in a Windows Azure Virtual Machine Support for Linux Virtual Machines on Windows Azure

  Read the article

• Win Server 2008 force kerberos setting

  - by ftiaronsem

  I am currently facing the problem that a linux machine running Ubuntu 10.04 LTS with samba and winbindd installed is unable to join a Domain, that is managed by a Windows 2008 DC. The linux config, is probably alright, since I have successfully used it at multiple sites, running 2008 as well as 2003 DCs. The error I get ("libads/kerberos.c: Join to domain is not valid. Client credentials have been revoked"), indicates that there is a kerberos problem. Normally the linux box is supposed to authenticate via NTLM and is configured that way. The only reason I can image why it tries kerberos is that the DC is forcing it. Do you know whether there is any setting in the security policies of a window 2008 server, that would completely block NTLM, forcing kerberos? If so, where can I find this setting?

  Read the article

• rvmsudo foreman export upstart without asking for password

  - by Millisami

  My capistrano deploy.rb has a foreman export command for a rails app on Ubuntu 10.04 So, while deploying, I want to export the foreman to upstart script. But doing that, the command rvmsudo foreman export ... asks for root password and I cannot do anything. Googled a lot and tried with various tweaks but nothing worked. * executing `foreman:export' * executing "cd /home/deploy/zappy/releases/20111019175422 && rvmsudo foreman export upstart /etc/init -a zappy -u deploy -f ./Procfile.production -c worker=1 redis=1 -l /home/deploy/zappy/releases/20111019175422/log/foreman" servers: ["173.255.205.237"] [173.255.205.237] executing command ** [out :: 173.255.205.237] [sudo] password for deploy: What could be the solution to do it password-less way?

  Read the article

• NTP service, offset increasing after sync

  - by Ajay

  I have installed Ubuntu 12.10 version on my PC. I am running NTP service having NTP server as GPS. I found that when we start NTP service by ntp start command, PC is able to sync with GPS as i get '*' symbol before GPS IP when i run ntpq -p command. This remains good for some time and then the * symbol is removed which means that PC is not synchronized to that server. Now, by running command ntpq -p it shows that all parameter are OK but as '*' is removed, slowly offset goes on increasing. remote refid st t when poll reach delay offset jitter ============================================================================== *192.168.100.33 .GPS. 1 u 7 16 1 2.333 23.799 0.808 remote refid st t when poll reach delay offset jitter ============================================================================== *192.168.100.33 .GPS. 1 u 14 16 3 2.333 23.799 0.879 remote refid st t when poll reach delay offset jitter ============================================================================== *192.168.100.33 .GPS. 1 u 11 16 7 2.333 23.799 1.500 remote refid st t when poll reach delay offset jitter ============================================================================== *192.168.100.33 .GPS. 1 u 8 16 17 2.333 23.799 2.177 below are the last 4 ntp status when sync is lost with GPS ============================================================================== 192.168.100.33 .GPS. 1 u 1 16 377 2.404 1169.94 1.735 remote refid st t when poll reach delay offset jitter ============================================================================== 192.168.100.33 .GPS. 1 u - 16 377 2.513 1171.80 0.898 remote refid st t when poll reach delay offset jitter ============================================================================== 192.168.100.33 .GPS. 1 u 15 16 377 2.513 1171.80 0.898 Since, GPS is already available, PC never re-synchronize itself to GPS later ON. I have to restart the ntp service and then PC synchronizes to GPS and '*' symbol arrives.

  Read the article

• It's Not TV- It's OTN: Top 10 Videos on the OTN YouTube Channel

  - by Bob Rhubart

  It's been a while since we checked in on what people are watching on the Oracle Technology Network YouTube Channel. Here are the Top 10 video for the last 30 days. Tom Kyte: Keeping Up with the Latest in Database Technology Tom Kyte expands on his keynote presentation at the Great Lakes Oracle Conference with tips for developers, DBAs and others who want to make sure they are prepared to work with the latest database technologies. That Jeff Smith: Oracle SQL Developer Oracle SQL Developer product manager Jeff Smith (yeah, that Jeff Smith) talks about his presentations at the Great Lakes Oracle Conference and shares his reaction to keynote speaker C.J. Date's claim that "SQL dropped the ball." Gwen Shapira: Hadoop and Oracle Database Oracle ACE Director Gwen Shapira @gwenshap talks about the fit between Hadoop and Oracle Database and dives into the details of why Oracle Loader for Hadoop is 5x faster. Kai Yu: Virtualization and Cloud Oracle ACE Director Kai Yu talks about the questions he is most frequently asked when he does presentations on cloud computing and virtualization. Mark Sewtz: APEX 4.2 Mobile App Development Application Express developer Marc Sewtz demos the new features he built into APEX4.2 to support Mobile App Development. Jeremy Schneider: RAC Attack Oracle ACE Jeremy Schneider @jer_s describes what you can expect when you come to a RAC (Real Application Cluster) Attack. Frits Hoogland: Exadata Under the Hood Oracle ACE Director Frits Hoogland (@fritshoogland) talks about the secret sauce under Exadata's hood. David Peake: APEX 4.2 New Features David Peake, PM for Oracle Application Express, gives a quick overview of some of the new APEX features. Greg Marsden: Hugepages = Huge Performance on Linux Greg Marsden of Oracle's Linux Kernel Engineering Team talks about some common customer performance questions and making the most of Oracle Linux 6 and Transparent HugePages. John Hurley: NEOOUG and GLOC 2013 Northeast Ohio Oracle User Group president John Hurley talks about the background and success of the 2013 Great Lakes Oracle Conference.

  Read the article

• Looking for zsh completion file for osX native commands

  - by Chiggsy

  I've been digging deep into what actually comes with osX in /usr/bin and especially /usr/libexec. Quite good stuff really, although the command syntax is a bit.. odd. Let me direct the curious to the command that made me think of this: networksetup -printcommands I can not think of a command that better illustrates the need for good completion. security -h perhaps, but those commands have a familiar easy-to-read format. I beseech the community, please point me to a place where I can find such a thing. I never type them right, and I ache for tab completion for this Anyone have any idea where I could grab something? I'd prefer to stand on the shoulders of giants instead of trying to make a zsh/bash completion script leap into the world, ready for battle, like Athena, from my forehead. I am no Zeus when it comes to compctl. Not at all.

  Read the article

• read data on ntfs partition - ubuntu

  - by albert green

  Hi, I had a win xp with an NTFS partion for programs (c:) and I installed ubuntu 10.10 on it. I will use ubuntu from now on. On the disk there was a space for the NTFS partition and free space. I created in the free space a new linux partition. So the new linux partition is a ext3. now from ubuntu I used the disk utility and saw that the windows is marked as free space. I had only one possibility, which is to create a partition, so I did as NTFS. I did NOT format it. I don't care about the windows system, I just need to access the program files folder on that partition and get my chrome bookmarks. I forgot to save them before the installation of linux. do you think it is possible? if so how? thanks.

  Read the article

• BizTalk - Removing BAM Activities and Views using bm.exe

  - by Stuart Brierley

  Originally posted on: http://geekswithblogs.net/StuartBrierley/archive/2013/10/16/biztalk---removing-bam-activities-and-views-using-bm.exe.aspxOn the project I am currently working on, we are making quite extensive use of BAM within our growing number of BizTalk applications, all of which are being deployed and undeployed using the excellent Deployment Framework for BizTalk 5.0.Recently I had an issue where problems on the build server had left the target development servers in a state where the BAM activities and views for a particular application were not being removed by the undeploy process and unfortunately the definition in the solution had changed meaning that I could not easily recreate the file from source control.  To get around this I used the bm.exe application from the command line to manually remove the problem BAM artifacts - bm.exe can be found at the following path:C:\Program Files (x86)\Microsoft BizTalk Server 2010\TrackingC:\Program Files (x86)\Microsoft BizTalk Server 2010\TrackingStep1 :Get the BAM Definition FileRun the following command to get the BAm definition file, containing the details of all the activities, views and alerts:bm.exe get-defxml -FileName:{Path and File Name Here}.xmlStep 2: Remove the BAM ArtifactsAt this stage I chose to manually remove each of my problem BAM activities and views using seperate command line calls.  By looking in the definition file I could see the names of the activities and views that I wanted to remove and then use the following commands to remove first the views and then the activities:bm.exe remove-view -name:{viewname}bm.exe remove-activity -name:{activityname}

  Read the article

• How to change the screen resolution in VNC viewer for Ubuntu 12.04 without a monitor?

  - by user325320

  I have Ubuntu 12.04 installed on a machine and I always use it remotely from VNC. When I have monitor connected to this machine, I can change the resolution of my VNC viewer in the following line: $vnc4server --geometry 1440x900 This worked for me, but I always use this machine remotely, I unplug the monitor and reboot. and the above command line not work anymore. Then I tried xrandr SZ: Pixels Physical Refresh *0 1024 x 768 ( 260mm x 195mm ) *60 Current rotation - normal Current reflection - none Rotations possible - normal Reflections possible - none There is only one option available, so I tried to add a new one. $cvt 1440 900 # 1440x900 59.89 Hz (CVT 1.30MA) hsync: 55.93 kHz; pclk: 106.50 MHz Modeline "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync $xrandr --newmode "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync $xrandr --addmode S2 "1440x900_60.00" then I checked with xrandr again and can't see the new mode added. I try to execute the following command and get error says my RandR is too old. $xrandr --output S2 --mode 1440x900_60.00 xrandr: Server RandR version before 1.2 but this does not make sense to me, if I plug in the monitor back and run the xrandr command, it works again! It seems that Ubuntu must conntect to a real monitor before I can change my resolution in my VNC viewer. Can anyone help? UPDATE: Finally I solved this problem by changing to tightvncserver $tightvncserver -geometry 1440x900 works for me. Thanks everything answered my question

  Read the article

• gVIM "put" driving me mad, how do I "put" at the beginning of a line

  - by crgnz

  I'm learning gVIM on Windows, and as I slowly learn more of the keystrokes I find myself using the mouse less and less, which is great. I have a couple of questions I've yet to figure out: I do a lot of copy and paste. So I use 'v' to enter VISUAL mode, use k/j to move up/down and select the lines, then hit 'y' to yank. I then go to the line where I want to insert, and hit 'p' to put, BUT the darn thing pastes after the 1st character. I can't move any further left, so I am definitely at the start of the line, so I find the 'p'ut behaviour of pasting 1 char after my cursor position to be supremely annoying. I switch between edit and command mode an awful lot, and my poor little finger on my left hand is getting sore from being stretched out to hit the 'Esc' key (to enter command mode) every few seconds. Is there a more finger-friendly way to enter command mode?

  Read the article

• gentoo install error

  - by alleria

  i installed gentoo by the handbook from official site , when i got into the step 7.b. Installing the Sources , the book says :Code Listing 2.2: Viewing the kernel source symlink, When you take a look in /usr/src you should see a symlink called linux pointing to your kernel source. but ,in my virtualbox, there is no such file! ,only a linux-3..3.38-gentoo directory in the src and when i tried to use cd linux-3.3.38-gentoo and make menuconfig , an error occured , init/Kconfig:389: can't open file "kernel/irq/Kconfig" how can i solve the problem?

  Read the article

• Oracle VM VirtualBox 4.0 Now Available

  - by Paulo Folgado

  Delivering on Oracle's commitment to open source, Oracle VM VirtualBox 4.0 is now available, further enhancing the popular, open source, cross-platform virtualization software.   "Oracle VM VirtualBox 4.0 is the third major product release in just over a year, and adds to the many new product releases across the Oracle Virtualization product line, illustrating the investment and importance that Oracle places on providing a comprehensive desktop to datacenter virtualization solution," says Wim Coekaerts, senior vice president, Linux and Virtualization Engineering, Oracle. "With an improved user interface and added virtual hardware support, customers will find Oracle VM VirtualBox 4.0 provides a richer user experience." Part of Oracle's comprehensive portfolio of virtualization solutions, Oracle VM VirtualBox enables desktop or laptop computers to run multiple guest operating systems simultaneously, allowing users to get the most flexibility and utilization out of their PCs, and supports a variety of host operating systems, including Windows, Mac OS X, most popular flavors of Linux (including Oracle Linux), and Oracle Solaris. Oracle VM VirtualBox 4.0 delivers increased capacity and throughput to handle greater workloads, enhanced virtual appliance capabilities, and significant usability improvements. Support for the latest in virtual hardware, including chipsets supporting PCI Express, further extends the value delivered to customers, partners, and developers. Highlights of Oracle VM VirtualBox 4.0 include New Open Architecture - Oracle and community developers can now create extensions that customize Oracle VM VirtualBox and add features not previously available.Enhanced Usability - A new scalable display mode enables users to view more virtual displays on their existing monitors. Improvements to VM management, including visual VM previews, an optional attributes display, and easy launch shortcut creation enables administrators and power users to customize the interface to make it as simple or as comprehensive as required.Increased Capacity and Throughput - A new asynchronous I/O model for networked (iSCSI) and local storage delivers significant storage related performance improvements, while new optimizations allow larger datacenter-class workloads, such as Oracle's middeware, to be run on 32-bit Windows hosts for testing and demo purposes. Powerful Virtual Appliance Sharing Capabilities - Enhanced support for standards-compliant OVF appliances and added support for OVA format descriptors. All information about a VM may be stored in a single folder to facilitate easier direct sharing among VMs. Support for Latest Virtual Hardware - A new, modern virtual chipset supporting PCI Express and other hardware enhancements including high-definition audio devices helps ensure support for the most demanding virtual workloads.

  Read the article

• links for 2010-04-19

  - by Bob Rhubart

  @lucasjellema: Book review -- Getting Started With Oracle SOA Suite 11g R1: A Hands-On Tutorial "I have to confess that I may be biased – or at least that I have a personal stake in books about the SOA Suite. I am currently in the final stages of writing the Oracle SOA Suite 11g Handbook, published by Oracle Press (see http://www.mhprofessional.com/product.php?isbn=0071608974 and http://wiki.oracle.com/page/Oracle+11g+SOA+Suite+Handbook for some supporting material and early screenshots) which you could consider a competitor to the book I am discussing here. I would suggest however that the two are quite complementary: after reading the Getting Started With Oracle SOA Suite 11g R1: A Hands-On Tutorial and concluding that you want to learn more and delve deeper into the SOA Suite and the concepts around it, it would make perfect sense to read my book, Oracle SOA Suite 11g Handbook, as that takes you to the next level." -- Oracle ACE Director Lucas Jellema of Amis Technology (tags: oracle otn oracleace soa bookreview soasuite) Terri Noyes: The Scoop: Oracle E-Business Suite Support on 64-bit Linux Terri Noyes addresses frequently asked questions about Oracle E-Business Suite (EBS) 64-bit Linux support. (tags: otn oracle ebs linux) Sunil S. Ranka: My session at Collaborate 10 – Las Vegas, Nevada, USA Sunil S. Ranka checking in from the Luxor with the details of his Collaborate 2010 presentation on Business Intelligence. (tags: oracle otn businessintelligence obiee collaborate2010) @bex: Bezzotech and IRA Merge Into One! Oracle ACE Director Bex Huff with details on his new partnership with Jason Clarkin from Impement R Advantage and their joint presentations at Collaborate 2010. (tags: oracle otn oracleace enterprise2.0 ucm collaborate2010) Mike Donohue: Collaborate 2010 Sunday Update - Oracle Business Intelligence Publisher Hands On Lab Updates on the session schedule an room numbers for the Oracle Business Intelligence Publisher Hands On Lab, 3:45 pm - 4:45 pm in Palm B. (tags: oracle otn collaborate2010 businessintelligence) @ORACLENERD: COLLABORATE: OAUG 20th Anniversary Chet "oraclenerd" Justice shares the details of his first day at Collaborate 2010. Venkatakrishnan J: Oracle EPM 11.1.1.3 & Oracle OLAP 11g – Reporting on Oracle OLAP using Essbase Excel Add-in/Smartview – XOLAP Some of the stuff Venkatakrishnan J was going to present at Collaborate 2010 until an Icelandic volcano got in the way. (tags: oracle olap businessintelligence database collaborate2010)

  Read the article

• Is it possible to show " New Task" of Task Manager from tasks of Task Manager only?

  - by WebMAOhist

  I work on remote Windows Server 2008 machine over RDP and frequently need to revive broken copy&pasting over RDP. Which is killing rdpclip process in Task Manger (tab "Processes") and launching it gain by: switching to tab Applications -- pressing button "New Task..." -- typing 'rdpclip'-- clicking OK. Well, I do not need to type 'rdpclip' if it is the last used command. The problem that in "Create New Task" of Windows Task Manager I always launch rdpclip only but it shows the last run program from Windows command prompt (Win +R), usually it is "notepad" for me. Is it possible to bind the last used command/task to Task Manager only? and how?

  Read the article

• Can't adjust backlight on an Nvidia 335m GT

  - by Vladimir

  I have a laptop mySN QMG6 / Chiligreen Mobilitas NW which is Quanta TW9 barebone with intel i3 and nvidia 335m GT onboard. On ubuntu distros 10.04, 10.10, 11.04 and 11.10 i had problem with changing screen backlight with nouveau and nvidia drivers. FN+F4/F5 buttons did not change my brightness. I tried to edit xorg.conf, adding Option “RegistryDwords” “EnableBrightnessControl=1? Also tried to add some lines to grub acpi_osi="Linux" acpi_backlight=vendor Neither worked for me. Today I installed Ubuntu 12.04 beta2 and... With nouveau driver my FN key works, and changes the brightness (is it a new 3.0.22 linux kernel, or patched nouveau driver, i don't know). This is a big step forward. But, when installing proprietary nvidia driver (295.33) FN button stops working and i can't change brightness. I also tried workaround with xorg and grub with no result. Tried to install acpi from apt - no result. Is there anything left to try? I really need that nvidia driver working with FN keys, as i would like to have a working 3D acceleration. P.S. Does the nouveau driver has 3d acceleration like nvidia drivers??? If there is need to provide some log data, please write what should i print, as i'm a bit new to Ubuntu. P.P.S. Same problems i had with other Linux distros (Mint, Fedora and others) P.P.P.S. Other FN buttons work with both drivers (Mute, VOL UP/DOWN, WiFi on/off, Bluetooth, Sleep, Start/Pause, Stop, Next/Prev song) Some new thoughts... CONFIG_BACKLIGHT_GENERIC=m could this be an issue? Made this by grep BACKLIGHT /boot/config-3.2.0-22-generic-pae Full grep output can be viewed here: http://pastebin.com/sMRd2Z4k

  Read the article

• Optimized CSF LFD to miminize false positive emails on new install? Centos6.2 + ISPConfig3

  - by Damainman

  I have a remote dedicated server running CentOS 6.2 x64bit with ISPConfig3. This is a brand new install. Server Purpose: Basic LAMP Web Hosting with PureFTPD, BIND, CLAMAV, RKHunter. Any advice or link to a guide which will clearly explain how to optimize the CSF+LFD configuration is greatly appreciated. I am not exactly sure on where to start what I shouldn't loosen the restrictions on. At the moment my inbox is flooding with alerts from LFD such as: Suspicious process running under user postfix Excessive resource usage: haldaemon Account: haldaemon Resource: Process Time Exceeded: 1823 1800 (seconds) Executable: /usr/sbin/hald Command Line: hald PID: 1031 Killed: No Excessive resource usage: amavis Time: Tue Jun 5 12:43:35 2012 -0700 Account: amavis Resource: Virtual Memory Size Exceeded: 330 200 (MB) Executable: /usr/bin/perl Command Line: amavisd (virgin child) PID: 27931 Killed: No Excessive resource usage: apache Time: Tue Jun 5 12:35:33 2012 -0700 Account: apache Resource: Virtual Memory Size Exceeded: 437 200 (MB) Executable: /usr/sbin/httpd Command Line: /usr/sbin/httpd PID: 27286 Killed: No

  Read the article

• How to know the root device size of some public AMI?

  - by red23jordan

  Since I do not want to pay money for my testing, the free limit size is 10G. I can know the root device root for some default AMI such as Amazon Linux AMI 2012.03 The Amazon Linux AMI 2012.03 is an EBS-backed, PV-GRUB image. It includes Linux 3.2, AWS tools, and repository access to multiple versions of MySQL, PostgreSQL, Python, Ruby, and Tomcat. Root Device Size: 8 GB And the last row displayed 8GB. However, if I find AMI in Community Page, it does not show the root device size. Can anyone know how to use the instance such as centOS that is not provided by default but it is under 10GB so that I can still free use?

  Read the article

• Cannot format SD memory card

  - by cool

  Hello everyone I have a SD memory card which is of local manufacturer it allows to read & copy from it but not write as it is now write-protected so i want to format that card but could not. To format this card I have tried 1) DD command 2) mkfs -f vfat command 3) creating registry entry under storage device policy in window with write value 0 4) disk part command in window to clear attributes in which it show all attributes are clear ie no write protection 5) I format card in windows through control panel - administrative tools- computer management - disk management, then it show as formatted but when I tried to create new partition it give CYCLIC REDUNDANCY CHECK error 6) I downloaded a format utility from transcend site and formatted first it shows write protected again doing format it formats and tells to remove and reinsert after reinsertion it shows the previous data as it is

  Read the article

• Vim: :silent with makeprg

  - by ash

  I use pylint on .py files for :make in my .vimrc, although any program, pylint or otherwise, applies to this problem. set makeprg=pylint\ --reports=n\ --output-format=parseable\ % When I run :make, I inevitably get the annoying Press ENTER or type command to continue prompt. I know this can be disabled with :silent, but I can't prepend it to the makeprg variable like this, because it throws an error: set makeprg=:silent "pylint\ --reports=n\ --output-format=parseable\ %" If I try to have my own "Silent make command," command Smake silent make The screen goes black after calling it. How would I do it?

  Read the article

• hp pavilion g6 1250 wireless problems

  - by Ahmed Kotb

  i have tried using ubuntu 10.04 and ubuntu 11.10 and both have the same problem the driver is detected by the additional propriety drivers wizard and after installation , ubuntu can't see except on wireless network which is not mine (and i can't connect to it as it is secured) there are plenty of wireless networks around me but ubuntu can't detect them and if i tried to connect to one of them as if it was hidden connection time out. the command lspci -nvn | grep -i net gives 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) iwconfig gives lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off i guess it is something related to Broadcom driver .. but i don't know , any help will be appreciated UPDATE: ok i installed a new copy of 11.10 to remove the effect of any trials i have made i followed the link (http://askubuntu.com/q/67806) as suggested all what i have done now is trying the command lsmod | grep brc and it gave me the following brcmsmac 631693 0 brcmutil 17837 1 brcmsmac mac80211 310872 1 brcmsmac cfg80211 199587 2 brcmsmac,mac80211 crc_ccitt 12667 1 brcmsmac then i blacklisted all the other drivers as mentioned in the link the wireless is still disabled.. in the last installation installing the Brodcom STA driver form the additional drivers enabled the menu but as i have said before it wasn't able to connect or even get a list of available networks so what should i do now ? the output of command rfkill list all rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Troubleshoot broken ZFS

  - by BBK

  I have one zpool called tank in RaidZ1 with 5x1TB SATA HDDs. I'm using Ubuntu Server 11.10 Oneric, kernel 3.0.0-15-server. Installed ZFS from ppa also I'm using zfs-auto-snapshot. The ZFS file system when zfs module loaded to the kernel hangs my computer. Before it I created few new file systems: zfs create -V 10G tank/iscsi1 zfs create -V 10G tank/iscsi2 zfs create -V 10G tank/iscsi3 I shared them through iSCSI by /dev/tank/iscsiX path. And my computer started to hanging sometimes when I used tank/iscsiX by iSCSI, do not know why exactly. I switched off iSCSI and started to remove this file systems: zfs destroy tank/iscsi3 I'm also using zfs-auto-snapshot so I had snapshots and without -r key my command not destroying the FS. So I issued next command: zfs destroy tank/iscsi3 -r The tank/iscsi3 FS was clean and contain nothing - it was destroyed without an issue. But tank/iscsi2 and tank/iscsi1 contained a lot of information. I tried zfs destroy tank/iscsi2 -r After some time my computer hang out. I rebooted computer. It didn't boot very fast, HDDs starts working like a crazy making a lot of noise, after 15 minutes HDDs stopped go crazy and OS booted at last. All seems to be ok - tank/iscsi2 was destroyed. After file systems at the tank was accessible, zpool status showed no corruption. I issued new command: zfs destroy tank/iscsi1 -r Situation was repeated - after some time my computer hang out. But this time ZFS seams not to healed itself. After computer switched on it started to work: loading scripts and kernel modules, after zfs starting to work it hanging my computer. I need to recover else ZFS file systems which lying in the same zpool. Few month ago I backup OS to flash drive. Booting from backed-up OS and import have the same results - OS starts hanging. How to recover my data at ZFS tank?

  Read the article

• Apache Passenger can't find gem

  - by purpletonic

  I'm running Ubuntu 10.04 and I've transferred over some sites built in Sinatra. I've set up Phusion passenger, but when I visit the sites I'm getting a Passenger LoadError claiming that passenger has 'no such file to load -- sinatra' yet when I run gem list or sudo gem list, I clearly see sinatra listed. Why can't passenger find this gem? My sudo gem env output looks like this RubyGems Environment: - RUBYGEMS VERSION: 1.3.5 - RUBY VERSION: 1.8.7 (2009-12-24 patchlevel 248) [x86_64-linux] - INSTALLATION DIRECTORY: /usr/local/lib/ruby/gems/1.8 - RUBY EXECUTABLE: /usr/local/bin/ruby - EXECUTABLE DIRECTORY: /usr/local/bin - RUBYGEMS PLATFORMS: - ruby - x86_64-linux - GEM PATHS: - /usr/local/lib/ruby/gems/1.8 - /root/.gem/ruby/1.8 - GEM CONFIGURATION: - :update_sources = true - :verbose = true - :benchmark = false - :backtrace = false - :bulk_threshold = 1000 - REMOTE SOURCES: - http://gems.rubyforge.org/ running 'sudo ruby -v' I see the following: ruby 1.8.7 (2009-12-24 patchlevel 248) [x86_64-linux], MBARI 0x6770, Ruby Enterprise Edition 2010.01 Is that correct, or should the two ruby versions match up correctly, displaying REE in both? Thanks in advance!

  Read the article

< Previous Page | 750 751 752 753 754 755 756 757 758 759 760 761  | Next Page >