Search Results

Search found 25400 results on 1016 pages for 'enable manual correct'.

Page 762/1016 | < Previous Page | 758 759 760 761 762 763 764 765 766 767 768 769  | Next Page >

• Internal but no external Citrix Access?

  - by leeand00

  We recently had to reload our configuration of Citrix on our server Server1, and since we have, we can access Citrix internally, but not externally. Normally we access Citrix from http://remote.xyz.org/Citrix/XenApp but since the configuration was reloaded we are met with a Service Unavailable message. Internally accessing the Citrix web application from http://localhost/Citrix/XenApp/ on Server1 we are able to access the web application. And also from machines on our local network using http://Server1/Citrix/XenApp/. I have gone into the Citrix Access Management Console and from the tree pane on the left clicked on Citrix Access Management Console->Citrix Resources->Configuration Tools->Web Interface->http://remote.xyz.org/Citrix/PNAgent Citrix Access Management Console->Citrix Resources->Configuration Tools->Web Interface->http://remote.xyz.org/Citrix/XenApp, which in both cases displays a screen that reads Secure client access. Here it offers me several options: Direct, Alternate, Translated, Gateway Direct, Gateway Alternate, Gateway Translated. I know that I can change the method of use by clicking Manage secure client access->Edit secure client access settings which opens a window that reads "Specify Access Methods", and below that reads "Specify details of the DMZ settings, including IP address, mask, and associated access method", I don't know what the original settings were, and I also don't know how our DMZ is configured so that I can specify the correct settings, to give access to our external users on the http://remote.xyz.org/Citrix/XenApp site. We have a vendor who setup our DMZ and does not allow us access to the gateway to see these settings. What sorts of questions should I ask them to restore remote access?

  Read the article

• get-eventlog issue

  - by Jim B

  I wanted to get a quick report of some log entries I saw on a server, so I ran: Get-Eventlog -logname system -newest 10 -computer fs1 | fl I got events back however the descriptions were all wrong. Here's an example: Index : 1260055 EntryType : Warning InstanceId : 2186936367 Message : The description for Event ID '-2108030929' in Source 'W32Time' cannot be found. The local compute r may not have the necessary registry information or message DLL files to display the message, or you may not have permission to access them. The following information is part of the event:'time. windows.com,0x1' Category : (0) CategoryNumber : 0 ReplacementStrings : {time.windows.com,0x1} Source : W32Time TimeGenerated : 1/25/2010 10:43:31 AM TimeWritten : 1/25/2010 10:43:31 AM UserName : Note that if I pull the event ID property it's correct (in this case 38) Is this is known issue or is something wrong. The messages resolve fine via event viewer locally and remotely Here is the powershell version info: Name : ConsoleHost Version : 2.0 InstanceId : bc58fcf8-bba3-4ca8-8972-17dbd5d9ff08 UI : System.Management.Automation.Internal.Host.InternalHostUserInterface CurrentCulture : en-US CurrentUICulture : en-US PrivateData : Microsoft.PowerShell.ConsoleHost+ConsoleColorProxy IsRunspacePushed : False Runspace : System.Management.Automation.Runspaces.LocalRunspace Here is the revised version info: Name Value ---- ----- CLRVersion 2.0.50727.3603 BuildVersion 6.0.6002.18111 PSVersion 2.0 WSManStackVersion 2.0 PSCompatibleVersions {1.0, 2.0} SerializationVersion 1.1.0.1 PSRemotingProtocolVersion 2.1

  Read the article

• Fix stubborn 'Setting locale failed.'

  - by plua

  I have a very stubborn, well-known locale error on Ubuntu 9.10: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TIME = "custom.UTF-8", LANG = "en_US.UTF-8" Tried the following: Added LANG=en_US.UTF-8 and LC_ALL=en_US.UTF-8 to /etc/environment Run apt-get install --reinstall locales (error: perl: warning: Falling back to the standard locale ("C"). /usr/bin/mandb: can't set the locale; make sure $LC_* and $LANG are correct) Run sudo dpkg-reconfigure locales. Result: Cannot set LC_ALL to default locale: No such file or directory, and then updates locales all locales including en_US.UTF-8 sudo locale-gen updates all locales successfully, including en_US.UTF-8 sudo locale-gen un_US en_US.UTF-8 gives no error nor other output In /etc/default/locale it says LANG="en_US.UTF-8" echo $LANG gives en_US.UTF-8 /var/lib/locales/supported.d/local says en_US.UTF-8 UTF-8 locale -a gives me: C en_AG en_AU.utf8 en_BW.utf8 en_CA.utf8 en_DK.utf8 en_GB.utf8 en_HK.utf8 en_IE.utf8 en_IN en_NG en_NZ.utf8 en_PH.utf8 en_SG.utf8 en_US.utf8 en_ZA.utf8 en_ZW.utf8 POSIX So well... I am pretty much out of options I can think of. Anybody any idea?? Thanks!

  Read the article

• How do I find out the Mac Address Firefox submits for Geolocation?

  - by Jim McKeeth

  I moved, but have the same router and cable box. Now when I visit Google Maps it still shows my old location. I went to the SkyhookWireless update page to update my Mac Address with my new location. The process is you put in your Mac address and it shows you the current location, and then you adjust that location and submit it. When I got the Mac Address from the status page on my router Skyhook reported that location as in Pakistan, which isn't even the correct continent (as my old or new address). I tried every other Mac address I could come up with: The cable router, the Wireless router's other Mac address, my PC's Mac address, etc. and none of them reported any location on the Skyhook page. So I am guessing that there is another Mac address, or some other bit of information that is used by Firefox when it reports to Google Maps my current location. Now that you have the back story, how do I find the Mac address or whatever information it is that Firefox (or other browsers) use to determine my Geolocation? Everything I have read online is rather vague. The next option I am considering is hooking a logging proxy onto Firefox and seeing what data it sends, but I'd rather find an easier method. Related: How do I update the geo location of my house?

  Read the article

• Why does Mysql Xampp restart only when i run the mysqld.exe file manually?

  - by Ranjit Kumar

  I am using mysql-xampp v3.0.2 version. while restarting the mysql server first it show me the running status and after 2or3s it stops running automatically. So as of now i got a temporary solution like going into xampp installation folder Xampp-mysql-bin-running the msqld.exe file. i dont know whether it is the correct solution or is there any alternate solution to be made !! please suggest me errorlog 120629 15:29:59 [Note] Plugin 'FEDERATED' is disabled. 120629 15:29:59 InnoDB: The InnoDB memory heap is disabled 120629 15:29:59 InnoDB: Mutexes and rw_locks use Windows interlocked functions 120629 15:29:59 InnoDB: Compressed tables use zlib 1.2.3 120629 15:29:59 InnoDB: Initializing buffer pool, size = 16.0M 120629 15:29:59 InnoDB: Completed initialization of buffer pool InnoDB: The first specified data file D:\xampp\xampp\mysql\data\ibdata1 did not exist: InnoDB: a new database to be created! 120629 15:29:59 InnoDB: Setting file D:\xampp\xampp\mysql\data\ibdata1 size to 10 MB InnoDB: Database physically writes the file full: wait... 120629 15:29:59 InnoDB: Log file D:\xampp\xampp\mysql\data\ib_logfile0 did not exist: new to be created InnoDB: Setting log file D:\xampp\xampp\mysql\data\ib_logfile0 size to 5 MB InnoDB: Database physically writes the file full: wait... 120629 15:30:00 InnoDB: Log file D:\xampp\xampp\mysql\data\ib_logfile1 did not exist: new to be created InnoDB: Setting log file D:\xampp\xampp\mysql\data\ib_logfile1 size to 5 MB InnoDB: Database physically writes the file full: wait... InnoDB: Doublewrite buffer not found: creating new InnoDB: Doublewrite buffer created InnoDB: 127 rollback segment(s) active. InnoDB: Creating foreign key constraint system tables InnoDB: Foreign key constraint system tables created 120629 15:30:02 InnoDB: Waiting for the background threads to start

  Read the article

• Apache HTTPD - Segmentation fault when loading mod_jk module

  - by hansengel

  I just set up mod_jk with my Apache httpd 2.0.52 installation, but now when I try to start Apache, it has a segmentation fault. I've checked that I am using the mod_jk compiled for 2.0.x.. built against the same version I have, in fact. I've also verified that the path I'm giving to LoadModule is correct, and the permissions and the ownership of the file are the same as the rest of the modules'. When I remove the "LoadModule" command for mod_jk from my httpd.conf, there is no segmentation fault. Nothing shows in Apache's error logs. I have tried restarting the server with this module using both service httpd restart and httpd. These are the last few lines returned of strace httpd -X: gettimeofday({1292100295, 434487}, NULL) = 0 socket(PF_INET6, SOCK_STREAM, IPPROTO_IP) = -1 EAFNOSUPPORT (Address family not supported by protocol) socket(PF_NETLINK, SOCK_RAW, 0) = 3 bind(3, {sa_family=AF_NETLINK, pid=0, groups=00000000}, 12) = 0 getsockname(3, {sa_family=AF_NETLINK, pid=22378, groups=00000000}, [12]) = 0 time(NULL) = 1292100295 sendto(3, "\24\0\0\0\26\0\1\3\307\342\3M\0\0\0\0\0\305\333\267", 20, 0, {sa_family=AF_NETLINK, pid=0, groups=00000000}, 12) = 20 recvmsg(3, {msg_name(12)={sa_family=AF_NETLINK, pid=0, groups=00000000}, msg_iov(1)=[{"<\0\0\0\24\0\2\0\307\342\3MjW\0\0\2\10\200\376\1\0\0\0"..., 4096}], msg_controllen=0, msg_flags=0}, 0) = 664 recvmsg(3, {msg_name(12)={sa_family=AF_NETLINK, pid=0, groups=00000000}, msg_iov(1)=[{"\24\0\0\0\3\0\2\0\307\342\3MjW\0\0\0\0\0\0\1\0\0\0\10\0"..., 4096}], msg_controllen=0, msg_flags=0}, 0) = 20 close(3) = 0 socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 3 --- SIGSEGV (Segmentation fault) @ 0 (0) --- +++ killed by SIGSEGV +++ Process 22378 detached Has anyone had a similar problem using Apache 2.0.52 with mod_jk? I might try downloading and building the source for the Apache server and mod_jk myself if there isn't a discovered fix for this.

  Read the article

• Can not join additional domain controllers

  - by Hosm

  Hi all, I had a dead PDC and another not so synced domain controller for my domain. using comments here link now the so called secondary domain controller has seized domain controls and I can verify it from dsa.msc that it is a domain controller. I set up another domain controller (win2003SRV) and about to promote an AD on it as a domain controller for my domain. When I try to join the new domain controller to the domain I face DNS problem. here is some more detail DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain DOMNAME.A.B: The query was for the SRV record for _ldap._tcp.dc._msdcs.DOMNAME.A.B The following domain controllers were identified by the query: update.DOMNAME.A.B Common causes of this error include: - Host (A) records that map the name of the domain controller to its IP addresses are missing or contain incorrect addresses. - Domain controllers registered in DNS are not connected to the network or are not running. For information about correcting this problem, click Help. it is worth noting that update.DOMNAME.A.B is the current domain controller to which I'd like to add another controller named PDC.DOMNAME.A.B Ip address of update.DOMNAME.A.B is 192.168.200.1 and for pdc.DOMNAME.A.B is 192.168.200.100 querying DNS on both machine return correct results. Any idea?

  Read the article

• ISA Server 2006 SSL Certificate Dilemma

  - by JohnyD

  I'm making so great headway in offering our services over https with help from a Go Daddy certificate, later to be upgraded to Thawte SSL123 certs. But, I've just run into one whopper of a problem. Here's my setup: I run an ISA 2006 firewall. Our web services are distributed over 2 servers. One is Windows 2000 (www.domain.com) and the other is Windows 2003 (services.domain.com). So, I'll need to purchase 2 certs for both www and services, import them into IIS6 on their respective machines, then export them with the primary key (making sure to Include all certificates in the certification path if possible... that had me stumped for a while), and then to finally import them into ISA's local computer Personal store. The problem I've just run into is that I have separate firewall rules for services.domain.com and www.domain.com... because requests need to be forwarded to different web servers. Each of these firewall rules use the same httplistener. I have just found out that you can only use 1 certificate per httplistener. To make matters worse you can only have a single httplistener per ip / port. Is this correct? I can only use a single certificate for a single ip address? This would seem to be a severe limitation. Am I wrong? If I'm not then I've got a whole lot more work ahead of me as I'll have to set up extra ip's, add them to the firewall's network interface, create new listeners using that ip, etc... Can someone please confirm that I'm doing this correctly / incorrectly? Once I got my head wrapped around it all it seemed easy... then this. Thanks in advance.

  Read the article

• How do I grant a database role execute permissions on a schema? What am I doing wrong?

  - by Lewray

  I am using SQL Server 2008 Express edition. I have created a Login , User, Role and Schema. I have mapped the user to the login, and assigned the role to the user. The schema contains a number of tables and stored procedures. I would like the Role to have execute permissions on the entire schema. I have tried granting execute permission through management studio and through entering the command in a query window. GRANT EXEC ON SCHEMA::schema_name TO role_name But When I connect to the database using SQL management studio (as the login I have created) firstly I cannot see the stored procedures, but more importantly I get a permission denied error when attempting to run them. The stored procedure in question does nothing except select data from a table within the same schema. I have tried creating the stored procedure with and without the line: WITH EXECUTE AS OWNER This doesn't make any difference. I suspect that I have made an error when creating my schema, or there is an ownership issue somewhere, but I am really struggling to get something working. The only way I have successfully managed to execute the stored procedures is by granting control permissions to the role as well as execute, but I don't believe this is the correct, secure way to proceed. Any suggestions/comments would be really appreciated. Thanks.

  Read the article

• MD3200 - 3 to 4x less throughput than MD1220. Am I missing something here?

  - by Igor Polishchuk

  I have two R710 servers with similar configuration. One in my office has MD1220 attached. Another one in the datacenter of my hosting services vendor has MD3200. I'm getting significantly worse throughput from MD3200 at my vendors setup. I'm mostly interested in sequential writes, and I'm getting these results in bonnie++ and dd tests: Seq. writes on MD1220 in my office: 1.1 GB/s - bonnie++, 1.3GB/s - dd Seq. writes on MD3200 at my vendor's: 240MB/s - bonnie++, 310MB/s - dd Unfortunately, I could not test the exactly the same configurations, but the two I have should be comparable. If anything, my good performing environment is cheaper than the bad performing. I expect at least similar throughput from these two setups. My vendor cannot really help me. Hopefully, somebody more familiar with the DAS performance can look at it and tell if I'm missing something here and my expectations are too high. To summarize, the question here is it reasonable to expect about 100MB/s of sequential write throughput per each couple of drives in RAID10 on MD3200? Is there any trick to enable such performance in MD3200 with dual controller as opposed to simple MD1220 with a single H800 adapter? More details about the configurations: A good one in my office: Dell R710 2CPU X5650 @ 2.67GHz 12 cores 96GB DDR3, OS: RHEL 5.5, kernel 2.6.18-194.26.1.el5 x86_64 20x300GB 2.5" SAS 10K in a single RAID10 1MB chunk size on MD1220 + Dell H800 I/O controller with 1GB cache in the host Not so good one at my vendor's: Dell R710 2CPU L5520 @ 2.27GHz 8 cores 144GB DDR3, OS: RHEL 5.5, kernel 2.6.18-194.11.4.el5 x86_64 20x146GB 2.5" SAS 15K in a single RAID10 512KB chunk size, Dell MD3200, 2 I/O controllers in array with 1GB cache each Additional information. I've also ran the same tests on the same vendor's host, but the storage was: two raids of 14x146GB 15K RPM drives RAID 10, striped together on the OS level on MD3000+MD1000. The performance was about 25% worse than on MD3200 despite having more drives. When I ran similar tests on the internal storage of my vendor's host (2x146GB 15K RPM drives RAID1, Perc 6i) I've got about 128MB/s seq. writes. Just two internal drives gave me about a half of 20 drives' throughput on MD3200. The random I/O performance of the MD3200 setup is ok, it gives me at least 1300 IOPS. I'm mostly have problems with sequentioal I/O throughput. Thank you for looking into it. Regards Igor

  Read the article

• Cisco SG200 vlan issue in ESXi VSA cluster

  - by George

  I have three Cisco SG200-26 switches, and I also have two ESXi hosts that I have connected like shown in the below "best practice" map by VMware: http://communities.vmware.com/servlet/JiveServlet/previewBody/17393-102-1-22458/VSA_networking_map.pdf Even though I created the VLANs in the SG200 and I set the two VLANs (508 and 608) as allowed for these untagged ports (where my ESX NIC's are connected), I can not ping from host 1 to host 2 when configuring the NIC's to use 608 VLAN. Am I missing something? my IP's are all in the 192.168. range, and the only reason I need the VLANs is to isolate the traffic of VSA back-end internally, only the two hosts will be using the VLANs. So I think I do not have to create virtual interfaces on my router since that's the case, is my understanding correct? Also sending my switch config screenshot below.. all 3 switches have the latest firmware (it seems these were originally linksys and got rebranded as cisco after the acquisition) http://img31.imageshack.us/img31/2503/switch.gif Any ideas what to change on the Cisco SG200 to make this work , would be appreciated! The second VLAN (608) only needs two IP's: 192.168.0.1 and 192.168.0.2 The first VLAN (508) will have about 15 IP's for ESXi Management and VSA cluster service, I could use either 192.168.1.xx or 10.0.1.xx The rest of my network (about 50 clients) is in 192.168.1.xx range VMware also states that the VLAN protocol on the physical switch must be 802.1Q, not ISL, anyone knows which of the two my SG200-26 uses? In addition to that, the only requirement from VSA is that my two hosts: -Are in the same subnet. -Have static IP addresses set. -Have the same Default Gateway configured. If I need inter-vlan routing for this, I suppose I have to create virtual interfaces on my sonicwall, and assign an IP for each VLAN, and then set routes between them? Thank you for your time!

  Read the article

• nginx + wordpress in /wordpress subdir

  - by nkr1pt

  I installed nginx and would like to setup wordpress as a final step. I followed many howtos but am unable to get it working. The setup is fairly straightforward, the root dir of the webserver is /data/Sites/nkr1pt.homelinux.net. In that root dir I created a symlink to the wordpress folder in /usr/local/wordpress, so in fact all wordpress files can be accessed at /data/Sites/nkr1pt.homelinux.net/wordpress. Permissions are ok. The plan is to get wordpress working at http://sirius/wordpress, the server's name is sirius. spawn-fcgi is running and listening on port 7777. Here you can see the relevant config: server { listen 80; listen 8080; server_name sirius; root /data/Sites/nkr1pt.homelinux.net; passenger_enabled on; passenger_base_uri /redmine; #charset koi8-r; #access_log logs/access.log main; location ^~ /data { root /data/Sites/nkr1pt.homelinux.net; autoindex on; auth_basic "Restricted"; auth_basic_user_file htpasswd; } location ^~ /dump { root /data/Sites/nkr1pt.homelinux.net; autoindex on; } location ^~ /wordpress { try_files $uri $uri/ /wordpress/index.php; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:7777 location ~ \.php$ { #fastcgi_split_path_info ^(/wordpress)(/.*)$; fastcgi_pass localhost:7777; #fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; #index index.php; } please note that redmine, and the locations dump and data are working perfectly, it is only wordpress that I cannot get to work. Can you please help me to the correct wordpress configuration in nginx? All help is much appreciated!

  Read the article

• When using procmail with maildir, it returns error with code I found

  - by bradlis7

  I'm not an expert at procmail, but I have this code: DROPPRIVS=yes DEFAULT=$HOME/Maildir/ :0 * ? /usr/bin/test -d $DEFAULT || /bin/mkdir $DEFAULT { } :0 E { # Bail out if directory could not be created EXITCODE=127 HOST=bail.out } MAILDIR=$HOME/Maildir/ But, when the directory already exists, sometimes it will send a return email with this error: 554 5.3.0 unknown mailer error 127. The email still gets delivered, mind you, but it sends back an error code. I fixed this temporarily by commenting out the EXITCODE and HOST lines, but I'd like to know if there is a better solution. I found this block of code in multiple places across the net, but couldn't really find why this error was coming back to me. It seems to happen when I send an email to a local user, sometimes the user has a .forward file to send it on to other users, sometimes not, but the result has been the same. I also tried removing DROPPRIVS, just in case it was messing up the forwarding, but it did not seem to affect it. Is the line starting with * ? /usr/bin/test a problem? The * signifies a regex, but the ? makes it return an integer value, correct? What is the integer being matched against? Or is it just comparing the integer return value? Thanks for the help.

  Read the article

• .com domain transfer failing

  - by digital

  Hi, I'm trying to transfer one of my .com addresses between registrars. I'm down as the owner contact (confirmed working) and the losing registrar is down as the tech and admin contact. Last week I received an email stating that the domain transfer had been rejected by the losing registrar. I contacted the losing registrar and they denied that. My money from the winning registrar was refunded and I was told to try again. I've initiated the transfer again and received confirmation of pending transfer, I gave the correct EPP code and confirmed the transfer. Currently the status on the domain is set as OK, should it not be transfer pending? According to my name.com transfer page if the transfer is not authd in 5 days it will auto transfer anyway. I don't believe this will happen. Name.com have been really helpful but they can't really do much more now. The losing registrar is not being helpful hence me turning here. What can I do to make sure the domain transfers? The domain transfer is set to expire on the 17th. Any help would be greatly appreciated.

  Read the article

• Time drift in Cloud Server - need to mainpulate GRUB config

  - by Aditya Advani

  We are hosting a VPS on a popular host and are experiencing a regular time drift of several minutes a day forward (approx 7). Linux Kernel: 2.6.18-164.11.1.el5 GNU/Linux Distro: CentOS release 5.4 (Final) We reached out to our hosting provider and their support advised us " This is a known issue with Cloud Servers. To fix this you will need to add one line to your grub config located at: /boot/grub/menu.lst The line you need to add is: noapic nolapic divider=10 nolapic_timer This should correct this issue. You will need to restart after this is added in. " Because I am wary of manipulating grub, mostly I'm terrified that our server may fail to restart - I ask you guys, the pro *nix admins - where exactly in this file does the recommended insertion below: # line from 1&1 for time syncing issue (Case 5163) noapic nolapic divider=10 nolapic_timer go? Please specify where exactly, and whether the order of commands is or is not important. Why is the block below "title CentOS ..." indented? If someone could give me an overview of how this works or point me to a resource that's easy to follow, that's what I'm looking for immediately, a light overview or basic understanding of what I;m doing. If GRUB and bootloaders are a deep dark treasure trove of kernel hacking or something, that's great well-recommended in-depth resources are also very welcome. This is my current /boot/grub/menu.lst # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file #boot=/dev/sda # serial --unit=0 --speed=57600 terminal --timeout=5 serial console timeout=5 title CentOS (2.6.18-164.11.1.el5) root (hd0,0) kernel /boot/vmlinuz-2.6.18-164.11.1.el5 ro root=/dev/hda1 console=tty0 console=tty initrd /boot/initrd-2.6.18-164.11.1.el5.img MOST IMPORTANT: I need to know where in the file above it is appropriate to paste the suggested line so I can confidently restart my VPS after manipulating GRUB config

  Read the article

• Editing a windows XP installation's registry without being able to log in.

  - by Alain

  I've got a windows XP installation that has a corrupt registry. A worm (which was removed) had hijacked the HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon entry (which should have a value of Userinit=C:\windows\system32\userinit.exe When the worm was removed, the corrupt entry was deleted entirely, and now the system automatically logs off immediately after attempting to log in. Regardless of the user and boot mode, no accounts can be logged in to. The only thing required to correct this behavior is to restore the registry key, but I cannot come up with any ways of editing the registry without logging in to an account. I tried remotely connecting to the registry but the required services aren't enabled on the machine. I tried booting on the same machine using the BartPE boot CD but I could not find any way of editing the registry on the C:\Windows installation - running regedit only modifies the X:\I386\ registry in memory. So, what can I use modify the registry of an un-login-able Windows XP instance so that I can log in again? Thanks guys. EDIT: The fix worked. The solution to the auto-logoff problem was, as hoped, to simply add the value mentioned above to the appropriate registry entry. This can be done using the BartPE Boot CD, as described in the accepted answer below, but I used the Offline NT Registry Editor software mentioned in another answer. The steps were: Boot from the NT Registry Editor CD Follow the directions until the appropriate boot sector is loaded. Instead of using one of the default options for modifying passwords or user accounts, type "software" to edit that hive. Type '9' to enter the command line based registry editor. Type "cd Microsoft" (enter) "cd Windows NT" (enter) "cd CurrentVersion" (enter) "cd Winlogon" (enter) Type "nv 1 Userinit" to create a new value under the Winlogon key Type "ev Userinit" to edit the new value, and when prompted, type "C:\windows\system32\userinit.exe" (enter) Type 'q' to quit the registry editor, and as you back out of the system, follow directions to write the hive back to disk. Restart your computer and log in - problem solved. (generic 'warning: back up your registry' disclaimer)

  Read the article

• pfsense 2.0.1 Firewall SMB Share not showing up under network

  - by atrueresistance

  I have a freenas NAS with a SMB share running at 192.168.2.2 of a 192.168.2.0/28 network. Gateway is 192.168.2.1. Originally this was running on a switch with my LAN, but now having upgraded to new hardware the Freenas has it's own port on the firewall. Before the switch the freenas would show up under Network on a windows 7 box and an OSX Lion box as freenas{wins} or CIFS shares on freenas{osx} so I know it doesn't have anything do to with the freenas. Here are my pfsense rules. ID Proto Source Port Destination Port Gateway Queue Schedule Description PASS TCP FREENAS net * LAN net 139 (NetBIOS-SSN) * none cifs lan passthrough PASS TCP FREENAS net * LAN net 389 (LDAP) * none cifs lan passthrough PASS TCP FREENAS net * LAN net 445 (MS DS) * none cifs lan passthrough PASS UDP FREENAS net * LAN net 137 (NetBIOS-NS) * none cifs lan passthrough PASS UDP FREENAS net * LAN net 138 (NetBIOS-DGM) * none cifs lan passthrough BLOCK * FREENAS net * LAN net * * none BLOCK * FREENAS net * OPTZONE net * * none BLOCK * FREENAS net * 192.168.2.1 * * none PASS * FREENAS net * * * * none BLOCK * * * * * * none I can connect if I use \\192.168.2.2 and enter the correct login details. I would just like this to show up on the network. Nothing in the log seems to be blocked when I filter by 192.168.2.2. What port am I missing for SMB to show up under the network and not have to connect by IP? ps. Do I really need the LDAP rule?

  Read the article

• Sshfs is not working..

  - by Devrim

  Hi, When I run sshpass -p 'mypass' sshfs 'root'@'68.19.40.16':/ '/dir' -o StrictHostKeyChecking=no,debug It successfully mounts but it runs on foreground. When I run without 'debug' parameter, it doesn't mount at all. Server is ubuntu 8.04 Any ideas why? UPDATE: When I run the command as ROOT it does mount. It doesn't work with other users. here is the output of an unsuccessful mount $ sshpass -p 'pass' sshfs 'root'@'68.1.1.1':/ '/s6' -o StrictHostKeyChecking=no,sshfs_debug,loglevel=debug debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 68.1.1.1 [68.1.1.1] port 22. debug1: Connection established. debug1: identity file /var/www/vhosts/devrim.kodingen.com/.ssh/id_rsa type -1 debug1: identity file /var/www/vhosts/devrim.kodingen.com/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5 debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_4.7p1 Debian-8ubuntu1.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY Warning: Permanently added '68.1.1.1' (RSA) to the list of known hosts. debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /var/www/vhosts/devrim.kodingen.com/.ssh/id_rsa debug1: Trying private key: /var/www/vhosts/devrim.kodingen.com/.ssh/id_dsa debug1: Next authentication method: password debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug1: Entering interactive session. debug1: Sending environment. debug1: Sending env LANG = en_GB.UTF-8 debug1: Sending subsystem: sftp Server version: 3 debug1: channel 0: free: client-session, nchannels 1 debug1: fd 0 clearing O_NONBLOCK debug1: Killed by signal 1.

  Read the article

• ATI gpu (video accel, decode, encode, ATI Stream, DXVA)

  - by Shiki

  Okay its a long question title for sure. I'm looking for a new video card (yes,SU is not a page for that, but wait). I've been a loyal NVidia customer ever since, now using a 8600gts. Old but still somewhat good, its a bit slow though. I want an upgrade because 8600gts wont support better vdpau and new features. I checked out the prices and the documents, I would need a GTX260 card. Which costs ..well.. a lot. ATI performs much better for that price. (At least on every test it outperforms GTX260). However, as far as I know there is no gpu accel with ATI. The things you can use is DXVA only, no other method. Could you correct me out there? Will be there a gpu accel for ATI also? Or is there one available? (DXVA is not bad, but kinda slow compared to NVIdia's CUDA.) What about openCL? How does ATI support that? (I'm talking about the 5850 ATI card at the minute, I would buy that instead of the NVidia.)

  Read the article

• Looking for updated BIOS for '99 Gateway in order to format/recognize >127 GB HD

  - by Jeff

  I have a '99 Gateway that's apparently too old for even Gateway to acknowledge it exists. Want to use it as a media hub and put in a 320GB HD, but it will not format above 127GB even running Win XP SP3. Read somewhere that upgrading the BIOS may do the trick, but I can't find the correct BIOS, and GW has been no help. Hoping I can just upgrade the BIOS, which is 11 years old. Any help would be much appreciated! I don't know where to look, and searches have been fruitless. System info: OS Name Microsoft Windows XP Home Edition Version 5.1.2600 Service Pack 3 Build 2600 OS Manufacturer Microsoft Corporation System Name xxxx System Manufacturer Gateway System Model TABOR_II System Type X86-based PC Processor x86 Family 6 Model 7 Stepping 3 GenuineIntel ~596 Mhz BIOS Version/Date Intel Corp. 4W4SB0X0.15A.0015.P10, 9/28/1999 SMBIOS Version 2.1 BIOS info (from a free app I located): BIOS Type: Phoenix BIOS Date: September 28th 1999 BIOS ID: 4W4SB0X0.15A.0015.P10.9909281445-None BIOS OEM: 4W4SB0X0.15A.0015.P10 Chipset: Intel 440BX/ZX rev 3 SuperIO: SMC 70x or 80x rev 0 at port 0370 Manufacturer: Gateway Motherboard: WS440BX

  Read the article

• How to fix a Postfix/MySQL/Dovecot Unknown Host Issue?

  - by thiesdiggity

  I am having an issue with one of my Postfix/Dovecot mail servers and I'm unsure how to fix the problem. I will try to explain it in detail, here it goes: I have an Ubuntu server setup using Virtual hosting with Postfix, Dovecot and MySQL. We have one domain setup as a virtual domain, for this example I am going to use mail.example.com. Under that domain we have one email address. I have another server (MS Exchange) setup using another one of my sub-domains, ex.example.com. The problem is that when I SMTP into the account on mail.example.com and try to send an email to an account on ex.example.com, I get the email returned back to us with an "unknown host" error. Now, I know that the mail.example.com server can resolve the ex.example.com domain because I can ping/dig while SSH'd into it. I can also log into Postfix via Telnet and send an email to an ex.example.com mailbox. I'm guessing that it has something to do with Postfix/Dovecot looking locally for the domain in the virtual domain list because of the tld domain (example.com)? If that's the case, how do I get Postfix/Dovecot to only look locally for the entire URL (mail.example.com) and if it doesn't find it, send it to the correct server by looking up the MX/A records (which I know exist and are setup correctly)? I have been working on this all day and any guidance would be GREATLY appreciated! Thanks for your time!

  Read the article

• Problem running mysql client, cannot connect to mysql server

  - by ehsanul

  Edit3: Thanks for the help everyone. Sorry for wasting anybody's time, but it seems like a simple reboot solved it. I should've known better, but I just had the assumption that the "restart" solution is mostly valid just for MS Windows (no offense). I'll keep this in mind before I ask a question here again. I installed the mysql-client-5.0 and mysql-server-5.0 packages on Ubuntu 8.04, using sudo apt-get install. When I try to run the "mysql" command, I get the following error: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) To verify that mysql server is running, I tried this, and it does seem to be running, with the correct socket too: $ ps aux | grep mysql root 13388 0.0 0.0 1772 528 ? S 06:24 0:00 /bin/sh /usr/bin/mysqld_safe mysql 13553 0.0 1.4 127012 15332 ? Sl 06:25 0:00 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-external-locking --port=3306 --socket=/var/run/mysqld/mysqld.sock root 13555 0.0 0.0 3008 696 ? S 06:25 0:00 logger -p daemon.err -t mysqld_safe -i -t mysqld ehsanul 16910 0.0 0.0 3092 772 pts/4 R+ 07:17 0:00 grep mysql So I don't understand why I'm getting an error trying to connect to mysql server. Note that I'm completely new to mysql. Edit: As requested in comments, the exact command that is returning the error is simply "sudo mysql". And when I check netstats for active networks services, I do see an entry for port 3306, with Protocol: tcp, IP Source: 127.0.0.1, State: LISTEN Edit2: It appears as if the /var/run/mysqld/mysqld.sock socket doesn't exist (if I'm interpreting the following output correctly): $ ls -al /var/run/mysqld/ total 0 drwxr-xr-x 2 mysql root 40 2009-08-06 06:36 . drwxr-xr-x 20 root root 860 2009-08-06 06:25 ..

  Read the article

• Clicking a link in IE6 doesn't load page (internal DNS entry on our intranet)

  - by Callum

  I have a very strange problem that is only affecting some versions of IE6. The problem does affect IE 6.0.2900.5512, but does not seem to affect 6.0.3790.3959 Basically I work for a company and we have an intranet. While I'm not an expert on "internal DNS pointers", what I was able to do was create a website (let's say about football), and when an employee who is sitting behind the company firewall types the word "football" in to the web address bar of their web browser, they get redirected to a particular server. I am told this is some kind "internally pointing DNS entry". So, I've set one of these up, and I have a placed a link to it on our company intranet page. However, when the link is clicked in IE6.0.2900.5512, the page goes blank. Clicking "refresh" then loads the correct page (the one specified in the link). Can anyone help me out here. I have tried changing the way URL is formed, everything from //football to http://football/ etc. The link works fine in every other browser and IE7+, but unfoturnatly, IE6 is still the most common browser in use at my organisation.

  Read the article

• setting up a basic mod_proxy virtual host

  - by SevenProxies

  I'm trying to set up a basic virtual host to proxy all requests to test.local to a WEBrick server I have running on 127.0.0.1:8080 while keeping all requests to localhost going to my static files in /var/www. I'm running Ubuntu 10.04. I have libapache2-mod-proxy-html installed and I have the module enabled with a2enmod proxy. I also have my virtual host enabled. However, whenever I go to test.local I always get a cryptic 500 server error and all my logs are telling me is: [Thu Mar 03 01:43:10 2011] [warn] proxy: No protocol handler was valid for the URL /. If you are using a DSO version of mod_proxy, make sure the proxy submodules are included in the configuration using LoadModule. Here's my virtual host: <VirtualHost test.local:80> LoadModule proxy_module /usr/lib/apache2/modules/mod_proxy.so ServerAdmin webmaster@localhost ServerName test.local ProxyPreserveHost On # prevents this folder from being proxied ProxyPass /static ! DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> <Proxy *> Order allow,deny Allow from all </Proxy> ProxyPass / http://localhost:8080/ ProxyPassReverse / http://localhost:8080/ ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined and here's my settings for mod_proxy: <IfModule mod_proxy.c> #turning ProxyRequests on and allowing proxying from all may allow #spammers to use your proxy to send email. ProxyRequests Off <Proxy *> # default settings #AddDefaultCharset off #Order deny,allow #Deny from all ##Allow from .example.com AddDefaultCharset off Order allow,deny Allow from all </Proxy> # Enable/disable the handling of HTTP/1.1 "Via:" headers. # ("Full" adds the server version; "Block" removes all outgoing Via: headers) # Set to one of: Off | On | Full | Block ProxyVia On </IfModule> Does anybody know what I'm doing wrong? Thanks

  Read the article

• saslauthd authentication error

  - by James

  My server has developed an expected problem where I am unable to connect from a mail client. I've looked at the server logs and the only thing that looks to identify a problem are events like the following: Nov 23 18:32:43 hig3 dovecot: imap-login: Login: user=, method=PLAIN, rip=xxxxxxxx, lip=xxxxxxx, TLS Nov 23 18:32:55 hig3 postfix/smtpd[11653]: connect from xxxxxxx.co.uk[xxxxxxx] Nov 23 18:32:55 hig3 postfix/smtpd[11653]: warning: SASL authentication failure: cannot connect to saslauthd server: No such file or directory Nov 23 18:32:55 hig3 postfix/smtpd[11653]: warning: xxxxxxx.co.uk[xxxxxxxx]: SASL LOGIN authentication failed: generic failure Nov 23 18:32:56 hig3 postfix/smtpd[11653]: lost connection after AUTH from xxxxxxx.co.uk[xxxxxxx] Nov 23 18:32:56 hig3 postfix/smtpd[11653]: disconnect from xxxxxxx.co.uk[xxxxxxx] The problem is unusual, because just half an hour previously at my office, I was not being prompted for a correct username and password in my mail client. I haven't made any changes to the server, so I can't understand what would have happened to make this error occur. Searches for the error messages yield various results, with 'fixes' that I'm uncertain of (obviously don't want to make it worse or fix something that isn't broken). When I run testsaslauthd -u xxxxx -p xxxxxx I also get the following result: connect() : No such file or directory But when I run testsaslauthd -u xxxxx -p xxxxxx -f /var/spool/postfix/var/run/saslauthd/mux -s smtp I get: 0: OK "Success." I found those commands on another forum and am not entirely sure what they mean, but I'm hoping they might give an indication of where the problem might lie. If it makes any difference, I'm running Ubuntu 10.04.1, Postfix 2.7.0 and Webmin/ Virtualmin.

  Read the article

< Previous Page | 758 759 760 761 762 763 764 765 766 767 768 769  | Next Page >