Search Results

Search found 44884 results on 1796 pages for 'web technologies'.

Page 763/1796 | < Previous Page | 759 760 761 762 763 764 765 766 767 768 769 770  | Next Page >

• Linux-Containers — Part 1: Overview

  - by Lenz Grimmer

  "Containers" by Jean-Pierre Martineau (CC BY-NC-SA 2.0). Linux Containers (LXC) provide a means to isolate individual services or applications as well as of a complete Linux operating system from other services running on the same host. To accomplish this, each container gets its own directory structure, network devices, IP addresses and process table. The processes running in other containers or the host system are not visible from inside a container. Additionally, Linux Containers allow for fine granular control of resources like RAM, CPU or disk I/O. Generally speaking, Linux Containers use a completely different approach than "classicial" virtualization technologies like KVM or Xen (on which Oracle VM Server for x86 is based on). An application running inside a container will be executed directly on the operating system kernel of the host system, shielded from all other running processes in a sandbox-like environment. This allows a very direct and fair distribution of CPU and I/O-resources. Linux containers can offer the best possible performance and several possibilities for managing and sharing the resources available. Similar to Containers (or Zones) on Oracle Solaris or FreeBSD jails, the same kernel version runs on the host as well as in the containers; it is not possible to run different Linux kernel versions or other operating systems like Microsoft Windows or Oracle Solaris for x86 inside a container. However, it is possible to run different Linux distribution versions (e.g. Fedora Linux in a container on top of an Oracle Linux host), provided it supports the version of the Linux kernel that runs on the host. This approach has one caveat, though - if any of the containers causes a kernel crash, it will bring down all other containers (and the host system) as well. For example, Oracle's Unbreakable Enterprise Kernel Release 2 (2.6.39) is supported for both Oracle Linux 5 and 6. This makes it possible to run Oracle Linux 5 and 6 container instances on top of an Oracle Linux 6 system. Since Linux Containers are fully implemented on the OS level (the Linux kernel), they can be easily combined with other virtualization technologies. It's certainly possible to set up Linux containers within a virtualized Linux instance that runs inside Oracle VM Server for Oracle VM Virtualbox. Some use cases for Linux Containers include: Consolidation of multiple separate Linux systems on one server: instances of Linux systems that are not performance-critical or only see sporadic use (e.g. a fax or print server or intranet services) do not necessarily need a dedicated server for their operations. These can easily be consolidated to run inside containers on a single server, to preserve energy and rack space. Running multiple instances of an application in parallel, e.g. for different users or customers. Each user receives his "own" application instance, with a defined level of service/performance. This prevents that one user's application could hog the entire system and ensures, that each user only has access to his own data set. It also helps to save main memory — if multiple instances of a same process are running, the Linux kernel can share memory pages that are identical and unchanged across all application instances. This also applies to shared libraries that applications may use, they are generally held in memory once and mapped to multiple processes. Quickly creating sandbox environments for development and testing purposes: containers that have been created and configured once can be archived as templates and can be duplicated (cloned) instantly on demand. After finishing the activity, the clone can safely be discarded. This allows to provide repeatable software builds and test environments, because the system will always be reset to its initial state for each run. Linux Containers also boot significantly faster than "classic" virtual machines, which can save a lot of time when running frequent build or test runs on applications. Safe execution of an individual application: if an application running inside a container has been compromised because of a security vulnerability, the host system and other containers remain unaffected. The potential damage can be minimized, analyzed and resolved directly from the host system. Note: Linux Containers on Oracle Linux 6 with the Unbreakable Enterprise Kernel Release 2 (2.6.39) are still marked as Technology Preview - their use is only recommended for testing and evaluation purposes. The Open-Source project "Linux Containers" (LXC) is driving the development of the technology behind this, which is based on the "Control Groups" (CGroups) and "Name Spaces" functionality of the Linux kernel. Oracle is actively involved in the Linux Containers development and contributes patches to the upstream LXC code base. Control Groups provide means to manage and monitor the allocation of resources for individual processes or process groups. Among other things, you can restrict the maximum amount of memory, CPU cycles as well as the disk and network throughput (in MB/s or IOP/s) that are available for an application. Name Spaces help to isolate process groups from each other, e.g. the visibility of other running processes or the exclusive access to a network device. It's also possible to restrict a process group's access and visibility of the entire file system hierarchy (similar to a classic "chroot" environment). CGroups and Name Spaces provide the foundation on which Linux containers are based on, but they can actually be used independently as well. A more detailed description of how Linux Containers can be created and managed on Oracle Linux will be explained in the second part of this article. Additional links related to Linux Containers: OTN Article: The Role of Oracle Solaris Zones and Linux Containers in a Virtualization Strategy Linux Containers on Wikipedia - Lenz Grimmer Follow me on: Personal Blog | Facebook | Twitter | Linux Blog |

  Read the article

• Why does DEP kill IE when accessing Microsoft FTP?

  - by Sammy

  I start up IE (9.0.8112.16421) with about:blank and I go to ftp://ftp.microsoft.com/ I press Alt, click View and then Open FTP Site in Windows Explorer. At this point IE stops responding and eventually crashes (though the window is still active, sometimes) and I get the usual Windows dialog box saying that the program has stopped working. From this dialog box I click on the option to try to find solutions to the problem and the progress bar just keeps scrolling without giving me any result page whatsoever, so I have to abort by clicking Cancel. Then I get the bubble type of pop-up message from the system tray saying that DEP has stopped the program from executing. What gives? Why would DEP (part of Microsoft Windows) be preventing IE (a Microsoft product) from performing a perfectly legitimate action from Microsoft's own FTP site? The OS is Windows Vista HP SP2, Swedish locale. Screenshots as follows... Update: I normally have UAC disabled, but I have discovered that enabling it has an effect on IE when I click the FTP option from the View menu, just as I suspected. I basically tried starting IE in its 32-bit and 64-bit version, with and without add-ons, and switching UAC on and off, and then trying to go to View and the FTP option (as shown above). Here are the results. With UAC off and DEP on Action: IE 32-bit, normal start, go to ftp://ftp.microsoft.com/, view menu, FTP option. Result: crash Action: IE 32-bit, extoff, go to ftp://ftp.microsoft.com/, view menu, FTP option. Result: crash Action: IE 64-bit, normal start, go to ftp://ftp.microsoft.com/, view menu, FTP option. Result: information & warning message Action: IE 64-bit, extoff, go to ftp://ftp.microsoft.com/, view menu, FTP option. Result: information & warning message This is the information and warning message I get if I use IE 64-bit: The first message is an FTP proxy warning. It says that the folder ftp://ftp.microsoft.com/ will be write-protected because proxy server is not configured to allow full access. It goes on to say that if I want to move, paste, change name or delete files I must use another type of proxy, and that I should contact the system admin for more information (the usual recommendation when they have no clue of what's going on). What the heck is all this about? I don't even use a proxy server, as you can see from the next screenshot (Internet Options, Connections, LAN settings dialog). That second message only states that the FTP site cannot be viewed in (Windows) Explorer. With UAC off, I always get these two messages when running the 64-bit version of IE. With UAC on and DEP on Action: IE 32-bit, normal start, go to ftp://ftp.microsoft.com/, view menu, FTP option. Result: crash Action: IE 32-bit, extoff, go to ftp://ftp.microsoft.com/, view menu, FTP option. Result: security warning message, prompts to allow action Action: IE 64-bit, normal start, go to ftp://ftp.microsoft.com/, view menu, FTP option. Result: security warning message, prompts to allow action Action: IE 64-bit, extoff, go to ftp://ftp.microsoft.com/, view menu, FTP option. Result: security warning message, prompts to allow action As you can see from this list, if I have UAC enabled I actually get rid of these messages and opening the FTP site in Windows Explorer (from IE) actually works (except for 32-bit version which still crashes). Here is the security warning message: The fact that the 32-bit IE still crashes could be an indicator that this has something to do with one or several add-ons in that bit-version of IE. The 32-bit IE doesn't crash if it's started with the extoff flag. If this is affecting only the 32-bit IE then it's only normal that the 64-bit IE doesn't have this problem because it would not be using any of the add-ons used by the 32-bit version, they are not compatible with 64-bit (although some add-ons work both with 32-bit and 64-bit IE). Figuring out which add-on (if any) is causing this problem is a whole new question... but I seem to be closer to an answer now, and a possible solution. I could of course just add IE (32-bit) in the exclusion list of DEP. In fact, I have already tested this and it causes IE to perform this task without hiccups. But I don't really want to disable DEP, or force it on all Windows programs and services (except the ones I strictly specify in the exception list). (In other words DEP can't really be completely disabled, you can only switch between two modes of operation.) Update 2: This is interesting... I start 32-bit IE, go to ftp://ftp.microsoft.com/ and click on View, and Open FTP Site in Windows Explorer. The result is a crash!! Then I start 32-bit IE with extoff flag to disable add-ons, I go to ftp://ftp.microsoft.com/ and click on View, and Open FTP Site in Windows Explorer. I get the security warning, as expected with UAC enabled, and it opens up in Windows Explorer. Now... I close Windows Explorer, and I close IE. I then start 32-bit IE (normal start, with add-ons), I go to ftp://ftp.microsoft.com/ and click on View, and Open FTP Site in Windows Explorer. Now this time it doesn't crash! Instead, I get the screenshot number 5 as seen above. This is the FTP proxy warning message. Now get this... if I click the close button to get rid of this message, what happens is that Firefox starts up, and it goes to ftp://ftp.microsoft.com/ The fact that this works with 32-bit IE (with add-ons) the second time around, is because I am still logged in as anonymous to the FTP server. The log-in has not timed out yet. Standard log-in timeout for FTP servers is usually 60 to 120 seconds. I got logged in to it the first time I ran 32-bit IE with the extoff flag (no add-ons) which actually works and connects using Windows Explorer. Update 3: The connection to the FTP server has timed out by now. So now if I run 32-bit IE (with add-ons) and repeat the steps as before it crashes, just as expected... In conclusion: If I have already been connected to the FTP server via Windows Explorer, and I go to this FTP address in 32-bit IE and I pick the FTP option from the view menu to open it in Windows Explorer, it gives me a FTP proxy server warning and then opens the address in default web browser (Firefox in my case). If I have not been connected to the FTP server via Windows Explorer previously, and I go to this FTP address in 32-bit IE and I pick the FTP option from the view menu top open it in Windows Explorer, then it crashes IE! This is just great... It's not that I care much for using Internet Explorer or the Windows Explorer to log in to FTP servers. This just shows why IE is not the best browser choice. This reminds me of the time when Microsoft was enforcing the use of Internet Explorer as default browser for opening web links and other web resources, despite the fact that the user had installed an alternative browser on the system. Even if the user explicitly set the default browser to be something else and not Internet Explorer in the Windows options, IE would still pop up sometimes, depending on what web resources the user was trying to access. Setting default browser had no effect. It was hard-coded that IE is the browser of choice, especially when accessing Microsoft product or help pages. The web page would actually say that you are not using IE, and that you must open it in IE to view it. Unfortunately you would not be able to open it manually in a different browser by simply copying and pasting the URL from the address bar, because it would show a different URL, and the original URL would re-direct to the "you are using the wrong browser" page so you would not have the time to cut it to clipboard. Thankfully those days are over. Now-days Microsoft is forced to distribute IE and WMP free versions of Windows for the EU market. The way it should be! These programs have to be optional, not mandatory.

  Read the article

• MySQL 5.5 is GA!

  - by rob.young(at)oracle.com

  It is my pleasure to announce that MySQL 5.5 is now GA and ready for production deployment.  You can read Oracle's official press release here. I am excited about 5.5 because of the performance and scalability gains, new replication enhancements and overall improved technical efficiencies.  Congratulations and a sincere "Thanks!" go out to the entire MySQL Community and product engineering teams for making 5.5 the best release of MySQL to date.Please join us for today's MySQL Technology Update webcast where Tomas Ulin and I will cover what's new in MySQL 5.5 and provide an update on the other technologies we are working on. You can download MySQL 5.5 here.  All of the documentation and what's new information is here.  There is also a great article on MySQL 5.5 and the MySQL community here.Thanks for reading, and as always, THANKS for your support of MySQL!

  Read the article

• Form, function and complexity in rule processing

  - by Charles Young

  Tim Bass posted on ‘Orwellian Event Processing’. I was involved in a heated exchange in the comments, and he has more recently published a post entitled ‘Disadvantages of Rule-Based Systems (Part 1)’. Whatever the rights and wrongs of our exchange, it clearly failed to generate any agreement or understanding of our different positions. I don't particularly want to promote further argument of that kind, but I do want to take the opportunity of offering a different perspective on rule-processing and an explanation of my comments. For me, the ‘red rag’ lay in Tim’s claim that “...rules alone are highly inefficient for most classes of (not simple) problems” and a later paragraph that appears to equate the simplicity of form (‘IF-THEN-ELSE’) with simplicity of function.   It is not the first time Tim has expressed these views and not the first time I have responded to his assertions.   Indeed, Tim has a long history of commenting on the subject of complex event processing (CEP) and, less often, rule processing in ‘robust’ terms, often asserting that very many other people’s opinions on this subject are mistaken.   In turn, I am of the opinion that, certainly in terms of rule processing, which is an area in which I have a specific interest and knowledge, he is often mistaken. There is no simple answer to the fundamental question ‘what is a rule?’ We use the word in a very fluid fashion in English. Likewise, the term ‘rule processing’, as used widely in IT, is equally difficult to define simplistically. The best way to envisage the term is as a ‘centre of gravity’ within a wider domain. That domain contains many other ‘centres of gravity’, including CEP, statistical analytics, neural networks, natural language processing and so much more. Whole communities tend to gravitate towards and build themselves around some of these centres. The term 'rule processing' is associated with many different technology types, various software products, different architectural patterns, the functional capability of many applications and services, etc. There is considerable variation amongst these different technologies, techniques and products. Very broadly, a common theme is their ability to manage certain types of processing and problem solving through declarative, or semi-declarative, statements of propositional logic bound to action-based consequences. It is generally important to be able to decouple these statements from other parts of an overall system or architecture so that they can be managed and deployed independently.  As a centre of gravity, ‘rule processing’ is no island. It exists in the context of a domain of discourse that is, itself, highly interconnected and continuous.   Rule processing does not, for example, exist in splendid isolation to natural language processing.   On the contrary, an on-going theme of rule processing is to find better ways to express rules in natural language and map these to executable forms.   Rule processing does not exist in splendid isolation to CEP.   On the contrary, an event processing agent can reasonably be considered as a rule engine (a theme in ‘Power of Events’ by David Luckham).   Rule processing does not live in splendid isolation to statistical approaches such as Bayesian analytics. On the contrary, rule processing and statistical analytics are highly synergistic.   Rule processing does not even live in splendid isolation to neural networks. For example, significant research has centred on finding ways to translate trained nets into explicit rule sets in order to support forms of validation and facilitate insight into the knowledge stored in those nets. What about simplicity of form?   Many rule processing technologies do indeed use a very simple form (‘If...Then’, ‘When...Do’, etc.)   However, it is a fundamental mistake to equate simplicity of form with simplicity of function.   It is absolutely mistaken to suggest that simplicity of form is a barrier to the efficient handling of complexity.   There are countless real-world examples which serve to disprove that notion.   Indeed, simplicity of form is often the key to handling complexity. Does rule processing offer a ‘one size fits all’. No, of course not.   No serious commentator suggests it does.   Does the design and management of large knowledge bases, expressed as rules, become difficult?   Yes, it can do, but that is true of any large knowledge base, regardless of the form in which knowledge is expressed.   The measure of complexity is not a function of rule set size or rule form.  It tends to be correlated more strongly with the size of the ‘problem space’ (‘search space’) which is something quite different.   Analysis of the problem space and the algorithms we use to search through that space are, of course, the very things we use to derive objective measures of the complexity of a given problem. This is basic computer science and common practice. Sailing a Dreadnaught through the sea of information technology and lobbing shells at some of the islands we encounter along the way does no one any good.   Building bridges and causeways between islands so that the inhabitants can collaborate in open discourse offers hope of real progress.

  Read the article

• Ops Center Solaris 11 IPS Repository Management: Using ISO Images

  - by S Stelting

  Please join us for a live WebEx presentation of this topic on Tuesday, November 20th at 9am MDT. Details for the call are provided below: https://oracleconferencing.webex.com/oracleconferencing/j.php?ED=209834017&UID=1512096072&PW=NYTVlZTYxMzdm&RT=MiMxMQ%3D%3D Meeting password: oracle123 Call-in toll-free number: 1-866-682-4770 International numbers: http://www.intercall.com/oracle/access_numbers.htm Conference Code: 762 9343 # Security Code: 7777 # With Enterprise Manager Ops Center 12c, you can provision, patch, monitor and manage Oracle Solaris 11 instances. To do this, Ops Center creates and maintains a Solaris 11 Image Packaging System (IPS) repository on the Enterprise Controller. During the Enterprise Controller configuration, you can load repository content directly from Oracle's Support Web site and subsequently synchronize the repository as new content becomes available. Of course, you can also use Solaris 11 ISO images to create and update your Ops Center repository. There are a few excellent reasons for doing this: You're running Ops Center in disconnected mode, and don't have Internet access on your Enterprise Controller You'd rather avoid the bandwidth associated with live synchronization of a Solaris 11 package repository This demo will show you how to use Solaris 11 ISO images to set up and update your Ops Center repository. Prerequisites This tip assumes that you've already installed the Enterprise Controller on a Solaris 11 OS instance and that you're ready for post-install configuration. In addition, there are specific Ops Center and OS version requirements depending on which version of Solaris 11 you plan to install.You can get full details about the requirements in the Release Notes for Ops Center 12c update 2. Additional information is available in the Ops Center update 2 Readme document. Part 1: Using a Solaris 11 ISO Image to Create an Ops Center Repository Step 1 – Download the Solaris 11 Repository Image The Oracle Web site provides a number of download links for official Solaris 11 images. Among those links is a two-part downloadable repository image, which provides repository content for Solaris 11 SPARC and X86 architectures. In this case, I used the Solaris 11 11/11 image. First, navigate to the Oracle Web site and accept the OTN License agreement: http://www.oracle.com/technetwork/server-storage/solaris11/downloads/index.html Next, download both parts of the Solaris 11 repository image. I recommend using the Solaris 11 11/11 image, and have provided the URLs here: http://download.oracle.com/otn/solaris/11/sol-11-1111-repo-full.iso-ahttp://download.oracle.com/otn/solaris/11/sol-11-1111-repo-full.iso-b Finally, use the cat command to generate an ISO image you can use to create your repository: # cat sol-11-1111-repo-full.iso-a sol-11-1111-repo-full.iso-b > sol-11-1111-repo-full.iso The process is very similar if you plan to set up a Solaris 11.1 release in Ops Center. In that case, navigate to the Solaris 11 download page, accept the license agreement and download both parts of the Solaris 11.1 repository image. Use the cat command to create a single ISO image for Solaris 11.1 Step 2 – Mount the Solaris 11 ISO Image in your Local Filesystem Once you have created the Solaris 11 ISO file, use the mount command to attach it to your local filesystem. After the image has been mounted, you can browse the repository from the ./repo subdirectory, and use the pkgrepo command to verify that Solaris 11 recognizes the content: Step 3 – Use the Image to Create your Ops Center Repository When you have confirmed the repository is available, you can use the image to create the Enterprise Controller repository. The operation will be slightly different depending on whether you configure Ops Center for Connected or Disconnected Mode operation.For connected mode operation, specify the mounted ./repo directory in step 4.1 of the configuration wizard, replacing the default Web-based URL. Since you're synchronizing from an OS repository image, you don't need to specify a key or certificate for the operation. For disconnected mode configuration, specify the Solaris 11 directory along with the path to the disconnected mode bundle downloaded by running the Ops Center harvester script: Ops Center will run a job to import package content from the mounted ISO image. A synchronization job can take several hours to run – in my case, the job ran for 3 hours, 22 minutes on a SunFire X4200 M2 server. During the job, Ops Center performs three important tasks: Synchronizes all content from the image and refreshes the repository Updates the IPS publisher information Creates OS Provisioning profiles and policies based on the content When the job is complete, you can unmount the ISO image from your Enterprise Controller. At that time, you can view the repository contents in your Ops Center Solaris 11 library. For the Solaris 11 11/11 release, you should see 8,668 packages and patches in the contents. You should also see default deployment plans for Solaris 11 provisioning. As part of the repository import, Ops Center generates plans and profiles for desktop, small and large servers for the SPARC and X86 architecture. Part 2: Using a Solaris 11 SRU to update an Ops Center Repository It's possible to use the same approach to upgrade your Ops Center repository to a Solaris 11 Support Repository Update, or SRU. Each SRU provides packages and updates to Solaris 11 - for example, SRU 8.5 provided the packaged for Oracle VM Server for SPARC 2.2 SRUs are available for download as ISO images from My Oracle Support, under document ID 1372094.1. The document provides download links for all SRUs which have been released by Oracle for Solaris 11. SRUs are cumulative, so later versions include the packages from earlier SRUs. After downloading an ISO image for an SRU, you can mount it to your local filesystem using a mount command similar to the one shown for Solaris 11 11/11. When the ISO image is mounted to the file system, you can perform the Add Content action from the Solaris 11 Library to synchronize packages and patches from the mounted image. I used the same mount point, so the repository URL was file://mnt/repo once again: After the synchronization of an SRU is complete, you can verify its content in the Solaris 11 library using the search function. The version pattern is 0.175.0.#, where the # is the same value as the SRU. In this example, I upgraded to SRU 1. The update job ran in just under 8 minutes, and a quick search shows that 22 software components were added to the repository: It's also possible to search for "Support Repository Update" to confirm the SRU was successfully added to the repository. Details on any of the update content are available by clicking the "View Details" button under the Packages/Patches entry.

  Read the article

• Windows CE Chat March 30, 2010

  - by Bruce Eitman

  Another great opportunity to ask Microsoft engineers your technical questions is coming up on Tuesday, March 30th.  These chats are your opportunity to get advice and answers from the engineers at Microsoft.   You may want to review the transcript from last month to get an idea about what kind of topics are discussed. Title:    Windows CE Live Chat! When:  Tuesday, March 30, 2010 9:00 - 10:00 A.M. Pacific Time   Add to Calendar Description: Do you have tough technical questions regarding Windows CE or Windows Mobile for which you're seeking answers? Do you want to tap into the deep knowledge of the talented Microsoft Embedded Devices Group members? If so, please join us for a live Windows CE chat and bring on the questions! Windows CE is the operating system that is powering the next generation of 32-bit, small-footprint and mobile devices. This chat will cover the tools and technologies used to develop devices using the Windows CE operating system. To join this chat, please log on via the main MSDN chat page at: EnterChatRoom   Copyright © 2010 – Bruce Eitman All Rights Reserved

  Read the article

• Rob Blackwell on interoperability and Azure

  - by Eric Nelson

  At QCon in March we had a sample Azure application implemented in both Java and Ruby to demonstrate that the Windows Azure Platform is not just about .NET. The following is an interesting interview with Rob Blackwell, the R&D director of the partner who implemented the application. UK Interoperability Team Interviews Rob Blackwell, R&D Director at Active Web Solutions. Is Microsoft taking interoperability seriously? Yes. In the past, I think Microsoft has, quite rightly come in for criticism, but architects and developers should look at this again. The Interoperability Bridges site (http://www.interoperabilitybridges.com/ ) shows a wide range of projects that allow interoperability from Java, Ruby and PHP for example. The Windows Azure platform has been architected with interoperable APIs in mind. It's straightforward to access the various storage facilities from just about any language or platform. Azure compute is capable of running more than just C# applications! Why is interoperability important to you? My company provides consultancy and bespoke development services. We're a Microsoft Gold Partner, but we live in the real world where companies have a mix of technologies provided by a variety of vendors. When developing an enterprise software solution, you rarely have a completely blank canvas. We often see integration scenarios where we need to exchange data with legacy systems. It's not unusual to see modern Silverlight applications being built on top of Java or Mainframe based back ends. Could you give us some examples of where interoperability has been important for your projects? We developed an innovative Sea Safety system for the RNLI Lifeboats here in the UK. Commercial Fishing is one of the most dangerous professions and we helped developed the MOB Guardian System which uses satellite technology and man overboard devices to raise the alarm when a fisherman gets into trouble. The solution is implemented in .NET running on Windows, but without interoperable standards, it would have been impossible to communicate with the satellite gateway technology. For more information, please see the case study: http://www.microsoft.com/casestudies/Case_Study_Detail.aspx?CaseStudyID=4000005892 More recently, we were asked to build a web site to accompany the QCon 2010 conference in London to help demonstrate and promote interoperability. We built the site using Java and Restlet and hosted it in Windows Azure Compute. The site accepts feedback from visitors and all the data is stored in Windows Azure Storage. We also ported the application to Ruby on Rails for demonstration purposes. Visitors to the stand were surprised that this was even possible. Why should Java developers be interested in Windows Azure? Windows Azure Storage consists of Blobs, Queues and Tables. The storage is scalable, durable, secure and cost-effective. Using the WindowsAzure4j library, it's easy to use, and takes just a few lines of code. If you are writing an application with large data storage requirements, or you want an offsite backup, it makes a lot of sense. Running Java applications in Azure Compute is straightforward with tools like the Tomcat Solution Accelerator (http://code.msdn.microsoft.com/winazuretomcat )and AzureRunMe (http://azurerunme.codeplex.com/ ). The Windows Azure AppFabric Service Bus can also be used to connect heterogeneous systems running on different networks and in different data centres. How can The Service Bus be considered an interoperability solution? I think that the Windows Azure AppFabric Service Bus is one of Microsoft’s best kept secrets. Think of it as “a globally scalable application plumbing kit in the sky”. If you have used Enterprise Service Buses before, you’ll be familiar with the concept. Applications can connect to the service bus to securely exchange data – these can be point to point or multicast links. With the AppFabric Service Bus, the applications can exist anywhere that has access to the Internet and the connections can traverse firewalls. This makes it easy to extend or scale your application or reach out to other networks and technologies. For example, let’s say you have a SQL Server database running on premises and you want to expose the data to a Java application running in the cloud. You could set up a point to point Service Bus connection and use JDBC. Traditionally this would have been difficult or impossible without punching holes in firewalls and compromising security. Rob Blackwell is R&D Director at Active Web Solutions, www.aws.net , a Microsoft Gold Partner specialising in leading edge software solutions. He is an occasional writer and conference speaker and blogs at www.robblackwell.org.uk Related Links: UK Azure Online Community – join today. UK Windows Azure Site Start working with Windows Azure

  Read the article

• Confluence or apache on win server 2008 cant find scripts and images :(

  - by Ishak

  I am a newbie to both Tomcat and Apache. I have set the virtual hosts as described in Here. And JIRA works fine when i browse the URL jira.agmlab.com. However when i try to access Confluence(3.4.5) with confluence.agmlab.com the pages come in plain html, i can login and browse pages but there is no css or js so that my confluence pages look very ugly. what can possibly cause this and how to fix this? here is my virtual hosts definitions : # # Virtual Hosts # # If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs/2.2/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # Use name-based virtual hosting. # NameVirtualHost * # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. # <VirtualHost *> ServerName confluence.agmlab.com ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8081/confluence/ ProxyPassReverse / http://localhost:8081/confluence/ # ProxyHTMLURLMap /confluence/ / <Location /> Order allow,deny Allow from all </Location> </VirtualHost> <VirtualHost *> ServerName jira.agmlab.com ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8080/ ProxyPassReverse / http://localhost:8080/ <Location /> Order allow,deny Allow from all </Location> </VirtualHost> and i added 127.0.0.1 jira.agmlab.com 127.0.0.1 confluence.agmlab.com to my hosts file (i am using Win Server 2008 OS). here is part of the error log from Apache access.log file : 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1.0/_/download/resources/confluence.web.resources:aui-forms/confluence-forms.css HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/3.4.5/_/download/batch/com.atlassian.confluence.keyboardshortcuts:confluence-keyboard-shortcuts/com.atlassian.confluence.keyboardshortcuts:confluence-keyboard-shortcuts.css HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/0.7/_/download/batch/com.atlassian.plugins.shortcuts.atlassian-shortcuts-module:shortcuts/com.atlassian.plugins.shortcuts.atlassian-shortcuts-module:shortcuts.css HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1/_/download/superbatch/js/batch.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1.0/_/download/batch/confluence.web.resources:login/confluence.web.resources:login.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1/_/download/superbatch/css/batch.css?media=print HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1/_/styles/combined.css HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1.2.2/_/download/batch/com.atlassian.confluence.plugins.doctheme:splitter/com.atlassian.confluence.plugins.doctheme:splitter.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1.0/_/download/batch/legacy.confluence.web.resources:prototype/legacy.confluence.web.resources:prototype.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/0.7/_/download/batch/com.atlassian.plugins.shortcuts.atlassian-shortcuts-module:shortcuts/com.atlassian.plugins.shortcuts.atlassian-shortcuts-module:shortcuts.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/3.4.5/_/download/batch/com.atlassian.confluence.keyboardshortcuts:confluence-keyboard-shortcuts/com.atlassian.confluence.keyboardshortcuts:confluence-keyboard-shortcuts.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/images/logo/confluence_48_white.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/opensearch/osd.action HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/_/images/logo/confluence_16.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:16:27 +0200] "POST /plugins/servlet/gadgets/security-tokens HTTP/1.1" 200 525 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/favicon.ico HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/s/2035/1/_/images/logo/confluence_16.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/s/2035/1/_/images/icons/profilepics/anonymous.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/images/logo/confluence_48_white.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/images/icons/star_grey.gif HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/s/2035/1/_/images/icons/add_12.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/images/border/spacer.gif HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:11 +0200] "GET /confluence/favicon.ico HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:11 +0200] "GET /confluence/s/2035/1/_/images/logo/confluence_16.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/s/2035/1/_/images/icons/add_12.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/s/2035/1/_/images/icons/profilepics/anonymous.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/images/logo/confluence_48_white.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/images/border/spacer.gif HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/images/icons/star_grey.gif HTTP/1.1" 404 2788 I can see the pages properly with js and css and images when i use confluence with URL localhost:8081/confluence. i have just set the base url of confluence to "confluence.agmlab.com" and then restarted both confluence and apache but nothing changed, and i also checked settings for jira, and its base URL is localhost:8080 but it works fine. Can it be something related with the permissions defined in Win Server 2008 ? maybe there is not enough rights (such as read execute ) in some users, directories ??

  Read the article

• Connecting to Microsoft Excel using Oracle Data Integrator

  - by julien.testut

  The posts in this series assume that you have some level of familiarity with ODI. The concepts of Topology, Data Server, Physical and Logical Architecture are used here assuming that you understand them in the context of ODI. If you need more details on these elements, please refer to the ODI Tutorial for a quick introduction, or to the complete ODI documentation for more details. In this post I will describe how a Microsoft Excel spreadsheet can be used in Oracle Data Integrator. Microsoft Excel is one of the many different technologies you can leverage in ODI as a source or as a target. Prepare your Excel spreadsheet Prior to using a Microsoft Excel spreadsheet in ODI we need to specify a name for the different cell tables we want to use. You can have multiple names in the same spreadsheet. First open up a Microsoft Excel spreadsheet, we will need to define a named range.

  Read the article

• Using Teleriks new LINQ implementation to create OData feeds

  This week Telerik released a new LINQ implementation that is simple to use and produces domain models very fast. Built on top of the enterprise grade OpenAccess ORM, you can connect to any database that OpenAccess can connect to such as: SQL Server, MySQL, Oracle, SQL Azure, VistaDB, etc. While this is a separate LINQ implementation from traditional OpenAccess Entites, you can use the visual designer without ever interacting with OpenAccess, however, you can always hook into the advanced ORM features like caching, fetch plan optimization, etc, if needed. Just to show off how easy our LINQ implementation is to use, I will walk you through building an OData feed using Data Services Update for .NET Framework 3.5 SP1. (Memo to Microsoft: P-L-E-A-S-E hire someone from Apple to name your products.) How easy is it? If you have a fast machine, are skilled with the mouse, and type fast, you can do this in about 60 seconds via three easy steps. (I promise in about 2-3 weeks that you can do this in less then 30 seconds. Stay tuned for that.)  Step 1 (15-20 seconds): Building your Domain Model In your web project in Visual Studio, right click on the project and select Add|New Item and select Telerik OpenAccess Domain Model as your item template. Give the file a meaningful name as well. Select your database type (SQL Server, SQL Azure, Oracle, MySQL, VistaDB, etc) and build the connection string. If you already have a Visual Studio connection string already saved, this step is trivial.  Then select your tables, enter a name for your model and click Finish. In this case I connected to Northwind and selected only Customers, Orders, and Order Details.  I named my model NorthwindEntities and will use that in my DataService. Step 2 (20-25 seconds): Adding and Configuring your Data Service In your web project in Visual Studio, right click on the project and select Add|New Item and select ADO .NET Data Service as your item template and name your service. In the code behind for your Data Service you have to make three small changes. Add the name of your Telerik Domain Model (entered in Step 1) as the DataService name (shown on line 6 below as NorthwindEntities) and uncomment line 11 and add a * to show all entities. Optionally if you want to take advantage of the DataService 3.5 updates, add line 13 (and change IDataServiceConfiguration to DataServiceConfiguration in line 9.) 1: using System.Data.Services; 2: using System.Data.Services.Common; 3:   4: namespace Telerik.RLINQ.Astoria.Web 5: { 6: public class NorthwindService : DataService<NorthwindEntities> 7: { 8: //change the IDataServiceConfigurationto DataServiceConfiguration 9: public static void InitializeService(DataServiceConfiguration config) 10: { 11: config.SetEntitySetAccessRule("*", EntitySetRights.All); 12: //take advantage of the "Astoria3.5 Update" features 13: config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; 14: } 15: } 16: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   Step 3 (~30 seconds): Adding the DataServiceKeys You now have to tell your data service what are the primary keys of each entity. To do this you have to create a new code file and create a few partial classes. If you type fast, use copy and paste from your first entity,  and use a refactoring productivity tool, you can add these 6-8 lines of code or so in about 30 seconds. This is the most tedious step, but dont worry, Ive bribed some of the developers and our next update will eliminate this step completely. Just create a partial class for each entity you have mapped and add the attribute [DataServiceKey] on top of it along with the keys field name. If you have any complex properties, you will need to make them a primitive type, as I do in line 15. Create this as a separate file, dont manipulate the generated data access classes in case you want to regenerate them again later (even thought that would be much faster.) 1: using System.Data.Services.Common; 2:   3: namespace Telerik.RLINQ.Astoria.Web 4: { 5: [DataServiceKey("CustomerID")] 6: public partial class Customer 7: { 8: } 9:   10: [DataServiceKey("OrderID")] 11: public partial class Order 12: { 13: } 14:   15: [DataServiceKey(new string[] { "OrderID", "ProductID" })] 16: public partial class OrderDetail 17: { 18: } 19:   20: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   Done! Time to run the service. Now, lets run the service! Select the svc file and right click and say View in Browser. You will see your OData service and can interact with it in the browser. Now that you have an OData service set up, you can consume it in one of the many ways that OData is consumed: using LINQ, the Silverlight OData client, Excel PowerPivot, or PhP, etc. Happy Data Servicing! Technorati Tags: Telerik,Astoria,Data Services Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Routing Issue in ASP.NET MVC 3 RC 2

  - by imran_ku07

       Introduction:             Two weeks ago, ASP.NET MVC team shipped the ASP.NET MVC 3 RC 2 release. This release includes some new features and some performance optimization. This release also fixes most of the bugs but still some minor issues are present in this release. Some of these issues are already discussed by Scott Guthrie at Update on ASP.NET MVC 3 RC2 (and a workaround for a bug in it). In addition to these issues, I have found another issue in this release regarding routing. In this article, I will show you the issue regarding routing and a simple workaround for this issue.       Description:             The easiest way to understand an issue is to reproduce it in the application. So create a MVC 2 application and a MVC 3 RC 2 application. Then in both applications, just open global.asax file and update the default route as below,     routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapRoute( "Default", // Route name "{controller}/{action}/{id1}/{id2}", // URL with parameters new { controller = "Home", action = "Index", id1 = UrlParameter.Optional, id2 = UrlParameter.Optional } // Parameter defaults );              Then just open Index View and add the following lines,    <%@ Page Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage" %> <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> Home Page </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <% Html.RenderAction("About"); %> </asp:Content>             The above view will issue a child request to About action method. Now run both applications. ASP.NET MVC 2 application will run just fine. But ASP.NET MVC 3 RC 2 application will throw an exception as shown below,                  You may think that this is a routing issue but this is not the case here as both ASP.NET MVC 2 and ASP.NET MVC  3 RC 2 applications(created above) are built with .NET Framework 4.0 and both will use the same routing defined in System.Web. Something is wrong in ASP.NET MVC 3 RC 2. So after digging into ASP.NET MVC source code, I have found that the UrlParameter class in ASP.NET MVC 3 RC 2 overrides the ToString method which simply return an empty string.     public sealed class UrlParameter { public static readonly UrlParameter Optional = new UrlParameter(); private UrlParameter() { } public override string ToString() { return string.Empty; } }             In MVC 2 the ToString method was not overridden. So to quickly fix the above problem just replace UrlParameter.Optional default value with a different value other than null or empty(for example, a single white space) or replace UrlParameter.Optional default value with a new class object containing the same code as UrlParameter class have except the ToString method is not overridden (or with a overridden ToString method that return a string value other than null or empty). But by doing this you will loose the benefit of ASP.NET MVC 2 Optional URL Parameters. There may be many different ways to fix the above problem and not loose the benefit of optional parameters. Here I will create a new class MyUrlParameter with the same code as UrlParameter class have except the ToString method is not overridden. Then I will create a base controller class which contains a constructor to remove all MyUrlParameter route data parameters, same like ASP.NET MVC doing with UrlParameter route data parameters early in the request.     public class BaseController : Controller { public BaseController() { if (System.Web.HttpContext.Current.CurrentHandler is MvcHandler) { RouteValueDictionary rvd = ((MvcHandler)System.Web.HttpContext.Current.CurrentHandler).RequestContext.RouteData.Values; string[] matchingKeys = (from entry in rvd where entry.Value == MyUrlParameter.Optional select entry.Key).ToArray(); foreach (string key in matchingKeys) { rvd.Remove(key); } } } } public class HomeController : BaseController { public ActionResult Index(string id1) { ViewBag.Message = "Welcome to ASP.NET MVC!"; return View(); } public ActionResult About() { return Content("Child Request Contents"); } }     public sealed class MyUrlParameter { public static readonly MyUrlParameter Optional = new MyUrlParameter(); private MyUrlParameter() { } }     routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); routes.MapRoute( "Default", // Route name "{controller}/{action}/{id1}/{id2}", // URL with parameters new { controller = "Home", action = "Index", id1 = MyUrlParameter.Optional, id2 = MyUrlParameter.Optional } // Parameter defaults );             MyUrlParameter class is a copy of UrlParameter class except that MyUrlParameter class not overrides the ToString method. Note that the default route is modified to use MyUrlParameter.Optional instead of UrlParameter.Optional. Also note that BaseController class constructor is removing MyUrlParameter parameters from the current request route data so that the model binder will not bind these parameters with action method parameters. Now just run the ASP.NET MVC 3 RC 2 application again, you will find that it runs just fine.             In case if you are curious to know that why ASP.NET MVC 3 RC 2 application throws an exception if UrlParameter class contains a ToString method which returns an empty string, then you need to know something about a feature of routing for url generation. During url generation, routing will call the ParsedRoute.Bind method internally. This method includes a logic to match the route and build the url. During building the url, ParsedRoute.Bind method will call the ToString method of the route values(in our case this will call the UrlParameter.ToString method) and then append the returned value into url. This method includes a logic after appending the returned value into url that if two continuous returned values are empty then don't match the current route otherwise an incorrect url will be generated. Here is the snippet from ParsedRoute.Bind method which will prove this statement.       if ((builder2.Length > 0) && (builder2[builder2.Length - 1] == '/')) { return null; } builder2.Append("/"); ........................................................... ........................................................... ........................................................... ........................................................... if (RoutePartsEqual(obj3, obj4)) { builder2.Append(UrlEncode(Convert.ToString(obj3, CultureInfo.InvariantCulture))); continue; }             In the above example, both id1 and id2 parameters default values are set to UrlParameter object and UrlParameter class include a ToString method that returns an empty string. That's why this route will not matched.            Summary:             In this article I showed you the issue regarding routing and also showed you how to workaround this problem. I explained this issue with an example by creating a ASP.NET MVC 2 and a ASP.NET MVC 3 RC 2 application. Finally I also explained the reason for this issue. Hopefully you will enjoy this article too.   SyntaxHighlighter.all()

  Read the article

• JMX Based Monitoring - Part Four - Business App Server Monitoring

  - by Anthony Shorten

  In the last blog entry I talked about the Oracle Utilities Application Framework V4 feature for monitoring and managing aspects of the Web Application Server using JMX. In this blog entry I am going to discuss a similar new feature that allows JMX to be used for management and monitoring the Oracle Utilities business application server component. This feature is primarily focussed on performance tracking of the product. In first release of Oracle Utilities Customer Care And Billing (V1.x I am talking about), we used to use Oracle Tuxedo as part of the architecture. In Oracle Utilities Application Framework V2.0 and above, we removed Tuxedo from the architecture. One of the features that some customers used within Tuxedo was the performance tracking ability. The idea was that you enabled performance logging on the individual Tuxedo servers and then used a utility named txrpt to produce a performance report. This report would list every service called, the number of times it was called and the average response time. When I worked a performance consultant, I used this report to identify badly performing services and also gauge the overall performance characteristics of a site. When Tuxedo was removed from the architecture this information was also lost. While you can get some information from access.log and some Mbeans supplied by the Web Application Server it was not at the same granularity as txrpt or as useful. I am happy to say we have not only reintroduced this facility in Oracle Utilities Application Framework but it is now accessible via JMX and also we have added more detail into the performance tracking. Most of this new design was working with customers around the world to make sure we introduced a new feature that not only satisfied their performance tracking needs but allowed for finer grained performance analysis. As with the Web Application Server, the Business Application Server JMX monitoring is enabled by specifying a JMX port number in RMI Port number for JMX Business and initial credentials in the JMX Enablement System User ID and JMX Enablement System Password configuration options. These options are available using the configureEnv[.sh] -a utility. These credentials are shared across the Web Application Server and Business Application Server for authorization purposes. Once this is information is supplied a number of configuration files are built (by the initialSetup[.sh] utility) to configure the facility: spl.properties - contains the JMX URL, the security configuration and the mbeans that are enabled. For example, on my demonstration machine: spl.runtime.management.rmi.port=6750 spl.runtime.management.connector.url.default=service:jmx:rmi:///jndi/rmi://localhost:6750/oracle/ouaf/ejbAppConnector jmx.remote.x.password.file=scripts/ouaf.jmx.password.file jmx.remote.x.access.file=scripts/ouaf.jmx.access.file ouaf.jmx.com.splwg.ejb.service.management.PerformanceStatistics=enabled ouaf.jmx.* files - contain the userid and password. The default configuration uses the JMX default configuration. You can use additional security features by altering the spl.properties file manually or using a custom template. For more security options see JMX Security for more details. Once it has been configured and the changes reflected in the product using the initialSetup[.sh] utility the JMX facility can be used. For illustrative purposes I will use jconsole but any JSR160 complaint browser or client can be used (with the appropriate configuration). Once you start jconsole (ensure that splenviron[.sh] is executed prior to execution to set the environment variables or for remote connection, ensure java is in your path and jconsole.jar in your classpath) you specify the URL in the spl.runtime.management.connnector.url.default entry. For example: You are then able to track performance of the product using the PerformanceStatistics Mbean. The attributes of the PerformanceStatistics Mbean are counts of each object type. This is where this facility differs from txrpt. The information that is collected includes the following: The Service Type is captured so you can filter the results in terms of the type of service. For maintenance type services you can even see the transaction type (ADD, CHANGE etc) so you can see the performance of updates against read transactions. The Minimum and Maximum are also collected to give you an idea of the spread of performance. The last call is recorded. The date, time and user of the last call are recorded to give you an idea of the timeliness of the data. The Mbean maintains a set of counters per Service Type to give you a summary of the types of transactions being executed. This gives you an overall picture of the types of transactions and volumes at your site. There are a number of interesting operations that can also be performed: reset - This resets the statistics back to zero. This is an important operation. For example, txrpt is restricted to collecting statistics per hour, which is ok for most people. But what if you wanted to be more granular? This operation allows to set the collection period to anything you wish. The statistics collected will represent values since the last restart or last reset. completeExecutionDump - This is the operation that produces a CSV in memory to allow extraction of the data. All the statistics are extracted (see the Server Administration Guide for a full list). This can be then loaded into a database, a tool or simply into your favourite spreadsheet for analysis. Here is an extract of an execution dump from my demonstration environment to give you an idea of the format: ServiceName, ServiceType, MinTime, MaxTime, Avg Time, # of Calls, Latest Time, Latest Date, Latest User ... CFLZLOUL, EXECUTE_LIST, 15.0, 64.0, 22.2, 10, 16.0, 2009-12-16::11-25-36-932, ASHORTEN CILBBLLP, READ, 106.0, 1184.0, 466.3333333333333, 6, 106.0, 2009-12-16::11-39-01-645, BOBAMA CILBBLLP, DELETE, 70.0, 146.0, 108.0, 2, 70.0, 2009-12-15::12-53-58-280, BPAYS CILBBLLP, ADD, 860.0, 4903.0, 2243.5, 8, 860.0, 2009-12-16::17-54-23-862, LELLISON CILBBLLP, CHANGE, 112.0, 3410.0, 815.1666666666666, 12, 112.0, 2009-12-16::11-40-01-103, ASHORTEN CILBCBAL, EXECUTE_LIST, 8.0, 84.0, 26.0, 22, 23.0, 2009-12-16::17-54-01-643, LJACKMAN InitializeUserInfoService, READ_SYSTEM, 49.0, 962.0, 70.83777777777777, 450, 63.0, 2010-02-25::11-21-21-667, ASHORTEN InitializeUserService, READ_SYSTEM, 130.0, 2835.0, 234.85777777777778, 450, 216.0, 2010-02-25::11-21-21-446, ASHORTEN MenuLoginService, READ_SYSTEM, 530.0, 1186.0, 703.3333333333334, 9, 530.0, 2009-12-16::16-39-31-172, ASHORTEN NavigationOptionDescriptionService, READ_SYSTEM, 2.0, 7.0, 4.0, 8, 2.0, 2009-12-21::09-46-46-892, ASHORTEN ... There are other operations and attributes available. Refer to the Server Administration Guide provided with your product to understand the full et of operations and attributes. This is one of the many features I am proud that we implemented as it allows flexible monitoring of the performance of the product.

  Read the article

• You are probably NOT a SharePoint Development Expert if&hellip;

  - by Mark Rackley

  So, all you aspiring SharePoint experts out there (especially those of you who put “expert” in your resumes).  It’s time for a cold cool splash of reality. More than likely you are NOT an expert (I know I’m not). Yes, you may have some expertise in certain aspects in SharePoint (it’s questionable if I have THAT some days), but make sure you’ve got the basics down before you start throwing that word “expert” around. I know that it becomes frustrating to those looking to hire SharePoint people and having to sift through all the resumes of those who think very highly of themselves and their skills only to find those gaping holes in common best practices. I’m much more willing to hire a decent dev who KNOWS they are not an expert than to hire a decent+ dev who THINKS they are an expert.  So… I’ve compiled a small reality check for you SharePoint Devs. and a “red flag” check for those of you wishing to hire a SharePoint developer. If any of these apply to you, you are probably not a SharePoint Development Expert. You are not a SharePoint Development Expert if you manually copy your DLLs Seriously, I don’t care if you write the best code in the world. If you are manually copying files to each web front end you are NOT a SharePoint Development expert. Yes, I realize the admins are generally the ones who do the actual deployments, but if you don’t know how to create solution packages for your admins, you are going to end up doing more damage than good some day. There are TONS of tools out there to help generate deployable solutions for you. You have ZERO excuse. You are not a SharePoint Development expert if you can’t tell me the main artifacts of a solution package Directly related to the first one. If you don’t know what the Manifest, DDF, WSP, and Feature files are and how they are used in a solution package, you are NOT a SharePoint development expert. I’m not asking you to be able to write them all from scratch (heck, I can’t even do that), but you MUST know what they are and how to tweak them if necessary. You are not a SharePoint Development expert if you don’t know what a Content Type or a Site Column is You would be absolutely amazed at how many “Expert” SharePoint Developers have NEVER EVER created a Content Type or Site Column or even know what they are. I mean, why would you ever want to create those when you can just do everything as a custom list or custom field? right???? (that’s sarcasm). You also need to know how to package a Content Type and a Site Column into a deployable package by the way. You are not a SharePoint Development expert if you have not created at least one Web Part, Workflow, Timer Job, and Event Handler. If you haven’t written at least one of each, you don’t fully understand what they do or their limitations. Again, I expect NO ONE to be able to write these things blind. I think the last time I wrote an application from scratch without copying and pasting from another project I had done before was back in 1994? Seriously, coding is like a Sour Dough starter, you get it from someone else and keep adding to it. You are not a SharePoint Development expert if you don’t know how to properly dispose of objects Another biggie with zero excuse for getting it wrong. It is so well known that you must dispose of your SPWeb and SPSite objects that if you aren’t doing it then you are not an expert. Heck, if you utilize “using” when handling SPWeb and SPSite objects and don’t realize that it disposes of those objects for you, then you are not a SharePoint Development expert. You are not a SharePoint Development expert if you do not know how to properly elevate privileges Just one of those development basics that any decent SharePoint Developer has got to have down and understand how and why it’s used You are not a SharePoint Development expert if you don’t know all of the development options available to SharePoint and when they should be used Okay… so all you hard core .NET SharePoint dev geeks take a moment to listen. You may be the most top not SharePoint .NET developer in the world, but if you are opening Visual Studio to solve every problem in SharePoint, then you are NOT a SharePoint development expert. The SharePoint developer’s tool kit is growing every day with tools like Visual Studio, Data View Web Parts, XSL, jQuery, SPServices, etc. etc… If you don’t have the ability to at least recognize that “hey, you can basically do the same thing here but just dropping in Easy Tabs instead of writing some weird web part” then you are NOT a SharePoint Development expert AND you are doing a huge disservice to your clients and customers. You are probably NOT a SharePoint Development expert if you call yourself an Expert So, truth telling time. I’m not an expert. There, I said it. I feel so much better. Now, I realize the word “expert” has been used with my name before, but I am quick to point out that I KNOW the experts and know that they will help me if I need it, but I’m not an expert in all things SharePoint. The minute you take on that moniker you are setting yourself up for a fall. It’s too big, there’s too much to know, and there’s WAY too much you can do wrong. You are not a SharePoint Development expert if you are not involved in the community I expect to get the most flack for this one, but it’s always a huge red flag for me when someone says they are an expert and has ZERO knowledge of the SharePoint community. The SharePoint community is ABSOLUTELY CRITICAL to be an effective SharePoint developer, admin, architect, power user or whatever the heck you are!! The community keeps you sane, tells you when you are NOT using a best practice, recommends the best practice, and even knows when Microsoft is giving you the wrong information (*gasp* it does happen). If you can’t tell me who you are following on twitter, who's blog you read, what conferences you attend, or name the experts who you monitor to make sure you are not doing something stupid, then you are probably doing something stupid. Again, not asking you to be a speaker, blogger, or the least bit extroverted but you should be at LEAST stalking the experts. So… what’s the point? So… yeah… what’s my point in all this. Well, first of all let me point out that this is by far not a finished list and I could come up with a LOT more specific “deep dive” questions, but these should be high enough level that even non experts can recognize and ask them. If you have some common ones you run into let me know and add them in the comments below. Also, keep in mind I’m not saying you as a developer HAVE to know EVERYTHING, but you DO need to know what you don’t know and proudly and honestly state “I don’t know, but I’ll learn and find out”.  Those of us hiring SharePoint developers and know and have a passion for SharePoint are not looking for that elusive “expert” who knows everything. We are looking for someone who “gets it”, has a similar passion, great attitude, an understanding that they DON’T know everything, and a desire to do it right.  I would bet money that most SharePoint development disasters happen because of “experts” who think they know everything rather than the developer who is cautious and knows he doesn’t. Lastly, I know there’s a raging debate over what a “SharePoint Developer” is (I should know, as I keep bringing it up). So, obviously this blog post is more closely tied to the .NET side of SharePoint development and less towards the client side, middle tier, or whatever you want to call it. So, let’s please not get that argument going here as well…  Thanks

  Read the article

• Software Architecture: Quality Attributes

  Quality is what all software engineers should strive for when building a new system or adding new functionality. Dictonary.com ambiguously defines quality as a grade of excellence. Unfortunately, quality must be defined within the context of a situation in that each engineer must extract quality attributes from a project’s requirements. Because quality is defined by project requirements the meaning of quality is constantly changing base on the project. Software architecture factors that indicate the relevance and effectiveness The relevance and effectiveness of architecture can vary based on the context in which it was conceived and the quality attributes that are required to meet. Typically when evaluating architecture for a specific system regarding relevance and effectiveness the following questions should be asked.   Architectural relevance and effectiveness questions: Does the architectural concept meet the needs of the system for which it was designed? Out of the competing architectures for a system, which one is the most suitable? If we look at the first question regarding meeting the needs of a system for which it was designed. A system that answers yes to this question must meet all of its quality goals. This means that it consistently meets or exceeds performance goals for the system. In addition, the system meets all the other required system attributers based on the systems requirements. The suitability of a system is based on several factors. In order for a project to be suitable the necessary resources must be available to complete the task. Standard Project Resources: Money Trained Staff Time Life cycle factors that affect the system and design The development life cycle used on a project can drastically affect how a system’s architecture is created as well as influence its design. In the case of using the software development life cycle (SDLC) each phase must be completed before the next can begin.  This waterfall approach does not allow for changes in a system’s architecture after that phase is completed. This can lead to major system issues when the architecture for the system is not as optimal because of missed quality attributes. This can occur when a project has poor requirements and makes misguided architectural decisions to name a few examples. Once the architectural phase is complete the concepts established in this phase must move on to the design phase that is bound to use the concepts and guidelines defined in the previous phase regardless of any missing quality attributes needed for the project. If any issues arise during this phase regarding the selected architectural concepts they cannot be corrected during the current project. This directly has an effect on the design of a system because the proper qualities required for the project where not used when the architectural concepts were approved. When this is identified nothing can be done to fix the architectural issues and system design must use the existing architectural concepts regardless of its missing quality properties because the architectural concepts for the project cannot be altered. The decisions made in the design phase then preceded to fall down to the implementation phase where the actual system is coded based on the approved architectural concepts established in the architecture phase regardless of its architectural quality. Conversely projects using more of an iterative or agile methodology to implement a system has more flexibility to correct architectural decisions based on missing quality attributes. This is due to each phase of the SDLC is executed more than once so any issues identified in architecture of a system can be corrected in the next architectural phase. Subsequently the corresponding changes will then be adjusted in the following design phase so that when the project is completed the optimal architectural and design decision are applied to the solution. Architecture factors that indicate functional suitability Systems that have function shortcomings do not have the proper functionality based on the project’s driving quality attributes. What this means in English is that the system does not live up to what is required of it by the stakeholders as identified by the missing quality attributes and requirements. One way to prevent functional shortcomings is to test the project’s architecture, design, and implementation against the project’s driving quality attributes to ensure that none of the attributes were missed in any of the phases. Another way to ensure a system has functional suitability is to certify that all its requirements are fully articulated so that there is no chance for misconceptions or misinterpretations by all stakeholders. This will help prevent any issues regarding interpreting the system requirements during the initial architectural concept phase, design phase and implementation phase. Consider the applicability of other architectural models When considering an architectural model for a project is also important to consider other alternative architectural models to ensure that the model that is selected will meet the systems required functionality and high quality attributes. Recently I can remember talking about a project that I was working on and a coworker suggested a different architectural approach that I had never considered. This new model will allow for the same functionally that is offered by the existing model but will allow for a higher quality project because it fulfills more quality attributes. It is always important to seek alternatives prior to committing to an architectural model. Factors used to identify high-risk components A high risk component can be defined as a component that fulfills 2 or more quality attributes for a system. An example of this can be seen in a web application that utilizes a remote database. One high-risk component in this system is the TCIP component because it allows for HTTP connections to handle by a web server and as well as allows for the server to also connect to a remote database server so that it can import data into the system. This component allows for the assurance of data quality attribute and the accessibility quality attribute because the system is available on the network. If for some reason the TCIP component was to fail the web application would fail on two quality attributes accessibility and data assurance in that the web site is not accessible and data cannot be update as needed. Summary As stated previously, quality is what all software engineers should strive for when building a new system or adding new functionality. The quality of a system can be directly determined by how closely it is implemented when compared to its desired quality attributes. One way to insure a higher quality system is to enforce that all project requirements are fully articulated so that no assumptions or misunderstandings can be made by any of the stakeholders. By doing this a system has a better chance of becoming a high quality system based on its quality attributes

  Read the article

• Big Data&rsquo;s Killer App&hellip;

  - by jean-pierre.dijcks

  Recently Keith spent  some time talking about the cloud on this blog and I will spare you my thoughts on the whole thing. What I do want to write down is something about the Big Data movement and what I think is the killer app for Big Data... Where is this coming from, ok, I confess... I spent 3 days in cloud land at the Cloud Connect conference in Santa Clara and it was quite a lot of fun. One of the nice things at Cloud Connect was that there was a track dedicated to Big Data, which prompted me to some extend to write this post. What is Big Data anyways? The most valuable point made in the Big Data track was that Big Data in itself is not very cool. Doing something with Big Data is what makes all of this cool and interesting to a business user! The other good insight I got was that a lot of people think Big Data means a single gigantic monolithic system holding gazillions of bytes or documents or log files. Well turns out that most people in the Big Data track are talking about a lot of collections of smaller data sets. So rather than thinking "big = monolithic" you should be thinking "big = many data sets". This is more than just theoretical, it is actually relevant when thinking about big data and how to process it. It is important because it means that the platform that stores data will most likely consist out of multiple solutions. You may be storing logs on something like HDFS, you may store your customer information in Oracle and you may store distilled clickstream information in some distilled form in MySQL. The big question you will need to solve is not what lives where, but how to get it all together and get some value out of all that data. NoSQL and MapReduce Nope, sorry, this is not the killer app... and no I'm not saying this because my business card says Oracle and I'm therefore biased. I think language is important, but as with storage I think pragmatic is better. In other words, some questions can be answered with SQL very efficiently, others can be answered with PERL or TCL others with MR. History should teach us that anyone trying to solve a problem will use any and all tools around. For example, most data warehouses (Big Data 1.0?) get a lot of data in flat files. Everyone then runs a bunch of shell scripts to massage or verify those files and then shoves those files into the database. We've even built shell script support into external tables to allow for this. I think the Big Data projects will do the same. Some people will use MapReduce, although I would argue that things like Cascading are more interesting, some people will use Java. Some data is stored on HDFS making Cascading the way to go, some data is stored in Oracle and SQL does do a good job there. As with storage and with history, be pragmatic and use what fits and neither NoSQL nor MR will be the one and only. Also, a language, while important, does in itself not deliver business value. So while cool it is not a killer app... Vertical Behavioral Analytics This is the killer app! And you are now thinking: "what does that mean?" Let's decompose that heading. First of all, analytics. I would think you had guessed by now that this is really what I'm after, and of course you are right. But not just analytics, which has a very large scope and means many things to many people. I'm not just after Business Intelligence (analytics 1.0?) or data mining (analytics 2.0?) but I'm after something more interesting that you can only do after collecting large volumes of specific data. That all important data is about behavior. What do my customers do? More importantly why do they behave like that? If you can figure that out, you can tailor web sites, stores, products etc. to that behavior and figure out how to be successful. Today's behavior that is somewhat easily tracked is web site clicks, search patterns and all of those things that a web site or web server tracks. that is where the Big Data lives and where these patters are now emerging. Other examples however are emerging, and one of the examples used at the conference was about prediction churn for a telco based on the social network its members are a part of. That social network is not about LinkedIn or Facebook, but about who calls whom. I call you a lot, you switch provider, and I might/will switch too. And that just naturally brings me to the next word, vertical. Vertical in this context means per industry, e.g. communications or retail or government or any other vertical. The reason for being more specific than just behavioral analytics is that each industry has its own data sources, has its own quirky logic and has its own demands and priorities. Of course, the methods and some of the software will be common and some will have both retail and service industry analytics in place (your corner coffee store for example). But the gist of it all is that analytics that can predict customer behavior for a specific focused group of people in a specific industry is what makes Big Data interesting. Building a Vertical Behavioral Analysis System Well, that is going to be interesting. I have not seen much going on in that space and if I had to have some criticism on the cloud connect conference it would be the lack of concrete user cases on big data. The telco example, while a step into the vertical behavioral part is not really on big data. It used a sample of data from the customers' data warehouse. One thing I do think, and this is where I think parts of the NoSQL stuff come from, is that we will be doing this analysis where the data is. Over the past 10 years we at Oracle have called this in-database analytics. I guess we were (too) early? Now the entire market is going there including companies like SAS. In-place btw does not mean "no data movement at all", what it means that you will do this on data's permanent home. For SAS that is kind of the current problem. Most of the inputs live in a data warehouse. So why move it into SAS and back? That all worked with 1 TB data warehouses, but when we are looking at 100TB to 500 TB of distilled data... Comments? As it is still early days with these systems, I'm very interested in seeing reactions and thoughts to some of these thoughts...

  Read the article

• IntelliJ IDEA 10 est-il « l'EDI Java le plus intelligent » ? Sa nouvelle version met en avant Android, Spring et GWT

  IntelliJ IDEA est-il « l'IDE Java le plus intelligent » ? Sa version 10 met en avant Android, Spring et GWT JetBrains est une entreprise de conception de logiciels connue pour son environnement de développement intégré ? et primé - Java IntelliJ IDEA. L'IDE vient de sortir officiellement hier en version 10. Une version majeure grâce à une série de nouvelles fonctionnalités, y compris dans son édition gratuite. La plus importante étant certainement le support d'Android. JetBrains décrit son IDE d'outil de « développement polyglotte basé sur JVM ». La version 10 apporte de nombreuses améliorations aux nombreuses technologies et structures qu'il s...

  Read the article

• Panduit Delivers on the Digital Business Promise

  - by Kellsey Ruppel

  How a 60-Year-Old Company Transformed into a Modern Digital BusinessConnecting with audiences through a robust online experience across multiple channels and devices is a nonnegotiable requirement in today’s digital world. Companies need a digital platform that helps them create, manage, and integrate processes, content, analytics, and more.Panduit, a company founded nearly 60 years ago, needed to simplify and modernize its enterprise application and infrastructure to position itself for long-term growth. Learn how it transformed into a digital business using Oracle WebCenter and Oracle Business Process Management. Join this webcast for an in-depth look at how these Oracle technologies helped Panduit: Increase self-service activity on their portal by 75% Improve number and quality of sales leads through increased customer interactions and registration over the web and mobile Create multichannel self-service interactions and content-enabled business processes Register now for this webcast. Register Now Presented by:Andy KershawSenior Director, Oracle WebCenter, Oracle BPM and Oracle Social Network Product Management, OracleVidya IyerIT Delivery Manager, PanduitPatrick GarciaIT Solutions Architect, Panduit Copyright © 2014, Oracle Corporation and/or its affiliates.All rights reserved. Contact Us | Legal Notices and Terms of Use | Privacy Statement

  Read the article

• Thomas Kurian's COLLABORATE Keynote: Process not Product

  - by Aaron Lazenby

  Right off the bat, Oracle's Senior Vice President, Server Technologies Development made his purpose very clear: demonstrate how the elements of the Oracle product stack are evolving (and integrating) together. There are some great details about the new functionality of each Oracle application line and how the different products sync and interact. The lifecycle charts in Kurian's presentation illustrate how data can flow from an Oracle Demantra into Oracle E-Business Suite and back out to an Oracle Agile system to support value chain planning. With so many products at play in the enterprise, Kurian shows that if you trust that your systems can work together, IT strategy becoming much more about managing business process than managing software product.

  Read the article

• Creating A SharePoint Parent/Child List Relationship&ndash; SharePoint 2010 Edition

  - by Mark Rackley

  Hey blog readers… It has been almost 2 years since I posted my most read blog on creating a Parent/Child list relationship in SharePoint 2007: Creating a SharePoint List Parent / Child Relationship - Out of the Box And then a year ago I improved on my method and redid the blog post… still for SharePoint 2007: Creating a SharePoint List Parent/Child Relationship – VIDEO REMIX Since then many of you have been asking me how to get this to work in SharePoint 2010, and frankly I have just not had time to look into it. I wish I could have jumped into this sooner, but have just recently began to look at it. Well.. after all this time I have actually come up with two solutions that work, neither of them are as clean as I’d like them to be, but I wanted to get something in your hands that you can start using today. Hopefully in the coming weeks and months I’ll be able to improve upon this further and give you guys some better options. For the most part, the process is identical to the 2007 process, but you have probably found out that the list view web parts in 2010 behave differently, and getting the Parent ID to your new child form can be a pain in the rear (at least that’s what I’ve discovered). Anyway, like I said, I have found a couple of solutions that work. If you know of a better one, please let us know as it bugs me that this not as eloquent as my 2007 implementation. Getting on the same page First thing I’d recommend is recreating this blog: Creating a SharePoint List Parent/Child Relationship – VIDEO REMIX in SharePoint 2010… There are some vague differences, but it’s basically the same…  Here’s a quick video of me doing this in SP 2010: Creating Lists necessary for this blog post Now that you have the lists created, lets set up the New Time form to use a QueryString variable to populate the Parent ID field: Creating parameters in Child’s new item form to set parent ID Did I talk fast enough through both of those videos? Hopefully by now that stuff is old hat to you, but I wanted to make sure everyone could get on the same page.  Okay… let’s get started. Solution 1 – XSLTListView with Javascript This solution is the more elegant of the two, however it does require the use of a little javascript.  The other solution does not use javascript, but it also doesn’t use the pretty new SP 2010 pop-ups.  I’ll let you decide which you like better. The basic steps of this solution are: Inserted a Related Item View Insert a ContentEditorWebPart Insert script in ContentEditorWebPart that pulls the ID from the Query string and calls the method to insert a new item on the child entry form Hide the toolbar from data view to remove “add new item” link. Again, you don’t HAVE to use a CEWP, you could just put the javascript directly in the page using SPD.  Anyway, here is how I did it: Using Related Item View / JavaScript Here’s the JavaScript I used in my Content Editor Web Part: <script type="text/javascript"> function NewTime() { // Get the Query String values and split them out into the vals array var vals = new Object(); var qs = location.search.substring(1, location.search.length); var args = qs.split("&"); for (var i=0; i < args.length; i++) { var nameVal = args[i].split("="); var temp = unescape(nameVal[1]).split('+'); nameVal[1] = temp.join(' '); vals[nameVal[0]] = nameVal[1]; } var issueID = vals["ID"]; //use this to bring up the pretty pop up NewItem2(event,"http://sp2010dev:1234/Lists/Time/NewForm.aspx?IssueID=" + issueID); //use this to open a new window //window.location="http://sp2010dev:1234/Lists/Time/NewForm.aspx?IssueID=" + issueID; } </script> Solution 2 – DataFormWebPart and exact same 2007 Process This solution is a little more of a hack, but it also MUCH more close to the process we did in SP 2007. So, if you don’t mind not having the pretty pop-up and prefer the comforts of what you are used to, you can give this one a try.  The basics steps are: Insert a DataFormWebPart instead of the List Data View Create a Parameter on DataFormWebPart to store “ID” Query String Variable Filter DataFormWebPart using Parameter Insert a link at bottom of DataForm Web part that points to the Child’s new item form and passes in the Parent Id using the Parameter. See.. like I told you, exact same process as in 2007 (except using the DataFormWeb Part). The DataFormWebPart also requires a lot more work to make it look “pretty” but it’s just table rows and cells, and can be configured pretty painlessly.  Here is that video: Using DataForm Web Part One quick update… if you change the link in this solution from: <tr> <td><a href="http://sp2010dev:1234/Lists/Time/NewForm.aspx?IssueID={$IssueIDParam}">Click here to create new item...</a> </td> </tr> to: <tr> <td> <a href="javascript:NewItem2(event,'http://sp2010dev:1234/Lists/Time/NewForm.aspx?IssueID={$IssueIDParam}');">Click here to create new item...</a> </td> </tr> It will open up in the pretty pop up and act the same as solution one… So… both Solutions will now behave the same to the end user. Just depends on which you want to implement. That’s all for now… Remember in both solutions when you have them working, you can make the “IssueID” invisible to users by using the “ms-hidden” class (it’s my previous blog post on the subject up there). That’s basically all there is to it! No pithy or witty closing this time… I am sorry it took me so long to dive into this and I hope your questions are answered. As I become more polished myself I will try to come up with a cleaner solution that will make everyone happy… As always, thanks for taking the time to stop by.

  Read the article

• My History with Agile

  - by Robert May

  I’m going to write my history with Agile here.  That way, in future posts, I can refer back to it, instead of typing it out in the post that contains information you may actually want to read.  Note that I’m actually a pretty senior developer, and do lots of technical interviews.  I’m an Agile fan because of the difference it makes in peoples lives and the improvement in quality it brings, and I’ll sacrifice my technological advance to help teams. Management History I started management pretty early in my career, starting with the first job that I ever had.  I actually do NOT have a CS or similar degree.  I have a Bachelor’s of Business Administration with an emphasis in Computer Information Systems. My first management gigs were around call center work and were very schedule oriented.  I didn’t understand the true value of teams, and I’m ashamed to admit, I actually installed a fingerprint scanner as a time clock in this job.  I shudder to think of the impact that I had on the team spirit.  I didn’t even trust them enough to fill out their time cards correctly.  How sad. I was managing nearly 100 people in this position, with the help of a great set of subordinates. I did try to come up with reward programs for the team, but again, didn’t understand the concept of team, so instead of letting the team determine how the rewards should work, I mandated from on high, which isn’t a good thing. I was told that I wasn’t the type that would be a good manager by people whom I respected a lot.  They said it because I was a computer geek, since they don’t understand good management either, but in retrospect, they were right about me then.  I was too green. After my first job, I went on to other jobs and with the exception of one job, I’ve managed people at them all.  The rest of the management story is important for understanding agile, so I’ll save it for my next post. Technical History I’ve been in software development for many, many years.  I technically started programming on a commodore 64 in basic.  I didn’t know that I was programming, but I was sure having fun.  That was followed by batch files, Gorilla hacking (I always had to win), WordPerfect Macro programming and other things that taught me the basics. My first “real” job was with a telephone company, and that’s where I made my first database application in DataEase, wrote my first VBA app and started using real programming tools, like turbo pascal, vb3-vb5, and semi-real tools like RPG and VisualRPG.  I wrote my first web page in 1994, and built my first data driven web page in 1995 using perlDB.  You really can do anything with Perl.  At this time, I also started a Linux based internet service provider that is still in operation today.  One of the people I worked with is now a Microsoft employee building and designing frameworks you probably know well.  Smart guy.  I also built my first ASP applications connecting to Sql Server 6.5, setup Exchange 5.5 for the company, and many other system administration stuff.  I’m a programmer by choice, mostly because I don’t really like PC support. From there, I went on to a large state agency.  I got to see and maintain true waterfall projects.  5 years of maintaining the 200 VB COM+ (MTS, actually) dlls that were used to calculate a single number is a long time.  That was all Microsoft DNS technologies.  SQL Server and VB6 were the tools of choice, although .net started to be a factor near the end of employment.  I did some heavy XML work at this job and even wrote an XSD parser and validator in VB6 that was a shim until MSXML 3.0 came out.  Prior to 3.0, XSD’s weren’t supported, and I didn’t want to write DTDs. Ironically, jobs after this were more generic.  I pretty much settled in on the .net framework and revisions of it.  Lots of WPF, some silverlight, lots of ASP.NET, some SQL Azure, lots of SQL Server, some Oracle, but I don’t think that I was as passionate about development and technologies.  I was more into the management of development.  I like people. Technorati Tags: Agile,history

  Read the article

• IOUG and Oracle Enterprise Manager User Community Twitter Chat and Sessions at OpenWorld

  - by Anand Akela

  Like last many years, we will have annual Oracle Users Forum on Sunday, September 30th, 2012 at Moscone West, Levels 2 & 3 . It will be open to all registered attendees of Oracle Open World and conferences running from September 29 to October 5, 2012 . This will be a great  opportunity to meet with colleagues, peers, and subject matter experts to share best practices, tips, and techniques around Oracle technologies. You could sit in on a special interest group (SIG) meeting or session and learn how to get more out of Oracle technologies and applications. IOUG and Oracle Enterprise Manager team invites you to join a Twitter Chat on Sunday, Sep. 30th from 11:30 AM to 12:30 PM.  IOUG leaders, Enterprise Manager SIG contributors and many Oracle Users Forum speakers will answer questions related to their experience with Oracle Enterprise Manager and the activities and resources available for  Enterprise Manager SIG members. You can participate in the chat using hash tag #em12c on Twitter.com or by going to  tweetchat.com/room/em12c      (Needs Twitter credential for participating).  Feel free to join IOUG and Enterprise team members at the User Group Pavilion on 2nd Floor, Moscone West. Here is the complete list of Oracle Enterprise Manager sessions during the Oracle Users Forum : Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Time Session Title Speakers Location 8:00AM - 8:45AM UGF4569 - Oracle RAC Migration with Oracle Automatic Storage Management and Oracle Enterprise Manager 12c VINOD Emmanuel -Database Engineering, Dell, Inc. Wendy Chen - Sr. Systems Engineer, Dell, Inc. Moscone West - 2011 8:00AM - 8:45AM UGF10389 -  Monitoring Storage Systems for Oracle Enterprise Manager 12c Anand Ranganathan - Product Manager, NetApp Moscone West - 2016 9:00AM - 10:00AM UGF2571 - Make Oracle Enterprise Manager Sing and Dance with the Command-Line Interface Ray Smith - Senior Database Administrator, Portland General Electric Moscone West - 2011 10:30AM - 11:30AM UGF2850 - Optimal Support: Oracle Enterprise Manager 12c Cloud Control, My Oracle Support, and More April Sims - DBA, Southern Utah University Moscone West - 2011 11:30AM - 12:30PM IOUG and Oracle Enterprise Manager Joint Tweet Chat  Join IOUG Leaders, IOUG's Enterprise Manager SIG Contributors and Speakers on Twitter and ask questions related to practitioner's experience with Oracle Enterprise Manager and the new IOUG 's Enterprise Manager SIG. To attend and participate in the chat, please use hash tag #em12c on twitter.com or your favorite Twitter client. You can also go to tweetchat.com/room/em12c to watch the conversation or login with your twitter credentials to ask questions. User Group Pavilion 2nd Floor, Moscone West 12:30PM-2:00PM UGF5131 - Migrating from Oracle Enterprise Manager 10g Grid Control to 12c Cloud Control    Leighton Nelson - Database Administrator, Mercy Moscone West - 2011 2:15PM-3:15PM UGF6511 -  Database Performance Tuning: Get the Best out of Oracle Enterprise Manager 12c Cloud Control Mike Ault - Oracle Guru, TEXAS MEMORY SYSTEMS INC Tariq Farooq - CEO/Founder, BrainSurface Moscone West - 2011 3:30PM-4:30PM UGF4556 - Will It Blend? Verifying Capacity in Server and Database Consolidations Jeremiah Wilton - Database Technology, Blue Gecko / DatAvail Moscone West - 2018 3:30PM-4:30PM UGF10400 - Oracle Enterprise Manager 12c: Monitoring, Metric Extensions, and Configuration Best Practices Kellyn Pot'Vin - Sr. Technical Consultant, Enkitec Moscone West - 2011 Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• Nighthacking with James Gosling

  - by Yolande Poirier

  Java Evangelist Stephen Chin is back on the road for a new NightHacking Tour. He is meeting with James Gosling at Kona, Hawaii, the launch base of the Wave Glider. The Glider is an aquatic robot which communicates real-time data from the surface of the ocean. It runs on an ARM chip using Java SE Embedded.  "During this broadcast we will show some of the footage of his aquatic robots, talk through the technologies he is hacking on daily, and do Q&A with folks on the live chat" explains Stephen Chin.  Sign up for the live stream on Wednesday, October 23rd at:  8AM Hawaii Time 11AM PST 2PM EST 20:00 CET Follow @nighthackingtv for the next Nighthacking events

  Read the article

• NightHacking with James Gosling

  - by Yolande Poirier

  Java Evangelist Stephen Chin is back on the road for a new NightHacking Tour. He is meeting with James Gosling at Kona, Hawaii, the launch base of the Wave Glider. The Glider is an aquatic robot which communicates real-time data from the surface of the ocean. It runs on an ARM chip using Java SE Embedded.  "During this broadcast we will show some of the footage of his aquatic robots, talk through the technologies he is hacking on daily, and do Q&A with folks on the live chat" explains Stephen Chin.  Sign up for the live stream on Wednesday, October 23rd at:  8AM Hawaii Time 11AM PST 2PM EST 20:00 CET Follow @nighthackingtv for the next Nighthacking events

  Read the article

• RequestValidation Changes in ASP.NET 4.0

  - by Rick Strahl

  There’s been a change in the way the ValidateRequest attribute on WebForms works in ASP.NET 4.0. I noticed this today while updating a post on my WebLog all of which contain raw HTML and so all pretty much trigger request validation. I recently upgraded this app from ASP.NET 2.0 to 4.0 and it’s now failing to update posts. At first this was difficult to track down because of custom error handling in my app – the custom error handler traps the exception and logs it with only basic error information so the full detail of the error was initially hidden. After some more experimentation in development mode the error that occurs is the typical ASP.NET validate request error (‘A potentially dangerous Request.Form value was detetected…’) which looks like this in ASP.NET 4.0: At first when I got this I was real perplexed as I didn’t read the entire error message and because my page does have: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="NewEntry.aspx.cs" Inherits="Westwind.WebLog.NewEntry" MasterPageFile="~/App_Templates/Standard/AdminMaster.master" ValidateRequest="false" EnableEventValidation="false" EnableViewState="false" %> WTF? ValidateRequest would seem like it should be enough, but alas in ASP.NET 4.0 apparently that setting alone is no longer enough. Reading the fine print in the error explains that you need to explicitly set the requestValidationMode for the application back to V2.0 in web.config: <httpRuntime executionTimeout="300" requestValidationMode="2.0" /> Kudos for the ASP.NET team for putting up a nice error message that tells me how to fix this problem, but excuse me why the heck would you change this behavior to require an explicit override to an optional and by default disabled page level switch? You’ve just made a relatively simple fix to a solution a nasty morass of hard to discover configuration settings??? The original way this worked was perfectly discoverable via attributes in the page. Now you can set this setting in the page and get completely unexpected behavior and you are required to set what effectively amounts to a backwards compatibility flag in the configuration file. It turns out the real reason for the .config flag is that the request validation behavior has moved from WebForms pipeline down into the entire ASP.NET/IIS request pipeline and is now applied against all requests. Here’s what the breaking changes page from Microsoft says about it: The request validation feature in ASP.NET provides a certain level of default protection against cross-site scripting (XSS) attacks. In previous versions of ASP.NET, request validation was enabled by default. However, it applied only to ASP.NET pages (.aspx files and their class files) and only when those pages were executing. In ASP.NET 4, by default, request validation is enabled for all requests, because it is enabled before the BeginRequest phase of an HTTP request. As a result, request validation applies to requests for all ASP.NET resources, not just .aspx page requests. This includes requests such as Web service calls and custom HTTP handlers. Request validation is also active when custom HTTP modules are reading the contents of an HTTP request. As a result, request validation errors might now occur for requests that previously did not trigger errors. To revert to the behavior of the ASP.NET 2.0 request validation feature, add the following setting in the Web.config file: <httpRuntime requestValidationMode="2.0" /> However, we recommend that you analyze any request validation errors to determine whether existing handlers, modules, or other custom code accesses potentially unsafe HTTP inputs that could be XSS attack vectors. Ok, so ValidateRequest of the form still works as it always has but it’s actually the ASP.NET Event Pipeline, not WebForms that’s throwing the above exception as request validation is applied to every request that hits the pipeline. Creating the runtime override removes the HttpRuntime checking and restores the WebForms only behavior. That fixes my immediate problem but still leaves me wondering especially given the vague wording of the above explanation. One thing that’s missing in the description is above is one important detail: The request validation is applied only to application/x-www-form-urlencoded POST content not to all inbound POST data. When I first read this this freaked me out because it sounds like literally ANY request hitting the pipeline is affected. To make sure this is not really so I created a quick handler: public class Handler1 : IHttpHandler { public void ProcessRequest(HttpContext context) { context.Response.ContentType = "text/plain"; context.Response.Write("Hello World <hr>" + context.Request.Form.ToString()); } public bool IsReusable { get { return false; } } } and called it with Fiddler by posting some XML to the handler using a default form-urlencoded POST content type: and sure enough – hitting the handler also causes the request validation error and 500 server response. Changing the content type to text/xml effectively fixes the problem however, bypassing the request validation filter so Web Services/AJAX handlers and custom modules/handlers that implement custom protocols aren’t affected as long as they work with special input content types. It also looks that multipart encoding does not trigger event validation of the runtime either so this request also works fine: POST http://rasnote/weblog/handler1.ashx HTTP/1.1 Content-Type: multipart/form-data; boundary=------7cf2a327f01ae User-Agent: West Wind Internet Protocols 5.53 Host: rasnote Content-Length: 40 Pragma: no-cache <xml>asdasd</xml>--------7cf2a327f01ae *That* probably should trigger event validation – since it is a potential HTML form submission, but it doesn’t. New Runtime Feature, Global Scope Only? Ok, so request validation is now a runtime feature but sadly it’s a feature that’s scoped to the ASP.NET Runtime – effective scope to the entire running application/app domain. You can still manually force validation using Request.ValidateInput() which gives you the option to do this in code, but that realistically will only work with the requestValidationMode set to V2.0 as well since the 4.0 mode auto-fires before code ever gets a chance to intercept the call. Given all that, the new setting in ASP.NET 4.0 seems to limit options and makes things more difficult and less flexible. Of course Microsoft gets to say ASP.NET is more secure by default because of it but what good is that if you have to turn off this flag the very first time you need to allow one single request that bypasses request validation??? This is really shortsighted design… <sigh>© Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET  

  Read the article

• Silent Partner

  - by [email protected]

  The Team Behind the Man Behind the Mask As a continuing sponsor of the blockbuster Iron Man franchise, Oracle has been quietly preparing for the explosive sequel blasting its way into theaters this May. Through a series of advertising campaigns, immersive online experiences, and contests, Oracle plans to highlight its backstage efforts to help Marvel Entertainment hone its newfound superpowers. By driving the performance of critical systems, Oracle technologies are helping Marvel transform itself from mild-mannered comic book publisher to film industry power broker. You can learn more about this dynamic duo, and get free movie memorabilia, by visiting our Iron Man 2 showcase site.

  Read the article

< Previous Page | 759 760 761 762 763 764 765 766 767 768 769 770  | Next Page >