Search Results

Search found 66534 results on 2662 pages for 'document set'.

Page 765/2662 | < Previous Page | 761 762 763 764 765 766 767 768 769 770 771 772  | Next Page >

  • Nginx or Apache for a VPS?

    - by James
    I consider myself to be an inexperienced user/administrator when it comes to running my VPS. I can get by with a few CLI commands, I can set up Webmin and I can set up Yum repos, but beyond the very basic stuff, I'm out of my depth. So far, I'm running Apache. I don't know it particularly well, but I can get by with editing httpd.conf if I'm told what to edit. I've heard good things about Nginx and that it's not as resource-hungry as Apache. I'd like to give it a go, but I can't find any information about its suitability for administrators like me, with little experience of sysadmin or web server config. Webmin now has support for Nginx, so getting it installed and running probably won't be too much of a problem. What I'm wondering is, from a site administrator perspective, is running Nginx as transparent as running Apache? IE, at the moment, I can just throw up Wordpress and Drupal sites without having much to worry about or having to make any config changes to Apache. Would Nginx be as transparent?

    Read the article

  • Copying files to zfs mountpoint doesn't work - the files aren't actually copied to the other filesystem,

    - by user113904
    I have 3 x 4 TB disks in a NAS that I want to group together and access as if they were one whole 'unit' of some kind. I also have a 250GB disk containing the OS - this is full of films and tv shows currently. I thought zfs sounded good so I created a raidz zpool, after installing the ppa sudo zpool create store raidz /dev/sdb /dev/sdc /dev/sdd and set the mountpoint to /mnt/store sudo zfs set mountpoint=/mnt/store /store checked it was successful - I think it was sudo zfs list NAME USED AVAIL REFER MOUNTPOINT store 266K 7.16T 170K /mnt/store Then I wanted to move over a whole load of files from my home directory. I went to where the to-be-copied folder was (called media) and entered sudo cp -R * /mnt/store cp: cannot create directory `/mnt/store/media': No space left on device It seems like it's not copying over to the new filesystem I made (or thought I did). I've never really done this type of thing until a few days ago so may be running before I can walk... is this not the right way to copy files across? I've only used windows before so the idea of mountpoints is a bit mind boggling. I'm using XBMCbuntu 12 beta 2.0 which is based on 12.04. Will retry with normal Ubuntu 12.04 desktop to see if that's the problem. thanks for the help!

    Read the article

  • ZenGallery: a minimalist image gallery for Orchard

    - by Bertrand Le Roy
    There are quite a few image gallery modules for Orchard but they were not invented here I wanted something a lot less sophisticated that would be as barebones and minimalist as possible out of the box, to make customization extremely easy. So I made this, in less than two days (during which I got distracted a lot). Nwazet.ZenGallery uses existing Orchard features as much as it can: Galleries are just a content part that can be added to any type The set of photos in a gallery is simply defined by a folder in Media Managing the images in a gallery is done using the standard media management from Orchard Ordering of photos is simply alphabetical order of the filenames (use 1_, 2_, etc. prefixes if you have to) The path to the gallery folder is mapped from the content item using a token-based pattern The pattern can be set per content type You can edit the generated gallery path for each item The default template is just a list of links over images, that get open in a new tab No lightbox script comes with the module, just customize the template to use your favorite script. Light, light, light. Rather than explaining in more details this very simple module, here is a video that shows how I used the module to add photo galleries to a product catalog: Adding a gallery to a product catalog You can find the module on the Orchard Gallery: https://gallery.orchardproject.net/List/Modules/Orchard.Module.Nwazet.ZenGallery/ The source code is available from BitBucket: https://bitbucket.org/bleroy/nwazet.zengallery

    Read the article

  • Apache HTTPS ProxyPass certificate location

    - by oz1cz
    I'm trying to set up an Apache server that uses ProxyPass to pass HTTPS requests on to another server. Let's call the proxy server ALPHA and the target server BETA. ALPHA does not run HTTPS, but BETA does. I first tried using this virtual host specification on ALPHA: <VirtualHost *:443> ServerName mysite.com ProxyPass / https://192.168.1.105/ # BETA's IP address ProxyPassReverse / https://192.168.1.105/ # BETA's IP address ProxyPreserveHost On ProxyTimeout 600 SSLProxyEngine On RequestHeader set Front-End-Https "On" CacheDisable * </VirtualHost> But when I tried this, Apache complained saying, "[error] Server should be SSL-aware but has no certificate configured [Hint: SSLCertificateFile]". I had to copy the SSL certificate from BETA to ALPHA and add these lines to the host specification on ALPHA: SSLEngine on SSLCertificateKeyFile /usr/local/ssl/private/BETA_private.key SSLCertificateFile /usr/local/ssl/crt/BETA_public.crt SSLCertificateChainFile /usr/local/ssl/crt/BETA_intermediate.crt Now the system works. But I have a feeling that I have done something wrong or unnecessary. I have the web site's private key and certificate lying on both ALPHA and BETA. Is that necessary? Should I have done it differently?

    Read the article

  • BPM 11gR1 now available on Amazon EC2

    - by Prasen Palvankar
    BPM 11gR1 now available on Amazon EC2The new Oracle BPM 11gR1, including the latest Oracle SOA Suite 11gR1 Patchset-2 is now available as an Amazon Machine Image (AMI). This is a fully configured image which requires absolutely no installation and lets you get hands on experience with the software within minutes. This image has all the required software installed and configured and includes the following:Oracle 11g Database Standard Edition Oracle SOA Suite 11gR1 Patch-set 2Oracle BPM 11gR1Oracle Webcenter with BPM Process SpacesOracle Universal Content ManagementOracle JDeveloper with SOA and BPM pluginsNote: Use of this AMI requires acceptance of Oracle Technology Network (OTN) terms of use.To use this AMI, follow these steps: Login to your Amazon account and browse to Amazon AWS Console. If this is the first time you are using Amazon Web Services please visit https://aws.amazon.com/ec2/ for information on Amazon Elastic Cloud Computing and how to get started with Amazon EC2Make sure your security group that you will be using to launch the instance allows the following ports to be opened:22 (SSH)1521, 7001, 8001, 8888, 9001Click on AMIsChange the Viewing filters to 64-bit and enter soa-bpm in the search box. You should see the following AMI:083342568607/oracle-soa-bpm-11gr1-ps2-4.1-pubSelect the AMI and click on Launch or Spot Request. For more information on spot requests, please visit the Amazon EC2 link aboveAccept all the defaults and launch the instanceWhen the instance state changes to running, copy the assigned public host name and connect to it using either PuTTY or SSH command. For PuTTY usage, refer to this document.Once you are connected to the instance using PuTTY or SSH, you will be presented with the terms of use.Accept the terms of use to proceed. This will prompt you to set passwords for your oracle OS login as well as for VNC. Note that the instance will not be usable until you have accepted the terms of use.The instance is now ready to use. The SOA/BPM and other servers are automatically started once you accept the term of use. Initial startups can take about 5-10 minutes.If you would like to use the JDeveloper installed in the AMI, you can access it either using VNC or NX. You can get the NX client from NoMachine./home/oracle/README.txt contains all the URLs that you can use to access the Enterprise Manager, BPM Composer, BPM Workspace, Webcenter etc.

    Read the article

  • Use Enterprise Manager Cloud Control to monitor OBIEE 11.1.1.7.x Dashboards

    - by Torben Hein -Oracle
    (in via Senthil )  If your OBIEE 11.1.1.7.x is set up in the following way: The OBIEE repository is an Oracle Database and is set up as a data warehouse Usage tracking is enabled in OBIEE. ( For information on how to enable usage tracking in OBIEE, refer to the following link: Setting Up Usage Tracking in Oracle BI 11g ) The OBIEE instance is discovered in EM Cloud Control. ( For information on how to discover an OBIEE instance in Cloud Control, refer to the following link: Discovering Oracle Business Intelligence Instance and Oracle Essbase Targets ) The OBIEE repository is discovered in EM Cloud Control. ( For information on how to discover an Oracle database, refer to the following link: Discovering, Promoting, and Adding Database Targets ) then we've got news for you: KM Article:  OBIEE 11g: How To Diagnose Slowly Performing Dashboards using Enterprise Manager Cloud Control (Doc ID 1668236.1) takes you step by step through monitoring the SQL query performance behind your OBIEE dashboard. This Diagnostic approach ... .. will help you piece together information on BI dashboard performance, e.g. processing time from the different layers of the BI system including the repository. .. should enable you to get to the bottom of slow dashboards by using the wealth of information available in EM Cloud Control on OBIEE and Oracle DB. .. will NOT fix any performance issues on its own, but will help identify bottlenecks while processing dashboard requests. (layout and post: Torben, authorized: Lia)

    Read the article

  • CodePlex Daily Summary for Wednesday, May 07, 2014

    CodePlex Daily Summary for Wednesday, May 07, 2014Popular ReleasesSeal Report: Seal Report 1.4: New Features: Report Designer: New option to convert a Report Source into a Repository Source. Report Designer: New contextual helper menus to select, remove, copy, prompt elements in a model. Web Server: New option to expand sub-folders displayed in the tree view. Web Server: Web Folder Description File can be a .cshtml file to display a MVC View. Views: additional CSS parameters for some DIVs. NVD3 Chart: Some default configuration values have been changed. Issues Addressed:16 ...Magick.NET: Magick.NET 6.8.9.002: Magick.NET linked with ImageMagick 6.8.9.0.VidCoder: 1.5.22 Beta: Added ability to burn SRT subtitles. Updated to HandBrake SVN 6169. Added checks to prevent VidCoder from running with a database version newer than it expects. Tooltips in the Advanced Video panel now trigger on the field labels as well as the fields themselves. Fixed updating preset/profile/tune/level settings on changing video encoder. This should resolve some problems with QSV encoding. Fixed tunes and profiles getting set to blank when switching between x264 and x265. Fixed co...NuGet: NuGet 2.8.2: We will be releasing a 2.8.2 version of our own NuGet packages and the NuGet.exe command-line tool. The 2.8.2 release will not include updated VS or WebMatrix extensions. NuGet.Server.Extensions.dll needs to be used alongside NuGet-Signed.exe to provide the NuGet.exe mirror functionality.DNN CMS Platform: 07.03.00 BETA (Not For Production Use): DNN 7.3 release is focused on performance and we have made a variety of changes to improve the run-time characteristics of the platform. End users will notice faster page response time and administrators will appreciate a more responsive user experience, especially on larger scale web sites. This is a BETA release and is NOT recommended for production use. There is no upgrade path offered from this release to the final DNN 7.3 release. Known Issues - The Telerik RAD Controls for ASP.NET AJA...babelua: 1.5.3: V1.5.3 - 2014.5.6Stability improvement: support relative path when debugging lua files; improve variable view function in debugger; fix a bug that when a file is loaded at runtime , its breakpoints would not take effect; some other bug fix; New feature: improve tool windows color scheme to look better with different vs themes; comment/uncomment code block easily; some other improve;CTI Text Encryption: CTI Text Encryption 5.0: Improve encryption algorithm. Simplify all-non encryption related mechanism (Simplify user interface)SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 2.0.2: SmartStore.NET 2.0.2 is primarily a maintenance release for version 2.0.0, which has been released on April 04 2014. It contains several improvements & important fixes. BugfixesIMPORTANT FIX: Memory leak leads to OutOfMemoryException in application after a while Installation fix: some varchar(MAX) columns get created as varchar(4000). Added a migration to fix the column specs. Installation fix: Setup fails with exception Value cannot be null. Parameter name: stream Bugfix for stock iss...Channel9's Absolute Beginner Series: Windows Phone 8.1: Entire source code for Windows Phone 8.1 Absolute Beginner Series.BIDS Helper: BIDS Helper 1.6.6: This BIDS Helper beta release brings support for SQL Server 2014 and SSDTBI for Visual Studio 2013. (Note that SSDTBI for Visual Studio 2013 is currently unavailable to download from Microsoft. We are releasing BIDS Helper support to help those who downloaded it before it became unavailable, and we will recheck BIDS Helper 2014 is compatible after SSDTBI becomes available to download again.) BIDS Helper 2014 Beta Limitations: SQL Server 2014 support for Biml is still in progress, so this bet...Windows Phone IsoStoreSpy (a cool WP8.1 + WP8 Isolated Storage Explorer): IsoStoreSpy WP8.1 3.0.0.0 (Win8 only): 3.0.0.0 + WP8.1 & WP8 device allowed + Local, Roaming or Temp directory Selector for WindowsRuntime apps + Version number in the title :)CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.24.0: ShortcutMapping panel now allows direct modification of the shortcuts. Custom updater dropped support for MSI installation but it still allows downloading of MSI http://www.csscript.net/npp/codeplex/non_msi_update.pngProDinner - ASP.NET MVC Sample (EF5, N-Tier, jQuery): 8.2: upgrade to mvc 5 upgrade to ASP.net MVC Awesome 4.0, EF 6.1, latest jcrop, Windsor Castle etc. ability to show/hide the dog using tinymce for the feedback page mobile friendly uiASP.net MVC Awesome - jQuery Ajax Helpers: 4.0: version 4.0 ========================== - added InitPopup, InitPopupForm helpers, open initialized popups using awe.open(name, params) - added Tag or Tags for all helpers, usable in mod code - added popup aweclose, aweresize events - popups have api accessible via .data('api'), with methods open, close and destroy - all popups have .awe-popup class - popups can be grouped using .Group(string), only 1 popup in the same group can exist at the same time - added awebeginload event for...SEToolbox: SEToolbox 01.028.008 Release 2: Fixes for drag-drop copying. Added ship joiner, to rejoin a broken ship! Installation of this version will replace older version.ScreenToGif: Release 1.0: What's new: • Small UI tweaks everywhere. • You can add Text, Subtitles and Title Frames. • Processing the gif now takes less time. • Languages: Spanish, Italian and Tamil added. • Single .exe multi language. • Takes less time to apply blur and pixelated efect. • Restart button. • Language picker. (If the user wants to select a diferent language than the system's) • "Encoding Finished" page with a link to open the file. • GreenScreen unchanged pixels to save kilobytes. • "Check for Updates" t...Touchmote: Touchmote 1.0 beta 11: Changes Support for multiple monitor setup Additional settings for analog sticks More reliable pairing Bug fixes and improvementsPowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.2: Added Get-IniValue / Set-IniValue functions. Replaces Get-IniContent / Set-IniContent which were a bit unwieldy. The new functions are much easier to use. Added -Value parameter to Get-RegistryKey so that a specific registry value can be retrieved instead of the entire Key as an object Fixed Test-Battery to work with machines that can have multiple batteries Fixed issue where BlockExecution would fail if a Custom Temp Path was specified in the config file Updated examples with latest ...Microsoft Script Analyzer: Microsoft Script Analyzer 1.1: The Script Analyzer scans your current PowerShell script code against some PowerShell best practice rules, and provide suggestions to improve the script quality and readability. By double-clicking the checking result, the relevant script code will be highlighted in the code editor. Script Analyzer result You can configure the Script Analyzer rules in the Settings window of Script Analyzer. Script Analyzer settings The current release includes 5 PowerShell best practice rules. Invoke-...Microsoft Script Browser: Script Browser 1.1: Script Browser for Windows PowerShell ISE was designed and developed in response to many IT Pros’ and MVPs’ feedback during the MVP Global Summit. It puts nearly 10K script examples at IT Pros fingertips when they write scripts to automate their IT tasks. Users can search, learn, download and manage scripts from within their scripting environment - PowerShell ISE - with just a few button clicks. It saves the time of switching back and forth between webpages and scripting environment, and also...New ProjectsAOP.Net: this project is used to implement AOP in .NetARTYKLES: Project articles ASP.NET Identity 2.0 Azure Table Storage: This project provides a high performance cloud solution for ASP.NET Identity 2.0 using Azure Table storage replacing the Entity Framework / MSSQL provider.Associativy Taxonomies Adapter: Administration module for the Associativy (http://associativy.com) Orchard graph platform.BancoSim: BancoSim inicioChaosKit: Chaos theory based time series analysis library, calculating Lyapunov and Hurst exponents and making iterated predictions.ElectrodomesticosAbr2014: Proyecto de ElectrodomesticosGPM: general privilege systemLNTest: LNTestLocal Electrodomésticos 001: Se tiene un local de electrodomésticos que tiene intensión de salir a online. MVC - Filtered TextBox: The project contains MVC Html helper methods for rendering a filtered text box that allows the user to enter only a given set of characters.MvcTrialer: A simple class for .NET 4 MVC to redirect pages if users exceeded a trial period date.NotificationsExtensions.Portable: Portable Class Library Version of the NotificationsExtensions NuGet Packages. Used to Create WinRT/Windows Phone Notification XML.OBD-II: Cross platform library for communicating with OBD-II adapters.Powershell Analyze Robocopy Logs and mail its results: It analyzes a path with Robocopy Log files. It'll create a summary file with information about all log files and it'll mail its results.Proyecto Electrodomesticos: proyecto electrodomesticosPrueba1: asdPVT Library: PVT library for calculating the thermodynamic properties of fluidQuanLyPhongMachThuY: Project serve for .NET CourcseRAMED: project that give some functionalities to ramed projects management like permissions and capabilities to make the management of this type of projects easierSimple Contacts: Simple Contacts Directory application built with ASP.NET MVC and Web API that perform basic CRUD (create, read, update, delete) operations.Stream oriented base64 encoder and decoder: Very simple implementation of stream oriented base64 encoder and decoder, which uses standard .NET Stream decorators. Super Casa de Electronica: no se q escribirTiny Deduplicator: Tiny Deduplicator is a file deduplicator which can scan for duplicate files, and allows the user to control which duplicates they are going to keep or recycle.webdemo: DemonstrationWindows Embedded Compact Edition 2013 File Transfer: A console app for transferring files using TCPIP between Windows Embedded Compact devices, and between them and the desktop. Compact 2013 and Desktop versions.Windows Tile Updater: An simple example of using the Microsoft Universal App to update a tile on the start screen. This was created to accompany a series of blog posts.WMI.NET: WMI.NET Demo Project form Win32 ClassesWumper Thumpers: The ultimate sweg

    Read the article

  • Textures quality issues with Libgdx

    - by user1876708
    I have drawn several vector objets and characters ( in Adobe Illustrator ) for my game on Android. They are all scalable at any size without any quality losses ( of course it's vector ^^ ). I have tried to simulate my gameboard directly on Illustrator just before setting my assests on libdgx to implement them in my game. I set all the objects at the good size, so that they fit perfectly on my XHDPI device I am running my test on. As you can see it works great ( for me at least ^^ ), the PNG quality is good for me, as expected ! So I have edited all my PNG at this size, set my assets on libgdx and build my game apk. And here is a screenshot of my gameboard ( don't pay attention at the differences of placing and objects, but check at the objets presents on both screenshot ). As you can see, I have a loss of my PNG quality in the game. It can be seen clealry on the hedgehog PNG, but also ( but not as obvious ) on the mushroom ( check at the outline ) and the hole PNG. If you really pay attention, on every objects, you can see pixels that are not visible on my first screenshot. And I just can't figure out why this is happening Oo If you have any ideas, you are very welcome ! Thanks. PS : You can check more clearly the 2 gameboard on this two links ( look at them at 100%, display at high resolution ) : Good quality link, from Illustrator Poor quality link, from the game Second phase of tests : We display an object ( the hedgehog ) on our main menu screen to see how it looks like. The things is that it looks like he is suppose to, which means, high quality with no pixels. The hedgehog PNG is coming from an atlas : layer.addActor(hedgehog); No loss of quality with this method So we think the problem is comming from the method we are using to display it on our gameboard : blocks[9][3] = new Block(TextureUtils.hedgehog, new Vector2(9, 3)); the block is getting the size from the vector we are associating to it, but we have a loss of quality with this method.

    Read the article

  • 12.10 visual performance using nvidia driver

    - by user100485
    My fresh ubuntu 12.10 install is slow, not something extreme but dragging windows, switching workspaces and things like that are just slow and look horrible. it feels like the fps is dropping in a game. Doing some photoshop work in windows was even a relief! This effect gets worse if I connect my external monitor. My system is an intel pentium dual core T4500 with 4gb memory and a GeForce 8200M G/integrated/SSE2 graphics chip. Nothing fancy but should be able to run ok. My "experience" in ubuntu is set to standard. (MSI cr500 laptop) I've installed the nvidia drivers, tried current and experimental and the experimental drivers seem to perform a bit better but overall bad anyway. I set the mode to adaptive in the nvidia-settings tool and it goes to maximum setting directly and doesn't come back. Using htop I found out that compiz or the X server always use a few percent of my cpu, more than I think it should and the time consumed is 5:18 for compiz, 4:33 for /usr/bin/X and 2:41 for google chrome(about 30 tabs open so not too strange I think.) What can I do to increase the visual performance cause this makes me not want to use ubuntu in public!

    Read the article

  • Google Analytics checkout page tracking problem

    - by Amir E. Habib
    I am running a multilingual website, each lang on a different domain name. I am trying to lead all purchase requests to the checkout progress, which has its own domain too. In order to keep Google Analytics tracking I've updated the Google Analytics code accordingly. I set the source domain to 'multiple top-level domains'. Everything is going fine so far unless in E-commerce Overview; the "Sources / Medium" is always showing as (direct) - or the name of the source domain. Since I am redirecting using PHP header(location:.. etc.) the Google _link method doesn't seem to be working properly - I want to focus on two questions: Should I create a new profile for the checkout domain in Google Analytics? (I am now using the profile ID of the source domain even though I move to the checkout domain, si that OK?) When I'm trying to pass the cookies of the source domain to the checkout domain, I notice that the Google cookies are copied to the new domain (the cookie path is .checkout-domain/) and they have the same values of the original cookies - But for some reason another set of cookies is created once I access a page with google analytics code in the checkout pages, with different values (same path). Feels like I'm doing something wrong here, so my question is - What am I doing wrong here? Does anyone have an idea how to pass the cookies to the checkout domain?

    Read the article

  • Which tools should be used for data migration between environments?

    - by Paula Speranza-Hadley
    Ø  With the Oracle Utilities Application Framework based products there are a number of tools provided that can be used to transfer data from one environment to another. Ø  There are three main tools that implementations use: §  ConfigLab - A configurable copy facility is metadata aware and therefore understands the relationships between objects and by invoking the relevant maintenance objects validates the data copied. This utility uses the object validation to help ensure data integrity. Basically it is a set of configuration tables and a set of batch jobs to perform the migration of data. §  Bundling - A configurable release management tool that allows exporting of Advanced Configuration Environment based objects (business services, business objects, UI Maps etc) from one environment to another. §  Blueprint - An Oracle Utilities Software Development Kit (SDK) based tool to import metadata from the development environment to your initial testing environment. The utility is command line based and basically uses a text based configuration file to drive the utility on the source and target sides. Ø  Each tool has a role in an implementation but you must be careful to use the right tool for the right job within an implementation. The suggestions are as follows: §  Only use the Blueprint tool for migrating data from your development platform to your initial test environment. The blueprint tool is not designed to move large amounts of data and certainly is risky, if not used correctly, and can potentially break the integrity of your data. §  The SDK provides the configuration data that it is used for (mainly meta-data). This should not be extended as, while it can perform data migration on any data, it is not efficient and risky for certain types of configuration data. Ø  Additional information can be found in the following whitepaper:  Oracle Utilities Application Framework - Release Management - Software Configuration Management on MyOracle.com

    Read the article

  • DAO/Webservice Consumption in Web Application

    - by Gavin
    I am currently working on converting a "legacy" web-based (Coldfusion) application from single data source (MSSQL database) to multi-tier OOP. In my current system there is a read/write database with all the usual stuff and additional "read-only" databases that are exported daily/hourly from an Enterprise Resource Planning (ERP) system by SSIS jobs with business product/item and manufacturing/SCM planning data. The reason I have the opportunity and need to convert to multi-tier OOP is a newer more modern ERP system is being implemented business wide that will be a complete replacement. This newer ERP system offers several interfaces for third party applications like mine, from direct SQL access to either a dotNet web-service or a SOAP-like web-service. I have found several suitable frameworks I would be happy to use (Coldspring, FW/1) but I am not sure what design patterns apply to my data access object/component and how to manage the connection/session tokens, with this background, my question has the following three parts: Firstly I have concerns with moving from the relative safety of a SSIS job that protects me from downtime and speed of the ERP system to directly connecting with one of the web services which I note seem significantly slower than I expected (simple/small requests often take up to a whole second). Are there any design patterns I can investigate/use to cache/protect my data tier? It is my understanding data access objects (the component that connects directly with the web services and convert them into the data types I can then work with in my Domain Objects) should be singletons (and will act as an Adapter/Facade), am I correct? As part of the data access object I have to setup a connection by username/password (I could set up multiple users and/or connect multiple times with this) which responds with a session token that needs to be provided on every subsequent request. Do I do this once and share it across the whole application, do I setup a new "connection" for every user of my application and keep the token in their session scope (might quickly hit licensing limits), do I set the "connection" up per page request, or is there a design pattern I am missing that can manage multiple "connections" where a requests/access uses the first free "connection"? It is worth noting if the ERP system dies I will need to reset/invalidate all the connections and start from scratch, and depending on which web-service I use might need manually close the "connection/session"

    Read the article

  • Java SE 7u10: Enhanced Security Features and Support for New Platforms

    - by Tori Wieldt
    On December 11, 2012 Oracle released Java SE 7 Update 10 (Java SE 7u10). This release includes enhanced security features and support for new platforms. Enhanced Security Features The JDK 7u10 release includes the following security enhancements: The ability to disable any Java application from running in the browser. This mode can be set in the Java Control Panel or (on Microsoft Windows platform only) using a command-line install argument. The ability to select the desired level of security for unsigned applets, Java Web Start applications, and embedded JavaFX applications that run in a browser. Four levels of security are supported. This feature can be set in the Java Control Panel or (on Microsoft Windows platform only) using a command-line install argument. New dialogs to warn you when the JRE is insecure (either expired or below the security baseline) and needs to be updated. For more information, read Henrik Stahl's blog Oracle JDK 7u10 Released with New Security and the documentation Setting the Level of Security for the Java Client. New Supported Platforms Java SE 7 Update 10 (Java SE 7u10) supports Windows 8 Desktop Mode1 with IE 10, and Mac OS 10.8.? For more information, refer to the Oracle Certified System Configurations page.  Download and Release Notes Java SE 7u10 is available on OTN Download Page. To learn more about the release, please see the Java SE 7u10 Release Notes. For information about the other Java releases last week, read the Java Source blog "Java SE Updates." 

    Read the article

  • How do I boot into console mode (redux)

    - by Leo Simon
    I'm running Ubuntu 12.04. This question was asked some time ago How do I disable the boot splash screen? but the answers didn't work for me. The standard way to boot into console mode used to be to edit /etc/default/grub and set GRUB_CMDLINE_LINUX_DEFAULT="text" This worked fine until I ran the fix proposed in https://help.ubuntu.com/community/SoundTroubleshootingProcedure in order to get sound to work. Since then, I have disabled the boot-splash-screen, but I can avoid what I presume is the lightdm login prompt screen. All I want to do is disable this gui and be prompted with a console login prompt. (Shouldnt be so hard should it???) I read in three 33416 mentioned above that there was a bug in lightdm (it wasn't recognizing "text" properly as an option for GRUB_CMDLINE_LINUX_DEFAULT.) But this discussion happened more than a year ago, and it's surely been fixed. Yet my lightdm is uptodate (so I'm told when I try to update it with apt-get). As suggested in one of the above, I tried sudo update-rc.d -f lightdm remove which resulted in a hung machine. I managed to recover using recovery mode, but now I still get the gui again. Another suggestion is to edit /etc/init/lightdm.override. I've done this and set it to "manual" as suggested, but lightdm simply ignores this. Could somebody suggest how to proceed please? Thanks very much, Leo

    Read the article

  • internet sharing over wifi between ubuntu 11.10 and windows7

    - by Vivek Pradhan
    So i have looked up a lot of forums for these solution but haven't really found one that works. I have a laptop running ubuntu 11.10 connected to the ethernet cord at home and i want to share the internet over wifi with my friend's laptop running windows7. I did not think it would be so difficult, I tried a lot of things: I went to networks and then wireless and set up a wifi hotspot, my laptop got connected to it and the ipv4 was set to "shared to other computers". Thankfully the network was discoverable and after some tries my friend was able to connect to the network, but it still showed that there was no internet access. I tried coniguring the tcp addresses of the wifi on his laptop. Bottom line: did not work. I went to the network manager, clicked on create a new wireless network, created one with security WEP 40/128 bit passphrase, tried the other 2 options later, and did the same thing as with the wifi, this network was also not discoverable initially and after some tries, we could connect to it but then ICS was not working although there was a working internet on my ubuntu laptop. I would really appreciate if some one who has faced a similar problem and got it fixed to please give me a step by step solution of how to get this work, because this is a prety common problem with ubuntu distros I have noticed. Note: This however seems to work with ubuntu to ubuntu connections, but specifically cross OS connections like windows or my phone running android ICS are not able to see or if connect not able to share internet on my laptop

    Read the article

  • Agile Testing Days 2012 – Day 2 – Learn through disagreement

    - by Chris George
    I think I was in the right place! During Day 1 I kept on reading tweets about Lean Coffee that has happened earlier that morning. It intrigued me and I figured in for a penny in for a pound, and set my alarm for 6:45am. Following the award night the night before, it was _really_ hard getting up when it went off, but I did and after a very early breakfast, set off for the 10 min walk to the Dorint. With Lean Coffee due to start at 07:30, I arrived at the hotel and made my way to one of the hotel bars. I soon realised I was in the right place as although the bar was empty, there was a table with post-it’s and pens! This MUST be the place! The premise of Lean Coffee is to have several small timeboxed discussions. Everyone writes down what they would like to discuss on post-its that are then briefly explained and submitted to the pile. Once everyone is done, the group dot-votes on the topics. The topics are then sorted by the dot vote counts and the discussions begin. Each discussion had 8 mins to start with, which meant it prevented the discussions getting off topic too much. After the time elapsed, the group had a vote whether to extend the discussion by a further 4 mins or move on. Several discussion were had around training, soft skills etc. The conversations were really interesting and there were quite a few good ideas. Overall it was a very enjoyable experience, certainly worth the early start! Make Melly Happy Following Lean Coffee was real coffee, and much needed that was! The first keynote of the day was “Let’s help Melly (Changing Work into Life)”by Jurgen Appelo. Draw lines to track happiness This was a very interesting presentation, and set the day nicely. The theme to the keynote was projects are about the people, more-so than the actual tasks. So he started by showing a photo of an employee ‘Melly’ who looked happy enough. He then stated that she looked happy but actually hated her job. In fact 50% of Americans hate their jobs. He went on to say that the world over 50% of people hate Americans their jobs. Jurgen talked about many ways to reduce the feedback cycle, not only of the project, but of the people management. Ideas such as Happiness doors, happiness tracking (drawing lines on a wall indicating your happiness for that day), kudo boxes (to compliment a colleague for good work). All of these (and more) ideas stimulate conversation amongst the team, lead to early detection of issues and investigation of solutions. I’ve massively simplified Jurgen’s keynote and have certainly not done it justice, so I will post a link to the video once it’s available. Following more coffee, the next talk was “How releasing faster changes testing” by Alexander Schwartz. This is a topic very close to our hearts at the moment, so I was eager to find out any juicy morsels that could help us achieve more frequent releases, and Alex did not disappoint. He started off by confirming something that I have been a firm believer in for a number of years now; adding more people can do more harm than good when trying to release. This is for a number of reasons, but just adding new people to a team at such a critical time can be more of a drain on resources than they add. The alternative is to have the whole team have shared responsibility for faster delivery. So the whole team is responsible for quality and testing. Obviously you will have the test engineers on the project who have the specialist skills, but there is no reason that the entire team cannot do exploratory testing on the product. This links nicely with the Developer Exploratory testing presented by Sigge on Day 1, and certainly something that my team are really striving towards. Focus on cycle time, so what can be done to reduce the time between dev cycles, release cycles. What’s stops a release, what delays a release? all good solid questions that can be answered. Alex suggested that perhaps the product doesn’t need to be fully tested. Doing less testing will reduce the cycle time therefore get the release out faster. He suggested a risk-based approach to planning what testing needs to happen. Reducing testing could have an impact on revenue if it causes harm to customers, so test the ‘right stuff’! Determine a set of tests that are ‘face saving’ or ‘smoke’ tests. These tests cover the core functionality of the product and aim to prevent major embarrassment if these areas were to fail! Amongst many other very good points, Alex suggested that a good approach would be to release after every new feature is added. So do a bit of work -> release, do some more work -> release. By releasing small increments of work, the impact on the customer of bugs being introduced is reduced. Red Pill, Blue Pill The second keynote of the day was “Adaptation and improvisation – but your weakness is not your technique” by Markus Gartner and proved to be another very good presentation. It started off quoting lines from the Matrix which relate to adapting, improvising, realisation and mastery. It has alot of nerds in the room smiling! Markus went on to explain how through deliberate practice ( and a lot of it!) you can achieve mastery, but then you never stop learning. Through methods such as code retreats, testing dojos, workshops you can continually improve and learn. The code retreat idea was one that interested me. It involved pairing to write an automated test for, say, 45 mins, they deleting all the code, finding a different partner and writing the same test again! This is another keynote where the video will speak louder than anything I can write here! Markus did elaborate on something that Lisa and Janet had touched on yesterday whilst busting the myth that “Testers Must Code”. Whilst it is true that to be a tester, you don’t need to code, it is becoming more common that there is this crossover happening where more testers are coding and more programmers are testing. Markus made a special distinction between programmers and developers as testers develop tests code so this helped to make that clear. “Extending Continuous Integration and TDD with Continuous Testing” by Jason Ayers was my next talk after lunch. We already do CI and a bit of TDD on my project team so I was interested to see what this continuous testing thing was all about and whether it would actually work for us. At the start of the presentation I was of the opinion that it just would not work for us because our tests are too slow, and that would be the case for many people. Jason started off by setting the scene and saying that those doing TDD spend between 10-15% of their time waiting for tests to run. This can be reduced by testing less often, reducing the test time but this then increases the risk of introduced bugs not being spotted quickly. Therefore, in comes Continuous Testing (CT). CT systems run your unit tests whenever you save some code and runs them in the background so you can continue working. This is a really nice idea, but to do this, your tests must be fast, independent and reliable. The latter two should be the case anyway, and the first is ideal, but hard! Jason makes several suggestions to make tests fast. Firstly keep the scope of the test small, secondly spin off any expensive tests into a suite which is run, perhaps, overnight or outside of the CT system at any rate. So this started to change my mind, perhaps we could re-engineer our tests, and continuously run the quick ones to give an element of coverage. This talk was very interesting and I’ve already tried a couple of the tools mentioned on our product (Mighty Moose and NCrunch). Sadly due to the way our solution is built, it currently doesn’t work, but we will look at whether we can make this work because this has the potential to be a mini-game-changer for us. Using the wrong data Gojko’s Hierarchy of Quality The final keynote of the day was “Reinventing software quality” by Gojko Adzic. He opened the talk with the statement “We’ve got quality wrong because we are using the wrong data”! Gojko then went on to explain that we should judge a bug by whether the customer cares about it, not by whether we think it’s important. Why spend time fixing issues that the customer just wouldn’t care about and releasing months later because of this? Surely it’s better to release now and get customer feedback? This was another reference to the idea of how it’s better to build the right thing wrong than the wrong thing right. Get feedback early to make sure you’re making the right thing. Gojko then showed something which was very analogous to Maslow’s heirachy of needs. Successful – does it contribute to the business? Useful – does it do what the user wants Usable – does it do what it’s supposed to without breaking Performant/Secure – is it secure/is the performance acceptable Deployable Functionally ok – can it be deployed without breaking? He then explained that User Stories should focus on change. In other words they should focus on the users needs, not the users process. Describe what the change will be, how that change will happen then measure it! Networking and Beer Following the day’s closing keynote, there were drinks and nibble for the ‘Networking’ evening. This was a great opportunity to talk to people. I find approaching strangers very uncomfortable but once again, when in Rome! Pete Walen and I had a long conversation about only fixing issues that the customer cares about versus fixing issues that make you proud of your software! Without saying much, and asking the right questions, Pete made me re-evaluate my thoughts on the matter. Clever, very clever!  Oh and he ‘bought’ me a beer! My Takeaway Triple from Day 2: release small and release often to minimize issues creeping in and get faster feedback from ‘the real world’ Focus on issues that the customers care about, not what we think is important It’s okay to disagree with someone, even if they are well respected agile testing gurus, that’s how discussion and learning happens!  

    Read the article

  • ASP.NET ViewState Tips and Tricks #1

    - by João Angelo
    In User Controls or Custom Controls DO NOT use ViewState to store non public properties. Persisting non public properties in ViewState results in loss of functionality if the Page hosting the controls has ViewState disabled since it can no longer reset values of non public properties on page load. Example: public class ExampleControl : WebControl { private const string PublicViewStateKey = "Example_Public"; private const string NonPublicViewStateKey = "Example_NonPublic"; // DO public int Public { get { object o = this.ViewState[PublicViewStateKey]; if (o == null) return default(int); return (int)o; } set { this.ViewState[PublicViewStateKey] = value; } } // DO NOT private int NonPublic { get { object o = this.ViewState[NonPublicViewStateKey]; if (o == null) return default(int); return (int)o; } set { this.ViewState[NonPublicViewStateKey] = value; } } } // Page with ViewState disabled public partial class ExamplePage : Page { protected override void OnLoad(EventArgs e) { base.OnLoad(e); this.Example.Public = 10; // Restore Public value this.Example.NonPublic = 20; // Compile Error! } }

    Read the article

  • Rotate around the centre of the screen

    - by Dan Scott
    I want my camera to rotate around the centre of screen and I'm not sure how to achieve that. I have a rotation in the camera but I'm not sure what its rotating around. (I think it might be rotating around the position.X of camera, not sure) If you look at these two images: http://imgur.com/E9qoAM7,5qzyhGD#0 http://imgur.com/E9qoAM7,5qzyhGD#1 The first one shows how the camera is normally, and the second shows how I want the level to look when I would rotate the camera 90 degrees left or right. My camera: public class Camera { private Matrix transform; public Matrix Transform { get { return transform; } } private Vector2 position; public Vector2 Position { get { return position; } set { position = value; } } private float rotation; public float Rotation { get { return rotation; } set { rotation = value; } } private Viewport viewPort; public Camera(Viewport newView) { viewPort = newView; } public void Update(Player player) { position.X = player.PlayerPos.X + (player.PlayerRect.Width / 2) - viewPort.Width / 4; if (position.X < 0) position.X = 0; transform = Matrix.CreateTranslation(new Vector3(-position, 0)) * Matrix.CreateRotationZ(Rotation); if (Keyboard.GetState().IsKeyDown(Keys.D)) { rotation += 0.01f; } if (Keyboard.GetState().IsKeyDown(Keys.A)) { rotation -= 0.01f; } } } (I'm assuming you would need to rotate around the centre of the screen to achieve this)

    Read the article

  • Reading a large SQL Errorlog

    - by steveh99999
    I came across an interesting situation recently where a SQL instance had been configured with the Audit of successful and failed logins being written to the errorlog. ie This meant… every time a user or the application connected to the SQL instance – an entry was written to the errorlog. This meant…  huge SQL Server errorlogs. Opening an errorlog in the usual way, using SQL management studio, was extremely slow… Luckily, I was able to use xp_readerrorlog to work around this – here’s some example queries..   To show errorlog entries from the currently active log, just for today :- DECLARE @now DATETIME DECLARE @midnight DATETIME SET @now = GETDATE() SET @midnight =  DATEADD(d, DATEDIFF(d, 0, getdate()), 0) EXEC xp_readerrorlog 0,1,NULL,NULL,@midnight,@now   To find out how big the current errorlog actually is, and what the earliest and most recent entries are in the errorlog :- CREATE TABLE #temp_errorlog (Logdate DATETIME, ProcessInfo VARCHAR(20),Text VARCHAR(4000)) INSERT INTO #temp_errorlog EXEC xp_readerrorlog 0 -- for current errorlog SELECT COUNT(*) AS 'Number of entries in errorlog', MIN(logdate) AS 'ErrorLog Starts', MAX(logdate) AS 'ErrorLog Ends' FROM #temp_errorlog DROP TABLE #temp_errorlog To show just DBCC history  information in the current errorlog :- EXEC xp_readerrorlog 0,1,'dbcc'   To show backup errorlog entries in the current errorlog :- CREATE TABLE #temp_errorlog (Logdate DATETIME, ProcessInfo VARCHAR(20),Text VARCHAR(4000)) INSERT INTO #temp_errorlog EXEC xp_readerrorlog 0 -- for current errorlog SELECT * from #temp_errorlog WHERE ProcessInfo = 'Backup' ORDER BY Logdate DROP TABLE #temp_errorlog XP_Errorlog is an undocumented system stored procedure – so no official Microsoft link describing the parameters it takes – however,  there’s a good blog on this here And, if you do have a problem with huge errorlogs – please consider running system stored procedure  sp_cycle_errorlog on a nightly or regular basis.  But if you do this,  remember to change the amount of errorlogs you do retain – the default of 6 might not be sufficient for you….

    Read the article

  • 8-Puzzle Solution executes infinitely [migrated]

    - by Ashwin
    I am looking for a solution to 8-puzzle problem using the A* Algorithm. I found this project on the internet. Please see the files - proj1 and EightPuzzle. The proj1 contains the entry point for the program(the main() function) and EightPuzzle describes a particular state of the puzzle. Each state is an object of the 8-puzzle. I feel that there is nothing wrong in the logic. But it loops forever for these two inputs that I have tried : {8,2,7,5,1,6,3,0,4} and {3,1,6,8,4,5,7,2,0}. Both of them are valid input states. What is wrong with the code? Note For better viewing copy the code in a Notepad++ or some other text editor(which has the capability to recognize java source file) because there are lot of comments in the code. Since A* requires a heuristic, they have provided the option of using manhattan distance and a heuristic that calculates the number of misplaced tiles. And to ensure that the best heuristic is executed first, they have implemented a PriorityQueue. The compareTo() function is implemented in the EightPuzzle class. The input to the program can be changed by changing the value of p1d in the main() function of proj1 class. The reason I am telling that there exists solution for the two my above inputs is because the applet here solves them. Please ensure that you select 8-puzzle from teh options in the applet. EDITI gave this input {0,5,7,6,8,1,2,4,3}. It took about 10 seconds and gave a result with 26 moves. But the applet gave a result with 24 moves in 0.0001 seconds with A*. For quick reference I have pasted the the two classes without the comments : EightPuzzle import java.util.*; public class EightPuzzle implements Comparable <Object> { int[] puzzle = new int[9]; int h_n= 0; int hueristic_type = 0; int g_n = 0; int f_n = 0; EightPuzzle parent = null; public EightPuzzle(int[] p, int h_type, int cost) { this.puzzle = p; this.hueristic_type = h_type; this.h_n = (h_type == 1) ? h1(p) : h2(p); this.g_n = cost; this.f_n = h_n + g_n; } public int getF_n() { return f_n; } public void setParent(EightPuzzle input) { this.parent = input; } public EightPuzzle getParent() { return this.parent; } public int inversions() { /* * Definition: For any other configuration besides the goal, * whenever a tile with a greater number on it precedes a * tile with a smaller number, the two tiles are said to be inverted */ int inversion = 0; for(int i = 0; i < this.puzzle.length; i++ ) { for(int j = 0; j < i; j++) { if(this.puzzle[i] != 0 && this.puzzle[j] != 0) { if(this.puzzle[i] < this.puzzle[j]) inversion++; } } } return inversion; } public int h1(int[] list) // h1 = the number of misplaced tiles { int gn = 0; for(int i = 0; i < list.length; i++) { if(list[i] != i && list[i] != 0) gn++; } return gn; } public LinkedList<EightPuzzle> getChildren() { LinkedList<EightPuzzle> children = new LinkedList<EightPuzzle>(); int loc = 0; int temparray[] = new int[this.puzzle.length]; EightPuzzle rightP, upP, downP, leftP; while(this.puzzle[loc] != 0) { loc++; } if(loc % 3 == 0){ temparray = this.puzzle.clone(); temparray[loc] = temparray[loc + 1]; temparray[loc + 1] = 0; rightP = new EightPuzzle(temparray, this.hueristic_type, this.g_n + 1); rightP.setParent(this); children.add(rightP); }else if(loc % 3 == 1){ //add one child swaps with right temparray = this.puzzle.clone(); temparray[loc] = temparray[loc + 1]; temparray[loc + 1] = 0; rightP = new EightPuzzle(temparray, this.hueristic_type, this.g_n + 1); rightP.setParent(this); children.add(rightP); //add one child swaps with left temparray = this.puzzle.clone(); temparray[loc] = temparray[loc - 1]; temparray[loc - 1] = 0; leftP = new EightPuzzle(temparray, this.hueristic_type, this.g_n + 1); leftP.setParent(this); children.add(leftP); }else if(loc % 3 == 2){ // add one child swaps with left temparray = this.puzzle.clone(); temparray[loc] = temparray[loc - 1]; temparray[loc - 1] = 0; leftP = new EightPuzzle(temparray, this.hueristic_type, this.g_n + 1); leftP.setParent(this); children.add(leftP); } if(loc / 3 == 0){ //add one child swaps with lower temparray = this.puzzle.clone(); temparray[loc] = temparray[loc + 3]; temparray[loc + 3] = 0; downP = new EightPuzzle(temparray, this.hueristic_type, this.g_n + 1); downP.setParent(this); children.add(downP); }else if(loc / 3 == 1 ){ //add one child, swap with upper temparray = this.puzzle.clone(); temparray[loc] = temparray[loc - 3]; temparray[loc - 3] = 0; upP = new EightPuzzle(temparray, this.hueristic_type, this.g_n + 1); upP.setParent(this); children.add(upP); //add one child, swap with lower temparray = this.puzzle.clone(); temparray[loc] = temparray[loc + 3]; temparray[loc + 3] = 0; downP = new EightPuzzle(temparray, this.hueristic_type, this.g_n + 1); downP.setParent(this); children.add(downP); }else if (loc / 3 == 2 ){ //add one child, swap with upper temparray = this.puzzle.clone(); temparray[loc] = temparray[loc - 3]; temparray[loc - 3] = 0; upP = new EightPuzzle(temparray, this.hueristic_type, this.g_n + 1); upP.setParent(this); children.add(upP); } return children; } public int h2(int[] list) // h2 = the sum of the distances of the tiles from their goal positions // for each item find its goal position // calculate how many positions it needs to move to get into that position { int gn = 0; int row = 0; int col = 0; for(int i = 0; i < list.length; i++) { if(list[i] != 0) { row = list[i] / 3; col = list[i] % 3; row = Math.abs(row - (i / 3)); col = Math.abs(col - (i % 3)); gn += row; gn += col; } } return gn; } public String toString() { String x = ""; for(int i = 0; i < this.puzzle.length; i++){ x += puzzle[i] + " "; if((i + 1) % 3 == 0) x += "\n"; } return x; } public int compareTo(Object input) { if (this.f_n < ((EightPuzzle) input).getF_n()) return -1; else if (this.f_n > ((EightPuzzle) input).getF_n()) return 1; return 0; } public boolean equals(EightPuzzle test){ if(this.f_n != test.getF_n()) return false; for(int i = 0 ; i < this.puzzle.length; i++) { if(this.puzzle[i] != test.puzzle[i]) return false; } return true; } public boolean mapEquals(EightPuzzle test){ for(int i = 0 ; i < this.puzzle.length; i++) { if(this.puzzle[i] != test.puzzle[i]) return false; } return true; } } proj1 import java.util.*; public class proj1 { /** * @param args */ public static void main(String[] args) { int[] p1d = {1, 4, 2, 3, 0, 5, 6, 7, 8}; int hueristic = 2; EightPuzzle start = new EightPuzzle(p1d, hueristic, 0); int[] win = { 0, 1, 2, 3, 4, 5, 6, 7, 8}; EightPuzzle goal = new EightPuzzle(win, hueristic, 0); astar(start, goal); } public static void astar(EightPuzzle start, EightPuzzle goal) { if(start.inversions() % 2 == 1) { System.out.println("Unsolvable"); return; } // function A*(start,goal) // closedset := the empty set // The set of nodes already evaluated. LinkedList<EightPuzzle> closedset = new LinkedList<EightPuzzle>(); // openset := set containing the initial node // The set of tentative nodes to be evaluated. priority queue PriorityQueue<EightPuzzle> openset = new PriorityQueue<EightPuzzle>(); openset.add(start); while(openset.size() > 0){ // x := the node in openset having the lowest f_score[] value EightPuzzle x = openset.peek(); // if x = goal if(x.mapEquals(goal)) { // return reconstruct_path(came_from, came_from[goal]) Stack<EightPuzzle> toDisplay = reconstruct(x); System.out.println("Printing solution... "); System.out.println(start.toString()); print(toDisplay); return; } // remove x from openset // add x to closedset closedset.add(openset.poll()); LinkedList <EightPuzzle> neighbor = x.getChildren(); // foreach y in neighbor_nodes(x) while(neighbor.size() > 0) { EightPuzzle y = neighbor.removeFirst(); // if y in closedset if(closedset.contains(y)){ // continue continue; } // tentative_g_score := g_score[x] + dist_between(x,y) // // if y not in openset if(!closedset.contains(y)){ // add y to openset openset.add(y); // } // } // } } public static void print(Stack<EightPuzzle> x) { while(!x.isEmpty()) { EightPuzzle temp = x.pop(); System.out.println(temp.toString()); } } public static Stack<EightPuzzle> reconstruct(EightPuzzle winner) { Stack<EightPuzzle> correctOutput = new Stack<EightPuzzle>(); while(winner.getParent() != null) { correctOutput.add(winner); winner = winner.getParent(); } return correctOutput; } }

    Read the article

  • changing body type without change of center of mass

    - by philipp
    I have an box2d project with some bodies in it, which move around without any user interaction. But if the user selects one of the bodies, he should be able to move it around just like he wants to. To keep it short, I want to change the type of the body to "kinematic" while the user controls it and back to "dynamic" afterwards. If I do so the rotation center of the body changes with the change of the type. How can I reset this? The body's fixture is created of a single b2PolygonShape, with its vertices set via SetAsArray(). Greetings philipp EDIT:: So I looked around about setting the local center of bodies. what brought me to this solution: var md = new b2MassData(); this.body.GetMassData( md ); this.body.SetType( b2body.b2_kinematicBody ); this.body.SetMassData( md ); that did not work, so I had a look at the source and found that SetMassData() always returns if the body is not "dynamic". So I tried this: var md = new b2MassData(); this._body.GetMassData( md ); this._body.SetType( b2Body.b2_kinematicBody ); this._body.m_sweep.localCenter.Set( md.center.x, md.center.y ); what actually is modifying the private data of the body. But it works and no errors appear, but can I really do this without the risk of breaking the application, or in other words, under which circumstances could this solution might cause errors? n.b.: I am using box2dweb of the latest release. Greetings philipp

    Read the article

  • Dealing with 2D pixel shaders and SpriteBatches in XNA 4.0 component-object game engine?

    - by DaveStance
    I've got a bit of experience with shaders in general, having implemented a couple, very simple, 3D fragment and vertex shaders in OpenGL/WebGL in the past. Currently, I'm working on a 2D game engine in XNA 4.0 and I'm struggling with the process of integrating per-object and full-scene shaders in my current architecture. I'm using a component-entity design, wherein my "Entities" are merely collections of components that are acted upon by discreet system managers (SpatialProvider, SceneProvider, etc). In the context of this question, my draw call looks something like this: SceneProvider::Draw(GameTime) calls... ComponentManager::Draw(GameTime, SpriteBatch) which calls (on each drawable component) DrawnComponent::Draw(GameTime, SpriteBatch) The SpriteBatch is set up, with the default SpriteBatch shader, in the SceneProvider class just before it tells the ComponentManager to start rendering the scene. From my understanding, if a component needs to use a special shader to draw itself, it must do the following when it's Draw(GameTime, SpriteBatch) method is invoked: public void Draw(GameTime gameTime, SpriteBatch spriteBatch) { spriteBatch.End(); spriteBatch.Begin(SpriteSortMode.Immediate, BlendState.AlphaBlend, null, null, null, EffectShader, ViewMatrix); // Draw things here that are shaded by the "EffectShader." spriteBatch.End(); spriteBatch.Begin(/* same settings that were set by SceneProvider to ensure the rest of the scene is rendered normally */); } My question is, having been told that numerous calls to SpriteBatch.Begin() and SpriteBatch.End() within a single frame was terrible for performance, is there a better way to do this? Is there a way to instruct the currently running SpriteBatch to simply change the Effect shader it is using for this particular draw call and then switch it back before the function ends?

    Read the article

  • OBIEE 11.1.1 - How to enable HTTP compression and caching in Oracle iPlanet Web Server

    - by Ahmed Awan
    1. To implement HTTP compression / caching, install and configure Oracle iPlanet Web Server 7.0.x for the bi_serverN Managed Servers (refer to document http://docs.oracle.com/cd/E23943_01/web.1111/e16435/iplanet.htm) 2. On the Oracle iPlanet Web Server machine, open the file Administrator's Configuration (obj.conf) for editing. (Guidelines for modifying the obj.conf file is available at http://download.oracle.com/docs/cd/E19146-01/821-1827/821-1827.pdf) 3. Add the following lines in obj.conf file inside <Object name="default"> . </Object> and restart the Oracle iPlanet Web Server machine: #HTTP Caching <If $path =~ '^(.*)\.(jpg|jpeg|gif|png|css|js)$'> ObjectType fn="set-variable" insert-srvhdrs="Expires:$(httpdate($time + 864000))" </If>   <If $path =~ '^(.*)\.(jpg|jpeg|gif|png|css|js)$'> PathCheck fn="set-cache-control" control="public,max-age=864000" </If>   #HTTP Compression   Output fn="insert-filter" filter="http-compression" vary="false" compression-level="9" fragment_size="8096"

    Read the article

  • Test Data in a Distributed System

    - by Davin Tryon
    A question that has been vexing me lately has been about how to effectively test (end-to-end) features in a distributed system. Particuarly, how to effectively manage (through time) test data for feature testing. The system in question is a typical SOA setup. The composition is done in JavaScript when call to several REST APIs. Each service is built as an independent block. Each service has some kind of persistent storage (SQL Server in most cases). The main issue at the moment is how to approach test data when testing end-to-end features. Functional end-to-end testing occurs through the UI, and it is therefore necessary for test data to be set up before the test run (this could be manual or automated testing). As is typical in a distributed system, identifiers from one service are used as a link in another service. So, some level of synchronization needs to be present in the data to effectively test. What is the best way to manage and set up this data after a successful deployment to a test environment? For example, is it better to manage this test data inside each service? Or package it together with the testing suite? Does that testing suite exist as a separate project? I'm interested in design guidance about how to store and manage this test data as the application features evolve.

    Read the article

  • PHP MYSQL loop to check if LicenseID Values are contained in mysql DB [closed]

    - by Jasper
    I have some troubles to find the right loop to check if some values are contained in mysql DB. I'm making a software and I want to add license ID. Each user has x keys to use. Now when the user start the client, it invokes a PHP page that check if the Key sent in the POST method is stored in DB or not. If that key isn't store than I need to check the number of his keys. If it's than X I'll ban him otherwise i add the new keys in the DB. I'm new with PHP and MYSQL. I wrote this code and I would know if I can improve it. <?php $user = POST METHOD $licenseID = POST METHOD $resultLic= mysql_query("SELECT id , idUser , idLicense FROM license WHERE idUser = '$user'") or die(mysql_error()); $resultNumber = mysql_num_rows($resultLic); $keyFound = '0'; // If keyfound is 1 the key is stored in DB while ($rows = mysql_fetch_array($resultLic,MYSQL_BOTH)) { //this loop check if the $licenseID is stored in DB or not for($i=0; $i< $resultNumber ; i++) { if($rows['idLicense'] === $licenseID) { //Just for the debug echo("License Found"); $keyFound = '1'; break; } //If key isn't in DB and there are less than 3 keys the new key will be store in DB if($keyfound == '0' && $resultNumber < 3) { mysql_query( Update users set ...Store $licenseID in Table) } // Else mean that the user want user another generated key (from the client) in the DB and i will be ban (It's wrote in TOS terms that they cant use the software on more than 3 different station) else { mysql_query( update users set ban ='1'.....etc ); } } ?> I know that this code seems really bad so i would know how i can improve it. Someone Could give me any advice? I choose to have 2 tables: users where all information about the users is, with fields id, username, password and another table license with fields id, idUsername, idLicense (the last one store license that the software generate)

    Read the article

< Previous Page | 761 762 763 764 765 766 767 768 769 770 771 772  | Next Page >