Search Results

Search found 28301 results on 1133 pages for 'external process'.

Page 766/1133 | < Previous Page | 762 763 764 765 766 767 768 769 770 771 772 773  | Next Page >

• Streaming to PS3 with NAS and built-in dlna server?

  - by philt

  With consumer-grade hardware, is it possible to successfully stream 1080p mp4 videos to a PS3? I have a linksys router that can only do 10/100. The PS3 is wired to it with cat5e cable, and the PS3 itself supports gigabit ethernet. I would upgrade the router and get one that supports gigabit ethernet if it could handle streaming like this. It currently does work with minor jerkiness streaming from my mac to the PS3, but fast-forward/reverse and "goto" (equivalent of scene selection) take forever and/or fail completely. And streaming from my mac of course requires the mac to be on at all times. When I put the movies on an external USB drive and connect to the PS3 directly, it performs flawlessly. Fast forward and everything works great. So I was thinking about getting a NAS, but I don't know if any inexpensive NAS (i.e. Buffalo Linkstation Live, WD My Book World Edition, D-Link DNS-321, etc.) can actually deliver the performance necessary to do this, even with gigabit ethernet?

  Read the article

• Regarding traffic shaping on juniper SRX550

  - by peilin

  We have implemented the Juniper SRX550 in our company. Now we have one issue that how to restrict the internal user download speed from internet. Take one example that i want to restrict the end user with IP:192.168.1.20/32 downloading speed up to 1M via my external port ge-0/0/6.0. Below is my setting: [edit firewall policer p1M] root@SRX550# show if-exceeding { bandwidth-limit 1m; burst-size-limit 15k; } then discard; [edit firewall family inet] root@SRX550# show filter limit-user term 10 { from { destination-address { 192.168.1.20/32; } } then policer p1M; } term else { then accept; } [edit interfaces ge-0/0/6] root@SRX550# show per-unit-scheduler; unit 0 { family inet { filter { input limit-user; } address Hidden Here; } } As per the setting, the end user downloading speed should not exceed the 1m (125KB in windows), but the result is the downloading speed for this end users still can up to 400KB via HTTP/HTTPS. Please advise. Thanks.

  Read the article

• I need an admin toolset for Windows 2003 and 2008

  - by eugeneK

  i know this is way too general question but anyway. I need few tools, will write down my tasks as sysadmin and if you have any to automate my job i would be glad to hear. I don't mind paying for software needed unless it is way too expensive. First of i backup all files on server at local/office storage. I 7zip all SQL backup files and then move them over network to centralized location and then FTP them from office PC which has no FTP server installed and cannot have one. Backups happen at 4AM at the morning thus i need to set time for compressing and afterward FTPing. Then i FTP all IIS web application as differentiation backup, same goes for VOD movies. Second tool i need is system monitor which will monitor all servers from themselves and from external location for CPU/Memory/Hard disk and other basic failures. This tool should able to execute Website address with parameters which will send me an email with all report on failure. Third tool i need is a way to get all Event Logs from 10 Windows based servers without accessing each any of them manually. If you know any solution, thanks in advance.

  Read the article

• What is the correct mail set up for multiple domains on one server?

  - by newmarc

  I have a machine (centos 5) with one external ip address. On that machine I have many virtual hosts with a few different top level domain names and sub-domains under those eg. sub1.domain1.com sub2.domain1.com sub3.domain1.com sub1.domain2.com sub2.domain2.com sub1.domain3.com And so on... Alot of these different sites need to send mail as their corresponding domain (or second-level domain at least). I need to set up DKIM, SPF (but that's handled on the DNS) and rDNS lookup so the mail gets received. As I understand it, you can only have one rDNS entry per machine. I could set up a server for each top level domain, but I'm thinking that'll get expensive. What should I do here? Is there a way to have multiple rDNS lookups on one ip address? How do I setup DKIM signing for multiple domain names on the one machine? Are there any services out there that could handle this for me? Thanks for your help...

  Read the article

• Windows Server 2008 R2 RAS VPN: access server on internal interface ip

  - by Mathias

  short question: I'm usually a linux admin but need to setup a Win2k8 R2 server for a student project. The server is running as VM on a root server and has a public internet IP assigned. Additionally I need a VPN server to access some services running on the server. I managed to set up a working VPN gateway via the Routing and RAS service which assigns clients an IP in the private subnet 192.168.88.0/24 with the Interface "Internal" listening on 192.168.88.1. Additionally I set up the external interface as NAT interface. So I can connect to the VPN server, get an IP assigned and the server additionally does NAT and I can access the internet over the VPN connection. The only thing I additionally need, is that I can access the server itself over that internal IP (e.g. client 192.168.88.2, server 192.168.88.1) as I want to access some services which I don't like to expose to the internet and restrict them to connected VPN clients. Does anybody have a hint, which configuration I'm missing here to be able to access the server over the VPN connection? EDIT: VPN clients get assigned the IP from the private subnet with subnetmask 255.255.255.255, I guess that might be the reason I can't access the server on the private IP address although it's in the same network range. Any ideas how to change this? I defined a static address pool in the Routing and RAS service, but I can't change the netmask there. EDIT2: I can't access the server from the client, but I can fully access the client from the server (ping, HTTP). I guess it has to do with firewall configuration. Thanks in advance, Mathias

  Read the article

• How to set up multiple DNS servers on an intranet

  - by Brent

  We have an Active Directory network, with a mixture of Windows DNS, linux BIND servers, and want to use OpenDNS as our external DNS provider. I am wondering What is the best way to set up these servers (regarding forwarders, recursion, etc.)? Active Directory is our main internal DNS for our domain, and has 3 redundant servers. DHCP and all our servers use these as their DNS servers. Then we have a legacy AD server from an old network that is still authoritative for a bunch of domains. Finally, we have a couple of Linux Bind servers that are authoritative for a bunch of websites we host. Should our main AD servers point to our legacy AD server, which points to one of our BIND servers, which points to the other BIND server, which finally points out to openDNS? Or should our main AD servers point to all of these directly? - or is there a better option? What happens if a domain is listed in 2 places? Does DNS process the forwarders in order? What about root servers - if I want to use OpenDNS for "everything else", do I just list them as the last forwarders, and delete the root servers from all my DNS servers? How does recursion work - in this scenario, should I be using recursion or not?

  Read the article

• Route traffic from one VPN to a second VPN

  - by Dominic

  I have set up an OpenVPN server on my windows 7 64-bit PC. I also have a subscription to a VPN service. My aim is to be able to connect my android phone to the VPN server on my PC, and then route all traffic through the VPN service. I have a NetGear WPN824 router. I can get it working if I my phone is on my local network. Then I can connect my phone to the VPN server using the local IP address of my PC. In Network Connection in the control panel, I share the connection used by the VPN service with the connection used by the VPN server. Then when I browse the internet on my phone, all traffic goes through the VPN service. Very nice. But if my phone is outside my local network, so I have to connect my phone to the local VPN using my PC's external IP address, then this method doesn't work. If I connect my PC to the VPN service and then try to connect my phone to my own VPN, it just doesn't connect (the initial TLS handshake times out). If I connect my phone to the local VPN first, then this connection is lost as soon as I connect my PC to the VPN service. Does anybody know how I can get this working? Many thanks Dominic

  Read the article

• Limit the amount of data that can be stored in a folder on Ubuntu Server 12.04?

  - by dougoftheabaci

  I'm in the process of building my first server. It's up, it's running, I'm transferring copious amounts of data away from my horrid little Drobo (DO NOT BUY ONE OF THESE, EVER). However, there's one thing I have yet to do: I'd like to set it up for Time Machine backups as well. I've seen all the guides and I have some idea of how to set the whole thing up, but the issue is that Time Machine will just fill up as much space as you let it. So if I let it lose in my 8 TB zpool it'll slowly consume every last available sector. This, of course, is not acceptable. I have a folder at the root of my zpool called "ZFS Time Machine" and I would like to limit it to 1 TB (all I need for backup purposes). However, I have no idea how to do that. Is this possible? I can continue using a small external hard drive attached via FW800 if I have to but I'd much rather prefer putting everything on my server.

  Read the article

• Exchange 2003: Unrestrict send mail size for specific users / groups?

  - by Kip

  Good (insert appropriate time of day here) SF folks, I have the following situation; We have a message size limit for sending set at 20mb in Global Settings | Message Delivery. We have a limit of 50mb set at an external 3rd party spam vendor. I need to enable some users to be able to send messages that are upwards of around 40mb in size. However, when I set the Sending Message Size Maximum to 50mb within the delivery restrictions of a users exchange properties, it would appear that this does not win. It seems that the lowest value wins for this situation. I need to be able to allow certain users to send messages larger than the 20mb limit, but to have everyone else have the 20mb limit in place. How can I do this? The only way I could see was to raise the limit set in Global Settings | Message Delivery to 50mb and then set everyone elses (bar the people who need increased limit) delivery restrictions max size down. But I cannot see an easy way to do the last bit hence my post here looking for advice. There are valid reasons we need to send mail this size and whilst we are putting together other mechanisms for delivery this data, we still need to get this put in place. Thanks in advance Kip

  Read the article

• How long will a USB key with an OS installed on it last?

  - by Xananax

  I've heard numerous times that installing an OS on a USB key is a bad thing to do, as USBs typically have a certain number of writes before dying, and installing an OS on it will wear it out (unless it's used sporadically for rescue purposes). Nonetheless, I am very tempted to install some flavour of Linux (Ubuntu or Arch, I haven't decided yet) on a small, transportable, USB Key. My problem is, although you read a lot that it's "bad", you are never told how bad. How long would it last (provided, say, a pc that is 24/7 on)? A month? A year? Five years? Is there recipes to make it last longer? Is there any reason beside weariness that should prevent me from attempting this? I mean, if it can be calculated, then I could theoretically shield myself by doing regular backups on another key when the deadline gets close (for example). Notes I am not talking of using a USB as a live CD, but actually installing the OS on it.) When I say "USB Key", I refer to the little USBs with a flash memory, not an external USB hard drive. For the curious, my reason is that I work in a lot of different places, on different PCs, and I have a very customized session, with my own WM, my own key bindings, my own scripts, , a selection of plugins for firefox and chrome, etc, and currently I am synchronizing all this through a mix of dropbox, git, and transporting files on USBs, and and it's becoming a chore. It would be much simpler for me to just plug the USB and mount the hard disk of the PC I am using and use it's processing power without actually needing to install any OS on it.

  Read the article

• Diverting sound output of MCE to SPDIF

  - by Saxtus

  I have an ASUS SupremeFX II audio card (which in fact is an onboard audio riser slot) with the default drivers that are pre-installed by Windows 7 x64 for this card. I am able to manually switch between analog output and SPDIF output by the means of control panel (or external utilities like STADS), a change that affects all applications. The problem is that by doing that every time I am about to launch Windows Media Center, except that it's not that elegant, also makes all other Windows application's sounds to pass through SPDIF too, bypassing analog output completely, blending with what I am watching at Windows Media Center. Is there a way to make SPDIF as the default playback device for Windows Media Center? I know other programs that have a setting like that (foobar2000 for example) working like charm, allowing me to even have different outputs working at the same time (tested with my current card successfully). But when comes to Windows Media Center... it just use what the default playback device is all the time. The only setting that I know of, is under: Settings General Windows Media Center Setup Set Up Your Speakers and what it does is to just change the default playback device for entire system. Please help!

  Read the article

• MS DNS lookup issue

  - by 3molo

  Hi, Got two AD/DNS servers, and on the secondary I can't seem to lookup the external site www.iis.se (or any other hostname that their name servers control). The central firewall at this office allows any any outbound, tcp and udp. The DNS server has no local firewall nor antivirus. My windows client, located in the same subnet as the DNS server can do the lookup by asking the nameservers that are in control of www.iis.se. 'dig NS iis.se' shows iis.se. 2517 IN NS ns2.nic.se. iis.se. 2517 IN NS ns.nic.se. iis.se. 2517 IN NS ns3.nic.se. on AD/DNS server C:\Users\Administratornslookup www.iis.se 212.247.7.228 Server: UnKnown Address: 212.247.7.228 Name: www.iis.se Addresses: 2a00:801:f0:80::80 212.247.7.221 C:\Users\Administratornslookup www.iis.se 194.17.45.54 Server: UnKnown Address: 194.17.45.54 Name: www.iis.se Addresses: 2a00:801:f0:80::80 212.247.7.221 C:\Users\Administratornslookup www.iis.se 212.247.3.83 Server: UnKnown Address: 212.247.3.83 Name: www.iis.se Addresses: 2a00:801:f0:80::80 212.247.7.221 And still: C:\Users\administratornslookup www.iis.se Server: UnKnown Address: 127.0.0.1 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. * Request to UnKnown timed-out

  Read the article

• Windows 7 backup keeps trying to backup non-existent file and folders

  - by Ayusman

  My Windows 7 system backup keeps trying to back up 2 non existent file and one folder. I have double checked that these files do not exist. How does windows 7 try to backup that does not exist and then complain and fails the backup? Here is the messages: Backup encountered a problem while backing up file D:\Non library songs\Klub Arabia. Error:(The system cannot find the file specified. (0x80070002)) Backup encountered a problem while backing up file D:\Non library songs\Klub Arabia 2. Error:(The system cannot find the file specified. (0x80070002)) Backup encountered a problem while backing up file D:\Data\FRIENDS. Error:(The system cannot find the file specified. (0x80070002)) These file/folders may have been there at some point but have since been moved. Any idea how to solve this? Does this mean all other content has been backed up successfully? I have windows 7 professional 64bit and I am backing up my Win7 machine to an external hard drive. Ayusman

  Read the article

• Hard drive had reallocated sectors...but now it magically doesn't! Can I trust it?

  - by rob

  Last week my SMART diagnostics utility, CrystalDiskInfo, reported that the external hard drive that I was saving my backups to had suddenly reported 900+ reallocated sectors. I double-checked to confirm, then ordered a replacement drive. I spent all of this week copying data from that drive to the new drive. But toward the end of the copy, something peculiar happened. CrystalDiskInfo popped up an alert that the reallocated sector count had gone back down to 0. I know that when SMART detects a read error on a block, it adds that block to the current pending reallocation list. If it subsequently is successfully written or read later, it is removed from the list and assumed to be fine, but if a subsequent write fails, it is marked bad and added to the reallocated sector count. What concerns me most is that I've never read anywhere that a sector can be recovered as "good" after it has been marked as a bad sector and remapped. I've just finished running an extended SMART diagnostic, and it found no surface errors. Now I'm doubtful that the manufacturer will honor a warranty claim if the SMART info does not report any problems. Has anyone had this happen? If so, then is the drive, indeed, okay, or should I be concerned about an imminent failure?

  Read the article

• Hyper-V 2008 R2 synthetic networking stops working with linux 2.6.32.15

  - by luxifer

  Hi there, so I thought I'd give Hyper-V on Windows Server 2008 R2 Enterprise a try on my Homeserver (yes, it's legit... got it from msdnaa). First thing to throw at it was my firewall which runs IPFire. This distribution currently uses the kernel version 2.6.32.15 and comes with the Hyper-V drivers. So I enabled them and at first they work just fine but after a few minutes they just fail. There are no packages going in or out anymore until I reboot the VM but sometimes even that won't work so the VM just keeps "Stopping" like forever. Emulated networking works fine but it slow and uses more CPU. That way my firewall routes slower than when running under virtualbox on an atom N270. My server has an E6750; VM is limited to 25%, but that should still outperform this atom CPU especially since it's never going anywhere near 100% CPU load, so give me a break! A quick google search led me to people having the same problem (even with other distributions and kernel versions that include those drivers) but no solution yet... I already found this but I can't quite follow the author on the part where he solved the issue - especially since I need two virtual nics for my firewall distro to work (obviously one internal and one external) What am I missing here?

  Read the article

• Which internet scenario would be better?

  - by JL

  I currently have an 8mbps (down) / 512kbps (up) telephone ADSL solution. I must say the reliability is excellent, and up until now its been the fastest connection I could get because I don't live in a cable zone. The real speed of my connection is around 7mbps, but sometimes I manage to get the full 8mbps. I use my connection for work, so it needs to be at least 99% reliable. Recently I was told by a guy who lives up the road that he has a wireless connection with an external antenna and his speeds are 20mbps / 512kbps - he's also paying about 1/2 of what I pay for my wired telephone connection. My question is, is wireless internet good enough for a power user who uses his connection for work 8 hours a day, including VPNing into servers remotely. Besides this I also enjoy playing the odd network game, not a WoW freak, but sometimes I do pick up the odd MMORPG and at times do indulge in some semi heavy gaming sprees. Will this wireless latency drive me crazy and seem slow in comparison? Will it be reliable enough, I also live in an area that snows heavily in winter. I guess its a question of - should I go wireless or not. I've only had 1 wireless connection before and that was years ago using iBurst technology and I remember it was terrible for VPN, but I guess the technology might have been improved since then? What do you guys think?

  Read the article

• Listing group members using ldapsearch

  - by colemanm

  Our corporate LDAP directory is housed on a Snow Leopard Server Open Directory setup. I'm trying to use the ldapsearch tool to export an .ldif file to import into another external LDAP server to authenticate with externally; basically trying to be able to use the same credentials internally and externally. I've got ldapsearch working and giving me the contents and attributes of everything in the "Users" OU, and even filtering down to only the attributes I need: ldapsearch -xLLL -H ldap://server.domain.net / -b "cn=users,dc=server,dc=domain,dc=net" objectClass / uid uidNumber cn userPassword > directorycontents.ldif That gives me a list of users and properties that I can import to my remote OpenLDAP server. dn: uid=username1,cn=users,dc=server,dc=domain,dc=net objectClass: inetOrgPerson objectClass: posixAccount objectClass: organizationalPerson uidNumber: 1000 uid: username1 userPassword:: (hashedpassword) cn: username1 However, when I try the same query on an OD "group" instead of a "container," the results are something like this: dn: cn=groupname,cn=groups,dc=server,dc=domain,dc=net objectClass: posixGroup objectClass: apple-group objectClass: extensibleObject objectClass: top gidNumber: 1032 cn: groupname memberUid: username1 memberUid: username2 memberUid: username3 What I really want is a list of users from the top example filtered based on their group memberships, but it looks like membership is set from the Group side, rather than the user account side. There must be a way to filter this down and only export what I need, right?

  Read the article

• Copying SD Cards with "LaCie d2 Network"

  - by rjstelling

  The LaCie d2 Network has a feature where by you can attach a USB drive and press the blue button at the from and it will copy the drive contents (no computer required). (See this review for more info). USB 2.0 and eSATA ports are also provided but these are not designed for extending the d2 Network's storage. Rather, they allow you to connect portable drives for uploading their data to the d2 Network directly. The process is quite slick, too: just plug in a drive and press the big blue button on the front of the unit to trigger an immediate upload. This copies over everything on the external device and seems ideal for camera use. Is it possible to use an microSD or SD card adapter (like the Kingston MobileLite 9-in-1) and copy the contents of the card? I'm assuming the card reader just "looks like" a normal USB flash drive the computer or (in this case) LaCie d2 Network. Is this assumption correct? Do you know any reason why this won't work?

  Read the article

• Running a VM off a USB 2.0 Flash Drive - Mac/Parallels/XP

  - by geerlingguy

  I use a MacBook Air as my primary machine, and the 128GB SSD means space is precious. To save about 10 GB, I've been running Parallels with a Windows XP VM off an external USB hard drive, which performs as well in everyday use as running the VM off the internal SSD. So, I bought a tiny 32GB USB 2.0 flash drive, plugged it into the MacBook Air, formatted it first as ExFAT (which was slow), then as Mac OS Extended (Journaled) (which was also slow), and copied over my VM file, and ran Parallels off it. My full experience is documented here: http://www.midwesternmac.com/blogs/jeff-geerling/running-windows-xp-vm Straight file copies are really fast — 30 MB/sec read (solid the whole time), and 10-11 MB/sec write (solid the whole time). But I noticed that once XP started running, the disk access rates were in the low KB ranges. Are USB flash drives really that poor at random access, or could I possibly be missing something (the format of the flash drive, etc.?)? Of note, I've tried the following, to no great effect: Formatting the drive as either ExFAT or Mac OS Extended (Journaled) Unplugging all other USB devices and turning off Bluetooth (which runs on the right-side-port USB bus). Plugging in the flash drive either direct in the right side port, or the left side port, or into a USB 2.0 hub

  Read the article

• 2nd instance of mysql closes/doesnt start no warnings/errors?

  - by acidzombie24

  I have an external HD and i'd like to run a 2nd mysql instance on it. I used the windows installer to install/configure mysqld as a service on windows7. I took the my.ini from C:\Program Files\MySQL\MySQL Server 5.5\my.ini Then edited the port (client and mysqld), datadir and innodb_data_home_dir. After running this command "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld" --defaults-file="f:/dev/my.ini" I found an error which was all about the innodb_data_home_dir directory not existing. After that I ran the command again. Mysqld simply starts up for a second then immediately closes. I see no message in my command prompt. I know this command line args are correct as i see the mysqld service using the same one except a different my.ini path. Also it did tell me about the directory not existing so i know it is reading the new ini file. How do i figure out why this 2nd instance of mysqld is closing? How do i get 2 instance running? I'm using v 5.5

  Read the article

• Windows Server 2008 R2 RAS VPN: access server on internal interface ip

  - by Mathias

  Hey, short question: I'm usually a linux admin but need to setup a Win2k8 R2 server for a student project. The server is running as VM on a root server and has a public internet IP assigned. Additionally I need a VPN server to access some services running on the server. I managed to set up a working VPN gateway via the Routing and RAS service which assigns clients an IP in the private subnet 192.168.88.0/24 with the Interface "Internal" listening on 192.168.88.1. Additionally I set up the external interface as NAT interface. So I can connect to the VPN server, get an IP assigned and the server additionally does NAT and I can access the internet over the VPN connection. The only thing I additionally need, is that I can access the server itself over that internal IP (e.g. client 192.168.88.2, server 192.168.88.1) as I want to access some services which I don't like to expose to the internet and restrict them to connected VPN clients. Does anybody have a hint, which configuration I'm missing here to be able to access the server over the VPN connection? EDIT: VPN clients get assigned the IP from the private subnet with subnetmask 255.255.255.255, I guess that might be the reason I can't access the server on the private IP address although it's in the same network range. Any ideas how to change this? I defined a static address pool in the Routing and RAS service, but I can't change the netmask there. EDIT2: I can't access the server from the client, but I can fully access the client from the server (ping, HTTP). I guess it has to do with firewall configuration. Thanks in advance, Mathias

  Read the article

• Sonicwall TZ210 - Set up public wifi on separate subnet & interface

  - by thomasjbarrett

  I want to set up a public wifi by connecting another router to the X6 interface, and put it on a separate subnet (192.168.10.0/24) & in the DMZ Zone to keep it away from the regular LAN. I believe I have the network settings correct: the router has acquired the IP and DNS information from the TZ210, and the TZ210 shows it as an active DHCP lease. X6 is in the DMZ. I now have a routing/NAT/firewall problem, since I can't get any traffic to travel from the subnet to the internet. I can't get to any external websites and can't ping the TZ210 from the subnet. X0 is the regular LAN, and X1 is the WAN. Looking for any tips or tutorials on this. Here's my current relevant rules: Routing Source: X6 Subnet Destination: Any Service: Any Gateway: Default Gateway Interface: X6 Source: Any Destination: X6 Subnet Service: Any Gateway: 0.0.0.0 Interface: X6 NAT Policies Source Original: Any Translated: WAN IP Destination Original: Any Translated: Original Inbound: X6 Outbound: X1 Source Original: Any Translated: U0 IP Destination Original: Any Translated: Original Inbound: X6 Outbound: U0 Firewall DMZ LAN : Deny All DMZ WAN : Allow All LAN DMZ : Allow All WAN DMZ : Allow All

  Read the article

• Referencing groups/classes from Puppet dashboard in my site manifest

  - by Banjer

  I'm using Puppet Dashboard as my ENC and I'm not sure how to reference or use class and group classifications from /etc/puppet/manifests/site.pp. I have two groups defined in the dashboard: CentOS6 and SLES11. What should my site.pp look like if I want to include a certain list of modules in the CentOS6 group and a certain list of modules in the SLES11 group? I'm trying to do something like this: # /etc/puppet/manifests/site.pp node basenode { include hosts include ssh::server include ssh::client include authentication include sudo include syslog include mail } node 'CentOS6' inherits basenode { include profile } node 'SLES11' inherits basenode { include usrmounts } I have OS-specific case statements within my modules, but there are some modules that will only be applied to a certain distro. So I suppose I have two questions: Is this the best way to apply modules/resources in an OS-specific manner? Or does the above make you want to vomit? Regardless of #1, I'm still curious as how to reference classes, groups, and nodes from Dashboard within my manifests. I've read the External Nodes doc, but I'm not seeing how they correspond to manifests. Thanks all.

  Read the article

• Use Mac OS X Server As Development Environment

  - by macinjosh

  I've installed Mac OS X Server 10.6.3 on my laptop to use as my normal OS. I do a lot of web development and thought it would be handy to run OS X Server so I could more easily manage my local development environment (Apache Virtual Hosts, Hostnames for each local site, etc). I'm really enjoying the new setup except for one problem. DNS. My ideal situation would be to add a site (some-site.local) in the Web Service and then go to the DNS Service and add a primary record for the new site. I actually got this working at one point but after a reboot it stopped working! The records look the same as they did before the reboot but the site doesn't come up in Safari. Here is a list of my needs: Need to be able to add new domains at a whim Domains always map to a site on the same box's Web Service Local & External IPs often change It would nice if it worked on any network (i.e. WiFi at the airport or coffee shop) Sites only need to be accessible locally Configuration should stay put even after rebooting I've done some googling and used this as a bit of guide. In the past I've used MAMP and then just a local Apache/PHP/MySQL install with a manually managed hosts file. I'd rather not go back.

  Read the article

• What permission(s) does an application pool identity required to manage other application pools?

  - by Mr Shoubs

  I have a web site (used to manage various parts of our software) that needs the permissions required to start/stop other application pools. I've created a user and set the app pool identity to custom, however the web app still can't start/stop the app pools. I get the following Error: System.UnauthorizedAccessException: Filename: redirection.config Error: Cannot read configuration file due to insufficient permissions at Microsoft.Web.Administration.Interop.AppHostWritableAdminManager.GetAdminSection(String bstrSectionName, String bstrSectionPath) at Microsoft.Web.Administration.Configuration.GetSectionInternal(ConfigurationSection section, String sectionPath, String locationPath) at Microsoft.Web.Administration.ServerManager.get_ApplicationPoolsSection() at Microsoft.Web.Administration.ServerManager.get_ApplicationPools() Discussion here suggests setting the application pool to local system or administrator, this does work, but I don't want to do this for security reasons (external support will need access this site). I did give the user higher permissions (as suggested here), starting by making it part of the local administrators group, but initially this didn't work, and giving the user read/write/mod permission on C:\Windows\System32\inetsrv\config also didn't work. I must have done something wrong as local administrator now works, however this still isn't what I want. So can anyone suggest the permissions I need to add to this user, and how can I apply them? An answer my problem (but different question) is here, but to clarify, I think I need to give an individual user "IIS Runtime Operation Permissions", does anyone know how to do this, if indeed this is the permissions I require?

  Read the article

< Previous Page | 762 763 764 765 766 767 768 769 770 771 772 773  | Next Page >