Search Results

Search found 25727 results on 1030 pages for 'solution'.

Page 767/1030 | < Previous Page | 763 764 765 766 767 768 769 770 771 772 773 774  | Next Page >

• Real-time local backup with versioning on Windows 7/8

  - by Borda

  I'm looking for a reliable backup solution on Windows, something with a feature set similar to Yadis. I've been using CrashPlan for 2 months, but their software lost more than 1TB of my data, that's why I'm looking for alternatives. Requirements: Real-time folder-to-folder backup: I don't need online features, I want to use this to duplicate my files between my local disks. Versioning support: Should be able to choose how many versions to keep of the files. Plain backup: I'd like to be able to open the backup without special software. No proprietary file format. External disk support: Shouldn't have any problem using external disks, at least on the source side. Backup every file, even locked/system files. (Yadis fails this one) Should start automatically, and have a comfortable GUI. Should use actively maintained and/or popular software. I don't want to use discontinued products. Optional requirements: Low RAM usage I'm not really comfortable with something that eats 1GB of my RAM. Compression support Preferably ZIP, but I'm not picky about this. Any ordinary everyday format is acceptable. Freeware or Open Source Preferred, but not necessary. I can do a one-time payment within reasonable bounds. (preferably under $100) I only need Windows support, but if it works on Linux, that's a plus. I've already searched and tried lots of software, most of them failed at the plain backup, the versioning or the locked file backup requirements.

  Read the article

• Networking "chokes" on Windows 7 64 bit

  - by Rohit Nair

  I've been having this problem for some months now, and I have been unable to figure out a solution, or even the cause. At random points throughout the day, my internet connectivity "freezes". I don't get disconnected from my local wireless network. My router doesn't get disconnected from the world. However, for some reason, my computer stops receiving packets. If I'm playing an MMO ( World of Warcraft, in this case, but it has happened with Eve Online as well ) all activity just freezes. If I try to browse, Opera, Firefox and IE all stall at "Waiting for google.com..." or whatever the hostname may be. Inspection with a packet sniffer seems to reveal that there are no incoming packets. Here's the interesting part. Disconnecting from my wireless network and reconnecting fixes the issue. Obviously this led me to conclude that it was a problem with my router or wireless card. However, I have tweaked all the settings on my router that I could think of, including things like QoS, AP Isolation, etc. with no change. My wireless card doesn't really have that many options, and I have uninstalled and reinstalled drivers a few times without any change. Windows Firewall on/off doesn't make a difference. Anyone have any suggestions for debugging this? It's becoming an annoyance.

  Read the article

• Requiring SSH-key Login From Specific IP Ranges

  - by Sean M

  I need to be able to access my server (Ubuntu 8.04 LTS) from remote sites, but I'd like to worry a bit less about password complexity. Thus, I'd like to require that SSH keys be used for login instead of name/password. However, I still have a lot to learn about security, and having already badly broken a test box when I was trying to set this up, I'm acutely aware of the chance of screwing myself while trying to accomplish this. So I have a second goal: I'd like to require that certain IP ranges (e.g. 10.0.0.0/8) may log in with name/password, but everyone else must use an SSH key to log in. How can I satisfy both of these goals? There already exists a very similar question here, but I can't quite figure out how to get to what I want from that information. Current tactic: reading through the PAM documentation (pam_access looks promising) and looking at /etc/ssh/sshd_config. Edit: Alternatively, is there a way to specify that certain users must authenticate with SSH keys, and others may authenticate with name/password? Solution that's currently working: # Globally deny logon via password, only allow SSH-key login. PasswordAuthentication no # But allow connections from the LAN to use passwords. Match Address 192.168.*.* PasswordAuthentication yes The Match Address block can also usefully be a Match User block, answering my secondary question. For now I'm just chalking the failure to parse CIDR addresses up to a quirk of my install, and resolving to try again when I go to Ubuntu 10.04 not too long from now. PAM turns out not to be necessary.

  Read the article

• Windows file locks allowing multiple users to write to open file over network

  - by JPbuntu

  I have 6 windows computers (xp,vista,7) that need to access a samba share (Ubuntu 12.04). I am trying to make it so only one client can open a file at a given time. I thought this was pretty standard behavior of file locks, but I can't get it to work. The way it is right now a file can be open by two users, and changed and saved by either one of them. The last file saved overwrites what ever changes the other user made. At first I thought this was a Samba configuration problem, but I get this behavior even between two windows machines. So far I have only tested: Windows Xp Windows Vista Windows XP Samba << Windows Vista and both give the same behavior. When I tested the Samba configuration, I had set strict locking = yes and get errors logged like this: close_remove_share_mode: Could not get share mode lock for file _prod/part_number_list_COPY.xlsx Eventually all of the files are going to be moved onto the Samba share, so that is the configuration I am most concerned about fixing. Any ideas? Thanks in advance. EDIT: I tested an excel file again, and it is now working properly in both above mentioned cases, I am also no longer getting the above mentioned error. I don't know what happened, perhaps a restart fixed it? (also works with strict locking = no) Although I still need to find a solution for the CAD/CAM files we use, the software is Vector and it does not seem to be using file locks. Is there any software that I can use to manage these files, so two people can't open/edit them at a time? Maybe a windows application that forces file locks? Or a dirt simple version control system? (the only ones I have seen at are too complicated for our needs).

  Read the article

• htaccess not properly rewriting urls

  - by Cameron Ball

  This is a bit of a weird one. I'm doing some work on a server, and I need rewrite rules for directories that actually exist (in some cases, they are more than one level deep) At the moment my .htaccess looks like this: RewriteEngine on RewriteRule ^simfiles/([-\ a-zA-Z0-9:/]+)$ http://mydomain.com/?portal=simfiles&folder=$1 [L] And this is working OK, for example, a url like: mydomain.com/sifmiles/my-files Will get redirected to mydomain.com/?portal=simfiles&folder=my-files Or in the case of a directory structure that is deeper than one level: mydomain.com/sifmiles/my-files/more-of-my-files Will get redirected to mydomain.com/?portal=simfiles&folder=my-files/more-of-my-files I wrote the regex so that it won't match things with a . in the path, because there are css and js files which reside in simfiles/somedirectory, and if I redirect everything then these cannot be loaded. I tried a configuration like this: RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^simfiles/([-\ a-zA-Z0-9:/\.]+)$ http://mydomain.com/?portal=simfiles&folder=$1 [L] But that doesn't work, things still don't load properly. So my first question is, how can I achieve this "properly"? I don't like my solution because it means redirects won't occur if the folder has a . in its name. My second problem, is that while the redirection is happening properly, the url becomes: http://mydomain.com/?portal=simfiles&folder=my-files I want the URL to remain clean, like: http://mydomain.com/sifmiles/my-files How can I achieve this?

  Read the article

• Windows 7, network connection with no default gateway: any way to change the "Unknown network" statu

  - by e-t172

  Hi, I have a computer running Windows 7 Pro RTM. This computer has two network connections: A Wi-fi connection to the Internet (through a home router) which works just fine. An OpenVPN virtual network connection. More precisely, this is a virtual Ethernet connection which behaves exactly like a physical Ethernet wired connection. My problem is that the "Network and sharing center" shows "Unknown network" for the OpenVPN connection. After some research I found that logical networks (outside a domain) are identified by the MAC address of the default gateway of the connection. Problem is, the OpenVPN connection has no default gateway: it is a private network, so I don't need one... Consequently, the "Unknown network" is always considered public, so the firewall is always in "public mode", which I don't want. Plus, I can't rename "Unknown connection" or anything (which makes sense), so it is kinda ugly. My goal is to define a proper logical network for the OpenVPN connection with the private profile. I know of some workarounds (disable the firewall, modify security policy to make all unknown networks "private") but they're still workarounds. I just want my clients to connect to the VPN without having to disable their firewall settings, without changing global configuration with potential side-effects (the "security policy" solution) and without having to look at an ugly "Unknown connection" in the Network and sharing center. Is there any way I can do this? I tried to check what was going on in the registry (HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkList is interesting), but I still didn't find a way to "force" the OpenVPN connection to be assigned to a logical network. Any help would be very appreciated. A related question showed up at Superuser: http://superuser.com/questions/37355/windows-7-cant-identify-network/37422

  Read the article

• Windows 2008 R2 remote desktop - Double Login

  - by Zulgrib

  After an Active Directory fail RDP connection started to ask for credentials twice (once on local RDP program, second time on remote's logon screen) I already looked at Windows 2008 R2 RDS - Double Login Solution provided there doesn't work for me. The server is alone, without AD/DNS services, RDP service isn't installed I tried every security settings on RDP-Tcp (RDP, Negotiate, SLL) Logon option is set to "Use credentials from the client" Both windows client and server use RDP 7.1 fPromptForPassword regitries are set to 0 Local Computer Policy\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security\Always prompt for password upon connection is set to "Disabled" Why i am sure the problem comes from the server and not the client ? This problem affected a 3rd RDP program on Android too (it was directly showing "preparing desktop previously, on both MS RDP and the 3rd program) No bakcup are available (Else the Active Directory wouldn't be a fail, but just a lose of time) I am wondering if a rule linked to RDP got changed after the AD install+unistall, but i'm unable to find where. While this is not a critic problem, this is very annoying. I don't know if more information are needed, if it's the case and if you are patient enough, please tell me what is missing and i'll edit this post to add the missing informations.

  Read the article

• cygwin sshd times out for remote login

  - by reve_etrange

  I have configured SSHD using Cygwin on Windows 7. I have checked and double-checked all of the following points: Port forwarding is correctly configured Windows Firewall is configured to pass port 22 Local login attempts (using Cygwin SSH) succeed sshd_config has UseDNS No Using nmap from remote machine confirms port 22 is accessible /etc/passwd and /etc/group are correctly populated However, remote login attempts time out. This includes from the local network. user@host:~$ ssh -vvv [email protected] OpenSSH_5.5p1 Debian-4ubuntu6, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /home/user/.ssh/config debug1: Applying options for * debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to the.ip.add.ress [the.ip.add.ress] port 22. debug1: connect to address the.ip.add.ress port 22: Connection timed out ssh: connect to the.ip.add.ress port 22: Connection timed out No messages are logged to /var/log/sshd.log. I suspect that there is a permissions issue with a particular file somewhere, however I have checked the permissions of all my Cygwin binaries, DLLs and the particular files important to Cygwin sshd, including all of: /etc/passwd /etc/group /var /var/log/sshd.log /var/empty Others who have reported this or similar errors appear to have missed one of the points enumerated above. Can anyone point me to a possible solution?

  Read the article

• How to connect the virtual networks of vmware guests running on different hosts?

  - by gyrolf

  In a test setup, we are running several virtual machines on a single vmware workstation host. All virtual machines are connected via a "host only" network. This runs fine up to 2 or 3 virtual machines (depending on the host hardware). To allow more virtual machines, we want to use more host machines. Details about the environment and applications: Host PCs are running Windows XP in a corporate intranet. VMware used is Workstation 6.5 Guests are running Windows Server 2003 All guests act as Web Servers One of the guests additionally acts as Windows File server, offering shared folders for the other guests to connect to. Restrictions: VMware guests shall not be visible from the intranet. Changes to the host PC are restricted by corporate policy. In the virtual network, no domain controller exists. All virtual machines are member of the same workgroup. Running the virtual network as NAT is possible. Port forwarding might be used if it does not conflict with ports used by the host PC. Looking for a solution, I found hints about using router or vpn software on the hosts, but without any details how to setup. (I found a similar question Sharing the network between 2 VMware hosts, but the answer was not sufficient for me.)

  Read the article

• How install ImageMagic 6.6.2 on Ubuntu 10.04 (lucid)

  - by Svyatoslavik

  How install ImageMagic 6.6.2 on Ubuntu 10.04 (lucid) Problem that lucid have old ImageMagic version(6.5.2) Its very important because me need work with SVG grafics, In my local pc I have ubuntu 11.04 and ImageMagic 6.6.2 and all work fine, In server I have 6.5... and I have problem. Reinstall ubuntu to 11.* this is no solution. I tried change /etc/apt/source.list from ubuntu 10.04 (lucid) to list from ubuntu 11.04 (natty) and update ImageMagic. After this action I have ImageMagic 6.6.2 (I looked phpinfo()) but ImageMagick is not work now. If I try do any action I get error: [error] 8996#0: *19983 FastCGI sent in stderr: "PHP Fatal error: Uncaught exception 'ImagickException' with message 'no decode delegate for this image format `/tmp/magick-XXnYKWKC' @ error/constitute.c/ReadImage/532' How it fix? Or how return to old version imagemagick? Problem if I try install from sources: /tmp/image/ImageMagick-6.7.2-7# ./configure configuring ImageMagick 6.7.2-7 checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking whether build environment is sane... yes checking for a BSD-compatible install... /usr/bin/install -c checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... no configure: error: in `/tmp/image/ImageMagick-6.7.2-7': configure: error: C compiler cannot create executables See `config.log' for more details /tmp/image/ImageMagick-6.7.2-7#

  Read the article

• Replacing latex with unicode symbols

  - by Elazar Leibovich

  Often, during a conversation or an email, or at a forum, I would like to type some math, but I don't need full equation support. Unicode symbols should suffice. What I need is an easy way to type math related unicode symbols. Since I already know latex, it makes sense to use the latex symbol mnemonics to type the math symbols. What I currently did is to write an AutoHotKey script which automatically replaces \latexSymbol with the corresponding unicode symbol, using the "hotstrings" AutoHotKey feautres. However, the AutoHotKey hotstrings proved unstable for many strings. Having a couple of tens lines would cause AHK to fail recognizing the strings from time to time. Any other solution? (No, Alt+unicode number isn't convenient enough) Attached is my AHK script. The PutUni function is taken from here. ::\infty:: PutUni("e2889e") return ::\sum:: PutUni("e28891") return ::\int:: PutUni("e288ab") return ::\pm:: PutUni("c2b1") return ::\alpha:: PutUni("c991") return ::\beta:: PutUni("c992") return ::\phi:: PutUni("c9b8") return ::\delta:: PutUni("ceb4") return ::\pi:: PutUni("cf80") return ::\omega:: PutUni("cf89") return ::\in:: PutUni("e28888") return ::\notin:: PutUni("e28889") return ::\iff:: PutUni("e28794") return ::\leq:: PutUni("e289a4") return ::\geq:: PutUni("e289a5") return ::\sqrt:: PutUni("e2889a") return ::\neq:: PutUni("e289a0") return ::\subset:: PutUni("e28a82") return ::\nsubset:: PutUni("e28a84") return ::\nsubseteq:: PutUni("e28a88") return ::\subseteq:: PutUni("e28a86") return ::\prod:: PutUni("e2888f") return ::\N:: PutUni("e28495") return

  Read the article

• how to cause linux system datetime to run faster than real world datetime?

  - by JamesThomasMoon1979

  Background I want to monitor a running linux system over several days. It's a custom gentoo build and with much custom software on board. This software has ongoing maintenance timers and cron scripts and other clock driven events. I need to verify these scheduled events are working. Problem Waiting for the system to step through daily and weekly activity is a long wait time. And modifying all clock-based timers on the system would be time consuming. Yet, I often want to test a system's end-to-end scheduled activities without waiting a week. Potential Solution Have the linux system under test appear to run through it's daily cycle of activity within just a few hours. My Question for Serverfault Is there a way to cause the system's time to run faster than real world time? My first thought is manipulating the ntp daemon to repeatedly and smoothly increment the clock . Any other ideas? And yes, I know this may have strange side affects. However, the system has no important or time critical interactions with systems outside of itself. And this may be a valuable testing technique.

  Read the article

• Are HDMI to VGA Adapters Really Device-Specific?

  - by allquixotic

  There are a lot of devices on the market right now (especially mobile devices) with a Micro-HDMI or Mini-HDMI port and no VGA or D-Sub output. Most manufacturers of said devices sell a cable that looks something like this: I have yet to find a cable like this that claims to work on a wide array of devices. In general, these cables claim to work with one specific device only. The way these cables work, I think, is that analog VGA signals are sent from the HDMI port on the device. This should work for devices that have special hardware on the motherboard/GPU capable of driving this. Is it the case that these cables have to be custom designed for each device? Or, is it rather that any device which possesses this special "signaling of analog VGA over the HDMI port" can be made to work with a cable that is physically compatible (i.e. the HDMI end plugs into the device and the VGA end accepts a VGA monitor cable)? Note that I am not looking for a product recommendation, just a conceptual clarification on what exactly these devices are doing. Also, a few remarks: The cables like the one depicted here are not digital to analog converters. I know about these: they are expensive, and they are the ONLY solution if your device only outputs a digital signal and is incapable of driving analog VGA over the HDMI port. The cables like the one depicted here are not straight crossover cables from VGA to HDMI, either. The crossover cables are designed to send a digital HDMI signal over the VGA port's wires; that is, the wire protocol is HDMI (digital) but the physical pinout is the same as VGA, even though nothing analog is happening. Once again, this is not the behavior that, I believe, the devices which I'm talking about in this question are doing. The cabling and devices that this question is about transmit the analog VGA data over the HDMI port (the HDMI port is in the device outputting the data, and the VGA side is the monitor/projector).

  Read the article

• Are web service handler chains possible under IIS / ASP.NET

  - by Mike

  I'm working with a client who wants me to implement a particular design in an IIS/ASP.NET environment. This design was already implemented in Java, but I am not sure it is possible using Microsoft technologies. In a Tomcat/Java environment one can create so call Handler Chains. In essence a handler runs on the server on which the web service is running and it intercepts the SOAP message coming to the web service. The handler can perform a number of tasks before passing control to the web service. Some of these tasks may refer to authentication and authorization. Moreover, one can create handler chains, such that the handlers can run in a particular sequence before passing control to the web service. This is a very elegant solution, as certain aspects of authentication and authorization can be automatically performed, without the developer of the client application and of the web service having to invest anything in it. The code for the client application and the web service is not affected. You may find a number of articles on internet on this subject by searching on Google for "web service handler chain". I performed searches for web service handlers in IIS or ASP.NET. I get some hits, but apparently handlers in IIS have another meaning than that described above. My question therefor is: Can handler chains (as available in Java and Tomcat) be created in IIS? If so, how (any article, book, forum...)? Either a negative or a positive answer will be greatly appreciated. Mike

  Read the article

• Network Management Cable Labeling Techniques and their alternatives [closed]

  - by Alex

  Possible Duplicate: What is the most effective solution you used to label cables? Yes i know there are a lot of howtos and already answered questions about this topic, like this one: How do you organise the cables in your racks? Currently i am searching the web for different techniques (alternatives) for labeling the cables at the server racks and/or data centers. Unfortunately i do not have any experience with labeling/documentation of network cables in a large scale. As far as I could lookup by now the current labeling techniques are coloring and a self defined print-labeling technique (numbering, text) maybe also according to a standard which are usually used. I want to know if QR, RFID (ok RFID in a data center would be stupid due to the radio frequency wouldn't it be?), Barcodes or similar (??) have already been used by some administrators or why they did not consider such techniques at all? Too complicated (with QR scanner etc..) if you are in front of the cables and want to get quick feedback for what the cable is? What alternatives are out there? Advantages/Disadvantages? Best-Practice? I would appreciate any help on this topic, thank you! Regards, Alex

  Read the article

• Sync desktop Mac environment to laptop

  - by Andrew Vit

  I spend the majority of my time working at my desktop Mac, which I have configured for my web development environment. My spouse has a MacBook for casual use, and I occasionally steal it back when I need to work off-site, or when travelling. The question is how to best synchronize the two so I can switch between them more readily. I've solved a few obvious things by using online services: Email is hosted on IMAP. Working files are in Dropbox. Source code is managed in git. However, the following are things I always miss when jumping on the laptop: Installed Applications (current versions) Installed libraries & utilities (/usr/local) Apache VirtualHosts & other configurations (/etc) Disk image files for VMs My current method is to connect the MacBook via Firewire target mode and rsync the /Users/me home directory, and then cherry-pick the other items I need from Applications, /etc and /usr/local. The problem with this method is that it can be very time consuming due to things like my virtual machine image files, cached emails, etc. How can I make this faster & easier? Can you recommend a solution for configuration management (so I can repeatably install & configure the same software on both), or synchronization (so I can bring the MacBook up to date nightly, over our home network)?

  Read the article

• An XKB keyboard map that responds to the left and right shift key individually

  - by mbfisher

  First off, excuse my ignorance of X and XKB; I've been trying to hack together a solution in the hope of being able to achieve what I want without requiring a detailed grasp of it. I'm trying to create an XKB keyboard map on Ubuntu 12.04 that allows me to stipulate which of the two shift keys constitutes the Level2 modifier. Specifically, the 4 key should only produce a $ when the right shift is held, not the left. My reading so far: http://www.charvolant.org/~doug/xkb/html/node5.html http://people.uleth.ca/~daniel.odonnell/Blog/custom-keyboard-in-linuxx11 http://www.x.org/releases/X11R7.5/doc/input/XKB-Enhancing.html Lots of searching! I've attempted to define a custom type, and then refer to it explicitly in a symbols map: /usr/share/X11/xkb/types/mbfisher: default xkb_types "mbfisher" { type "RIGHT_SHIFT" { modifiers = None+Shift_R; map[None] = Level1; map[Shift_R] = Level2; }; } /usr/share/X11/xkb/symbols/mbfisher: default partial alphanumeric_keys xkb_symbols "basic" { name[Group1]= "mbfisher"; key <AE04> { type= "RIGHT_SHIFT", symbols[Group1]= [ 4, dollar ] }; }; I'm then selecting the map with the Ubuntu Keyboard Layout GUI. This obviously disables the alphanumeric keyboard apart from the 4 key, but the dollar sign can still be typed with either shift key. I'm conscious of writing a massive question with lots of useless information so I'll stop here; please ask for anything I've missed out. Any ideas?

  Read the article

• SquidGuard and Active Directory: how to deal with multiple groups?

  - by Massimo

  I'm setting up SquidGuard (1.4) to validate users against an Active Directory domain and apply ACLs based on group membership; this is an example of my squidGuard.conf: src AD_Group_A { ldapusersearch ldap://my.dc.name/dc=domain,dc=com?sAMAccountName?sub?(&(sAMAccountName=%s)(memberOf=cn=Group_A%2cdc=domain%2cdc=com)) } src AD_Group_B { ldapusersearch ldap://my.dc.name/dc=domain,dc=com?sAMAccountName?sub?(&(sAMAccountName=%s)(memberOf=cn=Group_B%2cdc=domain%2cdc=com)) } dest dest_a { domainlist dest_a/domains urllist dest_b/urls log dest_a.log } dest dest_b { domainlist dest_b/domains urllist dest_b/urls log dest_b.log } acl { AD_Group_A { pass dest_a !dest_b all redirect http://some.url } AD_Group_B { pass !dest_a dest_b all redirect http://some.url } default { pass !dest_a !dest_b all redirect http://some.url } } All works fine if an user is member of Group_A OR Group_B. But if an user is member of BOTH groups, only the first source rule is evaluated, thus applying only the first ACL. I understand this is due to how source rule matching works in SquidGuard (if one rule matches, evaluation stops there and then the related ACL is applied); so I tried this, too: src AD_Group_A_B { ldapusersearch ldap://my.dc.name/dc=domain,dc=com?sAMAccountName?sub?(&(sAMAccountName=%s)(memberOf=cn=Group_A%2cdc=domain%2cdc=com)) ldapusersearch ldap://my.dc.name/dc=domain,dc=com?sAMAccountName?sub?(&(sAMAccountName=%s)(memberOf=cn=Group_B%2cdc=domain%2cdc=com)) } acl { AD_Group_A_B { pass dest_a dest_b all redirect http://some.url } [...] } But this doesn't work, too: if an user is member of either one of those groups, the whole source rule is matched anyway, so he can reach both destinations (which is of course not what I want). The only solution I found so far is creating a THIRD group in AD, and assign a source rule and an ACL to it; but this setup grows exponentially with more than two or three destination sets. Is there any way to handle this better?

  Read the article

• ASUS N56VZ-S4209P Screen saver, Screen dimming,sleep/hibernation mode not working according to power management settings

  - by Alto Roos

  I have a problem with my ASUS N56VZ-S4209P(Win8, I7-3630QM) laptop. If I use the fn+f7 command to turn off the screen it turns on by itself after a few seconds (the time varies between 1-10 seconds). In addition to this my screensaver doesn't activate at all and the laptop doesn't dim its screen after X minutes or goes into sleep/hibernation mode as specified in the power options when plugged in or on battery. As far as my knowledge goes it's not caused by the mouse or track pad at all since I can unplug my mouse and disable the track pad but the problem persist. I presume this is caused by the same problem? Does anyone know of a fix for this problem? It would be greatly appreciated. . . . I seem to have found a solution to the problem related to the screen that turns itself on again. The Power4Gear application has a setting which enables you to turn a "Presentation mode" "On" and "Off", if that setting is "Off" then it doesn't turn the screen on without any human interaction. Thus that part of the problem is fixed.

  Read the article

• Recommendations for secure business collaboration tools

  - by Michael Prescott

  I'm searching for a secure and easy way for business partners to collaboratively edit and exchange documents, share calendars, create schedules, and assign tasks. I speculate that the ideal collaboration environment or work-flow would actually involve several technologies and services. My co-workers and I have tried a variety of things from Google Apps to Wiki's, but nothing feels very fluid or complete. I suppose defining what we need and our constraints is probably in order: collaboratively edit basic text documents and spreadsheets exchange documents like flow-charts, graphs, and files generated by our other desktop applications, but not source code assign tasks to each other and ourselves and track the history of those tasks easily see when relevant documents have been modified since last viewing and ability to easily push notifications to relevant workers (a clean front page that shows updates would probably suffice) provide limited access to contract workers and guests users if a remote user system is compromised (keystroke logger or other spyware) we don't want the criminal to be able to gain access to all business documents (processes, trade-secrets, customer lists, etc.) simply because they gained access to a single Google account (or whatever web service) Cannot be a difficult to administer VPN infrastructure Cannot cost more than $100 per month (yeah, money is tight) Needs to support up to 25 users We can host our own web applications, but it must be low maintenance solution

  Read the article

• Windows Server 2008R2 Virtual Lab Activation strategies?

  - by William Hilsum

  I have a ESXi server that I use for testing, however, I am often needing to create additional Windows Server virtual machines. Typically, if I do not need a VM for more than 30 days, I simply do not activate. However, I have been doing a lot of HA/DRS testing recently and I have had a few servers up for more than this time. I have a MSDN account with Microsoft and have already received extra keys for Windows Server 2008 R2. I am doing nothing illegal and I am sure if I asked, they would issue more - but, I do not want to tempt fate! I have got 3 different "activated" windows snapshots I can get to at any time. If I try to clone these machines, I get the usual "did you copy or move them VM" message. If I choose copy, as far as I can see, it changes the BIOS ID and NIC MACs which is enough to disable activation. If I choose move, it keeps the activation fine (obviously, I know to change the NIC MAC - I believe I can leave the BIOS ID without problems). However, either of these options keeps the same SID code for the computer and user accounts. After the activation period has expired, as far as I can see, all that happens is optional updates do not work - it seems that the normal updates work fine. Based on this, as you can easily get in to Windows when not activated without any sort of workaround, I was wondering if it is ok just to leave a machine un activated? (However, I obviously would prefer if it was activated!) Alternatively, how dangerous is it run multiple machines on a non domain environment with the same SID? I am just interested to know if anyone can recommend a strategy for me? I have only found one solution that deals with bypassing activation - I am not interested in doing anything remotely dodgy... at a stretch, I am happy to rearm (I have never needed to keep a server past 100 days), but, I would rather have a proper strategy in place.

  Read the article

• Network profile reverts to 'Unidentified' following Windows Update reboot

  - by user140575

  I have searched high and low for a solution to this problem. I have multiple servers running Windows 2000 Server as well as Windows Server 2003, 2003 R2, and 2008 R2. All of these servers are on the same Active Directory domain. The servers run showing the network profile as Domain Network, which is fine and correct. However, when a Windows update is installed, the server changes the profile to Unidentified Network once it has rebooted. This then doesn't allow any traffic to the server. For security reasons, we can't turn the firewalls off for. The only way to fix the problem is to physically be in front of the machine and work on it to change the profile back. Once the Profile has been reinstated to the Domain profile, it will be fine until the next month's update. This happens on all the Windows software mentioned above. The machines are not all identical, so it's not a hardware problem either. If anyone can help I'd be very grateful.

  Read the article

• Proftpd on Debian ignoring umask setting

  - by sodan

  I have found a solution for my problem. This is what I did: I added the following to my /etc/proftpd/proftpd.conf: <Limit SITE_CHMOD> DenyAll </Limit> I have the following problem: When I upload files to my FTP server the umask I set is totally ignored. All files have permissions 644. I use Debian 5.0.3 as operating system and proftpd 1.3.1 as ftp server. The user logging in is called mug and he is a local user (no virtual user). He is chrooted to the home directory /home/mug/ I tried the following things: 1. set umask setting in /etc/proftpd/proftpd.conf Umask 000 000 This should result in 777 for directories and 666 for files since directory umask is applied to 777 and file umask is applied to 666. After that I of course restarted the proftpd to be sure that the config is reloaded. 2. set umask for the user in /home/mug/.bashrc I added the following to the .bashrc for the user: umask 0000 After that I reloaded the .bashrc: source /home/mug/.bashrc I also checked the umask setting for the user by changing to the user and using this command: su mug umask As result I got a umask of 0000 prompted. So this worked. But still all my uploaded files are having 644 permissions set :( What am I doing wrong?

  Read the article

• Tooltips shadow stuck on desktop

  - by faulty

  I tends to get this problem from time to time. The tooltips with a shadow appearing on top of everything. It's the shadow of the tooltips not disappearing after the tooltips disappear. The last one I had the tooltips was from the wifi connection list at the systray. This problem also happen to me on another computer. Both running Win7 with ATI gpu. I found this similar post Menu command stuck on screen but none of the solution helped. In fact the "Fade or slide tooltips into view" has been unchecked from the beginning. Ending task of "dwm.exe" also doesn't help. So far the only way to resolve this by restarting window. I can't post picture yet, so can't show any screenshot. Edit: Just tested a few more trick which doesn't work. 1. Turn of aero 2. Hibernate 3. Switch main display to external display and switch back. 4. Change resolution

  Read the article

• IIS 7.5 / Windows 7: Error 500.19, error code 0x800700b7

  - by nikhiljoshi

  I have been trying to resolve this issue. I am using Windows 7 and VS2008 +iis7.5. My project is stuck because of this error. The error says: Error Summary HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. `Detailed Error Information Module IIS Web Core Notification BeginRequest Handler Not yet determined Error Code 0x800700b7 Config Error There is a duplicate 'system.web.extensions/scripting/scriptResourceHandler' section defined Config File \\?\C:\inetpub\wwwroot\test23\web.config Requested URL http://localhost:80/test23 Physical Path C:\inetpub\wwwroot\test23 Logon Method Not yet determined Logon User Not yet determined Config Source 15: <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> 16: <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> 17: <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> ` I followed the instructions in this Microsoft solution document, but it didn't help. http://support.microsoft.com/kb/942055

  Read the article

< Previous Page | 763 764 765 766 767 768 769 770 771 772 773 774  | Next Page >