Search Results

Search found 19863 results on 795 pages for 'python subprocess module'.

Page 772/795 | < Previous Page | 768 769 770 771 772 773 774 775 776 777 778 779  | Next Page >

• Implement Semi-Round-Robin file which can be expanded and saved on demand

  - by ircmaxell

  Ok, that title is going to be a little bit confusing. Let me try to explain it a little bit better. I am building a logging program. The program will have 3 main states: Write to a round-robin buffer file, keeping only the last 10 minutes of data. Write to a buffer file, ignoring the time (record all data). Rename entire buffer file, and start a new one with the past 10 minutes of data (and change state to 1). Now, the use case is this. I have been experiencing some network bottlenecks from time to time in our network. So I want to build a system to record TCP traffic when it detects the bottleneck (detection via Nagios). However by the time it detects the bottlenecking, most of the useful data has already been transmitted. So, what I'd like is to have a deamon that runs something like dumpcap all the time. In normal mode, it'll only keep the past 10 minutes of data (Since there's no point in keeping a boat load of data if it's not needed). But when Nagios alerts, I will send a signal in the deamon to store everything. Then, when Naigos recovers it will send another signal to stop storing and flush the buffer to a save file. Now, the problem is that I can't see how to cleanly store a rotating 10 minutes of data. I could store a new file every 10 minutes and delete the old ones if in mode 1. But that seems a bit dirty to me (especially when it comes to figuring out when the alert happened in the file). Ideally, the file that was saved should be such that the alert is always at the 10:00 mark in the file. While that is possible with new files every 10 minutes, it seems like a bit dirty to "repair" the files to that point. Any ideas? Should I just do a rotating file system and combine them into 1 at the end (doing quite a bit of post-processing)? Is there a way to implement the semi-round-robin file cleanly so that there is no need for any post-processing? Thanks Oh, and the language doesn't matter as much at this stage (I'm leaning towards Python, but have no objection to any other language. It's less of an issue than the overall design)...

  Read the article

• "ResolveAssemblyReference" task fails and System.BadImageFormatException, but assembly isn't used an

  - by bdwakefield

  I am getting an error about the assembly "C:\Ora10g\bin\Zip.exe". The trouble is this solution does NOT use anything in Oracle at all. I could not find a single reference to 10g anywhere in the project. I inherited this from another person who left our group. He never had this issue. Another member of my team said he got this before but reinstalling the client portion of 10g fixed it. No such luck there. I even tried using WinGrep to search the entire solution folder for "Ora10g" but it wasn't there. Any ideas? I can't build this solution until I can figure out how to get rid of this false reference to Oracle. VS 2005 solution. Contains a couple WinForm apps, a couple class libraries, and a web service. The error occurs in the main class library project. Here is the error message: Error 1 The "ResolveAssemblyReference" task failed unexpectedly. System.BadImageFormatException: Could not load file or assembly 'C:\Ora10g\bin\Zip.exe' or one of its dependencies. The module was expected to contain an assembly manifest. File name: 'C:\Ora10g\bin\Zip.exe' at System.Reflection.AssemblyName.nGetFileInformation(String s) at System.Reflection.AssemblyName.GetAssemblyName(String assemblyFile) at Microsoft.Build.Shared.AssemblyNameExtension.GetAssemblyNameEx(String path) at Microsoft.Build.Tasks.SystemState.GetAssemblyName(String path) at Microsoft.Build.Tasks.Resolver.FileMatchesAssemblyName(AssemblyNameExtension assemblyName, Boolean isPrimaryProjectReference, Boolean wantSpecificVersion, Boolean allowMismatchBetweenFusionNameAndFileName, String pathToCandidateAssembly, ResolutionSearchLocation searchLocation) at Microsoft.Build.Tasks.Resolver.ResolveAsFile(String fullPath, AssemblyNameExtension assemblyName, Boolean isPrimaryProjectReference, Boolean wantSpecificVersion, Boolean allowMismatchBetweenFusionNameAndFileName, ArrayList assembliesConsideredAndRejected) at Microsoft.Build.Tasks.Resolver.ResolveFromDirectory(AssemblyNameExtension assemblyName, Boolean isPrimaryProjectReference, Boolean wantSpecificVersion, String[] executableExtensions, String directory, ArrayList assembliesConsideredAndRejected) at Microsoft.Build.Tasks.AssemblyFoldersResolver.Resolve(AssemblyNameExtension assemblyName, String rawFileNameCandidate, Boolean isPrimaryProjectReference, Boolean wantSpecificVersion, String[] executableExtensions, String hintPath, String assemblyFolderKey, ArrayList assembliesConsideredAndRejected, String& foundPath, Boolean& userRequestedSpecificFile) at Microsoft.Build.Tasks.AssemblyResolution.ResolveReference(IEnumerable`1 jaggedResolvers, AssemblyNameExtension assemblyName, String rawFileNameCandidate, Boolean isPrimaryProjectReference, Boolean wantSpecificVersion, String[] executableExtensions, String hintPath, String assemblyFolderKey, ArrayList assembliesConsideredAndRejected, String& resolvedSearchPath, Boolean& userRequestedSpecificFile) at Microsoft.Build.Tasks.ReferenceTable.ResolveReference(AssemblyNameExtension assemblyName, String rawFileNameCandidate, Reference reference) at Microsoft.Build.Tasks.ReferenceTable.ResolveAssemblyFilenames() at Microsoft.Build.Tasks.ReferenceTable.ComputeClosure() at Microsoft.Build.Tasks.ReferenceTable.ComputeClosure(DependentAssembly[] remappedAssembliesValue, ITaskItem[] referenceAssemblyFiles, ITaskItem[] referenceAssemblyNames, ArrayList exceptions) at Microsoft.Build.Tasks.ResolveAssemblyReference.Execute(FileExists fileExists, DirectoryExists directoryExists, GetDirectories getDirectories, GetAssemblyName getAssemblyName, GetAssemblyMetadata getAssemblyMetadata, GetRegistrySubKeyNames getRegistrySubKeyNames, GetRegistrySubKeyDefaultValue getRegistrySubKeyDefaultValue, GetLastWriteTime getLastWriteTime) at Microsoft.Build.Tasks.ResolveAssemblyReference.Execute() at Microsoft.Build.BuildEngine.TaskEngine.ExecuteTask(ExecutionMode howToExecuteTask, Hashtable projectItemsAvailableToTask, BuildPropertyGroup projectPropertiesAvailableToTask, Boolean& taskClassWasFound) WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

  Read the article

• Maven-ear-plugin - excluding multiple modules i.e. jars, wars etc.

  - by James Murphy

  I've been using the Maven EAR plugin for creating my ear files for a new project. I noticed in the plugin documentation you can specify exclude statements for modules. For example the configuration for my plugin is as follows... <plugins> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-ear-plugin</artifactId> <version>2.4.1</version> <configuration> <jboss> <version>5</version> </jboss> <modules> <!-- Include the templatecontroller.jar inside the ear --> <jarModule> <groupId>com.kewill.kdm</groupId> <artifactId>templatecontroller</artifactId> <bundleFileName>templatecontroller.jar</bundleFileName> <includeInApplicationXml>true</includeInApplicationXml> </jarModule> <!-- Exclude the following classes from the ear --> <jarModule> <groupId>javax.activation</groupId> <artifactId>activation</artifactId> <excluded>true</excluded> </jarModule> <jarModule> <groupId>antlr</groupId> <artifactId>antlr</artifactId> <excluded>true</excluded> </jarModule> ... declare multiple excludes <security> <security-role id="SecurityRole_1234"> <role-name>admin</role-name> </security-role> </security> </configuration> </plugin> </plugins> This approach is absolutely fine with small projects where you have say 4-5 modules to exclude. However, in my project I have 30+ and we've only just started the project so as it expands this is likely to grow. Besides explicitly declaring exclude statements per module is it possible to use wildcards or and exclude all maven dependencies flag to only include those modules i declare and exclude everything else? Is anyone aware of a more elegant solution?

  Read the article

• Visual Studio 2005 - Debugger stopped working.

  - by eric

  More fun and pain with Visual Studio. Visual Studio 2005. About two months ago, I started an assignment. In my role, I cannot install or configure development software. Trust me this has given me plenty of heartburn. No IIS is involved here, just File Sharing. That being said, when I first started I had a problem with my debugger not working. The debugger just stopped. I was able to get it working. Now the problem has returned and I am pulling every last hair on my head. Almost none of my symbols loads. It can't find the PDB files. In Debugger options, I checked the Symbol section. My symbol file location entry is completely blank. ? I don't know why. I did not touch this prior to the problem occurring. I have cleared the Temporary ASP.NET folders. Example: Here is my Module Output CppCodeProvider.dll C:\Windows\assembly\GAC_MSIL\CppCodeProvider\8.0.0.0__b03f5f7f11d50a3a\CppCodeProvider.dll No No Cannot find or open the PDB file. 17 8.0.50727.762 12/2/2006 4:23 AM 6A510000-6A52C000 [1844] WebDev.WebServer.EXE: Managed WebDev.WebHost.dll C:\Windows\assembly\GAC_32\WebDev.WebHost\8.0.0.0__b03f5f7f11d50a3a\WebDev.WebHost.dll No No Cannot find or open the PDB file. 3 8.0.50727.42 9/23/2005 4:20 AM 6D040000-6D050000 [1844] WebDev.WebServer.EXE: Managed So I enabled the SHFUSION.dll in my versio of the the Framework I am using... In my GAC, I can see this version of WebDev.WebHost.dll for example: ProcessArchitecture(x86) Public key token matches: b03f5f7f11d50a3a 8.0.50727.42 I then see some custom dlls. I should note, I created a new project. Recreated my files manually by importing them. The debugger worked 5 times and died. I'm at a loss of what to do next? The obvious has been checked: The project is set to Debug Configuration Manager Configuration Debug Platform .NET Build : checked. Web.Config: I have attempted to manually attach to the Webdev process from the Debug window and that doesn't work. I have googled this and this problem seems to occur quite a bit.

  Read the article

• Is it possible to programatically catch JavaScript SyntaxErrors?

  - by Matty

  I don't think that this is doable, but wanted to throw it out to the community to confirm my suspicions. Let's say you're writing a program in another language like Python, PHP, or ASP. This program is intended to build another program written in JavaScript. However, the first program is unfortunately not immune to errors. So, occasionally, the program which builds the JavaScript program does some funky stuff and outputs a syntax error in the JavaScript source. Now some user goes and loads the program and it essentially halts, because the web browser running it can't properly parse the JavaScript. This user is probably not going to be happy. I wouldn't be. This brings me to my question. Is it possible to write an error handler that would catch these kind of syntax problems allowing the application to fail gracefully? Here's an example: <html> <head> <script type="text/javascript" charset="utf-8"> window.onerror = errorHandler; function errorHandler(a,b,c) { alert('horray! No wait, Booo!'); } vara jfs; </script> </head> <body> Can this be done? </body> </html> or <html> <head> <script type="text/javascript" charset="utf-8"> try { vara jfs; } catch (e) { alert('horray! No wait, Booo!'); } </script> </head> <body> Can this be done? </body> </html>

  Read the article

• Magento loadByAttribute for Custom Category Attributes

  - by Chris

  I have created custom attributes for a category in my module's install script like so: $attrib = array( 'type' => 'varchar', 'group' => 'My Data', 'backend' => '', 'frontend' => '', 'label' => 'My Custom Field', 'input' => 'text', 'class' => '', 'source' => '', 'global' => Mage_Catalog_Model_Resource_Eav_Attribute::SCOPE_STORE, 'visible' => true, 'required' => false, 'user_defined' => false, 'default' => '', 'searchable' => false, 'filterable' => false, 'comparable' => false, 'visible_on_front' => false, 'unique' => true, ); $installer->addAttribute(3, 'custom_field', $attrib); The field shows up fine in the admin, and when I create the category in my script like so: $p_category = Mage::getModel('catalog/category') ->setStoreId(0) ->load(2); $category = Mage::getModel('catalog/category'); $category->setStoreId(0) ->setName('Test Category') ->setCustomField('abcd') ->setDisplayMode('PRODUCTS') ->setAttributeSetId($category->getDefaultAttributeSetId()) ->setIsActive(1) ->setIsAnchor(1) ->setPath(implode('/',$p_category->getPathIds())) ->setInitialSetupFlag(true) ->save(); I can see the value 'abcd' in the Magneto admin interface. But when I call the code below: <?php $category = Mage::getModel('catalog/category')->loadByAttribute('custom_field', 'abcd'); print_r($category); ?> I get no result. But if I loadByAttribute using the 'name' field set to 'Test Category', I DO get a result. So, in the database, I looked into the catalog_category_entity_varchar table and noticed that the 'name' attribute had an entry for both store_id = 0 AND store_id = 1 whereas the 'custom_field' attribute had only an entry for store_id = 1. When I added a store_id = 0 entry for 'custom_field' with the value set to 'abcd' in the catalog_category_entity_varchar table, loadByAttribute got the expected result. My question is, why is the 'name' field getting a store_id = 0 entry in catalog_category_entity_varchar and my custom field is not? How do I load categories by custom attributes?

  Read the article

• shopify_app syntax error

  - by Pete171

  Edit: Debugging has got me further. Question clarified. We have installed Ruby, RubyGems and Rails and have forked the shopify_app project. We have created a new rails applications and added three items to the Gemfile: execjs, therubyracer and shopify_app. Running rails s in order to start our rails application returns this trace: root@ubuntu:/usr/local/pete-shopify/cart# rails s Faraday: you may want to install system_timer for reliable timeouts /var/lib/gems/1.8/gems/shopify_app-4.1.0/lib/shopify_app.rb:15:in `require': /var/lib /gems/1.8/gems/shopify_app-4.1.0/lib/shopify_app/login_protection.rb:5: syntax error, unexpected ':', expecting kEND (SyntaxError) ...rce::UnauthorizedAccess, with: :close_session ^ from /var/lib/gems/1.8/gems/shopify_app-4.1.0/lib/shopify_app.rb:15 from /var/lib/gems/1.8/gems/bundler-1.2.1/lib/bundler/runtime.rb:68:in `require' from /var/lib/gems/1.8/gems/bundler-1.2.1/lib/bundler/runtime.rb:68:in `require' from /var/lib/gems/1.8/gems/bundler-1.2.1/lib/bundler/runtime.rb:66:in `each' from /var/lib/gems/1.8/gems/bundler-1.2.1/lib/bundler/runtime.rb:66:in `require' from /var/lib/gems/1.8/gems/bundler-1.2.1/lib/bundler/runtime.rb:55:in `each' from /var/lib/gems/1.8/gems/bundler-1.2.1/lib/bundler/runtime.rb:55:in `require' from /var/lib/gems/1.8/gems/bundler-1.2.1/lib/bundler.rb:128:in `require' from /usr/local/pete-shopify/cart/config/application.rb:7 from /var/lib/gems/1.8/gems/railties-3.2.8/lib/rails/commands.rb:53:in `require' from /var/lib/gems/1.8/gems/railties-3.2.8/lib/rails/commands.rb:53 from /var/lib/gems/1.8/gems/railties-3.2.8/lib/rails/commands.rb:50:in `tap' from /var/lib/gems/1.8/gems/railties-3.2.8/lib/rails/commands.rb:50 from script/rails:6:in `require' from script/rails:6 I haven't modified any files since forking from Github. Lines 1 - 6 of login_protection.rb are as follows: module ShopifyApp::LoginProtection extend ActiveSupport::Concern included do rescue from ActiveResource::UnauthorizedAccess, with: :close_session end I've looked into this and it seems that the error is caused by a new-style hash syntax between Ruby 1.8 and 1.9; key : value instead of key => value. Running ruby -v from the command line returns ruby 1.9.3p0 (2011-10-30 revision 33570) [x86_64-linux]. This would seem to be OK... but I did some debugging, and inside the file /var/lib/gems/1.8/gems/shopify_app-4.1.0/lib/shopify_app.rb (at the top) by putting this: puts RUBY_VERSION exit It printed 1.8.7. **Why are ruby -v and RUBY_VERSION giving me different results? And am I correct in assuming this is the cause of my problems? Note: To upgrade Ruby I installed the later version with apt-get and then switched to it by using update-alternatives --config ruby and selecting option 2 like this: root@ubuntu:/usr/local/pete-shopify/cart# update-alternatives --config ruby There are 2 choices for the alternative ruby (providing /usr/bin/ruby). Selection Path Priority Status ------------------------------------------------------------ 0 /usr/bin/ruby1.8 50 auto mode 1 /usr/bin/ruby1.8 50 manual mode * 2 /usr/bin/ruby1.9.1 10 manual mode Also note: We're PHP/Python developers so this is all new to us! Summary: 1 - Am I right in determining the cause of the syntax error? 2 - Why does RUBY_VERSION and ruby -v give me different results?

  Read the article

• What are five things you hate about your favorite language?

  - by brian d foy

  There's been a cluster of Perl-hate on Stackoverflow lately, so I thought I'd bring my "Five things you hate about your favorite language" question to StackOverflow. Take your favorite language and tell me five things you hate about it. Those might be things that just annoy you, admitted design flaws, recognized performance problems, or any other category. You just have to hate it, and it has to be your favorite language. Don't compare it to another language, and don't talk about languages that you already hate. Don't talk about the things you like in your favorite language. I just want to hear the things that you hate but tolerate so you can use all of the other stuff, and I want to hear it about the language you wished other people would use. I ask this whenever someone tries to push their favorite language on me, and sometimes as an interview question. If someone can't find five things to hate about his favorite tool, he don't know it well enough to either advocate it or pull in the big dollars using it. He hasn't used it in enough different situations to fully explore it. He's advocating it as a culture or religion, which means that if I don't choose his favorite technology, I'm wrong. I don't care that much which language you use. Don't want to use a particular language? Then don't. You go through due diligence to make an informed choice and still don't use it? Fine. Sometimes the right answer is "You have a strong programming team with good practices and a lot of experience in Bar. Changing to Foo would be stupid." This is a good question for code reviews too. People who really know a codebase will have all sorts of suggestions for it, and those who don't know it so well have non-specific complaints. I ask things like "If you could start over on this project, what would you do differently?" In this fantasy land, users and programmers get to complain about anything and everything they don't like. "I want a better interface", "I want to separate the model from the view", "I'd use this module instead of this other one", "I'd rename this set of methods", or whatever they really don't like about the current situation. That's how I get a handle on how much a particular developer knows about the codebase. It's also a clue about how much of the programmer's ego is tied up in what he's telling me. Hate isn't the only dimension of figuring out how much people know, but I've found it to be a pretty good one. The things that they hate also give me a clue how well they are thinking about the subject.

  Read the article

• Posting comments to a wordpress-blog in Android

  - by Samuh

  I am working on a module that allows users to post comments on a blog published on Wordpress. I looked at the HTML source for Post-Comment-Form displayed at the bottom of a blog entry (Leave a Reply section). Using that as a reference, I translated it to Java using DefaultHTTPClient and BasicNameValuePairs and my code looks like: DefaultHttpClient httpclient = new DefaultHttpClient(); HttpPost httppost = new HttpPost("http://xycabz.wordpress.com/wp-comments-post.php"); httppost.setHeader("Content-type","application/x-www-form-urlencoded;charset=UTF-8"); List<NameValuePair> nvps = new ArrayList<NameValuePair>(); nvps.add(new BasicNameValuePair("author","abc")); nvps.add(new BasicNameValuePair("email","[email protected]")); nvps.add(new BasicNameValuePair("url","")); nvps.add(new BasicNameValuePair("comment","entiendamonos?")); nvps.add(new BasicNameValuePair("comment_post_ID","123")); //this was a hidden field and always set to 0 nvps.add(new BasicNameValuePair("comment_parent","0")); try { httppost.setEntity(new UrlEncodedFormEntity(nvps)); } catch (UnsupportedEncodingException e1) { e1.printStackTrace(); } BasicResponseHandler handler = new BasicResponseHandler(); try { Log.e("OUTPUT",httpclient.execute(httppost,handler)); } catch (ClientProtocolException e) { e.printStackTrace(); } catch (IOException e) { e.printStackTrace(); } The above code works fine when I try it out on my blog. But when I try this on the actual blog, I get HTTP 302 Found (Redirect to temporary location) exceptions in the logs. The comments never make it to the blog page. Usually, when you post a comment(on the web page) you are taken back to the blog page that enlists all the comments. The URL I am getting in the redirects is the same. Questions: 1. Could this be a post-a-comment settings problem(perhaps something the original blog owner might have set)? 2. How should my HTTPClient handle 302 status code? Eventually, I just have to notify the user of success and failure and not actually take him to the comments page.

  Read the article

• Do you still limit line length in code?

  - by Noldorin

  This is a matter on which I would like to gauge the opinion of the community: Do you still limit the length of lines of code to a fixed maximum? This was certainly a convention of the past for many languages; one would typically cap the number of characters per line to a value such as 80 (and more recnetly 100 or 120 I believe). As far as I understand, the primary reasons for limiting line length are: Readability - You don't have to scroll over horizontally when you want to see the end of some lines. Printing - Admittedly (at least in my experience), most code that you are working on does not get printed out on paper, but by limiting the number of characters you can insure that formatting doesn't get messed up when printed. Past editors (?) - Not sure about this one, but I suspect that at some point in the distant past of programming, (at least some) text editors may have been based on a fixed-width buffer. I'm sure there are points that I am still missing out, so feel free to add to these... Now, when I tend to observe C or C# code nowadays, I often see a number of different styles, the main ones being: Line length capped to 80, 100, or even 120 characters. As far as I understand, 80 is the traditional length, but the longer ones of 100 and 120 have appeared because of the widespread use of high resolutions and widescreen monitors nowadays. No line length capping at all. This tends to be pretty horrible to read, and I don't see it too often, though it's certainly not too rare either. Inconsistent capping of line length. The length of some lines are limited to a fixed maximum (or even a maximum that changes depending on the file/location in code), while others (possibly comments) are not at all. My personal preference here (at least recently) has been to cap the line length to 100 in the Visual Studio editor. This means that in a decently sized window (on a non-widescreen monitor), the ends of lines are still fully visible. I can however see a few disadvantages in this, especially when you end up writing code that's indented 3 or 4 levels and then having to include a long string literal - though I often take this as a sign to refactor my code! In particular, I am curious what the C and C# coders (or anyone who uses Visual Studio for that matter) think about this point, though I would be interested in hearing anyone's thoughts on the subject. Edit Thanks for the all answers - I appreciate the variety of opinions here, all presenting sound reasons. Consensus does seem to be tipping in the direction of always (or almost always) limit the line length. Interestingly, it seems to be in various coding standards to limit the line length. Judging by some of the answers, both the Python and Google CPP guidelines set the limit at 80 chars. I haven't seen anything similar regarding C# or VB.NET, but I would be curious to see if there are ones anywhere.

  Read the article

• Adding Parsekit To An Xcode Project

  - by Garry

  I am trying to add the Parsekit framework to my OSX Xcode project. I've never added a 3rd party framework before and I can't get it to work right. I dragged the included Xcode project into my 'Groups & Files' pane and chose to Add it to my project. I then dragged Parsekit.framework underneath the Link Binary With Libraries heading. Then I double-clicked my target app and added Parsekit as a Direct Dependency. I also added libicucore.dylib as a Linked Library (as it says to do this on their site). Finally, in the Build settings tab of my target info I set the Header Search Paths to /Users/path/to/include/directory and the Other Linker Flags to -ObjC -all_load. Running this as a debug build work fine with no errors. However, when I build my app to release and then try to run the executable created, the app fails to load with the following error message: MyApp cannot be opened because of a problem. Check with the developer to make sure myApp works with this version of Mac OS X. Here is the dump from the crash reporter: Process: MyApp [11658] Path: /Users/Garry/Programming/Xcode/Mac/MyApp/build/Release/MyApp.app/Contents/MacOS/MyApp Identifier: com.yourcompany.MyApp Version: ??? (???) Code Type: X86-64 (Native) Parent Process: launchd [135] Date/Time: 2010-05-24 17:08:08.475 +0100 OS Version: Mac OS X 10.6.3 (10D573) Report Version: 6Interval Since Last Report: 133300 sec Crashes Since Last Report: 3 Per-App Crashes Since Last Report: 3 Anonymous UUID: DF0265E4-B5A0-45E1-8B71-D52A27CFDDCA Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000002, 0x0000000000000000 Crashed Thread: 0 Dyld Error Message: Library not loaded: @executable_path/../Frameworks/ParseKit.framework/Versions/A/ParseKit Referenced from: /Users/Garry/Programming/Xcode/Mac/MyApp/build/Release/MyApp.app/Contents/MacOS/MyApp Reason: image not found Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 4 GB, SMC 1.47f2 Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB Memory Module: global_name AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.91.27) Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports Network Service: AirPort, AirPort, en1 Network Service: Ethernet Adaptor (en6), Ethernet, en6 Serial ATA Device: Hitachi HTS545025B9SA02, 232.89 GB Serial ATA Device: HL-DT-ST DVDRW GS23N USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000 USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000 USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0x04600000 USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06110000 After building the app, in addition to the executable file, Xcode is also creating a file called MyApp.app.dSYM. Any idea what that is?? I am developing with Xcode 3.2.2 on an Intel MBP running 10.6.3. Many thanks for any help offered.

  Read the article

• In GWT I'd like to load the main page on www.domain.com and a dynamic page on www.domain.com/xyz - I

  - by Mike Brecht

  Hi, I have a question for which I'm sure there must a simple solution. I'm writing a small GWT application where I want to achieve this: www.domain.com : should serve the welcome page www.domain.com/xyz : should serve page xyz, where xyz is just a key for an item in a database. If there is an item associated with key xyz, I'll load that and show a page, otherwise I'll show a 404 error page. I was trying to modify the web.xml file accordingly but I just couldn't make it work. I could make it work with an url-pattern if the key in question is after another /, for example: www.domain.com/search/xyz. However, I'd like to have the key xyz directly following the root / (http://www.domain.com/xyz). Something like <servlet-mapping> <servlet-name>main</servlet-name> <url-pattern>/</url-pattern> </servlet-mapping> doesn't seem to work as I don't know how to address the main page index.html (as it's not an actual servlet) which will then load my main GWT module. I could make it work with a bad work around (see below): Redirecting a 404 exception to index.html and then doing the look up in the main entry point, but I'm sure that's not the best practice, also for SEO purposes. Can anyone give me a hint on how to configure the web.xml with GWT for my purpose? Thanks a lot. Mike Work-around via 404: Web.xml: <web-app> <error-page> <exception-type>404</exception-type> <location>/index.html</location> </error-page> <welcome-file-list> <welcome-file>index.html</welcome-file> </welcome-file-list> </web-app> index.html -- Main Entry point -- onModuleLoad(): String path = Window.Location.getPath(); if (path == null || path.length() == 0 || path.equalsIgnoreCase("/") || path.equalsIgnoreCase("/index.html")) { ... // load main page } else { lookup(path.substring(1)); // that's key xyz

  Read the article

• What was your the most impressive technical programming achievement performed to impress a romantic

  - by DVK

  OK, so the archetypal human story is for a guy to go out and impress the girl with some wonderful achievement like slaying a dragon or building a monument or conquering neighboring tribe. This being enlightened 21st century on SO, let's morph this into a: StackOverflower performing a feat of programming to impress a romantic interest. There are two ways to do this: Technical achievement: Impressing a person with suitable background/understanding of programming with actual coding powerss you displayed. A dumb movie example would be that kid in "Hackers" move showing off his hacking skills in front of Angeline Jolie. Artistic achievement: Impressing a person with a result of running said code, whether they understand just how incredible the code itself is. An example is the animated ANSI rose (for a guy who actually wrote the ANSI code) This question is only about the first kind (technical achievements) - e.g. the person of interest was presented with impressive code/design that (s)he was able to properly appreciate. Rules (what doesn't qualify): The target audience must have been a person of romantic interest (prospective or present significant other or random hook-up). E.g. showing your program to your sister who's also a software developer doesn't count. The achievement must have been done specifically with the goal to impress such a person. However, it is OK if the achievement was done to impress a generic qualifying person, not someone specific. Although... if you write code to impress girls in general, I'd say "get a better idea of the opposite sex" The achievement must have been done with the goal of impressing the person. In other words, if you would have done it without romantic interest's knowledge anyway, it doesn't count. As examples, the following does not count: programming for your job. Programming for a coding contest. Open Source program that you'd have done anyway. The precise nature of the awesomeness of the achievement is somewhat irrelevant - from learning entire J2EE in 2 days to writing fancy game engine to implementing Python compiler in LOGO. As long as it's programming/software development related. The achievement should preferably be something other people would rank highly as well. If your date was impressed with your skill at calculating Fibonacci sequence without recursive function calls, it doesn't mean most developers will be. But it does mean you need to start finding better things to do on dates ;)

  Read the article

• Form data sent to Node via Post is undefined

  - by user185812

  I know this has been asked countless times on here, however I tried all the solutions and am still having the issue. Most people say to set the content-type (which I did) and to name the inputs that I wish to Post to node. I have done both of these things, yet still get "undefined" when trying to send data from an HTML form to node. JADE Templating HTML Code (Sorry I can't seem to get the indenting to show up here, however I think I should leave the code intact when posting here instead of converting it to normal HTML so that if the error is in here, you are still able to help) Form(action="/registration", method="post", enctype="application/x-www-form-urlencoded") div(class="control-group-Username") label(class="control-group", for="username") Username: div.controls input#Username(id="Username", type="text", placeholder="Username Here", maxlength="23", name="username") //Other divs and stuff here button.btn#submit_button(type="submit") Submit app.js code /** * Module dependencies. */ express = require('express') , routes = require('./routes') , user = require('./routes/user') , http = require('http') , path = require('path'); app = express(); // all environments app.set('port', process.env.PORT || 3000); app.set('views', __dirname + '/views'); app.set('view engine','jade'); app.use(express.favicon()); app.use(express.logger('dev')); app.use(express.bodyParser()); app.use(express.methodOverride()); app.use(express.cookieParser('your secret here')); app.use(express.session()); app.use(app.router); app.use(require('less-middleware')({ src: __dirname + '/public' })); app.use(express.static(path.join(__dirname, 'public'))); // development only if ('development' == app.get('env')) { app.use(express.errorHandler()); } app.use(express.static(__dirname + '/public')); app.get('/', routes.index); app.get('/users', user.list); app.get('/register', routes.register); http.createServer(app).listen(app.get('port'), function(){ console.log('Express server listening on port ' + app.get('port')); }); require('./Register.js'); register.js code app.post('/registration', function(req, res) { var Email=req.body.username console.log(username); });

  Read the article

• Am I "wasting" my time learning C and other low level stuff ?

  - by Andreas Grech

  I have just recently started learning C and the reason I did that was because frankly, I consider myself to be of a "less-developer" than the people who know and work with C. Thus I planned to start learning ASM, C, C++ and bought the K&R book and started pushing myself to learn the C Programming Language and up till now I'm doing great...learning about arrays the low level way (ie the pointer + offset thing), pointers and all that and obviously asking questions on stackoverflow for guidance. My problem is that sometimes I get thinking if instead of learning this low level stuff, maybe I should maybe spend more time learning newer, more widely used technologies...basically, more web stuff. Now I am well versed with both C# and ASP.Net and currently that's what I do for a living, but still there exists Microsoft technologies that I haven't quite touched upon...such as ASP.Net MVC, The Entity Framework etc... And those are only Microsoft Technologies...obviously there are other stuff that I would like to touch upon...stuff like Ruby, which would lead me to Ruby on Rails, or Python for Django or even Java and J2EE, or maybe even PHP; ie, basically mainly Web Stuff. Mind you, I did touch upon some of the stuff I mentioned earlier on, such as PHP and Java but I am still not quite versed in them as I am in C# and ASP.Net...but still, I think that by learning other languages that are used in the web environment will broaden my horizons...both as a developer who loves learning, and also Career wise. My point is, am I really using up my time correctly by learning older, lower level stuff? Stuff that for my current line of work, will most probably never use, but still is interesting to know ? To be frankly honest, I am also learning C so that I could, maybe someday, get into Electronics and Micro-controller programming but that is a whole new world for me and, if I choose to go there, will take some time to get adjusted to. And even then, I don't know if I can get a career in working in that line of work. ...but I still wonder about this question over and over...Am I doing the right thing by learning C instead of something (Web-stuff) that will most probably be more useful for me career-wise? I'm sorry for such asking such a long and most probably a boring question, but I feel as if this is the only place where I can ask such a question and get an honest answer from experts in the field. Thank you for your time.

  Read the article

• Static Javascript files not loaded in Express app

  - by Dave Long

  I have an express app that has a bunch of static javascript files that aren't being loaded even though they are registered in my app.js file. Even public scripts (like jQuery: http://ajax.googleapis.com/ajax/libs/jquery/1.6.3/jquery.min.js) aren't processing. I can see the script tags in the generated html, but none of the functionality runs and I can't see the files loading in the web inspector. Here is the code that I have: app.js var express = require('express') var app = module.exports = express.createServer(); // Configuration var port = process.env.PORT || 3000; app.configure(function(){ app.set('views', __dirname + '/views'); app.set('view engine', 'jade'); app.use(express.bodyParser()); app.use(express.methodOverride()); app.use(app.router); app.use(express.static(__dirname + '/public')); }); app.configure('development', function(){ app.use(express.errorHandler({ dumpExceptions: true, showStack: true })); }); app.configure('production', function(){ app.use(express.errorHandler()); }); // Routes app.get('/manage/new', function(req, res){ res.render('manage/new', { title: 'Create a new widget' }); }) app.listen(port); console.log("Express server listening on port %d in %s mode", app.address().port, app.settings.env); /views/manage/layout.jade !!! 5 html(lang="en") head title= title link(rel="stylesheet", href="/stylesheets/demo.css") link(rel="stylesheet", href="/stylesheets/jquery.qtip.css") script(type="text/javascript", href="http://ajax.googleapis.com/ajax/libs/jquery/1.6.3/jquery.min.js") body!= body script(type="text/javascript", href="/javascripts/jquery.formalize.js") script(type="text/javascript", href="/javascripts/jquery.form.js") script(type="text/javascript", href="/javascripts/jquery.qtip.js") script(type="text/javascript", href="/javascripts/formToWizard.js") script(type="text/javascript", href="/javascripts/widget.js") /views/manage/new.jade h1= title div(style="float:left;") form(action="/manage/generate", method="post", enctype="multipart/form-data", name="create-widget") .errors fieldset legend Band / Album Information fieldset legend Social Networks fieldset legend Download All of my javascript files are stored in /public/javascripts and all of my static CSS files are being served up just fine. I'm not sure what I've done wrong.

  Read the article

• Which management tools would you recommend for software development?

  - by Robert Schneider

  What would you generally recommend for software developement? Which combination do you use or would you recommend? I assume that tools are needed for Version control, issues/bugs/task, Release management, Requirement management. Tools for Test management and Project management should be accounted for as well, I guess. Did I forget anything? Maybe tools for Continous Integration. I'm not interested in a halfway combination of one ore two tools like a Subversion + Bugzilla (I know they are good but for a company they might not be sufficient). And also tools like make/ant shouldn't be taken into account. I'd like to know a combination that covers all what is important for professional software development. However, it could be a single tool of course if it covers all the management issues. What do you think would be a good combination? I assume a combination should be regardes as good if the tools itself are good but also if they have good integrations. Udate: Something like Ant is just a script not a management tool. Okay: we do already have Perforce. But this is somehow generic. We have different projects that uses C-, VS/.NET-, Python-, PHP and we will be starting new projects in Java. Plenty of languages and frameworks, though some are going to be legacy. So the tools should be generic. Obviously we don't want to use Bugzilla for one project and Jira for another. The management tools have to be generic. Further thoughts: Think of sourceforge: For each project they offer a version control system, an issue tracker, a wiki, ... totally independent of what the project is about. Those are some management tools that a project usually needs. I would say that most companies need such a set of tools. But I could imagine, if a company has several projects, they need further tools too: for Project management, Quality management, ... And I could imagine there are some recommendable combinations of tools. A not really apropiate comparison to this could be LAMP (Linux, Apache, MySQL, PHP). A combination of software that has evolved since they work very well together, and are pretty useful for a lot of applications (or rather web sites). So maybe there are some recommendable management tool combinations that also fit toghether like LAMP. The integration is important. Thank you for the incredibly fast and helpful responses!!!

  Read the article

• How to write this JavaScript code without eval?

  - by karlthorwald

  How to write this JavaScript code without eval? var typeOfString = eval("typeof " + that.modules[modName].varName); if (typeOfString !== "undefined") { doSomething(); } The point is that the name of the var that I want to check for is in a string. Maybe it is simple but I don't know how. Edit: Thank you for the very interesting answers so far. I will follow your suggestions and integrate this into my code and do some testing and report. Could take a while. Edit2: I had another look at the could and maybe itis better I show you a bigger picture. I am greatful for the experts to explain so beautiful, it is better with more code: MYNAMESPACE.Loader = ( function() { function C() { this.modules = {}; this.required = {}; this.waitCount = 0; this.appendUrl = ''; this.docHead = document.getElementsByTagName('head')[0]; } function insert() { var that = this; //insert all script tags to the head now! //loop over all modules: for (var modName in this.required) { if(this.required.hasOwnProperty(modName)){ if (this.required[modName] === 'required') { this.required[modName] = 'loading'; this.waitCount = this.waitCount + 1; this.insertModule(modName); } } } //now poll until everything is loaded or //until timout this.intervalId = 0; var checkFunction = function() { if (that.waitCount === 0) { clearInterval(that.intervalId); that.onSuccess(); return; } for (var modName in that.required) { if(that.required.hasOwnProperty(modName)){ if (that.required[modName] === 'loading') { var typeOfString = eval("typeof " + that.modules[modName].varName); if (typeOfString !== "undefined") { //module is loaded! that.required[modName] = 'ok'; that.waitCount = that.waitCount - 1; if (that.waitCount === 0) { clearInterval(that.intervalId); that.onSuccess(); return; } } } } } }; //execute the function twice a second to check if all is loaded: this.intervalId = setInterval(checkFunction, 500); //further execution will be in checkFunction, //so nothing left to do here } C.prototype.insert = insert; //there are more functions here... return C; }()); var myLoader = new MYNAMESPACE.Loader(); //some more lines here... myLoader.insert();

  Read the article

• Git/Mercurial (hg) opinion

  - by Richard

  First, let me say I'm not a professional programmer, but an engineer who had a need for it and had to learn. I was always working alone, so it was just me and my seven splitted personalities ... and we worked okey as a team :) Most of my stuff is done in C/Fortran/Matlab and so far I've been learning git to manage it all. However, although I've had no unsolvable problems with it, I've never been "that" happy with it ... for everything I cannot do, I hae to look up a book. And, for some time now I've been hearning a lot of good stuff about hg. Now, a coleague of mine will have to work with me on a project (I almost feel sorry for him) and he's started learning hg (says he likes it more), and I'm considering the switch myself. We work almost exclusivly on Windows platform (although I manage relatively ok using unix tools and things that come from that part of the world). So, I was wondering, in a described scenario, what problems could I expect with the switch. I heard that hg is rather more user friendly towards windows users, regarding the user interfaces. How does it handle repositories ? Does it create them the same way as git does (just one subdirectory in a working directory) and can I just copy the whole project directory (including git repo) and just carry them somewhere with no extra thinking ? (I really liked that when I was choosing over git/svn). Are there any good books on it that you can recommend (something like Pro Git, only for Hg). What are good ways to implement hg into Visual Studio/GVim for Windows, or into Windows Explorer so I can work relatively easily (I would like to avoid using the command line for everything regarding it, like in git shell). Is there something else I should be aware of (please, on this don't point me to other questions ... they just give me a ton of info, and I'm not sure what is it that I should take as important, and what to disregard). I'm trying to cut some time, since I cannot spend all that time relearning hg, like I did for git. I've also heard git is c project, while mercurial is python ... is there any noticeable difference in speed. git was pretty speedy ... will I encounter some waiting while working. Notice: All my projects are of let's say, middle size ... mostly numerical simulations ... 10-15000 lines (medium size?)

  Read the article

• Is the Scala 2.8 collections library a case of "the longest suicide note in history" ?

  - by oxbow_lakes

  First note the inflammatory subject title is a quotation made about the manifesto of a UK political party in the early 1980s. This question is subjective but it is a genuine question, I've made it CW and I'd like some opinions on the matter. Despite whatever my wife and coworkers keep telling me, I don't think I'm an idiot: I have a good degree in mathematics from the University of Oxford and I've been programming commercially for almost 12 years and in Scala for about a year (also commercially). I have just started to look at the Scala collections library re-implementation which is coming in the imminent 2.8 release. Those familiar with the library from 2.7 will notice that the library, from a usage perspective, has changed little. For example... > List("Paris", "London").map(_.length) res0: List[Int] List(5, 6) ...would work in either versions. The library is eminently useable: in fact it's fantastic. However, those previously unfamiliar with Scala and poking around to get a feel for the language now have to make sense of method signatures like: def map[B, That](f: A => B)(implicit bf: CanBuildFrom[Repr, B, That]): That For such simple functionality, this is a daunting signature and one which I find myself struggling to understand. Not that I think Scala was ever likely to be the next Java (or /C/C++/C#) - I don't believe its creators were aiming it at that market - but I think it is/was certainly feasible for Scala to become the next Ruby or Python (i.e. to gain a significant commercial user-base) Is this going to put people off coming to Scala? Is this going to give Scala a bad name in the commercial world as an academic plaything that only dedicated PhD students can understand? Are CTOs and heads of software going to get scared off? Was the library re-design a sensible idea? If you're using Scala commercially, are you worried about this? Are you planning to adopt 2.8 immediately or wait to see what happens? Steve Yegge once attacked Scala (mistakenly in my opinion) for what he saw as its overcomplicated type-system. I worry that someone is going to have a field day spreading fud with this API (similarly to how Josh Bloch scared the JCP out of adding closures to Java). Note - I should be clear that, whilst I believe that Josh Bloch was influential in the rejection of the BGGA closures proposal, I don't ascribe this to anything other than his honestly-held beliefs that the proposal represented a mistake.

  Read the article

• Build path issues learning Guice

  - by Preston

  I can't figure out why I'm getting this error below I have included all the appropriate jars as far as I can tell(I have included eclipses .classpath file below.) All of the classpath entries resolve just fine. What am I missing? The type javax.servlet.ServletContextListener cannot be resolved. It is indirectly referenced from required .class files on the "extends GuiceServletContextListener" line - import com.google.inject.Guice; import com.google.inject.Injector; import com.google.inject.servlet.GuiceServletContextListener; import com.google.inject.servlet.ServletModule; public class ServletConfig extends GuiceServletContextListener { @Override protected Injector getInjector() { return Guice.createInjector(new ServletModule(){ @Override protected void configureServlets() { // TODO: add necessary code to bind } }); } } .Classpath <?xml version="1.0" encoding="UTF-8"?> <classpath> <classpathentry kind="src" path="src"/> <classpathentry kind="con" path="org.eclipse.jdt.launching.JRE_CONTAINER/org.eclipse.jdt.internal.debug.ui.launcher.StandardVMType/jdk1.7.0_21"> <attributes> <attribute name="owner.project.facets" value="java"/> </attributes> </classpathentry> <classpathentry kind="con" path="oracle.eclipse.tools.glassfish.lib.system"> <attributes> <attribute name="owner.project.facets" value="jst.web"/> </attributes> </classpathentry> <classpathentry kind="con" path="org.eclipse.jst.j2ee.internal.web.container"/> <classpathentry kind="con" path="org.eclipse.jst.j2ee.internal.module.container"/> <classpathentry kind="lib" path="guice-3.0/aopalliance.jar"/> <classpathentry kind="lib" path="guice-3.0/guice-3.0.jar"/> <classpathentry kind="lib" path="guice-3.0/guice-servlet-3.0.jar"/> <classpathentry kind="lib" path="guice-3.0/javax.inject.jar"/> <classpathentry kind="output" path="build/classes"/> </classpath>

  Read the article

• PL/SQL pre-compile and Code Quality checks in an automatted build environment?

  - by Lars Corneliussen

  We build software using Hudson and Maven. We have C#, java and last, but not least PL/SQL sources (sprocs, packages, DDL, crud) For C# and Java we do unit tests and code analysis, but we don't really know the health of our PL/SQL sources before we actually publish them to the target database. Requirements There are a couple of things we wan't to test in the following priority: Are the sources valid, hence "compilable"? For packages, with respect to a certain database, would they compile? Code Quality: Do we have code flaws like duplicates, too complex methods or other violations to a defined set of rules? Also, the tool must run head-less (commandline, ant, ...) we wan't to do analysis on a partial code base (changed sources only) Tools We did a little research and found the following tools that could potencially help: Cast Application Intelligence Platform (AIP): Seems to be a server that grasps information about "anything". Couldn't find a console version that would export in readable format. Toad for Oracle: The Professional version is said to include something called Xpert validates a set of rules against a code base. Sonar + PL/SQL-Plugin: Uses Toad for Oracle to display code-health the sonar-way. This is for browsing the current state of the code base. Semantic Designs DMSToolkit: Quite general analysis of source code base. Commandline available? Semantic Designs Clones Detector: Detects clones. But also via command line? Fortify Source Code Analyzer: Seems to be focussed on security issues. But maybe it is extensible? more... So far, Toad for Oracle together with Sonar seems to be an elegant solution. But may be we are missing something here? Any ideas? Other products? Experiences? Related Questions on SO: http://stackoverflow.com/questions/531430/any-static-code-analysis-tools-for-stored-procedures http://stackoverflow.com/questions/839707/any-code-quality-tool-for-pl-sql http://stackoverflow.com/questions/956104/is-there-a-static-analysis-tool-for-python-ruby-sql-cobol-perl-and-pl-sql

  Read the article

• How can I import one Gradle script into another?

  - by Ant

  Hi all, I have a complex gradle script that wraps up a load of functionality around building and deploying a number of netbeans projects to a number of environments. The script works very well, but in essence it is all configured through half a dozen maps holding project and environment information. I want to abstract the tasks away into another file, so that I can simply define my maps in a simple build file, and import the tasks from the other file. In this way, I can use the same core tasks for a number of projects and configure those projects with a simple set of maps. Can anyone tell me how I can import one gradle file into another, in a similar manner to Ant's task? I've trawled Gradle's docs to no avail so far. Additional Info After Tom's response below, I thought I'd try and clarify exactly what I mean. Basically I have a gradle script which runs a number of subprojects. However, the subprojects are all Netbeans projects, and come with their own ant build scripts, so I have tasks in gradle to call each of these. My problem is that I have some configuration at the top of the file, such as: projects = [ [name:"MySubproject1", shortname: "sub1", env:"mainEnv", cvs_module="mod1"], [name:"MySubproject2", shortname: "sub2", env:"altEnv", cvs_module="mod2"] ] I then generate tasks such as: projects.each({ task "checkout_$it.shortname" << { // Code to for example check module out from cvs using config from 'it'. } }) I have many of these sort of task generation snippets, and all of them are generic - they entirely depend on the config in the projects list. So what I want is a way to put this in a separate script and import it in the following sort of way: projects = [ [name:"MySubproject1", shortname: "sub1", env:"mainEnv", cvs_module="mod1"], [name:"MySubproject2", shortname: "sub2", env:"altEnv", cvs_module="mod2"] ] import("tasks.gradle") // This will import and run the script so that all tasks are generated for the projects given above. So in this example, tasks.gradle will have all the generic task generation code in, and will get run for the projects defined in the main build.gradle file. In this way, tasks.gradle is a file that can be used by all large projects that consist of a number of sub-projects with Netbeans ant build files.

  Read the article

• one page over 9 different urls

  - by Ali Demirtas

  Hi I am using prestashop as the cart for my website. I have a problem; the website used to be in dynamic urls. I enabled friendly url writing. The problem is that one page has more than one url. You can access a same page from the dynamic url and static url. In fact a single page has 9 different urls. This obviously creates problems for seo as search engines penalize my website for this. Here are examples of a page with more than 2 urls (http://www.turkishfootballstore.com/lang-nl/product.php?id_product=515) (http://www.turkishfootballstore.com/fenerbahce/515-fenerbahce-thuisshirt-20092010.html) (http://www.turkishfootballstore.com/lang-nl/fenerbahce/515-fenerbahce-thuisshirt-20092010.html) you can see even the static url's have 2 one with language defined and the other without. out fo the three urls above the correct one is the one at the bottom. What can I do to solve this problem? I have no knowledge of programming. Here is the htaccess for the website. Any sample code or help is really appreciated. There is 550 pages and every page is published in 17 different languages I want to use a 301 auto redirect. What is the simplest way to do it? I have no idea of coding. # URL rewriting module activation RewriteEngine on # URL rewriting rules RewriteRule ^([a-z0-9]+)\-([a-z0-9]+)(\-[_a-zA-Z0-9-]*)/([_a-zA-Z0-9-]*)\.jpg$ /img/p/$1-$2$3.jpg [L,E] RewriteRule ^([0-9]+)\-([0-9]+)/([_a-zA-Z0-9-]*)\.jpg$ /img/p/$1-$2.jpg [L,E] RewriteRule ^([0-9]+)(\-[_a-zA-Z0-9-]*)/([_a-zA-Z0-9-]*)\.jpg$ /img/c/$1$2.jpg [L,E] RewriteRule ^lang-([a-z]{2})/([a-zA-Z0-9-]*)/([0-9]+)\-([a-zA-Z0-9-]*)\.html(.*)$ /product.php?id_product=$3&isolang=$1$5 [L,E] RewriteRule ^lang-([a-z]{2})/([0-9]+)\-([a-zA-Z0-9-]*)\.html(.*)$ /product.php?id_product=$2&isolang=$1$4 [L,E] RewriteRule ^lang-([a-z]{2})/([0-9]+)\-([a-zA-Z0-9-]*)(.*)$ /category.php?id_category=$2&isolang=$1 [QSA,L,E] RewriteRule ^([a-zA-Z0-9-]*)/([0-9]+)\-([a-zA-Z0-9-]*)\.html(.*)$ /product.php?id_product=$2$4 [L,E] RewriteRule ^([0-9]+)\-([a-zA-Z0-9-]*)\.html(.*)$ /product.php?id_product=$1$3 [L,E] RewriteRule ^([0-9]+)\-([a-zA-Z0-9-]*)(.*)$ /category.php?id_category=$1 [QSA,L,E] RewriteRule ^content/([0-9]+)\-([a-zA-Z0-9-]*)(.*)$ /cms.php?id_cms=$1 [QSA,L,E] RewriteRule ^([0-9]+)__([a-zA-Z0-9-]*)(.*)$ /supplier.php?id_supplier=$1$3 [QSA,L,E] RewriteRule ^([0-9]+)_([a-zA-Z0-9-]*)(.*)$ /manufacturer.php?id_manufacturer=$1$3 [QSA,L,E] RewriteRule ^lang-([a-z]{2})/(.*)$ /$2?isolang=$1 [QSA,L,E] # Catch 404 errors ErrorDocument 404 /404.php Options +FollowSymLinks RewriteEngine on RewriteCond %{HTTP_HOST} ^***.com [NC] RewriteRule ^(.*)$ http://www.***.com/$1 [L,R=301] Options +FollowSymLinks RewriteEngine on # index.php to / RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*index\.php\ HTTP/ RewriteRule ^(.*)index\.php$ /$1 [R=301,L] Header set Cache-Control: "no-store, no-cache, must-revalidate, pre-check=0, post-check=0, max-age=0"

  Read the article

• ActiveMQ 5.2.0 + REST + HTTP POST = java.lang.OutOfMemoryError

  - by Bruce Loth

  First off, I am a newbie when it comes to JMS & ActiveMQ. I have been looking into a messaging solution to serve as middleware for a message producer that will insert XML messages into a queue via HTTP POST. The producer is an existing system written in C++ that cannot be modified (so Java and the C++ API are out). Using the "demo" examples and some trial and error, I have cobbled together a working example of what I want to do (on a windows box). The web.xml I configured in a test directory under "webapps" specifies that the HTTP POST messages received from the producer are to be handled by the MessageServlet. I added a line for the text app in "activemq.xml" ('ow' is the test app dir): I created a test script to "insert" messages into the queue which works well. The problem I am running into is that it as I continue to insert messages via REST/HTTP POST, the memory consumption and thread count used by ActiveMQ continues to rise (It happens when I have timely consumers as well as slow or non-existent consumers). When memory consumption gets around 250MB's and the thread count exceeds 5000 (as shown in windows task manager), ActiveMQ crashes and I see this in the log: Exception in thread "ActiveMQ Transport Initiator: vm://localhost#3564" java.lang.OutOfMemoryError: unable to create new native thread It is as if Jetty is spawning a new thread to handle each HTTP POST and the thread never dies. I did look at this page: http://activemq.apache.org/javalangoutofmemory.html and tried but that didn't fix the problem (although I didn't fully understand the implications of the change either). Does anyone have any ideas? Thanks! Bruce Loth PS - I included the "test message producer" python script below for what it is worth. I created batches of 100 messages and continued to run the script manually from the command line while watching the memory consumption and thread count of ActiveMQ in task manager. def foo(): import httplib, urllib body = "<?xml version='1.0' encoding='UTF-8'?>\n \ <ROOT>\n \ [snip: xml deleted to save space] </ROOT>" headers = {"content-type": "text/xml", "content-length": str(len(body))} conn = httplib.HTTPConnection("127.0.0.1:8161") conn.request("POST", "/ow/message/RDRCP_Inbox?type=queue", body, headers) response = conn.getresponse() print response.status, response.reason data = response.read() conn.close() ## end method definition ## Begin test code count = 0; while(count < 100): # Test with batches of 100 msgs count += 1 foo()

  Read the article

< Previous Page | 768 769 770 771 772 773 774 775 776 777 778 779  | Next Page >