Search Results

Search found 38064 results on 1523 pages for 'oracle linux'.

Page 773/1523 | < Previous Page | 769 770 771 772 773 774 775 776 777 778 779 780  | Next Page >

• Python virtualenv questions

  - by orokusaki

  I'm using VirtualEnv on Windows XP. I'm wondering if I have my brain wrapped around it correctly. I ran virtualenv ENV and it created C:\WINDOWS\system32\ENV. I then changed my PATH variable to include C:\WINDOWS\system32\ENV\Scripts instead of C:\Python27\Scripts. Then, I checked out Django into C:\WINDOWS\system32\ENV\Lib\site-packages\django-trunk, updated my PYTHON_PATH variable to point the new Django directory, and continued to easy_install other things (which of course go into my new C:\WINDOWS\system32\ENV\Lib\site-packages directory). I understand why I should use VirtualEnv so I can run multiple versions of Django, and other libraries on the same machine, but does this mean that to switch between environments I have to basically change my PATH and PYTHON_PATH variable? So, I go from developing one Django project which uses Django 1.2 in an environment called ENV and then change my PATH and such so that I can use an environment called ENV2 which has the dev version of Django? Is that basically it, or is there some better way to automatically do all this (I could update my path in Python code, but that would require me to write machine-specific code in my application)? Also, how does this process compare to using VirtualEnv on Linux (I'm quite the beginner at Linux).

  Read the article

• Setting the default stack size on Linux globally for the program

  - by wowus

  So I've noticed that the default stack size for threads on linux is 8MB (if I'm wrong, PLEASE correct me), and, incidentally, 1MB on Windows. This is quite bad for my application, as on a 4-core processor that means 64 MB is space is used JUST for threads! The worst part is, I'm never using more than 100kb of stack per thread (I abuse the heap a LOT ;)). My solution right now is to limit the stack size of threads. However, I have no idea how to do this portably. Just for context, I'm using Boost.Thread for my threading needs. I'm okay with a little bit of #ifdef hell, but I'd like to know how to do it easily first. Basically, I want something like this (where windows_* is linked on windows builds, and posix_* is linked under linux builds) // windows_stack_limiter.c int limit_stack_size() { // Windows impl. return 0; } // posix_stack_limiter.c int limit_stack_size() { // Linux impl. return 0; } // stack_limiter.cpp int limit_stack_size(); static volatile int placeholder = limit_stack_size(); How do I flesh out those functions? Or, alternatively, am I just doing this entirely wrong? Remember I have no control over the actual thread creation (no new params to CreateThread on Windows), as I'm using Boost.Thread.

  Read the article

• How frequently IP packets are fragmented at the source host?

  - by Methos

  I know that if IP payload MTU then routers usually fragment the IP packet. Finally all the fragmented packets are assembled at the destination using the fields IP-ID, IP fragment offsets and fragmentation flags. Max length of IP payload is 64K. Thus its very plausible for L4 to hand over payload which is 64K. If the L2 protocol is Ethernet, which often is the case, then the MTU will be about 1600 bytes. Hence IP packet will be fragmented at the source host itself. However, a quick search about IP implementation in Linux tells me that in recent kernels, L4 protocols are fragment friendly i.e. they try to save the fragmentation work for IP by handing over buffers of size which is close to MTU. Considering these two facts, I am wondering about how frequently does the IP packet gets fragmented at the source host itself. Does it occur sometimes/rarely/never? Does anyone know if there are exceptions to the rule of fragmentation in linux kernel (i.e. are there situations where L4 protocols are not fragment friendly)? How is this handled in other common OSes like windows? In general how frequently IP packets are fragmented?

  Read the article

• Shared Memory and Process Sempahores (IPC)

  - by fsdfa

  This is an extract from Advanced Liniux Programming: Semaphores continue to exist even after all processes using them have terminated. The last process to use a semaphore set must explicitly remove it to ensure that the operating system does not run out of semaphores.To do so, invoke semctl with the semaphore identifier, the number of semaphores in the set, IPC_RMID as the third argument, and any union semun value as the fourth argument (which is ignored).The effective user ID of the calling process must match that of the semaphore’s allocator (or the caller must be root). Unlike shared memory segments, removing a semaphore set causes Linux to deallocate immediately. If a process allocate a shared memory, and many process use it and never set to delete it (with shmctl), if all them terminate, then the shared page continues being available. (We can see this with ipcs). If some process did the shmctl, then when the last process deattached, then the system will deallocate the shared memory. So far so good (I guess, if not, correct me). What I dont understand from that quote I did, is that first it say: "Semaphores continue to exist even after all processes using them have terminated." and then: "Unlike shared memory segments, removing a semaphore set causes Linux to deallocate immediately."

  Read the article

• Oracle - correlated subquery problems

  - by FrustratedWithFormsDesigner

  I have this query: select acc_num from (select distinct ac_outer.acc_num, ac_outer.owner from ac_tab ac_outer where (ac_outer.owner = '1234567') and ac_outer.owner = (select sq.owner from (select a1.owner from ac_tab a1 where a1.acc_num = ac_outer.acc_num order by a1.a_date desc, a1.b_date desc, a1.c_date desc) sq where rownum = 1) order by dbms_random.value()) subq order by acc_num; The idea is to get all acc_nums (not a primary key) from ac_tab, that have an owner of 1234567. Since an acc_num in ac_tab could have changed owners over time, I am trying to use the inner correlated subqueries to ensure that an acc_num is returned ONLY if it's most recent owner is 12345678. Naturally, it doesn't work (or I wouldn't be posting here ;) ) Oracle gives me an error: ORA-000904 ac_outer.acc_num is an invalid identifier. I thought that ac_outer should be visible to the correlated subqueries, but for some reason it's not. Is there a way to fix the query, or do I have to resort to PL/SQL to solve this? (Oracle verison is 10g)

  Read the article

• Finding missing files by checksum

  - by grw

  Hi there, I'm doing a large data migration between two file systems (let's call them F1 and F2) on a Linux system which will necessarily involve copying the data verbatim into a differently-structured hierarchy on F2 and changing the file names. I'd like to write a script to generate a list of files which are in F1 but not in F2, i.e. the ones which weren't copied by the migration script into the new hierarchy, so that I can go back and migrate them manually. Unfortunately for reasons not worth going into, the migration script can't be modified to list files that it doesn't migrate. My question differs from this previously answered one because of the fact that I cannot rely on filenames as a comparison. I know the basic outline of the process would be: Generate a list of checksums for all files, recursing through F1 Do the same for F2 Compare the lists and generate a negative intersection of the checksums, ignoring the file names, to find files which are in F1 but not in F2. I'm kind of stuck getting past that stage, so I'd appreciate any pointers on which tools to use. I think I need to use the 'comm' command to compare the list of file checksums, but since md5sum, sha512sum and the like put the file name next to the checksum, I can't see a way to get it to bring me a useful comparison. Maybe awk is the way to go? I'm using Red Hat Enterprise Linux 5.x. Thanks.

  Read the article

• Difference between Oracle,My SQL and MS SQL

  - by Brigadier Jigar

  Hi there, I want to know the differences between Oracle, My SQL and MS SQL. Regards, Jigar

  Read the article

• How can use rdlc report with Oracle procedure ?

  - by Sony

  Can any one help to solve creating reports of rdlc using Oracle stored procedure.

  Read the article

• Materiliaze view in oracle

  - by P Sharma

  How to create/refresh materialize view in oracle 10g.

  Read the article

• .NET application with an Oracle Database

  - by Pavitar

  I have to code a desktop application and some dynamic web content. I'm planning to develop it in .NET with an Oracle database, though my dilemma is that my professor says that if I do so, there would be a lot of support issues later on. He says .NET is more compatible with MS SQL and MS Access, and so is the trend, everyone does it.Is it true? I have learnt Oracle so I know of a few features which I wouldn't be able to implement on SQL comfortably because of lack of knowledge of SQL databases.I would love to learn the new syntax but again, I don't have much time to spare.

  Read the article

• Freeing of allocated memory in Solaris/Linux

  - by user355159

  Hi, I have written a small program and compiled it under Solaris/Linux platform to measure the performance of applying this code to my application. The program is written in such a way, initially using sbrk(0) system call, i have taken base address of the heap region. After that i have allocated an 1.5GB of memory using malloc system call, Then i used memcpy system call to copy 1.5GB of content to the allocated memory area. Then, I freed the allocated memory. After freeing, i used again sbrk(0) system call to view the heap size. This is where i little confused. In solaris, eventhough, i freed the memory allocated (of nearly 1.5GB) the heap size of the process is huge. But i run the same application in linux, after freeing, i found that the heap size of the process is equal to the size of the heap memory before allocation of 1.5GB. I know Solaris does not frees memory immediately, but i don't know how to tune the solaris kernel to immediately free the memory after free() system call. Also, please explain why the same problem does not comes under Linux? Can anyone help me out of this? Thanks, Santhosh.

  Read the article

• Portable way of counting milliseconds in C++ ?

  - by ereOn

  Hi, Is there any portable (Windows & Linux) way of counting how many milliseconds elapsed between two calls ? Basically, I want to achieve the same functionnality than the StopWatch class of .NET. (for those who already used it) In a perfect world, I would have used boost::date_time but that's not an option here due to some silly rules I'm enforced to respect. For those who better read code, this is what I'd like to achieve. Timer timer; timer.start(); // Some instructions here timer.stop(); // Print out the elapsed time std::cout << "Elapsed time: " << timer.milliseconds() << "ms" << std::endl; So, if there is a portable (set of) function(s) that can help me implement the Timer class, what is it ? If there is no such function, what Windows & Linux API should I use to achieve this functionnality ? (using #ifdef WINDOWS-like macros) Thanks !

  Read the article

• PHP shell_exec() - Run directly, or perform a cron (bash/php) and include MySQL layer?

  - by Jimbo

  Sorry if the title is vague - I wasn't quite sure how to word it! What I'm Doing I'm running a Linux command to output data into a variable, parse the data, and output it as an array. Array values will be displayed on a page using PHP, and this PHP page output is requested via AJAX every 10 seconds so, in effect, the data will be retrieved and displayed/updated every 10 seconds. There could be as many as 10,000 characters being parsed on every request, although this is usually much lower. Alternative Idea I want to know if there is a better* alternative method of retrieving this data every 10 seconds, as multiple users (<10) will be having this command executed automatically for them. A cronjob running on the server could execute either bash or php (which is faster?) to grab the data and store it in a MySQL database. Then, any AJAX calls to the PHP output would return values in the MySQL database rather than making a direct call to execute server code every 10 seconds. Why? I know there are security concerns with running execs directly from PHP, and (I hope this isn't micro-optimisation) I'm worried about CPU usage on the server. The server is running a sempron processor. Yes, they do still exist. Having this only execute when the user is on the page (idea #1) means that the server isn't running code that doesn't need to be run. However, is this slow and insecure? Just in case the type of linux command may be of assistance in determining it's efficiency: shell_exec("transmission-remote $host:$port --auth $username:$password -l"); I'm hoping that there are differences in efficiency and level of security with the two methods I have outlined above, and that this isn't just micro-micro-optimisation. If there are alternative methods that are better*, I'd love to learn about these! :)

  Read the article

• Perl Linux::Inotify2 - can't respond to events anymore

  - by alcy

  I am getting some really weird behavior when using Linux::Inotify2 module for watching a directory for any newly created files. I had made a test script to see how it worked, and once that was done, I went on to incorporating its usage in the other scripts, in which it didn't work. Then, when I tried my earlier test script again to find some information, strangely that stopped working as well. It hasn't worked since then. There were no package/distro upgrades during that time. The problem is that it has stopped responding to events. Here's the test script: #!/usr/bin/perl use strict; use warnings; use Linux::Inotify2; my $inotify = new Linux::Inotify2 or die "unable to create new inotify object: $!"; my $dir = "/my/dir"; $inotify->watch($dir, IN_CREATE, sub { my $e = shift; print $e->fullname; }) or die " Can't watch $!"; 1 while $inotify->poll; A strace on the running script kills the script. Otherwise when strace is used when starting the script, then it does seem to read the new events, but there's no response to those events. Any suggestions for debugging this further ?

  Read the article

• OpenGL (glx) not working with ubuntu 12.10

  - by user26766

  It all started when I installed nvidia's own (download from website) driver. Uninstalling it and reverting back to nvidia-current didn't solve the problem, so I have been playing with this for a while. It seems glx support is missing, and my intel graphics is not responding. gnome loads only in fallback mode. Here are some outputs: glxinfo name of display: :0.0 Error: couldn't find RGB GLX visual or fbconfig glxgears Error: couldn't get an RGB, Double-buffered visual optirun glxgears works fine lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff) Here's the content of log file when just after running glxinfo: less /var/log/Xorg.0.log | grep gl [ 112.156] (II) LoadModule: "glx" [ 112.157] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 112.157] (II) Module glx: vendor="X.Org Foundation" [ 112.157] (II) UnloadModule: "glx" [ 112.157] (II) Unloading glx [ 112.157] (EE) Failed to load module "glx" (module requirement mismatch, 0) Some more info... lsmod Module Size Used by bbswitch 13612 0 pci_stub 12623 1 vboxpci 23195 0 vboxnetadp 25671 0 vboxnetflt 23480 0 vboxdrv 320372 3 vboxpci,vboxnetadp,vboxnetflt parport_pc 32689 0 ppdev 17074 0 bnep 18141 2 rfcomm 46620 12 binfmt_misc 17501 1 snd_hda_codec_hdmi 32049 1 snd_hda_codec_realtek 78147 1 joydev 17458 0 uvcvideo 76750 0 videobuf2_core 32852 1 uvcvideo videodev 120310 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12861 1 uvcvideo videobuf2_memops 13405 1 videobuf2_vmalloc snd_hda_intel 33492 3 coretemp 13401 0 kvm_intel 132760 0 arc4 12530 2 snd_hda_codec 134213 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel kvm 414111 1 kvm_intel iwlwifi 386837 0 i915 520799 2 snd_hwdep 17699 1 snd_hda_codec snd_pcm 96668 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec psmouse 100389 0 drm_kms_helper 49113 1 i915 ghash_clmulni_intel 13221 0 snd_seq_midi 13325 0 snd_rawmidi 30513 1 snd_seq_midi btusb 22475 0 drm 288436 3 i915,drm_kms_helper serio_raw 13216 0 snd_seq_midi_event 14900 1 snd_seq_midi snd_seq 61555 2 snd_seq_midi,snd_seq_midi_event mac80211 535936 1 iwlwifi bluetooth 209249 22 bnep,rfcomm,btusb snd_timer 29426 2 snd_pcm,snd_seq snd_seq_device 14498 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78921 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 206797 2 iwlwifi,mac80211 aesni_intel 51038 1 cryptd 20404 2 ghash_clmulni_intel,aesni_intel aes_x86_64 17256 1 aesni_intel dell_wmi 12682 0 sparse_keymap 13891 1 dell_wmi dcdbas 14439 0 i2c_algo_bit 13414 1 i915 microcode 22804 0 lpc_ich 17062 0 soundcore 15048 1 snd snd_page_alloc 18485 2 snd_hda_intel,snd_pcm video 19391 1 i915 mac_hid 13206 0 wmi 19071 1 dell_wmi mei 40691 0 lp 17760 0 parport 46346 3 parport_pc,ppdev,lp ahci 25721 3 libahci 31192 1 ahci atl1c 41102 0 how can I fix this? any ideas? Here is another thing I've tried: sudo apt-get purge nvidia* sudo reboot sudo apt-get install bumblebee bumblebee-nvidia didn't make any difference. The most relevant post I found on the web was this: http://ubuntuforums.org/archive/index.php/t-1722306.html Here it's explained that the problem is with the priority of shared libraries that are loaded for glxinfo. Here's what I get when I look up the libraries: linux-vdso.so.1 => (0x00007fff6bf8b000) libGL.so.1 => /usr/lib/x86_64-linux-gnu/mesa/libGL.so.1 (0x00007f22d6ccd000) libX11.so.6 => /usr/lib/x86_64-linux-gnu/libX11.so.6 (0x00007f22d6993000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f22d65d3000) libglapi.so.0 => /usr/lib/x86_64-linux-gnu/libglapi.so.0 (0x00007f22d63ad000) libXext.so.6 => /usr/lib/x86_64-linux-gnu/libXext.so.6 (0x00007f22d619b000) libXdamage.so.1 => /usr/lib/x86_64-linux-gnu/libXdamage.so.1 (0x00007f22d5f97000) libXfixes.so.3 => /usr/lib/x86_64-linux-gnu/libXfixes.so.3 (0x00007f22d5d91000) libX11-xcb.so.1 => /usr/lib/x86_64-linux-gnu/libX11-xcb.so.1 (0x00007f22d5b8f000) libxcb-glx.so.0 => /usr/lib/x86_64-linux-gnu/libxcb-glx.so.0 (0x00007f22d5977000) libxcb.so.1 => /usr/lib/x86_64-linux-gnu/libxcb.so.1 (0x00007f22d5759000) libXxf86vm.so.1 => /usr/lib/x86_64-linux-gnu/libXxf86vm.so.1 (0x00007f22d5553000) libdrm.so.2 => /usr/lib/x86_64-linux-gnu/libdrm.so.2 (0x00007f22d5346000) libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f22d5129000) libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f22d4f25000) /lib64/ld-linux-x86-64.so.2 (0x00007f22d6f54000) libXau.so.6 => /usr/lib/x86_64-linux-gnu/libXau.so.6 (0x00007f22d4d20000) libXdmcp.so.6 => /usr/lib/x86_64-linux-gnu/libXdmcp.so.6 (0x00007f22d4b1a000) librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007f22d4911000) It seems "mesa" instead of nvidia-current is being used. However I didn't find any obvious link to /lib/nvidia-current in /etc/ld.so.conf (where the directories containing the shared libraries are listed). I don't know if there's anything missing or if this is normal. thanks, UPDATE: The problem was solved by updating to Ubuntu 13.04. It seems bumblebee was to blame, but I'm not sure what was going wrong...

  Read the article

• Can't start managed server in Oracle Weblogic 10.3.2

  - by Neuquino

  I installed Oracle SOA Suite 11g. I start the NodeManager successfully. I start the AdminServer successfully. When I go to start the soa serve (soa_server1) I get this output: NMProcess: <Mar 15, 2010 3:33:30 PM> <WARNING> <Exception while starting server 'soa_server1'> NMProcess: java.io.IOException: Server failed to start up. See server output log for more details. NMProcess: at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331) NMProcess: at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541) NMProcess: at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:116) NMProcess: at weblogic.nodemanager.server.Handler.run(Handler.java:70) NMProcess: at java.lang.Thread.run(Thread.java:619) NMProcess: NMProcess: Mar 15, 2010 3:33:30 PM weblogic.nodemanager.server.Handler handleStart NMProcess: WARNING: Exception while starting server 'soa_server1' NMProcess: java.io.IOException: Server failed to start up. See server output log for more details. NMProcess: at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:331) NMProcess: at weblogic.nodemanager.server.Handler.handleStart(Handler.java:541) NMProcess: at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:116) NMProcess: at weblogic.nodemanager.server.Handler.run(Handler.java:70) NMProcess: at java.lang.Thread.run(Thread.java:619) Error Starting server soa_server1: weblogic.nodemanager.NMException: Exception while starting server 'soa_server1' In the log file I've got this: Enter username to boot WebLogic server:Enter password to boot WebLogic server: There are 1 nested errors: weblogic.management.ManagementException: Booting as admin server, but servername, soa_server1, does not match the admin server name, AdminServer at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:67) at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461) at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166) at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:749) at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:488) at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446) at weblogic.Server.main(Server.java:67) > <Mar 15, 2010 3:33:30 PM ART> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED> <Mar 15, 2010 3:33:30 PM ART> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down> <Mar 15, 2010 3:33:30 PM ART> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN> <Mar 15, 2010 3:33:30 PM> <FINEST> <NodeManager> <Waiting for the process to die: 31144> <Mar 15, 2010 3:33:30 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted> <Mar 15, 2010 3:33:30 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters> Do you have any clue of what is happening? If you need more info, just ask for it. thanks in advance

  Read the article

• Networking issues with Linux server (CentOS 5.3)

  - by sxanness

  I have a Linux server hosting our bug tracking software (CentOS 5.2 Kernel 2.6.18-128.4.1.el5) that I have having some strange network problems with. The machine is configured with two NICS, one for the public interface and the other for our server back end network. The problem is that after doing a service network restart I can ping the public interface and it sends anywhere from 200-500 ICMP packets and then all of a sudden I start getting a request timed out error. Strange but as soon as I connect to the private interface the ping starts working again to the public interface. I clearly have a routing issue somewhere. I have a Juniper Router with the following configuration. Interface 0/0 -- Connect subnet to the ISP at our co-location Interface 0/2 -- For our DRAC network Interface 0/3 -- The Server-backend network (plugs directly into a switch that feeds to all the NICs that are on the 10.3.20.x network. Interface 0/4 -- Plugs directly into another switch that feeds our public interfaces, that interface as all the gateways from our public ip rangs as secondary IP addresses. I hope that someone can ask the right questions that can lead me to check things and figure out what is going on. Has anyone had similar problems and what kind of things should I be checking? Routing issue or something even more complicated? [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth0 BOOTPROTO=static IPADDR=72.249.134.98 NETMASK=255.255.255.248 BROADCAST=72.249.134.103 HWADDR=00:16:3E:AA:BB:EE ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth1 BOOTPROTO=static BROADCAST=10.3.20.255 HWADDR=00:17:3E:AA:BB:EE IPADDR=10.3.20.25 NETMASK=255.255.255.0 NETWORK=10.3.20.0 ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=fogbugz.dfw.hisg-it.net GATEWAY=72.249.134.97 [root@fogbugz ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 72.249.134.96 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.3.20.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 10.0.0.0 10.3.20.1 255.0.0.0 UG 0 0 0 eth1 0.0.0.0 72.249.134.97 0.0.0.0 UG 0 0 0 eth0

  Read the article

• Networking issues with Linux server (CentOS 5.3)

  - by sxanness

  I have a Linux server hosting our bug tracking software (CentOS 5.2 Kernel 2.6.18-128.4.1.el5) that I have having some strange network problems with. The machine is configured with two NICS, one for the public interface and the other for our server back end network. The problem is that after doing a service network restart I can ping the public interface and it sends anywhere from 200-500 ICMP packets and then all of a sudden I start getting a request timed out error. Strange but as soon as I connect to the private interface the ping starts working again to the public interface. I clearly have a routing issue somewhere. I have a Juniper Router with the following configuration. Interface 0/0 -- Connect subnet to the ISP at our co-location Interface 0/2 -- For our DRAC network Interface 0/3 -- The Server-backend network (plugs directly into a switch that feeds to all the NICs that are on the 10.3.20.x network. Interface 0/4 -- Plugs directly into another switch that feeds our public interfaces, that interface as all the gateways from our public ip rangs as secondary IP addresses. I hope that someone can ask the right questions that can lead me to check things and figure out what is going on. Has anyone had similar problems and what kind of things should I be checking? Routing issue or something even more complicated? [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth0 BOOTPROTO=static IPADDR=72.249.134.98 NETMASK=255.255.255.248 BROADCAST=72.249.134.103 HWADDR=00:16:3E:AA:BB:EE ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1 # Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ DEVICE=eth1 BOOTPROTO=static BROADCAST=10.3.20.255 HWADDR=00:17:3E:AA:BB:EE IPADDR=10.3.20.25 NETMASK=255.255.255.0 NETWORK=10.3.20.0 ONBOOT=yes [root@fogbugz ~]# cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=fogbugz.dfw.hisg-it.net GATEWAY=72.249.134.97 [root@fogbugz ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 72.249.134.96 0.0.0.0 255.255.255.248 U 0 0 0 eth0 10.3.20.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 10.0.0.0 10.3.20.1 255.0.0.0 UG 0 0 0 eth1 0.0.0.0 72.249.134.97 0.0.0.0 UG 0 0 0 eth0

  Read the article

• VPN pptp connection Unable to pass through linux iptables

  - by user221844

  I have set up a windows VPN server behind Linux - Ubuntu box that is working as firewall and proxy server. Now I want people from outside to be able to connect to the VPN server, but the connection is not being established and I get on the client an error 619. I have checked the problem on the internet and it seems a firewall issue. what should I do to make the connection established through the firewall? here is below the information about my setup Firewall-External-IF-IP: 172.16.1.100 Firewall-LAN-IF-IP: 192.168.1.1 VPN-Server-IP: 192.168.1.10 and below is my iptables file content: #Generated by iptables-save v1.4.12 on Thu May 29 12:40:18 2014 *filter :INPUT ACCEPT [162000:140437619] :FORWARD ACCEPT [23282:27196133] :OUTPUT ACCEPT [185778:143961739] :LOGGING - [0:0] -A INPUT -p gre -j ACCEPT -A INPUT -s 192.168.1.10/32 -p tcp -m tcp --sport 1723 -j ACCEPT -A INPUT -s 192.168.1.10/32 -p udp -m udp --sport 1723 -j ACCEPT -A FORWARD -s 192.168.1.0/24 -o EXT_IF -j ACCEPT -A FORWARD -s 192.168.1.0/24 -i EXT_IF -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -d 192.168.1.10/32 -i EXT_IF -o INT_IF -p tcp -m tcp --dport 1723 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 192.168.1.10/32 -i INT_IF -o EXT_IF -p tcp -m tcp --sport 1723 -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -d 192.168.1.10/32 -i EXT_IF -o INT_IF -p gre -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT -A FORWARD -s 192.168.1.10/32 -i INT_IF -o EXT_IF -p gre -m state --state RELATED,ESTABLISHED -j ACCEPT -A OUTPUT -p gre -j ACCEPT -A OUTPUT -d 192.168.1.10/32 -p tcp -m tcp --dport 1723 -j ACCEPT -A OUTPUT -d 192.168.1.10/32 -p udp -m udp --dport 1723 -j ACCEPT COMMIT # Completed on Thu May 29 12:40:18 2014 # Generated by iptables-save v1.4.12 on Thu May 29 12:40:18 2014 *nat :PREROUTING ACCEPT [17865:1053739] :INPUT ACCEPT [5490:357281] :OUTPUT ACCEPT [3723:223677] :POSTROUTING ACCEPT [3726:223870] -A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 -A PREROUTING -d 172.16.1.100/32 -i EXT_IF -p tcp -m tcp --dport 1723 -j DNAT --to-destination 192.168.1.10 -A PREROUTING -d 172.16.1.100/32 -i EXT_IF -p gre -j DNAT --to-destination 192.168.1.10 -A PREROUTING -i -h -A POSTROUTING -s 192.168.1.0/24 -o EXT_IF -j MASQUERADE COMMIT # Completed on Thu May 29 12:40:18 2014 # Generated by iptables-save v1.4.12 on Thu May 29 12:40:18 2014 *mangle :PREROUTING ACCEPT [22695965:17811993005] :INPUT ACCEPT [13818180:11522330171] :PREROUTING ACCEPT [17865:1053739] :INPUT ACCEPT [5490:357281] :OUTPUT ACCEPT [3723:223677] :POSTROUTING ACCEPT [3726:223870] -A PREROUTING -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 -A PREROUTING -d 172.16.1.100/32 -i EXT_IF -p tcp -m tcp --dport 1723 -j DNAT --to-destination 192.168.1.10 -A PREROUTING -d 172.16.1.100/32 -i EXT_IF -p gre -j DNAT --to-destination 192.168.1.10 -A PREROUTING -i -h -A POSTROUTING -s 192.168.1.0/24 -o EXT_IF -j MASQUERADE COMMIT # Completed on Thu May 29 12:40:18 2014 # Generated by iptables-save v1.4.12 on Thu May 29 12:40:18 2014 *mangle :PREROUTING ACCEPT [22695965:17811993005] :INPUT ACCEPT [13818180:11522330171] :FORWARD ACCEPT [8527694:6271564562] :OUTPUT ACCEPT [14748508:11899678536] :POSTROUTING ACCEPT [23271280:18170828012] COMMIT # Completed on Thu May 29 12:40:18 2014 hope that I find the solution here ....!! :(

  Read the article

• Linux Software RAID1 Rebuild Completes, but after reboot, its degraded again

  - by zimmy6996

  I have been beating my head with an issue here, and I'm now turning to the internet for help. I have a system running Mandrake Linux, with the following configuration: /dev/hda - This is a IDE drive. Has some partitions on it that boot the system and make up most of the file system. /dev/sda - This is drive 1 of 2 for a software raid /dev/md0 /dev/sdb - This is drive 2 of 2 for a software raid /dev/md0 md0 gets mounted but fstab as /data-storage, so it is not critical to the systems ability to boot. We can comment it out of fstab, and the system works just fine either way. The problem is, we have a failed sdb drive. So I shut the box down, and have pulled the failed disk and installed a new disk. When the system boots up, /proc/mdstat shows only sda as part of the raid. I then run the various command to rebuild the RAID to /dev/sdb. Everything rebuilds correctly, and upon completion, you look at /proc/mdstat and it shows 2 drives sda1(0) and sdb1(1). Everything looks great. Then you reboot the box ... UGH!!! Once rebooted, sdb is missing again from the RAID. It is like the rebuild never happened. I can walk through the commands to rebuild it again, and it will work, but again, after reboot, the box seems to make sdb just vanish! The real odd thing is, if after reboot, I pull sda out of the box, and try to get the system to load with the rebuilt sdb drive in the system, and when I do, the system actually throws and error just after grub, and says something about drive error, and the system has to shut down. Thoughts??? I'm starting to wonder if grub has something to do with this mess. That the drive isn't being setup within grub to be visible at boot? This RAID array isn't necessary for the system to boot, but when the replacement drive is in there, without SDA it won't boot system, so it makes me believe there is something to that. On top of that, there just seems to be something wonky here the drive falling off of RAID after reboot. I've hit the point of pounding my head on the keyboard. Any help would be greatly appreciated!!!

  Read the article

• Linux bonded Interfaces hanging periodically

  - by David

  I've several hosts that are showing problems with connectivity. When working from the command line, for example, typing is frozen for a second or so, then recovers - then it does it again. The most egregious example host would freeze (input) for 15-30 seconds, then recover and go out 5 seconds later. Switching cables didn't do anything - but removing one of the physical cables caused everything to clear up instantly (which why I think this is a network problem). Looking at the network I couldn't see any packets floating that would explain this. These ethernet interfaces (Gigabit Dell) were working normally previously, but since we moved the systems - and put them on a new set of switches - this has been a problem on multiple theoretically identically-configured hosts. The original switches were an HP Procurve 1810-24G and an HP Procurve 1800-24G connected with LLDP; the new switches are both Cisco SG 200-26, which I understand are rebranded Linksys switches. Is this caused by a problem with the switches? Is it the switch configurations? Are the Cisco switches incapable of handling this? I don't see where the configuration is located; I searched the usual /etc/sysconfig/network/devices but there's nothing in there about options (like mii polling) and nothing about the method of balancing the two. Searching scripts, I can't find anything in /etc/init.d/network either. The hosts are almost all Red Hat Enterprise Linux 5.x systems (5.6, 5.7) but some are Ubuntu Server 10.04.3 Lucid Lynx. I need help with both if it comes to that. UPDATE: We're also seeing some problems with servers on the original switches. The HP switches and the Cisco switches are also interconnected (temporarily); there is a cable run from one switch to the next. Pings on any of these hosts show about one ICMP packet out of every 5-6 getting dropped (timed out). Could there be an interaction between the two switches? Oh, and the hosts are using bonding with Balance-RR as the method.

  Read the article

• Reliable file copy (move) process - mostly Unix/Linux

  - by mfinni

  Short story : We have a need for a rock-solid reliable file mover process. We have source directories that are often being written to that we need to move files from. The files come in pairs - a big binary, and a small XML index. We get a CTL file that defines these file bundles. There is a process that operates on the files once they are in the destination directory; that gets rid of them when it's done. Would rsync do the best job, or do we need to get more complex? Long story as follows : We have multiple sources to pull from : one set of directories are on a Windows machine (that does have Cygwin and an SSH daemon), and a whole pile of directories are on a set of SFTP servers (Most of these are also Windows.) Our destinations are a list of directories on AIX servers. We used to use a very reliable Perl script on the Windows/Cygwin machine when it was our only source. However, we're working on getting rid of that machine, and there are other sources now, the SFTP servers, that we cannot presently run our own scripts on. For security reasons, we can't run the copy jobs on our AIX servers - they have no access to the source servers. We currently have a homegrown Java program on a Linux machine that uses SFTP to pull from the various new SFTP source directories, copies to a local tmp directory, verifies that everything is present, then copies that to the AIX machines, and then deletes the files from the source. However, we're finding any number of bugs or poorly-handled error checking. None of us are Java experts, so fixing/improving this may be difficult. Concerns for us are: With a remote source (SFTP), will rsync leave alone any file still being written? Some of these files are large. From reading the docs, it seems like rysnc will be very good about not removing the source until the destination is reliably written. Does anyone have experience confirming or disproving this? Additional info We will be concerned about the ingestion process that operates on the files once they are in the destination directory. We don't want it operating on files while we are in the process of copying them; it waits until the small XML index file is present. Our current copy job are supposed to copy the XML file last. Sometimes the network has problems, sometimes the SFTP source servers crap out on us. Sometimes we typo the config files and a destination directory doesn't exist. We never want to lose a file due to this sort of error. We need good logs If you were presented with this, would you just script up some rsync? Or would you build or buy a tool, and if so, what would it be (or what technologies would it use?) I (and others on my team) are decent with Perl.

  Read the article

• Oracle data warehouse design - fact table acting as a dimension?

  - by Elizabeth

  THANKS: Both answers here are very helpful, but I could only pick one. I really appreciate the advice! our datawarehouse will be used more for workflow reports than traditional analytical reports. Our users care about "current picture" far more than history. (though history matters, too.) We are a government entity that does not have costs or related calculations. Mostly just counts of people within given locations and with related history. We are using Oracle, and I have found distinct advantage in using the star join whenever possible and would like to rearchitect everything to as closely resemble the star schema as is reasonable for our business uses. Speed in this DW is vital, and a number of tests have already proven the star schema approach to me. Our "person" table is key - it contains over 4 million records and will be the most frequently used source in queries. It can be seen at the center of a star with multiple dimensions (like age, gender, affiliation, location, etc.). It is a very LONG table, particularly when I join it to the address and contact information. However, it is more like a dimension table when we start looking at history. For example, there are two different history tables that have a person key pointing to the person table. One has over 20 million records and the other has almost 50 million and grows daily. Is this table a fact table or a dimension table? Can one work as both? If so, is that going to be a big performance problem? Is it common to query more off of a dimension than a fact? What happens if a DIFFERENT fact table that uses the person table as a dimension is actually only 60,000 records (much smaller.). I think my problem is that our data and use of it does not fit with the commonly use examples of star schemas. CLARIFICATION: Some good thoughts have been added below, but perhaps I left too much out to really explain well. Here's some more info: We handle a voter database. We don't have any measures except voter counts by various groups: voter counts by party, by age, by location; voter counts by ballot type and election, by ballot status and election, etc. We do have a "voting history" log as well as an activity audit log (change of address, party, etc.). We have information on which voters are election workers and all that related information. I figure I'll get to the peripheral stuff later. For now I'm focusing on our two major "business processes": voter registration(which IS a voter.) and election turnout. In the first, voter is a fact. In the second, voter is a dimension, along with party, election, and type of ballot. (and in case anyone is worried - no we don't know HOW people vote. Just that they do. LOL ) I hope that clarifies things a bit.

  Read the article

• C program runs in Cygwin but not Linux (Malloc)

  - by Shawn

  I have a heap allocation error that I cant spot in my code that is picked up on vanguard/gdb on Linux but runs perfectly on a Windows cygwin environment. I understand that Linux could be tighter with its heap allocation than Windows but I would really like to have a response that discovers the issue/possible fix. I'm also aware that I shouldn't typecast malloc in C but it's a force of habit and doesn't change my problem from happening. My program actually compiles without error on both Linux & Windows but when I run it in Linux I get a scary looking result: malloc.c:3074: sYSMALLOc: Assertion `(old_top == (((mbinptr) (((char *) &((av)-bins[((1) - 1) * 2])) - __builtin_offsetof (struct malloc_chunk, fd)))) && old_size == 0) || ((unsigned long) (old_size) = (unsigned long)((((__builtin_offsetof (struct malloc_chunk, fd_nextsize))+((2 * (sizeof(size_t))) - 1)) & ~((2 * (sizeof(size_t))) - 1))) && ((old_top)-size & 0x1) && ((unsigned long)old_end & pagemask) == 0)' failed. Aborted Attached snippet from my code that is being pointed to as the error for review: /* Main */ int main(int argc, char * argv[]) { FILE *pFile; unsigned char *buffer; long int lSize; pFile = fopen ( argv[1] , "r" ); if (pFile==NULL) {fputs ("File error on arg[1]",stderr); return 1;} fseek (pFile , 0 , SEEK_END); lSize = ftell (pFile); rewind (pFile); buffer = (char*) malloc(sizeof(char) * lSize+1); if (buffer == NULL) {fputs ("Memory error",stderr); return 2;} bitpair * ppairs = (bitpair *) malloc(sizeof(bitpair) * (lSize+1)); //line 51 below calcpair(ppairs, (lSize+1)); /* irrelevant stuff */ fclose(pFile); free(buffer); free(ppairs); } typedef struct { long unsigned int a; //not actual variable names... Yes I need them to be long unsigned long unsigned int b; long unsigned int c; long unsigned int d; long unsigned int e; } bitpair; void calcpair(bitpair * ppairs, long int bits); void calcPairs(bitpair * ppairs, long int bits) { long int i, top, bot, var_1, var_2; int count = 0; for(i = 0; i < cs; i++) { top = 0; ppairs[top].e = 1; do { bot = count; count++; } while(ppairs[bot].e != 0); ppairs[bot].e = 1; var_1 = bot; var_2 = top; calcpair * bp = &ppairs[var_2]; bp->a = var_2; bp->b = var_1; bp->c = i; bp = &ppairs[var_1]; bp->a = var_2; bp->b = var_1; bp->c = i; } return; } gdb reports: free(): invalid pointer: 0x0000000000603290 * valgrind reports the following message 5 times before exiting due to "VALGRIND INTERNAL ERROR" signal 11 (SIGSEGV): Invalid read of size 8 ==2727== at 0x401043: calcPairs (in /home/user/Documents/5-3/ubuntu test/main) ==2727== by 0x400C9A: main (main.c:51) ==2727== Address 0x5a607a0 is not stack'd, malloc'd or (recently) free'd

  Read the article

• Part 7: EBS Modifications and Flagged Files in R12

  - by volker.eckardt(at)oracle.com

  Let me, based on my previous blog, explain the procedure of flagged files a bit better and facilitate the same with screenshots. Flagged files is a concept within the Oracle eBusiness Suite (EBS) release 12, where you flag a standard deployment file, let’s say a Forms file, a Package or a Java class file. When you run the patch analyse, the list of flagged files will be checked and in case one of these files gets patched, the analyse report will tell you. Note: This functionality is also available in release 11, here it is implemented and known as “applcust.txt”. You can flag as many files as you want, in whatever relationship they are with your customizations. In addition to the flag itself you can add a comment. You should use this comment to point to your customization reference (here XXAR_RPT_066 or XXAP_CUST_030). Consider the following two cases: You have created your own report, based on a standard report. In this case you will flag the report file itself, and the key views used. When a patch updates one of these files, you will be informed and can initiate a proper review and testing. (ex.: first line for ARXCTA.rdf) You have created an extensive personalization and because it is business critical you like to be informed if the page definition gets updated. In this case you register the PG.xml file as flagged file. (ex.: second line below for CreateExtBankAcctPG.xml) The menu path to register flagged files is the following: (R) System Administrator > (M) Oracle Applications Manager > Site Map > Maintenance > Register Flagged Files     Your DBA should now run the Patch Analyse every time he is going to apply a new patch. (R) System Administrator > (M) Oracle Applications Manager > Patch Wizard > Task “Recommend/Analyze Patches” The screenshot above shows the impact summary. For this blog entry the number “2” titled “Flagged Files Changed“ is in our focus. When you click the “2” you will get a similar screen like the first in this blog, showing you exactly the files which will get patched if you continue and apply this patch in this environment right now. Note: It is also shown that just 20% of all patch files will get applied. This situation might be different in case your environments are on a different patch level. For sure also the customization impact might then be different. The flagging step can be done directly in the Oracle Applications Manager.  Our developers are responsible for. To transport such a flag+comment we use a FNDLOAD script. It is suggested to put the flagged files data file directly into your CEMLI patch. Herewith the flagged files registration will be executed right at the same time when the patch gets applied. Process Steps: Developer: Builds CEMLI Reviews code and identifies key standard objects referenced Determines standard object files and flags them Creates FNDLOAD file and adds the same to the CEMLI patch DBA: Executes for every new Oracle standard patch the patch analyse in a representative environment Checks and retrieves the flagged files and comments Sends flagged file list back to development team for analyse / retest Developer: Analyses / Updates / Retests effected CEMLIs Prerequisite: The patch analyse has to be executed in an environment where flagged files have been registered. (If you run the patch analyse in a vanilla or outdated environment (compared to your PROD), the analyse will not be so helpful!) When to start with Flagged files? Start right now utilizing this feature. It is an invest to improve the production stability and fulfil your SLA!   Summary Flagged Files is a very helpful EBS R12 technique when analysing patches. Implement a procedure within your development process to maintain such flags. Let the DBA run the patch analyse in an environment with a similar patch and customization level as your current production.   Related Links: EBS Patching Procedures - Chapter 2-13 - Registered Flagged Files

  Read the article

< Previous Page | 769 770 771 772 773 774 775 776 777 778 779 780  | Next Page >