Search Results

Search found 22641 results on 906 pages for 'case'.

Page 774/906 | < Previous Page | 770 771 772 773 774 775 776 777 778 779 780 781  | Next Page >

• Sorting a very large text file in Java

  - by Alice

  Hi, I have a large text file I need to sort in Java. The format is: word [tab] frequency [new line] The algorithm for sorting is: Read some of the file, filtering for purlely alphabetic words. Once you have X number of alphabetic words, call Collections.sort and write the result to a file. Repeat until you have finished reading the file. Start reading two sorted files, comparing line by line for the word with higher frequency, and writing at the same time to a new file as to not load much into your memory Repeat until all files are merged into one large file Right now I've divided the large file into smaller ones (sorted by descending frequency) with 10,000 lines each. I know I need to somehow merge these files back together, but I'm not sure how to go about this. I've created a LinkedList to keep track of all the files created. The algorithm says to compare each line in the two files, except I've tried a case where , say file1 = 8,6,5,3,1 and file2 = 9,8,8,8,8. Then if I compare them line by line I would get file3 = 9,8,8,6,8,5,8,3,8,1 which is incorrectly sorted (they should be in decreasing order). I think I'm misunderstanding some part of the algorithm. If someone could point out what I should do instead, I'd greatly appreciate it. Thanks. edit: Yes this is an assignment. We aren't allowed to increase memory unfortunately :(

  Read the article

• initalizing two pointers to same value in "for" loop

  - by MCP

  I'm working with a linked list and am trying to initalize two pointers equal to the "first"/"head" pointer. I'm trying to do this cleanly in a "for" loop. The point of all this being so that I can run two pointers through the linked list, one right behind the other (so that I can modify as needed)... Something like: //listHead = main pointer to the linked list for (blockT *front, *back = listHead; front != NULL; front = front->next) //...// back = back->next; The idea being I can increment front early so that it's one ahead, doing the work, and not incrementing "back" until the bottom of the code block in case I need to backup in order to modify the linked list... Regardless as to the "why" of this, in addition to the above I've tried: for (blockT *front = *back = listHead; /.../ for (blockT *front = listHead, blockT *back = listHead; /.../ I would like to avoid pointer to a pointer. Do I just need to initialize these before the loop? As always, thanks!

  Read the article

• Random Loss of precision in Python ReadLine()

  - by jackyouldon

  Hi all, We have a process which takes a very large csv (1.6GB) and breaks it down into pieces (in this case 3). This runs nightly and normally doesn't give us any problems. When it ran last night, however, the first of the output files had lost precision on the numeric fields in the data. The active ingredient in the script are the lines: while lineCounter <= chunk: oOutFile.write(oInFile.readline()) lineCounter = lineCounter + 1 and the normal output might be something like StringField1; StringField2; StringField3; StringField4; 1000000; StringField5; 0.000054454 etc. On this one occasion and in this one output file the numeric fields were all output with 6 zeros at the end i.e. StringField1; StringField2; StringField3; StringField4; 1000000.000000; StringField5; 0.000000 We are using Python v2.6 (and don't want to upgrade unless we really have to) but we can't afford to lose this data. Does anyone have any idea why this might have happened? If the readline is doing some kind of implicit conversion is there a way to do a binary read, because we really just want this data to pass through untouched? It is very wierd to us that this only affected one of the output files generated by the same script, and when it was rerun the output was as expected. thanks Jack

  Read the article

• Very Urgent :How to start a new session if a user click on the new tab in IE or mozilla on websphere

  - by ha22109

  Hi, I have one "user search" portlet on the home page of one application running on websphere portal server.Which display the matching user records as per the search criteria filled in the search form.I have requirement to have a "back to search input" link on the results page which onclick should show the filled form on the input jsp. The issue which i am facing is if i open the application in two diff tab of same IE browser and start giving some search criteria and submit and same time search for some other input from other IE tab (in the same browser)and then go back to previous tab and click on "back to search input" link then instead of showing me the first input it will show me the imput which i entered in the next IE tab. I am setting and getting the bean(form bean) through portlet session.but in the two diff tab of same IE it will be the sae user session (and may be the same portlet session..) Please tell me solution for this. The one thing to be notice here is i can access this "user search" application even without doing login also.so it must be taking the default portlet session in this case. what wil happen once i login and then search,will it going to overwrite the portlet session and http session or howz is that?

  Read the article

• MS 70-536 .NET Framework Foundation - info on Exam? Especially regex?

  - by Sebastian P.R. Gingter

  Hi, I know there are already some questions about this, but not that specific. I have the self-paced training kit and worked through the test exam tool that is on the CD coming with the book. I constantly fail on the test tool, mostly on the regex questions. I'm not a regex guru. In fact my regex-fu is more than weak. I know what regex'es are, how I can use them and where my 'Regular expressions - kurz und gut' book is in my drawer in case I really need them. And to be honest I feel like learning regex is a total waste of time, because if I need them I have either a colleague that is fit and can do them in just a few seconds or I need my book and get them right in a still fair amount of time. And from my experience I can tell that I need regex like once in two or three years. So just putting in a lot of time into learning just the expressions to pass the exam is.. something I like not to have to do. Can you tell me something about the real exam vs. the test exam tool on the book and about the need to know regex for passing it? Thank you for your time. Marked as Community Wiki. Hope that fits?

  Read the article

• While in a transaction, how can reads to an affected row be prevented until the transaction is done?

  - by Mahn

  I'm fairly sure this has a simple solution, but I haven't been able to find it so far. Provided an InnoDB MySQL database with the isolation level set to SERIALIZABLE, and given the following operation: BEGIN WORK; SELECT * FROM users WHERE userID=1; UPDATE users SET credits=100 WHERE userID=1; COMMIT; I would like to make sure that as soon as the select inside the transaction is issued, the row corresponding to userID=1 is locked for reads until the transaction is done. As it stands now, UPDATEs to this row will wait for the transaction to be finished if it is in process, but SELECTs simply will read the previous value. I understand this is the expected behaviour in this case, but I wonder if there is a way to lock the row in such a way that SELECTs will also wait until the transaction is finished to return the values? The reason I'm looking for that is that at some point, and with enough concurrent users, it could happen that while the previous transaction is in process someone else reads the "credits" to calculate something else. Ideally the code run by that someone else should wait for the transaction to finish to use the new value, because otherwise it could lead to irreversible desync issues. Note that I don't want to lock the entire table for reads, just the specific row. Also, I could add a boolean "locked" field to the tables and set it to 1 every time I'm starting a transaction but I don't really feel this is the most elegant solution here, unless there is absolutely no other way to handle this through mysql directly.

  Read the article

• Has inheritance become bad?

  - by mafutrct

  Personally, I think inheritance is a great tool, that, when applied reasonably, can greatly simplify code. However, I seems to me that many modern tools dislike inheritance. Let's take a simple example: Serialize a class to XML. As soon as inheritance is involved, this can easily turn into a mess. Especially if you're trying to serialize a derived class using the base class serializer. Sure, we can work around that. Something like a KnownType attribute and stuff. Besides being an itch in your code that you have to remember to update every time you add a derived class, that fails, too, if you receive a class from outside your scope that was not known at compile time. (Okay, in some cases you can still work around that, for instance using the NetDataContract serializer in .NET. Surely a certain advancement.) In any case, the basic principle still exists: Serialization and inheritance don't mix well. Considering the huge list of programming strategies that became possible and even common in the past decade, I feel tempted to say that inheritance should be avoided in areas that relate to serialization (in particular remoting and databases). Does that make sense? Or am messing things up? How do you handle inheritance and serialization?

  Read the article

• Difference between the address space of parent process and its child process in Linux?

  - by abbas1707

  Hi, I am confused about it. I have read that when a child is created by a parent process, child gets a copy of its parent's address space. What it means here by copy? If i use code below, then it prints same addresses of variable 'a' which is on heap in all cases. i.e in case of child and parent. So what is happening here? #include <sys/types.h> #include <stdio.h> #include <unistd.h> #include <stdlib.h> int main () { pid_t pid; int *a = (int *)malloc(4); printf ("heap pointer %p\n", a); pid = fork(); if (pid < 0) { fprintf (stderr, "Fork Failed"); exit(-1); } else if (pid == 0) { printf ("Child\n"); printf ("in child heap pointer %p\n", a); } else { wait (NULL); printf ("Child Complete\n"); printf ("in parent heap pointer %p\n", a); exit(0); } }

  Read the article

• (Python/Pyramid) Better ways to have standard list/form editors?

  - by badcat

  I'm working on a number of Pyramid (former Pylons) projects, and often I have the need to display a list of some content (let's say user accounts, log entries or simply some other data). A user should be able to paginate through the list, click on a row and get a form where he/she can edit the contents of that row. Right now I'm always re-inventing the wheel by having Mako templates which use webhelpers for the pagination, Jquery UI for providing a dialog and I craft the editor form and AJAX requests on the client and server side by hand. As you may know, this eats up painfully much time. So what I'm wondering is: Is there a better way of providing lists, editor dialog and server/client communication about this, without having to re-invent the wheel every time? I heard Django takes off a big load of that by providing user accounts and other stuff out of the box; but in my case it's not just about user accounts, it can be any kind of data that is stored on the server-side in a SQL database, which should be able to be edited by a user. Thanks in advance!

  Read the article

• Casting/dereferencing member variable pointer from void*, is this safe?

  - by Damien

  Hi all, I had a problem while hacking a bigger project so I made a simpel test case. If I'm not omitting something, my test code works fine, but maybe it works accidentally so I wanted to show it to you and ask if there are any pitfalls in this approach. I have an OutObj which has a member variable (pointer) InObj. InObj has a member function. I send the address of this member variable object (InObj) to a callback function as void*. The type of this object never changes so inside the callback I recast to its original type and call the aFunc member function in it. In this exampel it works as expected, but in the project I'm working on it doesn't. So I might be omitting something or maybe there is a pitfall here and this works accidentally. Any comments? Thanks a lot in advance. (The problem I have in my original code is that InObj.data is garbage). #include <stdio.h> class InObj { public: int data; InObj(int argData); void aFunc() { printf("Inside aFunc! data is: %d\n", data); }; }; InObj::InObj(int argData) { data = argData; } class OutObj { public: InObj* objPtr; OutObj(int data); ~OutObj(); }; OutObj::OutObj(int data) { objPtr = new InObj(data); } OutObj::~OutObj() { delete objPtr; } void callback(void* context) { ((InObj*)context)->aFunc(); } int main () { OutObj a(42); callback((void*)a.objPtr); }

  Read the article

• Compression Program in C

  - by Delandilon

  I want to compress a series of characters. For example if i type Input : FFFFFBBBBBBBCCBBBAABBGGGGGSSS (27 x 8 bits = 216 bits) Output: F5B7C2B3A2B2G5S3 (14 x 8 bits = 112bits) So far this is what i have, i can count the number of Characters in the Array. But the most important task is to count them in the same sequence. I can't seem to figure that out :( Ive stared doing C just a few weeks back, i have knowledge on Array, pointers, ASCII value but in any case can't seem to count these characters in a sequence. Ive try a bit of everything. This approach is no good but it the closest i came to it. #include <stdio.h> #include <conio.h> int main() { int charcnt=0,dotcnt=0,commacnt=0,blankcnt=0,i, countA, countB; char str[125]; printf("*****String Manipulations*****\n\n"); printf("Enter a string\n\n"); scanf("%[^'\n']s",str); printf("\n\nEntered String is \" %s \" \n",str); for(i=0;str[i]!='\0';i++) { // COUNTING EXCEPTION CHARS if(str[i]==' ') blankcnt++; if(str[i]=='.') dotcnt++; if(str[i]==',') commacnt++; if (str[i]=='A' || str[i]=='a') countA++; if (str[i]=='B' || str[i]=='b') countA++; } //PRINT RESULT OF COUNT charcnt=i; printf("\n\nTotal Characters : %d",charcnt); printf("\nTotal Blanks : %d",blankcnt); printf("\nTotal Full stops : %d",dotcnt); printf("\nTotal Commas : %d\n\n",commacnt); printf("A%d\n", countA); }

  Read the article

• Difference dynami static 2d array c++

  - by snorlaks

  Hello, Im using opensource library called wxFreeChart to draw some XY charts. In example there is code which uses static array as a serie : double data1[][2] = { { 10, 20, }, { 13, 16, }, { 7, 30, }, { 15, 34, }, { 25, 4, }, }; dataset-AddSerie((double *) data1, WXSIZEOF(dynamicArray)); WXSIZEOF ismacro defined like: sizeof(array)/sizeof(array[0]) In this case everything works great but in my program Im using dynamic arrays (according to users input). I made a test and wrotecode like below: double **dynamicArray = NULL; dynamicArray = new double *[5] ; for( int i = 0 ; i < 5 ; i++ ) dynamicArray[i] = new double[2]; dynamicArray [0][0] = 10; dynamicArray [0][1] = 20; dynamicArray [1][0] = 13; dynamicArray [1][1] = 16; dynamicArray [2][0] = 7; dynamicArray [2][1] = 30; dynamicArray [3][0] = 15; dynamicArray [3][1] = 34; dynamicArray [4][0] = 25; dynamicArray [4][1] = 4; dataset-AddSerie((double *) *dynamicArray, WXSIZEOF(dynamicArray)); But it doesnt work correctly. I mean point arent drawn. I wonder if there is any possibility that I can "cheat" that method and give it dynamic array in way it understands it and will read data from correct place thanks for help

  Read the article

• why the exception is not caught?

  - by Álvaro García

  I have the following code: List<MyEntity> lstAllMyRecords = miDbContext.MyEntity.ToList<MyEntity>(); foreach MyEntity iterator in lstMainRecord) { tasks.Add( TaskEx.Run(() => { try { checkData(lstAllMyRecords.Where(n => n.IDReference == iterator.IDReference).ToList<MyEntity>()); } catch CustomRepository ex) { //handle my custom repository } catch (Exception) { throw; } }) ); }//foreach Task.WaitAll(tasks.ToArray()); I get all the records from my data base and in the foreach loop, I group all the records that have the same IDReference. Thenk I check if the data is correct with the method chekData. The checkData method throw a custom exception if something is wrong. I would like to catch this exception to handle it. But the problem is that with this code the exceptions are not caught and all seem to work without errors, but I know that this is not true. I try to check only one group of records that I know that has problems. If I check only one group of registrers, the loop is execute once and then only task is created. In this case the exception is caught, but if I have many groups, then any exception s thrwon. Why when I only have one task the exception is caught and with many groups are not? Thanks.

  Read the article

• How do I simplify my code?

  - by Mitchell Skurnik

  I just finished creating my first major application in C#/Silverlight. In the end the total line count came out to over 12,000 lines of code. Considering this was a rewrite of a php/javascript application I created 2 years that was over 28,000 lines I am actually quite proud of my accomplishment. After reading many questions and answers here on stackoverflow and other sites online, I followed many posters advice: I created classes, procedures, and such for things that I would have a year ago copied and pasted; I created logic charts to figure out complex functions; making sure there are no crazy hidden characters (used tabs instead of spaces); and a few others things; place comments where necessary (I have lots of comments). My application consists of 4 tiles laid out horizontally that have user controls loaded into each slice. You can have between one and four slices loaded at anytime. If you have once slice loaded, the slice takes up the entire artboard...if you have 2 loaded, each take up half, 3 a third, 4 a quarter. Each one of these slices represent (for the sake of this example) a light control. Each slice has 3 slider controls in it. Now when I coded the functionality of the sliders, I used a switch/case statement inside of a public function that would run the command on the specified slice/slider. The made for some duplicate code but I saw no way around it as each slice was named differently. So I would do slice1.my.commands(); slice2.my.commands(); etc. My question to you is how do I clean up my code even futher? (Sadly I cannot post any of my code). Is there any way to take this repetion out of my code?

  Read the article

• Int Showing as Long Odd Value

  - by Josh Kahane

  Hi I am trying to send an int in my iphone game for game center multiplayer. The integer is coming up and appearing as an odd long integer value rather than the expected one. I have this in my .h: typedef enum { kPacketTypeScore, } EPacketTypes; typedef struct { EPacketTypes type; size_t size; } SPacketInfo; typedef struct { SPacketInfo packetInfo; int score; } SScorePacket; Then .m: Sending data: scoreData *score = [scoreData sharedData]; SScorePacket packet; packet.packetInfo.type = kPacketTypeScore; packet.packetInfo.size = sizeof(SScorePacket); packet.score = score.score; NSData* dataToSend = [NSData dataWithBytes:&packet length:packet.packetInfo.size]; NSError *error; [self.myMatch sendDataToAllPlayers: dataToSend withDataMode: GKMatchSendDataUnreliable error:&error]; if (error != nil) { // handle the error } Receiving: SPacketInfo* packet = (SPacketInfo*)[data bytes]; switch (packet->type) { case kPacketTypeScore: { SScorePacket* scorePacket = (SScorePacket*)packet; scoreData *score = [scoreData sharedData]; [scoreLabel setString:[NSString stringWithFormat:@"You: %d Challenger: %d", score.score, scorePacket]]; break; } default: CCLOG(@"received unknown packet type %i (size: %u)", packet->type, packet->size); break; } Any ideas? Thanks.

  Read the article

• Pass 2-dimensional array trough view

  - by Mikael

  Hi, I'm trying to print a 2-dimensional array but can't figure it out. My controller uses this code: public ActionResult Test(string str) { DateTimeOffset offset = new DateTimeOffset(DateTime.Now); offset = offset.AddHours(-5); string[,] weekDays = new string[7,2]; for (int i = 0; i < 7; i++) { weekDays[i,0] = String.Format("{0:yyyy-MM-dd:dddd}", offset); //Date weekDays[i,1] = String.Format("{0:dddd}", offset); //Text offset = offset.AddHours(24); } weekDays[0,1] = "Today"; ViewData["weekDays"] = weekDays; return View(); } Now I wan't to print this array of weekdays as a dropdown-list and i thought this would work: <% foreach (var item in (string[,])ViewData["weekDays"]) { %> <option value=" <%= item[0] %> "> <%= item[1] %> </option> <% } %> But that's not the case, this code output just the first char of the string. So anyone got a suggestion? Thanks! /M

  Read the article

• Error in value of default parameter [Bug in Visual C++ 2008?]

  - by HellBoy

  I am facing following issue while trying to use template in my code I have some C++ code which i call from C functions. Problem is I am getting different values in the following code for statement 1 and 2. Type id : unsigned int statement 1 : 4 statement 2 : 1 C++ Code : template <typename T> void func(T* value, unsigned int len = sizeof(T)) { cout << "Type id : " << typeid(T).name() << endl; cout << "statement 1 " << sizeof(T) << endl; cout << "statement 2 " << len << endl; } template <typename T> void func1(T data) { T val = data; func(&val); } C Code : void test(void *ptr, unsigned int len) { switch(len) { case 1: func1(*(static_cast<uint32_t *>(ptr)) break; } } This happens only on windows. On Linux it works fine.

  Read the article

• Events fired when you change the contents of a control in Silverlight

  - by nyxtom

  Assuming I change the contents of a control using a XamlReader and add the UIElement to the container of a control, what events are supposed to fire? There are times where the SizeChanged will fire, LayoutUpdated changing.. though there are other times where neither of these occur despite having changing the contents of a control. In my case, I am generating a thumbnail view of what's currently in view on a page. The user can change the content of the page and thus the thumbnail should update accordingly. Though, wiring to the LayoutUpdated, Loaded, SizeChanged aren't always reliable for when the contents have changed. I would just call my InvalidateThumbnail which uses a writeablebitmap, but it's too quick after setting the content and as a result I will get a blank thumbnail. At the moment, my hack (cringes) was to wait a few milliseconds before the UI is done rendering the actual new content and I can reliably create the thumbnail. I'd rather just trigger on an event every time though. Possible? What events should I look at? I've seen CompositeTarget.Rendering but that's not what I want.

  Read the article

• cURL/PHP Request Executes 50% of the Time

  - by makavelli

  After searching all over, I can't understand why cURL requests issued to a remote SSL-enabled host are successful only 50% or so of the time in my case. Here's the situation: I have a sequence of cURL requests, all of them issued to a HTTPS remote host, within a single PHP script that I run using the PHP CLI. Occasionally when I run the script the requests execute successfully, but for some reason most of the times I run it I get the following error from cURL: * About to connect() to www.virginia.edu port 443 (#0) * Trying 128.143.22.36... * connected * Connected to www.virginia.edu (128.143.22.36) port 443 (#0) * successfully set certificate verify locations: * CAfile: none CApath: /etc/ssl/certs * error:140943FC:SSL routines:SSL3_READ_BYTES:sslv3 alert bad record mac * Closing connection #0 If I try again a few times I get the same result, but then after a few tries the requests will go through successfully. Running the script after that again results in an error, and the pattern continues. Researching the error 'alert bad record mac' didn't give me anything helpful, and I hesitate to blame it on an SSL issue since the script still runs occasionally. I'm on Ubuntu Server 10.04, with php5 and php5-curl installed, as well as the latest version of openssl. In terms of cURL specific options, CURLOPT_SSL_VERIFYPEER is set to false, and both CURLOPT_TIMEOUT and CURLOPT_CONNECTTIMEOUT are set to 4 seconds. Further illustrating this problem is the fact that the same exact situation occurs on my Mac OS X dev machine - the requests only go through ~50% of the time.

  Read the article

• How does git fetches commits associated to a file ?

  - by liadan

  I'm writing a simple parser of .git/* files. I covered almost everything, like objects, refs, pack files etc. But I have a problem. Let's say I have a big 300M repository (in a pack file) and I want to find out all the commits which changed /some/deep/inside/file file. What I'm doing now is: fetching last commit finding a file in it by: fetching parent tree finding out a tree inside recursively repeat until I get into the file additionally I'm checking hashes of each subfolders on my way to file. If one of them is the same as in commit before, I assume that file was not changed (because it's parent dir didn't change) then I store the hash of a file and fetch parent commit finding file again and check if hash change occurs if yes then original commit (i.e. one before parent) was changing a file And I repeat it over and over until I reach very first commit. This solution works, but it sucks. In worse case scenario, first search can take even 3 minutes (for 300M pack). Is there any way to speed it up ? I tried to avoid putting so large objects in memory, but right now I don't see any other way. And even that, initial memory load will take forever :( Greets and thanks for any help!

  Read the article

• Conflict with @Html.LabelFor and W3C Validator?

  - by Tyler

  I have a model that I am using to present an index of a model from a database and have given a display name to some of the rows that may need spaces in them, (I.e. "weekstarting" in a db would be given a display name of "Week Starting"). So I set the display name for my model like this: [DisplayName("Week Starting")] public DateTime WeekStarting { get; set; } and then in the table headers for my table I use the following line of code to display the field name using its given display name: @Html.LabelFor(x => x.First().WeekStarting) The above all works fine. But I am using the W3C validator and it is giving me the following error for the example I have given: The for attribute of the label element must refer to a form control. Forgive me if it is obvious but what am I doing wrong here? I am not using a form I am simply displaying an index of items in a table. I have tried to look for an answer and saw someone suggest that the form controls being referred to need ids (even though I'm not using a form) but this would not be applicable in this instance because if I tried to set an id in the index it would be duplicated with each item in the index: foreach (var item in Model.Tbms) { <tr><td>@item.value</td><tr>.... would be repeated for each item, and also unsure where I would put the id in any case, the td? } Or is there a better way to label the field header, with my preferred display name in the first place? I guess I could just swap @Html.LabelFor... for Hard code field name but do I have to?

  Read the article

• How to combine two rows and calculate the time difference between two timestamp values in MySQL?

  - by Nadar

  I have a situation that I'm sure is quite common and it's really bothering me that I can't figure out how to do it or what to search for to find a relevant example/solution. I'm relatively new to MySQL (have been using MSSQL and PostgreSQL earlier) and every approach I can think of is blocked by some feature lacking in MySQL. I have a "log" table that simply lists many different events with their timestamp (stored as datetime type). There's lots of data and columns in the table not relevant to this problem, so lets say we have a simple table like this: CREATE TABLE log ( id INT NOT NULL AUTO_INCREMENT, name VARCHAR(16), ts DATETIME NOT NULL, eventtype VARCHAR(25), PRIMARY KEY (id) ) Let's say that some rows have an eventtype = 'start' and others have an eventtype = 'stop'. What I want to do is to somehow couple each "startrow" with each "stoprow" and find the time difference between the two (and then sum the durations per each name, but that's not where the problem lies). Each "start" event should have a corresponding "stop" event occuring at some stage later then the "start" event, but because of problems/bugs/crashed with the data collector it could be that some are missing. In that case I would like to disregard the event without a "partner". That means that given the data: foo, 2010-06-10 19:45, start foo, 2010-06-10 19:47, start foo, 2010-06-10 20:13, stop ..I would like to just disregard the 19:45 start event and not just get two result rows both using the 20:13 stop event as the stop time. I've tried to join the table with itself in different ways, but the key problems for me seems to be to find a way to correctly identify the corresponding "stop" event to the "start" event for the given "name". The problem is exactly the same as you would have if you had table with employees stamping in and out of work and wanted to find out how much they actually were at work. I'm sure there must be well known solutions to this, but I can't seem to find them...

  Read the article

• Multiple Foreign keys to a single table and single key pointing to more than one table

  - by user1216775

  I need some suggestions from the database design experts here. I have around six foreign keys into a single table (defect) which all point to primary key in user table. It is like: defect (.....,assigned_to,created_by,updated_by,closed_by...) If I want to get information about the defect I can make six joins. Do we have any better way to do it? Another one is I have a states table which can store one of the user-defined set of values. I have defect table and task table and I want both of these tables to share the common state table (New, In Progress etc.). So I created: task (.....,state_id,type_id,.....) defect(.....,state_id,type_id,...) state(state_id,state_name,...) importance(imp_id,imp_name,...) There are many such common attributes along with state like importance(normal, urgent etc), priority etc. And for all of them I want to use same table. I am keeping one flag in each of the tables to differentiate task and defect. What is the best solution in such a case? If somebody is using this application in health domain, they would like to assign different types, states, importances for their defect or tasks. Moreover when a user selects any project I want to display all the types,states etc under configuration parameters section.

  Read the article

• I just wanted to DES 4096 bytes of data with a 128 bits key...

  - by badp

  ...and what the nice folks at OpenSSL gratiously provide me with is this. :) Now, since you shouldn't be guessing when using cryptography, I come here for confirmation: what is the function call I want to use? What I understood A 128 bits key is 16 byte large, so I'll need double DES (2 × 8 byte). This leaves me with only a few function calls: void DES_ede2_cfb64_encrypt(const unsigned char *in, unsigned char *out, long length, DES_key_schedule *ks1, DES_key_schedule *ks2, DES_cblock *ivec, int *num, int enc); void DES_ede2_cbc_encrypt(const unsigned char *input, unsigned char *output, long length, DES_key_schedule *ks1, DES_key_schedule *ks2, DES_cblock *ivec, int enc); void DES_ede2_cfb64_encrypt(const unsigned char *in, unsigned char *out, long length, DES_key_schedule *ks1, DES_key_schedule *ks2, DES_cblock *ivec, int *num, int enc); void DES_ede2_ofb64_encrypt(const unsigned char *in, unsigned char *out, long length, DES_key_schedule *ks1, DES_key_schedule *ks2, DES_cblock *ivec, int *num); In this case, I guess the function I want to call DES_ede2_cfb64_encrypt, although I'm not so sure -- I definitely don't need padding here and I'd have to care about what ivec and num are, and how I want to generate them... What am I missing?

  Read the article

• Sessions not sticking linux server

  - by Jacob Windsor

  I have just moved the dev site over to my linux server for production but the sessions don't seem to be sticking for very long. I am guessing it is the server settings and not the php because it does the same thing with the plesk panel. Whenever a script is executed the sessions seems to get unset. I see nothing in the error log so not sure what it is. It all worked fine on wamp. Anyway I uploaded the php.ini file which was in the wamp server as it had all the settings i needed and all was working on localhost. Not sure what the problem is and this is the final thing that I have to sort out before going into production. And just too add the sessions are being started as they last for a little bit just don't stick around long. Here is the relevent part of my login script just in case there is something wrong with the code: // if login is ok then we add a cookie if($flag == 0) { $pass = htmlspecialchars(mysql_real_escape_string($_POST['pass'])); $username = htmlspecialchars(mysql_real_escape_string($_POST['username'])); $_SESSION['username']=$username; $_SESSION['password']=$pass;

  Read the article

< Previous Page | 770 771 772 773 774 775 776 777 778 779 780 781  | Next Page >