Search Results

Search found 24018 results on 961 pages for 'platform specific'.

Page 774/961 | < Previous Page | 770 771 772 773 774 775 776 777 778 779 780 781  | Next Page >

• virtualized windows 2003 domain with CentOS 5.3 and poor connectivity

  - by Chris Gow

  Hi: I have a test lab set up running a virtualized windows 2003 domain on a CentOS 5.3(xen) host and am experiencing connectivity problems with guests running on other hosts that are part of the same domain. Here's the setup: On Computer A I have CentOS 5.3 running as the host and have virtualized windows 2003 servers for a primary domain controller, a backup domain controller and an exchange server. The primary domain controller also acts as a WINS and dns server. The windows domain appears on a separate subnet from my company's corporate network. Connectivity to any of the virtualized guests on Computer A is fine (remote desktop, ping, what have you). I have another host computer (Computer B) that also has a virtualized Windows 2003 server guest that is part of the same domain. However, connectivity to that guest is flaky at best. I continuously get at least 60% packet loss when I try to ping the guest, and due to that flakiness I can not access any of the services that it runs (remote desktop, web). Now here's the interesting part. It seems to affect only machines running on a different computer than the domain controller that are in the same domain. On Computer B there is another Windows 2003 guest that is not part of the test domain and is on my corporate network. There's no connectivity issues with that guest machine. The problem does not seem to be specific to Computer B either. I created a test VM on my local computer within the test domain and it exhibits the same behaviour as the guest in Computer B. A couple of items to note: - Host OS on both Computer A and B are the same CentOS 5.3 64 bit - Guest OS is Windows 2003 64 bit and 32 bit (the guest on Computer B is 32 bit) - Guest OSes are all up to date (as of Monday) - Host OS on Computer A was upgraded from CentOS 5.2 to 5.3 Update: Sorry I did not follow up with the comments from below. Computer A and B have been moved to their own dedicated switch and the problem has gone away. I'm not sure what the underlying problem(s) were though

  Read the article

• Can't mount Linux usb disk. It just create /dev/sg device but no /dev/sd

  - by MTilsted

  I have a Corsair R60 ssd disk which is a disk with both sata and usb connectors. But the usb thing seems to be a bit non-standard, or maybe its just my fedora linux. When I insert the disk using a usb cabel to a running Fedora 14 linux system, a device called /dev/sg3 is added but that is all. No new /dev/sd* device is created so I can't mount the disk. If I look at cat /proc/scsi/sg/device_strs I get ATA Hitachi HTS54321 FB2O HL-DT-ST DVDRAM GSA-T50N RP05 Seagate Desktop 0130 Corsair CSSD-R60GB2 So the disk is there. (The last entry) but my linux will for some reason not see it as a usb hard disk. When I insert other usb disks they work fine. It is only this specific disk which causes problems. I have tried on 3 different computers with the same result. A hint to the problem may be that if I add the disk to a windows system(With usb) the disk is called "A fixed disk" and not a portable disk as expected. The disk works fine with linux If i connect it with the sata cabel, but I would really like to have it working with usb too. (To mount it on computers without sata). Added: I did try to mount /dev/sg3 but mount say that its not a block device. (File say Its a character special device). Added output from dmesg: [ 97.454073] usb 7-1: USB disconnect, address 2 [ 105.913055] hub 2-0:1.0: unable to enumerate USB device on port 3 [ 107.048054] usb 2-3: new high speed USB device using ehci_hcd and address 5 [ 107.162900] usb 2-3: New USB device found, idVendor=1b1c, idProduct=1ab8 [ 107.162903] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 107.162906] usb 2-3: Product: CSSD-R60GB2 [ 107.162908] usb 2-3: Manufacturer: Corsair [ 107.162910] usb 2-3: SerialNumber: 10111441000000990069 [ 107.167651] scsi7 : usb-storage 2-3:1.0 [ 108.195543] scsi 7:0:0:0: Direct-Access Corsair CSSD-R60GB2 PQ: 1 ANSI: 0 [ 108.197732] scsi 7:0:0:0: Attached scsi generic sg3 type 0

  Read the article

• nginx logrotate config

  - by TomOP

  Whats the best way to rotate nginx logfiles? In my opinion, I should create a file "nginx" in /etc/logrotate.d/ and fill it with the following code and do a /etc/init.d/syslog restart after that. This would be my config (I havn't tested it yet): /usr/local/nginx/logs/*.log { #rotate the logfile(s) daily daily # adds extension like YYYYMMDD instead of simply adding a number dateext # If log file is missing, go on to next one without issuing an error msg missingok # Save logfiles for the last 49 days rotate 49 # Old versions of log files are compressed with gzip compress # Postpone compression of the previous log file to the next rotation cycle delaycompress # Do not rotate the log if it is empty notifempty # create mode owner group create 644 nginx nginx #after logfile is rotated and nginx.pid exists, send the USR1 signal postrotate [ ! -f /usr/local/nginx/logs/nginx.pid ] || kill -USR1 `cat /usr/local/nginx/logs/nginx.pid` endscript } I have both the access.log and error.log files in /usr/local/nginx/logs/ and want to rotate both daily. Can anyone please tell me if "dateext" is correct? I want the log filename to be something like "access.log-2010-12-04". One more thing: Can I do the log rotation every day on a specific time (e.g. 11 pm)? If so, how? Thanks.

  Read the article

• apache virtualhost: Auto subdomain with exception

  - by Ineentho

  I've been searching for a way to automatically redirect domains to a specific folder, and fond a good answer here on serverfault: Apache2 VirtualHost auto subdomain. (The accepted answer) So far everything works good, however now I need to add an exception to this. The result I want is this: http://localhost/ --> E:/websites/ http://specialDomain2/ --> E:/websites/ http://normal1.com/ --> E:/websites/normal1.com/ http://normalDomain.com/ --> E:/websites/normal2.com/ I get the expceted result for the two last domains, but the localhost doesn't work. I copied the script from the question aboved, and tried to add something like <VirtualHost *:80> RewriteEngine On RewriteMap lowercase int:tolower # if already rewitten and we have the right path, stop right here RewriteRule ^(E:/websites/[^/]+/.*)$ $1 [L] RewriteRule ^localhost/(.*)$ E:/websites/$1 [L] # <-- Added this row RewriteRule ^(.+) ${lowercase:%{SERVER_NAME}}$1 [C] RewriteRule ^(www\.)?([^/]+)/(.*)$ E:/websites/$2/$3 [L,E=VHOST_ROOT:E:/websites/$2/] </VirtualHost> I thought this would make sense, since I would translate this to if URL = localhost/* Do nothing (because of the [L] flag), and use the default document root specified earlier else continue What's wrong with this? Thanks for any help!

  Read the article

• Can My Personal GMail Query A Remote LDAP Server?

  - by Maarx

  I have a personal GMail account, from which I frequently send e-mail to a great many various users of a specific business. The corporation has been kind enough to provide me with the credentials to access their LDAP server, with which I would like my GMail web client to be able to auto-complete partial addresses or names for which that LDAP server has an entry. Is there any way I can get a personal GMail account (or it's corresponding entire Google account) account to incorporate an LDAP server into it's Contacts? If I cannot get it to query dynamically and on-demand, is there an idiot-proof way (assuming the client permits, which they may not) to query the LDAP server for it's entire database, save it, and bulk import it to GMail? Perhaps, even, something I could set to repeat periodically (weekly, perhaps), without human interaction? If I did the latter, I assume it would be trivial to import all of these contacts under a single category that could be easily manipulated from within the GMail web-based client. I have been a staunch user and supporter of the GMail web-based client since it's instantiation, but this one is kind of a deal-breaker for me. If it's impossible, what do you suggest I do?

  Read the article

• User-unique .vimrc file for servers as root user

  - by Scott

  I'm getting thrown into an IDE war at the office, where multiple users have root access on our servers, and like to have everything their own way with VIM. Unfortunately, we have our servers locked down enough to where if you want to do anything, you need to have root access. Obviously (although this is obviously frowned upon), we get tired of typing sudo before each command we type, which would require that we constantly type in our wonderfully complex passwords that are mandated on us over and over again, so naturally we all just execute the sudo su - command upon login to avoid all of this. Of course, when it comes to VIM and custom .vimrc files, we are often times stepping on someone else's custom .vimrc file, and we have some whacked out functionality in these files that users have that may overwrite functionality that we have no idea about, much less have the patience to learn either. When as root on a linux box, is there any way for all of us to still maintain our .vimrc file without having to overwrite the file over and over again every time someone wants to use VIM? Ideally, we have many virtual machines all with VIM installed, so a universal solution across all servers would be best, and we do have our Microsoft Windows user specific home directories mounted on the servers under /home/username. Any recommendations for accommodating this?

  Read the article

• Postfix connects to wrong relay?

  - by Eric

  I am trying to set up postfix on my ubuntu server in order to send emails via my isp's smtp server. I seem to have missed something because the mail.log tells me: Jan 19 11:23:11 mediaserver postfix/smtp[5722]: CD73EA05B7: to=<[email protected]>, relay=new.mailia.net[85.183.240.20]:25, delay=6.2, delays=5.7/0.02/0.5/0, dsn=4.7.0, status=deferred (SASL authentication failed; server new.mailia.net[85.183.240.20] said: 535 5.7.0 Error: authentication failed: ) The relay "new.mailia.net[85.183.240.20]:25" was not set up by me. I use "relayhost = smtp.alice.de". Why is postfix trying to connect to a different server? Here is my main.cf: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = mediaserver alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = mediaserver, localhost.localdomain, , localhost relayhost = smtp.alice.de mynetworks = 127.0.0.0/8 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all myorigin = /etc/mailname inet_protocols = all sender_canonical_maps = hash:/etc/postfix/sender_canonical smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_password smtp_sasl_security_options = noanonymous Output of postconf -n: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all inet_protocols = ipv4 mailbox_size_limit = 0 mydestination = mediaserver, localhost.localdomain, , localhost myhostname = mediaserver mynetworks = 127.0.0.0/8 myorigin = /etc/mailname readme_directory = no recipient_delimiter = relayhost = smtp.alice.de sender_canonical_maps = hash:/etc/postfix/sender_canonical smtp_generic_maps = hash:/etc/postfix/generic smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_password smtp_sasl_security_options = noanonymous smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes

  Read the article

• what is the reason behind window service stopped ,whether its due to LAN problems or any other issues

  - by Steve

  I have a windowservice which named Trunk which stopped one day i just want to know the reason behind it? this is an entry in the logs, Nov 15 17:54:04.318 :Trunk-1516:Trunk:handle_control_event:Received CTRL_LOGOFF_EVENT, ignore it Nov 25 15:54:52.157 :Trunk-1516:Trunk:ERROR - Process Restart Count (5) Exceeded for:C:\Program Files\secon\11.1.4\bin\vmd Nov 25 15:54:52.157 :Trunk-1516:Trunk:Stopping Trunk ... Nov 25 15:54:52.314 :Trunk-1516:Trunk:Shutting down, signaled C:\Program F Nov 20 15:54:20.345 :SCBridge.RegisterBridge:Exception in method: ScUtility.ScCommandException (0xa08990002): Exception from HRESULT: 0xa08990002 Supplemental Information: None available. at ScServer.ScServiceProcessorRegistryManager.Attach(String serviceProcessor, ScClientInformation clientInfo, FORCE_ATTACH_SPEC forceAttachToMaster) at ScServer.ScServiceProcessorRegistry.Attach(String serviceProcessor, Object clientInfo) at ScServer.ScServiceProcessorRegistry.Attach(String serviceProcessor) at ServerControlInterface.SCBridge.RegisterBridge(String SPName) for system APOLLOSP0 attempting to attach and register with the Bridge i had seen service is registered with specific account, so i thought that user logged off from the machine that may be the reason behind it or any LAN disconnection problem . But Having taken another look at the above entry we seem to have a constant failure being generated in vmd which causes Trunk to detect vmd requires a restart. Most of the time it works OK and the restart count is anything up to 4. In this case the Trunk log confirms that the Restart Count is 5 and so is considered to be exceeded. Presumably, this triggers the termination of the other services and Trunk is actually doing its job.So, coould this just be a timing issue and we need to increase the tolerance level (i.e restart count) or do we need to address the 0xa08990002 error in vmd?

  Read the article

• CPU operating temperature ranges

  - by osij2is

  I have an AMD Phenom II 960T with 2 cores unlocked for a total of 6 cores. I don't overclock at all. I have a Arctic Cooling ACALP64 Heatsink/Fan installed. I'm currently running ESXi 5.0 so I have to go into the BIOS to read the CPU temperatures, which at idle seem to be in the 71-74C range. To me, this is pretty high, but I cannot find any official temperature ranges that AMD says the CPU can work well within. There seems to be a lot of questions on superuser and numerous forums around CPU temperatures but no one seems to have a clear consensus as to what the manufacturer temperature ranges are for specific CPUs. I've tried searching through AMDs site to no avail. At this point, I'd be willing to shut off the 2 extra cores if it keeps the heat down but until I get some sort of tolerance or range for temperature, I have no idea if the CPU is being damaged or not. Can anyone point to a direct source, article, FAQ from AMD that specifically states their CPUs temperature range? Or are CPU temperature ranges so varying that there's no possible baseline? Am I being too paranoid about this? To me, anything over 65C is a bit much and if I'm in the low-mid 70s range with NO VMs running, what can I expect if I have several VMs running?

  Read the article

• GPO - Setting not applied, although policy is applied

  - by Kenny Bones

  This is rather strange. In our domain we have several terminal servers and this morning a user reported that no drives are mapped when he logs on to the terminal server. So, I checked Group Policy Results and compare two users. Both users have the exact same policies applied. But for this particular user, the Script section under User Configuration - Policies - Windows Settings is just not there. For the other user, which this is working fine for, it says under the Script section that Winning GPO is Terminal2008, which is the GPO that contains the script section. And the Terminal2008 GPO is applied to both users. Also, the loopback processing is set to Replace. What could be the cause for this? I've never seen this particular issue before. I mean, both users are in the same OU, they log on to the same terminal server and the same policies are applied to both. They do not however have the exact same group memberships, but should that matter? It's not stated that the script should be run only if the user is a member of a certain group either. Not sure if that could be done through that specific setting either.All I know is, the very same policies are applied to both users, in the same OU and the same computer. Meaning, the same policies should be applied? Edit: I just ran Group Policy Results on one of the other terminal servers, which are also in the same OU, and the Scripts section is there! This means that this particular user don't get this setting when he's logged onto this particular server. What could be the cause of this?

  Read the article

• Joomla performance problems on AWS

  - by Bobby Jack

  I'm running a site on AWS with the following setup: Single m1.small instance (web server) Single RDS m1.small db Joomla 1.5 Generally, the site is performant, but is fairly low-traffic - say around 50-100 visits / hour. However, at peak time, we see about double that traffic. During peak time, pretty much every day: CPU usage on the web server slowly climbs to 100% CPU usage on the RDS server climbs quite quickly to about 30%, from an average of about 15 Database connections shoot up to about 140, from a normal average of about 2 or 3 The site is then occasionally unreachable, certainly according to pingdom monitoring. Does anyone recognise this behaviour? Can you point me in the right direction to begin investigating? Of course, RDS makes it difficult to do things like slow query logging, so I've started by regularly dumping the mysql process list into a file to see if there's anything I can spot there, but it would be good to have something more concrete to investigate. UPDATE At least, can someone confirm that I'm definitely right in saying that the level of traffic implies the problem must be a specific type of query taking way longer than it should to execute? This would happen if a table gets locked, and many queries need to write to it, right? For this very reason, I've already changed the __session table type to InnoDB.

  Read the article

• network routing between mac & virtual XP

  - by Kevin

  Hi - I have a max laptop running XP inside VirtualBox. The network is setup to be a "Bridged Adapter" so that the IPs for both the host & guest OS's are assigned by my wireless routed. My guest XP has Nortel VPN connecting to corporate lan. When this is connected, I want to allow my host Mac OS to access the corporate network. But I'm struggling. Without Nortel VPN running, I can change routing on the mac so all traffic is sent via the guest XP - this works. But once I activate the VPN, this no longer works. If I try to change the routing on mac to run through the IP address assigned to the Nortel adapter, I get a "Network is unreachable" error. Below is the output from ipconfig /all on the guest XP OS. I'm beginning to believe that what I want to do is not possible because of the way Nortel secure the VPN - but before I give up I thought I'd post the problem here. Thanks, Kevin z:\eclipseworkspace\RESMobileSuite\trunk>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : zzzz-3177b42dd0 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : zzzz.zzz Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : AMD PCNET Family PCI Ethernet Adapter Physical Address. . . . . . . . . : 08-00-XX-XX-XX-XX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 Lease Obtained. . . . . . . . . . : 30 April 2010 12:22:02 Lease Expires . . . . . . . . . . : 01 May 2010 12:22:02 Ethernet adapter {8EB7A442-9683-45FB-A602-56110A4B3434}: Connection-specific DNS Suffix . : zzzz.zz Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler Miniport Physical Address. . . . . . . . . : 44-45-YY-YY-YY-YY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : XXX.4.52.62 Subnet Mask . . . . . . . . . . . : 255.255.254.0 Default Gateway . . . . . . . . . : XXX.4.52.62 DNS Servers . . . . . . . . . . . : XXX.6.21.36 XXX.6.21.100

  Read the article

• Changing time intervals for vSphere performance monitoring, and is there a better way?

  - by user991710

  I have a set of experiments running on a cluster node which is running ESXi 5.1, and I want to monitor the resource consumption on the node itself. Specifically, I am currently running experiments on a subset of the VMs on the ESXi host and wish to monitor resource consumption on those specific VMs. Right now, since I'm using only a single ESXi host, I am using vSphere to access it and the performance reports. Ideally, I would like to get these reports for different time intervals. I can already get the charts for a time interval of 1h, but these are rather long-running experiments and something like 2h, 3h,... would be preferable. However, I cannot seem to change the time interval. Here is an example of what my Customize Performance Chart dialog shows: I am also running on a trial key at the moment. How can I change this interval? Do I need a standard license, or do I just need to turn off the VM (unlikely, but I haven't attempted it yet as these are long-running experiments)? Any help (or pointers to documentation which deals with the above -- I've already looked but did not find much) would be greatly appreciated.

  Read the article

• Using Windows Explorer, how to find file names starting with a dot (period), in 7 or Vista?

  - by Chris W. Rea

  I've got a MacBook laptop in the house, and when Mac OS X copies files over the network, it often brings along hidden "dot-files" with it. For instance, if I copy "SomeUtility.zip", there will also be copied a hidden ".SomeUtility.zip" file. I consider these OS X dot-files as useless turds of data as far as the rest of my network is concerned, and don't want to leave them on my Windows file server. Let's assume these dot-files will continue to happen. i.e. Think of the issue of getting OS X to stop creating those files, in the first place, to be another question altogether. Rather: How can I use Windows Explorer to find files that begin with a dot / period? I'd like to periodically search my file server and blow them away. I tried searching for files matching ".*" but that yielded – and not unexpectedly – all files and folders. Is there a way to enter more specific search criteria when searching in Windows Explorer? I'm referring to the search box that appears in the upper-right corner of an Explorer window. Please tell me there is a way to escape my query to do what I want? (Failing that, I know I can map a drive letter and drop into a cygwin prompt and use the UNIX 'find' command, but I'd prefer a shiny easy way.)

  Read the article

• port forwarding/network settings preventing from game hosting

  - by Xitcod13

  I asked where to post this question on stackoverflow meta and they directed me here. Im on wireless connection and I want to host games in StarCraft: Brood War and i've been looking everywhere on how to accomplish that. My internet is amazingly fast so its not an internet problem (and when i play other peoples games dont experience lag) I found out that i need to have a static IP but I have already checked that i do (i downloaded a program to make my id static and it already was; The program asked for which router I used So i think it checked the router settings already) I found out that i need to allow Sc access through the firewall which i already did (i have zone-alarm but I allowed it everything possible except receiving emails lol) I have recently noticed that few people actually can join my games but most of them cannot. I dont know whats going on here. I really want to be able to host games overall how do I go about checking what is wrong with the network. Update: Alright I figured out what i did wrong in the first part I did not actually set up forwarding on the router -.- I have tried to fix my mistake. I went to forwarding options in my router (as this guide for my specific router suggests) but when i click ok I get a message incorrect ip address. 192.168.1.1 is my routers address. The default address that appears there is 192.168.1 (blank) I have set it to my computers current Ip4 adress which 192.168.1.23 I hope this works If so i will post it as an answer and mark it.

  Read the article

• PCI Tv Tuner not receiving signal

  - by C-dizzle

  I inherited an Angel II PCI Dual TV Tuner card, popped it into my computer's PCI slot, plugged in my coax cable, but am having trouble getting any type of signal to it. The computer I am using is Windows 7 Ultimate 32 bit, I know the card works because the computer recognizes it and installs the drivers, or at least I assume it works because of that. I'm trying to use Windows Media Center to watch/record tv. Here are a few things I have tried to get it working: Uninstalled/Reinstalled the newest drivers Tried hooking up an antenna to the coax input instead of my cable Instead of using cable splitter, went directly from wall output into card with coax cable Tried using different output on splitter in case the out port was bad I haven't tried a different coax cable yet, it should be fine since it's pretty new. Since this is my first time setting up a TV Tuner card, is there anything specific that I need to do with it? Is there any configuration that needs to be done on it? Do I need to have a digial receiver? I was getting pretty frustrated with it so I wanted to turn here to the experts, I'm sure someone can help me figure it out.

  Read the article

• Bad HD and robocopy

  - by acidzombie24

  After my HD gave me crc errors I wanted to copy one drive to another and picked up a new 1TB hd. I am using the command robocopy G: J: /MIR /COPYALL /ZB First it tried copying the file a few times (i didnt count, its not in my window anymore) and got an access denied error, error 5. Then it tried again and locked up. I tried copying that specific file (14mb) and windows says "cant read from source file or disk". I started robocopy again. Hopefully it will ignore it after a fail attempt or two but what options can i use to say if it doesnt work continue to the next file. It looked like that is what it was doing but for this last one it repeated more then 4times and locked up finally. I'm open to other copy solutions. I do prefer built in solutions. I am using windows 7 Also how might i do this without the /MIR option. Is /S /E good enough? flag reference here -edit- i see i can control retries with /R: but i am still open to alternative solutions.

  Read the article

• Software/hardware to build video streaming server?

  - by Sasha Yanovets

  I am looking for a video streaming server solution, something like online TV server, with ability to make live broadcasts in the internet. What software could you recommend for that? What kind of hardware it should run on, should be there anything special? I am looking for a solution that could be scaled up to at least 1000 simultaneous users online with good resolution of video. I think it is good to have general answer on what direction to choose. But here more details on my specific case: I just looking for a solution almost from scratch. We have some video content that we've produced, but it is not delivered over internet yet. We do not tied to any particular vendor for now. We want to make 24 hours of steaming three 8 hour blocks with change of content every day. We want the ability to make regular live broadcasts. I guess we will need to have several options of streaming quality (low ~56 kb/s mid ~273 kb/s). Some terms just foreign to me (like play-truncation rate), if you could point out what parameters we should avare of, it would be great. Uplink to the internet is to be determined. We plan to start from something and scale up on the way. If you are already have some kind of media streaming server, just describe its configuration here (hardware, OS, software), peak number of concurrent users it serves. I think it could help people approaching this task.

  Read the article

• Why Would one VLAN have no Communication on one Switch?

  - by Webs

  So the problem is we have a device or host that needs to communicate on a specific VLAN. This VLAN is not new, it is running all throughout our environment and works fine. But the VLAN was recently configured on the switch in question, a Cisco 3750. The DHCP server is handing out addresses on that VLAN with no problem. I have verified the cable between the host and switch and tried multiple hosts, but none of them can communicate or get an address. I plugged my laptop into an empty port which had a different VLAN assigned and immediately got a DHCP address. When I changed that port to the same VLAN I'm having issues with I got the same problem. The laptop just sits there and tries to DHCP an address but nothing happens. I double checked the cores and their Layer 3 VLAN config and its fine too. Plus I figured the issue couldn't be with them because the VLAN works fine everywhere else it exists. So the only other thing I can think of is the switch, but the VLAN exists on the switch and seems to be configured correctly. The trunks appear to be configured just fine as well too. Anyone have any ideas? I'm lost on this one.

  Read the article

• Choice of filesystem for GNU/Linux on an SD card

  - by gspr

  Hi. I have am embedded ARM-based system running on an SD card. It's currently Debian GNU/Linux using ext3 as filesystem. As I'm about to reinstall the system, I started wondering about changing to a more flash-friendly filesystem. I've heard about JFFS2, YAFFS2 and LogFS, and they all seem suited to the job. Which one would you recommend? Also, I've heard there have been a lot of ext4 improvements to better suit SSD disks; am I to interpret that as running ext4 should be just fine? What do I need to think especially about in that case? I guess the usage of the system is important. But for the sake of generality, imagine it'll do standard desktop stuff (even though it is infact a small ARM-based system). Thanks for any replies. Edit: Wikipedia tells me (in a "citation needed" statement) that Removable flash memory cards and USB flash drives have built-in controllers to perform wear leveling and error correction so use of a specific flash file system does not add any benefit. Thus, I'm leaning towards sticking with an ext filesystem.

  Read the article

• Setting XFCE terminal PS1 value and making it permanent

  - by Matt

  I'm trying to add the value PS1='\u@\h: \w\$ ' to my terminal in XFCE. I added the line to (what I think is) the correct area in /etc/profile. The relevant segment is: # Set a default shell prompt: #PS1='`hostname`:`pwd`# ' PS1='\u@\h: \w\$ ' if [ "$SHELL" = "/bin/pdksh" ]; then # PS1='! $ ' PS1='\u@\h: \w\$ ' elif [ "$SHELL" = "/bin/ksh" ]; then # PS1='! ${PWD/#$HOME/~}$ ' PS1='\u@\h: \w\$ ' elif [ "$SHELL" = "/bin/zsh" ]; then # PS1='%n@%m:%~%# ' PS1='\u@\h: \w\$ ' elif [ "$SHELL" = "/bin/ash" ]; then # PS1='$ ' PS1='\u@\h: \w\$ ' else PS1='\u@\h: \w\$ ' fi Most of that was already there, I just commented out the existing value and added the one I want. By manually opening the terminal and doing . profile, I can load these values, but they don't stick - I close the terminal and reopen, and I'm back to sh-4.1$. Maybe I'm doing this in the wrong place, but how can I make that value stick? All the info I've found on google is Fedora/Ubuntu-specific. I use Slackware. Any help on this matter would be greatly appreciated.

  Read the article

• Not able to connect to port different than 22 - OpenVPN

  - by t8h7gu

  I have OpenVPN network with 5 clients. Computer with Arch Linux which hosts OpenVPN server, It also hosts virtual machine with Computer with CentOS which is also connnected to OpenVPN subnet. Windows 8 which hosts virtual machine with CentOS. Both of them are connected to OpenVPN. Last one machine is virtual machine with CentOS which is hosted by computer with Ubuntu 14( which is not connected to OpenVPN. All machines in OpenVPN subnet are bolded. All phisical computers are in different networks. The problem is that when I use nmap to scan Windows and it's guest virtual machine it's saids that host seems down. When I force namp to scan specific port it shows filtered state: nmap -Pn -p 50010 n3 Starting Nmap 6.46 ( http://nmap.org ) at 2014-06-07 19:49 CEST Nmap scan report for n3 (10.8.0.3) Host is up (0.11s latency). rDNS record for 10.8.0.3: node3.com PORT STATE SERVICE 50010/tcp filtered unknown Telnet also cannot connect to this port telnet n3 50010 Trying 10.8.0.3... telnet: Unable to connect to remote host: No route to host But ss on this host show's proper state of this port ss -anp | grep 50010 LISTEN 0 50 10.8.0.3:50010 *:* users:(("java",12310,271)) What might be possible reason of that and how to fix it? EDIT I've found that I am able to connect via telnet to ssh port: telnet n3 22 Trying 10.8.0.3... Connected to n3. Escape character is '^]'. SSH-2.0-OpenSSH_5.3 So it seems that it's not problem with Windows firewall. But I have no idea what it might be. Also nmap result for first thousand ports: nmap -Pn -p 1-1000 n3 Starting Nmap 6.46 ( http://nmap.org ) at 2014-06-07 20:08 CEST Nmap scan report for n3 (10.8.0.3) Host is up (0.49s latency). rDNS record for 10.8.0.3: node3.com Not shown: 999 filtered ports PORT STATE SERVICE 22/tcp open ssh Nmap done: 1 IP address (1 host up) scanned in 77.87 seconds

  Read the article

• How can I fill (not replace) TAB with Spaces in MSWord?

  - by Morteza

  How can I fill (not replace) TAB with Spaces in MS Office Word? In other word, have a look at the following pic: 1 -> 222 -> 3 111 -> 2 -> 333 11 -> 22 -> 33 11 -> 2222 -> 3333 Suppose that - is indicated one TAB. As you see, each column is justified from left. I need to fill each TAB with Spaces, so that the justification not be confused. If I use 'Find & Replace' option to change each TABs to a specific number of Spaces, justification will be confused because each column have its own character number. In other word, if I change each TAB with 6 Spaces, the above will be changed to the follow: 1 222 3 111 2 333 11 22 33 11 2222 3333 My need is as follow (each dot indicate a Space): 1......222......3 111....2........333 11.....22.......33 11.....2222.....3333

  Read the article

• Can a Windows Domain play along with a Hosted Exchange service?

  - by benzado

  I'm setting up a computer network for a small (10-20 people) company. They are currently using a Hosted Exchange service they are totally happy with. Other than that, they are starting from scratch (office doesn't even have furniture yet). They will need some kind of file sharing server set up in their office. If I set up a machine as a file server and nothing more, users will have three passwords to deal with: local machine, file server, and email. If I set up a Domain Controller, identities for local machine and file server will be the same. But what about the Hosted Exchange server? Must the users have a separate email password, or is it possible to combine the two? (I realize it might depend on the specific hosting provider, but is it possible?) If not, it seems like I have these options: Deal with it: users have a separate email password. Host Exchange on the local server: more than they want to manage in-house? Purchase a hosted VPS, make it part of the domain, and host Exchange there. (Or can/should a VPS be a domain controller?) I realize I have a lot of questions in there. The main one: is there any reason to use a Hosted Exchange service if I'm setting up other Windows services?

  Read the article

• Subversion 1.7.x and expat location in configure

  - by ditto

  I am running CentOS 6.3 64bit and DirectAdmin control panel. Currently I have installed Apache Subversion 1.6.19 without any problems. I have installed expat and expat-devel and neon-devel using yum. When installing Apache Subversion 1.6.19 this configure command works fine: ./configure --prefix=/usr --with-ssl --with-apxs=/usr/sbin/apxs --with-apr=/usr/bin/apr-config However when installing Apache Subversion 1.7.7 using the same configure command as above, I get this error after doing commmand "make": /etc/httpd/lib/libaprutil-1.so: undefined reference to `XML_StopParser' collect2: ld returned 1 exit status make: *** [subversion/svnadmin/svnadmin] Error 1 However I found out I can solve that problem by adding this into the configure command: --with-expat=includes:lib_search_dirs:libs So it then looks like this: ./configure --prefix=/usr --with-ssl --with-expat=includes:lib_search_dirs:libs --with-apxs=/usr/sbin/apxs --with-apr=/usr/bin/apr-config However that configure command then give this warning: configure: WARNING: Expat found amongst libraries used by APR-Util, but Subversion libraries might be needlessly linked against additional unused libraries. It can be avoided by specifying exact location of Expat in argument of --with-expat option. So I want to solve that. I have experimentet alot, but not been able to figure out how to "specifying exact location of Expat" in configure command, and how to find out what the location should be? However after a lot of searching I found this: http://subversion.tigris.org/issues/show_bug.cgi?id=3997 - that is a FreeBSD user saying this: Building Subversion 1.7.x on FreeBSD currently requires a configure flag: --with-expat=/usr/local/include:/usr/local/lib:expat As that is the default location of expat on that platform, it would be nice if configure detected it automatically. However I am not using FreeBSD, I am running CentOS 6.3 64bit. Also remember I said I have installed expat and expat-devel and neon-devel using yum. However I tried to use the expat/command path posted by the FreeBSD user, and it seems to work, it does not give errors when running configure command, and does not give errors when running "make". This is what I used then: ./configure --prefix=/usr --with-ssl --with-expat=/usr/local/include:/usr/local/lib:expat --with-apxs=/usr/sbin/apxs --with-apr=/usr/bin/apr-config But this server is a production server, and therfor I need your help to advice if this is also correct to run on a CentOS server? Is the following path in expat command correct on CentOS?: --with-expat=/usr/local/include:/usr/local/lib:expat If not, please advice what it should be changed to. Thanks in advance for any confirmation or help on this!

  Read the article

< Previous Page | 770 771 772 773 774 775 776 777 778 779 780 781  | Next Page >