Search Results

Search found 25811 results on 1033 pages for 'visual studio 2008'.

Page 779/1033 | < Previous Page | 775 776 777 778 779 780 781 782 783 784 785 786  | Next Page >

• Hard Disk based storage library

  - by Ryan M.

  We have a Tandberg T24 tape device to handle all of our long term backups right now. We decided that we're not backing up nearly everything that we would like to and that we still have a lot of vulnerabilities. To get to where we want to be, we're going to have to back up a lot more servers than we're currently doing. All of our internal servers have some sort of directly attached drive (I.e. LaCie Raid box or a simple portable hard drive) doing backups, but what we want to do is get those backups off-site. The current tape drive is directly attached via SCSI to a Windows Server 2008 File Server. So to back up anything to tape, it has to be funneled through the File Server. With the current increase that we have planned, I don't think that funneling everything through the File Server is the right course of action and I'm thinking that maybe a second backup device would be more appropriate. I would like your input on a couple of ideas. 1) Doing HDD instead of tape. Tape is hard to deal with. We have a regular rotation cycle, so they don't need years and years of shelf life, so I'm wondering if something HDD-based would be better. 2) Something accessible over the network. Instead of having the device directly attached to one specific machine, have it available to all the servers over the network. Our File Server is a 12-disk raid 6 set up.. I was thinking something like that, but with no raid involved, all disks are stand alone so they can be used/installed/removed on an individual basis. Does any such thing exist? Thanks for your ideas. I'm really interested to hear about some of the solutions you guys are using..

  Read the article

• How do I connect remotely to SQL Server from Windows client?

  - by humble_coder

  Hi All, Having a bit of an issue connecting to SQL SERVER remotely from Windows. I've verified that all of my settings are correct via SQL SERVER MANAGEMENT STUDIO EXPRESS and SQL SERVER CONFIGURATION MANAGER. I can connect remotely using ODBC drivers from other OSes (e.g. OS X, Linux, etc). However, when I connect with the same credentials from a remote Windows machine using "SQL SERVER" as the driver I am told that the system cannot connect. I've tried creating an ODBC Data Source and I get the same error: Connection failed: SQLState: '01000' SQL Server Error: 14 [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen(InvalidInstance()). Connection failed: SQLState: '08001' SQL Server Error: 14 [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Invalid Connection From the non-windows machines I can use the IP address of the SQL Server just fine. However, on the remote Windows machine, neither IP address nor named instance works. FYI, I can create an ODBC Data Source using the named instance on the machine actually running the SQL Server (but this is, of course, nothing special -- just proof that it isn't completely hosed). One interesting note: If I use SQL STUDIO 2005 from a Windows client machine, I can use the IP address to connect remotely. Still, the whole reason I bring this up is because I need to use a software package I've written to connect to SQL Server remotely from Windows machines as well. Previously the solution was only needed to xfer data from SQL Server into a PostGRES or MySQL database on non-Windows machines (due to DBA preference). However, now they also want to move the data from the legacy software to MySQL even on Windows. Any assistance would be most appreciated. Feel free to provide a full example connection string. Best

  Read the article

• Advice on resizing 1280*720 for web audiences.

  - by jamiethompson90

  Forgive my spelling, I'm posting this from my mobile. I've recently decided to record videos to help teach a visual language. My camera likes to boast it can record in 1280; its a cheap camera about £75 so the quality isn't amazing. But its okay. Anyways, it has some other settings for lower res, but I figure might as well record in a larger size in case the need arises for a bigger source file in the future. I've been looking at jw player to play the converted files (mp4 to flv I think). What do you think a good size would be to convert to? I want to to look nice and clear remembering it is a visual language so lip patterns, facial expressions, body movement, fingers etc are all important, sound is not that important but I would like to have a choice to toggle captions. Thanks for any help, any advice apreciated, first time I have done a video project! P.s. If anyones interested its BSL. Jamie

  Read the article

• Is the Windows VPN secure?

  - by Tor Haugen

  I have used a few VPN solutions over the years. Most are hard to set up, slow to connect and/or rather ill-behaved (replacing system drivers, disrupting each other etc). One solution I have never used earlier is the one built into Windows. This is mostly because the infrastructure guys always refuse to use it because they claim it's 'not secure'. Now I have finally had the chance to use it (on Windows 7), and wow, it's a breeze! Easy to set up, well-behaved, it connects almost instantly, automatically authenticates with my logged-in credentials, and integrates excellently with the UI. I have to say, unless it really isn't secure, I'll be happy if I never have to use another VPN product ever again. I gather the Windows VPN used to rely on PPTP, which is not considered secure. But in Windows 7/2008, it supports L2TP/IPSec, SSTP and IKEv2, and authenticates with EAP or CHAP/CHAPv2. That seems pretty up-to-date to me. But I'm just a lowly developer. Can someone in the know give me the lowdown on this?

  Read the article

• System x3550 M2 stuck on system initializing after firmware upgrades

  - by itmanager223

  Hey guys so i have been having this major issue for the last few hours now. I have a system x 3550M2 server and i ran the UEFI and IMM firmware upgrades within windows server 2008 R2 x64. All upgrades went fine and i was told to reboot. I performed the reboot cleanly using the OS restart option. Upon restarting it showed the system initializing screen and it stayed there for a good hour. After that hour i figured it froze and so i powered down and power up again. Now i can not boot back up to even see the IBM splash screen or the OS... I have tried switching the Jumpers to go to the backup UEFI and backup IMM and no luck. I have also reset the CMOS power and i have pressed the reset button 3 times on the light path and no luck. There are no lights light on the light path to indicate anything is broken. The only thing i see on the light path is the number 0.5. Any ideas guys i am quite stumped with this problem. Thanks a lot, Dani Cela

  Read the article

• Copied a file with winscp; only winscp can see it

  - by nilbus

  I recently copied a 25.5GB file from another machine using WinSCP. I copied it to C:\beth.tar.gz, and WinSCP can still see the file. However no other app (including Explorer) can see the file. What might cause this, and how can I fix it? The details that might or might not matter WinSCP shows the size of the file (C:\beth.tar.gz) correctly as 27,460,124,080 bytes, which matches the filesize on the remote host Neither explorer, cmd (command line prompt w/ dir C:\), the 7Zip archive program, nor any other File Open dialog can see the beth.tar.gz file under C:\ I have configured Explorer to show hidden files I can move the file to other directories using WinSCP If I try to move the file to Users/, UAC prompts me for administrative rights, which I grant, and I get this error: Could not find this item The item is no longer located in C:\ When I try to transfer the file back to the remote host in a new directory, the transfer starts successfully and transfers data The transfer had about 30 minutes remaining when I left it for the night The morning after the file transfer, I was greeted with a message saying that the connection to the server had been lost. I don't think this is relevant, since I did not tell it to disconnect after the file was done transferring, and it likely disconnected after the file transfer finished. I'm using an old version of WinSCP - v4.1.8 from 2008 I can view the file properties in WinSCP: Type of file: 7zip (.gz) Location: C:\ Attributes: none (Ready-only, Hidden, Archive, or Ready for indexing) Security: SYSTEM, my user, and Administrators group have full permissions - everything other than "special permissions" is checked under Allow for all 3 users/groups (my user, Administrators, SYSTEM) What's going on?!

  Read the article

• SQL Server Replication Backup

  - by user18039

  Hi We have a new system that runs on SQL Server 2008 r2 64-bit. There is a primary on-line transactional processing (OLTP) database that accepts a high volume of updates from several thousand Point of Sale systems at stores around the country. In order to protect this vital function, I have decided to introduce a dedicated reporting database server - from which multiple users will run some pretty complex reports. I realise that there were a number of choices but I decided to use Transaction Replication as the mechanism for copying the data from the OLTP database to the new reporting database - one way replication. The solution has worked well in test. I'm now being asked what changes need to be made to the backup policy to cover the architectural changes. I have read pages such as MSDN:Strategies for Backing Up and Restoring Snapshot and Transactional Replication but I think these are overkill for my solution. In fact, my current thinking is that we simply need to continue making backups of the OLTP data and logs. If the Reporting db or any of the system replication (eg distribution) databases fail then it's no big deal - we can clear all down then re-create the replication. I realise that taking a complete snapshot of the OLTP would be time consuming (approx 5 hours) but I'd be more relaxed about this that trying to restore backups of the various data and log files in the correct sequence. My view is that the complex strategies set out in the MSDN article would only be the way to go for a more complex replication solution than I have, eg if there were multiple subscribers with 2-way replication. Would you agree? I'd be grateful for any advice. Many thanks, Rob.,

  Read the article

• Connecting to a subdomain severs the connection to the domain itself. What's going on?

  - by TheAgent

  Hi all. We have a website on a third-party server (server leased and shared with other websites) and the server provides access to our SQL Server database through a subdomain in the form of mssql.DomainName.com. I was told to use SQL Management Studio Express to connect to this subdomain in order to manage the database. After a few tries and getting many "Timeout" messages, I finally manage to connect to the server; everything's fine. But now I can't connect to DomainName.com anymore. Trying to browse DomainName.com using Firefox, it tries to "lookup" DomainName.com address and fails, telling me "the server was not found". I have to disconnect Management Studio from the server and wait a couple of hour for DomainName.com to become available again, and after that, trying to reconnect to the SQL Server again repeats the scenario. While I can't browse DomainName.com directly, I can use a proxy to connect to it, meaning that the problem is somehow related to a DNS my computer tries to ask to translate the name to the corresponding IP. Anyone seen anything like this before? Any ideas? Thanks in advance.

  Read the article

• How can I rapidly switch hosts?

  - by EAMann

  I'm in the process of migrating a forum setup from one version of the software on one machine (older shared Windows host) to a new VPS (Windows Server 2008). To install the software, I used my hosts file to temporarily point the domain at the new IP address. To see the old site, I obviously re-edit the hosts file to remove the reference. But this leaves me constantly adding/removing a # from my hosts file just so I can switch back and forth between the two servers. Is there a way to do this more rapidly? I've found a handful of toggling batch scripts, but all they do is automate the addition/removal of the # character ... so there's still a noticeable lag where I have to repeatedly hit F5 to force my system to detect the new settings. Ideally, I could view both servers at the same time on the same machine. Maybe one through a regular browser session and one through some kind of a proxy. Unfortunately, I don't have the first idea how to set that up. Ideas?

  Read the article

• Win 7 Remote Desktop connection failure when already logged in.

  - by Andy E

  I have a bit of a strange problem, magnified recently by my broadband dropouts. I wasn't sure whether to post this on SU or SF, so I thought I'd start here as more users would be likely to know what the problem is. In short, when I try and connect to my server (Windows Server 2008) from my laptop running Windows 7, I can only connect if my remote account was previously logged out. If I'm still logged in I get the error message: Windows cannot connect to the remote server. No explanation or anything. If my IP address is the same, I don't have this problem. If I boot up Windows XP Mode and run XP's remote desktop connection it works just fine -- I think the difference there is it takes me to the remote server's logon screen. With Win 7 RDC you never see the logon screen, it asks you for credentials before entering full screen mode. The real problem is that I'm having random broadband dropouts and my IP isn't static. If I logon via Win XP RDC, log out and then run Win 7 RDC then it works fine. I realize I can just use Win XP's RDC for now, but I don't really like keeping XP Mode open if I can help it. Does anyone know a way around this problem? Maybe forcing Win 7 RDC to go to the logon screen, or changing some server-side settings to work around the IP address issue?

  Read the article

• Hyper-V and attaching physical disks [migrated]

  - by Mike Christiansen

  So, I'm looking at rebuilding my home server. My current setup is the following Windows 7 Ultimate 1TB Boot Drive (my smallest drive) Windows Dynamic Spanned volume, continaing 1x 1TB drive, 2x 2TB drives, totalling 5TB. I am upgrading to a hardware RAID controller, and I would like to run Hyper-V server core. However, I want to retain the ability to join my "file server" to a homegroup, so I must use Windows 7. I know VHDs can only be like 127GB or something, so I obviously need to directly connect disks to my Windows 7 machine. Here is my plan: Server Core 2008 R2 (Hyper-V) 1TB Boot Drive (storing VHDs for boot drives of VMs) - possibly in a RAID 1 with my other 1TB drive 5x 2TB drives (1x 2TB drive hot spare), totalling 10TB, directly attached to a Windows 7 VM, for use of homegroup for this array. In the past, I directly attached the windows dynamic volume to a Windows 7 VM, and performance was abysmal. The question is, with hardware RAID, will it really make that much of a difference? Server specs: Intel Core 2 Quad Q9550 2.83GHz Asus Maximus II Formula (PCI-E x16) 8GB DDR2 RAM PC2-6400 (Yes, I know its a bit out of date)

  Read the article

• What is the name of the this DOS font? Where and how to add it? Why is there a 1 pixel gap?

  - by JBeurer

  So basically I somehow stepped into this webpage: www.braindamage.vg And the first thing that hit me hard was the lovely DOS fonts, so naturally I wanted to get them into my IDE badly. Opened the html source file and CSS file to find the font name: @font-face { font-family: 'Perfect DOS VGA 437'; src: url('http://www.braindamage.vg/wp-content/themes/braindamage/dosfont.eot'); } @font-face { font-family: 'Perfect DOS VGA 437'; src: url('http://www.braindamage.vg/wp-content/themes/braindamage/dosfont.svg#dos') format("svg"), url('http://www.braindamage.vg/wp-content/themes/braindamage/dosfont.ttf') format ('truetype'); } So I download the font, add it using Control Panel - Fonts. But once I start using it (notepad, MSVS 2008 & MSVS2010) I notice that it looks slightly off: It seems like there's 1 extra pixel between each character. How it should look: What is causing it and how to fix this? Is it the windows XP? (i have disabled font smoothing) Or is there something wrong with the font file?

  Read the article

• Low-profile, PCI Express, x1 video card with VGA-out?

  - by Dandy

  I just bought an Acer Aspire EasyStore H340 system (http://us.acer.com/acer/productv.do?LanguageISOCtxParam=en&kcond61e.c2att101=54825&sp=page16e&ctx2.c2att1=25&link=ln438e&CountryISOCtxParam=US&ctx1g.c2att92=450&ctx1.att21k=1&CRC=936243954) It comes with Windows Home Server, which I don't particularly care for (too dumbed down for my liking)--I bought the box mainly for the form factor, and intend to install Server 2008 on it and have it run as a small domain controller. The geniuses at Acer however went out of their way to ensure you can only run Home Server--you can only connect to it via the Home Server Connector software, as it has no video-out whatsoever (so essentially, there's no way to even get into the BIOS). It only has a low-profile, PCI Express x1 slot. It turns out to be way harder than I thought to locate a video card that both has an x1 connector, and is low-profile (I'd really rather not snip the bracket at the back just so it'll fit the case). I know they're out there, and I've seen one with Display Port outputs, but I don't have a monitor with this connection. So to reiterate, it needs to be: - x1 connector - low profile - VGA out (though DVI would be okay; I have some spare adapters) Can anyone recommend anything at all?

  Read the article

• visually documenting web server configuration and infrastructure

  - by Alex Ciarlillo

  I have just finished a large re-organization and update of our institutions web server(s). This server hosts 3 virtual hosts, 3-4 blogs, 2 wikis, some legacy static HTML pages, and many hosted documents (PDF, .jpg, .xls). I have organized the site into a structure of something like: /var/www/sites/vhost1, vhost2, vhost3 .../wordpress/blogX .../mediawiki/wikiX Data is in a seperate directory structure so I can run a cron task over it to make sure it is all writeable and such. I then symlink to these data directories for each application. /var/www/data/vhost1, vhost2, vhost3 .../wordpress/blogX/uploads .../mediawiki/wikiX/images All Apache configs are in /etc/httpd/conf.d/vhosts.d/vhost1,2,3.conf On top of this there is also a testing server which mirrors this setup. Once changes are fully tested, they are rsynced down to the live server. All the wordpress installs and mediawiki installs are straight form SVN and updates are done by switching branches or "svn up". So my question is how can I best document to share with a) co-workers, b) possible future replacement, c) myself 6 months from now. Obviously I can make a wiki page, excel document, whatever and fill it with text, but I am looking for a more visual representation that I can use to explain the architecture to less-technical people. Ideally it would be awesome if this visual representation could then be expanded to get more technical details.

  Read the article

• Problem running MVC3 app in IIS 7

  - by mjmoore99

  I am having a problem getting a MVC 3 project running in IIS7 on a computer running Windows 7 Home-64 bit. Here is what I did. Installed IIS 7. Accessed the server and got the IIS welcome page. Created a directory named d:\MySite and copied the MVC application to it. (The MVC app is just the standard app that is created when you create a new MVC3 project in visual studio. It just displays a home page and an account logon page. It runs fine inside the Visual Studio development server and I also copied it out to my hosting site and it works fine there) Started IIS management console. Stopped the default site. Added a new site named "MySite" with a physical directory of "d:\Mysite" Changed the application pool named MySite to use .Net Framework 4.0, Integrated pipeline When I access the site in the browser I get a list of the files in the d:\MySite directory. It is as if IIS is not recognizing the contents of d:\MySite as an MVC application. What do I need to do to resolve this?

  Read the article

• Hyper-V vss-writer not making current copies [migrated]

  - by Martinnj

  I'm using diskshadow to backup live Hyper-V machines on a Windows 2008 server. The backup consists of 3 scripts, the first will create the shadow copies and expose them, the second uses robocopy to copy them to a remote location and the third unexposes the shadow copies again. The first script – the one that runs correctly but fails to do what it's supposed to: # DiskShadow script file to backup VM from a Hyper-V host # First, delete any shadow copies of the drives. System Drives needs to be included. Delete Shadows volume C: Delete Shadows volume D: Delete Shadows volume E: #Ensure that shadow copies will persist after DiskShadow has run set context persistent # make sure the path already exists set verbose on begin backup add volume D: alias VirtualDisk add volume C: alias SystemDrive # verify the "Microsoft Hyper-V VSS Writer" writer will be included in the snapshot # NOTE: The writer GUID is exclusive for this install/machine, must be changed on other machines! writer verify {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de} create end backup # Backup is exposed as drive X: make sure your drive letter X is not in use Expose %VirtualDisk% X: Exit The next is just a robocopy and then an unexpose. Now, when I run the above script, I get no errors from it, except that the "BITS" writer has been excluded because none of its components are included. That's okay because I really only need the Hyper-V writer. Also I double checked the GUID for the writer, it's correct. During the time when the Hyper-V writer becomes active, 2 things will happen on the guest machines: The Debian/Linux machine will go to a saved state and restore when done, all fine. The Windows guests will "creating vss snapshop-sets" or something similar. Then X: gets exposed and I can copy the .vhd files over. The problem is, for some reason, the VHD files I get over seems to be old copies, they miss files, users and updates that are on the actual machines. I also tried putting the machines in a saved sate manually, didn't change the outcome. I hope someone here has an idea of how to solve this.

  Read the article

• Snort not detecting outgoing traffic

  - by Reacen

  I'm using Snort 2.9 on windows server 2008 R2 x64, with a very simple configuration that goes like this: # Entire content of Snort.conf: alert tcp any any -> any any (sid:5000000; content:"_secret_"; msg:"TRIGGERED";) # command line: snort.exe -c etc/Snort.conf -l etc/log -A console Using my browser, I send the string "_secret_" in the url to my server (where Snort is located). Example: http://myserver.com/index.php?_secret_ Snort receives it and throws an alert, it works, no problem ! But when I try something like this : <?php // (index.php) header('XTest: _secret_'); // header echo '_secret_'; // data ?> If I just request http://myserver.com/index.php, it does not work or detect anything from the outgoing traffic even though the php file is sending the same string both in headers and in data, with no compression/encoding or whatsoever. (I checked using Wireshark) This looks to me like a Snort problem. No matter what I do it only detects receiving packets. Did anyone ever face this sort of problems with Snort ? Any idea how to fix it ?

  Read the article

• Server format & Reinstall while keeping Server & domain ID

  - by Chris

  Hi Everyone, I want to reinstall my 2008 R2 server from scratch, due to multiple Active Dir issues. I have only 1 server running AD and a spare machine to use if necessary. Is there a way to save just the user accounts and the domain SID, so that I can start with a clean server that uses the same name as before? I can reassign file security, but I do not want to have to rejoin all the users to a new domain. Also all users are mapped to folders on the server. What I hope to do is a clean install of the server without having to mess with the users machines. can someone please tell me the procedure to accomplish this? any help appreciated! Thanks guys, but I could be here all day telling you every error I am getting. can we please keep this to the question of how to do a reinstall and keep the same SID? I just want to start over without having to rejoin all the clients to a new domain. Is there such a tool that can backup the Server SID and the AD domain name so that I could restore them, without restoring any other data? I might not be using the correct terminology here, but hopefully you understand what I am asking. Thanks

  Read the article

• Confused with creating an ODBC connection, apparently I have two separate odbcad32.exe files?

  - by Hoser

  Alright, this is my first time working with this so forgive me if I'm a little confusing or vague. I have a server with Windows Server 2008 Standard without Hyper-v (6.0, Build 6002). I'm running a small website off this server and using a Microsoft Access database to store some information coming in through the website. I'm sure the PHP I have written to open the ODBC connection is correct as it has worked for me when I created this website in a testing environment on a laptop. My current issue now is that it seems like I have two different odbcad32.exe's, and one doesn't appear to have a driver for a .accdb file, and only a .mdb file. The other has a driver for both. The first one I speak of has a driver titled 'Driver do Microsoft Access (.mdb)', the second one has a driver titled 'Microsoft Access Driver (.mdb, .accdb)'. I access the first odbcad32.exe by going to C:\Windows\SysWOW64\odbcad32.exe, and then the one that seems to have the driver I need I go to Control Panel-Administrative Tools-Data Sources(ODBC) and simply create a new connection in the System DNS tab. Whenever I make changes to the one that I access through the Control Panel, I see no changes, however if I use the odbcad32.exe file in SysWOW64 I do get some changes in the errors that come back to me. The main difference I noticed is that when I set up an ODBC connection with the Control Panel method it said it simply couldn't find the ODBC connection, but when I made a .mdb connection in the SysWOW64 one (and pointed it to a .accdb file) it says Cannot open database '(unknown)'. It may not be a database that your application recognizes, or the file may be corrupt. Which makes it seem like it is this odbcad32.exe version in SySWOW64 that is being recognized as the 'correct' one. Is there any way to fix this? I've tried to be as thorough as possible but if I've been confusing or left anything out let me know.

  Read the article

• php-cgi.exe Taking out server, multiple running

  - by Alex

  I have been using ZendServer CE for over a year and have never had a problem. Recently, about a week or two ago I have found my server to be acting up and even causing RDP to be un-connectable. After some looking around I have 20, 25, 30+ php-cgi.exe running. With my IIS7 service starting with Windows once my server started all these php-cgi.exe would start running (even though the limit is 10) and I could not even connect to it. After disabling the Web Server as startup which stops php-cgi.exe from running the server runs flawless, like it always has. As soon as I run the web server all these odd issues start. I have a post over at Zend http://forums.zend.com/viewtopic.php?f=44&t=41043&p=95133 where I was told to update my Zend install. After doing so this issue has not gone away. Even running 1 php-cgi.exe (somehow 2 start anyway) the server begins to go silly. The first issue I find myself with running php-cgi.exe is that Windows Services, weather be stock or using FireDaemon begin to lag, slow start, crash, etc. If anyone can help me with this I would GREATLY appreciate it. At this time I am forced to look for a alternative to running PHP other than cgi as it simply takes out the whole box. On another note, I run this same version of Zend on a similar server with no issues. Starting to think its a IIS issue. (UPDATE) Installed newest version of PHP, separate from Zend, same issue. Server Specs: Intel Xeon Quad w HT Nehlam Based 24GB DDR3 1333 2x1TB Raid Mirror OS 2x1TB Raid Mirror (Other) 4x2TB Raid 5 (Storage) Server 2008 R2

  Read the article

• Hyper-V snapshots – unable to start VM

  - by ahmedz

  I restarted my Host server after shutting down three guest VMs. After I restarted the machine I tried to start the VMs and got an error stating the the VM failed to start. SERVERNAME failed to start. Attachment 'avhd file path' is read only. Please provide read/write access to the attachment. Error: 'General access denied error' SERVENAME failed to start. (virtual machine ID 17292200-wd22-dd22-d23-dddddd2222) The issue seems to be with the disk space. The VHD file for this VM is 128 GB and there are two AVHD files of 58 and 75 GB. Whereas the total disk space on this drive (E) is 280 GB - the free space is only around 23 GB. I understand that the error is caused by the unavailability of the required disk space. Unfortunately, I cannot increase the disk space on this drive. However I have another drive (D) that has 400 GB of free space. I exported this VM to D drive and then tried to add the copied AVHD files but it gives me a similar error. I am running Windows Server 2008 R2 Datacenter. Any help is appreciated.

  Read the article

• Permanent solution to Win XP SP3 window animation removal

  - by epale85

  Hello everyone, May I know how I can get rid of the Window Animation (seen when you minimise or maximise a window) in Windows XP Service Pack 3 Permanently?? I have tried the following two solutions: I went to the control panel---adjust visual effects--- then unchecked the "Animate windows when maximising and minimising" option. 2.I have tried using windows powertoys tweakUI to disable the animation. 3.I even tried this: Turn Off Window Animation You can shut off the animation displayed when you minimize and maximize Windows. 1. Open RegEdit 2. Go to HKEY_CURRENT_USER\Control panel \Desktop\ WindowMetrics 3. Create a new string value "MinAnimate". 4. Set the value data of 0 for Off or 1 for On But still no help The Big Problem is that the window animation will disappear for a while but returns again some time later. When I navigate back to the "adjust visual effects" window, the checkbox for "Animate windows when maximising and minimising" is checked again. Thank you very much

  Read the article

• Expanding iSCSI LUNs (NTFS)

  - by Fatih

  I have a 4TB iSCSI LUN that formated as NTFS in Windows 2008. I've shared this formated volume as a folder over SMB. When the capacity of this volume is not enough, I have to add more iSCSI LUNs, but the end-users must see only the folder that I've shared before. So, when I expand the NTFS volume that is currently 4TB, with more iSCSI LUNS(for example 2 more 4TB LUN), if one of the luns is failed, or missing, will all of my data in the folder be lost? I imagine that the expanding ntfs volume is like RAID 0(striped). if it is like RAID 0, then all my data will be lost when one of the luns is failed, or missing. In brief, there are two questions in here: 1- What will be happened, if one of the luns is missing in an expanded ntfs volume? 2- Is there another way to merge all of iscsi luns as only a folder, in that way the users don't see any extra folder even if I add extra iscsi luns to the file server.(I don't mention about DFS) Regards.

  Read the article

• One workstation gets slow access to the server, but others are fast

  - by Mike Hanson

  I've just setup a machine with Windows Server 2008. It hosts various services, like IIS, POP3, SMTP, Music for Squeezeboxes, VNC. All was working well for the first week or so. One day I needed to create a mapped drive on the server, so it could access files on my workstation. Windows indicated that Network Discovery was needed, so I turned it on with the "Home / Office" option (rather than "Public"). This may be coincidence, but since that time I've been having troubles accessing various services from my main workstation (running Windows 7/64): POP3 continued working correctly, but SMTP was delayed or failed entirely. (Telnet took 20 seconds to connect, but Outlook would never send messages.) VNC failed entirely. I reinstalled it on the server, and now it works but feels sluggish. The music web server was extremely delayed and usually failed. I tried reinstalling, and now it takes about 30 seconds to show the page name on the browser tab, and another 30 seconds to display any page contents. Other machines on the local network seem fine, as do machines connected via the Internet. I don't believe I changed anything on my own machine that would cause this. I considered the possibility that my anti-virus was involved, so I uninstalled AVG (commercial version), but that didn't help. I installed Norton 360 after that, and it didn't complain of viruses on my machine, and the delays remained. Because only my machine is affect, I'm tempted to blame it, except that reinstalling software on the server improved the situation, so there is almost certainly something going on with the server too. The firewall has all the necessary ports open, and it works fine for the other workstations (including external machines connected via the Internet), which indicates that it should be OK. Any ideas?

  Read the article

• Why is "start in" needed for Windows scheduled tasks?

  - by GomoX

  We develop a web application that can be deployed on Windows or Linux. The Linux implementation uses cron, and the Windows one uses scheduled tasks to run a single PHP script that processes all scheduled tasks for our system. The task is scheduled using schtasks during the install process, like: This has always worked both under W2003 and W2008. A week ago a customer reported that scheduled tasks were not running. He is running on Windows 2008. We checked over and over and finally solved the issue by entering the folder that contains the .vbs script as the "start in" folder for the scheduled task. This said, there is no way to set up the "start in..." value from schtasks without using an XML definition of the tasks. XML definitions don't work in Windows 2003, so I would have to add windows version detection to the installer, additional testing, etc (I'd like to avoid this if at all possible). The only atypical thing I noticed about the install is that the system is installed in D:\ as opposed to the default C:\Program Files (x86)\, but I don't see how this would matter. All the paths are absolute in all the scripts. Can anyone suggest a reasonable solution for this?

  Read the article

< Previous Page | 775 776 777 778 779 780 781 782 783 784 785 786  | Next Page >