Search Results

Search found 24207 results on 969 pages for 'anonymous users'.

Page 781/969 | < Previous Page | 777 778 779 780 781 782 783 784 785 786 787 788  | Next Page >

  • MS NPS denying access, can't validate server certificate

    - by Fred Weston
    At my office we use a Cisco WLC2504 wireless controller and starting about a week ago we started having problems with users connecting to one of our secure wireless network. We are running AD on Windows Server 2008 R2 and use network policy server to control access to our wireless network. When I look at the logs in event viewer after a failed connection attempt I see an access reject message: Reason Code: 262 Reason: The supplied message is incomplete. The signature was not verified. Looking this up on Google I found this article: http://support.microsoft.com/kb/838502 I tried disabling server certificate validation on my computer and as soon as I did that I was able to connect to the network, so it seems that there is some sort of certificate validation issue. I'm not sure which certificate is unable to be validated or how to fix it. This used to work and stopped suddenly by itself so I am thinking a certificate may have expired. When I go to NPS Policies Network Policies My policy Constraints Auth methods Microsoft PEAP and view the properties, the certificae specified here expires in 2016, so doesn't seem as though this could be the problem. Any suggestions on how to troubleshoot this issue?

    Read the article

  • IIS7Register failed with HRESULT 800700b7: 'Cannot create a file when that file already exists.'

    - by Optimax
    I am trying to re-install ASP.NET on IIS7 running in Win7/64, which magically stopped working all of as sudden. When I run aspnet_regiis -i, I get an error message that says Finished installing ASP.NET (4.0.30319). Setup has detected some errors during the operation. For details, please read the setup log file C:\Users\username\AppData\Local\Temp\ASPNETSetup_00031.log Looking at the log, it reports Failure Changing IIS ApplicationHost.config: IIS7Register failed with HRESULT 800700b7: 'Cannot create a file when that file already exists. ' The real problem surfaces when trying to access an ASP.NET web page from that server: HTTP Error 500.21 - Internal Server Error Handler "PageHandlerFactory-Integrated" has a bad module "ManagedPipelineHandler" in its module list and Most likely causes: Managed handler is used; however, ASP.NET is not installed or is not installed completely. There is a typographical error in the configuration for the handler module list. So it seems ASP.NET has NOT been properly re-installed. Now, I am aware of the alleged one-and-only remedy for this, repeated all over the Web, and referenced for example here: http://blogs.msdn.com/b/dougste/archive/2010/09/06/errors-installing-asp-net-4-0.aspx Except that the proposed solution does not work for me. I have expanded the %windir% macros within isapiCgiRestriction section for .NET 4.0 - and aspnet_regiis still fails for me. Any other ideas?

    Read the article

  • Word 2010 Crashing

    - by Flymo
    We have an office with all users using the same spec'ed PCs with the same Image deployed to them, so that the software and configuration is identical. I have one user whos keeps having the install of MS Word 2010 crash intermittently. First i reinstalled Office 2010 Suite, but will have the crashes. The PC has been replaced with a clean install of Windows and Office but we are still having the issues with Word crashing. We have had the user to log onto another PC which we know to be working fine, but again, Word keeps crashing. Below is the Error from EventViewer: Faulting application name: WINWORD.EXE, version: 14.0.6024.1000, time stamp: 0x4d83e310 Faulting module name: MSVCR90.dll, version: 9.0.30729.6161, time stamp: 0x4dace5b9 Exception code: 0xc0000417 Fault offset: 0x000320f0 Faulting process id: 0xc34 Faulting application start time: 0x01cd1881ea917c33 Faulting application path: C:\Program Files\Microsoft Office\Office14\WINWORD.EXE Faulting module path: C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_50934f2ebcb7eb57\MSVCR90.dll Report Id: edd97602-8477-11e1-aa13-001111db42bf The PC is running Windows 7 Professional and Office 2010 We have tried everything we can think of. If anyone could enlighten us, it would be very much appretiated. Cheers

    Read the article

  • Windows web server and SQL Server on same dedicated server

    - by asinc
    I'm currently trying to decide on the best approach to handle hosting a few moderate traffic websites for production e-commerce and online applications. We'd like to move to a dedicated server and are looking at this as the most likely machine: Quad Core Intel Core2Quad Q9550 Processor, 2.83 Ghz X 4, 4 GB Kingston Ram This would run Windows Web Server 2008 R2 x64 and potentially also Sql Server Web 2008 and SmarterMail server. Given that we already pay for a high-end VPS for development, testing, shared version control we'd like to avoid going with two servers for production. We'd like to avoid using shared sql server hosting and have thought of using the development server as the database server as an option too - but potentially a security risk due to use for development by internal and contract users. The questions are: - Do you feel there would be performance degradation by running this on the same machine? - Are there significant issues to be concerned about if we do this? We understand that best practice would be to run separate db and app servers but the volume of traffic is currently not that high and adding another server just for database is currently too costly. - What are others doing out there? Alternatively, would you recommend instead going with two separate VPS servers with 2GB RAM each on Hyper-v which would be about the same cost as the single dedicated server above? Thanks!

    Read the article

  • How to solve "Warning: mail() [function.mail]: SMTP server response: 530 Relaying not allowed - sender domain not local in D:\\... " Error?

    - by Kiran Rs
    I have a contact page where users can contact me via that form. But I'm getting this error, Warning: mail() [function.mail]: SMTP server response: 530 Relaying not allowed - sender domain not local in D:\INETPUB\VHOSTS\nextoption.in\httpdocs\auto-replay\contact.php on line 33 My Php code is, if(isset($_POST['send'])) //if "email" is filled out, send email { //send email $email1=$_POST['email']; $headers = "From: My site\r\n"; $headers .= "Reply-To: [email protected]\r\n"; $headers .= "Return-Path: [email protected]\r\n"; $headers .= "X-Mailer: Drupal\n"; $headers .= 'MIME-Version: 1.0' . "\n"; $headers .= 'Content-type: text/html; charset=iso-8859-1' . "\r\n"; $to = "[email protected]"; $subject = "Test mail"; $message = "Hello!This is a simple email message $from = $email1; mail($to,$subject,$message,$headers); ? alert ("Enquiry form submited successfully ! We'll get back you soon "); What will be my fault..... What is the Fault in SMTP Server?

    Read the article

  • Cannot connect with Cisco VPN but can connect with ShrewSoft VPN

    - by rodey
    EDIT: We connected an air card to the computer to use a different Internet connection and using the Cisco software, we were able to successfully connect to our VPN server. I just don't understand why the ShrewSoft VPN client would connect but the Cisco connection won't. I'm not our network admin so sorry if I butcher some of the terminology. I have a computer at remote site that connects to our network through Cisco VPN. It uses the Cisco VPN software to do so. The problem is that the computer at this site cannot connect to our VPN because it is getting error "Reason 412: The remote peer is no longer responding." To see if perhaps something on their network was blocking the connection, I installed the ShrewSoft VPN client on the computer, imported our .pcf file and connected with no problem. I have tried two different versions of the Cisco VPN software (4.8.0.* and 5.0.03.*) and have the same problem. I installed Wireshark on the computer and have confirmed (while trying to connect through Cisco) that the computer is trying to contact the VPN server but is not receiving a response. We are not having any other problems regarding users not being able to connect. I'm at a loss at what else to check. I'll be monitoring this and have access to the computer at any time.

    Read the article

  • HOWTO: Disable complex password policy on Hyper-V Server 2008?

    - by Ian Boyd
    How do you disable the password complexity requirements on a Microsoft Hyper-V Server 2008 R2? Keep in mind that when you log into the server, the only UI you have is: And you cannot run gpedit.msc: C:\Users\Administrator>gpedit.msc 'gpedit.msc' is not recognized as an internal or external command, operable program or batch file. because there are no .msc snap-ins installed with Microsoft Hyper-V Server 2008 R2. The problem comes when you're trying to add an account to the server, so you can manage it, but it doesn't like most passwords: And, predictably, typing NET HELPMSG 2245 gives you The password does not meet the password policy requirements. Check the minimum p assword length, password complexity and password history requirements. i hoped it would have been a friendly user experience, and either: offered to disable the password policy tell me how to disable the password policy tell me how to check the minimum password length, password complexity and password history requirements. Password Complexity Requirements The Microsoft's default password complexity for Server Core is: Passwords cannot contain the user’s account name or parts of the user’s full name that exceed two consecutive characters. Passwords must be at least six characters in length. Passwords must contain characters from three of the following four categories: 1.English uppercase characters (A through Z). 2.English lowercase characters (a through z). 3.Base 10 digits (0 through 9). 4.Non-alphabetic characters (for example, !, $, #, %). External links Technet Forums: Hyper-V Server disable complex passwords Technet: Passwords must meet complexity requirements of the installed password filter Update: 2k views? So many people keep coming coming to it: up-vote it!

    Read the article

  • OSX - User home directories shared via NFS

    - by Hugh
    Hi, I've run into some problems with how I've got user home directories set up on our system here. Our server is an XServe, using Open Directory to manage the user accounts. The majority of our workstations are OSX, but there are a few running Linux (Centos 5.3), and, as time goes on, we expect the proportion of Linux workstations to increase (at some point, we expect to move the server side over to Linux too, but for now we're running with what we've already got) To ensure that the Linux and OSX workstations both see user's home directories in the same place, I shared the home directories using NFS. On the server end, the home directories are stored in: /Volumes/data/company_users This is mounted on the workstations to: /mount/company_users This work fine on the Linux workstations, but there is some weirdness under OSX. For the user who is logged in through the GUI, it all works just fine. However, if a user tries to SSH into a machine that they are not the primary user on, they often have no access to their own home directory. It looks as though OSX is trying to do something else to the user home directories mount point when you log in through the GUI.... For example, on this machine (nv001), I (hugh) am logged into the GUI. Last login: Mon Mar 8 18:17:52 on ttys011 [nv001:~] hugh% ls -al /mount/company_users total 40 drwxrwxrwx 26 hugh wheel 840 27 Jan 19:09 . drwxr-xr-x 6 admin admin 204 19 Dec 18:36 .. drwx------+ 128 hugh staff 4308 27 Feb 23:36 hugh drwx------+ 26 matt staff 840 4 Dec 14:14 matt [nv001:~] hugh% So Matt's home directory is accessible to him. However, if I try to switch to him: [nv001:~] hugh% su - matt Password: su: no directory [nv001:~] hugh% Or: [nv001:~] hugh% su matt Password: tcsh: Permission denied tcsh: Trying to start from "/mount/company_users/matt" tcsh: Trying to start from "/" [nv001:/] matt% Does anyone have any idea why it might be doing this? It's causing me all sorts of problems at the moment... The only machine that I can successfully switch users at the moment is the server that the user directories are stored on, where /mount/company_users is actually just a symlink to /Volumes/data/company_users Thanks

    Read the article

  • Windows Server Backup - Recover only shows the latest backup

    - by Steffen
    We're having quite some trouble at work using Windows Server Backup. We have a HyperV server (Win 2008) running 8 virtual web servers, these are running a variety of OS'es: Win 2003, Win 2008 and a lone Debian. Each virtual server has a separate partition on the physical HyperV server, so e.g. E: is virtual server #1, F: is #2 and so forth. For backup we use Windows Server Backup, or more exactly we use the commandline tool: wbadmin.exe We need to make the backups without stopping the virtual servers, as we cannot afford the downtime (we've got users online both day and night), and Windows Server Backup offers to use the shadow copy provider to archive this. We run wbadmin like this: wbadmin start backup -backuptarget:\\remotebackuplocation\somefolder -include:E: -quiet We run it once per partition, because we've got a script wrapped around that command, for sending us an email about how it went. Each time we run wbadmin it'll delete the Backup xxxx folder it created in last backup, and just create a new. In order to prevent this from happening, we rename the backup xxx folder after each backup is run, before starting the next one. I realize we must rename it back to its original name prior to recovering, and we obviously do this. Now the issue is as follows: Even though we have all the backed up files, and rename whichever backup we want to use, to its original name, we can only see the latest backup in the Windows Server Backup GUI when we select "Recover". This means we can only recover the last partition we backup up, so e.g. E: can never be recovered. In other words we're screwed :-( My question is: Does anyone know how to use Windows Server Backup for a scenario like this ? Or is it simply not possible due to the simplicity of Windows Server Backup ? If it's not possible, could you recommend some backup software for this purpose ? We've already looked at MS' System Center Data Protection Manager, however it's quite expensive and the boss doesn't like that :-/

    Read the article

  • apache eats up too much ram per child

    - by mrc4r7m4n
    Hello to everyone. I've got fallowing problem: Apache eat to many ram per child. The fallowing comments shows: cat /etc/redhat-release -- Fedora release 8 (Werewolf) free -m: total used free shared buffers cached Mem: 3566 3136 429 0 339 1907 -/+ buffers/cache: 889 2676 Swap: 4322 0 4322 I know that you will say that there is nothing to worry about because swap is not use, but i think it's not use for now. 3.httpd -v: Server version: Apache/2.2.14 (Unix) 4.httpd -l: Compiled in modules: core.c mod_authn_file.c mod_authn_default.c mod_authz_host.c mod_authz_groupfile.c mod_authz_user.c mod_authz_default.c mod_auth_basic.c mod_include.c mod_filter.c mod_log_config.c mod_env.c mod_setenvif.c mod_version.c mod_ssl.c prefork.c http_core.c mod_mime.c mod_status.c mod_autoindex.c mod_asis.c mod_cgi.c mod_negotiation.c mod_dir.c mod_actions.c mod_userdir.c mod_alias.c mod_rewrite.c mod_so.c 5.List of loaded dynamic modules: LoadModule authz_host_module modules/mod_authz_host.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule cgi_module modules/mod_cgi.so 6.My prefrok directive <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 25 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 4000 </IfModule> KeepAliveTimeout 6 MaxKeepAliveRequests 100 KeepAlive On 7.top -u apache: ctrl+ M top - 09:19:42 up 2 days, 19 min, 2 users, load average: 0.85, 0.87, 0.80 Tasks: 113 total, 1 running, 112 sleeping, 0 stopped, 0 zombie Cpu(s): 7.3%us, 15.7%sy, 0.0%ni, 75.7%id, 0.0%wa, 0.7%hi, 0.7%si, 0.0%st Mem: 3652120k total, 3149964k used, 502156k free, 348048k buffers Swap: 4425896k total, 0k used, 4425896k free, 1944952k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 16956 apache 20 0 700m 135m 100m S 0.0 3.8 2:16.78 httpd 16953 apache 20 0 565m 130m 96m S 0.0 3.7 1:57.26 httpd 16957 apache 20 0 587m 129m 102m S 0.0 3.6 1:47.41 httpd 16955 apache 20 0 567m 126m 93m S 0.0 3.6 1:43.60 httpd 17494 apache 20 0 626m 125m 96m S 0.0 3.5 1:58.77 httpd 17515 apache 20 0 540m 120m 88m S 0.0 3.4 1:45.57 httpd 17516 apache 20 0 573m 120m 88m S 0.0 3.4 1:50.51 httpd 16954 apache 20 0 551m 120m 88m S 0.0 3.4 1:52.47 httpd 17493 apache 20 0 586m 120m 94m S 0.0 3.4 1:51.02 httpd 17279 apache 20 0 568m 117m 87m S 16.0 3.3 1:51.87 httpd 17302 apache 20 0 560m 116m 90m S 0.3 3.3 1:59.06 httpd 17495 apache 20 0 551m 116m 89m S 0.0 3.3 1:47.51 httpd 17277 apache 20 0 476m 114m 81m S 0.0 3.2 1:37.14 httpd 30097 apache 20 0 536m 113m 83m S 0.0 3.2 1:47.38 httpd 30112 apache 20 0 530m 112m 81m S 0.0 3.2 1:40.15 httpd 17513 apache 20 0 516m 112m 85m S 0.0 3.1 1:43.92 httpd 16958 apache 20 0 554m 111m 82m S 0.0 3.1 1:44.18 httpd 1617 apache 20 0 487m 111m 85m S 0.0 3.1 1:31.67 httpd 16952 apache 20 0 461m 107m 75m S 0.0 3.0 1:13.71 httpd 16951 apache 20 0 462m 103m 76m S 0.0 2.9 1:28.05 httpd 17278 apache 20 0 497m 103m 76m S 0.0 2.9 1:31.25 httpd 17403 apache 20 0 537m 102m 79m S 0.0 2.9 1:52.24 httpd 25081 apache 20 0 412m 101m 70m S 0.0 2.8 1:01.74 httpd I guess thats all information needed to help me solve this problem. I think the virt memory is to big, the same res. The consumption of ram is increasing all the time. Maybe it's memory leak because i see there is so many static modules compiled. Could someone help me with this issue? Thank you in advance. 8.ldd /usr/sbin/httpd linux-gate.so.1 => (0x0012d000) libm.so.6 => /lib/libm.so.6 (0x0012e000) libpcre.so.0 => /lib/libpcre.so.0 (0x00157000) libselinux.so.1 => /lib/libselinux.so.1 (0x0017f000) libaprutil-1.so.0 => /usr/lib/libaprutil-1.so.0 (0x0019a000) libcrypt.so.1 => /lib/libcrypt.so.1 (0x001b4000) libldap-2.3.so.0 => /usr/lib/libldap-2.3.so.0 (0x001e6000) liblber-2.3.so.0 => /usr/lib/liblber-2.3.so.0 (0x00220000) libdb-4.6.so => /lib/libdb-4.6.so (0x0022e000) libexpat.so.1 => /lib/libexpat.so.1 (0x00370000) libapr-1.so.0 => /usr/lib/libapr-1.so.0 (0x00391000) libpthread.so.0 => /lib/libpthread.so.0 (0x003b9000) libdl.so.2 => /lib/libdl.so.2 (0x003d2000) libc.so.6 => /lib/libc.so.6 (0x003d7000) /lib/ld-linux.so.2 (0x00110000) libuuid.so.1 => /lib/libuuid.so.1 (0x00530000) libresolv.so.2 => /lib/libresolv.so.2 (0x00534000) libsasl2.so.2 => /usr/lib/libsasl2.so.2 (0x00548000) libssl.so.6 => /lib/libssl.so.6 (0x00561000) libcrypto.so.6 => /lib/libcrypto.so.6 (0x005a6000) libgssapi_krb5.so.2 => /usr/lib/libgssapi_krb5.so.2 (0x006d9000) libkrb5.so.3 => /usr/lib/libkrb5.so.3 (0x00707000) libcom_err.so.2 => /lib/libcom_err.so.2 (0x0079a000) libk5crypto.so.3 => /usr/lib/libk5crypto.so.3 (0x0079d000) libz.so.1 => /lib/libz.so.1 (0x007c3000) libkrb5support.so.0 => /usr/lib/libkrb5support.so.0 (0x007d6000) libkeyutils.so.1 => /lib/libkeyutils.so.1 (0x007df000) Currently i cant restart the apache. I work in a company and now there is rush hours. I will do that about 5 pm. Current top -u apache: shift + M top - 12:31:33 up 2 days, 3:30, 1 user, load average: 0.73, 0.80, 0.79 Tasks: 114 total, 1 running, 113 sleeping, 0 stopped, 0 zombie Cpu(s): 3.3%us, 4.7%sy, 0.0%ni, 90.0%id, 1.3%wa, 0.3%hi, 0.3%si, 0.0%st Mem: 3652120k total, 3169720k used, 482400k free, 353372k buffers Swap: 4425896k total, 0k used, 4425896k free, 1978688k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 16957 apache 20 0 708m 145m 117m S 0.0 4.1 2:11.32 httpd 16956 apache 20 0 754m 142m 107m S 0.0 4.0 2:33.94 httpd 16955 apache 20 0 641m 136m 103m S 5.3 3.8 1:58.37 httpd 17515 apache 20 0 624m 131m 99m S 0.0 3.7 2:03.90 httpd 16954 apache 20 0 627m 130m 98m S 0.0 3.6 2:13.87 httpd 17302 apache 20 0 625m 124m 97m S 0.0 3.5 2:10.80 httpd 17403 apache 20 0 624m 114m 91m S 0.0 3.2 2:08.85 httpd 16952 apache 20 0 502m 114m 81m S 0.0 3.2 1:23.78 httpd 16186 apache 20 0 138m 61m 35m S 0.0 1.7 0:15.54 httpd 16169 apache 20 0 111m 49m 17m S 0.0 1.4 0:06.00 httpd 16190 apache 20 0 126m 48m 24m S 0.0 1.4 0:11.44 httpd 16191 apache 20 0 109m 48m 19m S 0.0 1.4 0:04.62 httpd 16163 apache 20 0 114m 48m 21m S 0.0 1.4 0:09.60 httpd 16183 apache 20 0 127m 48m 23m S 0.0 1.3 0:11.23 httpd 16189 apache 20 0 109m 47m 17m S 0.0 1.3 0:04.55 httpd 16201 apache 20 0 106m 47m 17m S 0.0 1.3 0:03.90 httpd 16193 apache 20 0 103m 46m 20m S 0.0 1.3 0:10.76 httpd 16188 apache 20 0 107m 45m 18m S 0.0 1.3 0:04.85 httpd 16168 apache 20 0 103m 44m 17m S 0.0 1.2 0:05.61 httpd 16187 apache 20 0 118m 41m 21m S 0.0 1.2 0:08.50 httpd 16184 apache 20 0 111m 41m 19m S 0.0 1.2 0:09.28 httpd 16206 apache 20 0 110m 41m 20m S 0.0 1.2 0:11.69 httpd 16199 apache 20 0 108m 40m 17m S 0.0 1.1 0:07.76 httpd 16166 apache 20 0 104m 37m 18m S 0.0 1.0 0:04.31 httpd 16185 apache 20 0 99.3m 36m 16m S 0.0 1.0 0:04.16 httpd as you can see the memory usage growing up from e.g. res( 135 to 145)m and it will be growing up till memory ends. Are you sure that this option i set up: <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 25 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 4000 </IfModule> KeepAliveTimeout 6 MaxKeepAliveRequests 100 KeepAlive On are correct? Maybe i should decrease some of them? Another questions that bother me: I got e.g. static module mod_negotiation.c compiled into apache and the same module loaded as dynamic. Is this normal that i've loaded duplicated module. But when i want to remove dynamic module(mod_negotiation.c) from httpd.conf and then restart apache error appears. Now I cant tell this error message because i cant restart apache :( Hello again:) This is memory usage just after restart apache: top - 16:19:12 up 2 days, 7:18, 3 users, load average: 1.08, 0.91, 0.91 Tasks: 109 total, 2 running, 107 sleeping, 0 stopped, 0 zombie Cpu(s): 17.0%us, 25.7%sy, 51.0%ni, 4.7%id, 0.0%wa, 0.3%hi, 1.3%si, 0.0%st Mem: 3652120k total, 2762516k used, 889604k free, 361552k buffers Swap: 4425896k total, 0k used, 4425896k free, 2020980k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 13569 apache 20 0 93416 43m 15m S 0.0 1.2 0:02.55 httpd 13575 apache 20 0 98356 38m 16m S 32.3 1.1 0:02.55 httpd 13571 apache 20 0 86808 33m 12m S 0.0 0.9 0:02.60 httpd 13568 apache 20 0 86760 33m 12m S 0.0 0.9 0:00.81 httpd 13570 apache 20 0 83480 33m 12m S 0.0 0.9 0:00.51 httpd 13572 apache 20 0 63520 5916 1548 S 0.0 0.2 0:00.02 httpd 13573 apache 20 0 63520 5916 1548 S 0.0 0.2 0:00.02 httpd 13574 apache 20 0 63520 5916 1548 S 0.0 0.2 0:00.02 httpd 13761 apache 20 0 63388 5128 860 S 0.0 0.1 0:00.01 httpd 13762 apache 20 0 63388 5128 860 S 0.0 0.1 0:00.01 httpd 13763 apache 20 0 63388 5128 860 S 0.0 0.1 0:00.00 httpd I will try to compile apache from source to newest version. Thx for help guys.

    Read the article

  • Firefox Using Prism Website Icon instead of Firefox Icon in Taskbar

    - by Yaakov Ellis
    A while back, I created a website shortcut using the now discontinued Prism extension for Firefox. This worked fine at the time. However, now that Prism has been discontinued, whenever I open Firefox, when the shortcut for FF shows up my Windows taskbar, it does so with the website favico for the old Prism shortcut site that I created. If I right-click on the taskbar shortcut, it shows the old shortcut to the Prism app (even though I deleted its entry manually from C:\Users\USERNAME\AppData\Roaming\WebApps). If I then click on [Pin to Taskbar] and then right click and [Unpin from Taskbar], the icon will switch back to the FF icon. If I righ-click on it a third time, it will switch back to the Prism site favico. I assume that if I were able to install Prism, then it would give me some way to remove the site. However, since Prism is discontinued and incompatible with the current version of FF, that is not an option. What I would like to do: completely remove references to the Prism app from my computer: Disassociate the prism website Favico from Firefox, so that it never replaces the FF icon in the Windows taskbar Shortcut to the Prism site will never shot up in the right-click menu for FF

    Read the article

  • DNS Server address configured inside Router not working

    - by Charandeep Singh
    Well, I have an ISP router in which I have configured DNS Servers to use (Primary & Secondary) like Google DNS. It works just fine. But now I have setup a computer with DNS server (Simple DNS Plus). I got it working by settings my internal DNS Server IP Address in computer. i.e. 192.168.1.3 So, instead of settings my internal DNS IP Address in every computer in my network, I want to setup DNS Server into my router. So on every DHCP request, computer get DNS Server to use. So I configured it like this: Primary DNS: 192.168.1.3 Secondry DNS: (left blank) After applying and DNS Requests stop resolving. But strange part is DNS request does goes to DNS Server but maybe not returned back, because all DNS request were available in cache logs. I don't know why this is not working, let me know if you have any solution or wordaround for this. Thanks! Update 1: NSLOOKUP Result C:\Users\user>nslookup google.com DNS request timed out. timeout was 2 seconds. Server: UnKnown Address: 192.168.1.1 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. *** Request to UnKnown timed-out

    Read the article

  • Temp file folder full, but clearing it out doesn't seem to work

    - by Vegar Westerlund
    I got this error on our build server: MSB6003: The specified task executable could not be run. MSB5003: Failed to create a temporary file. Temporary files folder is full or its path is incorrect. The directory name is invalid. [C:\Users\swdev_build\bamboo-agent-home\xml-data\build-dir\XXXX-ZZZZZZ-JOB1\build.xml] This was when trying to run and msbuild task to run our test suite. Using the power of google it seemed that this should be a problem with the %TEMP% folder running out of tmp file names apparently because a 4 digit hex name is used (for a total of 65535 temporary files). The problem is that the error persist, even after going into the %TEMP% folder and deleting everything before rebooting the machine. Does anyone know how to fix the issue and more importantly how to prevent it from happening again? What is the preferred way of cleaning up this temp files? Make it a part of the build process? Update: Actually I cleared the TEMP folder of the only local user, but since the build server is running as the SYSTEM user, it probably has some temp folder somewhere else.

    Read the article

  • Windows Vista DHCP bug, arp authorize, isc dhcp, workaround

    - by jinanwow
    I am trying to find a workaround for the Windows Vista Force Broadcast bug with ISC DHCP and a Cisco Router. The problem is not windows vista trying to obtain an IP address from us that works fine (with or without the flag enabled). THe problem is we are using a cisco router and the command 'arp authorized' to prevent users from using static IP addresses on the network. The problem is, if Windows Vista sets the boot flag to true the command 'arp authorized' will not work, as it looks for the IP address and destination MAC address in the DHCP Offer Packet to add it to its arp table. The machine will DHCP just fine, but since the ARP table is not aware of the machine, it is unable to access the internet. If I disable the broadcast flag in vista, the next time it DHCPs an arp entry gets created since the DHCP Offer is unicast instead of broadcast. The thing is, we can not tell 500 to 1000 people to edit their registry, so we need a workaround for this issue. I have not had much success in finding a workaround. The question is, is there a way to force or trick ISC DHCP into unicasting a responce back to the user. Either on the Cisco Side, ISC DHCP side or intercepting and rewriting the DHCP Discover UDP packet to turn off the flag before it reaches ISC DHCP?

    Read the article

  • MultiView 2000 terminal emulator not printing correctly to Generic/Text Printer on Windows 7

    - by FantaFan
    Guys & gals, Hope someone can shed some light on this. I am downloading reports from an AIX-based system by directing them to a TT printer which the terminal emulator (MultiView 2000) intercepts and directs to the default printer on the local system. This local printer is configured as a vanilla Generic/Text printer attached to a FILE port. When I print from AIX, the output is spooled down and the local printer prompts for a file name into which to save the file...but not under Windows 7. This has worked fine for many years, on both Win2K and WinXP. However, on Windows 7 the output gets spooled as a file into spool\PRINTERS (and looks as expected) but the print job then hangs with a status of "Error - Printing" and never prompts for a file name. I have to cancel the job. The Generic/Text printer works as expected with other applications. I have tried setting the printer to print directly rather than spooling but this only serves to hang the terminal session too. I've also tried to run the emulator in Windows 2000 Compatibility Mode and as Administrator in case it was something like that but with no luck. As you might expect, it does work fine in XP Mode (as long as I print to a printer defined therein and not the host's printer) but operationally this isn't going to be an option. Obviously this emulation software is a decade old (at least) and I could just cross/upgrade all the users (at a cost) but, before I do so, has anyone seen this sort of behaviour before and found some sort of fix? Remote OS: AIX 5 Client OS: Windows 7 Pro (32-bit) Printer: Generic/Text on a FILE port TE Software: MultiView 2000 (320-bit) Thanks in advance.

    Read the article

  • How to reset Bash on Mac OSX, .bash_profile corrupted and bash no longer works

    - by user1463172
    I am on a MacBook Pro, running the latest version of Mountain Lion. I really need some help, I have managed some how to damage my .bash_profile (I think) so that every time I open up the terminal I get the error listed below. -bash: export: `/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/go/bin': not a valid identifier -bash: export: `/Users/rob/Applications/sbt/bin:': not a valid identifier env: bash: No such file or directory env: bash: No such file or directory env: bash: No such file or directory env: bash: No such file or directory env: bash: No such file or directory -bash: tar: command not found -bash: grep: command not found -bash: cat: command not found -bash: find: command not found I am not sure what has happened, I have no sudo, cd or any normal commands. The only way I have been able to get to any of the main directories is through the go to folder command in finder and try to find the file to no avail. To top it all off I think I created a file that might be causing the issue, I wanted to edit the .bash_profile so I typed sudo nano ./bash_profile This open a new file in nano which I think was then saved. After this I opened the real .bash_profile to add in the path for node.js. If I can get to the .bash_profile I think I can get it back on track but I can't find it, should I reinstall bash? If so how would I do that on a mac, I tried using brew install bash to which I get -bash: brew: command not found I am really stuck if anyone can help I would be really appreciated. Many thanks

    Read the article

  • Samba on OS X 10.6.4

    - by Niklas Saers
    I just updated from 10.6.3 to 10.6.4, and now my Samba shares won't mount and won't allow access into the directories. In the logs, I've started to get the following errors, any idea what might have gone wrong? 2010/06/25 15:54:27, 0, pid=13848] /SourceCache/samba/samba-235.4/samba/source/passdb/secrets.c:secrets_fetch_domain_sid(150) secrets_fetch_domain_sid:opendirectory_query_domain_sid gave -14136 [eDSRecordNotFound] [2010/06/25 15:54:27, 0, pid=13850] /SourceCache/samba/samba-235.4/samba/source/lib/opendirectory.c:get_opendirectory_authenticator(247) failed to read DomainAdmin credentials, err=67 fd=19 errno=34 [2010/06/25 15:54:27, 1, pid=13850] /SourceCache/samba/samba-235.4/samba/source/smbd/service.c:make_connection_snum(1092) winsrv (10.0.0.8) connect to service Dates initially as user johnd (uid=1028, gid=20) (pid 13850) [2010/06/25 15:54:42, 1, pid=13850] /SourceCache/samba/samba-235.4/samba/source/smbd/service.c:close_cnum(1289) winsrv (10.0.0.8) closed connection to service Dates [2010/06/25 15:54:44, 0, pid=13850] /SourceCache/samba/samba-235.4/samba/source/passdb/pdb_odsam.c:odssam_getsampwnam(1576) opendirectory_sam_searchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Users record for account 'Administrator' [2010/06/25 15:54:48, 0, pid=13850] /SourceCache/samba/samba-235.4/samba/source/lib/opendirectory.c:get_opendirectory_authenticator(247) failed to read DomainAdmin credentials, err=67 fd=28 errno=34 [2010/06/25 15:54:48, 1, pid=13850] /SourceCache/samba/samba-235.4/samba/source/smbd/service.c:make_connection_snum(1092) winsrv (10.0.0.8) connect to service Dates initially as user johnd (uid=1028, gid=20) (pid 13850) Cheers Nik

    Read the article

  • Generic/Text Printer on Windows 7 not prompting for file name

    - by FantaFan
    Guys & gals, Hope someone can shed some light on this. I am downloading reports from an AIX-based system by directing them to a TT printer which the terminal emulator (MultiView 2000) intercepts and directs to the default printer on the local system. This local printer is configured as a vanilla Generic/Text printer attached to a FILE port. When I print from AIX, the output is spooled down and the local printer prompts for a file name into which to save the file...but not under Windows 7. This has worked fine for many years, on both Win2K and WinXP. However, on Windows 7 the output gets spooled as a file into spool\PRINTERS (and looks as expected) but the print job then hangs with a status of "Error - Printing" and never prompts for a file name. I have to cancel the job. The Generic/Text printer works as expected with other applications. I have tried setting the printer to print directly rather than spooling but this only serves to hang the terminal session too. I've also tried to run the emulator in Windows 2000 Compatibility Mode and as Administrator in case it was something like that but with no luck. As you might expect, it does work fine in XP Mode (as long as I print to a printer defined therein and not the host's printer) but operationally this isn't going to be an option. Obviously this emulation software is a decade old (at least) and I could just cross/upgrade all the users (at a cost) but, before I do so, has anyone seen this sort of behaviour before and found some sort of fix? Remote OS: AIX 5 Client OS: Windows 7 Pro (32-bit) Printer: Generic/Text on a FILE port TE Software: MultiView 2000 (32-bit) Thanks in advance.

    Read the article

  • Why does DEP kill IE when accessing Microsoft FTP?

    - by Sammy
    I start up IE (9.0.8112.16421) with about:blank and I go to ftp://ftp.microsoft.com/ I press Alt, click View and then Open FTP Site in Windows Explorer. At this point IE stops responding and eventually crashes (though the window is still active, sometimes) and I get the usual Windows dialog box saying that the program has stopped working. From this dialog box I click on the option to try to find solutions to the problem and the progress bar just keeps scrolling without giving me any result page whatsoever, so I have to abort by clicking Cancel. Then I get the bubble type of pop-up message from the system tray saying that DEP has stopped the program from executing. What gives? Why would DEP (part of Microsoft Windows) be preventing IE (a Microsoft product) from performing a perfectly legitimate action from Microsoft's own FTP site? The OS is Windows Vista HP SP2, Swedish locale. Screenshots as follows... Update: I normally have UAC disabled, but I have discovered that enabling it has an effect on IE when I click the FTP option from the View menu, just as I suspected. I basically tried starting IE in its 32-bit and 64-bit version, with and without add-ons, and switching UAC on and off, and then trying to go to View and the FTP option (as shown above). Here are the results. With UAC off and DEP on Action: IE 32-bit, normal start, go to ftp://ftp.microsoft.com/, view menu, FTP option. Result: crash Action: IE 32-bit, extoff, go to ftp://ftp.microsoft.com/, view menu, FTP option. Result: crash Action: IE 64-bit, normal start, go to ftp://ftp.microsoft.com/, view menu, FTP option. Result: information & warning message Action: IE 64-bit, extoff, go to ftp://ftp.microsoft.com/, view menu, FTP option. Result: information & warning message This is the information and warning message I get if I use IE 64-bit: The first message is an FTP proxy warning. It says that the folder ftp://ftp.microsoft.com/ will be write-protected because proxy server is not configured to allow full access. It goes on to say that if I want to move, paste, change name or delete files I must use another type of proxy, and that I should contact the system admin for more information (the usual recommendation when they have no clue of what's going on). What the heck is all this about? I don't even use a proxy server, as you can see from the next screenshot (Internet Options, Connections, LAN settings dialog). That second message only states that the FTP site cannot be viewed in (Windows) Explorer. With UAC off, I always get these two messages when running the 64-bit version of IE. With UAC on and DEP on Action: IE 32-bit, normal start, go to ftp://ftp.microsoft.com/, view menu, FTP option. Result: crash Action: IE 32-bit, extoff, go to ftp://ftp.microsoft.com/, view menu, FTP option. Result: security warning message, prompts to allow action Action: IE 64-bit, normal start, go to ftp://ftp.microsoft.com/, view menu, FTP option. Result: security warning message, prompts to allow action Action: IE 64-bit, extoff, go to ftp://ftp.microsoft.com/, view menu, FTP option. Result: security warning message, prompts to allow action As you can see from this list, if I have UAC enabled I actually get rid of these messages and opening the FTP site in Windows Explorer (from IE) actually works (except for 32-bit version which still crashes). Here is the security warning message: The fact that the 32-bit IE still crashes could be an indicator that this has something to do with one or several add-ons in that bit-version of IE. The 32-bit IE doesn't crash if it's started with the extoff flag. If this is affecting only the 32-bit IE then it's only normal that the 64-bit IE doesn't have this problem because it would not be using any of the add-ons used by the 32-bit version, they are not compatible with 64-bit (although some add-ons work both with 32-bit and 64-bit IE). Figuring out which add-on (if any) is causing this problem is a whole new question... but I seem to be closer to an answer now, and a possible solution. I could of course just add IE (32-bit) in the exclusion list of DEP. In fact, I have already tested this and it causes IE to perform this task without hiccups. But I don't really want to disable DEP, or force it on all Windows programs and services (except the ones I strictly specify in the exception list). (In other words DEP can't really be completely disabled, you can only switch between two modes of operation.) Update 2: This is interesting... I start 32-bit IE, go to ftp://ftp.microsoft.com/ and click on View, and Open FTP Site in Windows Explorer. The result is a crash!! Then I start 32-bit IE with extoff flag to disable add-ons, I go to ftp://ftp.microsoft.com/ and click on View, and Open FTP Site in Windows Explorer. I get the security warning, as expected with UAC enabled, and it opens up in Windows Explorer. Now... I close Windows Explorer, and I close IE. I then start 32-bit IE (normal start, with add-ons), I go to ftp://ftp.microsoft.com/ and click on View, and Open FTP Site in Windows Explorer. Now this time it doesn't crash! Instead, I get the screenshot number 5 as seen above. This is the FTP proxy warning message. Now get this... if I click the close button to get rid of this message, what happens is that Firefox starts up, and it goes to ftp://ftp.microsoft.com/ The fact that this works with 32-bit IE (with add-ons) the second time around, is because I am still logged in as anonymous to the FTP server. The log-in has not timed out yet. Standard log-in timeout for FTP servers is usually 60 to 120 seconds. I got logged in to it the first time I ran 32-bit IE with the extoff flag (no add-ons) which actually works and connects using Windows Explorer. Update 3: The connection to the FTP server has timed out by now. So now if I run 32-bit IE (with add-ons) and repeat the steps as before it crashes, just as expected... In conclusion: If I have already been connected to the FTP server via Windows Explorer, and I go to this FTP address in 32-bit IE and I pick the FTP option from the view menu to open it in Windows Explorer, it gives me a FTP proxy server warning and then opens the address in default web browser (Firefox in my case). If I have not been connected to the FTP server via Windows Explorer previously, and I go to this FTP address in 32-bit IE and I pick the FTP option from the view menu top open it in Windows Explorer, then it crashes IE! This is just great... It's not that I care much for using Internet Explorer or the Windows Explorer to log in to FTP servers. This just shows why IE is not the best browser choice. This reminds me of the time when Microsoft was enforcing the use of Internet Explorer as default browser for opening web links and other web resources, despite the fact that the user had installed an alternative browser on the system. Even if the user explicitly set the default browser to be something else and not Internet Explorer in the Windows options, IE would still pop up sometimes, depending on what web resources the user was trying to access. Setting default browser had no effect. It was hard-coded that IE is the browser of choice, especially when accessing Microsoft product or help pages. The web page would actually say that you are not using IE, and that you must open it in IE to view it. Unfortunately you would not be able to open it manually in a different browser by simply copying and pasting the URL from the address bar, because it would show a different URL, and the original URL would re-direct to the "you are using the wrong browser" page so you would not have the time to cut it to clipboard. Thankfully those days are over. Now-days Microsoft is forced to distribute IE and WMP free versions of Windows for the EU market. The way it should be! These programs have to be optional, not mandatory.

    Read the article

  • How do I upgrade PHP on CentOS and Kloxo?

    - by Emerson
    I need to upgrade PHP so that I can upgrade joomla on my dedicated server. I have: kloxo 6.1.6 php-5.2.17-1 Linux CentOS-55-64-minimal 2.6.18-194.32.1.el5 x86_64 x86_64 x86_64 GNU/Linux I searched everywhere and I could only find that PHP 5.3 isn't compatible with zend. I would like to upgrade to 5.2.4, which is the minimum for joomla 1.6 and 1.7. I tried to run: yum update php.x86_64 Which is the PHP package installed, but it didn't work. This is a production server with quite a few users across many sites, so I wanted to do it as safely as possible. Is it safe to run "yum update"? It showed me 6 packages to install and 125 packages to update, including a kernel. Is that safe? I haven't touched kloxo's yum repositories. Update: I just successfully ran "yum update". Now I think I need to know how to add a new repository that has the 5.2.4 and how to update to that specific version. Any ideas?

    Read the article

  • LDAP authentication issue with Kerio Connect

    - by djk
    We have Kerio Connect (mail server) running on a Windows Server 2003 server on a domain. In the webmail client, users are able to change their domain password. This functionality used to work fine until a user tried to change their password a few days ago, when every password they'd try would result in the webmail client claiming their password was "invalid". I spoke to Kerio about this and they claim that this error is returned by the domain controller, which supports my initial investigations. The error that the DC is logging when an attempt is made to change the password is this: "80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 52e, vece" The "data 52e" part indicates that this is an "invalid credentials" error. I don't see how this can be as I've tried (in the Kerio Connect configuration) various accounts that have privileges to modify accounts, including my own as I am a domain admin. I have ran 'dcdiag' (all tests) on the DC and it came back passing every single one of them. I've searched high and low for an answer to this and came up empty. Does anyone have any idea why this may have suddenly started happening? Thanks! Edit: I should mention that the passwords we are changing to do comply with the complexity policy.

    Read the article

  • Existing open source software for wireless mesh networking?

    - by user70352
    Hello! My goal: Build a wireless mesh network with some ALIX 2D2 (500 MHz AMD Geode LX800 x86 CPU, 256MB RAM, Atheros wireless card) Aside from working like a normal wireless mesh network users should be able to read/write data from/to the ALIX Boxes and the ALIX boxes should be able to process data. Questions: Should I try to flash dd-wrt x86, voyage linux (linux.voyage.hk) or something else? What (open source) software should I look into before I start? Should I use a 'server' for data storage and processing instead of the ALIX boxes? Is it even possible to use the ALIX boxes for routing AND data storage and processing? Final notes: Data can be anything, for example, I want to setup a wireless mesh using the OLSRD protocol so my whole town gets wifi and can access songs on the network. It's not for that, but that's the idea. I'm not afraid of programing, compiling or working with *nix. This is mostly 'for fun' rather than for practicality. Thanks in advance for any feedback.

    Read the article

  • FreeBSD performance tuning. Sysctls, loader.conf, kernel.

    - by SaveTheRbtz
    I wanted to share knowledge of tuning FreeBSD via sysctls, so i'm posting them with comments. Based on Igor Sysoev (author of nginx) presentation about FreeBSD tuning up to 100,000-200,000 active connections. Sysctls are for 7.x FreeBSD. Since 7.2 amd64 some of them are tuned well by default. Prior 7.0 some of them are boot only (set via /boot/loader.conf) or does not exist at all. Highload web server sysctls: # Max. backlog size kern.ipc.somaxconn=4096 # Shared memory // 7.2+ can use shared memory > 2Gb kern.ipc.shmmax=2147483648 # Sockets kern.ipc.maxsockets=204800 # Do not use lager sockbufs on 8.0 # ( http://old.nabble.com/Significant-performance-regression-for-increased-maxsockbuf-on-8.0-RELEASE-tt26745981.html#a26745981 ) kern.ipc.maxsockbuf=262144 # Recive clusters (on amd64 7.2+ 65k is default) # For such high value vm.kmem_size must be increased to 3G #kern.ipc.nmbclusters=229376 # Jumbo pagesize(4k/8k) clusters # Used as general packet storage for jumbo frames # can be monitored via `netstat -m` #kern.ipc.nmbjumbop=192000 # Jumbo 9k/16k clusters # If you are using them #kern.ipc.nmbjumbo9=24000 #kern.ipc.nmbjumbo16=10240 # Every socket is a file, so increase them kern.maxfiles=204800 kern.maxfilesperproc=200000 kern.maxvnodes=200000 # Turn off receive autotuning #net.inet.tcp.recvbuf_auto=0 # Small receive space, only usable on http-server, on file server this # should be increased to 65535 or even more #net.inet.tcp.recvspace=8192 # Small send space is useful for http servers that serve small files # Autotuned since 7.x net.inet.tcp.sendspace=16384 # This should be enabled if you going to use big spaces (>64k) #net.inet.tcp.rfc1323=1 # Turn this off on highspeed, lossless connections (LAN 1Gbit+) #net.inet.tcp.delayed_ack=0 # This feature is useful if you are serving data over modems, Gigabit Ethernet, # or even high speed WAN links (or any other link with a high bandwidth delay product), # especially if you are also using window scaling or have configured a large send window. # You can try setting it to 0 on fileserver with 1GBit+ interfaces # Automatically disables on small RTT ( http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/netinet/tcp_subr.c?#rev1.237 ) #net.inet.tcp.inflight.enable=0 # Disable randomizing of ports to avoid false RST # Before usage check SA here www.bsdcan.org/2006/papers/ImprovingTCPIP.pdf # (it's also says that port randomization auto-disables at some conn.rates, but I didn't tested it thou) #net.inet.ip.portrange.randomized=0 # Increase portrange # For outgoing connections only. Good for seed-boxes and ftp servers. net.inet.ip.portrange.first=1024 net.inet.ip.portrange.last=65535 # Security net.inet.ip.redirect=0 net.inet.ip.sourceroute=0 net.inet.ip.accept_sourceroute=0 net.inet.icmp.maskrepl=0 net.inet.icmp.log_redirect=0 net.inet.icmp.drop_redirect=1 net.inet.tcp.drop_synfin=1 # Security net.inet.udp.blackhole=1 net.inet.tcp.blackhole=2 # Increases default TTL, sometimes useful # Default is 64 net.inet.ip.ttl=128 # Lessen max segment life to conserve resources # ACK waiting time in miliseconds (default: 30000 from RFC) net.inet.tcp.msl=5000 # Max bumber of timewait sockets net.inet.tcp.maxtcptw=40960 # Don't use tw on local connections # As of 15 Apr 2009. Igor Sysoev says that nolocaltimewait has some buggy realization. # So disable it or now till get fixed #net.inet.tcp.nolocaltimewait=1 # FIN_WAIT_2 state fast recycle net.inet.tcp.fast_finwait2_recycle=1 # Time before tcp keepalive probe is sent # default is 2 hours (7200000) #net.inet.tcp.keepidle=60000 # Should be increased until net.inet.ip.intr_queue_drops is zero net.inet.ip.intr_queue_maxlen=4096 # Interrupt handling via multiple CPU, but with context switch. # You can play with it. Default is 1; #net.isr.direct=0 # This is for routers only #net.inet.ip.forwarding=1 #net.inet.ip.fastforwarding=1 # This speed ups dummynet when channel isn't saturated net.inet.ip.dummynet.io_fast=1 # Increase dummynet(4) hash #net.inet.ip.dummynet.hash_size=2048 #net.inet.ip.dummynet.max_chain_len # Should be increased when you have A LOT of files on server # (Increase until vfs.ufs.dirhash_mem becames lower) vfs.ufs.dirhash_maxmem=67108864 # Explicit Congestion Notification (see http://en.wikipedia.org/wiki/Explicit_Congestion_Notification) net.inet.tcp.ecn.enable=1 # Flowtable - flow caching mechanism # Useful for routers #net.inet.flowtable.enable=1 #net.inet.flowtable.nmbflows=65535 # Extreme polling tuning #kern.polling.burst_max=1000 #kern.polling.each_burst=1000 #kern.polling.reg_frac=100 #kern.polling.user_frac=1 #kern.polling.idle_poll=0 # IPFW dynamic rules and timeouts tuning # Increase dyn_buckets till net.inet.ip.fw.curr_dyn_buckets is lower net.inet.ip.fw.dyn_buckets=65536 net.inet.ip.fw.dyn_max=65536 net.inet.ip.fw.dyn_ack_lifetime=120 net.inet.ip.fw.dyn_syn_lifetime=10 net.inet.ip.fw.dyn_fin_lifetime=2 net.inet.ip.fw.dyn_short_lifetime=10 # Make packets pass firewall only once when using dummynet # i.e. packets going thru pipe are passing out from firewall with accept #net.inet.ip.fw.one_pass=1 # shm_use_phys Wires all shared pages, making them unswappable # Use this to lessen Virtual Memory Manager's work when using Shared Mem. # Useful for databases #kern.ipc.shm_use_phys=1 /boot/loader.conf: # Accept filters for data, http and DNS requests # Usefull when your software uses select() instead of kevent/kqueue or when you under DDoS # DNS accf available on 8.0+ accf_data_load="YES" accf_http_load="YES" accf_dns_load="YES" # Async IO system calls aio_load="YES" # Adds NCQ support in FreeBSD # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ # 8.0+ only #ahci_load= #siis_load= # Increase kernel memory size to 3G. # # Use ONLY if you have KVA_PAGES in kernel configuration, and you have more than 3G RAM # Otherwise panic will happen on next reboot! # # It's required for high buffer sizes: kern.ipc.nmbjumbop, kern.ipc.nmbclusters, etc # Useful on highload stateful firewalls, proxies or ZFS fileservers # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #vm.kmem_size="3G" # Older versions of FreeBSD can't tune maxfiles on the fly #kern.maxfiles="200000" # Useful for databases # Sets maximum data size to 1G # (FreeBSD 7.2+ amd64 users: Check that current value is lower!) #kern.maxdsiz="1G" # Maximum buffer size(vfs.maxbufspace) # You can check current one via vfs.bufspace # Should be lowered/upped depending on server's load-type # Usually decreased to preserve kmem # (default is 200M) #kern.maxbcache="512M" # Sendfile buffers # For i386 only #kern.ipc.nsfbufs=10240 # syncache Hash table tuning net.inet.tcp.syncache.hashsize=1024 net.inet.tcp.syncache.bucketlimit=100 # Incresed hostcache net.inet.tcp.hostcache.hashsize="16384" net.inet.tcp.hostcache.bucketlimit="100" # TCP control-block Hash table tuning net.inet.tcp.tcbhashsize=4096 # Enable superpages, for 7.2+ only # Also read http://lists.freebsd.org/pipermail/freebsd-hackers/2009-November/030094.html vm.pmap.pg_ps_enabled=1 # Usefull if you are using Intel-Gigabit NIC #hw.em.rxd=4096 #hw.em.txd=4096 #hw.em.rx_process_limit="-1" # Also if you have ALOT interrupts on NIC - play with following parameters # NOTE: You should set them for every NIC #dev.em.0.rx_int_delay: 250 #dev.em.0.tx_int_delay: 250 #dev.em.0.rx_abs_int_delay: 250 #dev.em.0.tx_abs_int_delay: 250 # There is also multithreaded version of em drivers can be found here: # http://people.yandex-team.ru/~wawa/ # # for additional em monitoring and statistics use # `sysctl dev.em.0.stats=1 ; dmesg` # #Same tunings for igb #hw.igb.rxd=4096 #hw.igb.txd=4096 #hw.igb.rx_process_limit=100 # Some useful netisr tunables. See sysctl net.isr #net.isr.defaultqlimit=4096 #net.isr.maxqlimit: 10240 # Bind netisr threads to CPUs #net.isr.bindthreads=1 # Nicer boot logo =) loader_logo="beastie" And finally here is my additions to GENERIC kernel # Just some of them, see also # cat /sys/{i386,amd64,}/conf/NOTES # This one useful only on i386 #options KVA_PAGES=512 # You can play with HZ in environments with high interrupt rate (default is 1000) # 100 is for my notebook to prolong it's battery life #options HZ=100 # Polling is goot on network loads with high packet rates and low-end NICs # NB! Do not enable it if you want more than one netisr thread #options DEVICE_POLLING # Eliminate datacopy on socket read-write # To take advantage with zero copy sockets you should have an MTU of 8K(amd64) # (4k for i386). This req. is only for receiving data. # Read more in man zero_copy_sockets #options ZERO_COPY_SOCKETS # Support TCP sign. Used for IPSec options TCP_SIGNATURE options IPSEC # This ones can be loaded as modules. They described in loader.conf section #options ACCEPT_FILTER_DATA #options ACCEPT_FILTER_HTTP # Adding ipfw, also can be loaded as modules options IPFIREWALL options IPFIREWALL_VERBOSE options IPFIREWALL_VERBOSE_LIMIT=10 options IPFIREWALL_DEFAULT_TO_ACCEPT options IPFIREWALL_FORWARD # Adding kernel NAT options IPFIREWALL_NAT options LIBALIAS # Traffic shaping options DUMMYNET # Divert, i.e. for userspace NAT options IPDIVERT # This is for OpenBSD's pf firewall device pf device pflog # pf's QoS - ALTQ options ALTQ options ALTQ_CBQ # Class Bases Queuing (CBQ) options ALTQ_RED # Random Early Detection (RED) options ALTQ_RIO # RED In/Out options ALTQ_HFSC # Hierarchical Packet Scheduler (HFSC) options ALTQ_PRIQ # Priority Queuing (PRIQ) options ALTQ_NOPCC # Required for SMP build # Pretty console # Manual can be found here http://forums.freebsd.org/showthread.php?t=6134 #options VESA #options SC_PIXEL_MODE # Disable reboot on Ctrl Alt Del #options SC_DISABLE_REBOOT # Change normal|kernel messages color options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_KERNEL_CONS_ATTR=(FG_YELLOW|BG_BLACK) # More scroll space options SC_HISTORY_SIZE=8192 # Adding hardware crypto device device crypto device cryptodev # Useful network interfaces device vlan device tap #Virtual Ethernet driver device gre #IP over IP tunneling device if_bridge #Bridge interface device pfsync #synchronization interface for PF device carp #Common Address Redundancy Protocol device enc #IPsec interface device lagg #Link aggregation interface device stf #IPv4-IPv6 port # Also for my notebook, but may be used with Opteron #device amdtemp # Support for ECMP. More than one route for destination # Works even with default route so one can use it as LB for two ISP # For now code is unstable and panics (panic: rtfree 2) on route deletions. #options RADIX_MPATH # Multicast routing #options MROUTING #options PIM # DTrace options KDTRACE_HOOKS # all architectures - enable general DTrace hooks options DDB_CTF # all architectures - kernel ELF linker loads CTF data #options KDTRACE_FRAME # amd64-only # Adaptive spining in lockmgr (8.x+) # See http://www.mail-archive.com/[email protected]/msg10782.html options ADAPTIVE_LOCKMGRS # UTF-8 in console (9.x+) #options TEKEN_UTF8 #options TEKEN_XTERM # NCQ support # WARNING! all ad[0-9]+ devices will be renamed to ada[0-9]+ #options ATA_CAM # FreeBSD 9+ # Deadlock resolver thread # For additional information see http://www.mail-archive.com/[email protected]/msg18124.html #options DEADLKRES PS. Also most of FreeBSD's limits can be monitored by # vmstat -z and # limits PPS. variety of network counters can be monitored via # netstat -s In FreeBSD-9 netstat's -Q option appeared, try following command to display netisr stats # netstat -Q PPPS. also see # man 7 tuning PPPPS. I wanted to thank FreeBSD community, especially author of nginx - Igor Sysoev, nginx-ru@ and FreeBSD-performance@ mailing lists for providing useful information about FreeBSD tuning. So here is the question: What tunings are you using on yours FreeBSD servers? You can also post your /etc/sysctl.conf, /boot/loader.conf, kernel options, etc with description of its' meaning (do not copy-paste from sysctl -d). Don't forget to specify server type (web, smb, gateway, etc) Let's share experience!

    Read the article

  • pGina with automatic Kerberos ticket and OpenAFS token/ticket

    - by rolands
    I am currently updating our educational Windows lab images from XP to 7, In doing so we are also migrating from Comtarsia to pGina. Unfortunately somewhere in the transition our automation that fetched kerberos and OpenAFS tickets/tokens on login has completely stopped functioning. Basically what used to happen was, using kfw-3.2.2 and the old OpenAFS release (loopback adapter days), either comtarsia would share password or something with the NIM (Network Identity Manager) which would authenticate against the kerberos server gaining a ticket and AFS token needed to access the users file, this was aided by the fact that our ldap database that windows authenticates against is also what kerberos uses to authenticate so usernames/passwords are the same across both services. I have set up all of the tools, albeit newer 64bit versions which seem to have given me less trouble than the previous releases of NIM/OpenAFS/Krb5, as well as setting their configurations back to what we used to use. Unfortunately this seems to be fubar'd in some way, instead all we get now is a OpenAFS token, most likely I assume from the AFScreds tool which operates some kind of integrated login process, although this does not help in getting a kerberos ticket or a afs ticket for which a login box is provided be NIM after the user logs in. Does anyone know IF it is possible to do what we are trying, and if so how? I was considering writing a pGina plugin which would interact with the server itself but this seems slightly like overkill considering that all these applications already exist...

    Read the article

  • How do I host node.js apps with pm2 without running them as root?

    - by jishi
    I have setup pm2 to run a node.js application, and I can successfully start it and it will resurrect upon reboot. However, the pm2 daemon is ran as root, which makes me think that all my node-scripts also runs as root? Even though I added them as a regular user in the system. The log files and stuff is created in the users home dir, /~/.pm2/logs, but the logs are owned by root. when I invoke pm2 startup (which handles the installation of the init.d script etc), it creates /etc/init.d/pm2-init.sh which looks like this: #!/bin/bash # chkconfig: 2345 98 02 # # description: PM2 next gen process manager for Node.js # processname: pm2 # ### BEGIN INIT INFO # Provides: pm2 # Required-Start: # Required-Stop: # Should-Start: # Should-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: PM2 init script # Description: PM2 is the next gen process manager for Node.js ### END INIT INFO NAME=pm2 PM2=/usr/local/lib/node_modules/pm2/bin/pm2 NODE=/usr/local/bin/node export HOME="/root" start() { echo "Starting $NAME" $NODE $PM2 stopAll $NODE $PM2 resurrect } stop() { $NODE $PM2 dump $NODE $PM2 stopAll } restart() { echo "Restarting $NAME" stop start } status() { echo "Status for $NAME:" $NODE $PM2 list RETVAL=$? } case "$1" in start) start ;; stop) stop ;; status) status ;; restart) restart ;; *) echo "Usage: {start|stop|status|restart}" exit 1 ;; esac exit $RETVAL When I dump the processes (which is what it will use when resurrecting the processes), I see mentions of user "USER":"pi" but I don't think that it's actually run as user pi. Any thoughts?

    Read the article

< Previous Page | 777 778 779 780 781 782 783 784 785 786 787 788  | Next Page >