Search Results

Search found 68249 results on 2730 pages for 'sudo work'.

Page 781/2730 | < Previous Page | 777 778 779 780 781 782 783 784 785 786 787 788  | Next Page >

• Wake-on-lan only works so many times

  - by Chance

  I have Wake-on-lan configured on my Windows XP machine so that the computer will wake up from Standby. Waking the computer from Standby via network traffic seems to work a certain number of times, say 4 or 5, then it stops working. If I restart the computer it seems to reset this behavior so that I can use WOL a few more times before it starts working. I use the command "wol" on my other, Linux machine with the appropriate IP address and MAC address of the card. I looked at the network card to see if it had different lights when WOL worked and when it didn't. When it has a solid amber light where the ethernet cable connects, WOL seems to work. When it has a flashing amber light, WOL does not. It seems that the system seems to almost "shut off" the card when it falls to sleep, but I don't know if this is a function of time or number of standby/wakeups. I have a 3Com 3c920 network card. If I look at the properties in Device Manager, I have "Allow this Device to bring the Computer out of Standby" checked. In the Advanced tab I have anything related to RWU (Remote Wake Up) enabled. I also believe I have the appropriate settings in BIOS related to Remote Wake-Up and I have tried both S1 and S3 power configurations in the BIOS. Intuitively, I would think I would uncheck "Allow the Computer to turn off this device to save power", but doing so disables the "Allow this Device to bring the Computer out of Standby" option. Does anyone know what is happening here or if there is a way to fix it? I have an integrated network card; would getting one that goes into a slot be better? I am running Windows XP on a Dell Optiplex GX240 with a 3Com 3c920 network card.

  Read the article

• Slow browsing through IE on Windows Server 2012

  - by Volodymyr

  We've run into strange issue on the freshly installed servers. H/W: IBM server X3550 M4 7914; OS: Windows Server 2012 Std. Then we try to browse on the servers thru IE, not all sites are opened or it takes too long time to open the page, i.e. very few of them can be opened. Local FW are disabled. Servers are in a new subnet and traffic is allowed for it. VLAN is configured properly Another Windows Server 2012 host is running OK and Internet access works fine, but it is VM running on Hyper-V 2012. No proxy is used on the network. At the same time, if one tries to establish telnet session to any site on 80/443 ports - it does work. Google works as well. I've tried to configure single Qlogic adapter to check if the issue remains - it does. Teaming is configured with the means of QLogic, not by built-in functionality. IE Enhanced Security is disabled. IE settings were reset, more than once. Why would certain sites work while others not - Idk. I also tried to disable ecncapability and restart server - no luck netsh int tcp set global ecncapability=disabled Any thoughts? UPD1 VMQ is disabled. Servers are not running Hyper-V. UPD2 Servers were rebuilt from scratch, got a mail a few mins ago. Issue still remains. Teaming is now configured with the means of Windows Server 2012.

  Read the article

• How can I move linked Word/Excel files without breaking the links under Windows 7?

  - by DOUG NEEDHAM

  I currently operate under Windows XP and have multiple links between my Word and Excel files. I have to upgrade to Windows 7. When the .doc and .xls files are converted to .docm and .xlsm, respectively, the links no longer work. The Word document is still attempting to point back to the old .xls file rather than the new file. Also, creating new links between Word and Excel within Office 2010 doesn't seem to work. I create the new link, switch it from "Auto" to "Manual" and everything works fine. But when I copy the files to another folder, the Word document is still trying to link to the file in the previous folder rather than the new folder. This always worked in Windows XP. I've been using linked Word/Excel documents for 10+ years and have never really had a problem. I'm very careful to maintain Word and Excel filenames when moving the files to a new folder. The process has always been to 1.) move the files, 2.) update the links, 3.) rename the files, and 4.) update the links again. It's my understanding that under Windows XP, links between Word and Excel are relative. But under Windows 7 (and Office 2010?), those same links become fixed.

  Read the article

• convert a pdf/djvu file to png's under Linux how? [closed]

  - by user66732

  Imagemagick doesn't work (Fedora 14) on one PDF file: $ convert -density 300 INPUT.PDF out.png Error: /ioerror in --showpage-- Operand stack: 1 true Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1878 1 3 %oparray_pop 1877 1 3 %oparray_pop 1861 1 3 %oparray_pop --nostringval-- --nostringval-- 141 1 319 --nostringval-- %for_pos_int_continue --nostringval-- --nostringval-- 1761 0 9 %oparray_pop --nostringval-- --nostringval-- Dictionary stack: --dict:1157/1684(ro)(G)-- --dict:1/20(G)-- --dict:75/200(L)-- --dict:75/200(L)-- --dict:108/127(ro)(G)-- --dict:288/300(ro)(G)-- --dict:22/25(L)-- --dict:6/8(L)-- --dict:22/40(L)-- Current allocation mode is local Last OS error: 27 GPL Ghostscript 8.71: Unrecoverable error, exit code 1 convert: Postscript delegate failed INPUT.PDF': @ error/pdf.c/ReadPDFImage/645.<br> convert: missing an image filenameout.png' @ error/convert.c/ConvertImageCommand/2953. $ And it doesn't work on a djvu file: $ convert -density 300 INPUT.DJVU out.png convert: no decode delegate for this image format INPUT.DJVU' @ error/constitute.c/ReadImage/532.<br> convert: missing an image filenameout.png' @ error/convert.c/ConvertImageCommand/2953. $ an extra: the output filenames. out-0.png out-1.png ... out-9.png out-10.png out-11.png .. out-123.png out-124.png is there a way to be like this?: out-000.png out-001.png ... out-009.png out-010.png out-011.png .. out-123.png out-124.png because they would be in wrong order: out-0.png out-1.png out-10.png out-11.png out-123.png out-124.png out-9.png thank you :\

  Read the article

• why Thinkpad T410s intermittent keyboard death?

  - by patrickmdnet

  I have a Thinkpad T410s running Windows 7 64-bit. I have had it for three months. It has the latest BIOS (1.41) and trackpad drivers. In the last week I have started to notice that the keyboard intermittently stops working. Specifically, keystrokes have no effect, including Fn-F12 (shutdown) and Ctrl-Alt-Del. The LED on the capslock key does not turn on or off. Whatever state the lighted keys (e.g. mute) were in remains. The trackpad and trackpoint work properly, and I can close apps and properly shut down the machine. When I attach a USB keyboard it is recognized, but no keys work. If I run the Lenovo keyboard test, all the keys register properly and the caps lock light works again. When I quit the test app, the caps lock light stops working. If I hit Fn-F12 while the keyboard test is running, it goes into hibernation. When the machine comes back from hibernation, once I exit the keyboard test I again cannot do any input on the keyboard. I'm pretty convinced there is a software or driver problem. I never saw this the first three months I had the laptop. I do not recall installing anything recently. I am sure I've received some Windows security updates. I tried using wired networking instead of wireless - no difference. There doesn't appear to be any inciting event; it usually happens when I am working over ssh. I switched from rxvt+ssh to Putty and the problem still occurs. Any ideas?

  Read the article

• Running Visual Studio 2010 in a University Campus

  - by Woondows

  We have just installed Windows 7 Enterprise x64 in one of our computer labs being used by students for programming. However, when we installed Visual Studio 2010 Ultimate on the machines, we found that to even launch the application (devenv.exe), required the student to enter the administrator password (the usual UAC prompt). Of course, we could just turn off UAC, but that would defeat the purpose of having it in Windows 7. On the other hand, we cannot really give the students local administrator privilege, as we are concerned that they will do some malicious stuff on the computers. Previously when we used Windows XP Professional running Visual Studio 2005, we had no problems. Kindly advise if there's any workaround for this. EDIT: Thanks for the answer guys. Mayank, your links may work for Visual Studio .Net, but it doesn't seem to work for Visual Studio 2010. Ryan, Tieson, I'm intrigued that you guys managed to get it working easily. FYI I don't manage the Group Policies, but I can get them changed if necessary. Any particular GP that I should be looking at? Suggestions to how to troubleshoot further why UAC is being invoked? At least now I know for sure that this is not supposed to be the default behaviour for Visual Studio 2010 so I'm going to keep digging for a solution. Will try running Procmon and see if i can find something..

  Read the article

• Multidimensional data table?

  - by ShreevatsaR

  [Apologies if this sort of question is off-topic for SuperUser. Please redirect to the right place if so.] There is a 3-dimensional array of values. (That is, instead of a table/2-dimensional array with values in a grid, the values can be thought of in a cube instead.) Is there a way to display this "cube" interactively, ideally on a webpage? Specifically, given the data, it would work something like this: the user selects two of the 3 variables. He then sees a "stack" of tables, one for each value of the third variable (cross-sections, in other words). By selecting the appropriate table from the stack, he can see the (i,j,k) value he wants. The "technology" for displaying such a thing (stacked tables, rotation, etc.) already exists, so this seems the sort of thing that someone ought to have written already. To be clear: I don't need sophisticated graphics necessarily, just the ability to select from cross-sections of variables. But I have no experience with (say, for displaying on a webpage) what web gadgets exist, so I'm clueless how to even search for one. (Google searches like "multidimensional data visualization" didn't throw up anything useful. Google Spreadsheets can do a few kinds of charts which can be embedded on a webpage, but I cannot tell if this is one of them.) [I can imagine how it ought to work for higher dimensions. For four-dimensions, instead of selecting just a stack, you'd first select an (i,j) from an "outer table", which would show all (k,l) values for that (i,j). For higher dimensions, inductively: you select (i,j), and then repeat what you'd do with 2 fewer dimensions.] So has this been written? Is this easy to write? Where ought one to look for such a thing?

  Read the article

• why is Mac OSX Lion losing login/network credentials?

  - by Larry Kyrala

  (moved from stackoverflow...) Symptoms So at work we have OSX 10.7.3 installed and every once in a while I will see the following behaviors: 1) if the screen is locked, then multiple tries of the same user/pass are not accepted. 2) if the screen is unlocked, then opening a new bash term may yield prompts such as: `I have no name$` or lkyrala$ ssh lkyrala@ah-lkyrala2u You don't exist, go away! Even when our macs are working normally, everyone here has to login twice. The first time after boot always fails, but the second time (with the same password, not changing anything, just pressing enter again) succeeds. Weird? Workarounds There are some workarounds that resolve the immediate problem, but don't prevent it from happening again: a) wait (maybe an hour or two) and the problems sometimes go away by themselves. b) kill 'opendirectoryd' and let it restart. (from https://discussions.apple.com/thread/3663559) c) hold the power button to reset the computer Discussion Now, the evidence above points me to something screwy with opendirectory and login credentials. Some other people report having these login problems, but it's hard to determine where the actual problem is (Mac, or network environment?). I should add that most of the network are Windows machines, but we have quite a few Macs and Linux machines as well, but I'm not sure of the details of how the network auth is mapped from various domains to others... all I know is that our network credentials work in Windows domains as well as mac and linux logins -- so something is connecting separate systems, or using the same global auth system.

  Read the article

• Access 2007: How can I make this EXPRESSION less complex?

  - by Mike

  Access is telling me that my new expression is to complex. It used to work when we had 10 service levels, but now we have 19! Great! My expression is checking the COST of our services in the [PriceCharged] field and then assigning the appropriate HOURS [Servicelevel] when I perform a calculation to work out how much REVENUE each colleague has made when working for a client. The [EstimatedTime] field stores the actual hours each colleague has worked. [EstimatedTime]/[ServiceLevel]*[PriceCharged] Great. Below is the breakdown of my COST to HOURS expression. I've put them on different lines to make it easier to read - please do not be put off by the length of this post, it's all the same info in the end. Many thanks,Mike ServiceLevel: IIf([pricecharged]=100(COST),6(HOURS), IIf([pricecharged]=200 Or [pricecharged]=210,12.5, IIf([pricecharged]=300,19, IIf([pricecharged]=400 Or [pricecharged]=410,25, IIf([pricecharged]=500,31, IIf([pricecharged]=600,37.5, IIf([pricecharged]=700,43, IIf([pricecharged]=800 Or [pricecharged]=810,50, IIf([pricecharged]=900,56, IIf([pricecharged]=1000,62.5, IIf([pricecharged]=1100,69, IIf([pricecharged]=1200 Or [pricecharged]=1210,75, IIf([pricecharged]=1300 Or [pricecharged]=1310,100, IIf([pricecharged]=1400,125, IIf([pricecharged]=1500,150, IIf([pricecharged]=1600,175, IIf([pricecharged]=1700,200, IIf([pricecharged]=1800,225, IIf([pricecharged]=1900,250,0)))))))))))))))))))

  Read the article

• Inheriting file ownership on linux

  - by John Hunt

  We have an ongoing problem here at work. We have a lot of websites set up on shared hosts, our cms writes many files to these sites and allows users of the sites to upload files etc.. The problem is that when a user uploads a file on the site the owner of that file becomes the webserver and therefore prevents us being able to change permissions etc via FTP. There are a few work arounds, but really what we need is a way to set a sticky owner if that's possible on new files and directories that are created on the server. Eg, rather than php writing the file as user apache it takes on the owner of the parent directory. I'm not sure if this is possible (I've never seen it done.) Any ideas? We're obviously not going to get a login for apache to the server, and I doubt we could get into the apache group either. Perhaps we need a way of allowing apache to set at least the group of a file, that way we could set the group to our ftp user in php and set 664 and 775 for any files that are written? Cheers, John.

  Read the article

• Port forwarding with multiple IP's

  - by Jon

  I work at a company which uses a Fortigate 60 router, something I'm not really familiar with. Everything worked fine with it until a week ago when Comcast came in and replaced our modem. It seemed as though the process went smoothly - our connection came back up and our static IP remained the same. However, none of our port forwarding is working. What has me confused is the Comcast modem apparently has two IP addresses. The WAN2 interface for it in the Fortigate router is set to 10.1.10.10. However, all of our port forwarding settings are set to an external IP address of 10.1.10.50. Now this setup used to work fine, so something with the Comcast modem must have changed. How can I find out what? I tried setting a computer to a local IP of 10.1.10.15 so I could open up the web interface for the modem, but I can't even ping 10.1.10.10 when I do that. Any ideas? Thanks!

  Read the article

• Why is IIS 7.5 seeing some requests as HTTP/1.0?

  - by Zhaph - Ben Duguid

  While trying to work out why Static File Compression wasn't working on one of our IIS servers, the error was coming back as "NO_COMPRESSION_10" which translates to: Server not configured to compress 1.0 requests Looking at the requests in Fiddler, I can see that I'm requesting HTTP 1.1, but everything is being sent back as HTTP 1.0: Request (from chrome, captured via Fiddler): GET /css/reset.css HTTP/1.1 Host: [-----].com Connection: keep-alive Cache-Control: max-age=0 If-Modified-Since: Tue, 16 Oct 2012 15:04:34 GMT User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.95 Safari/537.11 Accept: text/css,*/*;q=0.1 Referer: http://[-----].com/ Accept-Encoding: gzip,deflate,sdch Accept-Language: en-GB,en;q=0.8,en-US;q=0.6 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 Response from IIS: HTTP/1.0 200 OK Cache-Control: no-cache, no-store Pragma: no-cache Content-Type: text/html; charset=utf-8 Expires: -1 Server: Microsoft-IIS/7.5 X-AspNet-Version: 4.0.30319 X-Powered-By: ASP.NET Date: Tue, 11 Dec 2012 11:57:03 GMT Connection: close Content-Length: 108837 Other servers with the same host that I'm running this site on all respond with HTTP/1.1. How can I persuade IIS to respond with HTTP/1.1 rather than HTTP/1.0? Edit to add: Digging deeper, I can see that some responses from the server are indeed being returned compressed, so I guess really I'm trying to work out why talking to this particular server from our office seems to result in it seeing 1.0 requests, while other servers at the same co-loc don't?

  Read the article

• LDAP groups not applying to filesystem permissions

  - by BeepDog

  System is ArchLinux, and I'm using nss-pam-ldapd (0.8.13-4) to connect myself to ldap. I've got my users and some groups in LDAP: [root@kain tmp]# getent group <localgroups snipped> dkowis:*:10000: mp3s:*:15000:rkowis,dkowis music:*:15002:rkowis,dkowis video:*:15003:transmission,rkowis,dkowis,sickbeard software:*:15004:rkowis,dkowis pictures:*:15005:rkowis,dkowis budget:*:15006:rkowis,dkowis rkowis:*:10001: And I have some directories that are setgid video so that the video group stays, and they're configured g=rwx so that members of the video group can write to them: [root@kain video]# ls -ld /srv/video drwxrwxr-x 8 root video 208 Oct 19 20:49 /srv/video However, members of that group, say dkowis cannot write into that directory: [root@kain video]# groups dkowis mp3s music video software pictures dkowis Total number of groups that dkowis is in is like 7, I redacted a few here. [dkowis@kain wat]$ cd /srv/video [dkowis@kain video]$ touch something touch: cannot touch 'something': Permission denied [dkowis@kain video]$ groups dkowis mp3s music video software pictures I'm at a loss as to why my groups show up in getent groups, but my filesystem permissions are not being respected. I've tried making a new directory in /tmp and setting it's group permissions to rwx, and then trying to write a file in there, it doesn't work. The only time it does work is if I open it wide up allowing o=rwx. That's obviously not what I want, and I'm not able to figure out what my missing piece is. Thanks in advance.

  Read the article

• Virtual IPv6 Network between VirtualBox VMs

  - by Ben

  I'm trying to create a virtual IPv6 network as a test environment. I have 5 VirtualBox VMs (Ubuntu Server) with network adapters using host-only networking. You can imagine them being connected in series and every machine connects 2 subnets. I want to ping the last machine from the first one: On: 2001:db8:aaaa::100 I want to ping 2001:db8:dddd::101 (Note: there is no cccc network in between) Only static configuration and routes are used: /etc/network/interfaces auto eth0 iface eth0 inet6 static address 2001:db8:aaaa::100 netmask 64 /etc/network/interfaces auto eth0 iface eth0 inet6 static address 2001:db8:aaaa::101 netmask 64 auto eth1 iface eth1 inet6 static address 2001:db8:bbbb::100 netmask 64 up ip -6 route add 2001:db8:dddd::/64 via 2001:db8:bbbb::101 dev eth1 down ip -6 route del 2001:db8:dddd::/64 via 2001:db8:bbbb::101 dev eth1 I thought there might be some automatic route discovery going on. Anyway, ping6 2001:db8:dddd::100 will not work from aaaa::100 When I add the route: ip -6 route add 2001:db8:dddd::/64 via 2001:db8:aaaa::101 it will work. But the next interface in the same network dddd::101 is not reachable. How could that be? There is a machine with an interface bbbb::101 and another dddd::100 and I can ping the latter one, but the machine connected to it, dddd::101 not?? I also have also turned on forwarding. Any ideas?

  Read the article

• Completed downloads freeze Windows

  - by Ben Hooper

  The Issue Shortly after a file download via Google Chrome for Windows completes, the download will get stuck on "0 seconds left" and all other programs (except Google Chrome, for some reason, but browsing will not work) completely freezes into Windows' infamous "Not Responding" state, affecting Explorer particularly badly. Eventually, the programs will recover themselves but they will recover significantly faster if you cancel the file download, relative to how quickly you react. Performing the exact same operation immediately after cancelling the download usually works without issue. This issue occurs when with any file type (.ZIP, .MSI, .MSG, .PNG, .URL, etc) of any size from any source (Dropbox, SourceForge, Imgur, even tiny and locally-generated BLObs created by my own Chrome extension, etc) to any location.   Potential Causes As this issue is so inconsistent, I haven't been able to prove whether the issue is Chrome-specific or being caused by my system or my Chrome configuration but it's happening on both my work and home PCs. I originally suspected that this issue was being caused by security software scanning completed downloads for threats but I'm not as confident in that theory anymore as the issue persisted even after changing my security software from ESET NOD32 and Malwarebytes Anti-Malware Pro to ESET Endpoint to Microsoft Security Essentials.   System Information (of both PCs) Windows version: 7 Service Pack 1 64-bit Google Chrome version: 30.0.1599.101 (but has been happening for a long time)   Screenshots

  Read the article

• How to encourage Windows administrators to pick up scripting

  - by icelava

  When i worked as an administrator in my first job, I was frustrated our administration processes with Windows servers were a series of point-and-clicks; we could never match the level of efficiency with the Unix servers which had a group of shell scripts to automate a lot of the work. I soon read about WSH and ADSI and wasted no time learning just how much automation I was able to achieve with scripting. There was a huge problem though - almost none of my Windows colleagues were really interested in learning scripting. They seemed happy with the manually mouse-clicking chores and were never excited at the prospect of using scripts to do the work on their behalf. I struggled to convince them to pick up scripting skills despite the evident increases in efficiency. I left that job in pursuit of a full-time software development career thereafter. Almost a decade on working in various environments and different customers, I still encounter Windows administrators mainly possessing this general "mood" where they would avoid scripting as much as possible. Despite the increasing level of accessibility Windows server technologies are opening up for scripting and automation. I am almost certain the majority of administrators are administrators precisely because they absolutely hate performing any kind of programming duties. What are some means to encourage and motivate administrators that scripting can really help them in the long run?

  Read the article

• How do I change Firefox's user agent via about:config?

  - by wahle509

  My work has blocked Internet access with Firefox. I know how to change the value of “general.useragent.extra.firefox” through about:config, but when I try to change it to IE, I still can’t access any website. I have Firefox 3.5.6 and Internet Explorer 7 installed on my desktop. Now, would I have to use the user agent that Internet Explorer 7 is currently using on my computer or can I use any Internet Explorer user agent? The user agent that Internet Explorer 7 is using right now is: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; InfoPath.2; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022). Do I just copy that and use it as the user agent in Firefox? How can I make this work?

  Read the article

• How can I remove all drivers and other files related to a USB Mass Storage device?

  - by Bob

  I have a flash drive here that does not work on one OS on computer - let's call it the desktop Windows 7. It works fine on another computer - laptop Windows 7. It also works fine on Windows 8 on the same desktop computer. Other flash drives work fine under desktop Windows 7. So not a hardware issue, not a generic USB Mass Storage driver issue. It's something specific to this drive. On desktop Windows 7, I can connect the drive but no volume comes up under Windows Explorer. Ditto for Disk Management. With diskpart, loading hangs until I unplug the drive, if I replug it and try list disk it hangs again. If I unplug the drive at this point, list disk prints out all attached drives - including the just removed flash drive. The drive consistently appears under Device Manager, but uninstalling the drivers, restarting and reinstalling the drivers (by inserting the drive) only works for the first insertion. After that it fails again. I get the feeling that the driver files are not actually removed, and are corrupted, meaning every reinstall it's the same corrupted drivers being installed. Is there any way to remove these drivers completely? Or perhaps some other setting Windows 7 retains? Formatting the drive through another computer/OS does not help. I've also tried a complete wipe and rebuild of the MBR and single partition. The allocation unit size makes no difference; neither does a NTFS format. This is a relatively small matter, and I would not like to reinstall the entire OS!

  Read the article

• Juniper NetScreen NS-5GT traffic monitoring

  - by blah

  I've done casual research into the subject and am truly dismayed at the lack of compatible tools for such a simple task. Maybe someone can provide assistance. We have a NetScreen NS-5GT in the office. I need to be able to get a glance of current traffic per endpoint -- I think the equivalent of 'get sessions' with byte counts/rates. I don't care about bars, graphs, and reports. Something as simple as a classic software firewall display would be perfect. I can't shell out money on something real like SolarWinds products, so a free solution is essential. I'm willing to do a little work but refuse to program something from scratch. It's not prudent right now for me to install a hub or otherwise mess around physically. There must be something out there I can use, maybe in combination. I don't believe I'm asking too much. Specific answers only please, e.g. monitoring software you know will actually work with this antiquated device. I've read about general approaches to the broader problem dozens of times already.

  Read the article

• Serve a specific set of error pages for different subdirectories

  - by navitronic

  I am currently trying to setup 2 different sets of Error documents for separate folders within a website. I have 2 folders within the root of a site: demo/ live/ Any requests that return 404's or 403's within the demo folder needs to load one set of pages for the Apache errordocuments, eg. ErrorDocument 404 /statuses/demo-404.html ErrorDocument 403 /statuses/demo-403.html And the live needs to go to similarly name files. ErrorDocument 404 /statuses/live-404.html ErrorDocument 403 /statuses/live-403.html So far I have tried placing an .htaccess file in both directories with the ErrorDocument directives setup pointing to the specific files, the 404 works fine and references the correct page. However, the 403s do not work and revert to the server default when trying to access forbidden folders within the demo directory, the logs indicate the following: [Wed Jun 16 04:47:44 2010] [crit] [client 115.64.131.144] (13)Permission denied: /home/abstract/public_html/demo/xxx/.htaccess pcfg_openfile: unable to check htaccess file, ensure it is readable Is this correct? Would apache revert to default because it is trying to look for the htaccess in a folder it doesn't have permission in? Why wouldn't it work it's way back through the folder tree? Can I make it do this?

  Read the article

• Mount an VHD on Mac OS X

  - by janm

  Is it possible (how) to mount an VHD file created by Windows 7 in OS X? I found some information about how to do this on linux. There is a fuse fs "vdfuse" which uses virtualbox libs to mount filesystems supported by virtualbox. However I was unable to compile the package on osx because nearly all headers are missing and I doubt that it would work anyway... EDIT #2: Okay I got my hands dirty and finally compiled vdfuse (http://forums.virtualbox.org/viewtopic.php?f=26&t=33355&start=0) on osx. As a starting point I used macfuse (http://code.google.com/p/macfuse/) and looked at the example file systems. This led me to the following build script infile=vdfuse.c outfile=vdfuse incdir="your/path/to/vbox/headers" INSTALL_DIR="/Applications/VirtualBox.app/Contents/MacOS" CFLAGS="-pipe" gcc -arch i386 "${infile}" \ "${INSTALL_DIR}"/VBoxDD.dylib \ "${INSTALL_DIR}"/VBoxDDU.dylib \ "${INSTALL_DIR}"/VBoxVMM.dylib \ "${INSTALL_DIR}"/VBoxRT.dylib \ "${INSTALL_DIR}"/VBoxDD2.dylib \ "${INSTALL_DIR}"/VBoxREM.dylib \ -o "${outfile}" \ -I"${incdir}" -I"/usr/local/include/fuse" \ -Wl,-rpath,"${INSTALL_DIR}" \ -lfuse_ino64 \ -Wall ${CFLAGS} You actually don't need to compile VirtualBox on your machine, just install a recent version of VirtualBox. So now I can partially mount vhds. The separate partitions appear as block files Partition1, Partition2, ... on my mount point. However Mac OS X does not include a loopback file system and macfuse's loopback fs does not work with block files, so we need a loopback fs to mount the blockfiles as actual partitions.

  Read the article

• ADUC Exchange tabs - Windows 7 & Exchange 2003

  - by John Gardeniers

  I have the admin tools install on a Win 7 64 bit machine but would like to see the Exchange tabs in ADUC. Googling shows this is a popular request and the most common solution (and the only one which appears to work to all) is to install Exchange Server Management for Vista using esmvista.msi /q. That may well have worked on beta versions of Win 7 but is definitely not working with my OEM copy of Win 7. Can this perhaps be made to work by installing from an Exchange 2007 CD (which I don't have at this time), bearing in mind that we have Exchange 2003 only? Can someone please offer a solution that works? I figure some of you must have solved this by now. Edit: I don't know if this is relevant or not but the Win 7 machine is also running Office 2010 Pro. About the bounty I had intended to award the bounty to gWaldo for having taken the extra steps to try to help me with this issue. However, as I was about to do so my screen started scrolling and I actually clicked on the answer posted by natxo asenjo, who's answer offended me, without realising it. Perhaps if I wasn't rushing I might have noticed but that's now history.

  Read the article

• XenServer 5.5 running WHS.. trying to add local or network printer/scanner/copier

  - by ProstheticHead

  Hi guys. Just wondering if anyone has prior experience in sharing a multifunction printer across a (mostly windows) network? My situation at the minute is complicated.. I DID have the printer attached directly to a Windows Home Server box and was able to scan to a share and print across the network from my other computers. Compatibility problems have forced me to virtualize WHS on XenServer 5.5... This is actually quite useful because I can now run other things on the same box, but the problem is that now WHS doesn't get direct hardware access so it doesn't see a USB attached PSC... Grrrr! So now I have a choice to make. I've read somewhere that I can buy an add in PCI USB controller and somehow set up a passthrough to one VM at a time. To me, this sound complicated but if it's likely to work reliably I'd prefer this method. I've read about another approach, which I'm not sure about either, but I guess sounds plausible. A Network USB server, (NOT a print server) that can somehow make a USB port accessible across a network. My worry here is that it likely needs some kind of 3rd party software to work.. so not ideal. If there are any other methods you can suggest I'd be happy to hear them... I need your help guys. I'm also in the market for a PCI express SATA controller, nothing flashy, just need up to 8 ports, JBOD and 100% compatability.. Any suggestions? Regards Kevin

  Read the article

• Network structure --> Server 2k8r2 <--> Livebox <--> Router <--> Other PCs

  - by Yusuf

  I have a Livebox connection to the Internet and I have set up my network as follows: - Livebox <--> Win2k8R2 Server - Livebox <--> Netgear N150 Router - Router <--> Other PCs Therefore, in my LAN, - the Livebox has IP address 192.168.1.1, - the Router 192.168.1.12 (when accessed from the Livebox or the server), - the Router 10.0.0.1 (when accessed from the PCs connected to the Router), - the server 192.168.1.2, - the PCs 10.0.0.x I was using a previous configuration, which was as follows: - Livebox <--> Netgear N150 Router - Router <--> Win2k8R2 Server - Router <--> Other PCs Everything was simple, and I just had to forward all ports for incoming connection on the Livebox to the Router, and then forward the specific ports to the Server as needed (it must be however noted that any server I use is found on the Win2k8R2 server itself). In this previous configuration, the IP addresses were as follows: - Livebox 192.168.1.1 - Router 192.168.1.12 (when seen from Livebox) - Router 10.0.0.1 (when seen from server & PCs connected to it) - Server 10.0.0.2 - PCs 10.0.0.x So now of course, my port-forwarding does not work anymore since the server is not connected (directly) to the Router. What I would like to know is how do I configure the Livebox and Router to still have the features like before? From what I understand of networks (which is very limited, btw), I see these options: Make the router assign IPs like 192.168.1.x (but then I want the forwarding to be done from the router itself, is it possible?) The forwarding on the router to the server uses IP address 10.0.0.2. I could change it to 192.168.1.2 (Is that even possible, does it work?) Forward all ports from the Livebox itself to the server, and then manage them there (Is software-based port-forwarding as secure as hardware-based?)

  Read the article

• Time Machine vs Source Control?

  - by Blub

  Finally got convinced to start using some kind of version control for my code instead of zipping down a copy of the project at the end of each day. Downloaded Tortoise SVN and used it to create a repository localy on my hdd. I've been using it for 2 days now but I have to say that using it is actually more hassle than just copying the project manually in explorer. Sure, you only store incremental changes but with the cheap disks of today I can't really say that's an argument when you only have small projects. I haven't realy found a quick way to browse the older versions of my files eighter. What I want is an infinite undo that is completely transparent while I code, if I save the file I want a backup. I don't want to check out, check in and don't even get me started on moving files. I haven't tried Time Machine for OS X but it looks like it's exactly what I'm looking for. Does such a program exist for windows? Preferably free and with some kind of tagging-system so I can tag a timestamp when the project is working etc. Maybe should add that I mostly work alone on a single computer. Update: Some of you asked why I want backup. Since I work alone it's mostly to allow me to quickly hack up a solution without worrying that something will screw up.

  Read the article

< Previous Page | 777 778 779 780 781 782 783 784 785 786 787 788  | Next Page >