Search Results

Search found 25391 results on 1016 pages for 'update notification'.

Page 782/1016 | < Previous Page | 778 779 780 781 782 783 784 785 786 787 788 789  | Next Page >

  • Juniper router dropping pings to external interface

    - by Alexander Garden
    My organization has a Juniper SSG20-WLAN that routes our traffic to the outside world. We've been having intermittent problems with our internet connection so I wrote up a Python script to ping the internal interface of the router, the external interface, a couple of our internal servers, the ISP router our router talks to, their upstream provider, and Google and Yahoo for good measure. It does that about every minute. What I have found is that when our internet goes out, our Juniper router ceases responding to pings on the external interface. Everything past that is, of course, unreachable. The internal interface and our internal servers continue to echo back without interruption. None of the counters indicate dropped packets of any type. They all look normal. The logs complain about VIP servers being unavailable but otherwise nothing indicative of network issues. My questions are these: Does this exonerate our ISP? Or, contrawise, might a problem with the connection be causing the external interface to go down? Is there somewhere else in the SSG20, beside the system log and counters, that might help me track down info on the problem? UPDATE: Turned out that one of the switches between my monitoring box and the router was a router itself, and occasionally diverting from the gateway to itself. Kudos to those who made suggestions along those lines. Not really sure which answer to mark as accepted, as it was really stuff in the comments that turned out to be right. Thanks for the suggestions.

    Read the article

  • How to multiseat with HW 3d accel on CentOS 6.3 Final?

    - by user35070
    I would like to setup a multiseat configuration on CentOS 6.3 (two video cards, two keyboards, two mice, two monitors) and have hardware accelerated 3D on both monitors. 3D HW acceleration rules out Xephyr. I saw somewhere that recent versions of GDM (3.3 and newer?) don't support multiseat, so do I have to install KDM to make this work? If I just create a duplicate section with new device identifiers in my xorg.conf file, will this 'just work'? Using different ports on the same video card and separate keyboards, mice, and displays, the result was a desktop which spanned both monitors with both keyboards and mice acting as the same input in the GUI. I will power down and put in the new video card and report on the results soon. Both video cards are nvidia. UPDATE after putting in another NVIDIA video card, default behavior (before changing xorg.conf) is that one screen works normally, and both mice and keyboards are connected to it. Changing xorg.conf and the display manager to KDM and following the directions here https://help.ubuntu.com/community/MultiseatX#Ubuntu_10.04_.28Lucid.29 , I have 2 mirrored screens connected to separate video cards, DRI enabled, and 2 mice both connected to the same pointer. Keyboards don't do anything, however, I probably just need to fix a setting in xorg.conf I would still like to get multiseat functionality, eg. separate screens with separate input devices I have verified that the separate X processes are running (see page above) using 'ps aux | grepX [01]'

    Read the article

  • Task Scheduler Crashing MMC

    - by Valrok
    I've been getting errors whenever I try to run the task scheduler for Windows 2008 R2. Each time that I've tried running it, the task scheduler will crash and report the following: Problem signature: Problem Event Name: CLR20r3 Problem Signature 01: mmc.exe Problem Signature 02: 6.1.7600.16385 Problem Signature 03: 4a5bc808 Problem Signature 04: System.Windows.Forms Problem Signature 05: 2.0.0.0 Problem Signature 06: 50c29e85 Problem Signature 07: 151f Problem Signature 08: 18 Problem Signature 09: Exception OS Version: 6.1.7601.2.1.0.16.7 Locale ID: 1033 I've been looking online but so far I keep finding mixed results on what could be the fix for this and was wondering if anyone here has ever ran into this issue before. I read that this issue could be because of Security Update for Microsoft Windows (KB2449742) and that by uninstalling it I would be able to fix this issue, however I was not able to locate this anywhere in the server. Here's the link if interested Patch wise, everything is up to date. Also, I tried running hotfix KB2688730 to see if that would work after doing some research online, however the hotfix is not applicable to the computer. If anyone could provide some information on how to fix this and get the task scheduler running again it would be extremely helpful!

    Read the article

  • Setup site folders on Apache and PHP

    - by Cobus Kruger
    I'm trying to set up my first Apache server on my Windows PC at home and I have real trouble finding out which configuration settings go where. I downloaded and installed XAMPP which seemed to get everything nicely set up and can see a working website on http://localhost. So far so good. The point of this is to develop a website of course, and to make my life easier (irony?), I wanted to let the web site root point to my Eclipse project folder. So I opened httpd-vhosts.conf, uncommented a VirtualHost block and changed its DocumentRoot to my local path. Now when I try to load http://localhost I get a 403 (Access denied) error. So where do I configure permissions for my folder? And is that all I need to let my site run from the folder specified or am I going to have to clear another hurdle? Update: I tried to simplify things a little, so I reinstalled XAMPP and got back to a working http://localhost. Then I confirmed that httpd-vhosts.conf is included in httpd.conf and made the following changes to httpd-vhosts.conf: Uncommented the line NameVirtualHost *:80 Added a virtual host shown below. Restarted Apache and saw the expected page on http://localhost <VirtualHost *:80> DocumentRoot "C:/xampp/htdocs/" ServerName localhost ErrorLog "logs/dummy-host2.localhost-error.log" CustomLog "logs/dummy-host2.localhost-access.log" combined </VirtualHost> I then created a new folder named C:\testweb, added an index.html file and changed the DocumentRoot line shown above. For all intents and purposes I would then expect the two configurations to be equivalent. But this setup gives me an error 403. Even though the C:\testweb folder already had the same permissions as the C:\xampp\htdocs folder, I then went further and gave the Everyone group full control of C:\testweb and got exactly the same problem. So what did I miss?

    Read the article

  • mysql startup, shtudown and logging on osx

    - by Joelio
    Hi, I am trying to troubleshoot some mysql problems (I have a table I cant seem to delete or drop, it hangs forever) I have 10.5.8 osx, I dont remember how/if I installed mysql, here is what I know: it automatically starts on boot the process looks like this: /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/var --pid-file=/usr/local/mysql/var/Joels-New-Pro.local.pid _mysql 96 0.0 0.0 75884 684 ?? Ss Sat06PM 0:00.02 /bin/sh /usr/local/mysql/bin/mysqld_safe when I run: /usr/local/mysql/libexec/mysqld --verbose --help it says: /usr/local/mysql/libexec/mysqld Ver 5.0.45 for apple-darwin9.1.0 on i686 (Source distribution) it seems to use my.cnf from /etc/my.cnf Now here are my questions: I dont see anything in the startupitems that remotely looks like mysql ls /Library/StartupItems/ BRESINKx86Monitoring ChmodBPF HP IO HP Trap Monitor Parallels ParallelsTransporter 1.) So how does it startup automatically? 2.) How do I start & stop this type of installation? Also, looking at the config, the logs have no values: /usr/local/mysql/libexec/mysqld --verbose --help|grep '^log' log (No default value) log-bin (No default value) log-bin-index (No default value) log-bin-trust-function-creators FALSE log-bin-trust-routine-creators FALSE log-error log-isam myisam.log log-queries-not-using-indexes FALSE log-short-format FALSE log-slave-updates FALSE log-slow-admin-statements FALSE log-slow-queries (No default value) log-tc tc.log log-tc-size 24576 log-update (No default value) log-warnings 1 3.) Does that mean there is no logging enabled in mysetup? thanks in advance! Joel

    Read the article

  • Free or Open Solution for Storing and Charting CSV data

    - by rrrfusco
    I'm presently storing CSV files, combining them, opening them in open office, creating pivot tables and then generating charts from the spreadsheet. I've looked at OOBase, but appending csv files to base is clunky for some reason. SQLite seems like a good database solution, but I've haven't found a good charting program that connects to it with ease. Although open office (or libreoffice) maintains the references and allows you to update the information, this process is far from efficient. There are too many steps and it seems one program should handle all of these tasks. A better program would be more intuitive, allow you to simply add inserts into a database, and include an interface for standard charting settings. EDIT Simplest Automated Analysis and Chart Generation Tool? The above answer references Spotfire and Tableau, each of which has a free 14 and 30 day trial. Each program is nicely streamlined and designed. I'm looking for a program between this quality and LibreOffice. Can you recommend a better open or free desktop solution for windows?

    Read the article

  • Windows system restore deletes various executables and *.js files. How does it decide which files to delete?

    - by Leftium
    I restored my system from a Windows System Restore point. It solved some issues I was having, but introduced other strange problems (like my optical drive disappeared). One thing that surprised me was several files from my Web2Py installation were deleted: the executables and *.js files; possibly some others (like favicon.ico). I did not expect this because Web2Py is basically a portable, standalone application. You just unzip it and run the executable inside, so nothing should be registered with Windows. My question is: what files does Windows system restore delete, and how does it decide this? I'm just wondering what other files I'm missing and if there's a way to get restore them (without rolling back the restore point). Perhaps it scans for certain files types (like exe, js, ico, dll) with a creation date that was after the restore point creation date? Some other people who experienced a similar problem: Dropbox: Lost Files User files missing after run system restore. update: I found some more references on how Windows System Restore works: Understanding how System Restore in Windows Vista treats executable files Why Vista's System Restore is Dangerous and What to do About it

    Read the article

  • netlogon errors

    - by rorr
    I have two instances of mssql 2005 and am using CA XOSoft replication. The master is a failover cluster and the replica is a standalone server. They are all running Server 2003 sp2 x64. Same patch levels on all servers. This setup has worked great for several months until we recently restricted the RPC ports on both nodes of the master(5000 - 6000 using rpccfg.exe). We have to implement egress filtering, thus the limiting of the ports. We began receiving login errors for sql windows authentication and NETLOGON Event ID: 5719: This computer was not able to set up a secure session with a domain controller in domain due to the following: Not enough storage is available to process this command. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. We also see group policies failing to update and cluster file shares go offline at the same time. The RPC ports were set back to default when we started seeing these problems and the servers rebooted, but the problems persist. The domain controllers are not showing any errors. Running dcdiag and netdiag shows everything is fine. We have noticed that the XOSoft service ws_rep.exe is using a lot of handles(8 - 9k), about the same number that sqlserver is using. As soon as xosoft replication is stopped the login errors cease and everything functions correctly. I have opened a ticket with CA for XOSoft, but I'm not sure that the problem is actually xosoft, but that it is the one bringing the problem to light. I'm looking for tips on debugging RPC problems. Specifically on limiting the ports and then reverting the changes.

    Read the article

  • Postfix configuration - Uing virtual min but server is bouncing back my mail.

    - by brodiebrodie
    I have no experience in setting up postfix, and thought virtualmin minght do the legwork for me. Appears not. When I try to send mail to the domain (either [email protected] [email protected] or [email protected]) I get the following message returned This is the mail system at host dedq239.localdomain. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to <postmaster> If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system <[email protected]> (expanded from <[email protected]>): User unknown in virtual alias table Final-Recipient: rfc822; [email protected] Original-Recipient: rfc822;[email protected] Action: failed Status: 5.0.0 Diagnostic-Code: X-Postfix; User unknown in virtual alias table How can I diagnose the problem here? It seems that the mail gets to my server but the server fails to locally deliver the message to the correct user. (This is a guess, truthfully I have no idea what is happening). I have checked my virtual alias table and it seems to be set up correctly (I can post if this would be helpful). Can anyone give me a clue as to the next step? Thanks alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 html_directory = no local_recipient_maps = $virtual_mailbox_maps mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = permit_mynetworks reject_unauth_destination smtpd_sasl_auth_enable = yes soft_bounce = no unknown_local_recipient_reject_code = 550 virtual_alias_maps = hash:/etc/postfix/virtual My mail log file (the last entry) Sep 30 15:13:47 dedq239 postfix/cleanup[7237]: 207C6B18158: message-id=<[email protected]> Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 207C6B18158: from=<[email protected]>, size=1805, nrcpt=1 (queue active) Sep 30 15:13:47 dedq239 postfix/error[7238]: 207C6B18158: to=<[email protected]>, orig_to=<[email protected]>, relay=none, delay=0.64, delays=0.61/0.01/0/0.02, dsn=5.0.0, status=bounced (User unknown in virtual alias table) Sep 30 15:13:47 dedq239 postfix/cleanup[7237]: 8DC13B18169: message-id=<[email protected]> Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 8DC13B18169: from=<>, size=3691, nrcpt=1 (queue active) Sep 30 15:13:47 dedq239 postfix/bounce[7239]: 207C6B18158: sender non-delivery notification: 8DC13B18169 Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 207C6B18158: removed Sep 30 15:13:48 dedq239 postfix/smtp[7240]: 8DC13B18169: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[209.85.216.55]:25, delay=1.3, delays=0.02/0.01/0.58/0.75, dsn=2.0.0, status=sent (250 2.0.0 OK 1254348828 36si15082901pxi.91) Sep 30 15:13:48 dedq239 postfix/qmgr[7177]: 8DC13B18169: removed Sep 30 15:14:17 dedq239 postfix/smtpd[7233]: disconnect from mail-bw0-f228.google.com[209.85.218.228] etc.aliases file below I have not touched this file - myvirtualdomain is a replacement for my real domain name # Aliases in this file will NOT be expanded in the header from # Mail, but WILL be visible over networks or from /bin/mail. # # >>>>>>>>>> The program "newaliases" must be run after # >> NOTE >> this file is updated for any changes to # >>>>>>>>>> show through to sendmail. # # Basic system aliases -- these MUST be present. mailer-daemon: postmaster postmaster: root # General redirections for pseudo accounts. bin: root daemon: root adm: root lp: root sync: root shutdown: root halt: root mail: root news: root uucp: root operator: root games: root gopher: root ftp: root nobody: root radiusd: root nut: root dbus: root vcsa: root canna: root wnn: root rpm: root nscd: root pcap: root apache: root webalizer: root dovecot: root fax: root quagga: root radvd: root pvm: root amanda: root privoxy: root ident: root named: root xfs: root gdm: root mailnull: root postgres: root sshd: root smmsp: root postfix: root netdump: root ldap: root squid: root ntp: root mysql: root desktop: root rpcuser: root rpc: root nfsnobody: root ingres: root system: root toor: root manager: root dumper: root abuse: root newsadm: news newsadmin: news usenet: news ftpadm: ftp ftpadmin: ftp ftp-adm: ftp ftp-admin: ftp www: webmaster webmaster: root noc: root security: root hostmaster: root info: postmaster marketing: postmaster sales: postmaster support: postmaster # trap decode to catch security attacks decode: root # Person who should get root's mail #root: marc abuse-myvirtualdomain.com: [email protected] My etc/postfix/virtual file is below - again myvirtualdomain is a replacement. I think this file was generated by Virtualmin and I have tried messing around with is with no success... This is the version without my changes. myunixusername@myvirtualdomain .com myunixusername myvirtualdomain .com myvirtualdomain.com [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected]

    Read the article

  • Why is uploading to S3 so slow?

    - by Tom Marthenal
    I am using s3cmd to upload to S3: # s3cmd put 1gb.bin s3://my-bucket/1gb.bin 1gb.bin -> s3://my-bucket/1gb.bin [1 of 1] 366706688 of 1073741824 34% in 371s 963.22 kB/s I am uploading from Linode, which has an outgoing bandwidth cap of 50 Mb/s according to support (roughly 6 MB/s). Why am I getting such slow upload speeds to S3, and how can I improve them? Update: Uploading the same file via SCP to an m1.medium EC2 instance (SCP from my Linode to the instance's EBS drive) gives about 44 Mb/s according to iftop (any compression done by the cipher is not a factor). Traceroute: Here's a traceroute to the server it's uploading to (according to tcpdump). # traceroute s3-1-w.amazonaws.com. traceroute to s3-1-w.amazonaws.com. (72.21.194.32), 30 hops max, 60 byte packets 1 207.99.1.13 (207.99.1.13) 0.635 ms 0.743 ms 0.723 ms 2 207.99.53.41 (207.99.53.41) 0.683 ms 0.865 ms 0.915 ms 3 vlan801.tbr1.mmu.nac.net (209.123.10.9) 0.397 ms 0.541 ms 0.527 ms 4 0.e1-1.tbr1.tl9.nac.net (209.123.10.102) 1.400 ms 1.481 ms 1.508 ms 5 0.gi-0-0-0.pr1.tl9.nac.net (209.123.11.62) 1.602 ms 1.677 ms 1.699 ms 6 equinix02-iad2.amazon.com (206.223.115.35) 9.393 ms 8.925 ms 8.900 ms 7 72.21.220.41 (72.21.220.41) 32.610 ms 9.812 ms 9.789 ms 8 72.21.222.141 (72.21.222.141) 9.519 ms 9.439 ms 9.443 ms 9 72.21.218.3 (72.21.218.3) 10.245 ms 10.202 ms 10.154 ms 10 * * * 11 * * * 12 * * * 13 * * * 14 * * * 15 * * * 16 * * * 17 * * * 18 * * * 19 * * * 20 * * * 21 * * * 22 * * * 23 * * * 24 * * * 25 * * * 26 * * * 27 * * * 28 * * * 29 * * * 30 * * * The latency looks reasonable, at least until the server stopped responding to ping requests.

    Read the article

  • System hangs while rebooting on Debian...

    - by Usman
    Hi, I have Debian (Kernel 2.6.26-2-686) installed on two computers. On one of them it reboots quite finely but I am having following problem with rebooting Debian on my second computer. When i type reboot at the Linux prompt, following messages appear and system hangs up after saying "Restarting System": Broadcast message from root@myname (tty1) (Sun Jan 17 11:23:26 2010) The system is going down for reboot NOW! INIT: Switching to runlevel: 6 INIT: Sending processes the TERM signal Saving system clock Stopping enhanced syslog: rsyslogd. Asking all remaining processes to terminate...done. Deconfiguring network interfaces...done. Cleaning up ifupdown.... Deactivating swap...done. [ 31.789103] Restarting System. _ Normally when the sytem is busy "" sign blinks but "" at the last line above does not blink which shows, the system hanged up. I tried all keys but the screen is still frozen at the same point. The difference that I noted between my two computers is that I don't have ACPI support in the BIOS of the system which is giving me this error whereas the BIOS of my first computer do have ACPI support on which Debain do not give this restart-hanging problem. I have also disabled running the acpid script by running update-rc.d -f acpid remove but the problem still persists on the second computer. Any ideas to solve or get around this problem?

    Read the article

  • HP c6180 driver refuses to install - "must reboot to continue delete files and continue install" loo

    - by Aszurom
    User called me last night, can't get HP drivers to install for printer. 500 meg download for latest c6180 driver. PC says "computer must be restarted to delete some files, then setup will continue." and it won't pass that point. (that's not exact phrasing of the error, and I'm not on the system now) Target machine is XP SP2. I upgraded to SP3. Fully patched. Ran malwarebytes, spybot, hijack this and turned off all startup entries. I noted that windows update also failed on optional printer driver updates for other printers installed on the machine. Went to printer server properties, removed all print drivers from system, deleted all printer ports. Made sure no services were marked disabled. After 5 hours of fighting this I started to get desperate, and uninstalled anything that referenced HP in the machine at all. Still no cure. I'm 6 hours into this and completely stumped. Google returns nothing applicable except unanswered requests for help on same topic.

    Read the article

  • Can IIS (Ideally Azure) do SSL Proxying?

    - by Acoustic
    My team has been asked to add a new feature to a project we're working on, and none of can find authoritative details on whether it's possible with Windows/IIS. The short of it is that we're hoping to have customers update their DNS with a CNAME record to point their website to our server instead of theirs (they why's are trivial - it's what the app does on behalf of your site). We're using a reverse proxy with several custom modules to serve particular content from the original servers. So far everything works perfectly until we encounter SSL. Is there a way to have IIS serve up an SSL certificate from another server? In other words, is there a way to be a trusted man in the middle? I'm hoping that's possible so that we don't have to require all our clients to re-issue their SSL certs. Frankly, we don't want to have to manage hundreds of certs. I'd also like to avoid a UCC situation if there's a way to because it seems to require re-creating the cert each time a client is added. So, any pointers on proxying/hosting SSL (or even dynamic SSL hosting like http://www.globalsign.com/cloud/) would be appreciated.

    Read the article

  • Windows 7 - "A disk read error occured. Press Ctrl + Alt + Del to restart"

    - by Senthil
    Problem: When I switch on my PC, after BIOS POST, a cursor is blinking for about 5 seconds and then I am getting this error message: A disk read error occurred. Press Ctrl + Alt + Del to restart. I am able to go into BIOS. But Windows loader doesn't even start. This message is shown after my motherboard logo comes and goes. Symptoms: I DID notice my system freezing for minutes at a time for past two days. Also, in the past two days, it stopped half way through the Window booting process. I had to do hard reset couple of times to get it working. But since today morning, I only get this error message. Configuration: Operating System: Windows 7 Ultimate 32-bit only. Hard disk: 1 Physical Disk - 80GB SATA Partitions: Two (2) - C: and D: File System: NTFS No drive encryption or compression is turned on. After I searched on the net, I have found people mentioning these possible causes: Hard Disk is physically failing Corrupt MBR Bad Sector I am planning to buy a new hard disk, install Windows on it and continue. But I need data from the old hard disk. The data I want is in D: drive, outside any Windows user folder, is not encrypted or compressed or protected in anyway. I think if someone/something can get the disk working again and knows NTFS, the data can be hopefully read. What steps should I follow to recover files from the defective disk? Update: I bought a new disk, installed windows on it and added the defective one as a slave. Then I was able to read the data from the defective hard disk. Though chkdsk found lots of errors, the files I wanted were not affected and I got them back :) I am not using that hard disk anymore though it seems to be working at the moment.

    Read the article

  • Running multiple services on different servers with IPv6 and a FQDN

    - by Mark Henderson
    One of the things NAT has permitted us to do in the past decade is split physical services onto different servers whilst hiding behind a single interface. For example, I have example.com behind a NAT on 192.0.2.10. I port-forward :80 and :443 to my web server. I'm also port forward :25 to my mail server, and :3389 to a terminal server and :8080 to the web interface of my computer that downloads torrents, and the story goes on. So I have 5 port forwardings going to 4 different computers on example.com. Then, I go and get me some neat IPv6. I assign example.com an IPv6 address of 2001:db8:88:200::10. That's great for my websites, but I want to go to example.com:8080 to get to my torrents, or example:3389 to log on to my terminal server. How can I do this with IPv6, as there is no NAT. Sure, I could create a bunch of new DNS entries for each new service, but then I have to update all my clients who are used to just typing example.com to get to either the website or the terminal server. My users are dumber than two bricks so they won't remember to connect to rdp.example.com. What options do I have for keeping NAT-style functionality with IPv6? In case you haven't figured it out, the above scenario is not a real scenario for me, or perhaps anyone yet, but it's bound to happen eventually. You know, with devops and all.

    Read the article

  • How do I stop MSYS from transforming my compiler options?

    - by Carl Norum
    Is there a way to stop MSYS/MinGW from transforming what it thinks are paths on my command lines? I have a project that's using nmake & Microsoft Visual Studio 2003 (yeecccch). I have the build system all ported and ready to go for GNU make (and tested with Cygwin). Something weird is happening to my compiler flags when I try to compile in an MSYS environment, though. Here's a simplified example: $ cl /nologo Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 13.10.6030 for 80x86 Copyright (C) Microsoft Corporation. All rights reserved. /out:nologo.exe C:/msys/1.0/nologo LINK : fatal error LNK1181: cannot open input file 'C:/msys/1.0/nologo.obj' As you can see, MSYS is transforming the /nologo compiler switch into a windows path, and then sending that to the compiler. I really don't want this to happen - in fact I'd be happy if MSYS never transformed any paths - my build system had to take care of all that when I first ported to Cygwin. Is there a way to make that happen? It does work to change the command to $ cl -nologo Which produces the expected results, but this build system is very large and very painful to update. I really don't want to have to go in and change every use of a / for a flag to a -. In particular, there may be tools that don't support the use of the - at all, and then I'll really be stuck. Thanks for any suggestions!

    Read the article

  • No Outbound Internet on Windows Home Server

    - by Kyle B.
    Could someone provide some steps for me to check my internet connection on my Windows Home Server? It seems to have intermittent connectivity issues and I am unsure of how to diagnose the problem because it is a headless (no monitor, no keyboard) machine so the only way to get to the device is via remote desktop (which works fine). When connected to the machine, it doesn't pull up any microsoft.com sites and some other sites it does pull up (i.e. gmail.com) and some it doesn't (stackoverflow.com). To make matters more complicated, it has worked intermittently in the past for reasons unknown. Are there tools I can use to properly diagnose the reason for the connection failure? I can ping 127.0.0.1 just fine, I have internet working on my other router-connected machines, so I'm not sure why this one would fail. Any suggestions would be much appreciated and up-voted :) ** edit - thanks for suggestions guys, I'm going to try these tonight and will update my post. ** edit #2 - I hoping this is a more permanant fix, but I have both changed my port on the router as well as restarted the router at the same time. The internet (for the moment) appears to be working. I will be sure to try everything we have discussed should this problem persist. Thanks, Kyle

    Read the article

  • Unable To Successfully Use Java Anywhere (Windows 7 64bit)

    - by Nathan Smith
    This is a bit of an odd issue: (This is with JRE 7u7 32bit.) New Lenovo W530 laptop, everything is shiny. I tried to use a java applet for the first time recently (in Chrome). I got the Java logo and it started spinning like it was going to load, but didn't get anywhere and the browser locked up. I tried IE. Same deal. Tried Firefox. Same deal. So, I did the usual things: Rebooted, nothing. Un-installed Java, rebooted, re-installed, nothing. Tried it installing a 64bit Java as well. Same thing. I tried JRE6. Same thing. I uninstalled and manually deleted all the registry entries I could find related to it, then re-installed. Same thing. I un-installed and used the JavaRa utility. Same exact thing. I've not been able to use web applets or desktop stuff (minecraft), until yesterday. I did a graphics driver update and I was able to play minecraft for small amounts of time. It crashed regularly and wouldn't start reliably. No change in web applets. I'm at my wits end here. I'm to the point where reformatting is my only option. If anyone has any ideas at all, that would be awesome.

    Read the article

  • Recommended programming language for linux server management and web ui integration

    - by Brendan Martens
    I am interested in making an in house web ui to ease some of the management tasks I face with administrating many servers; think Canonical's Landscape. This means doing things like, applying package updates simultaneously across servers, perhaps installing a custom .deb (I use ubuntu/debian.) Reviewing server logs, executing custom scripts, viewing status information for all my servers. I hope to be able to reuse existing command line tools instead of rewriting the exact same operations in a different language myself. I really want to develop something that allows me to continue managing on the ssh level but offers the power of a web interface for easily applying the same infrastructure wide changes. They should not be mutually exclusive. What are some recommended programming languages to use for doing this kind of development and tying it into a web ui? Why do you recommend the language(s) you do? I am not an experienced programmer, but view this as an opportunity to scratch some of my own itches as well as become a better programmer. I do not care specifically if one language is harder than another, but am more interested in picking the best tools for the job from the beginning. Feel free to recommend any existing projects that already integrate management of many systems into a single cohesive web ui, except Landscape (not free,) Ebox (ebox control center not free) and webmin (I don't like it, feels clunky and does not integrate well with the "debian way" of maintaining a server, imo. Also, only manages one system.) Thanks for any ideas! Update: I am not looking to reinvent the wheel of systems management, I just want to "glue" many preexisting and excellent tools together where possible and appropriate; this is why I wonder about what languages can interact well with pre-existing command line tools, while making them manageable with a web ui.

    Read the article

  • Wireless disconnect randomly with wpa_supplicant reason=2

    - by renenglish
    I installed ubuntu-server 12.04 on my PC , and I use an usb wireless card to join the network. It works ok when I boot up my PC , but the wireless disconnects after a while. I pkill wpa_supplicant and reload the driver rtl8192cu , then it works a again. Then it disconnect again after about a random minutes. Here is the syslog: 22384 May 29 21:49:27 homecenter kernel: [ 6450.459313] wlan1: authenticated 22385 May 29 21:49:27 homecenter kernel: [ 6450.459535] wlan1: associate with f4:ec:38:45:62:74 (try 1) 22386 May 29 21:49:27 homecenter kernel: [ 6450.469080] wlan1: RX AssocResp from f4:ec:38:45:62:74 (capab=0 x431 status=0 aid=3) 22387 May 29 21:49:27 homecenter kernel: [ 6450.469085] wlan1: associated 22388 May 29 21:49:27 homecenter wpa_supplicant[2342]: Associated with f4:ec:38:45:62:74 22389 May 29 21:49:27 homecenter kernel: [ 6450.481933] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready 22390 May 29 21:49:27 homecenter wpa_supplicant[2342]: WPA: Key negotiation completed with f4:ec:38:45:62:7 4 [PTK=CCMP GTK=CCMP] 22391 May 29 21:49:27 homecenter wpa_supplicant[2342]: CTRL-EVENT-CONNECTED - Connection to f4:ec:38:45:62: 74 completed (auth) [id=0 id_str=] 22392 May 29 21:49:38 homecenter kernel: [ 6461.472014] wlan1: no IPv6 routers present 22393 May 29 21:49:38 homecenter ntpdate[2263]: step time server 91.189.94.4 offset 0.012758 sec 22394 May 29 21:49:51 homecenter ntpdate[2404]: step time server 91.189.94.4 offset -0.001190 sec 22395 May 29 21:54:38 homecenter kernel: [ 6762.052030] wlan1: deauthenticated from f4:ec:38:45:62:74 (Reas on: 2) 22396 May 29 21:54:38 homecenter wpa_supplicant[2342]: CTRL-EVENT-DISCONNECTED bssid=f4:ec:38:45:62:74 reas on=2 22397 May 29 21:54:38 homecenter kernel: [ 6762.064744] cfg80211: All devices are disconnected, going to re store regulatory settings 22398 May 29 21:54:38 homecenter kernel: [ 6762.064752] cfg80211: Restoring regulatory settings 22399 May 29 21:54:38 homecenter kernel: [ 6762.064757] cfg80211: Calling CRDA to update world regulatory d omain 22400 May 29 21:54:38 homecenter kernel: [ 6762.069938] cfg80211: Ignoring regulatory request Set by core s ince the driver uses its own custom regulatory domain 22401 May 29 21:54:38 homecenter kernel: [ 6762.069943] cfg80211: World regulatory domain updated: 22402 May 29 21:54:38 homecenter kernel: [ 6762.069945] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) 22403 May 29 21:54:38 homecenter kernel: [ 6762.069949] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22404 May 29 21:54:38 homecenter kernel: [ 6762.069952] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22405 May 29 21:54:38 homecenter kernel: [ 6762.069956] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KH z), (300 mBi, 2000 mBm) 22406 May 29 21:54:38 homecenter kernel: [ 6762.069959] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KH z), (300 mBi, 2000 mBm) 22407 May 29 21:54:38 homecenter kernel: [ 6762.069962] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KH z), (300 mBi, 2000 mBm)

    Read the article

  • Google Play Music Not Adding MP3s On-Demand

    - by J0e3gan
    My recent attempts to add music on-demand to Google Play Music have yielded nothing - no "Processing music..." or "Added __ of __" messages, just nothing. Previously I could add music on-demand; and nothing has changed on the machine from which I successfully added music previously, from which I have tried to add music on-demand recently. What could be hampering my ability to add music on-demand? WHAT I'VE TRIED: Right after I started using GPM, I briefly found that I could not add music (on-demand), but the problem went away after a logout/login. This time a logout/login has not helped. Dragging & dropping or browsing to folders or files to add has made no difference either. Nor has waiting ridiculously long for GPM to show signs of life after adding music on-demand seemed to work. Digging deeper, I read a related Google Play Help article and followed its suggestions... ran the Google Play Music Manager troubleshooter = no errors or warnings double checked my available storage = 8 GB free double checked supported file types = MP3 is still supported (of course) ..., but the problem remains. UPDATE: I found that if I configure GPM to automatically upload music added to specific folders, it strangely does add automatically what it will not add on-demand.

    Read the article

  • Debian 5.0 (lenny) apt sources fail?

    - by Tronic
    For the past few days, I couldn't update our apt-sources on Debian 5.0 (lenny). I get the following errors. W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/main/binary-amd64/Packages 404 Not Found [IP: 130.89.148.12 80] W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/contrib/binary-amd64/Packages 404 Not Found [IP: 130.89.148.12 80] W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/non-free/binary-amd64/Packages 404 Not Found [IP: 130.89.148.12 80] W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/main/source/Sources 404 Not Found [IP: 130.89.148.12 80] W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/contrib/source/Sources 404 Not Found [IP: 130.89.148.12 80] W: Failed to fetch http://ftp.debian.org/debian/dists/lenny/non-free/source/Sources 404 Not Found [IP: 130.89.148.12 80] How do I fix this problem? Edit: My current sources are: # Debian Lenny deb http://ftp.de.debian.org/debian/ lenny main non-free contrib deb-src http://ftp.de.debian.org/debian/ lenny main non-free contrib # Debian Lenny Non-US deb http://non-us.debian.org/debian-non-US lenny/non-US main contrib non-free deb-src http://non-us.debian.org/debian-non-US lenny/non-US main contrib non-free # Debian Lenny Security deb http://security.debian.org/ lenny/updates main contrib non-free

    Read the article

  • WGet or cURL: Mirror Site from http://site.com And No Internal Access

    - by alharaka
    I have tried wget -m wget -r and a whole bunch of variations. I am getting some of the images on http://site.com, one of the scripts, and none of the CSS, even with the fscking -p parameter. The only HTML page is index.html and there are several more referenced, so I am at a loss. curlmirror.pl on the cURL developers website does not seem to get the job done either. Is there something I am missing? I have tried different levels of recursion with only this URL, but I get the feeling I am missing something. Long story short, some school allows its students to submit web projects, but they want to know how they can collect everything for the instructor who will grade it, instead of him going to all the externally hsoted sites. UPDATE: I think I figured out the issue. I though the links to the other pages were in the index.html page that downloaded. I was way off. Turns out the footer of the page, which has all the navigation links, is handled by a JavaScript file Include.js, which reads JLSSiteMap.js and some other JS files to do page navigation and the like. As a result, wget does not pick up an other dependencies because a lot of this crap is handled not on web pages. How can I handle such a website? This is one of several problem cases. I assume little can be done if wget cannot parse JavaScript.

    Read the article

  • Unable to connect remotely to Vsftpd server set up on CentOS VirtualBox

    - by ryekayo
    I have set up a Vsftp server using the following instructions provided Here and even went as far as following the commentary at the bottom. But I am unable to connect remotely. When I attempt to use FileZilla or my Ubuntu terminal, I always get: ryan@ryan-Galago-UltraPro:~$ ftp 10.0.x.xx ftp: connect: Connection timed out ftp> I have checked and re-checked iptables conf file and made sure that Port 21 is being Accepted and it is. I have looked this up on the web and decided to try nmap to port scan it and this is what I get for a result: ryan@ryan-Galago-UltraPro:~$ nmap -PN 10.0.xx.xx Starting Nmap 6.40 ( http://nmap.org ) at 2014-08-19 15:01 EDT Nmap scan report for 10.0.xx.xx Host is up. All 1000 scanned ports on 10.0.xx.xx are filtered Nmap done: 1 IP address (1 host up) scanned in 201.38 seconds Is there anything else that I should do or check for? UPDATE: I have tried to ping from the virtual machine to my IP address on Ubuntu and have been successfully able to. I cannot ping to my virtual machine from Ubuntu. I have narrowed this down to possibly being a firewall related issue on Ubuntu's side, but why would I be unable to connect from FileZilla?

    Read the article

  • How can I erase the traces of Folder Redirection from the Default Domain Policy

    - by bruor
    I've taken over from an IT outsourcer and have found a struggle now that we're starting a migration to windows 7. Someone decided that they would setup Folder redirection in the Default Domain Policy. I've since configured redirection in another policy at an OU level. No matter what I do, the windows 7 systems pick up the Default Domain Policy folder redirection settings only. I keep getting entries in the event log showing that the previously redirected folders "need to be redirected" with a status of 0x80000004. From what I can tell this just means that it's redirecting them locally. Is there a way I can wipe that section of the GPO clean so it's no longer there? I'm hesitant to try to reset the default domain policy to complete defaults. ***UPDATE 6-26 I found that the following condition occurred and was causing the grief here. I've already implemented the new policies for clients, and for some reason, XP was working great, 7 was refusing to process. The DDP was enforced. Because of this, and the fact that the folder redirection policies were set to redirect back to the local profile upon removal, it was forcing clients to pick up it's "redirect to local" settings. Requirements for to recreate the issue. -Create a new test OU and policy. -Create some folder redirection settings, set them to redirect to local upon removal -Remove settings on that GPO -Refresh your view of the GPO and check the settings. -You'll notice that the settings show "not configured" entries for folder redirection. -Enforce this GPO -Create another sub-OU -Create a GPO linked to this sub-ou and configure some folder redirection settings. -Watch as the enforced GPOs "not configured" setting overrides the policy you just defined. I've had to relink the DDP to all OU's that have "block inheritance" enabled, and disable the "enforced" option on the DDP as a workaround. I'd love to re-enable enforcement of the DDP, but until I can erase the traces of folder redirection settings from the DDP, I think I'm stuck.

    Read the article

< Previous Page | 778 779 780 781 782 783 784 785 786 787 788 789  | Next Page >