Search Results

Search found 25660 results on 1027 pages for 'booting issue'.

Page 783/1027 | < Previous Page | 779 780 781 782 783 784 785 786 787 788 789 790  | Next Page >

• If I partition a drive connected via eSata will it show different partitions when connected via USB?

  - by jeffreypriebe

  I have an odd problem with an external drive. I'm formatting it connected to my laptop prior to connecting it to my router. The HDD enclosure has both an eSata and USB connections. Generally, I connect it via eSata to my laptop. I created my partitions and connected it to the router, but I see partition information that is different than what I created. After chasing leads concerning large HDD size, I mindlessly connected the HDD to my laptop with USB. Lo! I see the same partitions as the router. Attached are screenshots using the same program and the HDD in question. The only difference is the connection. For the first, I connected via eSata and hit "refresh" on the partition program. Then, turned off the HDD, disconnected the eSata cable, and connected via USB. Power and refresh. eSata: reports a total HDD size of 2328 GB, with four partitions (the third being 1.96TB) USB: reports a total HDD size of 280 GB, with three partitions (the third being 279 GB) Any idea why this is happening? It looks like it clearly is an issue of the 4K sector size and not playing nice with the USB enclosure. I tried it eSata and USB in Windows and Linux and it appears consistently that eSata is reporting correctly, USB incorrectly.

  Read the article

• Why would one of my servers stop being able to access other servers by FQDN?

  - by Newlyn Erratt

  I have a number of servers on our local network and our debian server has suddenly stopped being able to access the other servers via their FQDN. Initial symptom was inability to login with Active Directory accounts. On further inspection, this machine, porkbelly, was unable to access our other servers (e.g. bacon and albert) via their FQDN. That is, they can ping albert by running ping albert but not by running ping albert.domain.local though when running ping albert it will be expanded to albert.domain.local. The server is still accessible from other servers via both porkbelly and porkbelly.domain.local. Upon examination of hosts information and running hostname its hostname and FQDN are correct. The resolv.conf appears correct. It contains: domain domain.local search domain.local nameserver 192.168.0.xxx (the nameserver) The dns server is also our Windows AD server. I'm not even sure where to go from here or why dns seems to be partially working though I don't have much experience. Where should I go from here? What might be causing this issue where machines are visible via their hostname but not their FQDN?

  Read the article

• SSH Private Key Not Working in Some Directories

  - by uesp

  I have a strange issue where SSH won't properly connect with a private-key if the key file is in certain directories. I've setup the keys on a set of servers and the following command ssh -i /root/privatekey [email protected] works fine and I login to the given host without getting prompted by a password, but this command: ssh -i /etc/keyfiles/privatekey [email protected] gives me a password prompt. I've narrowed it down that this behavior occurs in only some sub-directories of /etc/. For example /etc/httpd1/ gives me a password prompt but /etc/httpd/ does not. What I've checked so far: All private key files used are identical (copied from the original file). The private key file and directories used have identical permissions. No relevant error messages in the server/client logs. No interesting debug messages from ssh -v (it just seems to skip the key file). It happens with connecting to different hosts. After more testing it is not the actual directory name. For example: mkdir /etc/test cp /root/privatekey /etc/test ssh -i /etc/test/privatekey [email protected] # Results in password prompt cp /root/privatekey /etc/httpd # Existing directory ls -ald test httpd # drwxr-xr-x 4 root root 4096 Mar 5 18:25 httpd # drwxr-xr-x 2 root root 4096 Mar 5 18:43 test ssh -i /etc/httpd/privatekey [email protected] # Results in *no* prompt rm -r test cp -R /etc/httpd /etc/test ssh -i /etc/test/privatekey [email protected] # Results in *no* prompt` I'm sure its just something simple I've overlooked but I'm at a loss.

  Read the article

• How to configure a trusted connection between IIS 7 and SQL Server 2005?

  - by user1180652

  How do configure a trusted connection between IIS 7 and SQL Server 2005? My webapp was working fine with Windows Authentication enabled in IIS. Now, in order to solve a problem, we need to use a trusted connection. Unfortunately, enabling the trusted connection in the web.config broke the webapp. Oddly enough, when I run this application with trusted connection from my local dev machine (using the Cassini web server) IIS (Windows Server 2008) is running on one machine. The database (SQL Server 2005 but could migrate to 2008) is running on another machine. We are on a Windows domain running AD. All traffic is within our own firewall - no public access. Beyond that, I can't provide much info but I can find it. We're very "compartmentalized" (we have server people, security people, oracle people, SQL Server people, etc.) Thanks! Update 02/14/2012 0902: The webapp is now functional (app no longer broken) but the main issue is still unresolved. Now I have the app's application pool running as a domain account with permissions on the SQL Server box and IIS box. We were using this account to run the application but, and here's the problem, we need to log the real user name that made a change. When using the service account, the name of that service account appeared in the audit tables, making the auditing quite useless. So, not I'm at least running again. The connection string in the web.config is using "Trusted_Connection=True", the appPool is using a domain account with access to both boxes, BUT when I make a change (logged in as me) the name of the service account (appPool identity) is still logged in the audit tables. I also manually granted full permissions to the service account on the webapp folder. What do I need to do in order to log my name, not the service account, in the audit tables? Everything I'm reading says I need to establish a trusted connection between the two servers.

  Read the article

• Why won't my computer go to sleep automatically?

  - by Django Reinhardt

  Windows 8 is set to sleep after 30 mins, and it used to work, but recently it's started refusing to sleep. (I can still manually ask it to go to sleep without any issue.) I was having issues a while ago, but it was with my network adapter. That's since been disabled, so it's definitely not that: I've checked to see what devices are able to wake up my machine, but it only appears to be my mouse: Which is odd, because I haven't recently changed my mouse, and more confusing still: The monitor does go to sleep just fine. If it was actually the mouse keeping my system awake, I'm pretty sure the monitor wouldn't go to sleep. I've checked my Wake Timers, and nothing: I've also checked my existing requests... UPDATE: I found something. What to do with it, I don't know... Note: Even when /requests says that there's "NONE" under every category, my machine still won't sleep(!). In short: How can I tell what's preventing my computer from Sleeping? UPDATE: Ok, so I now have a few more pieces of the puzzle. I came back to my computer and it was ASLEEP! Lawks! It seems that the only times it doesn't sleep is if VLC Player is open, even if a video isn't actually playing. UPDATE UPDATE: Ok, so it won't sleep sometimes when VLC Player ISN'T running, either. Bah!

  Read the article

• Bandwidth Suggestion

  - by Campo

  I have been asked to analyze the bandwidth usage of a company and make a recommendation for upgrading their Internet connection(s). Here is the layout 3 DLS lines so it is 3x(6 Down, 1 Up Each) into a load balancer out to the office's network. 30 VOIP phones run on a T1 (1.5 Down, 1.5 Up) The users at the company are heavily uploading. It is my suspicion that the issue in slowdown is being cause by multiple people uploading and others not being able to get requests out for even simple http requests. My initial idea is to get them a fiber line with a 10 down and 10 up. What do others think on this plan? Will that be enough to host their network traffic? What do I do about the VOIP line afterward? The fiber is expensive and I know the T1 does a great job for their VOIP so I do not want to suggest a DSL line because I know it may not be sufficient. I would also like to save them some money if I can. Maybe even get a faster fiber line and forgo the T1. Though I know their load balance/switch can only handle 20MB/S throughput. Looking for some confirmation/suggestions on my plan. I am planning on going in to get some real diagnostic numbers. Any suggestions on software to use for that? Preferably Windows software.

  Read the article

• Computer turns itself on after any off mode

  - by Patrick

  Whenever I shut down my computer, or put it in sleep/hybernate, it turns on after two seconds. It doesn't post, it just powers on and then idles. To actually turn it off, I switch off the psu. The problem is now, whenever I switch the psu on and try to boot, it doesn't always turn on. It takes a good amount of flicking the psu switch on and off before the motherboard lights up. So far I've determined the things its not: its not caused by the mouse or network waking up the computer. I've been able to go into hybernate for the past year. And all "wake on X" settings in the bios are diabled. its not a scheduled task waking up the computer at a given hour, it occurs every single time its not due to an upgrade or new installation, since I haven't done either in a very long time I'm sure its a hardware issue. So I'd like to know, is my psu dead, or the motherboard? The psu is an Antec Earthwatts 600w, the motherboard is an Asus P5Q-E, both one year old.

  Read the article

• Windows 7 mapped drive kicking off OS X users

  - by Collin White

  I've mapped a network drive on my Windows 7 PC at my office. The windows machine has a few TB of storage that is being accessed by my development team (all running mac os 10.7). The share seems to work fine for a little while but will timeout and kick the mac users off and sometimes disallows a connection on the next attempt. Restarting the windows machine fixes the problem. I've tried this tutorial as well as setting the maximum session length in the Local Security Policy section to 99999 (I discovered 0 did not mean unlimited, only a 'reasonable ammount of time') anyway, the setting is now for ~208 days which is sufficient (see attached). I'm having trouble debugging this in general so if anyone has some pointers I'm all ears. This is a intermittent issue which in my opinion are the hardest kinds to debug. If anyone knows of how I might monitor connections from the PC that would also be pretty cool. Previously the files were hosted on a mac mini and everything was working just fine (the mini just didn't have the ability for the storage capacity we needed) so I believe it is some windows setting that is kicking users off. Anyway, thanks for reading.

  Read the article

• Dell Dimension 8400 Startup error

  - by Michael

  Hello all, thanks first for taking the time to read this and possibly help me...... now I am pretty decent of a computer tech...but not enough. I am having an issue with my computer which is running windows xp and as I mentioned it is a dell Dimension 8400. as soon as I power the system up the fan goes into hyper drive (spins like crazy and is very loud) then the start up screen with dell comes up and the loading bar gets stuck on the process of "Bios Revision A00" and never loads beyound that. I have read alot about it and think that the main problem was that it can not locate the file (which does have an updated version) I think it is A09. I can not enter safe mode, Bios mode or anything. I do have the file on my other computer and I was wondering if there is a way that I can use a usb flash drive (as I have read on other sites) to create a bootable MS-Dos diskette but I am failing at creating as such....is this possible? or is there anything else I can do? I tried to remove the battery from the system for about 10 minutes while it was completely unplug and tried then to reboot it and go into the bios menu but the same thing keeps happening....can anyone help me :-(

  Read the article

• Win7 Ultimate 64bit not finding my SSD, any ideas?

  - by Jakub

  So I am trying to install Windows 7 Ultimate 64bit on my new SSD (Kingston SNVP325-S2/64GB) and I have unplugged my other drives (for the install only). The SSD is detected by BIOS, I am running the latest Firmware for my motherboard P5N-E SLI (775 socket). Upon getting the Windows 7 install screen, it gives me a 'no drives detected'. I have tried Load Driver and downloding nForce drivers (latest for Win7 64bit signed WHQL) results in a message of (something like) "To continue please click Load Driver and load 32-bit and signed 64-bit drivers... blah blah" ... basically it does NOT accept my nForce SATA drivers, nor my 2ndary SATA drivers (JMicron? can't recall the exact name now). I have tried F8 at loading to 'disable driver signing' in hopes that it was an unsigned driver, however nothing works. The SSD is not detected by the Windos 7 installer. I wasted 4 hours on this last night, and gave up, and got nowhere. Anyone heard / ran into this issue before? How can I get the drive detected? Some more details: - Kingston SNVP325-S2/64GB V+ SSD - ASUS P5N-E SLI MOBO - 8GB RAM A-DATA (memory is checked out and fine)

  Read the article

• Celery daemon as a Ubuntu service does not consume tasks while running from terminal does

  - by Guy

  On Ubuntu 11.10, I have to issue python tasks from django using celery. I'm currently testing on the same machine but eventually the celery worker should run on a remote machine. django uses the following settings: BROKER_HOST = "127.0.0.1" BROKER_PORT = 5672 BROKER_VHOST = "/my_vhost" BROKER_USER = "celery" BROKER_PASSWORD = "celery" I can also see my task queued in http://localhost:55672/#/queues the celery daemon uses the following configuration (celeryconfig.py): BROKER_HOST = "127.0.0.1" BROKER_PORT = 5672 BROKER_USER = "celery" BROKER_PASSWORD = "celery" BROKER_VHOST = "/my_vhost" CELERY_RESULT_BACKEND = "amqp" import os import sys sys.path.append(os.getcwd()) CELERY_IMPORTS = ("tasks", ) running celeryd -l info works well and now I want to run it as a service. I've followed the instructions from http://ask.github.com/celery/cookbook/daemonizing.html and now I'm trying to run it using: sudo /etc/init.d/celeryd start But the message is not being consumed, no error in the celery log either. /etc/default/celeryd CELERYD_NODES="w1" CELERYD_CHDIR="/path/to/django/project" CELERYD_OPTS="--time-limit=300 --concurrency=1" CELERY_CONFIG_MODULE="celeryconfig" # %n will be replaced with the nodename. CELERYD_LOG_FILE="/var/log/celery/%n.log" CELERYD_PID_FILE="/var/run/celery/%n.pid" # Workers should run as an unprivileged user. CELERYD_USER="celery" CELERYD_GROUP="celery" I've also created user celery in Ubuntu not sure if its necessary. Any help will be appreciated, Thanks, Guy

  Read the article

• Connection problems via Wifi (multiple devices)

  - by Kelvin Farrell

  I'm having connection issues with my router (Linksys WRT610N) at home. There are a number of things that are happening (may be more, this is just what I've mainly noticed)... 1) Using my laptop (Macbook Pro OSX Lion), I am unable to complete any operations with my external FTP server, hosted with FatCow. I can connect to it, navigate through all the files, but when I try to edit/delete/add a file the operation times out. EVERY time. I've used two other Wifi connection on my laptop and neither have this issue. 2) I am unable to upload photos/videos to Facebook or Twitter using my phone (Samsung Galaxy S2) or my tablet (HP Touchpad - CM9). Neither am I able to upload files to Dropbox via either of the devices. Same thing happens in all situations; the upload will begin and it will just hang on 0% forever. After about 10 mins I am always forced to disconnect the Wifi to stop the action. 3) My laptop is having slow internet speed, even though we are on 20mb broadband. Speedtests say I'm getting a good connection and my Ping is good, but when using streaming services like Spotify, it takes forever to load a page and frequently stops to buffer whilst playing a song. Don't know if it's worth mentioning but I have no issues with my XBox (Ethernet), AppleTV (Wifi) or my girlfrield's phone (Nokia Lumia 800 - WP7.5) on the network. I'd really appreciate any help. This is driving me insane and is really affecting both my working and leisure use of the internet.

  Read the article

• TFTP Timing Out on Ubuntu VM

  - by valsidalv

  I'm running a Windows 7 PC with VMware installed which has my Ubuntu (10.04 Lucid Lynx). I recently installed a DHCP server and TFTP (Xinet tftpd) using these instructions. I've mapped a network drive so that my Windows has access to all the files in my VM through a 192.x.x.x IP address. I'm trying to throw some custom firmware onto a router. The router has its own built-in TFTP utility that will download the image. It successfully manages to do everything but it is slow because it writes it to flash memory. There is another method that is much quicker because it writes to RAM directly but it must use the TFTP server in Ubuntu. The issue I'm facing is that the Ubuntu TFTP transfer seems to be timing out. The transfer starts but never goes past ~60%. Here's my /etc/xinetd.d/tftp file (similar to a known working config): service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = -s /home/user/tftp/ disable = no cps = 300 2 per_source = 60 } I've done some searching but can't find any parameters for this file to control timeout time or number of retries. The last two arguments (cps, per_source) and completely alien to me (can anyone explain). I have a few possible solutions but the easiest would be to get this TFTP server working. Can anyone help? Either with a timeout configuration or maybe even recommend a different TFTP server? Thanks!

  Read the article

• NFS Datastore Appears Empty!

  - by daemonchild

  Hi guys, I've got an NFS server problem. The datastore connected and seems to be a valid datastore in both the vSphere client and under /vmfs/volumes. The issue is that it appears to be empty! I can create files (eg: touch /vmfs/volumes/nfs_common/thefile) and it is correctly written to the nfs store. I can verify this by looking on the nfs server itself. But the vmkernel only sees an empty datastore; the file disappears. Another freebsd box can mount the same NFS share and see the files correctly. Some useful data: ESXi 4.0.0 Build 208167 NFS is unfsd running on a Buffalo Linkstation Pro Duo (a bit hacky I know). The share has file system permissions set to 777 at the moment. My /etc/exports is as follows, and as I say it connects fine. /mnt/array1/ESX_Shared 192.168.16.0/255.255.255.0(insecure,rw,sync,no_root_squash,no_subtree_check) The ESXi servers can also successfully mount NFS shares from other NFS servers. Any ideas guys? Thanks, Tom

  Read the article

• PTR record not valid for all domains

  - by charnley

  We have an issue sending emails to certain domains, namely Time Warner and Cox. Last week, we decommissioned our Exchange 2003 server and now our Exchange 2010 server is doing all of the transport for our domain. We run our own authoritative name servers, so we are in charge of the DNS and have modified our PTR record to reflect the new server. All mailflow is working except for these 2 domains. When I telnet on port 25 to the mail servers for Cox and Time Warner I am receiving errors. For Cox the error is: 554... rejected - no rDNS And when I telnet to port 25 to the Time Warner mail server we get this: 554 5.7.1 - Connection refused. IP name lookup failed for x.x.x.x I have run through the outbound SMTP test on Microsoft Remote Connectivity Analyzer and get 100% completely successful results. MXToolbox comes up with all successful tests on SMTP as well, showing correct reverse banner check, and no blacklisting. DNSQueries.com shows a valid reverse DNS entry as well for us. Outbound emails to these 2 domains continue to sit in the queue. Any ideas or advice would be greatly appreciated. Thanks!

  Read the article

• OC'ing a Sapphire 7950, problems with memory clock

  - by Cliff

  I bought a new rig with sapphire radeon 7950 flex w/ boost. Good scores initially in 3dmark 11, around 7300 stock. Problem is, as soon as i start overclocking, issues arise. the core clock is at 860, but rises to 925 with boost applied in pressured situations. So all the OC tools are showing 925 as base clock for some reason. Ocing the core clock has been no problem though, got up to 1200 pretty stable, but only an incremental increase in 3dmark 11, to 7600 from 7300, which is worrying. The real trouble starts when i start touching the memory clock. As soon as i touch it even by 1 point up to 1251mhz, the performance goes way down. suddenly i score under 5000 graphics in 3dmark11, no matter if its 1251hz or 1500hz. Ive tried adjusting every other parameter, different tools (sapphiretrixx, catalyst, afterburner) all still the same. Tried upping the power, still same. Where is the issue here?

  Read the article

• What does Apache's "Require all granted" really do?

  - by John Crawford

  I've just update my Apache server to Apache/2.4.6 which is running under Ubuntu 13.04. I used to have a vhost file that had the following: <Directory "/home/john/development/foobar/web"> AllowOverride All </Directory> But when I ran that I got a "Forbidden. You don't have permission to access /" After doing a little bit of googling I found out that to get my site working again I needed to add the following line "Require all granted" so that my vhost looked like this: <Directory "/home/john/development/foobar/web"> AllowOverride All Require all granted </Directory> I want to know if this is "safe" and does not bring in any security issues. I read on Apache's page that this "mimics the functionality the was previously provided by the 'Allow from all' and 'Deny from all' directives. This provider can take one of two arguments which are 'granted' or 'denied'. The following examples will grant or deny access to all requests." But it didn't say if this was a security issue of some sort or why we now have to do it when in the past you did not have to.

  Read the article

• Excel fails to open Python-generated CSV files

  - by johnjdc

  I have many Python scripts that output CSV files. It is occasionally convenient to open these files in Excel. After installing OS X Mavericks, Excel no longer opens these files properly: Excel doesn't parse the files and it duplicates the rows of the file until it runs out of memory. Specifically, when Excel attempts to open the file, a prompt appears that reads: "File not loaded completely." Example of code I'm using to generate the CSV files: import csv with open('csv_test.csv', 'wb') as f: writer = csv.writer(f) writer.writerow([1,2,3]) writer.writerow([4,5,6]) Even the simple file generated by the above code fails to load properly in Excel. However, if I open the CSV file in a text editor and copy/paste the text into Excel, parse it with text to columns, and then save as CSV from Excel, then I can reopen the CSV file in Excel without issue. Do I need to pass an additional parameter in my scripts to make Excel parse the CSV files the same way it used to? Or is there some setting I can change in OS X Mavericks or Excel? Thanks.

  Read the article

• My Computer hangs for a few minutes just after startup, and then is fine.

  - by EvilChookie

  So I just built myself a reasonably beefy computer, and I installed Windows 7 on it. However, I start the machine up each morning and within a few minutes, the computer will semi hang. That is the mouse is responsive, and most of the time I can open task manager, or a new tab in Chrome. Occasionally windows will be labelled as 'Not responding'. Then, the machine will get over it's problem, and will be nice and quick until I turn it off. Here's my specs: CPU: AMD Phenom-II X4 955 Black (Quad Core, 3.2ghz) RAM: 4GB of DDR3 1300 MOBO: ASUS M4A785T-M (Latest BIOS) HARD DRIVES: 2x1TB Western Digital Caviar Blacks in RAID-0. OS: Windows 7 Ultimate x64. GPU: ASUS GT240 1GB. I believe this issue relates to the RAID array, as I didn't have the lockup problem before I created the array. I purchased a second drive and reformatted after creating a RAID array, since the single drive was a little on the pokey side (compared to the rest of the computer). What I have tried: Updated Raid Drivers Malware checks Windows Updates Unecessary Services CPU and Disk activity appears to be low (via Resource Monitor) No strange errors in the error log. Any thoughts?

  Read the article

• grep command is not search the complete pattern

  - by Sumit Vedi

  0 down vote favorite I am facing a problem while using the grep command in shell script. Actually I have one file (PCF_STARHUB_20130625_1) which contain below records. SH_5.55916.00.00.100029_20130601_0001_NUC.csv.gz|438|3556691115 SH_5.55916.00.00.100029_20130601_0001_Summary.csv.gz|275|3919504621 SH_5.55916.00.00.100029_20130601_0001_UI.csv.gz|226|593316831 SH_5.55916.00.00.100029_20130601_0001_US.csv.gz|349|1700116234 SH_5.55916.00.00.100038_20130601_0001_NUC.csv.gz|368|3553014997 SH_5.55916.00.00.100038_20130601_0001_Summary.csv.gz|276|2625719449 SH_5.55916.00.00.100038_20130601_0001_UI.csv.gz|226|3825232121 SH_5.55916.00.00.100038_20130601_0001_US.csv.gz|199|2099616349 SH_5.75470.00.00.100015_20130601_0001_NUC.csv.gz|425|1627227450 And I have a pattern which is stored in one variable (INPUT_FILE_T), and want to search the pattern from the file (PCF_STARHUB_20130625_1). For that I have used below command INPUT_FILE_T="SH?*???????????????US.*" grep ${INPUT_FILE_T} PCF_STARHUB_20130625_1 The output of above command is coming as below PCF_STARHUB_20130625_1:SH_5.55916.00.00.100029_20130601_0001_US.csv.gz|349|1700116234 I have two problem in the output, first is, only one entry is showing in output (It should contain two entries) and second problem is, output contains "PCF_STARHUB_20130625_1:" which should not be came. output should come like below SH_5.55916.00.00.100029_20130601_0001_US.csv.gz|349|1700116234 SH_5.55916.00.00.100038_20130601_0001_US.csv.gz|199|2099616349 Is there any technique except grep please let me know. Please help me on this issue.

  Read the article

• installed mysql using yum but mysqld dowsnt start: Fedora 16

  - by Sumit Singh Bir

  i installed mysql mysql-server and mysql-libs ... after installation i thought to start the mysql service using command systemctl start mysqld.service Failed to issue method call: Unit mysqld.service failed to load: Invalid argument. See system logs and 'systemctl status mysqld.service' for details. systemctl status mysqld.service this said that it had an invalid argument then i changed the content of mysqld.service with this File: /etc/systemd/system/mysqld.service [Unit] Description=MySQL database server After=syslog.target After=network.target [Service] User=mysql Group=mysql ExecStart=/usr/sbin/mysqld --pid-file=/var/run/mysqld/mysqld.pid ExecStop=/bin/kill -15 $MAINPID PIDFile=/var/run/mysqld/mysqld.pid # We rely on systemd, not mysqld_safe, to restart mysqld if it dies Restart=always # Place temp files in a secure directory, not /tmp PrivateTmp=true [Install] WantedBy=multi-user.target now i found that the error for invalid argument was resolved and mysqld.service was loaded but not enabled ... using systemctl start mysqld.service worked fine ... it workedddd! but then enabling it systemctl enable mysqld.service or service mysqld start did not do anything but the curdor kept on blinking after i pressed enter ... now the thing is that for this f16 i wasted my HDD space for development work and i cannot figure out a way ... please somebody help

  Read the article

• BSOD: PFN_LIST_CORRUPT and IRQ_NOT_LESS_OR_EQUAL

  - by David Lively

  I built a desktop about a year ago that has, until a few weeks ago, been running without a hitch using Windows 7 Ultimate. Recently, the PC started occasionally rebooting with a blue screen indicating a "PFN_LIST_CORRUPT" error. Also, I've seen at least once the error IRQ_NOT_LESS_OR_EQUAL. I seem to remember temporarily connecting an internal DVD burner about the same time this happened. I burned a DVD for another machine and promptly removed the drive. Yesterday, I reformatted the drive and installed Win7 Ultimate x64. During the first install, the PFN_LIST_CORRUPT bluescreen reared its ugly head again. A second install attempt completed with no errors. The fact that this error happened during a clean install leads me to believe that this is not a driver or OS issue. I also ran the memory diagnostic from the Win7 32-bit install DVD. It completed both passes with no errors. Periodically, the screen will flicker, as if explorer or the video are resetting. In the event log, I see a series of 8 or so errors indicating that some services unexpectedly stopped, and were apparently reset. These include an HID service and some others (I don't have a list in front of me). The PC is a Phenom X2 3 Ghz with a 500GB Seagate drive, 4GB of Corsair XMS2 cm2x2048-6400c5c. Anyone know what would suddenly cause a couple of sticks of RAM to go bad?

  Read the article

• How To Replace Laptop HDD Without Losing Data?

  - by Ishan

  Hello, I recently went to Dell Service center and they tell that HDD is faulty and needs to be replaced. I have a Studio 1457 laptop with 500 GB HDD and don't want to lose the data(purchased in May 2010, still under warranty). I have searched a bit and I think it may be best to use a disk imaging software for this task. However, I don't know about a good software. I have following steps in mind: Get a 1 TB External HDD. Make an image of existing 500 GB HDD and store data on external disk. Install new HDD and install a brand new Windows copy and then install the software on it. Using the same software I used to make image, restore the old HDD image on new one. However, I have some questions in mind. First, is this possible? Second, I live in a country where piracy is a big issue and I am sure the support executive who will come to change HDD will have a pirated copy. But I have genuine Windows 7 Pro and don't want to lose it. Now, Dell does not supply and OS disks, so I can't install it on new HDD! If I follow above steps, which version of Windows 7 will be retained? One in the image(authentic) or one in the new HDD(pirated). I am ready to purchase a good software for this task and my budget is $50-60. Since laptop is under warranty, new HDD will be free. One last thing, I have created a Windows Migration file whose size is 70 GB. Can it be used to move from Windows 7 Pro to Windows 7 Pro?(In case I get a genuine copy of Windows 7!) Any other method to save all the data? Thanks in advance.

  Read the article

• How to remove Character Style in Word 2003

  - by joe

  I am copying text into a Word document that has its styles protected. Some of the text has a Character style applied to it that I would like to remove. I can change the style and it looks okay visually, but when you click inside the text itself you can see in the style menu that the Character style is still applied. I try to change the style using the style drop down but the Character style won't go away even if I change it to the Paragraph style. Does anyone know what I am talking about and/or have any techniques for removing Character styles? I am looking forward to your responses. Let me know if I need to clarify. Thanks! UPDATE: My issue is that the Paragraph style is changing correctly, but the Character style remains applied even though the text is displayed as if the style is not applied. See http://office.microsoft.com/en-us/word/HA011876141033.aspx if you are not sure what I meen by Character styles. There are four types of styles — paragraph, character, list, and table (list and table styles are new as of Word 2002). However, the majority of styles you'll use are paragraph styles.

  Read the article

• Integrating Nagios with a ticketing system/incident mnagement system

  - by sektor

  Is there a free ticketing system/incident management system which will help me in achieving the following? 1) If a service goes down then Nagios alerts the on-duty staff and pushes the status to some backend or DB as a ticket, say the initial status is "New". 2) The on-duty staff logs in through a frontend and acknowledges the new ticket by marking it as "In progress", so now the status of the ticket changes from "New" to "In progress". 3) If even after "n" number of minutes no person from on-duty staff has changed the ticket status to "In progress" then Nagios alerts the next level of contacts. Although if the on-duty staff has acknowledged the ticket then there is no need to alert the next level. 4) When the service comes up Nagios closes the ticket by marking it "Closed" Now I already have Nagios monitoring set up and currently it alerts by sending text messages and mails, what I'm looking for is some framework which only escalates the issue(alerts the second level) if the first level(on-duty staff) fails to respond to the initial alert. By "responding to the alert" I mean, the on-duty staff can login via some frontend and basically change the status to something like "Acknowledged" or "In progress".

  Read the article

< Previous Page | 779 780 781 782 783 784 785 786 787 788 789 790  | Next Page >