Search Results

Search found 26810 results on 1073 pages for 'fixed point'.

Page 783/1073 | < Previous Page | 779 780 781 782 783 784 785 786 787 788 789 790  | Next Page >

• Designing Snake AI

  - by Ronald

  I'm new to this gamedev stackechange but have used the math and cs sites before. So, I'm in a competition to create AI for a snake that will compete with 3 other snakes in 5 minute rounds where the rules are much like the traditional Nokia snake game except that there are 4 snakes, the board is 50x50 and there are a number of small obstacles on the field. Like the Nokia game, your snake grows when you get to the fruit and if you crash into yourself, another snake or the wall you die. The game runs with a 50ms delay between moves and the server sends the new game state every 50ms which the code must analyze and what not and output the next move. The winner is the snake who had the longest length at any point in the game. Tie breakers are decided by kills. So far what I have done is implemented an A* graph search from each snake to determine if my snake is the closest to the apple and if it is, it goes for the apple. Otherwise, I made a neat little algorithm to determine the emptiest area of the board, which my snake goes for, to anticipate the next apple. Other than this I have some small survivability checks to ensure my snake isn't walking into a trap that it can't get out and if it does get stuck, I have something to give it a better chance of getting out. ... Anyway, I've tested my snake on a test server and it does quite well. Generally, my strategy of only going for the apple when its a sure thing and finding space when its not makes it grow faster than any other snakes (some snakes do a similar thing but often just go to the middle or a corner) sometimes it wins these trial games but is more often than not beaten by the same snake who seems to have the edge on survivability(my snake grows quicker but then dies somehow and this other snake just plods slowly along and wins on consistency. So I was wondering about any ideas anyone has to try and improve my snake. Or maybe ideas at a new approach to take. My functions and classes are good so changes that might seem drastic shouldn't be too bad. I encourage all ideas. Any thoughts ??

  Read the article

• How / Where can I host my Java web application? [closed]

  - by Huliax

  Possible Duplicate: How to find web hosting that meets my requirements? In case you want to skip to the crux of my inquiry just read the bold type. I just finished my CS degree (at 39 years old :-)). For my final project I designed and built a system that can provide local positioning / location awareness to mobile wifi devices (only have Android client thus far). The server receives data from clients, processes it, and responds to the clients with a messages containing information about their respective locations. I would like to continue the project (perhaps release as open source but that is a different discussion). Thus far my server application has been running on the CS department's hardware where I could pretty much do whatever I wanted. I'm getting kicked off that system in a few weeks so I have to find a new home for my server application. I need a host that will let me run my Java server (along w/ mySQL db) -- preferably on the cheap since I haven't yet got a job. I have very little experience with the "real world" of web development / hosting. I'm having trouble figuring out what kind of hosting service will let me run my application as is. If that turns out to be a tall order then I need to know what my options are for changing thing so that I can get up and running with some hosting. As an aside, I'm also researching whether or not I should rewrite this in a different language. Trying to figure out if there is a substantially better (for whatever reason) one for what I'm doing. This might also potentially have a bearing on my hosting needs. One possibility is to write the server in something more widely accepted by hosting services. I have been searching for answers to my question and haven't found quite what I'm looking for. Part of the problem might be that I don't know exactly what terminology to use. If there is a good answer to this question elsewhere please feel free to point me towards it. Thanks for help / advice.

  Read the article

• Taking a Projects Development to the Next Level

  - by user1745022

  I have been looking for some advice for a while on how to handle a project I am working on, but to no avail. I am pretty much on my fourth iteration of improving an "application" I am working on; the first two times were in Excel, the third Time in Access, and now in Visual Studio. The field is manufacturing. The basic idea is I am taking read-only data from a massive Sybase server, filtering it and creating much smaller tables in Access daily (using delete and append Queries) and then doing a bunch of stuff. More specifically, I use a series of queries to either combine data from multiple tables or group data in specific ways (aggregate functions), and then I place this data into a table (so I can sort and manipulate data using DAO.recordset and run multiple custom algorithms). This process is then repeated multiple times throughout the database until a set of relevant tables are created. Many times I will create a field in a query with a value such as 1.1 so that when I append it to a table I can store information in the field from the algorithms. So as the process continues the number of fields for the tables change. The overall application consists of 4 "back-end" databases linked together on a shared drive, with various output (either front-end access applications or Excel). So my question is is this how many data driven applications that solve problems essentially work? Each backend database is updated with fresh data daily and updating each takes around 10 seconds (for three) and 2 minutes(for 1). Project Objectives. I want/am moving to SQL Server soon. Front End will be a Web Application (I know basic web-development and like the administration flexibility) and visual-studio will be IDE with c#/.NET. Should these algorithms be run "inside the database," or using a series of C# functions on each server request. I know you're not supposed to store data in a database unless it is an actual data point, and in Access I have many columns that just hold calculations from algorithms in vba. The truth is, I have seen multiple professional Access applications, and have never seen one that has the complexity or does even close to what mine does (for better or worse). But I know some professional software applications are 1000 times better then mine. So Please Please Please give me a suggestion of some sort. I have been completely on my own and need some guidance on how to approach this project the right way.

  Read the article

• Frame rate on one of two machines running same code seems to be capped at 60 for no reason

  - by dennmat

  ISSUE I recently moved a project from my laptop to my desktop(machine info below). On my laptop the exact same code displays the fps(and ms/f) correctly. On my desktop it does not. What I mean by this is on the laptop it will display 300 fps(for example) where on my desktop it will show only up to 60. If I add 100 objects to the game on the laptop I'll see my frame rate drop accordingly; the same test on the desktop results in no change and the frames stay at 60. It takes a lot(~300) entities before I'll see a frame drop on the desktop, then it will descend. It seems as though its "theoretical" frames would be 400 or 500 but will never actually get to that and only do 60 until there's too much to handle at 60. This 60 frame cap is coming from no where. I'm not doing any frame limiting myself. It seems like something external is limiting my loop iterations on the desktop, but for the last couple days I've been scratching my head trying to figure out how to debug this. SETUPS Desktop: Visual Studio Express 2012 Windows 7 Ultimate 64-bit Laptop: Visual Studio Express 2010 Windows 7 Ultimate 64-bit The libraries(allegro, box2d) are the same versions on both setups. CODE Main Loop: while(!abort) { frameTime = al_get_time(); if (frameTime - lastTime >= 1.0) { lastFps = fps/(frameTime - lastTime); lastTime = frameTime; avgMspf = cumMspf/fps; cumMspf = 0.0; fps = 0; } /** DRAWING/UPDATE CODE **/ fps++; cumMspf += al_get_time() - frameTime; } Note: There is no blocking code in the loop at any point. Where I'm at My understanding of al_get_time() is that it can return different resolutions depending on the system. However the resolution is never worse than seconds, and the double is represented as [seconds].[finer-resolution] and seeing as I'm only checking for a whole second al_get_time() shouldn't be responsible. My project settings and compiler options are the same. And I promise its the same code on both machines. My googling really didn't help me much, and although technically it's not that big of a deal. I'd really like to figure this out or perhaps have it explained, whichever comes first. Even just an idea of how to go about figuring out possible causes, because I'm out of ideas. Any help at all is greatly appreciated.

  Read the article

• Does it make the game more fun when the user is forced to progress through the levels sequentially rather than letting them pick and play?

  - by BeachRunnerJoe

  Hello. For the first time in my game, I'm stuck with a real design dilemma. I guess that's a good thing ;) I'm building a word puzzle game that has five levels, each with 30 puzzles. Currently, the user has to solve one puzzle at a time before moving to the next. However, I'm finding the user occasionally gets stuck on a puzzle, at which point they can no longer play until they solve it. This is obviously bad because many people will probably just quit playing the game and delete the app. The only elegant solution I can find to helping the player get unstuck is changing the design of the game to allow the users to pick any puzzle to play at any time. This way, if they get stuck, they can come back to it later and at least they have other puzzles to play in the meantime. It's my opinion, however, that this new flow design doesn't make the game as fun as the original flow design where the player has to complete a puzzle before moving to the next. To me, it's like anything else, when you only have one of something, it's more enjoyable, but when you have 30 of something, it's far less enjoyable. In fact, when I present the user with 30 puzzles to choose from, I'm concerned I might be making them feel like it's a lot of work they have to do and that's bad. I even had a tester voluntarily tell me that being forced to complete a puzzle before moving to the next is actually motivating. My questions are... Do you agree/disagree? Do you have any suggestions for how I can help the player get unstuck? Thanks so much in advance for your thoughts! EDIT: I should mention that I've already considered a few other solutions to helping the user get unstuck, but none of them seem like good ideas. They are... Add more hints: Currently, the user gets two hints per puzzle. If I increase the hint count, it only makes the game more easy and still leaves the possibility of the user getting stuck. Add a "Show Solution" button: This seems like a bad idea because it's my opinion this takes the fun out of the game for many people who would probably otherwise solve the puzzle if they didn't have the quick option to see the solution.

  Read the article

• What are different ways to reduce latency between a server and a web application? [closed]

  - by jjoensuu

  this is a question about a web application that provides SOAP web services. For the sake of this question, this web app is hosted on a server SERVER B which is located in California. We have an automated, scheduled, process running on a server SERVER A, located in New York. This scheduled process is supposed to send SOAP messages to SERVER B every so often, but this process typically dies soon after starting. We have now been told by the vendor that reason why the process dies is because of the latency between SERVER A and SERVER B. The data traffic is routed through many diffent public networks. There is no dedicated line between SERVER A and SERVER B. As a result I have been asked to look into ways to reduce the latency between SERVER A and SERVER B. So I wanted to ask, what are the different ways to reduce latency in a situation like this? For example, would it help to switch from HTTPS to some other secure protocol? (the thought here is that perhaps some other alternative would require fewer handshakes than HTTPS). Or would a VPN help? If a VPN would reduce the latency, how would it do that? NOTE: I am not looking for an explicit answer that would work in my specific situation. I am more like looking just for a simple list of what technologies could be used for this. I will still have to evaluate the technologies and discuss them internally with others, so the list would just be a starting point. Here I am assuming that there exists very few ways to reduce latency between two servers that communicate across public networks using HTTPS. Feel free to correct me if this assumption is wrong and please ask if there is a need for specific information. NOTE 2: A list of technologies is a specific answer to the question I stated in the title. NOTE 3: Its rather dumb to close this question when it is after all about me looking for information and furthermore this information can clearly be useful for others. Anyway luckily there are other sites where I can ask around. StackExchange seems to attached to their own philosophical principles. Many thanks

  Read the article

• Weird Ubuntu Desktop Boot Partition On External Hard Drive

  - by Magnitus

  I have a Thinkpad with Windows 7. Last time I installed an Ubuntu/Windows dual boot, Windows was never same after and regularly got corrupted so this time, I installed Ubuntu on a separate external hard drive. I took a 500 GB external hard drive and used Windows to shrink the partition on it to 400 GB, freeing 100 GB to install Ubuntu. Then I modified the booting priority of my computer to boot from the external hard drive if present. Then, I installed Ubuntu desktop on the external hard drive using a DVD, picked the most simplistic partitioning scheme I could get away with (didn't go auto as it didn't include the external hard drive as a choice) and voilà. Fast forward some time and I'm trying to refresh my understanding of Linux partitions to install a bunch of servers, so I'm looking at the current partitioning scheme on my external hard drive and find the boot partition puzzling... sda is my integrated hard drive with Windows 7. sdb is my Ubuntu desktop external hard drive. Running parted on sdb, I get this: (parted) print Model: WD My Passport 0740 (scsi) Disk /dev/sdb: 500GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 393GB 393GB primary ntfs boot 2 393GB 500GB 107GB extended 5 393GB 425GB 32.8GB logical linux-swap(v1) 6 425GB 500GB 74.6GB logical ext4 At this point, I'm wondering why the ntfs partition is flagged as "boot" and not my ext4 partition which is the partition that contains / (and by extension, /boot since it's not on its own separate partition). Looking at mtab only confirms what I already know: eric@eric-ThinkPad-W530:~$ sudo cat /etc/mtab /dev/sdb6 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/cgroup tmpfs rw 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 none /run/user tmpfs rw,noexec,nosuid,nodev,size=104857600,mode=0755 0 0 none /sys/fs/pstore pstore rw 0 0 systemd /sys/fs/cgroup/systemd cgroup rw,noexec,nosuid,nodev,none,name=systemd 0 0 gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,user=eric 0 0 /dev/sdb1 /media/eric/My\040Passport fuseblk rw,nosuid,nodev,allow_other,default_permissions,blksize=4096 0 0 My lack of understanding concerning this is not vital to anything (this is only my development desktop partition), but somehow annoys me. Any insight that could shed some light on this would be welcome.

  Read the article

• Drawing flaming letters in 3D with OpenGL ES 2.0

  - by Chiquis

  I am a bit confused about how to achieve this. What I want is to "draw with flames". I have achieved this with textures successfully, but now my concern is about doing this with particles to achieve the flaming effect. Am I supposed to create a path along which I should add many particle emitters that will be emitting flame particles? I understand the concept for 2D, but for 3D are the particles always supposed to be facing the user? Something else I'm worried about is the performance hit that will occur by having that many particle emitters, because there can be many letters and drawings at the same time, and each of these elements will have many particle emitters. More detailed explanation: I have a path of points, which is my model. Imagine a dotted letter "S" for example. I want make the "S" be on fire. The "S" is just an example it can be a circle, triangle, a line, pretty much any path described by my set of points. For achieving this fire effect I thought about using particles. So I am using a program called "Particle Designer" to create a fire style particle emitter. This emitter looks perfect on 2D on the iphone screen dimensions. So then I thought that I could probably draw an S or any other figure if i place many particle emitters next to each other following the path described. To move from the 2D version to the 3D version I thought about, scaling the emitter (with a scale matrix multiplication in its model matrix) and then moving it to a point in my 3D world. I did this and it works. So now I have 1 particle emitter in the 3D world. My question is, is this how you would achieve a flaming letter? Is this too inefficient if i expect to have many flaming paths on my world? Am i supposed to rotate the particle's quad so that its always looking at the user? (the last one is because i noticed that if u look at it from the side the particles start to flatten out)

  Read the article

• What ever happened to the Defense Software Reuse System (DSRS)?

  - by emddudley

  I've been reading some papers from the early 90s about a US Department of Defense software reuse initiative called the Defense Software Reuse System (DSRS). The most recent mention of it I could find was in a paper from 2000 - A Survey of Software Reuse Repositories Defense Software Repository System (DSRS) The DSRS is an automated repository for storing and retrieving Reusable Software Assets (RSAs) [14]. The DSRS software now manages inventories of reusable assets at seven software reuse support centers (SRSCs). The DSRS serves as a central collection point for quality RSAs, and facilitates software reuse by offering developers the opportunity to match their requirements with existing software products. DSRS accounts are available for Government employees and contractor personnel currently supporting Government projects... ...The DoD software community is trying to change its software engineering model from its current software cycle to a process-driven, domain-specific, architecture-based, repository-assisted way of constructing software [15]. In this changing environment, the DSRS has the highest potential to become the DoD standard reuse repository because it is the only existing deployed, operational repository with multiple interoperable locations across DoD. Seven DSRS locations support nearly 1,000 users and list nearly 9,000 reusable assets. The DISA DSRS alone lists 3,880 reusable assets and has 400 user accounts... The far-term strategy of the DSRS is to support a virtual repository. These interconnected repositories will provide the ability to locate and share reusable components across domains and among the services. An effective and evolving DSRS is a central requirement to the success of the DoD software reuse initiative. Evolving DoD repository requirements demand that DISA continue to have an operational DSRS site to support testing in an actual repository operation and to support DoD users. The classification process for the DSRS is a basic technology for providing customer support [16]. This process is the first step in making reusable assets available for implementing the functional and technical migration strategies. ... [14] DSRS - Defense Technology for Adaptable, Reliable Systems URL: http://ssed1.ims.disa.mil/srp/dsrspage.html [15] STARS - Software Technology for Adaptable, Reliable Systems URL: http://www.stars.ballston.paramax.com/index.html [16] D. E. Perry and S. S. Popovitch, “Inquire: Predicate-based use and reuse,'' in Proceedings of the 8th Knowledge-Based Software Engineering Conference, pp. 144-151, September 1993. ... Is DSRS dead, and were there any post-mortem reports on it? Are there other more-recent US government initiatives or reports on software reuse?

  Read the article

• Why do some user agents have spam urls in them (and why are they always Opera/Presto User-Agents)?

  - by Erx_VB.NExT.Coder

  If you go to (say) the last 100 entries (visits) to the botsvsbrowsers.com website (exact link, feel free to take a look: http://www.botsvsbrowsers.com/recent/listings/index.html ), you'd notice that almost every User Agent that has the keywords "Opera" and "Presto" inside them, will almost certainly have a web link (URL/Web Address) inside it, and it won't just be a normal web address, but a HTML anchor tag/link to that address. Why is this so, I could not even find a single discussion about it on the internet, nowhere, I tried varying my search terms many times. If the user agent contains the words "Opera" and "Presto" it doesnt mean it will have this weblink, but it means there is about an 80% change that it will. A typical anchor tag/link inside a user agent will look like this: Mozilla/4.0 <a href="http://osis-uk.co.uk/disabled-equipment">disability equipment</a> (Windows NT 5.1; U; en) Presto/2.10.229 Version/11.60 If you check it out at the website, http://www.botsvsbrowsers.com/recent/listings/index.html you will notice that the back and forward arrows are in there unescaped format. This isn't just true for botsvsbrowsers, but several other user agent listing sites. I'm really confused and feel line I'm in a room full of 10,000 people and am the only one seeing this ghost :). If I'm doing statistical analysis, should I include or exclude this type of user agent from my listing (ie: are these just normal users who've set their user agents to attempt to drive some traffic to their sites as they browser the web), or is there something else going on? The fact that it is so consistent in terms of its format leads me to believe that it is an automated process (the setting or alteration of the user agent) so I cannot decide or understand the process by which this change is made (I know how to change a user agent), but unsure which program or facility is doing this, especially since it is exclusive to Opera (Presto) user agents that are beyond I think an 8 or 9 point something browser version. I've run some statistical tests, parsing entries from all over the place, writing custom programs, to get a better understanding of this. Keep in mind that I see normal URL's in user agents infrequently, they are just text such as +http://www.someSite.com appended to a user agent normally, especially if its a crawler or bot it provided its service URL, this is normal and isnt done with an embedded link (A HREF=) etc, so I'm not talking about "those".

  Read the article

• Office lights on or off in programming department? How to decide? [closed]

  - by smp7d

  At my company, the programmers who sit in the same area are constantly fighting over whether the lights stay on or off. Because there is no official policy it makes it a particularly sticky situation. We are a typical cube-farm and we have those typical cube-farm fluorescent lights and smaller ones at our desks. With the lights off, it is difficult to read and you would probably need to turn on your desk light (which some people do anyway). All programmers in our department do most of their reading on their monitor because of the nature of our business. Some feel that we should have a vote to decide whether the lights stay on or off. A couple who prefer 'lights on' feel that the vote would need to be unanimous to turn them off as having them on is the more natural office setting. Those who want them off point out that all other departments keep their lights off. I have heard all of the arguments: -Fluorescent lights cause eye strain -Reading in dark causes eye strain -The desk lights can be used if light is needed -People from other departments feel uncomfortable approaching us in the "dark" -The monitors are harder to see in the light ... Right now, some of the developers turn off the lights and some turn them on. It really just depends who last walked by the switch. I am a bit sick of the controversy as it feels a bit childish at the moment. I'm tired of hearing about it and I'm tired of having to talk about it. I tried to help them decide but as I explained, voting wasn't enough. Do other programming departments have this same argument? What is the standard or traditionally accepted option in a programming area? Are there any good reasons for one way or the other outside of preference? How can we decide fairly? EDIT Just a little more info... We do not have clients/visitors come into our office. We do have windows and hall lights that make our environment plenty bearable with the lights off. It kind of resembles a meeting room that has the lights off during a powerpoint presentation.

  Read the article

• NVIDIA Additional Drivers Empty - maximum resolution 640x480 - Driver disappears

  - by Hannibal

  EDIT: Optimus card. For resolution please read this thread: "You do not appear to be using the nvidia x server"(screenshot included) And this: Ubuntu 11.10 problem with Nvidia Thanks! I know, I know yet another NVIDIA question. So I did all the research. I uninstalled and installed nvidia-settings and drivers and nvidia-current from PPE repositories which are the most updated ones. I executed nvidia-xconfig. I have two major problems. One: Additional Drivers setting is empty! It doesn't contain any driver although one is installed. I have executed apt-get update too. But still the list is empty. Two: If I execute nvidia-xconfig it will properly configure an xorg.conf file. I restart but the maximum resolution I got is 640x480. I tried the xrandr but I can't add any resolution to display LVDS1. Some weird error occurs. So I can't add a proprietary driver and I can't boot in with the xorg file created by Nvidia... What can I do? With some work ( unistall nvidia-current and install libgl1-mesa-glx I was able to activate some kind of usage of my card because the resolution got better... and I added bumbelbee to because I have multiple video cards... ) but still the list is empty. I don't know what to do at this point??!!! Also: this is the most important part. When I first installed my ubuntu yesterday 11.10 one I saw the driver!! The driver was there... And then I ofc updated every package from internet.. And after that it was gone. And I can't bring it back. So there must be something wrong with one of the updates. But which???? Thanks for any extra info you can provide! I'm really desperate to solve this issue.

  Read the article

• password incorrect 3 times + suspected failed update

  - by Cheese

  I have been lurking your site for the past few hours, and have found myself in a bit of a pickle. Visiting my parents, I discover that neither computer, nor laptop work. Long story short, I've got the laptop working, but have completely fudged up the computer. I am a n00b, but I was at least willing to give it a go. The comp originally had ubuntu 11.10 installed, later updated to 12.04. We have cds for both. I do not understand what the initial problem was for my parents, but somehow when I turned on the computer, it worked for me. Soon after, I was nagged to install the latest updates. So, I spent the next half an hour wondering why the updates kept on asking for 11.04 cdroms, until I realised that you could turn off the cdrom necessity. After doing this via console, I installed some of the smaller updates, before being told to do a partial update. This failed a few times, and ended up freezing whilst reinstalling drivers. After a hard restart I continued to type whatever I could find on the forum into the console. At some point, the console started saying that I had 3 incorrect password inputs, and sudo commands stopped altogether. I found another thread discussing this; but people kept on suggesting changing passwords (which I did to no avail) or other things that made use of sudo (which I am locked out of, although I am technically the admin) I found myself somehow on the Ctrl+Alt+F1 console, and after being utterly confused (and Ctrl+AltF5 failing for me), another hard reset occurred. Somewhere along the way I created a USB start up for 14.04, (but this does not seem to work) Now I am left with an admin (and guest) account that log in but have blank screens (with only the desktop background showing) and I can't do anything in the console because I'm locked out. Interestingly, the console now says that I am running 14.04 although all updates said they had failed. Aside from the obvious lessons I have learnt (don't fiddle about in the console when you have no idea what you're doing "Dog wearing safety glasses "I have no idea what I am doing" GIF would be inserted here ) Is there any way I can redeem this almighty muck up? A million thanks for any help!

  Read the article

• Cannot boot from K/Ubuntu install disk on my UEFI system

  - by user93241

  I just got a new system and have been trying to get it set up w/ Win7 & Kubuntu dual-boot, but I've got a major problem. The BIOS of my motherboard (an Asus Crosshair 990FX) is strictly UEFI -- there is no legacy support mode available. I've been reading up on how to get Kubuntu installed in UEFI mode but no matter what I try I cannot seem to even boot into my install CD/USB key properly. I can get as far as the selection screen ("Try Kubuntu", "Install Kubuntu"...) but this screen starts off not appearing correctly. If I try moving the cursor around it sometimes seems to correct itself and show me my choices. But once I select "Try Kubuntu" it starts loading, the screen goes black and then proceeds to flicker -- about once every 5-10 seconds or so. This continues indefinitely. I've tried this with both Kubuntu & Ubuntu installation media, even the AMD64+Mac Ubuntu variety that is supposed to be a lot more flexible w.r.t. UEFI. The only hint I've had that the system might have booted correctly is a little drum sound that plays when booting from the Ubuntu install disk. Well, that and the fact that when I hit my system's power button it seems to shut down correctly, even ejecting the CD at the end. This might be a video driver issue; my system has two nVidia 550's, one of which is attached to my primary monitor. (The secondary isn't hooked up yet.) I'll keep looking over similar questions but any advice would be greatly appreciated. UPDATE: I've tried booting into my 12.04 install CD twice now, each time using two different options supplied by my BIOS. One seemed to offer the ability to boot into my CD under UEFI mode -- this didn't even produce the initial boot menu. The other method offers the ability to boot into my CD NOT under UEFI mode. This DOES produce the boot menu, but after this point it seems I still cannot get to a proper video mode to see what's going on.

  Read the article

• "You are missing the following 32-bit libraries, and Steam may not run: libc.so.6" The common fixes don't work,

  - by M_Steam_User

  So I know this is a problem that has been asked around a lot, but I've tried a bunch of solutions with no success. I'm running Ubuntu 12.04 (64 bit), and I just installed it yesterday. This is my first time working with linux. The error is: You are missing the following 32-bit libraries, and Steam may not run: libc.so.6 Things I've tried. First, I had downloaded from the steam website. I uninstalled it, and tried again from the ubuntu software centre. sudo apt-get update sudo apt-get install ia32-libs sudo apt-get upgrade This installed a bunch of the 32 bit libraries, but did not fix the issue. This seems like the major fix for most people. The direct approach of sudo apt-get install libc.so.6 returns this: Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package libc.so.6 E: Couldn't find any package by regex 'libc.so.6' I guess libc.so.6 isn't a package, just a single file or something? I also tried gksudo gedit /etc/ld.so.conf.d/steam.conf Added these two lines, those the second one was all ready in the file, but copied over: /usr/lib32 /usr/lib/i386-linux-gnu/mesa Then executed: sudo ldconfig But nothing seemed to happen, steam still doesn't work. So, I feel like it is more likely that I have the library and steam isn't looking in the right place. One thing I've seen is people usually reference /usr/local/lib/ for your library locations. However, I can't find where to cd into /usr/, it isn't in my home folder. If /usr/ is the home folder, there is only a /.local folder which only has /share, no lib anywhere. Sorry for my linux ignorance. I appreciate any help, I honestly have no idea how to confirm I have the library and point steam to it, or if that is even the right thing to do. Edit: Tried this, not entirely sure what it means ~$ ls -l /lib32/libc* -rwxr-xr-x 1 root root 1721832 Sep 30 11:06 /lib32/libc-2.15.so -rw-r--r-- 1 root root 185928 Sep 30 11:06 /lib32/libcidn-2.15.so lrwxrwxrwx 1 root root 15 Sep 30 11:06 /lib32/libcidn.so.1 -> libcidn-2.15.so -rw-r--r-- 1 root root 34316 Sep 30 11:06 /lib32/libcrypt-2.15.so lrwxrwxrwx 1 root root 16 Sep 30 11:06 /lib32/libcrypt.so.1 -> libcrypt-2.15.so lrwxrwxrwx 1 root root 12 Sep 30 11:06 /lib32/libc.so.6 -> libc-2.15.so

  Read the article

• Damaged external NTFS hard disk

  - by Thanos

  A few days ago, I used my external hard disk (a 2TB Seagate) in order to transfer some files on Windows Vista. During that, I noticed some malfunctions on my system (it was running too slow, Windows Explorer crashed). When Explorer crashed, file transportation stopped. I was afraid, but I tried to access my files and it seemed to be working. I tried to open a movie (from the external disk) but it couldn't load. I thought of restarting, but this took sooo long... So I unplugged the hard disk and at that time it managed to shut down. I logged on to Windows Vista but the hard disk couldn't be mounted. I plugged it but nothing happened. I unplugged it and I heard this specific sound that notifies that something has been unplugged. I thought of logging to Ubuntu 10.04 and see what I can do. I plugged the hard disk, but I couldn't see it. I opened GParted but I couldn't see it either. I tried with Disc Utility and there it was! I tried to mount it but a got an error message stating that an error occured with Windows, there is a file (0,0) that has problem or something like that. It suggested to log into Windows and run chkdsk /f and reboot twice. The thing is that I am somehow afraid to do so because I don't really know the impact on that. Plus I don't trust doing even a check on Vista... I finally risked it and I typed chkdsk/f on a cmd. I cannot, however, actually run it because I don't have admin privileges. So from search I found chkdsk, I right cliked and selected “run as administrator”. It run but I got a message like NTFS file system. It should check at the coming restart. At that point I am mistaken. I thought that f meant F but this is not the case here... Does anyone have any suggestions and advice?

  Read the article

• Cloud Computing Business Benefits

  - by workflowman

  If you have been living under a rock for the past year, you wouldn't have heard about cloud computing. Cloud computing is a loose term that describes anything that is hosted in data centers and accessed via the internet. It is normally associated with developers who draw clouds in diagrams indicating where services or how systems communicate with each other. Cloud computing also incorporates such well-known trends as Web 2.0 and Software as a Service (SaaS) and more recently Infrastructure as a Service (IaaS) and Platform as a Service (PaaS). Its aim is to change the way we compute, moving from traditional desktop and on-premises servers to services and resources that are hosted in the cloud.  Benefits of Cloud Computing  There are clearly benefits in building applications using cloud computing, some of which are listed here:  Zero up- front investment:  Delivering a large-scale system costs a fortune in both time and money. Often IT departments are split into hardware/network and software services. The hardware team provisions servers and so forth under the requirements of the software team. Often the hardware team has a different budget that requires approval. Although hardware and software management are two separate disciplines, sometimes what happens is developers are given the task to estimate CPU cycles, disk space, and so forth, which ends up in underutilized servers.  Usage-based costing:  You pay for what you use, no more, no less, because you never actually own the server. This is similar to car leasing, where in the long run you get a new car every three years and maintenance is never a worry.  Potential for shrinking the processing time:  If processes are split over multiple machines, parallel processing is performed, which decreases processing time.  More office space:  Walk into most offices, and guaranteed you will find a medium- sized room dedicated to servers.  Efficient resource utilization:  The resource utilization is handed by a centralized cloud administrator who is in charge of deciding exactly the right amount of resources for a system. This takes the task away from local administrators, who have to regularly monitor these servers.  Just-in-time infrastructure:  If your system is a success and needs to scale to meet demand, this can cause further time delays or a slow- performing service. Cloud computing solves this because you can add more resources at any time.  Lower environmental impact:  If servers are centralized, potentially an environment initiative is more likely to succeed. As an example, if servers are placed in sunny or windy parts of the world, then why not use these resources to power those servers?  Lower costs:  Unfortunately, this is one point that administrators will not like. If you have people administrating your e-mail server and network along with support staff doing other cloud-based tasks, this workforce can be reduced. This saves costs, though it also reduces jobs.

  Read the article

• git workflow for separating commits

  - by gman

  Best practices with git (or any VCS for that matter) is supposed to be to have each commit do the smallest change possible. But, that doesn't match how I work at all. For example I recently I needed to add some code that checked if the version of a plugin to my system matched the versions the system supports. If not print a warning that the plugin probably requires a newer version of the system. While writing that code I decided I wanted the warnings to be colorized. I already had code that colorized error message so I edited that code. That code was in the startup module of one entry to the system. The plugin checking code was in another path that didn't use that entry point so I moved the colorization code into a separate module so both entry points could use it. On top of that, in order to test my plugin checking code works I need to go edit UI/UX code to make sure it tells the user "You need to upgrade". When all is said and done I've edited 10 files, changed dependencies, the 2 entry points are now both dependant on the colorization code, etc etc. Being lazy I'd probably just git add . && git commit -a the whole thing. Spending 10-15 minutes trying to manipulate all those changes into 3 to 6 smaller commits seems frustrating which brings up the question Are there workflows that work for you or that make this process easier? I don't think I can some how magically always modify stuff in the perfect order since I don't know that order until after I start modifying and seeing what comes up. I know I can git add --interactive etc but it seems, at least for me, kind of hard to know what I'm grabbing exactly the correct changes so that each commit is actually going to work. Also, since the changes are sitting in the current directory it doesn't seem like it would be easy to run tests on each commit to make sure it's going to work short of stashing all the changes. And then, if it were to stash and then run the tests, if I missed a few lines or accidentally added a few too many lines I have no idea how I'd easily recover from that. (as in either grab the missing lines from the stash and then put the rest back or take the few extra lines I shouldn't have grabbed and shove them into the stash for the next commit. Thoughts? Suggestions? PS: I hope this is an appropriate question. The help says development methodologies and processes

  Read the article

• Drawing a line using openGL does not work

  - by vikasm

  I am a beginner in OpenGL and tried to write my first program to draw some points and a line. I can see that the window opens with white background but no line is drawn. I was expecting to see red colored (because glColor3f(1.0, 0.0, 0.0);) dots (pixels) and line. But nothing is seen. Here is my code. void init2D(float r, float g, float b) { glClearColor(r,g,b,0.0); glMatrixMode(GL_PROJECTION); gluOrtho2D(0.0, 200.0, 0.0, 150.0); } void display() { glClear(GL_COLOR_BUFFER_BIT); glColor3f(1.0, 0.0, 0.0); glBegin(GL_POINTS); for(int i = 0; i < 10; i++) { glVertex2i(10+5*i, 110); } glEnd(); //draw a line glBegin(GL_LINES); glVertex2i(10,10); glVertex2i(100,100); glEnd(); glFlush(); } int main(int argc, char** argv) { //Initialize Glut glutInit(&argc, argv); //setup some memory buffers for our display glutInitDisplayMode(GLUT_DOUBLE | GLUT_RGB); //set the window size glutInitWindowSize(500, 500); //create the window with the title 'points and lines' glutCreateWindow("Points and Lines"); init2D(0.0, 0.0, 0.0); glutDisplayFunc(display); glutMainLoop(); } I wanted to verify that the glcontext was opening properly and used this code: int main(int argc, char **argv) { glutInit(&argc, argv); //setup some memory buffers for our display glutInitDisplayMode(GLUT_DOUBLE | GLUT_RGB); //set the window size glutInitWindowSize(500, 500); //create the window with the title 'points and lines' glutCreateWindow("Points and Lines"); char *GL_version=(char *)glGetString(GL_VERSION); puts(GL_version); char *GL_vendor=(char *)glGetString(GL_VENDOR); puts(GL_vendor); char *GL_renderer=(char *)glGetString(GL_RENDERER); puts(GL_renderer); getchar(); return 0; } And the ouput I got was: 3.1.0 - Build 8.15.10.2345 Intel Intel(R) HD Graphics Family Can someone point out what I am doing wrong ? Thanks.

  Read the article

• Threads slowing down application and not working properly

  - by Belgin

  I'm making a software renderer which does per-polygon rasterization using a floating point digital differential analyzer algorithm. My idea was to create two threads for rasterization and have them work like so: one thread draws each even scanline in a polygon and the other thread draws each odd scanline, and they both start working at the same time, but the main application waits for both of them to finish and then pauses them before continuing with other computations. As this is the first time I'm making a threaded application, I'm not sure if the following method for thread synchronization is correct: First of all, I use two global variables to control the two threads, if a global variable is set to 1, that means the thread can start working, otherwise it must not work. This is checked by the thread running an infinite loop and if it detects that the global variable has changed its value, it does its job and then sets the variable back to 0 again. The main program also uses an empty while to check when both variables become 0 after setting them to 1. Second, each thread is assigned a global structure which contains information about the triangle that is about to be rasterized. The structures are filled in by the main program before setting the global variables to 1. My dilemma is that, while this process works under some conditions, it slows down the program considerably, and also it fails to run properly when compiled for Release in Visual Studio, or when compiled with any sort of -O optimization with gcc (i.e. nothing on screen, even SEGFAULTs). The program isn't much faster by default without threads, which you can see for yourself by commenting out the #define THREADS directive, but if I apply optimizations, it becomes much faster (especially with gcc -Ofast -march=native). N.B. It might not compile with gcc because of fscanf_s calls, but you can replace those with the usual fscanf, if you wish to use gcc. Because there is a lot of code, too much for here or pastebin, I created a git repository where you can view it. My questions are: Why does adding these two threads slow down my application? Why doesn't it work when compiling for Release or with optimizations? Can I speed up the application with threads? If so, how? Thanks in advance.

  Read the article

• How do I make camera move at same speed when rotating and moving forward

  - by dez

  I made a camera in DX9. To move forward I press the Up arrow. To rotate on the Y axis I use the mouse. When I perform these movements on their own the camera moves at the speed I want. However, if I hold down Up and move the mouse at the same time then the camera moves a lot faster than it should. I want it to move at the same speed as it does when only the Up arrow is pressed. I think I need to normalize something somewhere but not sure what and not sure where. Have tried various combinations without success so if anyone can point me in the right direction that would be great. Thanks. I've post code below. #define KEY_DOWN(vk_code) ((GetAsyncKeyState(vk_code) & 0x8000) ? 1 : 0) LRESULT WINAPI MsgProc( HWND hWnd, UINT msg, WPARAM wParam, LPARAM lParam ) { if( KEY_DOWN(VK_UP)) MovePlayer(D3DXVECTOR3(0, 0, -1.0f)); if( KEY_DOWN(VK_DOWN)) MovePlayer(D3DXVECTOR3(0, 0, 1.0f)); switch( msg ) { case WM_MOUSEMOVE: ProcessMouseInput(); } } void MovePlayer( D3DXVECTOR3 in_vec ) { D3DXMATRIX CameraRot; D3DXMatrixRotationY(&CameraRot,D3DXToRadian(AngleY)); D3DXVECTOR3 CameraRotTarget; D3DXVec3TransformNormal(&CameraRotTarget,&in_vec,&CameraRot); CameraPos += (m_timeElapsed * CameraRotTarget); } void ProcessMouseInput() { GetCursorPos( &CurrentMouseState ); if ((CurrentMouseState.x != GameMouseState.x) || (CurrentMouseState.y != GameMouseState.y)) { int dx = CurrentMouseState.x - GameMouseState.x; int dy = CurrentMouseState.y - GameMouseState.y; AngleY+=m_timeElapsed*dx*7.0f; } GameMouseState = CurrentMouseState; // Set back to window center in Render function } VOID UpdateCamera() { D3DXVECTOR3 CameraOrigTarget(0, 0, -1); D3DXVECTOR3 CameraOrigUp(0, 1, 0); D3DXMATRIX CameraRot; D3DXMATRIX CameraRotX; D3DXMatrixRotationX(&CameraRotX,D3DXToRadian(AngleX)); D3DXMATRIX CameraRotY; D3DXMatrixRotationY(&CameraRotY,D3DXToRadian(AngleY)); CameraRot = CameraRotX * CameraRotY; D3DXVECTOR3 CameraRotTarget; D3DXVec3TransformNormal(&CameraRotTarget,&CameraOrigTarget,&CameraRot); D3DXVECTOR3 CameraTarget; CameraTarget = CameraPos + CameraRotTarget; D3DXVECTOR3 vUpVec( 0.0f, 1.0f, 0.0f ); D3DXMatrixLookAtLH( &matView, &CameraPos, &CameraTarget, &vUpVec ); g_pd3dDevice->SetTransform( D3DTS_VIEW, &matView ); D3DXMatrixPerspectiveFovLH( &matProj, D3DX_PI / 4, 1.0f, 1.0f, 100.0f ); g_pd3dDevice->SetTransform( D3DTS_PROJECTION, &matProj ); }

  Read the article

• Help recovering broken OS (permissions issue)

  - by Guandalino

  (At the bottom there is an important update.) I was doing experiments in order to backup a remote account to my local system, Ubuntu 12.04 LTS. I'm not confident with duplicity and probably, due to wrong syntax, some local files have been replaced with remote files. This is just a supposition, I'm not sure this is the real cause of OS corruption. The corruption happened after experimenting with backups, so I think I did something wrong at this regard. I was aware there was a problem when I tried to access a command using sudo: $ sudo ls sudo: unable to open /etc/sudoers: Permission denied sudo: no valid sudoers sources found, quitting sudo: unable to initialize policy plugin This is how /etc/sudoers looks like: $ ls -ald /etc/sudoers -r--r----- 1 root root 788 Oct 2 18:30 /etc/sudoers At this point I tried to reboot and now this is the message I get: The system is running in low graphics mode. Your screen, graphics card and input device settings could not be detected correctly. You will need to configure these yourself. I tried to follow the wizard to configure these settings, but without luck (the system prevents me going on when I press "Next"). The thing that makes me a bit less worried is that all the data on the disk seems readable and I'm able to access them using a live cd. I run memtest and RAM seems to be OK. Do you have any idea about how to recover my system? I'm very glad to provide further information, just let me know what info could be helpful. UPDATE. The issue is about wrong permissions and this is how I discovered: I mounted the root partition of the broken OS on /mnt/broken/ (live CD) and did ls /mnt/broken/. I got a permission denied error, while I expected to have the directory listing. I had to do sudo ls /mnt/broken/ and this worked. Thus without having root permission via sudo it's impossible to access the root of broken os. The current output of ls -ld /mnt/broken/ is: drwxr-x--- 29 1000 812 4096 2012-12-08 21:58 /mnt/broken Any thoughts on how to restore the old (working) set of permissions?

  Read the article

• AS3 - At exactly 23 empty alpha channels, images below stop drawing

  - by user46851

  I noticed, while trying to draw large numbers of circles, that occasionally, there would be some kind of visual bug where some circles wouldn't draw properly. Well, I narrowed it down, and have noticed that if there is 23 or more objects with 00 for an alpha value on the same spot, then the objects below don't draw. It appears to be on a pixel-by-pixel basis, since parts of the image still draw. Originally, this problem was noticed with a class that inherited Sprite. It was confirmed to also be a problem with Sprites, and now Bitmaps, too. If anyone can find a lower-level class than Bitmap which doesn't have this problem, please speak up so we can try to find the origin of the problem. I prepared a small test class that demonstrates what I mean. You can change the integer value at line 20 in order to see the three tests I came up with to clearly show the problem. Is there any kind of workaround, or is this just a limit that I have to work with? Has anyone experienced this before? Is it possible I'm doing something wrong, despite the bare-bones implementation? package { import flash.display.Sprite; import flash.events.Event; import flash.display.Bitmap; import flash.display.BitmapData; public class Main extends Sprite { public function Main():void { if (stage) init(); else addEventListener(Event.ADDED_TO_STAGE, init); } private function init(e:Event = null):void { removeEventListener(Event.ADDED_TO_STAGE, init); // entry point Test(3); } private function Test(testInt:int):void { if(testInt==1){ addChild(new Bitmap(new BitmapData(200, 200, true, 0xFFFF0000))); for (var i:int = 0; i < 22; i++) { addChild(new Bitmap(new BitmapData(100, 100, true, 0x00000000))); } } if(testInt==2){ addChild(new Bitmap(new BitmapData(200, 200, true, 0xFFFF0000))); for (var j:int = 0; j < 23; j++) { addChild(new Bitmap(new BitmapData(100, 100, true, 0x00000000))); } } if(testInt==3){ addChild(new Bitmap(new BitmapData(200, 200, true, 0xFFFF0000))); for (var k:int = 0; k < 22; k++) { addChild(new Bitmap(new BitmapData(100, 100, true, 0x00000000))); } var M:Bitmap = new Bitmap(new BitmapData(100, 100, true, 0x00000000)); M.x += 50; M.y += 50; addChild(M); } } } }

  Read the article

• Windows Phone 7, taking the mobile out of mobile

  - by markritchie

  I’ll start off this blog entry with a little background which is necessary for you to understand my situation. I moved from to the UK to Germany about three years ago and while I can converse in German, English is still very much my first language and the language I want my content delivered in. I happily purchased a HTC HD7 when WP7 was released here in Germany thinking foolishly that Microsoft really would get internationalization and localization as it’s at the heart of their business and developer products. Overall I’m very happy with my WP7, the camera sucks but that’s more HTC’s fault that Microsoft, but other than that it’s a very promising platform. My problems started when I purchased my first app. Initially everything appeared to be fine and things were as smooth as things had been with my previous free applications, however about a month after I received an email from Zune informing me that the credit card that they had registered against my account had expired. No problem I foolishly thought; I’ll simply add a new one. I don’t want to bore you with the details of what I’ve been through other than to take the low-lights: trying numerous websites, posts on Microsoft Answers and a tweet to Microsoft Support all to no avail. Today somebody suggested that I call the Xbox support line in the UK as they had solved their billing problems this way. So I called up the Xbox support line since I hadn’t resolved the problem using the Zune portal to resolve my problem with my WP7 (anybody else thinks Microsoft might need some consolidation here). After being on the phone with a very friendly representative in Ireland I was informed that because my British credit card has a billing address in Germany they are unable to accept it as a credit card. Because my Live ID and Zune Tag are registered in the UK they cannot take my card. Their solution is that I have to create a new Zune Tag that has its locale in Germany and then associate it with my phone. Now, first thing I go to register for a Zune Tag with a German locale it very kindly switches into German for me, nothing quite like reading a EULA in a language you’re not fluent in. I’ve no idea how this will affect the apps that are available to me in the app store, and I’m pretty sure it means that all my Xbox live achievements will become history. And what if I was to move to say France at some point do I have to go through all this again? At the end of the day I’m trying to set something up so I can give them my money and they’re making it VERY difficult for me. Could you imagine walking into a book store when you were on holiday and being told by the clerk that they couldn’t take your credit card because you came from another country?

  Read the article

• A better way to organize your Silverlight Code Snippets.

  - by mbcrump

  I hate re-writing code. I also hate it when I find a great code snippet on the web and forget to bookmark it or it gets lost in my endless sea of bookmarks. So what do you do to get around this? This is the question that I was asking myself at the end of 2010. How can I get my Silverlight code organized? My requirements for a snippet manager were: Needs to be FREE. An easy way to view XAML/C# code behind together in one “view”. I wanted the ability to store the code snippets in cloud in case my HDD dies. Searchable Keywords to quickly find code snippets. I started looking for a snippet manager that would allow me to do just that and finally found Snippet Manager. Before going any further, I think that one of the most important things to note here is that this software supports 37 languages. It’s not just for Silverlight developers nor C# only guys. The software supports Java, SQL and even COBOL.   Below is a screenshot of the Snippet Manager that shows my Silverlight code snippet. You will notice that I have highlighted two sections. The top part is my XAML and the bottom is my C# code behind. I’ve included a sample below of my code snippets so that you can get an idea of how I organized it. Another thing that’s great about this software is that it supports plain text. I added some connection strings in the TEXT section below.  Once you have finished adding your code snippets, you can store them in the cloud. I created a FTP directory called “snippets” on my FTP Server and hit the upload button once I am finished adding my new codes snippets. This will allow me to use the code snippets on another computer with this application on my USB Key. See screenshots below: Enter your FTP credentials below: Hit the Uploads button on the Toolbar: Login in to your FTP Server and verify the following files are now on the FTP Server: Another great feature of the Snippet Manager is that you can also integrate this into VS2010 by clicking Tools –> External Tools: And setting up your External Screen to point to the Executable: You can now launch it by going to Tools –> Snippet Manager. If you want you could also a shortcut to launch the program with HotKeys. As you can see, this is a nice little program that includes everything needed to organize your code snippets very clean. I didn’t go over every feature but this is something that you might want to download and give it a shot.  Subscribe to my feed CodeProject

  Read the article

< Previous Page | 779 780 781 782 783 784 785 786 787 788 789 790  | Next Page >