Search Results

Search found 25075 results on 1003 pages for 'default trace'.

Page 786/1003 | < Previous Page | 782 783 784 785 786 787 788 789 790 791 792 793  | Next Page >

• Single m0n0wall - Two LAN Subnets - How To Setup

  - by SnAzBaZ

  I have two LAN subnets that I need to link together they are 192.168.4.0/24 and 192.168.5.0/24 There is a m0n0wall running on 192.168.4.1. It's LAN connection goes out to our network switch, and it's WAN port goes out to our ADSL modem. WAN is connected via PPPoE. The 192.168.4.0 subnet contains all of our office workstations. The 192.168.5.0 subnet contains development servers and test machines that need to obtain internet access and be "managed" by computers on the 192.168.4.0 subnet, but need to be on their own subnet as well. I have a Draytek 2820N configured on 192.168.5.1 with it's WAN2 port configured as 192.168.4.25 and a default gateway of 192.168.4.1. Machines on the 5.0 subnet can connect to the internet via the m0n0wall just fine. I configured a static route on the m0n0wall LAN interface, Network 192.168.5.0/24 and Gateway 192.168.4.25. Machines on the 5.0 subnet can ping machines on the 4.0 network but the reverse does not work. I configured a new firewall rule on the m0n0wall that allows any traffic on the LAN interface with a source IP of 192.168.4.25 to be allowed. The DrayTek firewall is currently configured to pass all traffic regardless. When I try to ping a machine in the 5.0 subnet from 4.0 I see this in my m0n0wall log: BLOCK 14:45:27.888157 LAN 192.168.4.25 192.168.4.37, type echoreply/0 ICMP So the reply is being sent from the 5.0 subnet but is not being allowed to reach my workstation because the firewall is blocking it. Why is the firewall blocking it ? I hope the explanation of my network is clear, please ask if you require further clarification. Thank you.

  Read the article

• configuring apache with mod_mono for .net app

  - by Mystere Man

  I'm having a huge problem getting mod_mono and apache configured to work correctly. I've had this working at one time, but I can't seem to figure out where i'm going wrong. I'm using mono-server4. I'm trying to use a seperate port from the main website. So I have in /etc/apache2/sites-available (with a link from sites-enabled) a vhost configuration that looks like this: <VirtualHost *:9999> ServerName XXX ServerAdmin web-admin@XXX DocumentRoot /var/xxx MonoServerPath XXX "/usr/bin/mod-mono-server4" MonoDebug XXX true MonoSetEnv XXX MONO_IOMAP=all MonoApplications XXX "/:/var/xxx" <Location "/"> Allow from all Order allow,deny MonoSetServerAlias XXX SetHandler mono SetOutputFilter DEFLATE SetEnvIfNoCase Request_URI "\.(?:gif|jpe?g|png)$" no-gzip dont-vary </Location> <IfModule mod_deflate.c> AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript </IfModule> </VirtualHost> I used mono-server4-admin to create the application mono-server4-admin --path=/var/xxx --app=/XXX --port=9999 When i start apache, it gives the error: Syntax error on line 13 of /etc/apache2/sites-enabled/xxx: Server alias 'XXX, not found. This corresponds with the MonoSetServerAlias statement. So I commented it out, and when I do that apache starts. However, when I try to access the site, I get a 500 error. The access log indicates that it's trying to access the app on port 80, rather than 9999. I'm not sure what the problem is here. Can anyone help me get figure out where I went wrong? My mono-server4-hosts.conf contains this: # start /etc/mono-server4/conf.d/RMRSite/10_XXX Alias /XXX "/var/xxx" AddMonoApplications default "/XXX:/var/xxx" <Directory /var/xxx> SetHandler mono <IfModule mod_dir.c> DirectoryIndex index.aspx </IfModule> </Directory> # end /etc/mono-server4/conf.d/XXX/10_XXX Also, my /etc/mono-server4/conf.d/XXX/10_XXX contains this: This is the configuration file for the XXX virtualhost path = /var/xxx alias = /XXX vhost = localhost port = 9999

  Read the article

• connecting to server with multiple nics in other vlan

  - by Thierry

  I have a windows 2003 server with 3 nics on 3 vlan's (this is in domain 1). nic 1 has a default gateway to my router/firewall (sonicwall). In nic 2 and 3 I have left it empty, because it is advised like that everywhere. Within this domain and VLAN's 1-3 everything works fine. BUT... I have a second domain (domain 2) with a 4th Vlan (all 4 VLAN's connected to the same router/firewall) from which my clients need to access the 2003 server in domain 1 (it's my antivirus management console for both domains). when i ping the server from my vlan4 by it's FQDN, it randomly chooses ip from nic 1, 2 or 3 from my 2003 server. (logically because that server is know in DNS with it's 3 IP-addresses. And that is needed for my VLAN's 1-3) I don't really have a problem with that. BUT, I only get an answer of NIC1 (which sounds logically to me, because it's the only one with a gateway). It is not a router problem, because I'm testing in this phase and ping from vlan4 to any machine in vlan1, 2 or 3 that has 1 nic works just fine. If i add a gateway to nic2 and nic3, I get answer from all 3 nics and this works fine. But I know it's adviced to not do that. Can anyone give me advice in this particular case? Would it really be a problem to add a gateway to nic 2 and 3? They would be pointing to the same router/firewall (only with different ip-address, based on the vlan). Or is there another good solution to fix this problem? Thank's in advance, Thierry.

  Read the article

• Nginx/puma rhel unix socket permission error?

  - by Kevin Brown

  When I try to start my puma server, I get the error: /.rvm/gems/ruby-2.1.1/gems/puma-2.9.0/lib/puma/binder.rb:275:in `initialize': Permission denied - connect(2) for "/var/run/nvhbase.sock" (Errno::EACCES) My sites-available/nvhbase.conf file: upstream nvhbase { server unix:/var/run/nvhbase.sock; } server { listen 80 default_server; server_name 207.131.132.219; root /home/vf032500/dev/nvh/public; location / { proxy_pass http://unix:/var/run/nvhbase.sock; proxy_http_version 1.1; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection $connection_upgrade; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-Proto https; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_redirect off; } } I don't know a lot about unix sockets and everything works fine using tcp/puma default. My rails app is in my user directory. Is that the problem?? socket is starting in /var/run--I can start in /tmp, but I've heard that's bad practice? Provided I start the server in /tmp, I then can't access it via the server's ip--then what? I'm happy to provide any needed info, I just don't know a whole lot about server/nginx/puma.

  Read the article

• Why does Internet Explorer sometimes fail to connect to anything until I restart it?

  - by cletus

  IE has an annoying problem on my PC (XP SP3). I start it and try to go to Google (for example) and it'll sit there saying "Connecting" but nothing will happen and it doesn't matter how many times I try, it won't connect to anything. I discovered that if I kill IE and restart it then it might start working (and then it'll work every time). It might takes 3-4 restarts (of IE, not the PC) to get a working IE. Now I wouldn't normally care about this since I use Chrome but a lot of things use IE by default like Windows Update and the online help in Office 2003 so I would like to fix it. Interestingly, my work laptop, which is running Windows 7 RC 64-bit, has exactly the same problem (completely different network and everything). I'm utterly convinced it's not a network or hardware problem but some software problem. Edit: More info. It's IE8; No add-ons; Automatically detect settings is not enabled. It is set to "Never dial a connection".

  Read the article

• Applying ACLs to a Dovecot public namespace

  - by larsks

  I have a public namespace define in my dovecot (dovecot-2.0.9) configuration that looks like this: namespace { type = public separator = . prefix = news. location = maildir:/var/spool/news subscriptions = no } I would like to make all the mailboxes in this namespace read-only. I've got the following configuration for the ACL plugin: plugin { acl = vfile:/etc/dovecot/acls:cache_secs=300 } After perusing the documentation, it seemed as if I had a mailfolder /var/spool/news/.foo.bar that I could place the following into /var/spool/news/.foo.bar/dovecot-acl: anyone rl But that doesn't have any affect. I also tried creating a file /usr/local/etc/dovecot/acls/news.foo.bar with the same contents, but that didn't do anything, either. I've turned on mail debugging: mail_debug = yes But the log doesn't produce anything that appears to be relevant to ACL processing. I'm curious to know if anyone has gotten this to work correctly and if so if you could provide some configuration examples. Also, if there's any way to do this that doesn't involve per-mailbox configuration (.e.g, the ability to apply an ACL to news.* or something), that would be awesome. Getting the documented behavior for default ACLs working would be a step in the right direction.

  Read the article

• How do I diagnose the cause of a freeze after resuming in Windows XP (SP3)?

  - by Software Monkey

  I have just built a new computer from parts. Whenever I resume from any sleep mode (S1, S3 or S4) the computer freezes within about 60 seconds of the welcome screen appearing. I have updated the BIOS and all drivers to current from the motherboard manufacturer's site. I have reset BIOS settings to default, including disabling AMD Cool n Quiet. The windows event logs are not helpful at all. Other than immediately after resuming the system is stable as long as AMD CnQ is disabled. The system is: Mobo : MSI 790GX-G65 CPU : AMD Phenom II 965 BE at 3.6 GHz Memory : Corsair DDR3 1600, at 1333 MHz and 9-9-9-21 HDDs : 1 EIDE, 2 SATA in RAID-0 DVD : 1 Card Reader: 1 multi-card reader Keyboard is attached via PS2 and mouse is USB. Any thoughts or pointers would be most welcome. EDIT: It appears that the computer may not freeze if a program is left running which puts it under significant load. I left a stress test running which keeps all cores under 85% load, and my son put the computer to sleep - while this program is running it I have been able to resume from S3 successfully 4 times, compared against about 20 tests with the computer idle which have all frozen. So this may be related to being in an idle state when it resumes.

  Read the article

• Should I embed the sRGB color profile in JPEG files?

  - by basic6

  I have a large (growing) collection of scanned images. They are TIFF files, mostly 48 bit with the Adobe RGB color space. This color profile is integrated in the files. When such a file is opened in IrfanView (with plugins), it says (Image - Information) Adobe RGB 1998. "Normal images", like the JPG files from a digital camera, do not (necessarily) have a color profile integrated in the file. I understand that it's necessary to include the Adobe RGB profile in an image file which uses the Adobe RGB space, so the color values can be interpreted correctly. Here's a test image with a completely different color profile, programs that ignore the included profile (like MSIE8 or Gwenview) will render it as sRGB (?): I'm planning to convert my TIF files to JPG, so I'm wondering if there's anything wrong with using IrfanView that would save them as sRGB without embedding the sRGB profile. I've heard that images should always be saved with the color profile included. Since every image seems to be interpreted as sRGB by default (by software without color management), I don't understand why the sRGB profile should be included?

  Read the article

• Windows 7 Startup fails after installation

  - by Nadav S.

  I have installed Windows 7 Ultimate a week ago. Yesterday I've noticed that the SP1 update is available. After installation of SP1 the computer failed to startup, and had shown a black screen. I couldn't even go to safe mode and F8 didn't help. After some fixing attempts including system restore, startup repair, bootmgr & BCD rebuilding from CMD, I have decided to reinstall Windows (after all, it's only a week old) After the successful installation, I have decided to first install all available updates before I continue. So after the updates download & installation, the computer rebooted. And now I didn't see the black screen again - but in the "Starting Windows..." screen the logo didn't appear and the system didn't startup. Here I could go to safe mode selection window, but it didn't work either ("Loading Windows Files" but nothing). I've also tried: I thought that the CD was corrupted, so I've used a fresh new disk of Windows, tried x86 & x64 versions, the same symptoms, no change. Resetted the BIOS to default, no change. Memory diagnostic HDD diagnostic Restarted Windows WITHOUT INSTALLING UPDATES, but it had the same symptom, so maybe Windows Update is not the case?! I've tried installing it so many times - that I am simply stuck - I can't "reinstall Windows, because it is corrupted...". Maybe the HDD is corrupted? I've also checked it and didn't find a problem.

  Read the article

• Why is writing to my external hard drive slow, while benchmarks show fast writing?

  - by matix2267

  I have an iOmega eGo 320GB portable drive connected through USB2.0 to my laptop running Windows Vista. It's been working fine for quite some time until recently it became very slow when writing e.g. when copying ~300MB movie over to the drive at first it is extremely fast but it actually doesn't write it only puts in cache and then hangs on last 10-20MBs for about a minute. When copying larger files it's the same story: starts fast but then slows down to ~5MB/s (sometimes even slower down to 2MB/s). Strange thing is that I have always had caching disabled for this drive (it was disabled by default and I never bothered changing it). At first I thought that the disk is dying so I checked S.M.A.R.T. values and everything is fine there. I also run chkdsk and it seemed to fix the problem - it worked fast for a few minutes but then it slowed down again. I also tried plugging it into another USB port - no difference. Additionally I noticed that reading under certain circumstances is sometimes slower e.g. loading times for some games are ~10 times longer, whereas simple copying files from this drive to my internal HDD is fast. I ran a speed benchmark using CrystalDiskMark with a 5x100MB run and strangely got these results: read write (MB/s) Seq 33.05 28.25 512k 17.30 15.27 4k 0.267 0.372 4kQD32 0.510 0.260 This is different from what most other people have (I've found many threads about slow disk write while googling but all of them were slow on benchmarks too) which is why I decided to post this problem here. BTW most of the time when writing (or sometimes reading) the activity led is mostly idle (blinks a while and then stops for longer, sometimes has slower blinks ~1 sek, sometimes goes off for a few seconds - extremely long blink :) ) but when benchmarking, defragmenting or just reading (copying from this drive, installing apps from installers there, watching HD videos) it is blinking really fast (like it should) and there are no slowdowns. It shouldn't be driver issue unless stock Windows drivers have some issues I'm not aware of.

  Read the article

• Exchange 2010 issuing NDRs to Hotmail/Live & few other domains on receipt of message

  - by John Patrick Dandison

  I'm working through a beast of an issue at the moment. Exchange 2010 single server on prem Hybrid deployment to Office 365 ESMTP filtering turned off on ASA Certain domains (most consistently, Hotmail/Live) cannot send us mail. At one point, we couldn't send out either, but I created a new Send Connector that forces HELO instead of EHLO. I turned on SMTP logging, an example of the failed inbound message connection is below. I've read that it could be that reverse DNS is the problem, i.e., the exchange banner smtp address needs to reverse-DNS back to the same IP. Since it's the default exchange connector, its banner is the server's name, but the DNS name of the MX record is different. I'm waiting for the PTR records to update to reflect the internal name as well. Is that the right direction? Is this all DNS or something different? SMTP Session Log (single failed session for illustration): SMTPSubmit SMTPAcceptAnySender SMTPAcceptAuthoritativeDomainSender AcceptRoutingHeaders 220 ExchangeServerName.internalSubDomain.example.com Microsoft ESMTP MAIL Service ready at Mon, 15 Oct 2012 09:57:24 -0400 EHLO col0-omc3-s4.col0.hotmail.com 250-ExchangeServerName.internalSubDomain.example.com Hello [65.55.34.142] 250-SIZE 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-STARTTLS 250-X-ANONYMOUSTLS 250-AUTH NTLM LOGIN 250-X-EXPS GSSAPI NTLM 250-8BITMIME 250-BINARYMIME 250-CHUNKING 250-XEXCH50 250-XRDST 250 XSHADOW MAIL FROM:<[email protected]> 08CF5268DABBD9AA;2012-10-15T13:57:24.564Z;1 250 2.1.0 Sender OK RCPT TO:<[email protected]> 250 2.1.5 Recipient OK XXXX 1282 LAST Tarpit for '0.00:00:05' 500 5.3.3 Unrecognized command XXXXXXXXX from COL002-W38 ([65.55.34.135]) by col0-omc3-s4.col0.hotmail.com with Microsoft SMTPSVC(6.0.3790.4675); Tarpit for '0.00:00:05' 500 5.3.3 Unrecognized command " XXXX 15 Oct 2012 06:57:24 -0700" Tarpit for '0.00:00:05' 500 5.3.3 Unrecognized command XXXXXXXXXXX <[email protected]> Tarpit for '0.00:00:05'

  Read the article

• AGP 4x slot running at 2x

  - by Wesley

  Hi all, Here are the specs of the machine related to this question: AMD Athlon XP 2400+ @ 2 GHz / 2x 512MB PC3200 DDR RAM / 3D Fuzion 128MB GeForce 6200 AGP / WD 160GB IDE HDD / FIC AM37 (mobo) / Codegen 350W PSU / Windows XP Pro SP3 So, for some odd reason, the GeForce 6200 that is in the AGP 4x slot is not running at 4x, but 2x. The card itself supports AGP 4x and even 8x. When I enter the BIOS, the options for the AGP slot only allow 2x as the max. Before, the max option for the AGP slot in the BIOS was 4x. (I do get the 4x option after I reset CMOS, but it does not stick after a restart.) I don't exactly know what the problem could be, but a few weeks ago, this machine's hard drive was reformatted and got a fresh install of XP. Also, I did install Rivatuner, but I never overclocked it at all. (I uninstalled it after thinking that it had done something.) Otherwise, I cannot figure out the cause of the problem. Does anybody have an idea why this is happening? (Would I have to do another reformat?) Thanks in advance. PS: the other options for the AGP slot are aperture size (which I tried changing, but it did nothing) and FastWrite (enabled by default).

  Read the article

• Windows file association for README, INSTALL, LICENSE and the like [closed]

  - by Lumi

  Possible Duplicate: How to set the default program for opening files without an extension in Windows? Many files originating in the UNIX world come without file extension. Popular examples include README, INSTALL, LICENSE. We know for a fact that these are text files. It is therefore a bit disappointing not to be able to just double-click them open in Explorer and see them in Notepad (actually, Notepad2 because of the UNIX line endings which silly Microsoft Notepad doesn't render correctly). Does anyone know of a way to create a file association for, say, README files without extension? This could then be replicated to cover the most frequently occurring file types, and then double-clicking them open would work. Update (Sort of in response to all your comments.) Thanks, folks, your comments and answers have helped me. @Indrek, yes, I was under the assumption that you could somehow create an association for just README or Makefile, and couldn't do so for files without extension. Turns out the contrary is true, and yes, that is a workaround that neatly solves the issue. Ultimately, I just want to be able to double-click to open a README or Makefile, that's all. @Sampo, the SendMe trick is also useful, although usability is not as great as a straight double-click. (I'm really lazy sometimes.) Turns out the following trick using ftype and ftype from an Administrator prompt does the double-click enabling job: assoc .=no_ext ftype no_ext=%SystemRoot%\system32\NOTEPAD.EXE %1 :: You can see it created some entries in the registry: reg query hkcr\no_ext /s reg query hkcr\. /s

  Read the article

• How can I prevent Apache from asking for credentials on non SSL site

  - by Scott

  I have a web server with several virtual hosts. Some of those hosts have an associated ssl site. I have a DirectoryMatch directive in my main config file which requires basic authentication to any directory with secured as part of the directory path. On sites that have an SSL site, I have a rewrite rule (located in the non ssl config for that site), that redirects to the SSL site, same uri. The problem is the http (80) site asks for credentials first, and then the https (443) site asks for credentials again. I would like to prevent the http site from asking and thus avoid the potential for someone entering credentials and having them sent in clear text. I know I could move the DirectoryMatch down to the specific site, and just put the auth statement in the SSL config, but that would introduce the possibility of forgetting to protect critical directories when creating new sites. Here are the pertinent declarations: httpd.conf (all sites): <DirectoryMatch "_secured_"> AuthType Basic AuthName "+ + + Restrcted Area on Server + + +" AuthUserFile /home/websvr/.auth/std.auth Require valid-user </DirectoryMatch> site.conf (specific to individual site) <DirectoryMatch "_secured_"> RewriteEngine On RewriteRule .*(_secured_.*) https://site.com/$1 </DirectoryMatch> Is there a way to leave DirectoryMatch in the main config file and prevent the request for authorization from the http site? Running Apache 2 on Ubuntu 10.04 server from the default package. I have AllowOverride set to none - I prefer to handle things in the config files instead of .htaccess.

  Read the article

• How can I backup entire installations of a program, instead of just manually backing up individual f

  - by NoCatharsis

  It seems pretty straightforward to backup individual files, such as pictures, saved games, or settings files - just copy them straight over to your 2nd HDD or to an online service like DropBox. However, is there any way to backup entire installations of a program? For instance, my Firefox directory has a lot of personal customizations and add-ons. I don't want to go through each item and decide to back it up or let it go. So my next option is to copy out the entire directory for backup. But, if I copy the entire directory back onto the HD after a format, it is not an integrated installation and this seems like it could be troublesome. I would assume Windows cannot detect the directory for uninstallation, or would not let you choose Firefox as your default browser, right? I'm no pro, but this sounds like a bad idea. So my question is whether there is a good way to preserve all necessary files, while also preserving the full installation process of an application. This is not specific to Firefox - I would like to know how to do this for any application. Thank you.

  Read the article

• Using udev to create a character device based on a driver being loaded

  - by SteveCB

  I'm in the process of setting up RAID monitoring for a number of Dell servers that use the PERC 6i integrated card. We're using Nagios at present and the check_megasasctl plugin seems to fit the bill. However, the plugin relies upon the existence of: /dev/megaraid_sas_ioctl_node This device node doesn't exist by default, you have to create it by hand using something like: mknod /dev/megaraid_sas_ioctl_node c 253 0 Now, to make the existence of this device node persistent across reboots, I thought I could write a udev rule, but as usual, I'm missing something. I thought I could create a file such as /etc/udev/rules.d/10-local/rules that contained: DRIVER=="megasas" NAME="megaraid_sas_ioctl_node" MODE="0600" But this doesn't work - no device node after a reboot. Dmesg output indicates the megasas driver is loaded and functional: megasas: 00.00.04.01-RH1 Thu July 10 09:41:51 PST 2008 megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 1:slot 0:func 0 megasas: FW now in Ready state Further, I don't see any means to instruct udev on which type of device node to create: character or block. I suspect I'm failing to understand exactly how udev is meant to work. I realise I could just cheat and run MegaCLI in /etc/rc.local, redirecting output to /dev/null; it creates the megaraid_sas_ioctl_node device node as part of its execution. I just thought using udev rules would be a) cleaner and b) a useful learning exercise. Perhaps I should just dump the above mknod command in /etc/rc.local... So how do I get udev to create the /dev/megaraid_sas_ioctl_node device node based on the presence of the megasas driver? Cheers Steve

  Read the article

• How Does EoR Design Work with Multi-tiered Data Center Topology

  - by S.C.

  I just did a ton of reading about the different multi-tier network topology options as outlined by Cisco, and now that I'm looking at the physical options (End of Row (EoR) vs Top of Rack(ToR)), I find myself confused about how these fit into the logical constructs. With ToR it also maps 1:1: at the top of each rack there is a switch(es) that essentially act as the access layer. They connect via fiber to other switches, maybe chassis-based, that act as the aggregation layer, that then connect to the core layer. With EoR it seems that the servers are connecting directly to the aggregation layer, skipping the access layer all together, by plugging directly into what are typically chassis switches. In EoR then is the standard 3-tier model now a 2-tier model: the servers go to the chassis switch which goes straight to the core switch? The reason it matters to me is that my understanding was that the 3-tier model was more desirable due to less complexity. The agg switch pair acts as default gateway and does routing; if you use up all of your ports in your agg layer pair it's much more complicated to add additional switches, than simply adding more switches at the access layer. Are there other downsides to this layout? Does this 3-tier architecture still apply in some way in EoR? Thanks.

  Read the article

• Host multiple domains with Apache on a VPS

  - by Kunal

  Hi I have recently bought a windows VPS and installed apache, mysql using xampp. All services are running fine. I can access the hosted site using the IP of VPS but what I need to do is host multiple domains on that server. Actually my requirement was to use htaccess on a php based site but the site had to access data from ms sql server as well. So needed to enable php_mssql.dll in the php.ini which no shared hosting was supporting. Had to go for this VPS. Plesk was installed by default but as htaccess wont work with IIS, I had to stop IIS service and install apache there. Now all is well, but I need to find a way to host multiple domains there. When I bought the VPS they hosting people sent me the dedicated IP of the server and also I have the 2 name servers required to host domains. What is the next step? Exactly which file I need to modify to get things done? Please help! Any kind of help is much appreciated. Thanks in advance for all of your kind help and time.

  Read the article

• CC.NET + SVN : Server certificate issue

  - by MSI

  I am trying to setup Continuous Integration in our office. Being a puny little developer I am facing this supposedly infamous problem: " Source control operation failed: svn: OPTIONS of 'https://trunkURL': Server certificate verification failed: issuer is not trusted" So I tried the following solution - Run CC.NET service (server running as win service) using a domain account (rather than default LOCAL SYSTEMS) and accept cert permanently using command prompt under that user by using svn log/list on the repo. Doesn't help :(. I am getting the following from my artifact/log files(or dashboard) ThoughtWorks.CruiseControl.Core.CruiseControlException: Source control operation failed: svn: OPTIONS of 'https://TrunkURL': Server certificate verification failed: issuer is not trusted (https://ServerAdd) . Process command: E:\(svn.exe Path) log https://TrunkURL -r "{2010-11-08T02:12:20Z}:{2010-11-08T02:13:21Z}" --verbose --xml --no-auth-cache --non-interactive at ThoughtWorks.CruiseControl.Core.Sourcecontrol.ProcessSourceControl.Execute(ProcessInfo processInfo) at ThoughtWorks.CruiseControl.Core.Sourcecontrol.Svn.GetModifications(IIntegrationResult from, IIntegrationResult to) at ThoughtWorks.CruiseControl.Core.Sourcecontrol.QuietPeriod.GetModificationsWithLogging(ISourceControl sc, IIntegrationResult from, IIntegrationResult to) at ThoughtWorks.CruiseControl.Core.Sourcecontrol.QuietPeriod.GetModifications(ISourceControl sourceControl, IIntegrationResult lastBuild, IIntegrationResult thisBuild) at ThoughtWorks.CruiseControl.Core.IntegrationRunner.GetModifications(IIntegrationResult from, IIntegrationResult to) at ThoughtWorks.CruiseControl.Core.IntegrationRunner.Integrate(IntegrationRequest request) We are using VisualSVN Server and CC.NET for this adventure. Tips, suggestions will be highly appreciated. Thanks

  Read the article

• What is the optimum way to secure a company wide wiki?

  - by Mark Robinson

  We have a wiki which is used by over half our company. Generally it has been very positively received. However, there is a concern over security - not letting confidential information fall into the wrong hands (i.e. competitors). The default answer is to create a complicated security matrix defining who can read what document (wiki page) based on who created it. Personally I think this mainly solves the wrong problem because it creates barriers within the company instead of a barrier to the external world. But some are concerned that people at a customer site might share information with a customer which then goes to the competitor. The administration of such a matrix is a nightmare because (1) the matrix is based on department and not projects (this is a matrix organisation), and (2) because in a wiki all pages are by definition dynamic so what is confidential today might not be confidential tomorrow (but the history is always readable!). Apart from the security matrix, we've considered restricting content on the wiki to non super secret stuff, but off course that needs to be monitored. Another solution (the current) is to monitor views and report anything suspicious (e.g. one person at a customer site having 2000 views in two days was reported). Again - this is not ideal because this does not directly imply a wrong motive. Does anyone have a better solution? How can a company wide wiki be made secure and yet keep its low threshold USP? BTW we use MediaWiki with Lockdown to exclude some administrative staff.

  Read the article

• Connect trough remote computer connection

  - by Didac

  First, sorry for my english and my poor knowlodge of this subject. I have a dedicated server placed in Germany (windows 2008 R2) and I live in spain. I would like to access internet from my home computer (Windows 7 Pro x64), trough my server in Germany, so I can use a German IP, what I need some times. I have complete acces in to both computers, but I just don't know where to start. (My knwoledge is limited to software development :/ ) I'd like to know where to start, if I need to create a VPN and so.. Thanks in advance! Update 1 I tried a lot of options of OpenVPN, but I sadly I know nothing abuot networking, so I have to accept I do not know what I'm doing :( Here are my config files (note most of the options are from the sample config files). server.conf #server config file start port 1194 proto udp dev tun server 10.0.0.0 255.255.255.224 #you may choose any subnet. 10.0.0.x is used for this example. ca "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\server.crt" key "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\server.key" dh "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\dh1024.pem" push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" #the following commands are optional keepalive 10 120 comp-lzo persist-key persist-tun verb 5 #config file ends client.conf #client config file start client dev tun proto udp remote 176.9.99.180 1194 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\client1.crt" key "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\client1.key" ns-cert-type server comp-lzo verb 5 explicit-exit-notify 2 ping 10 ping-restart 60 route-method exe route-delay 2 # end of client config file And here's the server's network settings: IP address: 176.9.99.180 Subnet mask: 255.255.255.224 Default gateway: 176.9.99.161 Preferred DNS server: 127.0.0.1

  Read the article

• Permission Denied for FTP User

  - by Alasdair

  I have an FTP user whose default is /root/ftpuser This user can login fine. The user is the owner of the directory & the directory is even set to 777 permissions. But the user can't upload anything, the display is: Status: Connecting to xx.xxx.xxx.xx:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 2 of 50 allowed. Response: 220-Local time is now 05:12. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER ftpuser Response: 331 User ftpuser OK. Password required Command: PASS ********* Response: 230 OK. Current restricted directory is / Command: OPTS UTF8 ON Response: 200 OK, UTF-8 enabled Status: Connected Status: Starting upload of test.html Command: CWD / Response: 550 Can't change directory to /: Permission denied Command: MKD / Response: 550 Can't create directory: Permission denied Command: CWD / Response: 550 Can't change directory to /: Permission denied Command: SIZE /btn.png Response: 550 Can't check for file existence Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (66,232,106,33,52,218) Command: STOR /test.html Response: 553 Can't open that file: Permission denied Error: Critical file transfer error It's a Linux CentOS 6 server. Any ideas?

  Read the article

• How to pin "Visual Studio 2010 Documentation" shortcut to Windows 7 taskbar?

  - by Chris W. Rea

  I just installed Microsoft Visual Studio 2010 at home, on my Windows 7 PC. One of the items installed with VS2010 is "Microsoft Visual Studio 2010 Documentation". I like to have the documentation installed locally and at my fingertips, and so before had always added a shortcut for the help viewer to my Quick Launch toolbar. However, I'm not able to pin the new documentation to the Windows 7 taskbar. It's frustrating. Note carefully: When I launch "Microsoft Visual Studio 2010 Documentation" from the Start menu, it seems to perform two functions: First, it launches the "Help Library Agent", which is a local HTTP server from which the help content is served... similar to the local ASP.NET web development server. Second, it launches the default web browser against the localhost URL corresponding to the port on which the "Help Library Agent" is running, for example: http://127.0.0.1:47873/help/1-1444/ms.help?method=f1&query=msdnstart&product=VS&productVersion=100&locale=en-US ... in other words, the program doesn't leave behind an active foreground process that displays in the taskbar. So, I can't choose "Pin this program to taskbar" as one might do so with a typical program. How can I get a shortcut to "Microsoft Visual Studio 2010 Documentation" in the Windows 7 taskbar? Has anybody got a workaround for this?

  Read the article

• Windows Server 2008 - inexplicable system time jumps/glitches/inaccuracies

  - by Nathan Ridley

  I'm running a production web server on Windows Server 2008. On this server I have a database which logs certain user actions, but every now and again I inexplicably get database entries which, according to the record ID and the records immediately before and after, have the wrong time logged against them (7 days+ too old). For example, record ID 1001 will be for Dec 7, 11pm, 1002 will be for Dec 7, 11:01pm, then 1003 will be for Nov 28, 1:38am, then the next will be back on track again. The problem seems to occur in random records (or 2-3 records in a row) and crops up once every few days. This is absolutely baffling because there is only one place in the application that assigns this date/time value and it's simply the system UTC date. I have been synchronizing the system time to time-a.nist.gov (which I read in another article was a bit more reliable than the default time.windows.com) and it seems to occasionally get out of time anyway (3-4 minutes), but I'm speculating that occasionally the time server has a temporary glitch where the date changes to a drastically wrong value for a short space of time, then changes back. Either that, or the motherboard clock battery is screwed and the reason the time momentarily changes is that the motherboard loses the time and then the time synchronization puts it back again. Could either of my suspicions be right? Should I turn off time synchronization for a production server? Assigning dates to an event log where the dates are up to 2 weeks prior to the actual date is a severe problem I can't have when the next version of my application is released. Any suggestions or advice would be appreciated.

  Read the article

• Node.js Build failed: -> task failed (error#2)?

  - by Richard Hedges

  I'm trying to install Node.js on my CentOS server. I run ./configure and it runs perfectly fine. I then run the 'make' command and it produces the following: [5/38] libv8.a: deps/v8/SConstruct - out/Release/libv8.a /usr/local/bin/python "/root/node/tools/scons/scons.py" -j 1 -C "/root/node/out/Release/" -Y "/root/node/deps/v8" visibility=default mode=release arch=ia32 toolchain=gcc library=static snapshot=on scons: Reading SConscript files ... ImportError: No module named bz2: File "/root/node/deps/v8/SConstruct", line 37: import js2c, utils File "/root/node/deps/v8/tools/js2c.py", line 36: import bz2 Waf: Leaving directory `/root/node/out' Build failed: - task failed (err #2): {task: libv8.a SConstruct - libv8.a} make: * [program] Error 1 I've done some searching on Google but I can't seem to find anything to help. Most of what I've found is for Cygwin anyway, and I'm on CentOS 4.9. Like I said, the ./configure went through perfectly fine with no errors, so there's nothing there that I can see. EDIT I've got a little further. Now I just need to upgrade G++ to version 4 (or higher). I tried yum update gcc but no luck, so I tried yum install gcc44, which resulted in no luck either. Has anyone got any ideas as to how I can update G++?

  Read the article

< Previous Page | 782 783 784 785 786 787 788 789 790 791 792 793  | Next Page >