Search Results

Search found 24623 results on 985 pages for 'linux'.

Page 787/985 | < Previous Page | 783 784 785 786 787 788 789 790 791 792 793 794  | Next Page >

• debian lenny xen bridge networking problem

  - by Sasha

  DomU isn't talking to the world, but it talks to Dom0. Here are the tests that I made: Dom0 (external networking is working): ping 188.40.96.238 #Which is Domu's ip PING 188.40.96.238 (188.40.96.238) 56(84) bytes of data. 64 bytes from 188.40.96.238: icmp_seq=1 ttl=64 time=0.092 ms DomU: ping 188.40.96.215 #Which is Dom0's ip PING 188.40.96.215 (188.40.96.215) 56(84) bytes of data. 64 bytes from 188.40.96.215: icmp_seq=1 ttl=64 time=0.045 ms ping 188.40.96.193 #Which is the gateway - fail PING 188.40.96.193 (188.40.96.193) 56(84) bytes of data. ^C --- 188.40.96.193 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1013ms The system is debian lenny with a normal setup. Here is my configs: uname -a Linux green0 2.6.26-2-xen-686 #1 SMP Wed Aug 19 08:47:57 UTC 2009 i686 GNU/Linux cat /etc/xen/green1.cfg |grep -v '#' kernel = '/boot/vmlinuz-2.6.26-2-xen-686' ramdisk = '/boot/initrd.img-2.6.26-2-xen-686' memory = '2000' root = '/dev/xvda2 ro' disk = [ 'file:/home/xen/domains/green1/swap.img,xvda1,w', 'file:/home/xen/domains/green1/disk.img,xvda2,w', ] name = 'green1' vif = [ 'ip=188.40.96.238,mac=00:16:3E:1F:C4:CC' ] on_poweroff = 'destroy' on_reboot = 'restart' on_crash = 'restart' ifconfig eth0 Link encap:Ethernet HWaddr 00:24:21:ef:2f:86 inet addr:188.40.96.215 Bcast:188.40.96.255 Mask:255.255.255.192 inet6 addr: fe80::224:21ff:feef:2f86/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3296 errors:0 dropped:0 overruns:0 frame:0 TX packets:2204 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:262717 (256.5 KiB) TX bytes:330465 (322.7 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) peth0 Link encap:Ethernet HWaddr 00:24:21:ef:2f:86 inet6 addr: fe80::224:21ff:feef:2f86/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:3407 errors:0 dropped:657431448 overruns:0 frame:0 TX packets:2291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:319941 (312.4 KiB) TX bytes:338423 (330.4 KiB) Interrupt:16 Base address:0x8000 vif2.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:151 errors:0 dropped:33 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1164 (1.1 KiB) TX bytes:20974 (20.4 KiB) ip a s 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: peth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:24:21:ef:2f:86 brd ff:ff:ff:ff:ff:ff inet6 fe80::224:21ff:feef:2f86/64 scope link valid_lft forever preferred_lft forever 4: vif0.0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 5: veth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 6: vif0.1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 7: veth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 8: vif0.2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 9: veth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 10: vif0.3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff 11: veth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 12: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 00:24:21:ef:2f:86 brd ff:ff:ff:ff:ff:ff inet 188.40.96.215/26 brd 188.40.96.255 scope global eth0 inet6 fe80::224:21ff:feef:2f86/64 scope link valid_lft forever preferred_lft forever 14: vif2.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 32 link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff inet6 fe80::fcff:ffff:feff:ffff/64 scope link valid_lft forever preferred_lft forever brctl show bridge name bridge id STP enabled interfaces eth0 8000.002421ef2f86 no peth0 vif2.0 ip r l Dom0: 188.40.96.192/26 dev eth0 proto kernel scope link src 188.40.96.215 default via 188.40.96.193 dev eth0 DomU: 188.40.96.192/26 dev eth0 proto kernel scope link src 188.40.96.238 default via 188.40.96.193 dev eth0

  Read the article

• Can't exec "locale": No such file or directory

  - by Alex

  I am new in Linux. I was trying to install wine and after /i followed instructions from a youtube video i got to the point where I needed to install wine from Ubuntu Software Center. The problem is the Ubuntu Software Center doesn't work anymore, it ask me to reparir it, and when I push the Repair button it gives me this error: installArchives() failed: Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Preconfiguring packages ... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Preconfiguring packages ... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (2) Please help me. Thank you :D

  Read the article

• Install RT Failed: DateTime >= 0.44 ...MISSING

  - by javano

  I am trying to install RT-4.0.5 (Request Tracker) but I keep getting the following output; $ make fixdeps <output cut> SOME DEPENDENCIES WERE MISSING. CORE missing dependencies: DateTime >= 0.44 ...MISSING make: *** [fixdeps] Error 1 The full output is here (it's quite long); http://pastebin.com/raw.php?i=Tn7GrkYw $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 8.04.4 LTS Release: 8.04 Codename: hardy $ perl --version This is perl 5, version 14, subversion 2 (v5.14.2) built for i686-linux $ cpan --version /usr/local/bin/cpan version 1.57 calling Getopt::Std::getopts (version 1.06 [paranoid]), running under Perl version 5.14.2. [Now continuing due to backward compatibility and excessive paranoia. See ``perldoc Getopt::Std'' about $Getopt::Std::STANDARD_HELP_VERSION.] Nothing to install! I can't see why this is a problem; $ cpan DateTime Going to read '/root/.cpan/Metadata' Database was generated on Thu, 08 Mar 2012 16:11:26 GMT DateTime is up to date (0.72).

  Read the article

• Recover lost NTFS partition on SSD

  - by Emil

  Hello, About 2 month ago I upgraded my Dell Latitude E6500 laptop with a Corsair Force F120 SSD drive. Everything worked well until about a week or so back. I started the computer and was faced with a beep and a message saying "No boot sector on Internal HDD (IRRT). No bootable devices". Since I figured that the boot sector had somehow got corrupt I tried booting from the Windows 7 dvd in order to repair the boot sector. But the Windows 7 installation program only found a blank drive with 111GB of unallocated space. I panicked and brought the drive with me to work to let a colleague have a look at it. We made a disk image of the entire drive and ran the drive through Testdisk in Linux. Testdisk did not find any partitions. It appears that the drive has been completely erased... What has happened? What is causing this behavior on an SSD?

  Read the article

• Desktop Customization: Sci-Fi Icon Packs

  - by Asian Angel

  Are you a sci-fi fan who has been looking for some great custom icons for your desktop or favorite app launcher? Then you will want to have a look through our sci-fi icon packs collection. Over the past few months we’ve been showing you collections of cool desktop wallpapers you can use to liven up your computer. Today we extend the customization collections with a series of cool icon packs for you to use for folders and shortcut icons. Star Wars 1.0 Download Star Wars the Icons Download Star Wars Vehicles Download Star Wars Icons Download Star Trek Download Trek Tech Note: Contains “.png files” for use in Linux. Download Refresh Trek Download Star Trek Folders Download Battlestar Galactica Vol. 1 Download Battlestar Galactica Vol. 2 Download Battlestar Galactica Vol. 3 Download Battlestar Galactica Vol. 4 Download Baby Spaceships Download Space: 1999 Download War of the Worlds   Download Conclusion Now that you have some of these cool icons downloaded, be sure to check out our tutorial on how to customize your icons in Vista and Windows 7. If you’re still using XP check out our article on customizing icons in Windows XP. Also, be you might want to visit our new Desktop Fun section for more customization goodness! Similar Articles Productive Geek Tips Restore Missing Desktop Icons in Windows 7 or VistaWindows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Add Home Directory Icon to the Desktop in Windows 7 or VistaQuick Help: Downloadable Show Desktop Icon for XPDisplay My Computer Icon on the Desktop in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7? Change DNS servers on the fly with DNS Jumper

  Read the article

• what is acceptable datastore latency on VMware ESXi host?

  - by BeowulfNode42

  Looking at our performance figures on our existing VMware ESXi 4.1 host at the Datastore/Real-time performance data Write Latency Avg 14 ms Max 41 ms Read Latency Avg 4.5 ms Max 12 ms People don't seem to be complaining too much about it being slow with those numbers. But how much higher could they get before people found it to be a problem? We are reviewing our head office systems due to running low on storage space, and are tossing up between buying a 2nd VM host with DAS or buying some sort of NAS for SMB file shares in the near term and maybe running VMs from it in the longer term. Currently we have just under 40 staff at head office with 9 smaller branches spread across the country. Head office is runnning in an MS RDS session based environment with linux ERP and mail systems. In total 22 VMs on a single host with DAS made from a RAID 10 made of 6x 15k SAS disks.

  Read the article

• How to configure basic authentication in Apache httpd virtual hosts?

  - by Jader Dias

  I'm trying to configure mercurial access using Apache http. It requires authentication. My /etc/apache2/sites-enabled/mercurial looks like this: NameVirtualHost *:8080 <VirtualHost *:8080> UseCanonicalName Off ServerAdmin webmaster@localhost AddHandler cgi-script .cgi ScriptAliasMatch ^(.*) /usr/lib/cgi-bin/hgwebdir.cgi/$1 </VirtualHost> Every tutorial I read on the internet tells me to insert these lines: AuthType Basic AuthUserFile /usr/local/etc/httpd/users But when I do it I get the following error: # /etc/init.d/apache2 reload Syntax error on line 8 of /etc/apache2/sites-enabled/mercurial: AuthType not allowed here My distro is a customized Ubuntu called Turnkey Linux Redmine

  Read the article

• TeamViewer installed but not running on CentOS

  - by Root

  I followed these http://www.tecmint.com/how-to-install-teamviewer-8-on-linux-distributions/ steps and installed TeamViewer on my CentOS5 server without any errors in SSH but when I try to start TeamViewer I am just getting the following output but I can't find my TeamViewer username and password to try to connect to my server. root@vps [~]# teamviewer Init... Checking setup... Launching TeamViewer... root@vps [~]# teamviwer -info -bash: teamviwer: command not found root@vps [~]# /usr/bin/teamviewer -info Init... Checking setup... Launching TeamViewer... root@vps [~]# whereis teamviewer teamviewer: /usr/bin/teamviewer /etc/teamviewer root@vps [~]# /usr/bin/teamviewer -help Init... Checking setup... Launching TeamViewer... root@vps [~]# Can anyone help me finding my TeamViwer id and password to connect to my Server. Thanks.

  Read the article

• SquidGuard and Active Directory groups

  - by Massimo

  I'm configuring a Linux proxy with Squid and SquidGuard to filter Internet traffic. I know how to authenticate users against Active Directory in Squid, and then how to filter access for users using SquidGuard. The question: how to use Active Directory groups in SquidGuard instead of plain user names? My goal is to be able to configure rules like "members of this group can go anywhere" or "members of this group can only visit certain sites". I know SquidGuard can't manage group membership directly, but it can do LDAP searches on its own; but the syntax to look up wheter a user is member of a given group seems to be quite cryptic, and I couldn't find any good documentation around.

  Read the article

• Get the MakeUseOf eBook Guide to Speeding Up Windows for Free

  - by ETC

  Our friends over at MakeUseOf.com have released yet another eBook in their series of Guides to, well, just about everything. This one gives you some tips for speeding up your Windows PC. The guide has a ton of different tips, and while I wouldn’t necessarily say you follow every single tip to the letter (since everybody’s setup is different), it does give you lots of great ideas for speeding up your PC, as well as links to resources, and instructions for how to perform various cleanup tasks. The best tips? Make sure to keep your PC crapware-free, upgrade your RAM if you’re low, scan for viruses, and run some type of disk cleanup on a regular basis. Download the MakeUseOf Windows on Speed Guide (PDF) [Direct Download Link] Windows on Speed [MakeUseOf] Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware Comix is an Awesome Comics Archive Viewer for Linux Get the MakeUseOf eBook Guide to Speeding Up Windows for Free Need Tech Support? Call the Star Wars Help Desk! [Video Classic] Reclaim Vertical UI Space by Adding a Toolbar to the Left or Right Side of Firefox Androidify Turns You into an Android-style Avatar Reader for Android Updates; Now with Feed Widgets and More

  Read the article

• Letöltheto az Oracle Database Firewall 5.0

  - by Lajos Sárecz

  2010 május 20-án jelentettük be, hogy megvettük az adatbázis tuzfal megoldást fejleszto Secerno céget. Azóta viszonylag keveset lehetett hallani errol a termékrol, idehaza egyedül az oszi ITBN konferencián tartott róla eloadást Stuart Sharp szuk fél órában. Ráadásul a felvásárlás óta a terméket sem lehetett megvásárolni, hiszen a merge után folyó fejlesztések még nem voltak készen. Január 11. óta azonban letötlheto az Oracle Database Firewall 5.0 telepítoje az Oracle edelivery oldaláról az Oracle Database Product Pack-en belül Linux x86 platformra. A Database Firewall az adatbázis védelem elso vonalának tekintheto. Valós idoben monitorozza az adatbázis aktivitását a hálózaton. SQL nyelvi elemzojével rendkívül pontosan képes detektálni a külso és belso támadásokat, a jogosultatlanul, támadó szándékkal végrehajtott tranzakciókat. Az SQL nyelvi elemzojének kifinomultsága lehetové teszi a szurés közel 100%-os pontosságát és megbízhatóságát, ami azért rendkívül fontos, mert nem elég minden támadó tranzakciót kiszurni, de fontos hogy a normál üzletmenetnek megfelelo tranzakciók közül egyet se szurjön, hiszen az is komoly üzleti károkat okozhat. Az adatbázis tuzfalról több részletet tudhat meg mindenki, aki regisztrál és ellátogat a január 27-i Oracle Security Summit rendezvényünkre, ahol a tervek szerint ismét Stuart Sharp tart majd eloadást, viszont ezúttal 1 órában sokkal több részletet tud megosztani a magyar ügyfelekkel és partnerekkel. A Database Firewall eloadást megelozoen egyébként én tartok egy kb. félórás áttekintést az Oracle Database biztonsági megoldásairól.

  Read the article

• Creating a development environment from a shared hosting production environment (LAMP)

  - by bobo

  The production server is shared, I don't have access to php.ini and httpd.conf and most PHP settings cannot be set or overrided using ini_set PHP function. So I would like to create a local development environment having configurations as close as it can be to those of the production environment (LAMP). I don't have shell access to the server but using exec PHP function to run some simple commands is possible. I am using Windows XP Pro and I am going to install on VMWare a linux distribution that is more or less the same as the production server. However, installing apache, mysql and php, and then configuring them like those on the production server is not a easy task. It would be great if there exists any tools that are useful in this situation, tools that can analyze/ inspect the production server and then produce something that can help replicating the environment would be useful. If not, what should I be aware of when I try to manually replicate the production environment?

  Read the article

• re-enabling a table for mysql replication

  - by jessieE

  We were able to setup mysql master-slave replication with the following version on both master/slave: mysqld Ver 5.5.28-29.1-log for Linux on x86_64 (Percona Server (GPL), Release 29.1) One day, we noticed that replication has stopped, we tried skipping over the entries that caused the replication errors. The errors persisted so we decided to skip replication for the 4 problematic tables. The slave has now caught up with the master except for the 4 tables. What is the best way to enable replication again for the 4 tables? This is what I have in mind but I don't know if it will work: 1) Modify slave config to enable replication again for the 4 tables 2) stop slave replication 3) for each of the 4 tables, use pt-table-sync --execute --verbose --print --sync-to-master h=localhost,D=mydb,t=mytable 4) restart slave database to reload replication configuration 5) start slave replication

  Read the article

• Installing MySQL without root access

  - by vinay

  I am trying to install MySQL without root permissions. I ran through the following steps: Download MySQL Community Server 5.5.8 Linux - Generic Compressed TAR Archive Unpack it, for example to: /home/martin/mysql Create a my.cnf file in your home directory. The file contents should be: [server] user=martin basedir=/home/martin/mysql datadir=/home/martin/sql_data socket=/home/martin/socket port=3666 Go to the /home/martin/mysql directory and execute: ./scripts/mysql_install_db --defaults-file=~/my.cnf --user=martin --basedir=/home/martin/mysql --datadir=/home/martin/sql_data --socket=/home/martin/socket Your MySQL server is ready. Start it with this command: ./bin/mysqld_safe --defaults-file=~/my.cnf & When I try to change the password of MySQL it gives the error: Cannot connect to mysql server through socket '/tmp/mysql.sock' How can I change this path and see whether the mysql.sock is created or not?

  Read the article

• Command line DVD to ISO ripper

  - by RandomInsano

  I have an old XBOX with XBMC installed and I want to rip my dvd collection to my home server as ISO files so that I can watch them over the network. My server is headless (no monitor), so I need the software to run on Solaris, Linux or OpenBSD without X11 running. Does such a magical tool exist? I've seen vobcopy, but does that only work on VOBs? Since XBMC supports DVD menus and everything as though it was a straight disc, I'd rather have my backup work exactly as it does without needing my DVD.

  Read the article

• mysql jdbc got ArrayIndexOutOfBoundsException when database name length = 9

  - by Thang Hoang

  this code below will throw : Exception in thread "main" java.sql.SQLException: Unable to connect to any hosts due to exception: java.lang.ArrayIndexOutOfBoundsException: 40 mysql 5.1, jdbc driver 5.1.21 if I change connection string to any database have name's lengh != 9, it will pass to print 'connected'. or I create other database as '123456789' it throw same exception. I connect to other database on amazon s3, that have same name length, it throw java.lang.ArrayIndexOutOfBoundsException: 43. this database version is 'mysql Ver 14.14 Distrib 5.5.28, for debian-linux-gnu (i686) using readline 6.2 ' any idea of this weird mysql behavior, thanks public class MysqlConnection { public static void main(String[] args) throws Exception { Connection conn = null; String userName = "root"; String password = "123456"; String url = "jdbc:mysql://localhost:3306/test12345"; Class.forName ("com.mysql.jdbc.Driver").newInstance (); conn = DriverManager.getConnection (url,userName, password); System.out.println ("Connected"); } }

  Read the article

• SD to PCI adapter

  - by vy32

  We are looking for a way to plug a SD card into a PCI slot without going through a USB interface. We want to read the SD card's serial number directly and issue SD commands. The Chumby and the Google Android G1 phones both have SD slots that you can read from Linux without going through USB, but the Chumby only has a single SD card that's used for booting, and the G1 doesn't have any other reasonable storage if you use the SD card for that purpose. I'd really like a desktop with a few SD slots that are directly accessible. Anybody know of anything??

  Read the article

• guvciew/youtube problem

  - by Anonymous

  I'm fairly new to Linux. Running on 12.10 Ubuntu. I've been running into some problems recording videos. Cheese crashes (as I've read from other users), YouTube will not allow me to select Allow (flash in Chrome and in Firefox). I managed to get 1 video uploaded from my cam and it worked about half the time, cut the audio off, lagged, etc. My computer is fine 4gigs, 32-bit i5 so it shouldn't be a problem. Now onto guv, I managed to get 1 video to work and after that every video I save it comes up with an orange file that looks like a film. I tried to change the file name, open in VLC, everything. I love Ubuntu and I'm never going back to Windows, ever One other thing to note is I am allowed to click "allowed" in Tiny chat. I even went to the adobe website to allow everything to bypass allow, deny option and nothing. Even went out of my way to add youtube/upload/cam for it to allow it and nothing. I realize right now Flash has been terrible for the past couple of months (especially in Chrome). What my question is well first and foremost, how do I fix this, if possible? I've thought about running Wine but I haven't heard anything good about it and I've already re reformated Ubuntu twice. Is there a codec pack I need too? Like I said everything works fine, especially in Chrome. It allows me to broadcast, no lag, and my mic works fine. guv would be my best option at this point because everything I've tried has given me nothing but trouble Thanks and I hope you guys can give me an answer. I've been at this for 2-3 days straight now. I could even go out of my way to not use Youtube and use something similar if it came down to it.

  Read the article

• ArchBeat Top 20 for March 11-17, 2012

  - by Bob Rhubart

  The 20 most-clicked links as shared via my social networks for the week of March 11-17, 2012. Start Small, Grow Fast: SOA Best Practices article by @biemond, @rluttikhuizen, @demed Packt Publishing offers discounts of up to 30% on 60+ Oracle titles IT Strategies from Oracle; Three Recipes for Oracle Service Bus 11g ; Stir Up Some SOA Oracle Cloud Conference: dates and locations worldwide Applications Architecture | Roy Hunter and Brian Rasmussen How Strategic is IT? - Assessing Strategic Value | Al Kiessel White Paper: An Architect’s Guide to Big Data | Dr. Helen Sun, Peter Heller Getting Started with Oracle Unbreakable Enterprise Kernel Release 2 | Lenz Grimmer Great Solaris 10 features paving the way to Solaris 11 | Karoly Vegh Who the Linux Developer Met on His Way to St. Ives | Rick Ramsey Peripheral Responsibilities Required for Large IDM Build Outs (Including Fusion Apps) | Brian Eidelman IOUG Real World Performance Tour, w/Tom Kyte, Andrew Holdsworth, Graham Wood Configure IPoIB on Solaris 10 branded zone | Leo Yuen Oracle OpenWorld 2012 Call for Papers Use Case Assumptions versus Pre-Conditions | Dave Burke Handling Custom XML documents in Oracle B2B | @Biemond Building a Coherence Cluster with Multiple Application Servers | Rene van Wijk XMLA vs BAPI | Sunil S. Ranka The Java EE 6 Example - Running Galleria on WebLogic 12 - Part 3 | @MyFear Public Sector Architecture | @jeremy_forman, @hamzajahangir Thought for the Day "The goal of Computer Science is to build something that will last at least until we've finished building it." —Anonymous

  Read the article

• Java file manager won't load in Firefox

  - by Arthur

  I am using Webmin and I can't get the file manager to load in Firefox. It is a simple, Java based file manager. When I try to load it I get the following error: This module requires java to function, but your browser does not support java Internet Explorer works fine and I have yet to try on Chrome. Java is installed and I have the same problem on Windows and Linux. Java seems to work fine with everything else, with the exception of webcams. Any advice on the issue would be appreciated. Edit: I just checked and it doesn't work in Chrome either.

  Read the article

• Installation procedure RAC One Node

  - by rene.kundersma

  Okay, In order to test RAC One Node, on my Oracle VM Laptop, I just: - installed Oracle VM 2.2 - Created two OEL 5.3 images The two images are fully prepared for Oracle 11gr2 Grid Infrastructure and 11gr2 RAC including four shared disks for ASM and private nics. After installation of the Oracle 11gr2 Grid Infrastructure and a "software only installation" of 11gr2 RAC, I installed patch 9004119 as you can see with the opatch lsinv output: This patch has the scripts required to administer RAC One Node, you will see them later. At the moment we have them available for Linux and Solaris. After installation of the patch, I created a RAC database with an instance on one node. Please note that the "Global Database Name" has to be the same as the SID prefix and should be less then or equal to 8 characters: When the database creation is done, first I create a service. This is because RAC One Node needs to be "initialized" each time you add a service: The service configuration details are: After creating the service, a script called raconeinit needs to run from $RDBMS_HOME/bin. This is a script supplied by the patch. I can imagine the next major patch set of 11gr2 has this scripts available by default. The script will configure the database to run on other nodes: After initialization, when you would run raconeinit again, you would see: So, now the configuration is ready and we are ready to run 'Omotion' and move the service around from one node to the other (yes, vm competitor: this is service is available during the migration, nice right ?) . Omotion is started by running Omotion. With Omotion -v you get verbose output: So, during the migration you will see the two instance active: And, after the migration, there is only one instance left on the new node:

  Read the article

• How to Upgrade Your Verizon Mi-Fi Firmware to Fix Connection Problems

  - by The Geek

  If you’ve got a Verizon Mi-Fi and you’re having problems with it disconnecting all the time, there’s a quick and easy fix—you’ll just need to upgrade the firmware to the latest version. Here’s how to do it, and fix your connection issues. If you aren’t experiencing any issues at all, you might not want to upgrade, but in our experience, the Mi-Fi will sometimes disconnect in certain areas—and this is the solution. Once you’ve run the update, the problems are mostly gone. Note: there are a number of difference Mi-Fi type of devices from Verizon, and the same process should work for all of them. Latest Features How-To Geek ETC The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek The How-To Geek Guide to Learning Photoshop, Part 7: Design and Typography Happy Snow Bears Theme for Chrome and Iron [Holiday] Download Full Command and Conquer: Tiberian Sun Game for Free Scorched Cometary Planet Wallpaper Quick Fix: Add the RSS Button Back to the Firefox Awesome Bar Dropbox Desktop Client 1.0.0 RC for Windows, Linux, and Mac Released Hang in There Scrat! – Ice Age Wallpaper

  Read the article

• Turn Windows Event Logs EVT files into Syslog to send to LogLogic

  - by TrevJen

  I have a a requirement to analyze 13gb of Windows logs by feeding it into a LogLogic Log aggregator. LogLogic is essentially Linux Syslog server, it can take a Syslog (Tcp/udp 514) feed or log on to a windows share and pull a flat file log. The only problem is that it cannot read the binary .EVT files from Windows Event logs. Normally, I would use Lasso to end the logs to a loglogic as syslog, but it has to read the logs from WMI and uses the DLLs on the log source host to format them and transmit them as syslog in the formatting that LogLogic expects. Does anyone know: A. Is there some kind of product out there to do this? or - B. Is there some way to import them into a Windows event veiwer in a way that lasso (or snare for that matter) will see them as actual real event logs on that host and forward them to the loglogic device as syslog.

  Read the article

• Ubuntu 14.04 boot error on Windows 8.1 - SYSLINUX 4.07 EDD

  - by nainai

  I want to replace Windows 8.1 that came with my laptop with Ubuntu 14.04. I keep getting a black screen with this line: SYSLINUX 4.07 EDD 2013-07-25 Copyright (C) 1994-2013 H. Peter Anvin et al Things I did before: turned off fast boot disabled secure boot switched to Legacy instead of UEFI (even though a tutorial I found said this isn't really needed anymore, I still did anyway because I read it from the laptop's user guide: "If you need to install a legacy operating system, such as Windows (that is, any operating system before Windows 8), Linux or Dos, etc on your computer, you must change the boot mode to Legacy support." I chose to load from USB. and then that SYSLINUX 4.77 EDD.... appears I tried to install using the same USB on an old Lenovo S10-3. It worked. Though that S10-3 runs Lubuntu. Still it's probably safe to say that it's not the USB that has problems, right? Thanks for any help. I can't wait to have Ubuntu :) edit: This might be useful info. The USB is 16GB X-Stor Fat32. I used YUMI.

  Read the article

• Multi language support in wireshark

  - by Ajay

  Do we have multiple language support with Wireshark. We are using Windows Xp SP2 and Ubuntu Linux environment. Actually we have a plugin which is UDP based and we have a requirement to Analyse the Information in Packet List Pane and Packet Details Pane to be viewed in other languages like French, German, Italian etc ... So is it possible with Wireshark version - 1.2.0. For e.g. Can we also have all the Menu Items etc ... all text in Wireshark which is there in English to be seen in French, German and Italian.

  Read the article

< Previous Page | 783 784 785 786 787 788 789 790 791 792 793 794  | Next Page >