Search Results

Search found 2316 results on 93 pages for 'cmd'.

Page 79/93 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• Time Drift on VM servers, need a reliable solution

  - by zeroasterisk

  We have some windows server 2008 VMware instances on multiple physical servers (hosted) and an application which requires the time to be synced across the server instances. Obviously, VMware has problems with this and we really have never gotten it working any better, we have setup the servers to poll for an NTP update every minute which mitigates the problem (in a fairly crude way). Except that every once in a while, the update will fail (because there's already too much drift) and then windows never does an NTP update afterwards which eventually allows the servers to drift far enough apart that our application breaks, and we notice. We are thinking about changing hosts to Xen servers on approximately the same setup, and I anticipate similar problems. can anyone tell me if Xen has the same time-drift issues VMware does, for guests? can anyone tell me what the best windows server settings are for syncing with an external NTP server to keep things in sync: how frequently do you recommend syncing? (assuming every minute) do you recommend running our own NTP server - even if it has to be on a virtual instance? (assuming not) is there any way to tell windows to sync with the NTP server no matter what the time difference is? any other suggestions for keeping windows servers time in sync? I have become familiar with [ http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1318 ] and it's helped, but it's not been totally effective (see above). thanks much!

  Read the article

• v2v of RHEL5 box - issues with retaining MAC address

  - by Alex Berry

  For the last week we have been troubleshooting a customer's Red Hat Virtual Machine running on ESXi. We've been using Veeam to try to create a replica off-site and have been having getting it to work on a decent schedule and recently we noticed that there were issues with orphaned snapshots while looking at the datastore. You can see several snapshots in the same folder and it's causing issues with replication and backup, so we decided the cleanest way was to v2v the machine to another datastore so that we had a clean single-vmdk setup to work with, this is where our trouble started. We first started off with a v2v using vmware converter and connecting to the powered on machine as we were having issues doing an offline v2v. This copied fine but when I tried to set a static MAC using this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=507 the new VM wouldn't take the address, it simply obtained a new MAC, received a dhcp lease and then would only boot up to a blank red screen, never the login screen. So the next step was to do an offline v2v, once we finally got it working. Same thing, followed the kb to the letter and still it wouldn't take the MAC. I then tried it again and upon completion I compared both old and new VMX file, copying every identifier and variable possible, then unregistered both VMs, uploaded the new VMX file and booted, only to see the same results. Finally I did the same as above but I copied the disk using DD to a second attached vmdk and then attached this to the new VM, and still no luck. After downloading the modified VMX file after the first boot and comparing it to the original I created I found that the bios uuid had changed from the one I typed in manually, so I'm assuming this may be the snagging point, but I have no idea. I've never had this issue before on a P2V and I'm just wondering if someone could shed some light on this, maybe it's to do with RHEL licencing?

  Read the article

• diskmgmt.msc: Cannot delete volume from USB

  - by Notinlist

  I have an USB drive with about 8GB of size. It has a single partition of size 169MB. Don't know why, I got it that way. I wanted to delete this small (FAT32) partition and create a single NTFS volume on it. First, I noticed that the "Delete volumme" option is disabled (grayed out). I then tried "Change drive letter and paths..." and removed "F:", that way I made sure that there are no open files on it. The "Delete volume" was still disabled. Then I got suspicious, and right clicked on the "Unallocated" area and I noticed that I did not have any useful option. All "New * volume" items are disabled. I exited from diskmgmt.msc, ran a cmd.exe with administrator privileges, ran the diskmgmt.msc from it, same experiences. Why can't i do anything with this disk? I've read some advices about downloading some alternative free software, but I rather not do it if possible. I still hope that Windows 7 Enterprise 64bit alone can reinitialize an USB drive without external help. I also cannot do anything with my other 8GB pendrive. It's all an NTFS volume, I tried to delete it, but the option is disabled here too. Maybe I have some settings somewhere that prevents my from partitioning USB disks. (I have the freedom to remove my D: partition which is the second - not counding the "System reserved" - on my SSD disk.)

  Read the article

• kill a hung mount process

  - by John P

  I have a virtual machine drive that ran out of space, so I shutdown the VM, extended the volume using lvextend. After resizing the partition (ext3), I ran e2fsck on it, and it found and corrected errors. Unfortunately, when I ran efsck one more time, there were more errors that had to be fixed. I went through 3 rounds of e2fsck before I decided to try mounting it to clean up some space manually. I tried mounting it, but the mount process hung. I tried to "kill -9" the mount process, but that did not kill it. I killed the parent process, but that did not kill it either. Any ideas on how to kill a rogue mount process? Some evidence: ps -l 13292 F S UID PID PPID C PRI NI ADDR SZ WCHAN TTY TIME CMD 4 R 0 13292 1 99 85 0 - 17964 - ? 11:27 mount /dev/mapper/xen7-123p3 /tmp/p3/ lsof -p 13292 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME mount 13292 root cwd DIR 9,2 4096 25264129 /root mount 13292 root rtd DIR 9,2 4096 2 / mount 13292 root txt REG 9,2 61656 2916434 /bin/mount mount 13292 root mem REG 9,2 144776 31457282 /lib64/ld-2.5.so mount 13292 root mem REG 9,2 1718232 31457284 /lib64/libc-2.5.so mount 13292 root mem REG 9,2 23360 31457291 /lib64/libdl-2.5.so mount 13292 root mem REG 9,2 43808 31457783 /lib64/libblkid.so.1.0 mount 13292 root mem REG 9,2 247496 31457331 /lib64/libsepol.so.1 mount 13292 root mem REG 9,2 95464 31457337 /lib64/libselinux.so.1 mount 13292 root mem REG 9,2 154640 31457491 /lib64/libdevmapper.so.1.02 mount 13292 root mem REG 9,2 17936 31457472 /lib64/libuuid.so.1.2 mount 13292 root mem REG 9,2 56438208 12684878 /usr/lib/locale/locale-archive mount 13292 root 0u CHR 136,11 0t0 13 /dev/pts/11 (deleted) mount 13292 root 1u CHR 136,11 0t0 13 /dev/pts/11 (deleted) mount 13292 root 2u CHR 136,11 0t0 13 /dev/pts/11 (deleted) umount -f /tmp/p3/ umount2: Invalid argument umount: /tmp/p3/: not mounted

  Read the article

• Ubuntu hard disk getting SATA errors

  - by Henadzy

  I am getting "UNC" errors on a hard disk on Ubuntu 9.10. It slows down my system, applications have not been responding for a long time. But when I mount the filesystem on another computer, it works properly. disk: SAMSUNG HD161HJ (SATA) syslog: Apr 25 00:28:25 vare6gin kernel: [ 885.773839] ata3.00: exception Emask 0x1 SAct 0x1e SErr 0x0 action 0x6 frozen Apr 25 00:28:25 vare6gin kernel: [ 885.773845] ata3.00: Ata error. fis:0x21 Apr 25 00:28:25 vare6gin kernel: [ 885.773861] ata3.00: cmd 60/08:08:3f:00:ad/00:00:10:00:00/40 tag 1 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773864] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773871] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773877] ata3.00: error: { UNC } [...snip 3 similar repeats of last 4 lines; see revision history for full log...] Apr 25 00:28:25 vare6gin kernel: [ 885.773970] ata3: hard resetting link Apr 25 00:28:25 vare6gin kernel: [ 885.773974] ata3: nv: skipping hardreset on occupied port Apr 25 00:28:25 vare6gin kernel: [ 886.240073] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 25 00:28:25 vare6gin kernel: [ 886.256277] ata3.00: configured for UDMA/133 Apr 25 00:28:25 vare6gin kernel: [ 886.256305] ata3: EH complete Apr 25 00:28:27 vare6gin kernel: [ 888.176088] ata3: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF Apr 25 00:28:27 vare6gin kernel: [ 888.176099] ata3: SWNCQ:qc_active 0xF defer_bits 0x0 last_issue_tag 0x3 Apr 25 00:28:27 vare6gin kernel: [ 888.176102] dhfis 0xF dmafis 0x1 sdbfis 0x0 Apr 25 00:28:27 vare6gin kernel: [ 888.176109] ata3: ATA_REG 0x51 ERR_REG 0x40 Apr 25 00:28:27 vare6gin kernel: [ 888.176113] ata3: tag : dhfis dmafis sdbfis sacitve Apr 25 00:28:27 vare6gin kernel: [ 888.176120] ata3: tag 0x0: 1 1 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176126] ata3: tag 0x1: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176131] ata3: tag 0x2: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176136] ata3: tag 0x3: 1 0 0 1

  Read the article

• Windows7 corrupted profile - prevention exists?

  - by Radek

  I have dedicated Windows7 (not on domain) virtual machine for overnight automation testing. Some commands (mySQLdump, tscon.exe) must be run under administrator account. Last week administrator account's profile was corrupted. I fixed it by renaming it in the registry and logging in as administrator. And today it is corrupted again. I use administrator account only to run above commands via runas. Also the computer is restarted via cmd - shutdown command - quite often. Especially every night before automation testing starts. I checked the comp for viruses - did full scan using avast although I believed that the comp is clean. Any idea how to prevent the profile to get corrupted again? update So the first log entry in event log is today from 1.15am and one of my scripts ran runas command as administrator exactly at 1.15am. It was second time that runas war executed though after the testing started. The same happened second day in a row. Before the testing starts I need to copy one file that is locked. So I run handle.exe from runas to unlock it. That is what I think causing the profile to get corrupted. I am not able to reproduce it by myself. The message from event viewer is Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile. DETAIL – The process cannot access the file because it is being used by another process.

  Read the article

• When ran as a scheduled task, cannot save an Excel workbook when using Excel.Application COM object in PowerShell

  - by Daniel Richnak

  I'm having an issue where I've automated creating an Excel.Application COM object, add some data into a workbook, and then saving the document as an xlsx. This works fine if: I'm already in Powershell interactive host and either run each command in sequence, or execute as a ps1. I run it from cmd.exe, using the syntax: powershell.exe -command "c:\path\to\powershellscript.ps1" I create a scheduled task in Windows 7 / Server 2008 R2, use the above powershell.exe -command syntax, and use the mode "Run only when the user is logged on". It fails when I modify the same scheduled task, but set it to "run whether the user is logged on or not". Here's a sample script that illustrates the problem I'm having: $Excel = New-Object -Com Excel.Application $Excelworkbook = $Excel.Workbooks.Add() $excelworkbook.saveas("C:\temp\test.xlsx") $excelworkbook.close() I have a theory that the COM object fails somehow if my profile isn't loaded / if it's not performed in a command window. Any ideas on which options to choose when creating the scheduled task, or which options to use when creating the Excel object or using the SaveAs() function? Can anybody reproduce this? I've been able to see this behavior on both a Server 2008 R2 machine, and Windows 7. Haven't tried other platforms.

  Read the article

• Mongo daemon restarts after replica set issue

  - by Matt Beckman

  We had a recent election in our replica set (2 read nodes; 1 write node) that changed the primary node. Curious as to why this occurred, I started looking through the logs to find out what happened. It appears that mongoNode2 could not communicate with mongoNode3. When both nodes could not communicate, it appears that this caused the services on mongoNode2 and mongoNode3 to restart, eventually resulting in a new primary after the services had been started again. Thu Jun 23 08:27:28 [ReplSetHealthPollTask] DBClientCursor::init call() failed Thu Jun 23 08:27:28 [ReplSetHealthPollTask] replSet info mongoNode3:27017 is down (or \ slow to respond): DBClientBase::findOne: transport error: mongoNode3:27017 query: { \ replSetHeartbeat: "myReplSet", v: 3, pv: 1, checkEmpty: false, from: \ "mongoNode2:27017" } Thu Jun 23 08:27:29 got kill or ctrl c or hup signal 15 (Terminated), will \ terminate after current cmd ends Thu Jun 23 08:27:29 [interruptThread] now exiting Thu Jun 23 08:27:29 dbexit: Is there any reason that the mongo service would restart due to a DBClientCursor::init call() failure? Is this a known bug? It should be noted that mongoNode2 and mongoNode3 are VMs on the same VMware host. MongoNode1 is not on the same host, and it did not have any issues with the service. However, I did not have any other reports of issues with other VMs on the VMware host.

  Read the article

• Delete on windows vista and seven -- discovery process

  - by M'vy

  Hi SUs! I've recently encountered a problem. Using svn at work I needed to clear some space. As you may know svn directories are full of sub-directories and files. So the delete process begins with a step of discovering the items to be deleted (I guess this is for displaying the progress bar). But in my case it ended up to be still running after I watched Braveheart (Off-topic: good film in my opinion. On-topic: and it last 2h50) and counting 440 000+ files. I finally decided to cut off the process and use the good old cmd with a del <directory> to do the job. (Done in some minutes) So I'm wondering if someone know how to override the system to make it actually begins the process while scanning the other items? At the end, I just want the file to be deleted and I don't care the number of files to be deleted. On the contrary I care about the time it takes. Thanks

  Read the article

• Mailgun Is Not Detecting My New MX Records

  - by Tyler Crompton

  When I issue a DiG command to verify my MX records, I get the following output: $ dig example.com MX ; <<>> DiG 9.9.5-3-Ubuntu <<>> example.com MX ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 47700 ;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 5, ADDITIONAL: 5 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 4096 ;; QUESTION SECTION: ;example.com. IN MX ;; ANSWER SECTION: example.com. 85468 IN MX 10 mxa.mailgun.org. example.com. 85468 IN MX 10 mxb.mailgun.org. ;; REMAINDER OF OUTPUT REMOVED FOR BREVITY However, when I click "Check DNS Records Now" on Mailgun, it verifies the changes to the TXT and CNAME records but says that my MX records have not been changed. Type | Priority | Enter This Value | Current Value -----+----------+------------------+-------------------- MX | 10 | mxa.mailgun.org | 10 mail.example.com MX | 10 | mxb.mailgun.org | 10 mail.example.com I updated these records three to fours ago. I know it said to wait up to twenty-four to forty-eight hours. But I feel that if it detected the other DNS changes, then it should detect the MX record changes. Am I being impatient or is this a legitimate concern? What do you suggest I do? Note: I'd create a Mailgun tag for this; I feel that it'd be appropriate, but I don't have enough reputation to do so.

  Read the article

• Extremely Weird Computer Problem

  - by waiwai933

  Well, having worked with computers a long time, I thought I had seen everything that could go wrong with a computer. Today, I learned that I was wrong. My Mac has been behaving extremely weirdly. While the keyboard is fine, the mouse holds extremely weird behavior. It will open apps from the Dock, but not open documents from a Stack. The top menu bar will work, but only after I restart Finder. I am unable to close most windows, except with Cmd+Q. Clicking on a link in Safari, for some reason, opens it in a new tab. I can not select checkboxes, but I know a click is going through because you can see a quick indent in the check box, before it reverts to the unchecked state. I've restarted my computer, as well. I don't see a virus when looking through top, but I guess it could be subverting top. Does anyone have an idea what is going on?

  Read the article

• TEMP environment variable occasionally set incorrectly

  - by Roger Lipscombe

  Occasionally, I find my TEMP and TMP environment variables set to C:\Windows\TEMP. They should be set to %USERPROFILE%\AppData\Local\Temp, and are configured correctly in System Properties. This manifests itself as error messages like the following: ---> System.InvalidOperationException: Unable to generate a temporary class (result=1). error CS2001: Source file 'C:\Windows\TEMP\gb_pz65v.0.cs' could not be found error CS2008: No inputs specified ...which occurs in various .NET applications (in particular Visual Studio 2010 or SQL Server Management Studio). Alternatively, SQL Server Management Studio will report: Value cannot be null. Parameter name: viewInfo (Microsoft.SqlServer.Management.SqlStudio.Explorer) If I run PowerShell elevated, then $env:TEMP is set correctly. If I run PowerShell non-elevated, then it's not. I believe that it should be set correctly in both cases. If not, it's the wrong way round. The same is true for CMD.EXE. Rebooting fixes it, temporarily, until something breaks it again. Presumably something loaded into Explorer.exe is messing with its environment variables, but what? The values in the registry are correct, even while this is happening: HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment has TEMP = %SYSTEMROOT%\Temp HKCU\Environment has TEMP = %USERPROFILE%\AppData\Local\Temp By setting a breakpoint on shell32!RegenerateUserEnvironment, I'm able to trap it when it happens, but I still don't know why explorer.exe is reading the wrong environment variables. I can reproduce it consistently by broadcasting a WM_SETTINGCHANGE message (I wrote a one-line C++ program to do this). Watching the activity in Process Monitor shows that explorer.exe doesn't even look at HKCU\Environment. What is going on?

  Read the article

• Windows 7 Startup fails after installation

  - by Nadav S.

  I have installed Windows 7 Ultimate a week ago. Yesterday I've noticed that the SP1 update is available. After installation of SP1 the computer failed to startup, and had shown a black screen. I couldn't even go to safe mode and F8 didn't help. After some fixing attempts including system restore, startup repair, bootmgr & BCD rebuilding from CMD, I have decided to reinstall Windows (after all, it's only a week old) After the successful installation, I have decided to first install all available updates before I continue. So after the updates download & installation, the computer rebooted. And now I didn't see the black screen again - but in the "Starting Windows..." screen the logo didn't appear and the system didn't startup. Here I could go to safe mode selection window, but it didn't work either ("Loading Windows Files" but nothing). I've also tried: I thought that the CD was corrupted, so I've used a fresh new disk of Windows, tried x86 & x64 versions, the same symptoms, no change. Resetted the BIOS to default, no change. Memory diagnostic HDD diagnostic Restarted Windows WITHOUT INSTALLING UPDATES, but it had the same symptom, so maybe Windows Update is not the case?! I've tried installing it so many times - that I am simply stuck - I can't "reinstall Windows, because it is corrupted...". Maybe the HDD is corrupted? I've also checked it and didn't find a problem.

  Read the article

• What is wrong with those crontabs?

  - by Guillaume Boudreau

  I want my projectors to Power On before the mall opens, and Power Off when the mall closes. So I created crontab entries (that I placed in /etc/cron.d/mall), but today (Thu Nov 22 18:58:29 EST 2012 is the current date on that server), the power-off.sh script got executed at 17:20 (see syslog excerpt below). Being Thu, Nov. 22, I would have expected the power-off.sh script to be executed at 21:20, per the 4th crontab line below. Why did power-off.sh execute at 17:20? What is wrong with my crontab entries? Content of /etc/cron.d/mall: 40 9 22-30 Nov Mon-Sat myuser /usr/local/projectors/power-on.sh 40 10 22-30 Nov Sun myuser /usr/local/projectors/power-on.sh 20 18 22-30 Nov Mon-Wed myuser /usr/local/projectors/power-off.sh 20 21 22-30 Nov Thu-Fri myuser /usr/local/projectors/power-off.sh 20 17 22-30 Nov Sat-Sun myuser /usr/local/projectors/power-off.sh 40 9 1-22 Dec Mon-Sat myuser /usr/local/projectors/power-on.sh 40 10 1-22 Dec Sun myuser /usr/local/projectors/power-on.sh 20 21 1-22 Dec Mon-Fri myuser /usr/local/projectors/power-off.sh 20 17 1-22 Dec Sat-Sun myuser /usr/local/projectors/power-off.sh syslog excerpt: $ grep power-off.sh /var/log/syslog Nov 22 17:20:01 lanner-ubu-c2d CRON[23007]: (myuser) CMD (/usr/local/projectors/power-off.sh)

  Read the article

• Nginx + WordPress + HHVM: Why isn't Batcache working? Would Varnish help even more?

  - by javipas

  I've heard great things about HHVM, so I've setup a copy of WordPress blog (on another domain) with Nginx (with the Pagespeed module) and HHVM. Right now the benefits are obvious: on the same config, load times are between two and three times faster. I'm trying to speed up things a little bit, and I've also installed Memcached and Batcache. I've installed the memcached package, copied object-cache.php (Pastebin) onto the root folder of the WordPress blog, and after that I've installed the Batcache plugin and copied the advanced-cache.php (Pastebin) file onto the wp-content folder. Also, I've included the line define('WP_CACHE', true); in the wp-config.php file. It seems it doesn't work, though. If I quickly reload the page several times Batcache should show the cached page, but it doesn't. It's easy to check that by reloading (Cmd+R on Chrome on OS X) the page several times and then viewing the page's code. Under the <head> section I should see some batcache stats, but they aren't there. I wonder if someone could give me some hint on this. On a side note, I don't know if I could add some other component in order to help the performance be even better. I'm thing about Varnish, but I'm not sure if it's just useless and it's just another way to the same I'm currently doing. Any other component there? (I'll test CDN for images, minifying js, etc and some other tricks as well, but I'm talking from the server perspective).

  Read the article

• no A record show in the answer section in dig results

  - by eric low

  To check the record for the domain, run dig with domain name as the parameter. dig example.com any I get the below result. Why there is no A record show in the result. What did i do wrong during the setup. Please advice what suppose to look into it. Hope everyone can help me to resolve the case asap. ; <<>> DiG 9.9.3-P2 <<>> example.com any ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 44674 ;; flags: qr rd ra; QUERY: 1, ANSWER: 8, AUTHORITY: 4, ADDITIONAL: 1 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 4096 ;; QUESTION SECTION: ;example.com. IN ANY ;; ANSWER SECTION: example.com. 3489 IN MX 100 biz.mail.com. example.com. 3482 IN NS ns1.domain.com. example.com. 3482 IN NS ns2.domain.com. ;; AUTHORITY SECTION: example.com. 3482 IN NS ns2.domain.com. example.com. 3482 IN NS ns1.domain.com. ;; Query time: 0 msec ;; SERVER: xxx.252.xxx.xxx#53(xxx.252.xxx.xxx) ;; WHEN: Wed Oct 30 04:48:34 CDT 2013 ;; MSG SIZE rcvd: 349

  Read the article

• Windows Explorer and UAC: run elevated

  - by syneticon-dj

  I am profoundly annoyed by UAC and switch it off for my admin user wherever I can. Yet, there are situations where I can't - especially if those are machines not under my continuous administration. In this case, I am always challenged with the task of traversing directories using my administrative user via the Windows Explorer where regular users do not have "read" permissions. The possible two approaches to this problem so far: change the ACLs to the directory in question to include my user (Windows conveniently offers the Continue button in the "You don't currently have permissions to access this folder" dialog. This obviously sucks since more often than not I do not want to change ACLs but just look into the folder's contents use an elevated cmd.exe prompt along with a bunch of command line utilities - this usually takes a lot of time when browsing through large and / or complex directory structures What I would love to see would be a way to run Windows Explorer in elevated mode. I have yet to find out how to do so. But other suggestions solving this problem in an unobtrusive way without changing the entire system's configuration (and preferably without the need for downloading / installing anything) are very welcome, too. I have seen this post with a suggestion for altering HKCR - interesting, but it changes the behavior for all users, which I am not allowed to do in most situations. Also, some folks have suggested using UNC paths to access the folders - unfortunately this does not work when accessing the same machine (i.e. \\localhost\c$\path) as the "Administrators" group membership is still stripped from the token and a re-authentication (and thus the creation of a new token) would not happen when accessing localhost.

  Read the article

• ssh initial prompt hangs for 10 minutes but console login and initial prompt is very responsive - why?

  - by rfreytag

  I have been running an ESXi 4.0 server for months with a couple of WinServer2003 and several Ubuntu Server 10.4 VMs. The performance has been impressive on 6GB i7 Asus P6T hardware. Suddenly, a week ago, ssh logins to the Ubuntu VMs take 10 minutes when connecting over the LAN (over a WAN the connection (pipe) is broken long before that). When logging in to these VMs the password prompt arrives immediately, and failed passwords are responded to immediately. But the moment I log in then the shell prompt appears and I hang for many minutes. Sometimes the connection hangs before the shell prompt appears and sometimes I can type in a command but the moment I hit return the machine hangs. 10 full minute later control returns and the VM is responsive. NOTE: there are several Ubuntu VMs on the same host machine that are identical in all ways that I can tell. However, only one of the VMs displays this behavior. That is why I mention the ESXi host in passing - I don't think it has anything to do with the problem. This behavior is never seen when I connect with the troubled-VM's console (through vSphere Client). From the console the Ubuntu VMs all respond beautifully. I have seen: http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1003496&sliceId=1&docTypeID=DT_KB_1_1&dialogID=229586372&stateId=1%200%20229588522 ...and since that relates to delays in seeing the password prompt that does not appear to be the solution here. Any other suggestions very welcome - thank you.

  Read the article

• Windows 7 ICS client web failure

  - by n8wrl

  I have several windows 7 PC's connected on a LAN via a hub. One has a Verizon 3G connection and works great. I have internet connection sharing enabled on it, which automagically set the LAN connection to 192.168.137.1 and enabled DHCP. I am trying to get the client PC's working one at a time. The others are off. The client is able to: Get an IP via DHCP with correct settings. Ping any web address I can throw at it, so DNS and routing are working. Windows update works. But web sites hang in IE. All but google.com! I type www.msn.com, microsoft.com, amazon.com, etc. etc. All ping via a cmd window but IE just hangs - it says web site found but the green progress bar just slowly creeps and no content displays. www.google.com comes up even after clearing browser and dns cache. I am pulling my hair out - what am I missing? EDIT: After some more gyrations with a router I'm back to ICS. Same symptoms, only now I have an answer to Andrew's question, YES I can do Google searches but clicking on any of the result links hangs! Let one sit for half an hour with no timeout or error.

  Read the article

• Set primary group of file or directory on Samba share from Windows

  - by Hubert Kario

  Short version: I have such situation on a Samba share: $ ls -lha total 12K drwxr-xr-x 3 hka Domain Users 4.0K Jan 11 17:07 . drwxrwxrwt 19 root root 4.0K Jan 11 17:06 .. drwxr-xr-x 2 hka Domain Users 4.0K Jan 11 17:07 dir A -rw-r--r-- 1 hka Domain Users 0 Jan 11 17:07 file A How am I able to change this to following using only Windows SMB/CIFS client (using 3rd party applications is OK) $ ls -lha total 12K drwxr-xr-x 3 hka Domain Users 4.0K Jan 11 17:07 . drwxrwxrwt 19 root root 4.0K Jan 11 17:06 .. drwxr-xr-x 2 hka ntpoweruser 4.0K Jan 11 17:07 dir A -rw-r--r-- 1 hka ntpoweruser 0 Jan 11 17:07 file A Rationale and background info I'm using POSIX ACLs on Samba shares. Together with acl group control for Samba, it allows me to delegate management of permissions to different users based on group membership. Thing is, when I create a new file on a Samba share, I'm unable to set its primary group (the one that grants permission to change its permissions). It's being set to my primary group (Domain Users) or group set using force group option in smb.conf share definition. Removing all groups in windows except the one I want to become the new primary group doesn't work. I can change it using chgrp group folder/ as regular user though shell, but it's suboptimal (not all users are *nix users). Trying to set new owner to group from Windows file permission window makes the Samba to return permission denied with following log entry: [2012/01/05 21:13:03.349734, 3] smbd/nttrans.c:1899(call_nt_transact_set_security_desc) call_nt_transact_set_security_desc: file = projects/project A/New folder, sent 0x1 [2012/01/05 21:13:03.349774, 3] smbd/posix_acls.c:1208(unpack_nt_owners) unpack_nt_owners: unable to validate owner sid for S-1-5-21-4526631811-884521863-452487935-11025 [2012/01/05 21:13:03.349804, 3] smbd/error.c:80(error_packet_set) error packet at smbd/nttrans.c(1909) cmd=160 (SMBnttrans) NT_STATUS_INVALID_OWNER The SID is correct and belongs to group I specified in GUI.

  Read the article

• Unable to load Windows after using EasyBCD to Reset bcd [duplicate]

  - by johnny

  This question already has an answer here: How can I repair the Windows 8 EFI Bootloader? 9 answers My windows installation was working perfectly fine until i clicked "Reset BCD" in EasyBCD in Windows 8. After clicking that EasyBCD told me to add Win 8 entry via Add Entry Menu so i did. After restart, win 8 would not start. Neither would recovery F11. Attempts i made to Restore : Ran boot-repair from ubuntu live cd several time. Used Win8 system recovery disc created via virtualbox with win 8 preview iso. Automated repair from Win8 system recovery disc Ran following commands from cmd started from Win8 system recovery disc bootrec /fixmbr Result : Success message bootrec /rebuildbcd Result : after hitting (Y) "The requested system device cannot be found" System refresh started from Win8 system recovery disc gives error that device is locked. System reset started from Win8 system recovery disc gives error that required partition or device is missing or not accessible. Used automated repair from EasyRE disc. It gave success message. Used Fix boot problem from Macrium reflect winPE repair disc. Copied Recovery partition to usb. Booting from usb gave this error Your PC needs to be repaired. Error Code : 0XC000000f Press Enter to try again Press F8 for Startup Settings F8 & Enter does nothing I cannot install WIn7 or Win 8, error it gives : "windows cannot be installed on this disk. The selected disk is of the GPT partition style."

  Read the article

• Computer freezing while watching Flash videos from net

  - by t3st

  I have a Windows 7 home basic, while watching videos from net (within 5 minutes) computer starts to freeze and shows 100 percent CPU usage. I first thought it's a browser issue but watching videos from different browsers also has the same issue. My system runs the latest Firefox browser and all my plugins (including Flash) is up-to-date. After this when I shutdown/restart the computer it will go to the login window with out any problem. From there when I tried to log in to any account, the system starts to freeze and again I have to start and run Windows in safe mode (which doesn't show any problem). I read it in an article to do these steps CMD->sfc/scannow chkdsk after that only my system works normally, even now I can't watch any videos on the net otherwise it starts freezing( I can watch downloaded videos in computer without a problem) and have to do the whole process once more (which takes a lot of time). while running sfc/scannow its showed results that some of the files are corrupted and it could not be repaired. Can this be the cause for freezing of my computer while running Flash videos? or is it a hardware related problem? What different steps do I have to take to correct those corrupt files? System restore works only some times.

  Read the article

• What is the reason for this DNSSEC validation failure of dnsviz.net?

  - by grifferz

  On trying to resolve dnsviz.net from a host using an Unbound resolver that is configured to use DNSSEC validation, the result is "no servers could be reached": $ dig -t soa dnsviz.net ; <<>> DiG 9.6-ESV-R4 <<>> -t soa dnsviz.net ;; global options: +cmd ;; connection timed out; no servers could be reached Nothing is logged by Unbound to suggest why this is the case. Here is the /etc/unbound/unbound.conf: server: verbosity: 1 interface: 192.168.0.8 interface: 127.0.0.1 interface: ::0 access-control: 0.0.0.0/0 refuse access-control: ::0/0 refuse access-control: 127.0.0.0/8 allow_snoop access-control: 192.168.0.0/16 allow_snoop chroot: "" auto-trust-anchor-file: "/etc/unbound/root.key" val-log-level: 2 python: remote-control: control-enable: yes If I add: module-config: "iterator" (thus disabling DNSSEC validation) then I am able to resolve this host normally. The domain and its DNSSEC check out fine according to http://dnscheck.iis.se/ so there must be something wrong with my resolver configuration. What is it and how do I go about debugging that?

  Read the article

• Computing Number of Bits in Public Key

  - by eb80

  I am working with DKIM and trying to compute the public key size of some DKIM signatures. I know from tools that Gmail's is now 2048, but how could I have figured this out myself (i.e., what exact Linux commands and why)? user@host$ dig txt 20120113._domainkey.gmail.com ; <<>> DiG 9.8.3-P1 <<>> txt 20120113._domainkey.gmail.com ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 52228 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;20120113._domainkey.gmail.com. IN TXT ;; ANSWER SECTION: 20120113._domainkey.gmail.com. 300 IN TXT "k=rsa\; p=MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA1Kd87/UeJjenpabgbFwh+eBCsSTrqmwIYYvywlbhbqoo2DymndFkbjOVIPIldNs/m40KF+yzMn1skyoxcTUGCQs8g3FgD2Ap3ZB5DekAo5wMmk4wimDO+U8QzI3SD0" "7y2+07wlNWwIt8svnxgdxGkVbbhzY8i+RQ9DpSVpPbF7ykQxtKXkv/ahW3KjViiAH+ghvvIhkx4xYSIc9oSwVmAl5OctMEeWUwg8Istjqz8BZeTWbf41fbNhte7Y+YqZOwq1Sd0DbvYAD9NOZK9vlfuac0598HY+vtSBczUiKERHv1yRbcaQtZFh5wtiRrN04BLUTD21MycBX5jYchHjPY/wIDAQAB" ;; Query time: 262 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Mon Nov 19 10:52:06 2012 ;; MSG SIZE rcvd: 462

  Read the article

• Auto Launching PHP-FPM

  - by Seth

  My plist file <?xml version='1.0' encoding='UTF-8'?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd" > <plist version='1.0'> <dict> <key>Label</key><string>org.macports.php-fpm</string> <key>ProgramArguments</key> <array> <string>/opt/local/bin/daemondo</string> <string>--label=php-fpm</string> <string>--start-cmd</string> <string>/opt/local/sbin/php-fpm</string> <string>;</string> <string>--pid=fileauto</string> <string>--pidfile</string> <string>/opt/local/var/run/php-fpm/php-fpm.pid</string> </array> <key>Debug</key><false/> <key>Disabled</key><true/> <key>OnDemand</key><false/> </dict> </plist> After rebooting, it's not loading up automatically. I still have to manually start php-fpm. I have tried unloading and adding RunAtLoad etc. with no luck and tried both these launchctl commands. sudo launchctl load -F /Library/LaunchDaemons/org.macports.php-fpm.plist sudo launchctl load -w /Library/LaunchDaemons/org.macports.php-fpm.plist

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >