Search Results

Search found 10161 results on 407 pages for 'dual boot'.

Page 79/407 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• Boots to terminal

  - by Core Xii

  I had a system running 10.04, I think. I upgraded it to 11.04, everything was fine. But then when I upgraded it further to 11.10, the system would only boot to a terminal, no desktop like before. I installed 12.04 on it instead, keeping /home which was on another partition... but it's still booting to terminal. I believe there may be some bad configuration files left over that are causing this. Looking at other similar issues, I looked for /etc/X11/xorg.conf but it doesn't exist. startx says it isn't installed. Installing nvidia-current didn't help (has GF 6600 GT video card). Alt+F7 shows a blank screen. I used the alternate installer, and didn't select any of the optional packages it prompts during installation. Should I have? How do I get it to boot to desktop like normal?

  Read the article

• Ubiquity is not recognizing existing partition while trying to install Ubuntu alongside Windows 7

  - by Bertner

  So I'm using Ubuntu live CD to install Ubuntu next to Windows 7 but it doesn't recognize partitions. Here is sudo fdisk -l: Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0c7a859b Device Boot Start End Blocks Id System /dev/sda1 63 1250259631 625129784+ f W95 Ext'd (LBA) Partition 1 does not start on physical sector boundary. /dev/sda2 * 81920 4177919 2048000 b W95 FAT32 /dev/sda3 4177920 147535871 71678976 7 HPFS/NTFS/exFAT /dev/sda5 147538608 1147859631 500160512 7 HPFS/NTFS/exFAT I have one partition with Windows 7, one with its created partition (OS) and one for data.

  Read the article

• kubuntu 12.04 won't start

  - by daker

  I have dual boot config with kubuntu 12.04 and Windows7. My problem started this morning when I tried to boot kubuntu. Everything worked fine a couple of days ago and I have not done any mayor system configurations since then. Choosing kubuntu options from grub gives me this screen A couple of minutes later this screen is shown And then it gets stuck. Have been waiting for ~5mins without anything happening. I have tried running fsck from recovery menu without any errors. I have also tried booting in failsafex mode which gives me "Fatal server error: no screens found". apt-get update gives me "Duplicate sources.list entry". I have also tried fixing broken packages from recovery menu. What should I do next?

  Read the article

• Use old raid drive as boot device without data loss

  - by Gabriel

  There were two disks in sw-raid. There were /dev/md1 as swap, /dev/md2 as boot and a /dev/md3 with ext4. The sw-raid was disabled by stopping and removing mdadm and then zeroing the superblock on each /dev/mdX partition with: sudo mdadm --zero-superblock /dev/sda1 sudo mdadm --zero-superblock /dev/sda2 sudo mdadm --zero-superblock /dev/sda3 In the disk that is the first boot device, I don't know if it's relevant, the system type of each partition was set back from fd to 82 or 83 with fdisk, /etc/fstab was updated, changing /dev/mdX to /dev/sdaX, and grub was reinstalled on the boot partition (/dev/sda2) with grub-instal. But the system wont boot. What else should I do to use this disk as the boot device without reinstall or data loss? Current output of fdisk Device Boot Start End Blocks Id System /dev/sda1 2048 33556480 16777216+ 82 Linux swap / Solaris /dev/sda2 * 33558528 34607104 524288+ 83 Linux /dev/sda3 34609152 3907027120 1936208984+ 83 Linux With it doesn't boot I mean that it stops in the grub console (with the grub> symbol). A ls command says: (hd0) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1) (hd1) (hd1,msdos1) It's weird because hd1 was formatted with ext4...

  Read the article

• Machine check error while booting from USB

  - by javanna

  I put the last Ubuntu iso on my USB stick using UNetBootin, after formatting it to fat32. I've already done that before with other operating systems and it worked. I can't actually boot Ubuntu from USB since I get a black screen with the error "Machine check error" on top the an automatic reboot happens. The error appears right after the boot, I can't see anything else before. I'm using my ASUS K53SV latop. Does anybody know how to solve this?

  Read the article

• Could not write bytes: broken pipe - looking for log of removed packages

  - by user288987

  I have a dual boot system with 12.04 and windows 7. Ubuntu worked fine yesterday but this morning upon boot I get subject. Searched the forums and unsuccessful with recovery. I tried sudo gedit /var/log/apt/history.log to see the log of removed packages, but get the following... ** (gedit:976): WARNING **: Command line 'dbus-launch --autolaunch=2d7d18532e9953bc8a2b852e00000007 --binary-syntax --close-stderr' exited with non-zero exit status 1: Autolaunch error: X11 initialization failed.\n Cannot open display: Run 'gedit --help' to see a full list of available command line options. Anyone have any suggestions for a fix? Please let me know if you require any additional information. Thanks! Mark

  Read the article

• Computer won't wake from hibernate

  - by Icoo

  So I have a pretty dumb problem...I accidentaly pressed Hibernate while trying to Restart...since then my computer wont boot into Ubuntu anymore (through normal mode or single user mode - rescue mode that is)...all I get is: mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys/ on root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or dirctory Target filesystem doesn't have requested /sbin/init. No init found. Try passing init= boot arg. BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Obviously I tried to fire up the Live CD and run fsck (or e2fsck) from there (or just try to do a Check of /dev/sdb1 my partition via gparted - which is basically the same thing). But it doesn't allow me...both gparted and fsck say that the device is busy (I can't even mount it in the LiveCD to rescue data)...umount /dev/sdb1 says its not mounted...any ideas?

  Read the article

• Failed GRUB after 10.04 to 12.04 upgrade in system with LVM

  - by Vagelis L

  I am using Ubuntu Server as a SMB server at work and two days ago I have tried to upgrade it to 12.04. After reboot, I got this grub_xput missing grub rescue> and all attempts to start from this prompt failed (missing components, although grub directory is normally set as prefix). My system sits and boots on an LVM (soft raid-5). I have read almost all posts in many forums, tried grub rescue, boot-repair, ubuntu-secure-remix with boot-repair but without positive result. This is the log of my last (and best so far) attempt to fix this system. Any suggestions? Please help.

  Read the article

• Windows 7 and 11.10 side by side from scratch what am I doing wrong?

  - by Bill.Caffery

  I have tried everything I can think of at this point and I'm at a total loss. I have a 2TB drive I want to install Windows 7 and 11.10 (both are 64 bit) side by side, but once I install Windows it must need gpt to work or something because no matter how many times I've removed it, it always returns. If I use gdisk and set the disk as mbr, Windows won't load. Now this last time I ran gdisk and tried to boot into Windows before I installed Ubuntu all the way and ended up at a grub rescue prompt. Any help please? Also let me say I have been searching and reading for days and have tried everything I can find to make this work so this isn't a one time event, it's continual.

  Read the article

• Help with Grub2 needed post 13.10 updgrade. Grub sees my opensuse12.3 but when selected hangs with black screen.

  - by sean farley

  This happened on last upgrade and I reinstalled opensuse. I want to avoid that this time. When opensuse controlled grub the options to boot either OS worked fine. The ubuntu one will not work. Are there grub settings I can change to get this working? Would it be better to get the opensuse grub to load, if so how can I do this. i can see the opensuse root and home directories from ubuntu (they are on a separate HDD) Thanks

  Read the article

• Booting but not rebooting from external USB hard drive, what could be the problem?

  - by user8276

  I have a Dell Inspiron 6400 laptop with a dead internal hard drive controller. It boots perfectly from CD or USB. I therefore removed the internal hard drive and installed Ubuntu 10.10 Maverick onto an external USB hard drive. It boots and runs perfectly when doing a "cold start" of the PC. However, when I choose restart/reboot in the Ubuntu menu (e.g. after an update), I get this error message from the BIOS: "No bootable devices, strike f1 to retry boot, f2 for setup utility, press f5 to run onboard diagnostics". I can make the system boot again by pressing f2 or f5 and exiting the utility without having done anything. Or, I can simply power off the system and do a new "cold start". Does anyone know the likely reason for this problem and how to fix it. It is not a big issue but an annoyance that I would like to fix if possible.

  Read the article

• Ubuntu 10.10 booting but not rebooting from external USB hard drive, what could be the problem?

  - by user8276

  I have a Dell Inspiron 6400 laptop with a dead internal hard drive controller. It boots perfectly from CD or USB. I therefore removed the internal hard drive and installed Ubuntu 10.10 Maverick onto an external USB hard drive. It boots and runs perfectly when doing a "cold start" of the PC. However, when I choose restart/reboot in the Ubuntu menu (e.g. after an update), I get this error message from the BIOS: "No bootable devices, strike f1 to retry boot, f2 for setup utility, press f5 to run onboard diagnostics". I can make the system boot again by pressing f2 or f5 and exiting the utility without having done anything. Or, I can simply power off the system and do a new "cold start". Does anyone know the likely reason for this problem and how to fix it. It is not a big issue but an annoyance that I would like to fix if possible.

  Read the article

• Ubuntu 12.04 wireless does not detect networks

  - by dudeitsdevin90

  I installed Ubuntu on a partition of my MacBook Pro. Wireless connections work fine when I switch to OSX, but the wireless networks are not even detected when I boot Ubuntu. I installed Wicd as a new network manager, but I'm still having the same problem. Ubuntu works on a wired connection though. I have searched the web for a solution... similar questions have been asked but I have not been able to find a way to fix this problem. Any help would be greatly appreciated.

  Read the article

• How do you hibernate/suspend Ubuntu like Windows or both at the same time?

  - by All Star Geek

  I'm using an ASUS laptop with Windows 7, and I just installed Ubuntu alongside Windows yesterday, using the no-risk option. I noticed, though, that I can't hibernate Ubuntu the way I did with Windows to save time, and, every time I use Ubuntu, I have to shut down to go into Windows, which has a slow boot. Is there any way that I could have Windows and Ubuntu hibernated at the same time so I can access both easily (preferably without having to hit a function key within seconds). When I try to hibernate or suspend Ubuntu with Windows shut down, the screen just turns blue and doesn't shut the computer off like a Windows hibernate or sleep.

  Read the article

• Install ubuntu using GRUB2

  - by FELDAP1

  I have Deepin linux installed and now I need to install ubuntu. I don't have CD ROM , so I thought I can use GRUB2 ISO boot option. I have used the link Install Ubuntu from iso file using grub2 to boot ISO using GRUB2. I need to install the operating system. When I click Install Ubuntu icon in desktop, the installer starts. But I can't see the option where we can specify the partition. It just directly goes to installing. Even if I click install, the installer does nothing and the installation didn't start. What to do? Any ideas?

  Read the article

• Can't install Ubuntu 13.04

  - by Beaker1210

  I am trying to install Ubuntu 13.04 on a Dell Mini 10 that is currently running Qimo. I want to replace the old operating system entirely. When I turn on the computer and boot from the USB stick it brings up a black screen that says: Boot: I have no idea where to go from here. I created the bootable USB stick using Universal USB installer. I've used the same process for installing Ubuntu on other machines in the past have never had this issue. Thanks in advance for the help. :)

  Read the article

• "BAD idea" warning when trying to recover Grub, after Windows removed it

  - by Shazzner

  Tried sudo grub-install on sda1 but it complained about being a BAD IDEA. I had to install windows for a work related issue so I used a separate disk (I had used it for ubuntu on this computer, but bought a bigger disk so installed ubuntu on that and left the old one in in case I needed an old file). Windows installed fine but overwrote Grub. So if I choose the Ubuntu disk to boot first in BIOS I get a blank screen. I googled and followed this advice: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows However, when I get down to this section: sudo grub-install --root-directory=/media/0d104aff-ec8c-44c8-b811-92b993823444 /dev/sda1 I get this: Attempting to install GRUB to a partition instead of the MBR. This is a BAD idea… --recheck does nothing. Any ideas?

  Read the article

• installed 12.04 fine. updated graphics driver. now solid puprle screen.

  - by Zephium

  Purchased a new msi ge 70 series labtop. nvidia card gtx 765m. updated driver after install, and ran update manager. All seems well. restarted as required. Now i have a solid purple screen, even if i use boot menu to recovery mode. all i can do is access grub menu 3.10. live cd will run but i get purple screen and cant see choices. please help and im still learning ubuntu. noob talk prefered. i hate making more mistakes. Thanks also tryed changing lines of kernal code using "e" on boot menu, nomodeset and the like. not helping. any way to fix problem through grub?

  Read the article

• Distro that I can load into RAM?

  - by NullUserException

  Is there a modified version of Ubuntu that I can choose to load to RAM on start up? Kinda like the LiveCD, but that can be easily modified (ie: I can install stuff) when I choose to boot from disk. The idea is to install it to a USB drive. I know there's something similar but slax is lacking in many departments. A "full" version Ubuntu would be better. A LiveUSB installation seems to be pretty close to what I want, but apparently I have to choose whether or not it will be persistent by the time I install it. I want to be able to choose that every time I boot.

  Read the article

• Installing ubuntu 12.04 LTS alongwith windows xp in two different HDDs

  - by chachu

  I have two HDDs. First HDD has four partitions with Windows XP in the first partition Second has two partitions and 15GB unallocated space. I tried to install Ubuntu 12.04 LTS in the second HDD by using Unallocated space. I tried for 6 times. Each time it got installed, but after first restart, it directly boots Windows XP in the first HDD and no boot options appear. Every time I found that the Ubuntu installation used unallocated space and made two partitions one EXT3 and other Linux swap. I don't know what went wrong. During Installation, Ubuntu detected Windows XP. Can anybody help me?

  Read the article

• How can I install Ubuntu alongside Fedora?

  - by user285248

  I am currently running Fedora and would like to duel boot with Ubuntu. I do not want to replace Fedora, I would like to keep it as my main OS. However, when using the Ubuntu installer I only get the option to either: "Replace Fedora release 20 (Heisenbug) with Ubuntu" or "Something else" Is there I way I can install ubuntu alongside Fedora without deleting it? If so, as I would like fedora to be my main OS, is there also a way to make it the top grub option? I have tried partitioning with gparted however I can't split the fedora partition, it says it is all used however I have only used about 100/500GB. I am trying to install ubuntu 13.10 off a live USB stick, I will upgrade to 14.04 when I install it but don't want to make a new live USB.

  Read the article

• Cannot Start My System

  - by KrishArora

  I have installed Ubuntu Studio 13.10 installed on my system. Today I have rebooted it and now it is not starting or booting again, the logo is seen and there appears an error message that says :- [23.755113] systemd-udevd[329]: inotify_add_watch(6, /dev/sdb, 10) failed. No such file or directory After this message the system doesn't start. I have done a boot repair through live CD, but that also doesn't helps me. Here is the link of the boot repair process. Please help me how to restore my system without loosing my data

  Read the article

• Binfmt config not persisting after booting

  - by Ishpeck

  I have the binfmt kernel module set up so I can run .NET apps as if they were native binaries. I have the /etc/rc.local file configured identically to this. If I power down my computer or boot into Windows, when I come back to Ubuntu, I can't run .NET apps without calling Mono. However, if I simply touch /etc/rc.local and restart, the binfmt configuration appears to kick in and I can run my .NET EXE's as I expect to. How do I get my configuration to stick?

  Read the article

• Encrypted usb stick not booting anymore how can I resolve the Disaster

  - by statquant

  Guys I am experiencing massive problem here. I created a bootable usb stick that I "full disk" encrypted with Ubuntu 13.04. I was using it when it froze. I had to reboot it manually and now I cannot boot on it anymore (It is not listed in the boot menu anymore) If I put when I run Ubuntu on my laptop ubuntu can see it and I am asked for a password But the correct password does not seem to work (I assume that this passphrase is the one I was using previously at startup) Can you please help me figure this thing out, this is massive problem to me...

  Read the article

• Ubuntu installed accidently on windows

  - by Maz

  I'm new here and would very much appreciate your help I was making a bootable USB to rescue a crashed Ubuntu notebook. I was doing this on my Sony VIo laptop, now I can't access my Sony files, when I boot the Sony up it boots in Ubuntu I think I have overwritten the windows boot sector with Ubuntu I need to either undo the process or if this is not possible then at least recover my kids childhood memory photos Any help to resolve this issue would be very much appreciated P.s I have since removed the hardrive from the Sony and tried to read it on a windows machine as an external drive, windows can see the drive but with no data!

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >