Search Results

Search found 29426 results on 1178 pages for 'user99572 is fine'.

Page 79/1178 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

  • How to get "Fn" keys to work (Asus 4830T)? (specificly, the "suspend" key)

    - by Pointy
    I've got an Asus 4830T onto which I've just re-installed 12.04 because I installed an SSD. I was running 12.04 before too, which had been upgraded over a few releases. At some point on that old install, I had gotten all the "Fn" keys to work, or at least all the ones I cared about. (Oh except I think the screen brightness keys never worked.) I have no recollection of what I did. Anyway now things are fine, and some of the Fn keys work: the one to turn of the trackpad and the one to turn off wireless (grr I hate that one). However, the "suspend" key for some reason does not work. Now the system will suspend and resume just fine, but I'm having to do it from the menu. Is there an easy (or hard) way to make those work? I'm running straight Ubuntu but with Xfce installed as my normal desktop. (In other words, it's not Xubuntu, though I doubt it matters.) I recall at some point having found some arcane mapping mechanism to bind the Fn keys to actions, but I can't find it now. (I'm perfectly OK with editing weird files; I'm a long-time Unix user.) (Very long-time.)

    Read the article

  • Can too many 301 redirects cause a DNS error?

    - by Graham
    For a site http://imageocd.com that I just set up I initially spelled the category "automobiles" as "autimobiles"... I know it's rediculous. I then set up over 10,000 pages behind that category e.g. http://imageocd.com/automobiles/hillman-minx-cabrio-pictures-and-wallpapers. So, I set up over 10,000 301 url redirects to change the spelling on automobiles. I just checked my Google Webmasters report and got an error saying: http://www.imageocd.com/: Googlebot can't access your siteSep 7, 2012 Over the last 24 hours, Googlebot encountered 2 errors while attempting to retrieve DNS information for your site. The overall error rate for DNS queries for your site is 66.7%. Could the overabundance of 301 redirects be causing this? I host 13 sites on this dedicated server and all sites are running fine. I also contacted GoDaddy and they said the server is running fine. Any ideas on what might be going on? Also, I have "canonical" set up for every URL. Could this be part of the error? Thanks.

    Read the article

  • GTK app: How do I create a working indicator with Qt/C++?

    - by hakermania
    I've tried in 2 forums, but I had no luck so far. So, I am using Qt IDE in order to build my application so as to participate to the Ubuntu Showdown contest. In my application, I've done the following: void show_app(MainWindow *data) { //this works fine: app_indicator_set_status(appindicator, APP_INDICATOR_STATUS_PASSIVE); //this crashes the application: data->show(); } void MainWindow::make_indicator() { if(appindicator){ //appindicator has already been created return; } appindicator = app_indicator_new("Format Junkie Indicator", "formatjunkie", APP_INDICATOR_CATEGORY_APPLICATION_STATUS); GtkWidget* showapp_option; GtkWidget* indicatormenu = gtk_menu_new(); GtkWidget* item = gtk_menu_item_new_with_label("Format Junkie main menu"); gtk_menu_item_set_submenu(GTK_MENU_ITEM(item), indicatormenu); showapp_option = gtk_menu_item_new_with_label("Show App!"); g_signal_connect(showapp_option, "activate", G_CALLBACK(show_app), this); gtk_menu_shell_append(GTK_MENU_SHELL(indicatormenu), showapp_option); gtk_widget_show_all(indicatormenu); app_indicator_set_status(appindicator, APP_INDICATOR_STATUS_ACTIVE); app_indicator_set_attention_icon(appindicator, "dialog-warning"); app_indicator_set_menu(appindicator, GTK_MENU (indicatormenu)); } So, basically I am trying to make a simple indicator entry, which, on click, it will hide the indicator and display the application. The indicator can be successfully hidden using the PASSIVE thingy over there, but, during the call data-show();, the application crashes. Any help on what I am doing wrong would be appreciated! Also, please help me to correct this problem I'm facing (alternatively, I will migrate to the old and good tray icon (it works fine in 12.04, anyway) which I can handle very easily and efficiently)

    Read the article

  • Dim (NEARLY blank) laptop screen, secondary screen works - why?

    - by LIttle Ancient Forest Kami
    My laptop screen is (almost) black while my secondary screen is fine. I believe it to be backlight / brightness related. Problem description it starts when I start the laptop system loads and works fine, just screen has problems I can see the screen though very faintly / dimly - it's hard to see anything which ain't very white e.g. starting screen has big Thinkpad logo in white, large font - I can see it, though very dimly second screen works very well Official backligtht debugging: using acpi setting as prescribed there for Thinkpads didn't help I can see an entry in /sys/class/backlight/ and it changes when I press hotkeys for brightness (current backlight power for instance goes up or down) acpi-off didn't helpm neither did acpi_backlight=vendor Hardware data Laptop is Thinkpad Edge with glossy screen. 4 processors, 2 cores, exemplary CPU data from cat /proc/cpuinfo reports Genuine Intel i5 (M 480 @ 2.67GHz). OS is Ubuntu Lucid, 10.04 LTS, 64-bit, with Linux generic kernel (2.6.32-44) and GNOME 2.32.2 (though I doubt there lies the problem). $ lspci | grep VGA 01:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series] $ lshw -C display *-display description: VGA compatible controller product: M92 [Mobility Radeon HD 4500 Series] vendor: ATI Technologies Inc physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:33 memory:c0000000-dfffffff(prefetchable) ioport:2000(size=256) memory:f0300000-f030ffff memory:f0320000-f033ffff(prefetchable) Driver I was NOT running any proprietary drivers, just checked with "Hardware drivers". There is one for ATI that is suggested there, though I didn't need it so far. UPDATE: changing the driver to proprietary one (ATI/AMD FGLRX) didn't help. Tried and failed Resetting / running on power or battery / charging / getting rid of static electricity / warming up *doesn't help* This is NOT a blank-screen problem, at least it isn't following official Ubuntu black-screen diagnostics - I can see my screen, though barely. What I will try next: - check last updates I've made - IIRC I am running on nomodeset already, but will verify this Any ideas how to proceed best? What is most probable cause?

    Read the article

  • Graphical glitches on grub and ubuntu desktop

    - by Klyn
    I've decided to install ubuntu but neither ubuntu or any other linux distro won't even get to the desktop screen or work after getting there. On windows 8, everything is just fine. my new video card works perfectly and I have no problem with anything about it. then when I try to boot from ubuntu with wubi or with usb everything goes like this: 1) Grub screen...no problem at all, colors are just fine everything looks okay 2) and then linux boot screen...weird background color, over the backround there are vertical stripes of red-orange dots. but on the ubuntu logo and text, there are no dots at all! -I mean its shape is perfect- 3) desktop is about the start but * vertical stripes of red colored dots are all over the unity screen*. then when I click on ubuntu's menu, it usually switches to black screen saying something about "panic occured"...and then it restarts or it gives no respond at all. problems started after putting hd 6570 video card on my asus m5a78lm-lx video card which has amd phenom II X4 processor on it. I've searched to find something but there was no similar question that's why I'm almost sure it is kind of unique. again, I'm writing on Windows 8 right now and everything works and looks perfect. so far I've updated bios and anyone knows anything to solve this?

    Read the article

  • ubuntu 12.10 Lenovo b570e, WiFi connected but not working

    - by koogee
    I'm running ubuntu 12.10 liveUSB on a lenovo b570e. It has an atheros wifi card that connects with my home network but I can't browse AT ALL. My network is multiple clients --> router --> isp modem --> Internet I can ping my router (192.168.0.1) but not my isp's modem(192.168.15.1). I have 3 other computers connected to the same router that are working fine (infact i'm posting from one) ping -c 3 google.com unknown host google.com ping -c 3 8.8.8.8 shows 100% packet loss I think its some networking issue. I tried directly connecting it to the router via ethernet cable but same issue. It gets an ip, shows LAN connected but can't browse. If I connect it directly to the isp modem via ethernet cable it starts working fine. Connection Information shows: Interface: 802.11 wifi (wlan0) driver: ath9k security: wpa/wpa2 speed: 150mb/s ip: 192.168.0.106 broadcast: 192.168.0.255 subnet:255.255.255.0 default route: 192.168.0.1 primary dns: 192.168.15.1 i have restarted the router and modem many times. Rebooted the LiveUSB many times.

    Read the article

  • Graphics hardware warning when updating to 14.04

    - by pacomet
    As I use Ubuntu at work I just update only LTS versions but now I'm not sure if I can/should. As my computer is now ten years old I would change if was mine but as it is owned by my employer I have to work with it. It's not a bad one, it runs fine (this was not true when still had Windows on it ;-). When updating to 14.04, it warns about possible bad/slow performance with Unity 3D so I stop updating as I am at work, not my own computer. As I understand from http://askubuntu.com/a/438958/25305 Nvidia Geforce FX 5500 graphics card is still supported in 14.04. Now, in 12.04, I have driver version 173 and unity 2d runs fine for me. output of /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce FX 5500/AGP/SSE2 OpenGL version string: 2.1.2 NVIDIA 173.14.39 Not software rendered: yes Not blacklisted: no GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no Should I update? Is it better to stay with 12.04? Thanks

    Read the article

  • Ubuntu Server 12.04, NAT, Router, DNS. It just doesnt work

    - by Bjørnar Kibsgaard
    I recently inherited some server hardware from work and decided that it could be my main router at home (among other things). Ubuntu 12.04 server installation harware wise goes well and everything is found and working when I boot up. So I begin with setting up eth1 with DHCP. This works fine and it gets a public IP address from my modem and we have a working internet connection. Then I set up my other NIC (eth0) as static (192.168.0.1) and this also works fine. I can access it from other computers in the network. The problems are coming when I am trying to set up a DHCP server with isc-dhcp-server. It seems like it is working and giving the computers IP adresses but after one reboot it stops working. After the reboot eth1 will get a public ip from the modem but it doesnt have internet access. I have to manually run dhcpcd eth1 to get it to work again. As far as I know I havent made any changes to DNS. What am I doing wrong? I have never really had problems with this before. :)

    Read the article

  • "Misaligned partition" - Should I do repartition (how?)

    - by RndmUbuntuAmateur
    Tried to install Ubuntu 12.04 from USB-stick alongside the existing Win7 OS 64bit, and now I'm not sure if install was completely successful: Disk Utility tool claims that the Extended partition (which contains Ubuntu partition and Swap) is "misaligned" and recommends repartition. What should I do, and if should I do this repartition, how to do it (especially if I would like not to lose the data on Win7 partition)? Background info: A considerably new Thinkpad laptop (UEFI BIOS, if that matters). Before install there were already a "SYSTEM_DRV" partition, the main Windows partition and a Lenovo recovery partition (all NTFS). Now the table looks like this: SYSTEM_DRV (sda1), Windows (sda2), Extended (sda4) (which contains Linux (sda5; ext4) and Swap (sda6)) and Recovery (sda3). Disk Utility Tool gives a message as follows when I select Ext: "The partition is misaligned by 1024 bytes. This may result in very poor performance. Repartitioning is suggested." There were couple of problems during the install, which I describe below, in the case they happen to be relevant. Installer claimed that it recognized existing OS'es fine, so I checked the corresponding option during the install. Next, when it asked me how to allocate the disk space, the first weird thing happened: the installer give me a graphical "slide" allocate disk space for pre-existing Win7 OS and new Ubuntu... but it did not inform me which partition would be for Ubuntu and which for Windows. ..well, I decided to go with the setting installer proposed. (not sure if this is relevant, but I guess I'd better mention it anyway - the previous partition tools have been more self-explanatory...) After the install (which reported no errors), GRUB/Ubuntu refused to boot. Luckily this problem was quite straightforwardly resolved with live-Ubuntu-USB and Boot-Repair ("Recommended repair" worked just fine). After all this hassle I decided to check the partition table "just to be sure"- and the disk utility gives the warning message I described.

    Read the article

  • Ubuntu server is dropping SSH connections, then not allowing me to log back on

    - by wilhil
    I have an ESX box which I have loaded with two Ubuntu Server machines. During setup, I chose no additional packages to install as I just wanted a lightweight machine for testing. The first thing I did was change the root password via sudo passwd After ESX got on my nerves through lag, I decided to install OpenSSH via apt-get install openssh-server. It did it's business, and I then opened putty and could connect in to both machines fine. The first time it connected, it asked me to add the ssh key as obviously it did not know it. Anyway, the second server is working flawlessly, but, the first seems to be giving me trouble. I was in the middle of typing a sentence when it kicked me off for no reason and when I tried to reconnect, putty gave me a warning that the ssh key had changed and it is potentially dangerous. I attempted to log in anyway and it did not work, just the standard access denied message. Using the second machine, I SSHed in to the first machine and it worked straight away, I then killed the SSH sessions (and possibly SSH server), I then reconnected via putty and I again received the security warning message, but, it allowed me to log on fine. ... I thought "glitch" and nothing more of it, but, it just happened again! I really do not understand this and was hoping someone here can help?

    Read the article

  • Ubuntu live cd : black screen and blinking cursor

    - by IFasel
    I try to install ubuntu 12.04 on my computer. I can get to the purple screen on the live cd but then, if I choose "Installing Ubuntu", I have a black screen with a cursor blinking (and nothing else happens). My PC : acer aspire M3920, CPU i5-2300, 8 Gb RAM, NVIDIA gt 405. What I already tried : I tried with 12.04 and 13.04 daily build I tried with a live usb and with a live dvd I tried the following boot options : nomodset, acpi=off I googled a lot and it seems that it could be a graphic card problem. Do you know any other boot options that I could try ? UPDATE This is not a duplicate : I've tried all the common boot options (nomodeset, noacpi...) and it doesn't change anything. With the option "no splash" (instead of "quiet splash"), I can see what happens before the forever-blinking cursor : [sdg] no caching mode present [sdg] assuming drive cache : write trough ata8.00: excetion Emask 0x52 ... frozen ata8 : SError : { RecovData RecovComm UnrecovData...} ata8.00 : failed command : IDENTIFY PACKET DEVICE ... ata8.00 : status : { DRDY } ata8 : hard resetting link Does somebody know what it means ? N.B. astonishingly, Puppy Linux boots fine (but Debian, Fedora and Ubuntu do not) Solution In fact, it was not a graphic card problem. I had to disconnect the dvd drive and connect it to another free sata connector (I don't really understand why Ubuntu had trouble with this connector and Windows 7 not). After that, everything worked fine.

    Read the article

  • Rotate a vector

    - by marc wellman
    I want my first-person camera to smoothly change its viewing direction from direction d1 to direction d2. The latter direction is indicated by a target position t2. So far I have implemented a rotation that works fine but the speed of the rotation slows down the closer the current direction gets to the desired one. This is what I want to avoid. Here are the two very simple methods I have written so far: // this method initiates the direction change and sets the parameter public void LookAt(Vector3 target) { _desiredDirection = target - _cameraPosition; _desiredDirection.Normalize(); _rotation = new Matrix(); _rotationAxis = Vector3.Cross(Direction, _desiredDirection); _isLooking = true; } // this method gets execute by the Update()-method if _isLooking flag is up. private void _lookingAt() { dist = Vector3.Distance(Direction, _desiredDirection); // check whether the current direction has reached the desired one. if (dist >= 0.00001f) { _rotationAxis = Vector3.Cross(Direction, _desiredDirection); _rotation = Matrix.CreateFromAxisAngle(_rotationAxis, MathHelper.ToRadians(1)); Direction = Vector3.TransformNormal(Direction, _rotation); } else { _onDirectionReached(); _isLooking = false; } } Again, rotation works fine; camera reaches its desired direction. But the speed is not equal over the course of movement - it slows down. How to achieve a rotation with constant speed ?

    Read the article

  • After reboot allocated node gets commissioned again

    - by cloudfan
    i had set up a maas with juju and deployed Openstack into it for testing. During my vacation i shut down all computers. Afterwards i started at first the maas server, then the node where juju was bootstrapped and juju-gui was deployed to. Sadly the node got commissioned again and so all my deployments are gone. I decomissioned the according node from the maas and bootstrapped it again. Afterwards i tested again juju bootstrapping the node, shutting down both nodes and starting them in the same order again. The Juju node gets commisioned again. After bootstrapping everything looked fine in the MAAS GUI (node was set to allocated to root, which was also the case after the restart) and also the JUJU GUI was available and juju status worked fine. Before my vacation i also had some other nodes deployed through juju. They all seem to be still available and have not been commisioned again. Do you have any ideas what might have happened? Is there any issue with a bootstrapped juju node and the commisioning? Any help or hints on what i could check are appreciated! Thank in advance for your help!

    Read the article

  • Translating an object along its heading

    - by Kuros
    I am working on a simulation that requires me to have several objects moving around in 3D space (text output of their current position on the grid and heading is fine, I do not need graphics), and I am having some trouble getting objects to move along their relative headings. I have a basic understanding of vectors and matrices. I am using a vector to represent their position, and I am also using Euler Angles. I can translate one of my entities with a matrix along whatever axis, and I can alter their heading. For example, if I have an entity at (order is XYZ) 1, 1, 1, with a heading of 0, I can apply a translation matrix to get them to talk to 1, 1, 2 fine. However, if I change their heading to 270, they still walk to 1, 1, 3, instead of 2, 1, 2 as I desire. I have a feeling that my problem lies in not translating my matrix from world space to object space, but I am not sure how to go about that. How can I do this? Addition: I am using 3D vectors to represent their current position and their heading (using the three euler angles). For now, all I want to do is have an entity walk in a square, reporting their current position at each step. So, assuming it starts at 10, 10, 10 I want it to walk as follows: 10,10,10 -> 10, 10, 15 10, 10, 15 -> 5, 10, 15 5, 10, 15 -> 5, 10, 10 5, 10, 10 -> 10, 10, 10 My 1 Z unit translation matrix is as follows: [1 0 0 0] [0 1 0 0] [0 0 1 1] [0 0 0 1] My rotation matrix is as follows: [0 0 1 0] [0 1 0 0] [-1 0 0 0] [0 0 0 1]

    Read the article

  • Can't Log Into Ubuntu 12.04

    - by Razick
    Yesterday, after turning on Ubuntu, I logged into a Gnome session. A few minutes later, I tried switching to Unity for a change. Unfortunately, the background and my desktop icons loaded, but the system bar and launcher failed to load even after several minutes. Unity had always worked fine for me. I then tried the guest account, and it worked fine on both Unity and Gnome. However, the problem with my account got worse; I couldn't log into any desktop at all anymore. I would type in my password and press enter and it would just sit there doing nothing. The computer no longer responded in any way, so I had to hold the power button and reboot. The same problem happened repeatedly. Earlier today, I tried to get on again. I found that I hadthe same problem, when I tried to log in, the computer no longer locked up, but instead flashed a black screen with theconsole output and what seemed to be an error message before returning to the log in screen. It was to quick for me to read, about 1/4-1/2 second. I'd really appreciate some help as I have some important files that are not backed up yet. I can't transfer the files to a new account, or even make a new account because I tried taking the password off my account so now I can't authenticate from the guest to perform root functions. I'd really appreciate some help as I have some important files that are not backed up yet. Thanks.

    Read the article

  • UBUNTU's Network Connection Manger can't detect Huawei ETS2051 Modem device!

    - by Doctoa
    I have a modem device called Huawei ETS2051 and the Network Connection Manger can't detect it, but when I use Gnome-PPP it work fine but the problem is when I use Gnome-PPP; apps like Ubuntu software Center Can't reconice that's Iam connecting to the Internet so the app is just act like it's offline while other apps like web browsers and IM's work good under Gnome-PPP. any way what I want is to have a Full Ubuntu experince by making The Network Connection Manger detect my ETS2051. I have another 3G USB modem and The Network Connection Manger detect it and it's work just fine but the internet price for this one is high and I can't effort it so am count on that ETS2051 modem as you can see for it's low price and stable internet speed that satesfy my needs. More information: Gnome-PPP is a GUI for wvdial. the ETS2051 modem use a serial USB port. I have a Windows driver CD for the device. I have also find This qustion about the software Center acting like it's offline around wvdial and there's this launchpad bug. and am really insest to use Ubuntu Software Center so please no other software manger apps recomendation... I've also this Genius ColorPage HR6X Slim scanner that's Ubuntu can't detect it, so if you interset you can check and answer the qustion from here...

    Read the article

  • Ubuntu 12.10 wont boot

    - by John Mark High
    im new to using Ubuntu and just bought a HP Pavilion g6-2240sa with windows 8 pre installed. I made a bootable USB with Ubuntu on it and installed alsongside windows, for 2 days it worked fine, I got into Ubuntu by doing an advanced restart from windows 8 and then booting Ubuntu from the partition it made. When i did the advanced restart today there was only 1 HDD i could select ( there were 3 before windows, a restore partition that was already there when i got the computer and Ubuntu) so i booted from the USB again and re-installed Ubuntu. then did an advanced restart and the 3 partitions where there again, i booted from Ubuntu and now heres my problem. I get the Ubuntu background when its loading then its just a black screen with some writing, its not on long enough to read, then just a black screen with a white _ and the top left corner that does nothing, i have to restat the computer and it auto boots into windows 8. im a little confused as the first time i installed Ubuntu it worked fine until the partition dissaperd), the second time i installed i did everything the same except it found the old Ubuntu so i reinstalled it and now is donst work.

    Read the article

  • Weird Screen while booting to install, while installing and after the install...and then the "panic occured" error

    - by Klyn
    I've decided to install ubuntu but neither ubuntu or any other linux distro won't even get to the desktop screen or work after getting there. On windows 8, everything is just fine. my new video card works perfectly and I have no problem with anything about it. then when I try to boot from ubuntu with wubi or with usb everything goes like this: 1) Grub screen...no problem at all, colors are just fine everything looks okay 2) and then linux boot screen...weird background color, over the backround there are vertical stripes of red-orange dots. but on the ubuntu logo and text, there are no dots at all! -I mean its shape is perfect- 3) desktop is about the start but * vertical stripes of red colored dots are all over the unity screen*. then when I click on ubuntu's menu, it usually switches to black screen saying something about "panic occured"...and then it restarts or it gives no respond at all. problems started after putting hd 6570 video card on my asus m5a78lm-lx video card which has amd phenom II X4 processor on it. I've searched to find something but there was no similar question that's why I'm almost sure it is kind of unique. again, I'm writing on Windows 8 right now and everything works and looks perfect. so far I've updated bios and anyone knows anything to solve this?

    Read the article

  • X crashes and GNOME loses all its configuration

    - by Oli
    About every 3 days on my desktop (always on), X crashes, gdm restarts and it dumps me at a login screen. When I log in Gnome appears to have lost a lot of its settings: it plays sounds in weird places, UI elements look like they're from the 90s (GTK+ defaults) and it's generally pretty hideous. Note everything works fine. It's not like my profile doesn't exist because I can browse the internet fine (Firefox knows my bookmarks, history, passwords, etc) and my desktop is unscathed (apart from the icon theme). Manually restarting gdm doesn't fix this. I have to do a full reboot. Now I'm almost certain that this is a nvidia issue causing X to baulk (I've seen similarish threads on nvnews) and I'm happy with that (my fault for running their latest drivers all the time). What I'm concerned about is why Gnome looks so fugly. Is there anything I can do to force it to reload its settings without restarting the whole computer. Restarting is an issue for me as I run several daemons that other computers on the network depend upon. This is what I mean by ugly/fugly... Look at that scroll bar!

    Read the article

  • Is IDirectInput8::FindDevice totally broken on Windows 7?

    - by Noora
    I'm developing on Windows 7, and using DirectInput8 for my input needs. I'm tracking gamepad additions and removals (that is, GUID_DEVINTERFACE_HID devices) using the DBT_DEVICEARRIVAL and DBT_DEVICEREMOVECOMPLETE messages, which works fine. However, what I've come to find out is that no matter what I do, passing the received values from DBT_DEVICEARRIVAL to IDirectInput8's FindDevice method, it will always fail to identify the device, returning DIERR_DEVICENOTREG. DirectInput still clearly knows about the device, because I can enumerate and create it just fine. I've tried with three different gamepads, and the error persists, so it's not about that either. I also tried passing some alternative interface GUIDs for the RegisterDeviceNotification call, didn't help. So, has anyone else faced the same problem, and have you found a usable workaround? I'm afraid I'll soon have to stoop down to re-enumerating all devices when something is added or removed, but I'll first give this question one last shot here. EDIT: For the record, I've also tried pretty much every single HID API & SetupAPI function for alternative ways of figuring out the needed GUIDs, with zero success. So if you're facing the same problem as me, don't bother with that route. I'm pretty sure those GUIDs are made up by DirectInput itself somehow. Short of reverse engineering dinput8.dll, I'm truly out of ideas now.

    Read the article

  • Certain grid lines not rendering as expected

    - by row1
    I am drawing a simple quad (a triangle strip with 4 vertices) as the floor and then drawing an 8x8 grid over top (a collection of vertex pairs for a line list). The vertical grid lines work fine (apart from being very aliased), but some of the horizontal lines do not get rendered. The grid renders fine if I do not draw the quad. foreach (EffectPass pass in _Effect.CurrentTechnique.Passes) { pass.Apply(); CurrentGraphicsDevice.SetVertexBuffer(_VertexFloorBuffer); _Engine.CurrentGraphicsDevice.DrawPrimitives(PrimitiveType.TriangleStrip, 0, 2); //Some of the horizontal lines seems to disappear if we draw the above quad. CurrentGraphicsDevice.SetVertexBuffer(_VertexGridBuffer); CurrentGraphicsDevice.DrawPrimitives(PrimitiveType.LineList, 0, _VertexGridBuffer.VertexCount / 2); } What could be causing these lines to not be rendered? Update: I added the below code after I draw my quad and grid and it started working. But I am not sure why that works as I thought this code was to draw the WPF controls elementRenderer.Render(); spriteBatch.Begin(); spriteBatch.Draw(elementRenderer.Texture, Vector2.Zero, Color.White); spriteBatch.End();

    Read the article

  • Keyboard not working 100% after Ubuntu 13.10 upgrade

    - by Marky
    If this has already been asked, my apologies, I did not find it before writing this. So please do point me to the correct page. Anyway, I have this weird issue on my laptop right now. The keyboard is not functioning 100%. This means, I can type my login details to get into Ubuntu. I can type something on Dash. But other than this (on the desktop), no output from the keyboard when using all the other apps - as in I start to type and nothing comes out. The surprising thing is that when I shift to Guest session, the keyboard functions normally. When I shift to another TTY, like Alt+F5, keyboard works normally. This is the first time I've encountered this so far in my use of Linux. Keyboards normally never fail on any of the desktop environments I've used over the years. Any ideas what's happening? Could be the config files on my home is too messy already. I've upgraded this from 11.10 to 13.04, then now 13.10 without a re-install. Works fine so far, until now that I can't do much without a keyboard. Thanks in advance! P.S. Mouse and touchpad works fine.

    Read the article

  • LiveCD not booting/can't install Ubuntu 11.04

    - by user20318
    So, i got a new laptop somedays ago and as usualy, i went formated it to install Ubuntu. Download 11.04 and burned it on my pendrive using my old laptop (running 11.04). When i tryed to boot from the LiveUSB on my new laptop, it just showed me some weird graphics and if i select any option (can't see what im selecting), it gives me a black screen and that is all. Then i tryed to boot with this LiveUSB on my old laptop, and it worked just fine ._. Burned a CD with Ubuntu 11.04 (64bits) and the problem continue. Then i tought it could be my CD Driver, since the laptop is new and all... burned a Windows 7 64 bits DVD and it worked just fine. Also, if i check the CD/Pendrive inside Windows Seven, all the files there are ok. Anyone have any idea of what can be? I found lots of questions about this, but none of them had the weird menus i'm getting ._. oohh... i also get a "prefix is not set" before the weird menu appears :S My sis specs: Intel Core i5 2400 Intel HD 3000 4gb DDR3 If anyone can help, i will be really greatfull ._.

    Read the article

  • Unity no longer loads in 13.04 for main user

    - by user152973
    When Ubuntu starts up, Unity fails to load (I can only see my desktop with no unity sidebar and no system bar in the top right). I tried the advice of Unity does not start in Ubuntu 13.04 which recommended the following commands: dconf reset -f /org/compiz/ unity --reset-icons &disown I ran the commands without errors an restarted the computer, but the problem persists. I am currently running Gnome. I have looked at other pages from the Google search "ubuntu unity failed to load 13.04", but the advice was similar to above and seems to be concerned with a system upgrade in April 18, 2013. I suspect my issue is something far more recent. Please give me advice on how to restore Unity on my account or at least figure out what the problem is. Thank you. Some information that might be relevant: -Unity has worked fine on 13.04 for the 6 months that I've had it until today. (November 10, 2013) -I have set up the update tool to automatically update when available. It is very possible that the system applied some updates without my knowledge. -Interestingly, Unity works fine on the Guest account. -I have made it so the system automatically logs me in at start-up. -This is a personal laptop. No one else has access to it. -I was not doing anything with the system settings or the terminal and have not installed any new software for the past 3 days. -I am running the System76 native Linux laptop Ultra Lemur. I did not contact their support yet because it seemed unlikely that this is a System76-specific error.

    Read the article

  • 11.10 system crashes for no apparent reason [closed]

    - by varanoid
    I'm relatively new to Linux, and while I know a fair amount about computers and programming, it certainly isn't my specialty. I have a dual boot with Windows 7, and it has been working very well for me until recently. Just randomly the computer will freeze. The last time I was smart enough to keep the System Monitor open when it happened, and it looks like at the time of freezing "bash" and a bunch of other processes that I don't recognize seem to have flooded the memory. So it looks like my memory is getting overloaded and this is what is crashing the system, but I honestly have no idea what could be doing it. Generally I have a bunch of programs running, but they don't take much RAM or CPU: Transmission, Libre Office Writer, Firefox, Empathy, and Banshee. Sometimes I also have Text Editor and Terminal open, but it crashes regardless. When it crashes, it seems that all of the programs are working fine but things like windows, the taskbar, and operations like Alt+Tab just stop working properly or at all. Sometimes the mouse and keyboard freeze and I have to power off manually. Other than that I don't know what the problem is. The only irregularity I've experienced is that I can't download "Debian package management system" even though other updates download fine.

    Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >