Search Results

Search found 25180 results on 1008 pages for 'post processing'.

Page 790/1008 | < Previous Page | 786 787 788 789 790 791 792 793 794 795 796 797  | Next Page >

• Gateway laptop module bay light repeating 12 flashes - what error is that?

  - by Simurr

  I have a Gateway M465-E laptop currently running fine with a T2300E Core Duo installed. I wanted to upgrade it to a Core 2 Duo. My brother has the same model laptop and that took a Core 2 Duo (T7200) just fine. Picked up a T7200 on ebay and installed it. Normally when booting all the indicator lights flash once and the fan spins up before the machine actually starts to POST. With the T7200 installed all the lights flash and the fan spins up, but the module bay activity light flashes 12 times repeatedly. I'm assuming this is an error code, but can find no information about it. There are no beep codes. I've removed the ram, HD, Bay module and no change. Switched back to the T2300E and everything works fine. Anyone know what that error code is? The motherboard was actually manufactured by Foxconn if that helps. Update 1 Returned the CPU as defective. I tested it in 3 M465-E's and all of them did exactly the same thing. I still have no idea what the error code is. I'd still like to know for future reference. Perhaps I should try removing the CPU from one of them and see what happens.

  Read the article

• What's the mysql-5.5 compilation configuration arguments on Ubuntu 10.04?

  - by photon

  I want to install mysql 5.5 on my Ubuntu10.04 desktop system. But I'm not sure what arguments I should use after the cmake command. Though I've seen these articles: https://wikis.oracle.com/display/mysql/Cmake Building mysql-5.5.19 from source on ubuntu 11.10 with the static flag Compile MySQL 5.5.15 from source using autorun.sh and cmake, unable to start MySQL after Would anyone like to share the mysql-5.5 configuration arguments of compilation on Ubuntu 10.04? $cmake # what arguments to enter for this command update: cmake . -DBUILD_CONFIG=mysql_release -DCMAKE_INSTALL_PREFIX=/path/to/mysql_installation_dir -DWITH_SSL=no the official web site says it need to use cmake to compile the source package, but according to a teck blog, it doesn't need to compile the source, so which one is correct? When I use Cmake, I also had following error message: $ sudo cmake . -DBUILD_CONFIG=mysql_release -DCMAKE_INSTALL_PREFIX=/usr/local/mysql_community_5.5 -- The CXX compiler identification is unknown CMake Error: your CXX compiler: "CMAKE_CXX_COMPILER-NOTFOUND" was not found. Please set CMAKE_CXX_COMPILER to a valid compiler path or name. CMake Error at cmake/build_configurations/mysql_release.cmake:126 (MESSAGE): Clarification: I'm not clever and I'm a slow-thinking guy. And I cannot find a clever guy around me to give me some useful help. So I come here and hope someone is kind and generous enough to take the time to post the details.

  Read the article

• How To Boot with "mem=1024m" Argument using GRUB - Ubuntu 10.04

  - by nicorellius

  I am still working on this question. This new one is a different question so I thought it would be good to post a new question. Is this the proper protocol or should I have just edited the other question? I'm running Ubuntu 10.04 with the kernel 2.6.32-22-generic on a Toshiba Satellite laptop. When I enter the GRUB menu (I have Ubuntu 9.10 installed as well), I can choose which kernel to boot. I use scroll down to the one I want and press "e" and I expect to be able to enter mem=1024m and force the kernel to use this much memory. But when I run cat /proc/meminfo or look in the process manager after booting wth this argument I still see all the RAM: ~2 GB. Am I using this boot argument incorrectly? The boot configuration (before I add anything) looks like this: insmod ext2 set root=(hd0,1) search --no-floppy --fs-uuid --set 10270f21-1c42-494b-bd3f-813c23f6d\ 518 linux /boot/vmlinuz-2.6.32-22-generic root=UUID=10270f21-1c42-494b-b\ d3f-813c23f6d518 ro quiet splash initrd /boot/initrd.img-2.6.32-22-generic The way I did this was that I added the mem=1024m after the last line and pressed Ctrl+x (Emacs save and boot the kernel) and the system booted. I tried adding mem=1024m to the end and the beginning of this list and it appeared to not change the RAM allocation.

  Read the article

• Good HTTP Monitoring tools

  - by ffffff

  I look for HTTP to work with a Linux system server monitor tool every protocol. I know, and will not there be it in whom or a freeware? When, for example, I dump 80/tcp with a packet monitor to be concrete # tethereal -i ppp0 port 80 -x Capturing on ppp0 1244206390.030474 219.111.xx.xx -> 74.125.xx.xx HTTP GET /search?output=js&num=0&dt=1244206414703&client=pub-3031568651010206&q=Cagliari%20Flight&ad=n3&ie=utf8&oe=utf8&channel=0091594208&adtest=off HTTP/1.1 0000 00 04 02 00 00 00 00 00 00 00 00 00 00 00 08 00 ................ 0010 45 00 01 e5 ee 82 40 00 40 06 d2 b5 db 6f 02 5b E.....@[email protected].[ 0020 4a 7d 4f 93 d4 29 00 50 3e df 4c 63 4b 6b 42 e0 J}O..).P>.LcKkB Such output is provided, but there is too much unnecessary information such as an SYN packet or a header. What I want The IP address of the client and sending out character string(Get; the contents of the POST) Among the output character string of the server only as for the HTML (Content-Type:) I am what is chisel) of a thing of text/html. I can set a filter and am the best if only information wanting can accumulate in the log.

  Read the article

• Enabling http access on port 80 for centos 6.3 from console

  - by Hugo

  Have a centos 6.3 box running on Parallels and I'm trying to open port 80 to be accesible from outside tried the gui solution from this post and it works, but I need to get it done from a script. Tried to do this: sudo /sbin/iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT sudo /sbin/iptables-save sudo /sbin/service iptables restart This creates exactly the same iptables entries as the GUI tool except it does not work: $ telnet xx.xxx.xx.xx 80 Trying xx.xxx.xx.xx... telnet: connect to address xx.xxx.xx.xx: Connection refused telnet: Unable to connect to remote host UPDATE: $ netstat -ntlp (No info could be read for "-p": geteuid()=500 but you should be root.) Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN - tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:37439 0.0.0.0:* LISTEN - tcp 0 0 :::111 :::* LISTEN - tcp 0 0 :::22 :::* LISTEN - tcp 0 0 ::1:631 :::* LISTEN - tcp 0 0 :::60472 :::* LISTEN - $ sudo cat /etc/sysconfig/iptables # Generated by iptables-save v1.4.7 on Wed Dec 12 18:04:25 2012 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [5:640] -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT -A INPUT -j REJECT --reject-with icmp-host-prohibited -A INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT # Completed on Wed Dec 12 18:04:25 2012

  Read the article

• samba access from win98

  - by SimonSalman

  Hello, the admin installed a new file server in our institute: OpenSuse 11.1 with Samba 3.2.7-11.3.2-2154-SUSE-CODE11. They copied the smb.conf from the old machine (hosting Samba 3.0.0) to the new one. Everything works as before, but one Windows 98 machine can see but not access the file server. It prompts for user authentication, but will not accept any user-password combination. There exists a lot of discussion about the problem on the net, but none provided a clear answer to the problem. EDIT: 1. I changed Win98 registry enable plain-text passwords, and alternatively changed server's smb.conf and /etc/smbpasswd to accept encrypted passwords 2. Further I provide a profile with a user-password combination on Win98 machine similar to one of the samba users-password combinations. 3. I changed smb.conf such that the samba server is the Local Master Browser all these changes are not necessary when using the older samba server. So, I conclude that a configuration problem on the server side is likely. If you need any further information, I will post them here. Best regards, Simon

  Read the article

• Ubuntu: Network connection seems to fail after some time

  - by chrischu

  I just bought a Shuttle XS-35 barebone mini-PC and put a 1 TB WD hard drive and 2 Gigs of RAM into it and installed Ubuntu onto it. The machine will post as a media server (streaming videos to my PS3) and as a webserver for some small private projects. Now I wanted to copy my videos from my Windows 7 machine to the Ubuntu machine and therefore created a Samba share on the Ubuntu machine. I tried copying the files with the standard Windows copy function and with SyncToy but after some time (sometimes 5 copied files, sometimes 120 copied files) the Samba share just disappears. When that happens I can't reach the internet from the Ubuntu machine although the network connection still seems to be fine (IP still there etc.). Between the machines lies a LinkSys router. When I try to ping my router (after the connection doesn't work anymore) from the Ubuntu machine only a very small subset of the packages actually get there (something around 20%). When I restart the Ubuntu machine everything seems to work normal again. I have no idea where the problem lies here. Does anybody have a clue? Thanks in advance!

  Read the article

• Do I need to update some of my Debian Squeeze software?

  - by stan31337

  I have installed Debian 6, and LAMP stack from squeeze repository (default). After upgrading Apache 2.2.16 from unstable repository to 2.2.22, thanks to this post - how to upgrade already installed apache2 on debian (lenny) I'm thinking to upgrade all other software packages that I've previously installd from squeeze repository. Should I upgrade them to the ones from unstable repository? Should I upgrade all of them or just selected ones? Here's the list: * arno-iptables-firewall 1.9.2.k-4 >> 2.0.1.c-1 * bind9 1:9.7.3.dfsg-1~squeeze6 >> 1:9.8.1.dfsg.P1-4.2 * php-apc 3.1.3p1-2 >> 3.1.13-1 * fail2ban 0.8.4-3+squeeze1 >> 0.8.6-3 * exim4 4.72-6+squeeze2 >> 4.80-4 * altermime 0.3.10-4 >> 0.3.10-7 * rrdtool 1.4.3-1 >> 1.4.7-2 * vsftpd 2.3.2-3+squeeze2 >> 3.0.0-4 Also I would like to ask how to upgrade 5.3.3 5.3.16, unstable repository has 5.4.x versions only, I don't think I'm ready to move from 5.3 to 5.4 yet. Actually I'm a newbie in Linux, and after Windows experience I have a paranoidal idea to update software to the latest release. I'd be glad for any suggestions and recommendations! Thank you very much!

  Read the article

• Single Sign On 802.1x Wireless - saying “Connecting to <SSID>”, hangs for 10 seconds, fails with “Unable to connect to <SSID>, Logging on…”.

  - by Phaedrus

  We are implementing WiFi on Windows 7 machines in our corporate environment. Machines should be able to log into the domain by WiFi as the Machine (Pre-Logon), and as the User (Post-Logon). We have everything working correctly except for 2 things: 1) Sometimes the login scripts don't run 2) The user VLAN is sometimes different than the machine vlan, and no DHCP renew occurs after user logon. I am clear that both these problems should be fixable by using the "Single Sign On" Option under the 802.1x Wireless Vista GPO, and setting the wireless to connect immediately before user logon and also by enabling "This network uses different VLAN for authentication with machine and user credentials" If I enable these GPO settings in a lab, the computer does authenticate & gets WIFI before the user logs on, so when the login box is displayed, it says “Windows will try to connect to ”, even though it is already connected (which should be ok?). Enter the user credentials and it goes to a screen saying “Connecting to ”, hangs for 10 seconds, fails with “Unable to connect to , Logging on…”. Desktop fires up and then the user re-authenticates with no problem as himself instead of the machine, but by that point, we defeat the point of the WiFi SSO “before user logon”. Also by that point, no DHCP renew seems to occur, and the user is still stuck with the wrong IP address for the new VLAN. When the “Connecting to ” screen comes up, there’s no indication on the AP or the Radius server that anything whatsoever is happening after credentials are entered until after the domain logon. Also with this policy enabled, sometimes windows hangs on a black screen indefinitely until I disable the Wireless NIC, so something is knackered for sure. What have I missed? Suggestions are much appreciated... /P

  Read the article

• Win 7 firewall won't turn on, nor the McAfee firewall. Hit by "Win 7 Anti-virus 2012" trojan. Removed, but a downed firewall is a lasting legacy

  - by PhxTitan

  I caught the Trojan right away, I think, but both my McAfee & Win 7 (x64) firewalls are not able to be engaged/turned on now. MS Error Code 0x80070424 when attempting to turn on Win 7 firewall. No viruses. Swept it with McAfee AV, Malwarebytes Anti-Malware, Microsoft malware removal tools. Followed Microsoft's three courses of alternative actions they posted for instructions for getting the Win 7 firewall back up and on. Nothing. Same error code. The post just said see MS support if those fixes failed. So I removed McAfee altogether. Still Win 7 (professional version) firewall won't come on; and clean of detectable bugs. And I'm fully updated with MS Windows 7 updates as well, which is no longer automatic, that too a legacy of the trojan bug I think. Any thoughts on how to get the Win 7 firewall operational??? And auto updating reengaged?

  Read the article

• What are the possible problems, when wget returns code 500 but same request works in normal browsers?

  - by markus

  What should I be looking for, when wget returns 500 but the same URL works fine in my web browser? I don't see any access_log entries that seem to be related to the error. DEBUG output created by Wget 1.14 on linux-gnu. <SSL negotiation info stripped out> ---request begin--- GET /survey/de/tools/clear-caches/password/<some-token> HTTP/1.1 User-Agent: Wget/1.14 (linux-gnu) Accept: */* Host: testing.thesurveylab.net Connection: Keep-Alive ---request end--- HTTP request sent, awaiting response... ---response begin--- HTTP/1.0 500 Internal Server Error Date: Wed, 12 Dec 2012 14:53:07 GMT Server: Apache/2.2.3 (CentOS) Set-Cookie: blueprint2-staging=8jnbmkqapl30hjkgo0u6956pd1; path=/ Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Strict-Transport-Security: max-age=8640000;includeSubdomains X-UA-Compatible: IE=Edge,chrome=1 Content-Length: 5 Connection: close Content-Type: text/html; charset=UTF-8 ---response end--- 500 Internal Server Error Stored cookie testing.thesurveylab.net -1 (ANY) / <session> <insecure> [expiry none] blueprint2-staging 8jnbmkqapl30hjkgo0u6956pd1 Closed 3/SSL 0x0000000001f33430 2012-12-12 15:53:07 ERROR 500: Internal Server Error.

  Read the article

• Computer hangs at BIOS screen. Cannot enter setup.

  - by d2jxp

  I have an HP Pavilion a6500f (it's a year out of warranty) and it's hanging on the blue HP BIOS screen. If I mash F10 while it's starting up, it will say "Entering Setup..." but I will see no results. It will hang there and not do anything. If I actually wait until I can see the screen and then hit F10, there's no response at all and the computer will sit at the BIOS menu. I've dusted and cleaned it out, reseated the memory, switched the RAM slots, and reset the CMOS battery using the reset jumper. I'm out of ideas. I'm pretty sure it's not a hard drive issue, since my problem is at the BIOS. After this post, I'll disconnect the hard drive and try to just boot without it. Anyone have any other ideas? Edit: Okay, so I tried disconnecting the hard drive and now I can get back into the BIOS. I reconnected it and I'm locked out again. So the problem is my hard drive.. I guess I should delete this post unless someone has any ideas as to what's wrong with the drive?

  Read the article

• Master File Table Corrupt, any way to save data?

  - by domen

  hi. I've used search, but none of the results match my problem so I didn't have to ask separate question. I've Installed Windows 7 RTM recently and since then partitions located on one of my HDDs have gone "crazy". They used to "freeze" and didn't open in explorer for some time (minute or two, usually), sometimes all partitions of the drive wouldn't show until reboot and finally, one of those partitions started showing "disk structure is corrupted and unreadable" warning, it appeared in Disk Management window as RAW and chkdsk showed "mft corrupt". There were no important data on the partition and I didn't have enough time to analyze the problem at the moment, so I just reformatted it and ran antivirus scan on system. After that problem settled for some time, but yesterday the problematic HDD vanished again from the system. After reboot chkdsk identified mft of four partitions corrupt and now they are all in same conditions as the above mentioned one. But the difference is that the files stored in them are extremely important. and just for info: I upgraded from Win7 build 7077, but had some performance issues, so I reformatted system drive and installed fresh Win7 RTM on it. I've downloaded TestDisk and it shows all the partitions marked as NTFS (not RAW) and my knowledge of the program wasn't sufficient to obtain any other info from it :-) and the images that could help describe the problem (sorry, I'm not allowed to post images and more than one hyperlink): http:// img22.imageshack.us/img22/5909/chkdskz.jpg http:// img198.imageshack.us/img198/5576/computeray.jpg I'm interested, is there a way to let me restore the MFT or just access files so I can backup them before reformatting the drive. Thanks for your time. :) P.S. my reformatted drive is showing no problems, could there be a problem with windows 7 itself? I googled, but with no results.

  Read the article

• Localhost stop resolving/serving local site after a few clicks IIS 7.5

  - by Jo-Pierre

  previously I have searched tried to find the answer from a previous question, however Im not sure it was resolved. I could comment on the question to find more, so decided to post a new question. Previous question found (http://serverfault.com/questions/314333/localhost-stop-resolving-after-a-few-minutes-iis-7-5) So I set up a new website on Windows 7 IIS 7.5 ... I give it a host header and in the hosts file I add the entry for 127.0.0.1 and browse the site. After about the second or third time of trying to click around on the local site, it starts hanging ... just seems to be looking like its trying to load, but just eventually comes back in Firefox with "The connection was reset" (takes about 30-50 secs before this happens). I then used a program like CurrPorts, to view the ports that are listening, and for the initial request it all seems good. Now after the site is hanging, I dont see the hit coming through anymore. Its as if the browser loses touch with IIS or something. If I open a different browser, works fine for about 2 clicks or so, then same problem. Anyone know what could be causing this? Or how to resolve?

  Read the article

• Can mod-rewrite be used to set environmental variables?

  - by VLostBoy

  Hi, I've got an existing simple rewrite rule like so: <Directory /path> RewriteEngine on RewriteBase / # if the requested resource does not exist RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # route the uri to a front controller RewriteRule ^(.*)$ index.php/$1 [L] </Directory> This works fine, but I want to do one of either two things. On the basis of detecting the clients accept-language header, I want to either (i) Set the detected language as an environmental variable that the script can use or (ii)Rewrite the request so that the url begins with the language code (e.g. www.example.com/en/some/resource) In terms of implementing (i), I defined this rule: <Directory /path> RewriteEngine on RewriteBase / # if the requested resource does not exist RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d # if the users preferred language is supported... RewriteCond %{HTTP:Accept-Language} ^.*(de|es|fr|it|ja|ru|en).*$ [NC] # define an environmental variable PREFER_LANG RewriteRule ^(.*)$ - [env=PREFER_LANG:%1] # route the uri to a front controller RewriteRule ^(.*)$ index.php/$1 [L] </Directory> I've tried a few variations, but PREFER_LANG is not defined in $_SERVER nor retrievable by getenv. In terms of implementing (ii)... lets just say its messy. I'll post it if I can't get an answer to one. Can anyone advise me? Thanks!

  Read the article

• Protect all XML-RPC calls with HTTP basic auth but one

  - by bodom_lx

  I set up a Django project for smartphone serving XML-RPC methods over HTTPS and using basic auth. All XML-RPC methods require username and password. I would like to implement a XML-RPC method to provide registration to the system. Obviously, this method should not require username and password. The following is the Apache conf section responsible for basic auth: <Location /RPC2> AuthType Basic AuthName "Login Required" Require valid-user AuthBasicProvider wsgi WSGIAuthUserScript /path/to/auth.wsgi </Location> This is my auth.wsgi: import os import sys sys.stdout = sys.stderr sys.path.append('/path/to/project') os.environ['DJANGO_SETTINGS_MODULE'] = 'project.settings' from django.contrib.auth.models import User from django import db def check_password(environ, user, password): """ Authenticates apache/mod_wsgi against Django's auth database. """ db.reset_queries() kwargs = {'username': user, 'is_active': True} try: # checks that the username is valid try: user = User.objects.get(**kwargs) except User.DoesNotExist: return None # verifies that the password is valid for the user if user.check_password(password): return True else: return False finally: db.connection.close() There are two dirty ways to achieve my aim with current situation: Have a dummy username/password to be used when trying to register to the system Have a separate Django/XML-RPC application on another URL (ie: /register) that is not protected by basic auth Both of them are very ugly, as I would also like to define a standard protocol to be used for services like mine (it's an open Dynamic Ridesharing Architecture) Is there a way to unprotect a single XML-RPC call (ie. a defined POST request) even if all XML-RPC calls over /RPC2 are protected?

  Read the article

• Problem running “Central Administration” website after windows update at Windows 2003 Server Standar

  - by Magdy Roshdy

  I was have WSS 2.0 and then I upgraded to WSS 3.0 and the old instalation database was SQL 2000, now I have another SQL Server instance called:server_name\MICROSOFT##SSEE . After upgrade every thing works fine and our team started to use the portal and we sent lot of documents and make lot of activities on it. The problem started after installing Windows updates the website suddenly stopped and giving me an error "Cannot connect to the configuration database" If I tried to open SharePoint Products and Technologies Configuration Wizard it is gives me a strange error says: "An exception of type Microsoft.SharePoint.PostSetupConfiguration.PostSetupConfigurationTaskException was thrown. Additional exception information: SharePoint Products and Technologies cannot be configured. The current installation mode does not support SKU to SKU upgrades because there exists an older version of Windows SharePoint Services that must be upgraded first " At this post:http://stackoverflow.com/questions/114398/iis-error-cannot-connect-to-the-configuration-database/249494#249494 the guy of the second answer have the same problem and he suggested a solution but I don't understand well. I tried as he suggested to make the identity of the app pool of the SharePoint web site as "IWAM_server_name " after that the error changed as he said and I web site give me "Server Application Unavailable " and when checked the Event Viewer at the server I found that ASP.NET 2.0 give this exception: "Could not load file or assembly 'System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. Access is denied ." and I don't know how to solve this problem. I'm really want to make my web site working because our team really need these documents and its stuff. I hope I will find some one to help me.

  Read the article

• Any ideas why Ettercap filters aren't seeing packet data?

  - by Bryan

  I'm using an Ettercap filter to detect a query response coming back from a particular service on a remote machine. When I see a response from the service, I'm searching through the data in the packet to see if an offset is a specific value, and if so I'm changing the value at another offset. Trouble is, when I try this on a new virtual machine I built my Ettercap filter's no longer getting any data in the DATA.data variable available to it. if(ip.proto == TCP && tcp.src == 17867) { msg("Response seen!\n"); if(DATA.data + 2 == "\0x01") { msg("Flag detected!\n"); DATA.data + 5 = 0x09; } } The filter's getting applied to the traffic because "Response seen!" messages get printed out by Ettercap. However, "Flag detected!" messages do not. I think DATA.data is indeed empty because if I change my second "if" statement to check for DATA.data == "" then the "Flag detected!" message gets printed. Any ideas why this may be happening?! Also, if this is the wrong site to be asking questions like this, please let me know. I wasn't sure if it fit better here or somewhere like superuser or serverfault. By the way, this is a cross-post from StackOverflow... I should have posted on this forum instead I think. :)

  Read the article

• Home Network Stopped Working

  - by James

  I have a home network where a machine running Windows 7 Ultimate N acts as a central hub for other devices to access media. This has been running for around 2 years now and there has been no recent configuration changes. The machine has a static IP address (192.168.0.3), which also has not been changed. A few laptops, Sonos music system and mobiles are using the machine for music/video mostly. Additionally, post 3389 was also open for RDP. I used a no-ip agent to map a hostname so I could RDP to the machine from the internet. As of yesterday when I try to ping the machine, I get PING:Transmit Failed, General Error I noticed however, the IP it is pinging is 0.0.2.233. All shares etc are no longer functioning including RDP. On the machine itself, an IP config shows like nothing has changed. It still shows the expected IP. If I ping itself from its hostname, I get the same error as above. machine has been rebooted, the router has been also. Any ideas where to even start on this?

  Read the article

• Starting old computer - nothing shown on screen at boot

  - by Jonas

  I'm trying to start an about 10 years old PC computer. But nothing is shown on the screen, and it beeps everytime I press a key on the keyboard. I can press Ctrl+Alt+Del to reboot the computer. The monitor is newer and seem to work with other computers. I don't see anything from POST/BIOS at start or later. I have tried to change to another graphic card, but it didn't change anything. What can I do to solve this problem? Update: I have now tried with another computer (the one where the "another graphic card" came from) and I got the same problem. I doesn't show anything on the screen. Both these computers had a GeForce2 MX 400 graphic card. I tried with another computer screen it didn't work - it was showing "signal out of range". So is the graphic card GeForce2 MX 400 too old for newer TFT-monitors? I tried with a third computer so I know that the monitors are working, and both monitors work fine with that computer.

  Read the article

• How to show what will be updated next pull?

  - by ???

  In SVN, doing svn update will show a list of full paths with a status prefix: $ svn update M foo/bar U another/bar Revision 123 I need to get this update list to do some post-process work. After I have transferred the SVN repository to Git, I can't find a way to get the update list: $ git pull Updating 9607ca4..61584c3 Fast-forward .gitignore | 1 + uni/.gitignore | 1 + uni/package/cooldeb/.gitignore | 1 + uni/package/cooldeb/Makefile.am | 2 +- uni/package/cooldeb/VERSION.av | 10 +- uni/package/cooldeb/cideb | 10 +- uni/package/cooldeb/cooldeb.sh | 2 +- uni/package/cooldeb/newdeb | 53 +++- ...update-and-deb-redist => update-and-deb-redist} | 5 +- uni/utils/2tree/{list2tree => 2tree} | 12 +- uni/utils/2tree/ChangeLog | 4 +- uni/utils/2tree/Makefile.am | 2 +- I can translate the Git pull status list to SVN's format: M .gitignore M uni/.gitignore M uni/package/cooldeb/.gitignore M uni/package/cooldeb/Makefile.am M uni/package/cooldeb/VERSION.av M uni/package/cooldeb/cideb M uni/package/cooldeb/cooldeb.sh M uni/package/cooldeb/newdeb M ...update-and-deb-redist => update-and-deb-redist} M uni/utils/2tree/{list2tree => 2tree} M uni/utils/2tree/ChangeLog M uni/utils/2tree/Makefile.am However, some entries having long path names are abbreviated, such as uni/package/cooldeb/update-and-deb-redist is abbreviated to ...update-and-deb-redist. I deem I can do with Git directly, maybe I can configure git pull's output in special format. Any idea?

  Read the article

• Problem with Strange VMWare behaviour when shutting down guest.

  - by adza77

  Hi, I've been having a problem for a while now with VMWare Workstaion. (Originally with 6.5, but now with 7.0 and 7.0.1 too). The problem occurs when I choose to shut down a guest. VMWare itself seems to hang. If I choose to shut down a guest that's opened full screen, and during the process I minimise the screen to work on other applications in the host, often (not all the time) when I return to the guest I have a 'greyed out' screen and the system becomes unresponsive. The host O/S still seems to be working, but I am unable to switch to other applications. (I can bring up the taskbar on the host and 'see' other applications and even switch to them, but VMWare still stays 'on top' being unresponsive). I can not terminate VMWare even when windows says that the application has become unresponsive and gives me the option to terminate. VMWare stays on top, and I'm forced to either shutdown, or log off and log back on in order to regain control of my computer. This happens with both Windows 7 and Windows Vista guest operating systems (32 bit), and I have had it happen on multiple host machines, and multiple guest machines too. Current Host: Windows 7 64 bit, 8GB Ram, 500GB HDD, i7 Processor. I have been searching for more than 6 months for a solution but have found none, so finally decided to post here. Does anyone know what might be causing the problem (+or even how to minimize the VM so I can at least access any other applications and save work before forcing a logoff / reboot+) would be extrememly handly. If I know the correct keystrokes to save and close in an application on the host I can do this by task-switching to the desired app to save and close successfully, but I can't see what I'm doing because VMWare Workstation is still on-top 'greyed' out. Cheers Adam.

  Read the article

• Problem with Strange VMWare behaviour when shutting down guest.

  - by adza77

  Hi, I've been having a problem for a while now with VMWare Workstaion. (Originally with 6.5, but now with 7.0 and 7.0.1 too). The problem occurs when I choose to shut down a guest. VMWare itself seems to hang. If I choose to shut down a guest that's opened full screen, and during the process I minimise the screen to work on other applications in the host, often (not all the time) when I return to the guest I have a 'greyed out' screen and the system becomes unresponsive. The host O/S still seems to be working, but I am unable to switch to other applications. (I can bring up the taskbar on the host and 'see' other applications and even switch to them, but VMWare still stays 'on top' being unresponsive). I can not terminate VMWare even when windows says that the application has become unresponsive and gives me the option to terminate. VMWare stays on top, and I'm forced to either shutdown, or log off and log back on in order to regain control of my computer. This happens with both Windows 7 and Windows Vista guest operating systems (32 bit), and I have had it happen on multiple host machines, and multiple guest machines too. Current Host: Windows 7 64 bit, 8GB Ram, 500GB HDD, i7 Processor. I have been searching for more than 6 months for a solution but have found none, so finally decided to post here. Does anyone know what might be causing the problem (+or even how to minimize the VM so I can at least access any other applications and save work before forcing a logoff / reboot+) would be extrememly handly. If I know the correct keystrokes to save and close in an application on the host I can do this by task-switching to the desired app to save and close successfully, but I can't see what I'm doing because VMWare Workstation is still on-top 'greyed' out. Cheers Adam.

  Read the article

• nginx with fail2ban and mod_security

  - by Mahesh

  I forgot to update my fail2ban config for nginx. I just moved to nginx from apache. Today, I got a lot of cals from a single IP. IP tried to access login pages with post and get methods IP tried to use nginx as a proxy (GET http:/...) IP searched images, js, css folders IP tried to inject -d url_allow_fopen =1 and something similar. Most of the calls ended with 404. http { limit_req_zone $binary_remote_addr zone=app:10m rate=5r/s; ... server { ... location / { limit_req zone=app burst=50; } I got approximately 50 requests from that ip for a second. So i updated my nginx like the above. Will it avoid too many connections per second now? I have updated my fail2ban jail.local to support nginx. I am confused with the nginx-noscript.conf [Definition] failregex = ^<HOST> -.*GET.*(\.php|\.asp|\.exe|\.pl|\.cgi|\scgi) ignoreregex = I am serving php with nginx. I checked apache's noscript.conf and which has .php extension on it too. I tested this above settings before restarting fail2ban and got thousands of ips matched. I removed php and nothing matched. Do i need .php| in nginx-noscript.conf? Using mod_security and fail2ban together bring any problem? When i was searching today, i came to know mod_security is available for nginx too. So i am planning to use it too.

  Read the article

• Ubuntu 12.04 can't boot after installing with software RAID 1

  - by Bill

  I've been trying to install Ubuntu with software RAID on my server and there is obviously something that I don't understand about the process. This is the guide that I followed: https://help.ubuntu.com/11.04/serverguide/advanced-installation.html I have two identical 1 TB disks in my server. I went through the initial install process and manually set up my partitions. On each disk I set up: (1) 100 MB partition for EFI boot (I didn't originally have this but added it based on a forum post I found after my original install failed to boot, I ended up with EFIboot since that was what the 'guided partitioning' decided to do) (1) 970 MB partition for / (1) 30 MB partition for swap I then created new RAID 1 disks combining the two partitions, one from each disk, such that each partition is mirrored. I then configured their usage as stated above. After saving the configuration I said yes to boot in a degraded state. The rest of the setup went normally, no errors of any kind. I saw GRUB being installed and again no errors. However, after rebooting the server I get the dreaded 'Insert boot media' and nothing happens. I loaded up the recovery disk and the mdadm configuration looks correct. md0 is my EFIBoot partition md1 is my \ partition using ext4 md2 is my swap partition Running file -s /dev/md0 doesn't indicate that GRUB is there and so I attempted to reinstall GRUB using the recovery disk. I selected the md0 disk and it appeared to install just fine. Running file -s /dev/md1 shows the error needs journal recovery, I'm not sure if that's related or not or how to fix that. Rebooting gives me the same problem, no boot media found. I've searched around the internet but can't figure out what to do next or more importantly how to troubleshoot what exactly is going wrong. Thanks!

  Read the article

< Previous Page | 786 787 788 789 790 791 792 793 794 795 796 797  | Next Page >