Search Results

Search found 25386 results on 1016 pages for 'zend test'.

Page 797/1016 | < Previous Page | 793 794 795 796 797 798 799 800 801 802 803 804  | Next Page >

• LYNC / OCS... problems getting edge server working.

  - by TomTom

  New setup Lync 2010 (i.e. OCS 2010). I have serious problems getting my edge system going. Internally things work fine. Externally I am stuck. I have used the tester at https://www.testocsconnectivity.com/ and it also fails. NOTE: I use the domain xample.com / xample.local here just as example. Here is the setup. I have 2 internal hosts (lync.xample.local, edge.xample.local). edge.xample.com is also correctly in dns. and points to the edge.xample.local external assigned ip address (external interface). Externally, I have the following dns entries: edge.xample.com _sip._tcp - edge.xample.com 443 _sipfederationtls._tcp - edge.xample.com 5061 _sipinternaltls._tcp - lync.xample.local 5061 _sip._tls - edge.xample.com 443 My problem is that the ocs connection test always ends up trying to contact lync.xample.local (i.e. the internal address) when connecting to [email protected]. The error is: Attempting to Resolve the host name lync.xample.local in DNS. This shows me it clearly manages to connect to SOMETHING, but it does either fall through to the _sipinternaltls._tcp entry, OR it does get that internal entry wrongly from the edge system. Am I missing some entries or have some wrong?

  Read the article

• Monitoring multiple sites on a single server using OpsView

  - by Kev

  We have several web servers. On each of these servers there can be ~250 web sites. I need to add a HTTP check for each site on each server. Each site has a reserved host header that we know can always be resolved in the format of: w10000.hostchecks.mycompany.com w10020.hostchecks.mycompany.com w11992.hostchecks.mycompany.com ..and so on.. What I want is for there to be a master ping check on the web server's main IP address and then separate HTTP checks for each of the sites on the server. If the master ping test fails then I want the HTTP tests to cease until the master ping check goes OK. I had a stab at this and tried do the following: Create a parent host that does a ping check on the server's main ip address (e.g. server is named WEB0001). For each of the sites that reside on WEB0001: Create a separate Host with a Primary Hostname of wXXXXX.hostchecks.mycompany.com Make WEB0001 the parent host Add a monitor (HTTP check to a special url that is mapped into each site using a virtual directory: H- $HOSTADDRESS$ -u /__hostcheck/IsAlive.aspx -w 5 -c 10 -p 80 However I find that if I down the parent server (WEB0001) the http checks seem to continue. Am I going about this completely the wrong way?

  Read the article

• Creating basic, redundant gigE or IB storage network for Xen?

  - by StaringSkyward

  With only a modest budget, I want to move my 4 xen servers over to network storage -either NFS or iSCSI which will be determined based on how well it performs when we test it (we need good throughput and it must continue to work through link and switch failure tests). We may add another couple of xen servers at some point when this is done. I don't know much about the design and operation of storage networks, so would really appreciate some hints from those with experience. The budget is around $3,800 excluding the storage appliance. I am currently thinking these are my options to remain on budget: 1) Go for used infiniband hardware and aim for 10gb performance. 2) Stick with gig ethernet and buy some new switches (cisco or procurve) to create a storage-only ethernet LAN. Upgrade to 10gigE later but try to use hardware capable of it where possible to reduce upgrade costs. I have seen used, warrantied infiniband switches at reasonable prices (presumably because big companies are converging on 10gbit ethernet?) and the promise of cheap 10gb is attractive. I know nothing about IB, so here come the questions: Can I buy 2 x switches and have multiple HBAs in my xen and storage nodes to get redundancy and increased performance without complexity or expensive management software costs? If so, can you point me to some examples? Do NFS and iSCSI work just the same regardless? Is IB a sensible choice or could/should I use ethernet or FC on the same budget - I'm keen not to get boxed into a corner for future upgrades, however. For the storage I am likely to build a storage server using nexentastor with the intention that I can later add more disks, SSDs and add another server to provide a failover option at the storage level. An HP LeftHand starter SAN is also under consideration, too. Thanks in advance.

  Read the article

• vmware vmdk disk problem

  - by dmtr

  Hello, I have a vmware esxi 4 server and 2 storage servers (mount as nfs). Between the storage servers (fedora 14) is made drbd cluster (dual primary) and ocfs2 filesystem, also every server has local partition with ext4 filesystem, both are mounted as nfs on esxi server. When i tried to copy a virtual machine (naturally it power off) files from ext4 partition to ocfs2 partition, vmdk total file size is different, but md5sum is the same. on ext4 partition: # ls -la total 28492228 -rw------- 1 root root 42949672960 Jan 14 14:46 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 on ocfs2 partition: # ls -la total 13974660 -rw------- 1 root root 42949672960 Jan 14 16:16 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 When i power on the virtual machine from ocfs2 partition it dosn't work. I have a windows on the virtual machine and it freez?s after windows logo. From ext4 partition the virtual machine is worked. Test with linux (create and install on ext4 partition and copy) the same problem appears. When i create a virtual machine directly from ocfs2 partition, there are no problems. I tried to copy via vSphere client, and i have the same problem. Any suggestions ?

  Read the article

• Warning for "Reallocated Event Count" S.M.A.R.T. attribute with a new/unused drive. How serious is t

  - by Developer Art

  I've just looked at the health status of my old 2,5 inch 500 Gb Fujitsu drive with a popular "HD Tune" utility. It shows a warning for the "Reallocated Event Count" property. How serious is that? The thing is that the drive is practically new. I pulled it out of a new laptop over a year ago and never used it since. Right now it only has 53 "Power On" hours which sounds about right since I only had it running a few evenings overnight before switching it for something more performant. Does this warning indicate that the drive is likely to fail some time in the future? I'm somewhat perplexed since the drive is effectively unused. What is more, I have arranged with somebody to buy off this drive since I don't really need. It is 12,5 mm thick (with 3 plates) meaning it doesn't fit into an external enclosure which makes it quite useless to me. Can I give away the drive without having it on my conscience or better cancel the deal? In other words, can the drive be used safely for years to come or better throw it away? I'm running a sector test now to see if there are any real problems. Will post the results as soon as they're available.

  Read the article

• Outlook 2007/2010 autodiscovering old Exchange info

  - by Dan

  I currently have an Exchange setup as follows: two Exchange 2003 servers clustered together set up as the current mailbox stores, one Exchange 2003 setup as a frontend, one Exchange 2007 set up as a frontend (was set up for testing by my predecessor, never really used intentionally), and now four Exchange 2010 servers - two mailboxes in a DAG and two with Hub/CAS. Everything seems to be working fine with one exception - Outlook 2007/2010 clients are still autodiscovering the test 2007 frontend and not the 2010 CAS array. I know this because there's an expired cert on the 2007 box so the client displays a cert error when you attempt to autocreate the outlook profile. From what I've read, there is an SCP (Service Connection Point) in AD that is pointing to the old server and it is getting returned first, causing Outlook to try it first. How can I prevent Outlook from even attempting to connect to this 2007 box from now on? http://www.msexchange.org/articles_tutorials/exchange-server-2010/management-administration/exchange-autodiscover.html When Outlook 2007 is installed on a domain joined workstation then the Outlook client will query Active Directory for the Autodiscover information. Active Directory will return a list of SCP’s and the Outlook client will automatically select the first SCP in this list. Using the information found in the SCP the Outlook client will contact the Client Access Server for its configuration information and the Outlook client will be configured automatically.

  Read the article

• CNAME rule being ignored

  - by Ben

  On a server with Plesk installed I have added a CNAME rule pointing from one of the sites subdomains to an external website. I have checked the named configuration for that domain name and it shows the CNAME however the sub domain just points to the default server page and ignores the CNAME rule. Named has been restarted and I've also run the rvmng reconfigure-vhost command. I edited another server to test this, on cPanel, and it works fine. The conf file for the domain: ; *** Ts file is automatically generated by Plesk *** $TTL 86400 @ IN SOA ns.example.com. cf.example1.com. ( 1292946742 ; Serial 10800 ; Refresh 3600 ; Retry 604800 ; Expire 10800 ) ; Minimum example.com. IN NS ns.example.com. ns.example.com. IN A xx.xxx.xxx.xx example.com. IN A xx.xxx.xxx.xx webmail.example.com. IN A xx.xxx.xxx.xx mail.example.com. IN A xx.xxx.xxx.xx beta.example.com. IN A xx.xxx.xxx.xx ftp.example.com. IN CNAME example.com. www.example.com. IN CNAME example.com. login.example.com. IN CNAME socialize.gigya.com. example.com. IN MX 10 webmail.example.com. You can see the CNAME rule in the file but it just gets ignored? Thanks in advance for any help.

  Read the article

• Proxying from nginx to Jetty

  - by newbie

  I'm proxying request from nginx to Jetty, but I have problem with request that Jetty receives. Jetty requests shows that request IP address is 127.0.0.1. But I want real server IP and my site has multiple domains, so when request is coming from some domain name to my server, it must available in Jetty request too. nginx config: server { listen 80; ## listen for ipv4 listen [::]:80 default ipv6only=on; ## listen for ipv6 server_name localhost; access_log /var/log/nginx/localhost.access.log; location / { proxy_pass http://127.0.0.1:8080; proxy_set_header X-Real-IP $remote_addr; } } Servlet request: Dump Servlet getMethod: GET getContentLength: -1 getContentType: null getRequestURI: /dump/info getRequestURL: http://127.0.0.1:8080/dump/info getContextPath: getServletPath: /dump getPathInfo: /info getPathTranslated: /tmp/jetty-0.0.0.0-8080-test.war-_-any-/webapp/info getQueryString: null getProtocol: HTTP/1.0 getScheme: http getServerName: 127.0.0.1 getServerPort: 8080 getLocalName: 127.0.0.1 getLocalAddr: 127.0.0.1 getLocalPort: 8080 getRemoteUser: null getUserPrincipal: null getRemoteAddr: 127.0.0.1 getRemoteHost: 127.0.0.1 getRemotePort: 50905 getRequestedSessionId: 6ubs42zhm5q61k5hm84ni3ib isSecure(): false isUserInRole(admin): false getLocale: en_US getLocales: en_US getLocales: en

  Read the article

• Copy from CDROM is very slow in Ubuntu

  - by ???

  I'm using the command to copy CDROM image: # dd if=/dev/sr0 of=./maverick.iso But it's very slow, at about 350k bytes/sec. I've searched the google, and try the command # hdparm -vi /dev/sr0 /dev/sr0: HDIO_DRIVE_CMD(identify) failed: Bad address IO_support = 1 (32-bit) readonly = 0 (off) readahead = 256 (on) HDIO_GETGEO failed: Inappropriate ioctl for device Model=DVD-ROM UJDA775, FwRev=DA03, SerialNo= Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=unknown, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=yes, tPIO={min:180,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 AdvancedPM=no Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3: ATA/ATAPI-1,2,3,4,5 * signifies the current active mode Seems like DMA is already on. And a device test gives: # hdparm -t /dev/sr0 /dev/sr0: Timing buffered disk reads: 2 MB in 6.58 seconds = 311.10 kB/sec # sudo hdparm -tT /dev/sr0 /dev/sr0: Timing cached reads: 2 MB in 2.69 seconds = 760.96 kB/sec Timing buffered disk reads: m 4 MB in 5.19 seconds = 789.09 kB/sec The CD-ROM device and disc should be okay because I can copy it very fast in Windows, using UltraISO utility. So I guess there is something not configured right in Ubuntu, is it?

  Read the article

• VirtualBox problems writing to shared folders (Guest Additions installed)

  - by vincent

  I am trying to setup a shared folder from the host (ubuntu 10.10) to mount on a virtualized CentOS 5.5 with Guest Additions (4.0.0) installed (Guest addition features are working ie. seamless mode etc.). I am able to successfully mount the share with: mount -t vboxsf -o rw,exec,uid=48,gid=48 sf_html /var/www/html/ (uid and guid belong to the apache user/group) the only problem is that once mounted and I try to write/create directories and files I get the following: mkdir: cannot create directory `/var/www/html/test': Protocol error I am using the proprietary version of VirtualBox version 4.0.0 r69151. Has anyone had the same problem and been able to fix it or has any idea how to potentially fix this? Another question, the reason for setting this up is this. Our production servers are on CentOS 5.5 however I am a great fan of Ubuntu and would like to develop on Ubuntu rather than CentOS. However in order to stay as close to the production environment I would like to virtualize CentOS to use a web server and use the shared folder as web root. Anyone know whether this isn't a good idea? Has anyone successfully been able to set this up? Thanks guys, your help is always much appreciated and if you need any more information please let me know.

  Read the article

• Issues with creating a snapshot

  - by Andy Welcomer

  Hello everyone, We have a strange issue when attempting to create a snapshot in one of our regional environments. We have 4 VMs, 2 of them have mulitple VMDKs spread onto different datastores. When a snapshot is created, all the VMDKs (except for the first), seem to vanish. If you look at the properties of the VM, the path to the VMDKS points to the datastore where the primary VMDK is, and the file name is some random garbage. If the snapshot is deleted everything returns to normal. Has anyone ever seen this? I'm using ESX3.5 Thank you in advance. Andy ==============UPDATE============== Here is some more information. I just created a test machine with 7 VMDKs. 1 for the OS. and 6 others for data. All of the VMDKs are in seperate datastores. I take a snapshot of the machine, all of the 6 VMDKs loose their reference to the actual VMDK files. The all point to 64KB VMDK files in the datastore where the OS VMDK is located. These 64KB vmdks didn't exist until the snapshot was taken. When the snapshot is deleted, everything goes back to normal.

  Read the article

• Is Subversion(SVN) supported on Ubuntu 10.04 LTS 32bit?

  - by Chad

  I've setup subversion on Ubuntu 10.04, but can't get authentication to work. I believe all my config files are setup correctly, However I keep getting prompted for credentials on a SVN CHECKOUT. Like there is an issue with apache2 talking to svnserve. If I allow anonymous access checkout works fine. Does anybody know if there is a known issue with subversion and 10.04 or see a error in my configuration? below is my configuration: # fresh install of Ubuntu 10.04 LTS 32bit sudo apt-get install apache2 apache2-utils -y sudo apt-get install subversion libapache2-svn subversion-tools -y sudo mkdir /svn sudo svnadmin create /svn/DataTeam sudo svnadmin create /svn/ReportingTeam #Setup the svn config file sudo vi /etc/apache2/mods-available/dav_svn.conf #replace file with the following. <Location /svn> DAV svn SVNParentPath /svn/ AuthType Basic AuthName "Subversion Server" AuthUserFile /etc/apache2/dav_svn.passwd Require valid-user AuthzSVNAccessFile /etc/apache2/svn_acl </Location> sudo touch /etc/apache2/svn_acl #replace file with the following. [groups] dba_group = tom, jerry report_group = tom [DataTeam:/] @dba_group = rw [ReportingTeam:/] @report_group = rw #Start/Stop subversion automatically sudo /etc/init.d/apache2 restart cd /etc/init.d/ sudo touch subversion sudo cat 'svnserve -d -r /svn' > svnserve sudo cat '/etc/init.d/apache2 restart' >> svnserve sudo chmod +x svnserve sudo update-rc.d svnserve defaults #Add svn users sudo htpasswd -cpb /etc/apache2/dav_svn.passwd tom tom sudo htpasswd -pb /etc/apache2/dav_svn.passwd jerry jerry #Test by performing a checkout sudo svnserve -d -r /svn sudo /etc/init.d/apache2 restart svn checkout http://127.0.0.1/svn/DataTeam /tmp/DataTeam

  Read the article

• Successful login with iscsiadm on target still doesn't create block device

  - by Halfgaar

  I've set up an experiment to test iscsitarget and initiator, which at some point worked. Later, I turned the setup back on and much to my dismay, the initiator machine stopped making block devices for its successful logins. As far as I know, I haven't changed anything on either machine. Some details: # iscsiadm -m node --login Logging in to [iface: default, target: iqn.2010-12.nl.ytec.arbiter:arbiter.lun1, portal: 10.0.0.1,3260] Logging in to [iface: default, target: iqn.2010-12.nl.ytec.arbiter:arbiter.lun2, portal: 10.0.0.1,3260] Login to [iface: default, target: iqn.2010-12.nl.ytec.arbiter:arbiter.lun1, portal: 10.0.0.1,3260]: successful Login to [iface: default, target: iqn.2010-12.nl.ytec.arbiter:arbiter.lun2, portal: 10.0.0.1,3260]: successful Sessions: # iscsiadm -m session tcp: [3] 10.0.0.1:3260,1 iqn.2010-12.nl.ytec.arbiter:arbiter.lun1 tcp: [4] 10.0.0.1:3260,1 iqn.2010-12.nl.ytec.arbiter:arbiter.lun2 Netstat: # netstat -n -p|grep 3260 tcp 0 0 10.0.0.2:48719 10.0.0.1:3260 ESTABLISHED 1078/iscsid tcp 0 0 10.0.0.2:48718 10.0.0.1:3260 ESTABLISHED 1078/iscsid /var/log/syslog doesn't give errors: Jan 27 11:41:49 vmnode001 kernel: [ 378.041749] scsi7 : iSCSI Initiator over TCP/IP Jan 27 11:41:49 vmnode001 kernel: [ 378.044180] scsi8 : iSCSI Initiator over TCP/IP lsscsi doesn't show my devices: [0:0:1:0] cd/dvd TSSTcorp DVD-ROM TS-L333A D100 /dev/sr0 [4:0:0:0] disk ATA Hitachi HUA72105 A74A - [4:0:1:0] disk ATA Hitachi HUA72105 A74A - [4:1:0:0] disk Dell VIRTUAL DISK 1028 /dev/sda And there are no block devices in /dev for it: # ls -1 /dev/sd* /dev/sda /dev/sda1 /dev/sda2 /dev/sda3 /dev/sda4 I tried loading all scsi kernel modules I could find, but that doesn't seem to be the problem. I reall don't get this; it used to work. I found people with similar problems (here and here) but no solution. Initiator is Debian Sqeeuze (testing), target is Debian Lenny (stable). iscsitarget is 0.4.16+svn162-3.1+lenny1, open-iscsi (initiator) is 2.0.871.3-2squeeze1. Target kernel: 2.6.26-2-amd64, initiator kernel: 2.6.32-5-amd64

  Read the article

• Make isolinux 4.0.3 chainload itself

  - by chainloader

  I have a bootable iso which boots into isolinux 4.0.3 and I want to make it chainload itself (my actual goal is to chainload isolinux.bin v4.0.1-debian, which should start up the Ubuntu10.10 Live CD, but for now I just want to make it chainload itself). I can't get isolinux to chainload any isolinux.bin, no matter what version. It either freezes or shows a "checksum error" message. I'm using VMWare to test the iso. Things I have tried: .com32 /boot/isolinux/chain.c32 /boot/isolinux/isolinux-debug.bin (chainload self) this shows Loading the boot file... Booting... ISOLINUX 4.03 2010-10-22 Copyright (C) 1994-2010 H. Peter Anvin et al isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: Main image LBA = 53F00100 ...and the machine freezes. Then I've tried this (chainload GRUB4DOS 0.4.5b) chainloader /boot/isolinux/isolinux-debug.bin Result: Error 13: Invalid or unsupported executable format Next try: (chainload GRUB4DOS 0.4.5b) chainloader --force /boot/isolinux/isolinux-debug.bin boot Result: ISOLINUX 4.03 2010-10-22 Copyright (C) 1994-2010 H. Peter Anvin et al isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: No boot info table, assuming single session disk... isolinux: Spec packet missing LBA information, trying to wing it... isolinux: Main image LBA = 00000686 isolinux: Image checksum error, sorry... Boot failed: press a key to retry... I have tried other things, but all of them failed miserably. Any suggestions?

  Read the article

• Load balancing a Windows File Share using HA-Proxy

  - by NathanE

  After pulling my hair out over DFS I just had this weird and potentially dangerous idea come into my head whereby, just possibly, I might be able to use HA-Proxy to load balance a file share between servers. I've done some remedial packet traces and it does appear that TCP port 445 is the only thing involved in using Windows file sharing. I've always thought for many years that UDP 139, 135 etc were also involved in at least establishing the connection - but apparently not! So I setup a basic test: listen SMBTest *:445 mode tcp server Smb1 172.16.61.201:445 server Smb2 172.16.61.202:445 And you'll never guess what... it works??? (!) Now obviously there is the whole concern about synchronisation between the file servers (of course). That could easily be taken care of with a little bit of Robocopy script. And considering I only need a HA read-only file share there wouldn't be any issues with regard to file locking etc. Can anyone tell me if what I'm playing with here is fire? I really didn't think it would work at all and now I'm a little shocked. What would be the downsides? Could this be relied upon for a production environment?

  Read the article

• Looking for recommendations on OCR problem - tabular numeric data

  - by ldigas

  I have 20 pages of experiment measurement data which I need to digitalize. The results are in tabular form, scanned in 600 dpi resolution, and as far as scans go, they came up pretty clean and readable. For an example of how it looks see here (but beware: it is a rather big scan; about 5Mb; no problem for any broadband connection, but dialups should approach with caution!) ... and I need it finished by sunday afternoon (:-o) <-- smiley in a state of panic (then why did't you start sooner?)... yea, yeah ... I know ... but, it came up late, and I wasn't thinking I was gonna need this data also. So, I'm looking for recommendations. I haven't much experience with OCR programs, save scanning a page or two of pure text, but just to mention, I haven't the wish also to test out every OCR program out there. So this isn't a "name your OCR favourite". What I'm looking is advice from someone who's done something like that, and his/hers experience on what would be the best way to undertake. I need the data in txt form but since it will have to be checked (by drawing it, and just simply watching whether some points "jump out") I'll probably be entering it in Excel at first.

  Read the article

• Cannot connect to Solaris Server when Oracle GoldenGate process uses the port

  - by Abdallah Ghrb

  I'm trying to test the Oracle goldengate to replicate data between two databases on the same server. So I installed two databases and two goldengate homes in the same machine. The goldengate processes are started from each home and they are responsible for the replication : Process from home 1 configured on port 7809 & process for home 2 configured on port 7810. For a successful replication, processes started from goldengate home 1 should communicate with processes started from goldengate home 2. But for some reasons, this is not happening. The goldengate log file has the following error : OGG-01223 Oracle GoldenGate Capture for Oracle, exthrr.prm: TCP/IP error 131 (Connection reset by peer). "Googling" for this error, it said that the connection occurred but the host terminated it. Tried to telnet the machine with the used port and it gave the following error: bash-3.00$ telnet 10.10.3.124 7810 Trying 10.10.3.124... Connected to 10.10.3.124. Escape character is '^]'. Connection to 10.10.3.124 closed by foreign host. Here the communication occurs but for only around 3 seconds then it is closed by the host, which is the same explanation of the above error in the goldengate log file. I tried to change the port but still the same error. The problem is happening only when the goldengate process is using the port. When other process is using the same port, I can telnet successfully.

  Read the article

• Windows 8 Internet Explorer proxy automation script

  - by Stefan Bollmann

  Similar to this post, I'd like to change my proxy settings using a script. However, it fails. When I am behind the proxy, IE does not connect to the internet. Here I try the first solution from craig: function FindProxyForURL(url, host) { if (isInNet(myIpAddress(), "myactualip", "myactualsubnetip")) return "PROXY proxyasshowninpicture:portihavetouseforthisproxy_see_picture"; else return "DIRECT"; } Also this test, where isInNet should surely return true does not help: function FindProxyForURL(url, host) { if (isInNet("myactualip", "myactualip", "myactualsubnetip")) return "PROXY proxyasshowninpicture:portihavetouseforthisproxy_see_picture"; else return "DIRECT"; } **This script is saved as proxy.pac in c:\windows and my configuration is* in LAN settings: No automatically detected settings, yes, use automatic config script: file://c:/windows/proxy.pac No proxy server. *(i am not allowed to post screenshots..) So, what am I doing wrong? ---------------- update -------------- However, when I set up a proxy in my LAN configurations: IE -> Internet Options -> Connections -> LAN Settings check: Use a proxy Server for your LAN Address: <a pingable proxy> Port: <portnr> everything is fine for this environment. Now I try a simpler script like function FindProxyForURL(url, host) { return "PROXY <pingable proxy>:<portnr>; DIRECT"; } With a configuration described above** I am not able to get through the proxy.

  Read the article

• Using Confluence with virtual hosts and mod_proxy

  - by Marcus

  Hi @all, on a test server I have installed the latest version of Confluence. I configured a apache with ajp. But I have a problem, when I login in Confluence, I get the following error message: Not Found The requested URL / / homepage.action was not found on this server. The problem seems to be known, I found following Link: http://confluence.atlassian.com/display/DOC/Using+Apache+with+virtual+hosts+and+mod_proxy But unfortunately the forwards have not helped, I still get the error messages. Does anyone have any idea how I could solve the problem? The following Apache configuration I have set up: LoadModule proxy_module /usr/lib/apache2/modules/mod_proxy.so LoadModule proxy_http_module /usr/lib/apache2/modules/mod_proxy_http.so LoadModule proxy_ajp_module /usr/lib/apache2/modules/mod_proxy_ajp.so <IfModule proxy_http_module> ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> <Location /> Order allow,deny Allow from all </Location> ProxyPass / http://localhost:8080/ ProxyPassReverse / http://localhost:8080/ </IfModule>

  Read the article

• virtual disk image - file or partition

  - by tylerl

  I'm looking at the differences between using a file versus a partition to store a virtual disk image in VM use. The common knowledge is that partition-based images are faster than file-based images because of a decreased overhead. It makes sense, but I've never seen any actual numbers. My own testing bears out a different result. When I benchmark a direct-to-partition virtual disk, then format that same partition with ext4, create a virtual disk image stored on that ext4 filesystem, and then benchmark that, I see no speedup at all for the direct-to-partition virtual disk. Instead on some systems the file-based image is even faster (possibly due to host OS caching or something like that). This test was repeated many times on many systems, with fairly consistent results. So perhaps throwing out the performance justification, is it still considered better to use a partition rather than a virtual disk image? Is there some other reason why direct partition access is better than image files? Or perhaps is there some reason to go the other way around? Perhaps an advantage in one of the virtual disk file formats that you don't get with raw partition images?

  Read the article

• CUPS causes printer to click and doesn't print

  - by Pez Cuckow

  I'm suffering a strange problem with my Cannon iP4850 when trying to use CUPS on a Raspberry Pi (this is not RPi specific, please do not vote to move it). When I plug the printer into my Laptop (OSX) or my Desktop W7 it identifies as a iP4800 and prints perfectly. So I plug it into the Pi (running debian), set it up in CUPS enable sharing and can now see the iP4800 series shared on the network. However if I print to it (using AirPrint etc...); the file gets to CUPS safely (shows in the queue) but when it tries to print the printer clicks (like a loud thunk) 3/4 times and then gives in, with a double amber flashing light. In cups it shows as job completed. Do you know why using the pi and cups would cause what appears to be a hardware fault and what I can do to fix the problem or to provide further debug info? Thanks for your time! Description: Canon iP4800 series Location: Lounge Driver: Canon PIXMA iP4800 - CUPS+Gutenprint v5.2.9 (color, 2-sided printing) Connection: usb://Canon/iP4800%20series?serial=2239B2 Note: I've tried deleting and re-adding the printer to the Laptop, Desktop and PI and the results are always the same Log for plugging in printer and printing (attempting to) something until the printer turned off again pi@pezpi /var/log $ dmesg [ 7284.176336] usb 1-1.2: new high speed USB device number 8 using dwc_otg [ 7284.279703] usb 1-1.2: New USB device found, idVendor=04a9, idProduct=10d5 [ 7284.279750] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7284.279771] usb 1-1.2: Product: iP4800 series [ 7284.279786] usb 1-1.2: Manufacturer: Canon [ 7284.279800] usb 1-1.2: SerialNumber: 2239B2 Setting cups to verbose: Change loglevel in cupsd.conf to debug (or debug2) pi@pezpi /var/log $ sudo vim /etc/cups/cupsd.conf pi@pezpi /var/log $ sudo /etc/init.d/cups restart [ ok ] Restarting Common Unix Printing System: cupsd. pi@pezpi /var/log $ Log from $ /var/log/cups/error_log is at http://pastebin.com/7VZMRMrG (too large to post here) The log contains - in order (deleted the log and then did the beneath) Restarting the cups server Attempting to print a test page x2 Printing from 192.168.1.90 via AirPrint Printing from 192.168.1.90 via Network Print Turning the printer off and on again

  Read the article

• Recovering a damaged microSDHC

  - by djechelon

  I just bought from eBay a Kingston 32GB microSDHC that was advertised as defective. The seller said that there could be formatting problems or with transfer of large files. Unfortunately, when I got it, it was a total mess. My Nikon camera doesn't read it at all (OK, maybe it doesn't support 32GB) My Linux laptop doesn't mount it: can't read superblock The same laptop refuses to mkfs.msdos because it failed whilst writing reserved sector The same laptop, under Windows, doesn't read nor format the card HTC HD2 mounts the MMC, allows me to write via USB, but is unable to open the just written files OK, folks, now you would say I would have to go through Paypal complaint... that's not that easy. I consciously bought a half-price card that was known to show some defects, and Paypal complaints take time. Obviously, I can't accept somebody sold me a completely use-less computer decoration. So I'll keep it as last option. My question is Do you know a way, under either Linux or Windows, to thoroughly scan, test and possibly repair memory cards, even if I have to lose some percentage of space because of bad sectors? If I can keep at least half of the card intact it would certainly be fine. I used to do broken sector marking with hard disks in the past. I almost forgot: MONSTR:/home/djechelon # fsck /dev/mmcblk0p1 fsck from util-linux-ng 2.17.2 dosfsck 3.0.9, 31 Jan 2010, FAT32, LFN Read 512 bytes at 0:Input/output error

  Read the article

• How to make ssh connection between servers using public-key authentication

  - by Rafael

  I am setting up a continuos integration(CI) server and a test web server. I would like that CI server would access web server with public key authentication. In the web server I have created an user and generated the keys sudo useradd -d /var/www/user -m user sudo passwd user sudo su user ssh-keygen -t rsa Generating public/private rsa key pair. Enter file in which to save the key (/var/www/user/.ssh/id_rsa): Created directory '/var/www/user/.ssh'. Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /var/www/user/.ssh/id_rsa. Your public key has been saved in /var/www/user/.ssh/id_rsa.pub. However othe side, CI server copies the key to the host but still asks password ssh-copy-id -i ~/.ssh/id_rsa.pub user@webserver-address user@webserver-address's password: Now try logging into the machine, with "ssh 'user@webserver-address'", and check in: .ssh/authorized_keys to make sure we haven't added extra keys that you weren't expecting. I checked on the web server and the CI server public key has been copied to web server authorized_keys but when I connect, It asks password. ssh 'user@webserver-address' user@webserver-address's password: If I try use root user rather than my created user (both users are with copied public keys). It connects with the public key ssh 'root@webserver-address' Welcome to Ubuntu 11.04 (GNU/Linux 2.6.18-274.7.1.el5.028stab095.1 x86_64) * Documentation: https://help.ubuntu.com/ Last login: Wed Apr 11 10:21:13 2012 from ******* root@webserver-address:~#

  Read the article

• Intel NIC X540-T1 non-functional in Ubuntu Server 12.04

  - by Jeff Carr

  I have installed three Intel X540-T1's in servers running Ubuntu Server 12.04, but all are non-functional, no link lights, no packets sent or received, and no connection on ip4 or ip6 whether set up as dhcp or static. Also, dmesg doesn't detect cable connection or disconnection. I updated the default ixgbe driver to Intel's latest version (3.11.33) with no change. The ethernet controller is being reported as X540-AT2 (which might be a problem that I can't figure out how to fix), but the subsystem is X540-T1 so I believe that might be intended. Does anyone have any experience with this that could assist? ifconfig eth2 eth2 Link encap:Ethernet HWaddr a0:36:9f:14:5f:ea inet addr:192.168.101.1 Bcast:192.168.101.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1<br> RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ethtool -i eth2 driver: ixgbe version: 3.11.33 firmware-version: 0x8000037c bus-info: 0000:08:00.0 supports-statistics: yes supports-test: yes supports-eeprom-access: yes supports-register-dump: yes lspci -vvnns 08:00.0 08:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller 10 Gigabit X540-AT2 [8086:1528] (rev 01) Subsystem: Intel Corporation Ethernet Converged Network Adapter X540-T1 [8086:0002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e8000000 (64-bit, prefetchable) [size=2M] Region 4: Memory at e8200000 (64-bit, prefetchable) [size=16K] [virtual] Expansion ROM at e8280000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: ixgbe Kernel modules: ixgbe

  Read the article

• Error regarding DNS - "... must be able to resolve names ..." (Windows Server 2008 R2 installation)

  - by Scolytus

  I'm trying to replace our old Windows 2000 Server by a Windows Server 2008 R2. I followed the guide at MSDN. Coming to the step "Install Active Directory Domain Services..." the option to install the DNS-Server was grayed-out. According to Microsoft Support I skipped the DNS Server Installation at this point. (Because of the single-label DNS name) I then installed the DNS-Server role and created a forward-lookup-zone for the domain. When running the Best Practices Analyzer of the DNS-Server role I get these two messages for both domain controllers (the old win2k and the new win 2008 R2): The DNS server [IP address] on [adapter name] must be able to resolve names in the primary DNS domain zone The DNS server [IP address] on [adapter name] must be able to resolve names in the forest root domain name zone The TechCenter articles suggest to use a proper DNS Server - that's pointless when I try to configure a proper DNS Server. How do I configure the DNS Server in a way that it resolves these zones? Or are these errors irrelevant? dcdiag /v /test:DNS Seems to run fine...

  Read the article

< Previous Page | 793 794 795 796 797 798 799 800 801 802 803 804  | Next Page >