Search Results

Search found 11155 results on 447 pages for 'disk sleep'.

Page 8/447 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• Win 8: Adding a boot volume to an MBR dynamic disk [NOT about changing to basic disks]

  - by Stilez

  (This is NOT aiming to convert to basic disk. In this question, the disk stays dynamic but becomes bootable) There doesn't seem to be a clear, well stated answer I can find, for the question "What are the criteria for Windows 8 to successfully boot from an MBR dynamic disk", or "how do I fix a dynamic MBR partition that's failing boot"? I've tried to educate myself but can't find crucial information to clear it all up. My existing HDD/SSD setup: DISK 0 ~ 60GB SSD/MBR/basic: (350MB recovery)(60GB windows 8 bootable) DISK 1 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB unallocated)(410GB mirrored data) DISK 2 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB unallocated)(410GB mirrored data) DISKS 3, 4, 5: (ignored for simplicity: 2xHDD RAID1 + caching SSD) I'm heavy duty on data crunching and virtualisation, just maxxed out 32GB RAM @ 2133 and moved to 4960X + 64GB. Disk 0 is a pure system disk of little value, and virtualisations runs off mirrored SSDs (Samsung 840 Pro 512 x 2) for double speed reading and so they snapshot in reasonable time. I'm using 4 SATA3 ports and the board only has two decent Intel ports (onboard Marvell are poorer quality). I'm wary of choosing between LSI, HighPoint and other 3rd party controllers as I'm unfamiliar with the maze of decent RAID cards (that's a whole other issue!). I want to cut down my SSD needs by moving the boot volume and caching volume to the 840 pros, giving a setup with 2 fewer SSDs: DISK 0 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(60GB boot)(410GB mirrored data) DISK 1 ~ 512GB SSD/MBR/dynamic: (350MB recovery)(30GB cache for the ICH10R mirror)(30GB temp)(410GB mirrored data) DISKS 2, 3: (2xHDD RAID1) Intel's RST allows this, Win 8 allows booting off a MBR/dynamic disk, and the two 60GB SSDs are hardly the fastest SSDs anyway, they'll get repurposed. Moving the caching volume is easy. Moving the boot volume has me stumped. The difficulty is, I'm hitting a wall of knowledge here. I have a UEFI Asus motherboard with an previous traditional MBR/basic boot disk, and I want it to boot from a disk and volume that's MBR/dynamic. The disk copy is physically ok (Partition Wizard Server will copy to dynamic volumes) but then hits a light blue 0xc000000e boot error. No real surprise, I expected to have some boot fixing, but had expected Windows to boot-fix it (all drivers exist), or the usual manual fixes to work. Specifically, I don't know enough, to know what's got to be manually checked and perhaps corrected for the disk to boot (legacy/uefi/bios, odd partitions, boot tables, disk IDs, hidden boot files, oh my!), or if I need to change any of this secure boot/UEFI/legacy stuff in the bios, convert a 512 SSD to basic and then back to dynamic when working, or if the issue is pure OS config using "diskpart", "bootsect" and "bootrec" from the Win8 DVD. The old system disk still boots but I don't know enough to figure what to fix, to make the system boot as I want. The answers probably aren't hard but the real issue is my confusion and missing information. Thanks for helping!

  Read the article

• Add a Sleep Timer to Windows 7 Media Center

  - by DigitalGeekery

  Do you make it a habit of falling asleep at night while watching Windows Media Center? Today we are going to take a look at the MC7 Sleep Timer for Windows 7 Media Center. This simple little plugin allows you to schedule an automatic shutdown time in Media Center. Note: At this point MC7 Sleep Timer doesn’t work with extenders. If you’re using ClamAV or Panda it may detect this plugin as a virus, we’ve tested it and this is a false positive for these two antivirus apps. Installation and Usage Download and install MC7 Sleep Timer. (See download below) After the installation is finished, you will find MC7 Sleep Timer located in the Media Center Extras Library. Click on the tile to open the timer and configure your settings. The MC7 Sleep Timer will open in full screen mode. You can choose to shutdown the PC after 30 or 60 minutes, create a custom length shutdown timer at any 5 minute interval, or select the exact time you want the PC to shutdown.  After setting your PC to shutdown, you’ll get an audio confirmation. To set a custom timer length, scroll to the “Custom timer” option and click right or left on your Media Center remote or, the right or left arrow keys, to choose how many minutes before shutdown. To schedule a shutdown for a certain time, browse to the “Shutdown at time” button, and scroll right or left with the arrow keys on the keyboard or remote. When you’ve chosen your time, hit “Enter” on the keyboard or “OK” on the remote.   Clicking the “Monitor Off” button will turn off only the monitor and “Cancel Timer” will cancel your shutdown request. Conclusion If you often find yourself falling asleep every night watching Media Center and then fumbling and stumbling in the middle of the night to shutdown your computer, MC7 Sleep timer might just be a perfect addition to your Media Center setup. Download MC7 Sleep Timer Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Re-Enable Sleep Mode in Windows VistaSchedule Updates for Windows Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7Add Color Coding to Windows 7 Media Center Program Guide TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Use My TextTools to Edit and Organize Text Discovery Channel LIFE Theme (Win7) Increase the size of Taskbar Previews (Win 7) Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor

  Read the article

• Sleep – Why We Need It and What Happens Without It

  - by Akemi Iwaya

  We spend approximately one-third of our lives sleeping, but why do our bodies need sleep? What is happening in our brains and bodies during our awake and sleeping periods? Could we get by with little to no sleep? Learn the answers to these questions and more with SciShow’s information-packed video about sleep! Sleep: Why We Need It and What Happens Without It [YouTube]     

  Read the article

• Hard disk with bad clusters

  - by Dan

  I have been trying to backup some files up to DVD recently, and the burn process failed saying the CRC check failed for certain files. I then tried to browse to these files in Windows explorer and my whole machine locks up and I have to reboot. I ran check disk without the '/F /R' arguments and it told me I had bad sectors. So I re-ran it with the arguments and check disk fails during the 'Chkdsk is verifying usn journal' stage with this error: Insufficient disk space to fix the usn journal $j data stream The hard disk is a 300GB Partition on a 400GB Disk, and there is 160GBs of free space on the partition. My os (Windows 7) is installed on the other partition and is running fine. Any idea how I fix this? or repair it enough to copy my files off it?

  Read the article

• Cloning single disk drive to multiple drives simultaneously

  - by mr.b

  Hi, I am looking for a way to clone single disk drive to more than one disk drive at the same time. I have prepared system images on 1TB disks, and it takes almost 2 hours to clone one disk to another, and then it goes up exponentially, in order to have say 30 disks cloned. If it was possible to clone one disk to more than single target, it would simplify whole procedure a lot. Also, is there something that prevents this kind of operation? I mean, is there some special reason why every disk cloning software that I know about supports only single target drive? Thanks! P.S. This question is cross-post from superuser, I hope nobody minds.

  Read the article

• zeroing a disk with dd vs Disk Utility

  - by jdizzle

  I'm attempting to zero a disk on my Mac OS X machine. I'm going for complete zeros and unformatted, so I think of dd. Unfortunately the maximum throughput I've managed to get out of dd is 7MB/s. Just for grins I tried disk utility and it has a throughput of 19MB/s. What gives? I've tried changing the bs option on dd to all sorts of values, but it still hovers around 7MB/s. Why is disk utility so much faster?

  Read the article

• How to limit disk performance?

  - by DrakeES

  I am load-testing a web application and studying the impact of some config tweaks (related to disk i/o) on the overall app performance, i.e. the amount of users that can be handled simultaneously. But the problem is that I hit 100% CPU before I can see any effect of the disk-related config settings. I am therefore wondering if there is a way I could deliberately limit the disk performance so that it becomes the bottleneck and the tweaks I am trying to play with actually start impacting performance. Should I just make the hard disk busy with something else? What would serve the best for this purpose? More details (probably irrelevant, but anyway): PHP/Magento/Apache, studying the impact of apc.stat. Setting it to 0 makes APC not checking PHP scripts for modification which should increase performance where disk is the bottleneck. Using JMeter for benchmarking.

  Read the article

• Beginners advice on Small business network disk(s)

  - by Rob

  We are having 10 PCs used by various user and presently use one network disk (a LaCie NAS) for all our data. Everything is Windows Vista and our collective IT hardware knowledge is minimal. This worked well generally. However, recently the disk freqently loses connection from the network (2-3 times per week) and the only way back seems to be the "turn it off and back on" trick. This obviously cant be any good for the disk. I understand that there are various more sophisticated ways of storing data and was wondering what people would recommend. One of the worries is obviously disk failure (either in part or as a whole) and the lack of continued availability due to network issues. I would guess that a disk which replicates data wouldnt work as a sole solution due to the network connection, but dont know what hardware (and/or software) would/could work in our case. In terms of size, we are looking at very small amounts, ie. less than 500 GB in total.

  Read the article

• virtualbox 2 vmware disk

  - by anol

  I have a virtualbox disk I'd like to convert to a vmware disk. The disk is dynamic which makes it a lot more trickier. If I follow the instructions at http://xpapad.wordpress.com/2010/02/21/migrating-from-virtualbox-to-vmware-in-linux, the vdi-to-raw conversion will result in a 2 TB file. I don't even have that much disk space! The first step therefore seems to be a dynamic to static conversion of the virtualbox disk, right? How do I do that or is there perhaps a better way to convert to vmware? Help!

  Read the article

• centos 100% disk full - How to remove log files, history, etc?

  - by kopeklan

  mysqld won't start because disk space is full: 101221 14:06:50 [ERROR] /usr/libexec/mysqld: Error writing file '/var/run/mysqld/mysqld.pid' (Errcode: 28) 101221 14:06:50 [ERROR] Can't start server: can't create PID file: No space left on device running df -h: Filesystem Size Used Avail Use% Mounted on /dev/sda2 16G 3.2G 12G 23% / /dev/sda5 4.8G 4.6G 0 100% /var /dev/sda3 430G 855M 407G 1% /home /dev/sda1 76M 24M 49M 33% /boot tmpfs 956M 0 956M 0% /dev/shm du -sh * in /var: 12K account 56M cache 24K db 32K empty 8.0K games 1.5G lib 8.0K local 32K lock 221M log 16K lost+found 0 mail 24K named 8.0K nis 8.0K opt 8.0K preserve 8.0K racoon 292K run 70M spool 8.0K tmp 76K webmin 2.6G www 20K yp in /dev/sda5, there is website files in /var/www. because this is first time, I have no idea which files to remove other than moving /var/www to other partition And one more, what is the right way to remove log files, history, etc in /dev/sda5?

  Read the article

• Possible disk IO issue

  - by Tim Meers

  I've been trying to really figure out what my IOPS are on my DB server array and see if it's just too much. The array is four 72.6gb 15k rpm drives in RAID 5. To calculate IOPS for RAID 5 the following formula is used: (reads + (4 * Writes)) / Number of disks = total IOPS. The formula is from MSDN. I also want to calculate the Avg Queue Length but I'm not sure where they are getting the formula from, but i think it reads on that page as avg que length/number of disks = actual queue. To populate that formula I used the perfmon to gather the needed information. I came up with this, under normal production load: (873.982 + (4 * 28.999)) / 4 = 247.495. Also the disk queue lengh of 14.454/4 = 3.614. So to the question, am I wrong in thinking this array has a very high disk IO? Edit I got the chance to review it again this morning under normal/high load. This time with even bigger numbers and IOPS in excess of 600 for about 5 minutes then it died down again. But I also took a look at the Avg sec/Transfer, %Disk Time, and %Idle Time. These number were taken when the reads/writes per sec were only 332.997/17.999 respectively. %Disk Time: 219.436 %Idle Time: 0.300 Avg Disk Queue Length: 2.194 Avg Disk sec/Transfer: 0.006 Pages/sec: 2927.802 % Processor Time: 21.877 Edit (again) Looks like I have that issue solved. Thanks for the help. Also for a pretty slick parser I found this: http://pal.codeplex.com/ It works pretty well for breaking down the data into something usable.

  Read the article

• Disk (EXT4) suddenly empty without any sign of why

  - by Ohnomydisk

  I have a Ubuntu 10.04 server with several disks in it. The disks are setup with a union filesystem, which presents them all as one logical /home. A few days ago, one of the disks appears to have suddenly 'become empty', for lack of better explanation. The amount of data on the /home mount almost halved within minutes - the disk appears to have had just over 400 GB of data prior to 'becoming empty'. I have absolutely no idea what happened. I was not using the server at the other time, but there are half a dozen other users who may have been (without root access and without the ability to hose a whole disk). I've ran SMART tests on the disk and it comes back clean. The filesystem checks fine (it has 12 GB used now, as some user software continued downloading after the incident). All I know is that around around midnight on October 19, the disk usage changed dramatically: The data points are every 15 minutes, and the full loss occured between captures: 2012-10-18 23:58:03.399647 - has 953.97/2059.07 GB [46.33 percent] 2012-10-19 00:13:15.909010 - has 515.18/2059.07 GB [25.02 percent] Other than that, I have not much to go off :-( I know that: There's nothing interesting in log files at that time Nobody appeared to be logged in via SSH at the time it occured (most users do not even use SSH) The server was online through whatever occured (3 months uptime) None of the other disks were affected and everything else on the server looks completely normal I have tried using "extundelete" on the disk and it didn't really find anything (some temporary files, but they looked new anyway) I am completely at a loss to what could have caused this. I was initially thinking maybe root escalation exploit, but even if someone did maliciously "rm" the disk contents, it would take more than 15 minutes for 400 GB?

  Read the article

• Windows only successfully wakes up from sleep mode about 2/3rds of the time.

  - by Macha

  On my Vista laptop, when it goes into sleep mode (for low power, or manually being put into sleep mode, it happens regardless of how), about 1 in 3 times it won't wake up properly from sleep mode, and just display a black screen. The only option is to hold the power button to turn it off by holding the power button, and turning it back on again. (And yes, I have moved the mouse, pressed keyboard buttons and stuff).

  Read the article

• How can I figure out exactly which process is keeping my Mac from going to sleep and waking it up?

  - by pattern86

  I have read this knowledgebase article, but would like to know if there's a way to tell exactly which process is causing my Mac not to follow the sleep schedule I have set in System Preferences Energy Saver. I have narrowed it down to a being a process and will explain why I think so (see below). I am running OS X (10.6.5) on the new iMac 27" and I am certain it's not the following: The "Wake for Network Access" checkbox in Energy Saver settings (has never been a previous issue) Peripherals (has never been a previous issue) Any active GUI application (all are closed) Additional USB/FireWire drives (none are connected) Bluetooth (it's off) Sharing services (has never been a previous issue) The symptoms are as follows: The computer doesn't go to sleep at the predetermined time. It will wake up some number of hours after being put manually to sleep (but not within the first few seconds/minutes.) Is there a specific string I should be looking for in Console? I have tried searching for "wake" and "sleep" but can't make total sense of the results.

  Read the article

• MegaCli newly created disk doesn't appear under /dev/sdX

  - by Henry-Nicolas Tourneur

  After having successfully added 2 new disks in a new RAID virtual drive (background initialization done), I would have exepected it to appear under /dev/sdh but it's not there (so, unusable). The system is running a CentOS 5.2 64 bits, HAL and udev daemons are running, not records of any sdh apparition under the messsage log file or in dmesg, only MegaCli do see that virtual drive. Any idea ? Some data: [root@server ~]# ./MegaCli -LDInfo -LALL -a0 Adapter 0 -- Virtual Drive Information: Virtual Disk: 0 (target id: 0) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:139392MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:1 Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Virtual Disk: 1 (target id: 1) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:285568MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:1 Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default [root@server ~]# ls -l /dev/disk/by-id/scsi-360* lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09 -> ../../sda lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09-part1 -> ../../sda1 lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09-part2 -> ../../sda2 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe07e78f94940c0000a0ee -> ../../sdf lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe07e78f94940c0000a0ee-part1 -> ../../sdf1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe972a3f91240a0000005f -> ../../sdb lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe972a3f91240a0000005f-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fea7e18f94640c000020ec -> ../../sde lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fea7e18f94640c000020ec-part1 -> ../../sde1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0feb7da8f94340c0000203d -> ../../sdd lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0feb7da8f94340c0000203d-part1 -> ../../sdd1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fed7d78f94040c000080b7 -> ../../sdc lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fed7d78f94040c000080b7-part1 -> ../../sdc1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a05830145e58e0b9c479000010a1 -> ../../sdg lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a05830145e58e0b9c479000010a1-part1 -> ../../sdg1

  Read the article

• What is the impact of leaving a laptop in "sleep" mode (while on battery power)?

  - by Elazar Leibovich

  How much battery would leaving my laptop at "sleep" mode consume? is the consumption low enough so that it would be safe to leave the laptop sleeping at nights regularily and using it tommorow? What's the recommended period of time for which I should not turn it off, but let it sleep. (for example, if I'll use the computer in a minute - turning it off instead of making it to sleep will definitely not save battery due to the overhead of turning your computer on and off).

  Read the article

• Keyboard doesn't work after Windows resume from sleep (S3) -- how to fix?

  - by Marco Z

  I have a weird issue with my keyboard after resuming from S3 sleep: I can type perfectly for maybe 5 seconds, but afterwards the keyboard ceases to work until I hibernate or restart (or sleep again -- see below.) The rest of my system runs just fine -- just the keyboard apparently "freezes" up. Some closer observations: The keyboard will work for 5 seconds (and freeze again) every time I resume from sleep, even if it was frozen from a previous sleep The caps lock light will work fine within the 5 seconds. But after the keyboard "freezes", the light will remain on, but I'll be unable to turn it off. Perhaps this means power wasn't cut off from the keyboard, but it's just some software freezing up the port??? Given this info, would this indicate a problem with Windows itself? Drivers, maybe? Can I rule out the BIOS as the culprit? Finally, any ideas on how to fix? Thanks! Specs: Windows 7 x64 HP tx1000 laptop

  Read the article

• How can Windows 7 be set to sleep at 8pm and wake at 8am every day?

  - by Brett Alton

  I'm trying to figure out how to get Windows 7 to sleep at 8pm and wake at 8am on a daily basis. I'm looking at Windows' services and there is a Shutdown.exe that can run, but it only seems to have a /h flag for hibernation. For waking from sleep, there is a "wake Windows from sleep to run this task" option, but it never seems to work. There is also a Sleep.exe program I can download but it comes with 13MB of other libraries from Microsoft. Is there a C# program I can write to make this work?

  Read the article

• How to prevent Vista from entering Sleep mode when certain conditions exist?

  - by idyllhands

  Mainly, I would like to prevent my laptop from entering Sleep mode when I am playing music or streaming video. This is on my laptop, so another option that would work would be to prevent sleep mode whenever the laptop is plugged into my tv via HDMI (ie when HDMI port is in use). Or prevent sleep mode whenever there is audio playing.. I am soon upgrading to Windows 7, so solutions using 7 would be great also/instead. Thanks!

  Read the article

• Sleep Command in T-SQL?

  - by skb

  Is there to way write a T-SQL command to just make it sleep for a period of time? I am writing a web service asynchronously and I want to be able to run some tests to see if the asynchronous pattern is really going to make it more scalable. In order to "mock" an external service that is slow, I want to be able to call a SQL server with a script that runs slowly, but isn't actually processing a ton of stuff.

  Read the article

• sleep/wait in android apps

  - by Lynnooi

  Hi, I had an activity which calls a thread for 10times one after another. However, if the network is slow or too much information loaded, force close will occur. Will adding sleep in each thread help to solve this problem? or is there any other ways to solve it?

  Read the article

• Multithreading, when to yield versus sleep

  - by aaa

  hello. To clarify terminology, yield is when thread gives up its time slice. My platform of interest is POSIX threads, but I think question is general. Suppose I have consumer/producer pattern. If I want to throttle either consumer or producer, which is better to use, sleep or yield? I am mostly interested in efficiency of using either function. Thanks

  Read the article

• VBA Sleep Doesn't Work...

  - by Soo

  I know I'm doing something wrong here. I'm trying to use the sleep function to delay my code, but I get "Sub or Function not defined" error. Any tips?

  Read the article

• Confirm disk is broken when it passes all diagnostics

  - by Halfgaar

  I have a system with a potentially broken disk, but the disk passes all manner of diagnostics. I have been unable to confirm that the disk is broken. What are my options? I could just replace the disk, but because this situation is very similar to another more severe situation I have (long story), I'd like to actually make a proper diagnosis as opposed to randomly binning hardware. The issue and history is this: I had a Debian Linux PC (500 MHz P3) acting as router, nagios and munin. It crashed every couple of weeks. No logs or dmesg could be obtained (because it's an old Compaq that only boots when you configure it as keyboardless, making connecting a keyboard later, once it's booted, impossible). At the time, I just replaced the computer with another Compaq (P4 2.4 GHz) because I thought the hardware was faulty. However, it still crashed every couple of weeks. the difference is that on this computer, I can still SSH into it. It gives all kinds of errors on hda. I'd like to confirm that the disk is broken, but nothing I do confirms this: SMART error logs shows no errors. Normally when a disk starts acting up, SMART my pass, but it still records a read-error in the error log. SMART self-test (smartctl -t long /dev/sda) completes without errors. re-allocated sector count (a tell-tale parameter) has been 31 all its life, even when the disk was still in use in my desktop PC years ago, and it still is. The figure never changed. dd if=/dev/sda of=/dev/null bs=4096 passes with flying colors. What else can I do to assess the health of the drive? Again, this is not about making this router fully functional again, this is a disk forensic question, because it just so happens that I have another server that potentially has the same problem, and knowing the answer to this will possibly help me greatly. For the record, below are logs and such. This is the smartctl -a output: smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3120026A Serial Number: 5JT1CLQM Firmware Version: 3.06 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon Jul 1 21:18:33 2013 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 050 046 006 Pre-fail Always - 47766662 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 31 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 820305 9 Power_On_Hours 0x0032 048 048 000 Old_age Always - 46373 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 605 194 Temperature_Celsius 0x0022 036 065 000 Old_age Always - 36 195 Hardware_ECC_Recovered 0x001a 050 046 000 Old_age Always - 47766662 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 196 000 Old_age Always - 6 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 80% 46361 - # 2 Extended offline Completed without error 00% 46358 - # 3 Short offline Completed without error 00% 12046 - # 4 Extended offline Completed without error 00% 10472 - # 5 Short offline Completed without error 00% 10471 - # 6 Short offline Completed without error 00% 10471 - # 7 Short offline Completed without error 00% 6770 - # 8 Extended offline Aborted by host 90% 5958 - # 9 Extended offline Aborted by host 90% 5951 - #10 Short offline Completed without error 00% 5024 - #11 Extended offline Aborted by host 80% 5024 - #12 Short offline Completed without error 00% 3697 - #13 Short offline Completed without error 00% 237 - #14 Short offline Completed without error 00% 145 - #15 Short offline Completed without error 00% 69 - #16 Extended offline Completed without error 00% 68 - #17 Short offline Completed without error 00% 66 - #18 Short offline Completed without error 00% 49 - #19 Short offline Completed without error 00% 29 - #20 Short offline Completed without error 00% 29 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. And this is the dmesg error when it has crashed (which repeats for a bunch of different sectors): [1755091.211136] sd 0:0:0:0: [sda] Unhandled error code [1755091.211144] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1755091.211151] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 08 fe ad 38 00 00 08 00 [1755091.211166] end_request: I/O error, dev sda, sector 150908216

  Read the article

• "A disk read error occurred" when booting XP disk image in VirtualBox

  - by intuited

  I'm trying to boot an XP installation cloned into VirtualBox from a real drive. I'm getting the message A disk read error occurred Press Ctrl+Alt+Del to restart whenever* I try to boot the machine. * This is not strictly true: with AMD-V enabled, the boot process appears to not make it this far and instead hangs at a black screen with cursor. I created the VirtualBox image from the original drive using the following method: $ sudo ddrescue -n /dev/sdd sdd.img logfile # completed without errors $ VBoxManage convertfromraw sdd.img disk.vdi The original disk (and the image) contain a single NTFS partition with XP installed on it. The owner of the drive indicates that it did boot okay the last time the system made it that far. The (Pentium 4) system has a broken (enormous) heat sink, so at some point it failed to boot because it would quickly overheat and shut down. If I boot the VM from a live cd, I am able to mount its /dev/sda1 without any problems. I ran ntfsfix and didn't have any luck. I've read through the instructions on doing this. I didn't really follow them. For example, I didn't run MergeIDE before imaging because the machine was not bootable. However, the symptom of that problem seems to be quite different. The emitted message is contained in the volume boot record of the XP partition, which leads me to suspect that this is a problem with the core operating system bootstrap procedure, and not related to anything in the registry. I don't have an XP boot CD.

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >