Search Results

Search found 500 results on 20 pages for 'esxi'.

Page 8/20 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• How to install VMware tools for Ubuntu 11.04 hosted on VMware ESXi?

  - by Dmitri Toubelis

  I'm running Vmware ESX 4.1 and I have a development VM that I recently upgraded from Ubuntu 10.04 to 11.04. Then I tried to re-install VMware Tools and some of the modules gave me an error and would not compile. As a result I'm having problems with backing up this virtual machine now and I suspect VMware tools is the reason. I installed latest patches for VMware host, that included an update to VMware Tools (v8.3.7 build-381511) but I'm still getting the same error. The error I'm getting is like this: ... /tmp/vmware-root/modules/vmhgfs-only/super.c:73:4: error: unknown field \u2018clear_inode\u2019 specified in initializer make[2]: *** [/tmp/vmware-root/modules/vmhgfs-only/super.o] Error 1 make[1]: *** [_module_/tmp/vmware-root/modules/vmhgfs-only] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-generic' make: *** [vmhgfs.ko] Error 2 make: Leaving directory `/tmp/vmware-root/modules/vmhgfs-only' and also this: /tmp/vmware-root/modules/vmci-only/vmci_drv.c:91:4: error: unknown field \u2018ioctl\u2019 specified in initializer /tmp/vmware-root/modules/vmci-only/vmci_drv.c:91:4: warning: initialization from incompatible pointer type /tmp/vmware-root/modules/vmci-only/vmci_drv.c: In function \u2018vmci_init\u2019: /tmp/vmware-root/modules/vmci-only/vmci_drv.c:151:4: error: implicit declaration of function \u2018init_MUTEX\u2019 make[2]: *** [/tmp/vmware-root/modules/vmci-only/vmci_drv.o] Error 1 make[1]: *** [_module_/tmp/vmware-root/modules/vmci-only] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-generic' make: *** [vmci.ko] Error 2 make: Leaving directory `/tmp/vmware-root/modules/vmci-only' Any ideas?

  Read the article

• VMWare Host needing ESXi 5.0 - Running on a 2008 R2 Host?

  - by Great Big Al

  I have a VMWare image supplied by my Phone System provider which manages a contact management interface, they tell me that VMWare EsXi5.0 is the highest supported host. I'm used to MS HyperV and have no VMWare experiance. At present I have this guest running on a simple desktop PC running ESXi5.0.0, I'd idealy like to run this guest (it's Windows 7 with their software already installed and configured) on a Windows 2008R2 server I have available, as I said, I'm used to HyperV and I can't easily identify if there is a version of VMWare that supports ESXi5.0 guests that will run on a Windows 2008 R2 server host. Is there such a product, what's it called, and with one guest can I run it without purchasing a license? Thanks

  Read the article

• vmware esxi 5, cant create snapshots and consolidate fails, how to delete old or consolidate redo logs?

  - by Scott Szretter

  I have a VM that seems to be working ok, but when VMWare DR (or I) tries to create a snap shot, it fails, and when I view the summary page of the VM it has a warning at the top showing that the disks need to be consolidated. So I go to snapshot manager for the VM and choose consolidate (in snapshot manager, there are no snapshots actually listed by the way). If fails with this error: This virtual machine has 255 or more redo logs in a single branch of its snapshot tree. The maximum supported limit has been reached, creating new snapshots will not be allowed. To create new snapshots, please delete old snapshots or consolidate the redo logs. If I browse the data store (which has plenty of free space, 2 TB and this vm is under 40gb), in the vm folder, I do in fact see a bunch of files, numbered all the way to 0255: myvm-000255-ctk.vmdk myvm-000255-delta.vmdk myvm-000255.vmdk How can I clean all this up? Is there an SSH command line command or can I delete some of the files safely? Thanks!

  Read the article

• How can I create a copy of a vm in vSphere Client running on ESXi 4.0?

  - by user37860

  I'd like to create copies of the VMs located on my datastore that I can put up temporarily on a different server while I perform some maintenance on our main virtualization server. Aside from using the Converter utility (which I don't believe I can use with the Linux machines) is there a way to make copies of these machines? It would make my life a lot easier. Thanks!

  Read the article

• ESXi - Should failover node be in the same geographic location?

  - by Ryan

  For some reason it seems to me that at least one failover should be in the same building. But really I have no idea. Could there be an issue with routing delays for users during a failure? I'm just imagining reasons at this point. Let me know, should at least one failover node be at the same geographic location as the other? I am trying to prevent what appears to be a poor decision so any feedback or life experience you can share would be grand. Will mostly be running Windows Server 2008 with SQL Server 2008 as our guest OS.

  Read the article

• Is it possible/advisable to run VMware Server ESX/ESXi on a laptop?

  - by cletus

  The idea of having a small footprint hypervisor as the primary OS on a laptop or desktop where every "real" OS is a guest appeals to me. Now I realize this software is more typically used on blades and the other servers but can it be done on a normal PC? Should it be? What requirements are there (eg hardware/BIOS/chipset)? Is there a performance impact for doing so? Is it a good/bad idea?

  Read the article

• VMWare use of Gratuitous ARP REPLY

  - by trs80

  I have an ESXi cluster that hosts several Windows Server VMs and around 30 Windows workstation VMs. Packet captures show a high number of ARP replies of the form: -sender_ip: VM IP -sender_mac: VM virtual MAC -target_ip: 0.0.0.0 -target_mac: Switch interface MAC The specific addresses aren't really a concern -- they're all legitimate and we're not having any problems with communications (most of the questions surrounding GARP and VMWare have to do with ping issues, a problem we don't have). I'm looking for an explanation of the traffic pattern in an environment that functions as expected. So the question is why would I see a high number of unsolicited ARP replies? Is this a mechanism VMWare uses for some purpose? What is it? Is there an alternative? EDIT: Quick diagram: [esxi]--[switch vlan]--[inline IDS]--[fw]--(rest of network) The IDS is complaining about these unsolicited ARPs. Several IDS vendors trigger on ARP replies without a prior request, or for ARP replies that have a target IP of 0.0.0.0. The target MAC in these replies is the VLAN interface on the switch. Capture points: -The IDS grabs the offending packets -The FW can see the same ones -A VM on the ESXi host does not see these, although there is an ARP request for a specific IP on the ESXi host that has source_ip=0.0.0.0 and source_mac=[switch vlan interface]. I can't share the captures, unfortunately. Really I'm interested in finding out if this is normal for an ESXi deployment.

  Read the article

• How to install VMWare ESXi CLI on CentOS 6.0?

  - by weekens

  I'm trying to install VMware-vSphere-CLI-5.0.0-422456.x86_64 onto CentOS 6.0 64bit, but the installer complains: CPAN not able to install following Perl modules on the system. These must be installed manually for use by vSphere CLI: UUID 0.03 or newer I tried to do sudo yum install uuid-perl and also sudo yum install perl-SOAP-Lite perl-Data-Dump perl-Class-MethodMaker perl-Crypt-SSLeay perl-libxml-perl perl-XML-LibXML-Common but this doesn't help. What else can I try to do?

  Read the article

• On ESXi, guest machines hang for significant intervals compared to real machines. How can I fix this?

  - by Tarbox

  This is ESXi version 5.0.0. We plan on upgrading to 5.5 eventually. I have four code profiles, two taken on a real, unvirtualized machine, two taken on a virtual machine. Ordering the list of subroutines by time spent in each one, the two real profiles are practically identical. The two virtual profiles are different from each other and from the real profiles: a subset of subroutines are taking a lot more time on the virtual machines, and the subset is different for each run. The two virtual profiles take a similar amount of time, which is 3 times the amount of time the real profiles take. This gross "how long does it take?" result is consistent after hundreds of tests across three different virtual machines on two different host machines -- the virtual machine is just slower. I've only the code profiling on the four, however. Here's the most guilty set of lines: This is the real machine: 8µs $text = '' unless defined $text; 1.48ms foreach ( split( "\n", $text ) ) { This is the first run on the virtual machine: 20.1ms $text = '' unless defined $text; 1.49ms foreach ( split( "\n", $text ) ) { This is the second run on the virtual machine: 6µs $text = '' unless defined $text; 21.9ms foreach ( split( "\n", $text ) ) { My WAG is that the VM is swapping out the thread and then swapping it back in, destroying some level of cache in the process, but these code profiles were taken when the vm in question was the only active vm on the host, so... what? What does that mean? The guest itself is under light load, this is a latency problem for my users rather than throughput. The host is also under a light load, if I knew what resources to assign where, I could do it without worrying about the cost. I've attempted to lock memory, reserve cpu, assign a restrictive affinity, and disable hyperthread sharing. They don't help, it still takes the VM 2-4x the amount of time to do the same thing as the real machine. The host the tests were run on is 6x2.50GHz, Intel Xeon E5-26400 w/ 16gigs of ram. The guest exhibits the same performance under a wide combination of settings. The real machine is 4x2.13GHz, Xeon E5506 w/ 2 gigs of ram. Thank you for all advice.

  Read the article

• Network speed between a VM and another machine which is not residing on the same host, is 11MB/s at most

  - by Henno

  Problem Network speed between a VM and another machine which is not residing on the same host, is 11MB/s at most. Topology Facts ESXi5 version is 5.0.0.504890 VM has the latest Vmware Tools installed VM is using E1000 network driver Physical box has Win Srv 2008 R2 as the OS CrystalDiskMark says the drive on physical box can read/write 100MB/s vCenter is another vm on esx both vm and physical box are showing 1Gbps link speed Configuration Networking shows vmnic0 as 1000 Full NTttcp is a client/server tool from Microsoft for measuring pure network throughput Here's what I've done so far: Test1: VM is running Filezilla FTP Server (default settings, one user account made) Physical box is running Filezilla FTP Client (default settings) Physical box is uploading a big file to FTP server Transfer speed (as observed by Windows Task Manager on both machines): ~11MB/s (bad) Physical box is downloading that file from FTP server Transfer speed (as observed by Windows Task Manager on both machines): still ~11MB/s (bad) Could it be disk performance issue? Test2: Physical box is running ntttcpr.exe -a 6 -m 6,0,VM_IP_ADDRESS VM is running ntttcps.exe -a 6 -m 6,0,PHY_BOX_IP_ADDRESS Transfer speed (as observed by Windows Task Manager on both machines): ~11MB/s (bad) Could it be switch performance issue? Test3: physical box is running vSphere Client I open Summary Storage datastore Browse Datastore... from physical box and upload a file to datastore Transfer speed (as observed by Windows Task Manager on physical box): ~26-36MB/s (good) Could it be a vm specific issue? Test4: Installed ntttcp to another vm on the same esx server Measured network performance between vms on the same esx server with NTttcp Transfer speed (as observed by Windows Task Manager on physical box): ~90-120MB/s (excellent :) Test5: I have another esx server on the same site, connecting to the same datastore and same switch. Those two ESX servers have both 2 NICs. One NIC goes to switch while the other goes directly to the other ESX server. vMotioned one of the testing vms off to the other ESX host Measured network performance between vms on different esx servers with NTttcp Transfer speed (as observed by Windows Task Manager on physical box): ~11MB/s (bad) While I'm aware of these: ESXi 4.1 slow file transfer ESXi 5 network performance is slow Debian Etch and ESXi slow network speeds VMWare ESXi slow file copy to guest they did not help (or I must have been missed something)

  Read the article

• XenServer VMs can't reach network

  - by toto

  I'm currently trying to setup a small cloud architecture , I'm using in the installation CloudStack 2.2.14 which need two node : a management server (as node1) to provision the cloud and a hyperviser XenServer 5.6 SP2 to host the VMs (as node2). I succeded to create both node1 and node2 into an ESXi 5 VMWare as VMs. So The ESXi 5 is hosting two VMs node1 + node2 , and node2 which is the XenServer will host also VMs (such as ubuntu or Centos). Both node1 and node2 can ping each other and can get the internet connection from Esxi5 ,but My problem is : that VMs into the node2(XenServer) can't reach the network (can't ping node1 or Esxi or get an internet connection but they can ping VMs IN the node2(XenServer). So I tried to: 1-Setup a DHCP server as node3 in ESXi5 and connect node2(Xenserver) to him , but always the VMs into to node2 can't reach the outer network. 2-Setup a DCHP server into node2 , but always the same problem. So , 1-is there any other configuration i'm missing in node2 (considering that I'm sure about DNS , GW , NETMASK configuration)?. 2-Is it the problem because i'm Creating VMs into node2(XenSever) which is a VM into ESXi 5 ?

  Read the article

• ESXi 4.0 Guests Locking up

  - by Brendan Sherwin

  I installed ESXi 4.0 on an HP Proliant g5 with a 64bit Xeon processor and took advantage of the free license as I work for a public school. I created two instances of server 2003 from scratch, one to be the DC, DHCP, the other to be a file server and DNS/DHCP backup. I had both guests up and running fine, setup my user accounts, transferred the data, etc etc. Once I joined a client machine to the domain, I would find that both of my Windows guests would lock up. Sometimes it would be for five or so minutes, once it was overnight. The "locked up" state means that as far I could tell, all services were stopped; dhcp no longer handed out IP's, DNS stopped working, I couldn't RDP into the server. The ESXi host, my HP server, was still running fine. VSphere was working, and I could look at the performance of the individual guests.I would try Powering off the hosts from inside VSPhere, and the hosts would start powering off, but get stuck at 95%, and stay that way, sometimes only for 10 minutes, others for hours. Several times I had to restart ESXi from it's console in order to restart my machines. Now, can anyone tell me what is happening, and how I can fix it, or take steps to prevent it? I hired a consultant to come take a look at it, someone who's experience and knowledge I trust, and he told me he had never seen anything like this ever before. He spoke to a friend of his who is VM certified, and he also said he had never heard of this issue. Thanks for your replies, and I'll do my best to respond ASAP. Currently, the server is powered off, and I've reinstituted my nine year old Server 2000 boxes, and I'm considering installing ESXi 3.5. Does anyone know a host created in 4.0 will work in 3.5? I'd really like to avoid having to rebuild those accounts! I know 4.0 works on this server, as I have another server in another school with the same exact hardware running 4.0 fine. Brendan

  Read the article

• Guacamole on KVM

  - by Siem Hermans

  I currently run a deployment where I provide virtual machines to circa 25 users through ESXi over the VMWare WSX web portal. This works, no doubt about it, it is fast, stable and reliable enough for the end users. However I stumbled across the Guacamole project (Link: http://guac-dev.org/) and the KVM project (Link: http://www.linux-kvm.org/). I must say I am no genius when it comes to Linux but I am interested in replacing the ESXi and WSX combination with a Guacamole and KVM deployment. I have seen people across the internet use ESXi in combination with Guacamole (mostly prior to the release of WSX), but I have yet to see someone use it in conjunction with KVM. Considering my amount of knowledge on Linux in general I would like to ask: Is it possible at all to combine the two?

  Read the article

• How can I shut down all my Virtual Machines when my UPS kicks in?

  - by Tim

  I have a Dell T610 running ESXi4, an APC Smart UPS 1000VA and a local "console" machine running Vista and the vSphere 4 Essentials pack. A dedicated management network is in place between the T610 and the Vista machine. We have 4 VMs: SBS 2003, Server 2003 running Terminal Services, and two XP Machines. Ideally, when the UPS is forced to use battery power [for a set number minutes], I would like to gracefully shutdown all the VMs, then the ESXi, then the console machine. The latter two are not strictly a priority, but the VMs within ESXi are. Google provided lots of deprecated scripts that used to work on ESXi 3.x or similar, however I am unable to find what they were deprecated by. What do I need to be able to do this? I have Powerchute Express as supplied with the UPS, but would be willing to pay for software if required.

  Read the article

• I have a ESXi 5.0 installed and when I am Installing Ubuntu Server 12.04 LTS it is giving an error saying grub installation failed?

  - by Rishee

  I have a ESXi 5.0 installed and when I am Installing Ubuntu Server 12.04 LTS (32 bit) it is giving an error saying grub installation failed? Please check the below screenshot of the error. I have other Ubuntu servers running fine on this esxi server, so I don't think problem is with ESXi. I have 32 GB of ram spare on this ESXi and have given 2 GB of RAM to this 12.0 LTS VM. I have given 2 cores of processor. I have tried supplying different ISO Image to this VM as I thought the 1st image that I downloaded has errors.. But defiantly that's not the case as all 3 different ISO images that I downloaded of Ubuntu server 12.04 LTS (32-bit) can't be corrupt!! Just to make sure that the Image does not have problem I used that Image to install it for testing on stand alone system. it works fine there!! This is a production ESXi server with which I can't play with, how ever I can play whith the Ubuntu Server 12.04 LTS (32-Bit) VM that we have created on that ESXi. I need help on this as soon as possible. go live date of this server is really close. (This Question is already there on Super user and Server Fault.)

  Read the article

• How do you get the VMWare vSphere client to work on Windows 7 RC?

  - by Keith Sirmons

  Howdy, When trying to connect to a ESXi server using the VMWare vShere Client I get an error: Error parsing the server "server" "clients.xml" file. Login will continue, contact your system administrator. Followed by: The type initializer for 'VirtualInfrastructure.Utils.HttpWebRequestProxy' threw an exception. Any clues to fix this? Windows 7 x64 RC Build 7100 vSphere client from ESXi 4.0.0 ReleaseBuild-171294 Thank you, Keith

  Read the article

• How can I create a copy of a vm in vSphere Client running on ESXi 4.0?

  - by user294746

  I'd like to create copies of the VMs located on my datastore that I can put up temporarily on a different server while I perform some maintenance on our main virtualization server. Aside from using the Converter utility (which I don't believe I can use with the Linux machines) is there a way to make copies of these machines? It would make my life a lot easier. Thank!

  Read the article

• VMware 4 ESXi on 64Bit CPU does it run 64Bit Guests ?

  - by Data-Base

  Hello, I have a PC with AMD FX CPU (Do not remember if it was FX51 or FX60) it is 64Bit does it means that I can run 64Bit Guests? even if it does not have the Visualization extensions in the CPU?

  Read the article

• Openfiler iSCSI performance

  - by Justin

  Hoping someone can point me in the right direction with some iSCSI performance issues I'm having. I'm running Openfiler 2.99 on an older ProLiant DL360 G5. Dual Xeon processor, 6GB ECC RAM, Intel Gigabit Server NIC, SAS controller with and 3 10K SAS drives in a RAID 5. When I run a simple write test from the box directly the performance is very good: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 4.64468 s, 226 MB/s So I created a LUN, attached it to another box I have running ESXi 5.1 (Core i7 2600k, 16GB RAM, Intel Gigabit Server NIC) and created a new datastore. Once I created the datastore I was able to create and start a VM running CentOS with 2GB of RAM and 16GB of disk space. The OS installed fine and I'm able to use it but when I ran the same test inside the VM I get dramatically different results: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 26.8786 s, 39.0 MB/s [root@localhost ~]# Both servers have brand new Intel Server NIC's and I have Jumbo Frames enabled on the switch, the openfiler box as well as the VMKernel adapter on the ESXi box. I can confirm this is set up properly by using the vmkping command from the ESXi host: ~ # vmkping 10.0.0.1 -s 9000 PING 10.0.0.1 (10.0.0.1): 9000 data bytes 9008 bytes from 10.0.0.1: icmp_seq=0 ttl=64 time=0.533 ms 9008 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.736 ms 9008 bytes from 10.0.0.1: icmp_seq=2 ttl=64 time=0.570 ms The only thing I haven't tried as far as networking goes is bonding two interfaces together. I'm open to trying that down the road but for now I am trying to keep things simple. I know this is a pretty modest setup and I'm not expecting top notch performance but I would like to see 90-100MB/s. Any ideas?

  Read the article

• Changing time intervals for vSphere performance monitoring, and is there a better way?

  - by user991710

  I have a set of experiments running on a cluster node which is running ESXi 5.1, and I want to monitor the resource consumption on the node itself. Specifically, I am currently running experiments on a subset of the VMs on the ESXi host and wish to monitor resource consumption on those specific VMs. Right now, since I'm using only a single ESXi host, I am using vSphere to access it and the performance reports. Ideally, I would like to get these reports for different time intervals. I can already get the charts for a time interval of 1h, but these are rather long-running experiments and something like 2h, 3h,... would be preferable. However, I cannot seem to change the time interval. Here is an example of what my Customize Performance Chart dialog shows: I am also running on a trial key at the moment. How can I change this interval? Do I need a standard license, or do I just need to turn off the VM (unlikely, but I haven't attempted it yet as these are long-running experiments)? Any help (or pointers to documentation which deals with the above -- I've already looked but did not find much) would be greatly appreciated.

  Read the article

• ESXi with software iSCSI

  - by jharley

  Has anyone had any luck using the swiSCSI driver on ESXi? Following the instructions from VMWare.com I get to the point where I have the iSCSI HBA showing up but no LUNs/targets are showing up. The iSCSI target is running on Solaris 10 update 5 and works with other initiators fine. The ESXi initiator (from the logs) sees the targets but just logs in and out of them every 2 - 5 seconds. We're using unauthenticated discovery, and over and over in /var/log/messages I see: iSCSI: bus 0 target 0 trying to establish session 0xb203f90 to portal 0, address 10.1.100.9 port 3260 group 1 iSCSI: bus 0 target 0 establish session 0xb203f90 #4848 to port 0, address 10.1.100.9 port 3260 group 1, alias data/ESXi iSCSI: session 0xb203f90 dropping after receiving unexpected opcode 0x60 iSCSI: session 0xb203f90 to data/ESXi dropped iSCSI: session 0xb203f90 to data/ESXi waiting 2 seconds before next login attempt The only other thing that seems out of wack is that my 'Recent Tasks' pane keeps filling with 'Browse Diagnostic Manager' events and /var/log/vmware/hostd.log is filled with messages like this up to two times per second: [2008-09-19 16:05:57.901 'TaskManager' 196621 info] Task Created: haTask-ha-host-vim.DiagnosticManager.browser-776 [2008-09-19 16:05:57.094 'TaskManager' 196621 info] Task Completed: haTask-ha-host-vim.DiagnosticManager.browser-766 Any help would be appreciated.

  Read the article

• Do I need VMWare vSphere?

  - by Gk

  I'm planning use vmware to upgrade some of very aged server instead replace with all new bunch of server. VMWare vSphere sounds great but because of low budget I can't afford for both licenses and SANs. Without SAN, is vSphere worth the price? As I know without SAN, the VMWare HA, VMontion, FT is unavailable. So, do I need vSphere or only ESXi free version assume that I only need backup vm daily? Do you know any completed solution about backup on ESXi 4? TIA, -Gk

  Read the article

• networking through openstack installed on vm

  - by Mandar Katdare

  I am trying to set up a test installation of Openstack on a Ubuntu 12.04 VM running on a ESXi server. So far I have been able to launch the VMs on the ESXi, however am unable to assign IP addresses to them. As the VM with the Openstack installation has a single public IP, I wish to assign IPs to the VMs create through Openstack so that they can directly interact with the public network itself without having a separate private network. So I feel that bridging would not be the correct option here. But am unable to find the correct documents to go ahead with such an install. My ifconfig looks as follows: eth0 Link encap:Ethernet HWaddr 00:0c:29:6f:8a:d7 inet addr:192.168.4.167 Bcast:192.168.4.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe6f:8ad7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:391640 errors:33 dropped:98 overruns:0 frame:0 TX packets:545044 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:40303931 (40.3 MB) TX bytes:763127348 (763.1 MB) Interrupt:18 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:146127 errors:0 dropped:0 overruns:0 frame:0 TX packets:146127 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:799815763 (799.8 MB) TX bytes:799815763 (799.8 MB) virbr0 Link encap:Ethernet HWaddr 8a:80:33:32:63:a0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) The eth0 is the adapter that I intend to use for all communication. My nova.conf looks as follows: --dhcpbridge_flagfile=/etc/nova/nova.conf --dhcpbridge=/usr/bin/nova-dhcpbridge --logdir=/var/log/nova --state_path=/var/lib/nova --lock_path=/var/lock/nova --allow_admin_api=true --use_deprecated_auth=false --auth_strategy=keystone --scheduler_driver=nova.scheduler.simple.SimpleScheduler --s3_host=192.168.4.167 --ec2_host=192.168.4.167 --rabbit_host=192.168.4.167 --cc_host=192.168.4.167 --nova_url=http://192.168.4.167:8774/v1.1/ --routing_source_ip=192.168.4.167 --glance_api_servers=192.168.4.167:9292 --image_service=nova.image.glance.GlanceImageService --iscsi_ip_prefix=192.168.4 --sql_connection=mysql://novadbadmin:[email protected]/nova --ec2_url=http://192.168.4.167:8773/services/Cloud --keystone_ec2_url=http://192.168.4.167:5000/v2.0/ec2tokens --api_paste_config=/etc/nova/api-paste.ini --libvirt_type=kvm --libvirt_use_virtio_for_bridges=true --start_guests_on_host_boot=true --resume_guests_state_on_host_boot=true --vnc_enabled=true --vncproxy_url=http://192.168.4.167:6080 --vnc_console_proxy_url=http://192.168.4.167:6080 # network specific settings --network_manager=nova.network.manager.FlatDHCPManager --public_interface=eth0 --vmwareapi_host_ip=192.168.4.254 --vmwareapi_host_username=**** --vmwareapi_host_password=**** --vmwareapi_wsdl_loc=http://127.0.0.1:8080/wsdl/vim25/vimService.wsdl --fixed_range=192.168.4.190/24 --floating_range=192.168.4.190/24 --network_size=32 --flat_network_dhcp_start=192.168.4.190 --flat_injected=False --force_dhcp_release --iscsi_helper=tgtadm --connection_type=vmwareapi --root_helper=sudo nova-rootwrap --verbose --libvirt_use_virtio_for_bridges --ec2_private_dns_show --novnc_enabled=true --novncproxy_base_url=http://192.168.4.167:6080/vnc_auto.html --vncserver_proxyclient_address=192.168.4.167 --vncserver_listen=192.168.4.167 192.168.4.167 is my VM with the Openstack installation and 192.168.4.254 is my ESXi server on which the VM runs. Can anyone advice me about how to proceed? Thanks, Mandar

  Read the article

• What kind of storage do people actually use for VMware ESX servers?

  - by Dirk Paessler

  VMware and many network evangelists try to tell you that sophisticated (=expensive) fiber SANs are the "only" storage option for VMware ESX and ESXi servers. Well, yes, of course. Using a SAN is fast, reliable and makes vMotion possible. Great. But: Can all ESX/ESXi users really afford SANs? My theory is that less than 20% of all VMware ESX installations on this planet actually use fiber or iSCS SANs. Most of these installation will be in larger companies who can afford this. I would predict that most VMware installations use "attached storage" (vmdks are stored on disks inside the server). Most of them run in SMEs and there are so many of them! We run two ESX 3.5 servers with attached storage and two ESX 4 servers with an iSCS san. And the "real live difference" between both is barely notable :-) Do you know of any official statistics for this question? What do you use as your storage medium?

  Read the article

• Optimising bare-metal hypervisor installation

  - by Stephen

  what is the best way to install a bare metal hypervisor (i.e. to host multiple VM's)? I spoke to a friend and he is using a HP server to host all his VMs with VMware ESXi, but he installed the VMWARE esxi software on a flash card. He can then use his full hard disk capacity from each drive for the VMs. Is this a pretty standard setup when configuring a bare-metal hypervisor? How do you guys do it, and what is best?

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >