Search Results

Search found 1729 results on 70 pages for 'identifier'.

Page 8/70 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• Only One GPU Detected in the Nvidia Quadro NVS 450

  - by Kyle Brandt

  I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia... Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there): # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010 Section "ServerLayout" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "DELL E207WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:6:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro NVS 450" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+275, DFP-3: nvidia-auto-select +1680+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-3" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-3: nvidia-auto-select +1680+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "DFP-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection lscpi: 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:02.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 2 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 13) 00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 13) 00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 13) 00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 13) 00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 01:00.0 IDE interface: Device 1b4b:91a3 (rev 11) 02:00.0 USB Controller: NEC Corporation Device 0194 (rev 03) 03:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:00.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 04:02.0 PCI bridge: nVidia Corporation PCI express bridge for Quadro Plex S4 / Tesla S870 / Tesla S1070 (rev a3) 05:00.0 3D controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 06:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 450] (rev a1) 08:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 08:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 02) 09:00.0 SATA controller: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 09:00.1 IDE interface: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller (rev 03) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0b:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)

  Read the article

• What are working xorg.conf settings for using a Matrox TripleHead2Go @ 5040x1050?

  - by Brendan Abel

  I'm trying to configure xorg.conf to correctly set the resolution of my screens. I'm using a matrox triplehead, so the monitor is a single 5040x1050 screen. Unfortunately, it's being incorrectly set to 3840x1024. Here is my xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Matrox" HorizSync 31.5 - 80.0 VertRefresh 57.0 - 75.0 #Option "DPMS" Modeline "5040x1050@60" 451.27 5040 5072 6784 6816 1050 1071 1081 1103 #Modeline "5040x1050@59" 441.28 5040 5072 6744 6776 1050 1071 1081 1103 #Modeline "5040x1050@57" 421.62 5040 5072 6672 6704 1050 1071 1081 1103 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GTX+" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "5040x1050" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Can fully-qualified hostname be used as a unique identifier?

  - by xxbbcc

  If I get the fully qualified computer name on a Windows server (2K3 or 2K8) using the GetComputerNameEx() API call, can I rely on that name to be unique on that particular domain? That is, can I assume that only a single active physical or virtual machine will have that fully qualified name at a given time? As a second question: is it guaranteed that all Windows machines will have such a fully-qualified name? Thanks for any help.

  Read the article

• Resolution stuck after playing OpenGL game

  - by kit.yang

  I used to start the game,Frozen Throne (using wine) with the option of "-opengl".When I entered the game,the resolution will changed,and restored after exit the game. But this time a problem happened.The resolution can't restore although I restart my computer several times. Both the Ubuntu pane and login windows are exceptional. nvidia-settingsalso detect the resolution is "1024 x 768",But it seemed useless using this tool. Screenshot-NVIDIA X Server Settings: the result of xrandr: Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 50.0* 800x600 51.0 52.0 53.0 680x384 54.0 55.0 640x480 56.0 576x432 57.0 512x384 58.0 400x300 59.0 60.0 61.0 320x240 62.0 the configure of /etc/X11/xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@yellow) Fri Apr 9 11:51:21 UTC 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "CRT-0" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Entry Graphics" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1024x768_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Could not apply the stored configuration for the monitor

  - by dellphi

  I'm using Nvidia 7300 gt and monitor-Acer V173w, on 64 bit Ubuntu 10.04. Compiz and Emerald went well, but at the time of entry into the GUI, I always receive the message : "Could not apply the stored configuration for the monitor, could not find a suitable configuration of screens" Why do I always receive it, and what is wrong with the monitor configuration or pci-e is used? root@dellph1-desktop:/# xrandr Screen 0: minimum 320 x 240, current 1440 x 900, maximum 1440 x 900 default connected 1440x900+0+0 0mm x 0mm 1440x900 50.0* 1024x768 51.0 58.0 59.0 1360x768 52.0 53.0 1152x864 54.0 55.0 56.0 57.0 960x600 60.0 960x540 61.0 896x672 62.0 840x525 63.0 64.0 65.0 66.0 832x624 67.0 800x600 68.0 69.0 70.0 71.0 72.0 73.0 800x512 74.0 720x450 75.0 680x384 76.0 77.0 640x512 78.0 79.0 640x480 80.0 81.0 82.0 83.0 576x432 84.0 85.0 86.0 87.0 512x384 88.0 89.0 90.0 416x312 91.0 400x300 92.0 93.0 94.0 95.0 320x240 96.0 97.0 98.0 root@dellph1-desktop:/# === xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 260.19.29 ([email protected]) Wed Dec 8 12:27:27 PST 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: xconfig, VertRefresh source: xconfig Identifier "Monitor0" VendorName "Unknown" ModelName "Acer V173W" HorizSync 30.0 - 83.0 VertRefresh 55.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 7300 GT" EndSection Section "Screen" # Removed Option "metamodes" " 1440x900_60 +0+0; 1280x1024 +0+0" # Removed Option "metamodes" "1440x900 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1440x900_75 +0+0; 1440x900 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• How can I set external monitor as default?

  - by iJeeves

  I have connected an external monitor to my laptop through HDMI. Currently either my Desktop is getting extended to the external monitor (with native resolution) or low resolution on both when I choose "Same Image in both". How can I ensure that the external monitor is used by default and the laptop monitor just blanks. I generated the xorg.conf file by doing: X -configure The following is the content of xorg.conf.new file generated in my user folder. Should I copy this anywhere? Should I edit the contents? Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "record" Load "extmod" Load "dbe" Load "dri" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: : integer, : float, : "True"/"False", ### : "String", : " Hz/kHz/MHz", ### : "%" ### [arg]: arg optional #Option "NoAccel" # [] #Option "SWcursor" # [] #Option "ColorKey" # #Option "CacheLines" # #Option "Dac6Bit" # [] #Option "DRI" # [] #Option "NoDDC" # [] #Option "ShowCache" # [] #Option "XvMCSurfaces" # #Option "PageFlip" # [] Identifier "Card0" Driver "intel" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Nvidia dual monitor configuration gets lost every time I reboot

  - by sunwukung

  I've recently updated (well, borked then completely reinstalled) to 12.04. I'm running a dual monitor setup, with a Dell U2410 / Dell 2007WFP combination on an HP Elite Book 8560W. The graphics card is an NVIDIA GF108 [Quadro 1000M]. My problem is as follows. I can get the dual monitor setup working fine, but every time I reboot, my machine appears to lose the settings (specifically, the U2410 is disabled, the mouse pointer is locked in the launcher). I have to restate the settings after every launch. I've tried running nvidia-settings as sudo, I've save the changes to my xorg.conf file (see below) but nothing seems to be sticking. Has anyone had similair issues, or know of a fix? Conf file follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2007WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro 1000M" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "CRT: 1680x1050 +1920+0, DFP-1: 1920x1200 +0+0; CRT: nvidia-auto-select +0+0, DFP-1: NULL" SubSection "Display" Depth 24 EndSubSection EndSection The error message I'm getting is this: none of the selected modes were compatible with the possible modes: Trying modes for CRTC 642: CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1)

  Read the article

• VLC Ati Radeon 6870 Ubuntu 12.04 image skewed flicker

  - by Aaron

  I'm running Ubuntu 12.04 with ATI Radeon 6870 connected to my 40' Sharp TV. The video image is slightly jigged, like breaking a bit and slightly delayed. It just isn't smooth. The computer is very fast, like i7 with 12gb ram. I tried to run the same video with my mac laptop and on the tv with the same connection cable and it was running smoothly. i tried changing the video output in VLC to x11, increase caching, h264 skip loop filter to all, increase monitor refresh rate although it's already at 60 and it's an LCD tv. this is my xorg.conf : Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[3]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "0-DFP9" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1920x1080" EndSection Section "Monitor" Identifier "0-DFP10" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "amdcccle-Device[3]-0" Driver "fglrx" Option "Monitor-DFP9" "0-DFP9" BusID "PCI:3:0:0" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[3]-0" Device "amdcccle-Device[3]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• nvidia: switching dvi socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Switching DVI socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Over-scan Issues when using HDTV through VGA

  - by RPG Master

  Right now all we can do is set the TV to 1280x768 instead of its native resolution of 1360x768. Setting it to its native resolution gives you a screen with a large portion of the left side of the screen cut off. We've tried everything with the TV so now we're turning to the innards of Ubuntu in hopes of fixing this. The computer is using an NVIDIA GeForce GT240. This is its current xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin # HorizSync 28.0 - 55.0 # VertRefresh 43.0 - 72.0 Identifier "Monitor0" VendorName "Unknown" ModelName "CRT-0" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 6600" EndSection Section "Screen" # Removed Option "metamodes" "1360x768 +0+0; 800x600 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1360x768 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Xorg crashes ever since using Nvidia dual monitors

  - by legion

  Well ever since I have used dual monitors with the NVIDIA X Server Settings program my xorg process has been crashing after a while, and its generally a pretty long while of like 6 hours afterwards. Before NVIDIA changed my xorg.conf file I only had xorg crash like twice in 2 months, I can't figure out what is going on. I am running ubuntu 12.04 with the MATE desktop environment v 1.2.0 xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LEN" HorizSync 51.8 - 55.8 VertRefresh 40.0 - 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "NVS 3100M" EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-1: nvidia-auto-select +0+0, CRT: nvidia-auto-select +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinViewXineramaInfoOrder" "DFP-1" Option "TwinView" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Wine causes twin view to break

  - by deanvz

  I have endlessly been playing around with the Nvidia X Server settings and changing my xorg.conf file to try and work for me and on most days its fine. In each instance I get it working for a while and then this morning the most bizarre thing happens. The moment I open any type of Wine program (which never use to be a problem) my Twin View setup disappears and am left with mirrored displays. I try and change the settings in the Nvidia driver, but its not interested and the screens remain mirrored. I have a work around. Restart my pc... Below are the contents of my current xorg.conf file. # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:43:34 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "LG Electronics W1934" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9400 GT" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1440+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Nvidia drivers with GeForce 680M problem [closed]

  - by biofermin

  Possible Duplicate: There's an issue with an Alpha/Beta Release of Ubuntu, what should I do? I have a new Alienware M17x which I have installed 64-bit Ubuntu 12.10 (dual boot). I have tried various ways to install the Nvidia drivers for the GeForce GTX 680M (which they claim they are compatible with): from Ubuntu Software Centre (though Additional Drivers fails to detect the card.) using sudo apt-get install nvidia-current downloading the drivers from nvidia and manually installing them (ctrl + alt + F6, sudo service lightdm stop, sudo ./NVIDIA*, sudo reboot) (each with a clean install of Ubuntu) but in all cases, when I reboot after installing nvidia-setings claims that I am not using the driver and should sudo nvidia-xconfig from the terminal, which I do but this has no effect and I am stuck in crappy resolution until I rm /etc/X11/xorg.conf and reboot. The xorg.conf that nvidia-xconfig generates is: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• xubutnu Nvidia Settings not remembered

  - by hozza

  I have an Nvidia card and I'm using NVIDIA Driver Version: 304.51 and the NVIDIA X Server Settings GUI. Everything works fine but when I reboot and login again both my two screens are set to +0 +0 so they mirror each other... I change the settings to screen 2 (NEC LED) to be left of screen 1 (DELL) click Apply and Save to X Configuration File... It all works but when I login again the settings are not remembered... This is my xorg config file, can anyone help out? # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2005FPW" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 640" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: nvidia-auto-select +1280+0, DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Dual Monitor in Ubuntu 11.10 is resetting the theme

  - by Mengu

  i'm experiencing a strange problem with dual monitors. when i set the dual monitor via "nvidia settings" and save the setting to xorg.conf, the default unity theme and icons are turning back to gtk default. i also get an error telling me "could not apply the stored configuration for monitors" here is my xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 280.13 (buildd@yellow) Fri Aug 5 12:31:28 UTC 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Chi Mei Optoelectronics corp." HorizSync 30.0 - 75.0 VertRefresh 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 540M" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP: nvidia-auto-select +0+0, CRT: 1680x1050 +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection here is an example of what i'm talking about: http://i.stack.imgur.com/vrlW1.png how can i fix this? thanks in advance.

  Read the article

• Slight stuttering when moving windows in fresh 12.04 install

  - by Konsolkongen

  Installed Ubuntu 12.04 today and my problem is that when I'm moving the windows around my screen it doesn't feel smooth at all. Usually I can fix this by changing the refresh rate to 60Hz, but this time it doesn't help. My graphics card is a Nvidia GTX 560Ti and I've tried both the 295.40, 295.45 and 304.43 (which I'm currently using) but neither has resolved my problem. I searched around a bit and tried changing the refresh-rate using compizconfig-settings-manager and xrandr. No change using CCSM, but when I tried xrandr I got this reply: konsolkongen@konsolkongen-desktop:~$ xrandr -r 60Rate 60.0 Hz not available for this size - which is nonsense of course. This is what my xorg.conf file looks like: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 560 Ti" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1680x1050_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Any help would be greatly appreciated, my obsession with video quality can't stand stuttering like this. For what it's worth though, I don't have any screen tearing, so at least V-sync is on. Thanks.

  Read the article

• 12.10 Quantal display issues using nvidiaXineramaInfoOverride

  - by AvatarKava

  After updating to 12.10 today, my xorg.conf doesn't seem to be respected by Quantal. Not sure if this is a 'bug' or whether it's just an adjustment I have to make due to changes in the OS. When logging in, it seems Ubuntu is now recognizing only one 3840x1080 screen named "Matrox" and maximizing windows spans them across both screens. In 12.04, this configuration file successfully allowed me to override the data provided by my TripleHead2Go and maximize windows to a single monitor. Any ideas or where to start on trying to debug this? After a bit of searching, I tried to make changes according to the update here: http://www.phoronix.com/scan.php?page=news_item&px=MTEyMDk Here's where the config file sits currently: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Matrox" HorizSync 31.5 - 80.0 VertRefresh 59.9 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 260M" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "nvidiaXineramaInfo" "true" Option "nvidiaXineramaInfoOrder" "CRT-0" #Option "metamodes" "CRT: nvidia-auto-select +0+0" Option "nvidiaXineramaInfoOverride" "1920x1080 +0+0, 1920x1080 +1920+0" Option "Stereo" "0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• How to avoid using the same identifier for Class Names and Property Names?

  - by Wololo

  Here are a few example of classes and properties sharing the same identifier: public Coordinates Coordinates { get; set; } public Country Country { get; set; } public Article Article { get; set; } public Color Color { get; set; } public Address Address { get; set; } This problem occurs more frequently when using POCO with the Entity Framework as the Entity Framework uses the Property Name for the Relationships. So what to do? Use non-standard class names? public ClsCoordinates Coordinates { get; set; } public ClsCountry Country { get; set; } public ClsArticle Article { get; set; } public ClsColor Color { get; set; } public ClsAddress Address { get; set; } public ClsCategory Category { get; set; } Yuk Or use more descriptive Property Names? public Coordinates GeographicCoordinates { get; set; } public Country GeographicCountry { get; set; } public Article WebArticle { get; set; } public Color BackgroundColor { get; set; } public Address HomeAddress { get; set; } public Category ProductCategory { get; set; } Less than ideal, but can live with it I suppose. Or JUST LIVE WITH IT? What are you best practices?

  Read the article

• Zendframework / PgSQL fetchAll orderby

  - by viMaL

  i have a pgsql table with fields id, identifier, name. id serial NOT NULL, identifier character varying(16), name character varying(128) I want to fetchAll values from the table orderby identifier. but identifier is having values 12, 100, 200, 50 and after $table->fetchAll(null, 'identifier'); is giving the result 100, 12, 200, 50 but I want the result as 12, 50, 100, 200 or using a direct query?

  Read the article

• Acer Allionone Z5810 Touchscreen Issues 12.04

  - by Johannes

  I have an Acer Allionone Z5810, and I can't get the touchscreen to work after I install 12.04. Here is the lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0596:0508 MicroTouch Systems, Inc. Bus 001 Device 004: ID 04b8:0005 Seiko Epson Corp. Printer Bus 001 Device 005: ID 07ca:1336 AVerMedia Technologies, Inc. Bus 002 Device 003: ID 04ca:0058 Lite-On Technology Corp. Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 005: ID 04f2:b23f Chicony Electronics Co., Ltd xinput --list Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=9 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=10 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Lite-On Technology Corp. Wireless Device id=8 [slave keyboard (3)] ? USB 2.0 camera id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] My xorg.conf contains: nvidia-xconfig: X configuration file generated by nvidia-xconfig nvidia-xconfig: version 304.48 (buildmeister@swio-display x86-rhel47-04.nvidia.com) Sun Sep 9 21:31:39 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "TouchScreen" EndSection Section "Files" EndSection Section "InputDevice" Identifier "TouchScreen" Driver "microtouch" Option "Type" "finger" Option "Device" "/dev/ttyS3" Option "ScreenNo" "0" Option "MinX" "0" Option "MaxX" "16383" Option "MinY" "0" Option "MaxY" "16383" Option "SendCoreEvents" "yes" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• SQL SERVER – QUOTED_IDENTIFIER ON/OFF Explanation and Example – Question on Real World Usage

  - by Pinal Dave

  This is a follow up blog post of SQL SERVER – QUOTED_IDENTIFIER ON/OFF and ANSI_NULL ON/OFF Explanation. I wrote that blog six years ago and I had plans that I will write a follow up blog post of the same. Today, when I was going over my to-do list and I was surprised that I had an item there which was six years old and I never got to do that. In the earlier blog post I wrote about exploitation of the Quoted Identifier and ANSI Null. In this blog post we will see a quick example of Quoted Identifier. However, before we continue this blog post, let us see a refresh what both of Quoted Identifider do. QUOTED IDENTIFIER ON/OFF This option specifies the setting for use of double quotes. When this is on, double quotation mark is used as part of the SQL Server identifier (object name). This can be useful in situations in which identifiers are also SQL Server reserved words. In simple words when we have QUOTED IDENTIFIER ON, anything which is wrapped in double quotes becomes an object. E.g. -- The following will work SET QUOTED_IDENTIFIER ON GO CREATE DATABASE "Test1" GO -- The following will throw an error about Incorrect syntax near 'Test2'. SET QUOTED_IDENTIFIER OFF GO CREATE DATABASE "Test2" GO This feature is particularly helpful when we are working with reserved keywords in SQL Server. For example if you have to create a database with the name VARCHAR or INT or DATABASE you may want to put double quotes around your database name and turn on quoted identifiers to create a database with the such name. Personally, I do not think so anybody will ever create a database with the reserve keywords intentionally, as it will just lead to confusion. Here is another example to give you further clarity about how Quoted Idenifier setting works with SELECT statement. -- The following will throw an error about Invalid column name 'Column'. SET QUOTED_IDENTIFIER ON GO SELECT "Column" GO -- The following will work SET QUOTED_IDENTIFIER OFF GO SELECT "Column" GO Personally, I always use the following method to create database as it works irrespective of what is the quoted identifier’s status. It always creates objects with my desire name whenever I would like to create. CREATE DATABASE [Test3] I believe the future of the quoted identifier on or off is useful in the real world when we have script generated from another database where this setting was ON and we have to now execute the same script again in our environment again. Question to you - I personally have never used this feature as I mentioned earlier. I believe this feature is there to support the scripts which are generated in another SQL Database or generate the script for other database. Do you have a real world scenario where we need to turn on or off Quoted Identifiers. Click to Download Scripts Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Automatically change resolution when not in dock

  - by jwir3

  I have Ubuntu 11.04 (yep, I know it's old news) on my Lenovo W520. At home, I have a dock with dual monitors. I have a pretty decent setup - things work almost perfectly (hence the reason I'm reluctant to upgrade... that and I'm not 100% sold on Unity). Anyway, the only annoyance I have is that when I'm on travel, I use the laptop screen. When I un-dock the laptop, I need to manually go into nvidia x-server settings and change the resolution from 'Auto' to 1920x1200, or it will think I have two screens, and my mouse pointer will be able to go way off the left side of the screen. This isn't a big deal, but I need to do it every time I restart the x-server (so if I reboot, or have to kill it, etc...) What would be really nice is if there was a way for it to automatically detect whether or not there is external monitors (which it seems to do already), and switch into the mode I select, depending on which monitors are connected. Is there any way to accomplish this? I've posted my xorg.conf file for reference. # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 275.19 ([email protected]) Tue Jul 12 18:35:38 PDT 2011 #Section "Monitor" # Identifier "Monitor1" # VendorName "Lenovo" # ModelName "ThinkpadLCD" # #HorizSync 28.0 - 33.0 # #VertRefresh 43.0 - 72.0 # #Option "DPMS" #EndSection Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "DELL U2410" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro 1000M" Option "RegistryDwords" "EnableBrightnessControl=1" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-6: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-5: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +1920+419, DFP-5: nvidia-auto-select +3840+0, DFP-6: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-5: nvidia-auto-select +0+0, DFP-6: 1920x1200 +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "NoLogo" "True" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "TwinView" "1" Option "metamodes" "DFP-5: nvidia-auto-select +1920+0, DFP-6: 1920x1200 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• GCC error with variadic templates: "Sorry, unimplemented: cannot expand 'Identifier...' into a fixe

  - by Dennis

  While doing variadic template programming in C++0x on GCC, once in a while I get an error that says "Sorry, unimplemented: cannot expand 'Identifier...' into a fixed-length arugment list." If I remove the "..." in the code then I get a different error: "error: parameter packs not expanded with '...'". So if I have the "..." in, GCC calls that an error, and if I take the "..." out, GCC calls that an error too. The only way I have been able to deal with this is to completely rewrite the template metaprogram from scratch using a different approach, and (with luck) I eventually come up with code that doesn't cause the error. But I would really like to know what I was doing wrong. Despite Googling for it and despite much experimentation, I can't pin down what it is that I'm doing differently between variadic template code that does produce this error, and code that does not have the error. The wording of the error message seems to imply that the code should work according the C++0x standard, but that GCC doesn't support it yet. Or perhaps it is a compiler bug? Here's some code that produces the error. Note: I don't need you to write a correct implementation for me, but rather just to point out what is about my code that is causing this specific error // Used as a container for a set of types. template <typename... Types> struct TypePack { // Given a TypePack<T1, T2, T3> and T=T4, returns TypePack<T1, T2, T3, T4> template <typename T> struct Add { typedef TypePack<Types..., T> type; }; }; // Takes the set (First, Others...) and, while N > 0, adds (First) to TPack. // TPack is a TypePack containing between 0 and N-1 types. template <int N, typename TPack, typename First, typename... Others> struct TypePackFirstN { // sorry, unimplemented: cannot expand ‘Others ...’ into a fixed-length argument list typedef typename TypePackFirstN<N-1, typename TPack::template Add<First>::type, Others...>::type type; }; // The stop condition for TypePackFirstN: when N is 0, return the TypePack that has been built up. template <typename TPack, typename... Others> struct TypePackFirstN<0, TPack, Others...> //sorry, unimplemented: cannot expand ‘Others ...’ into a fixed-length argument list { typedef TPack type; }; EDIT: I've noticed that while a partial template instantiation that looks like does incur the error: template <typename... T> struct SomeStruct<1, 2, 3, T...> {}; Rewriting it as this does not produce an error: template <typename... T> struct SomeStruct<1, 2, 3, TypePack<T...>> {}; It seems that you can declare parameters to partial specializations to be variadic; i.e. this line is OK: template <typename... T> But you cannot actually use those parameter packs in the specialization, i.e. this part is not OK: SomeStruct<1, 2, 3, T... The fact that you can make it work if you wrap the pack in some other type, i.e. like this: SomeStruct<1, 2, 3, TypePack<T...>> to me implies that the declaration of the variadic parameter to a partial template specialization was successful, and you just can't use it directly. Can anyone confirm this?

  Read the article

• Install lubuntu 12.04 on an old Dell c600 : Video issues

  - by maniat1k

  I am trying to install lubuntu on an old laptop. I use the 386 alternate instalation of it, because it has only 256mb ... All when ok so when I start up the lubuntu the screen splits between 1024x768 and 800x600... its very horrible to use =). Ok I do this: lspci and found an ATI Rage mobility M3. 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02) So I tryied the old xorg way to edit the missing resolution, but it does not work:... Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. Rage Mobility M3 (AGP)" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection on an brand new xorg.conf... Do an init 6 to see if X take the changes, but nothing habbened: also tryed to do pkg-reconfigure -changedir /etc/X11 (where I created the new xorg.conf) and nothing.. removed the X conf from /tmp.. also do sudo apt-get update / upgrade... and no luck... UPDATE Updated to 12.04. This an edited xorg fr old dells like mine: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg # xorg.conf for dell latitude c600 by A. Howlett and others Section "ServerLayout" Identifier "Default Server Layout" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "Generic Mouse" "AlwaysCore" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/Speedo" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/artwiz-aleczapka" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/util" FontPath "/usr/local/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts/aquafont" FontPath "/usr/share/fonts/artwiz" FontPath "/usr/share/fonts/artwiz-aleczapka-en" FontPath "/usr/share/fonts/corefonts" FontPath "/usr/share/fonts/freefont" EndSection Section "Module" Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "pex5" Load "record" Load "xie" Load "v4l" Load "freetype" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbModel" "pc104" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "CorePointer" Option "Device" "/dev/psaux" Option "Protocol" "PS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Generic Mouse" Driver "mouse" Option "SendCoreEvents" "true" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "laptop LCD" VendorName "Dell" ModelName "Latitude C600" HorizSync 31.5-48.5 VertRefresh 40-70 EndSection Section "Device" Identifier "Video0" Driver "r128" VideoRam 8192 Option "EnablePageFlip" "true" Option "AGPFastWrite" "true" Option "AGPMode" "2" BusID "PCI:01:00:0" Screen 0 Option "Display" "FP" Option "MonitorLayout" "CRT, LFP" EndSection Section "Screen" Identifier "Screen0" Device "Video0" Monitor "laptop LCD" DefaultDepth 16 Subsection "Display" Depth 32 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >